SEARCH
NEW RPMS
DIRECTORIES
ABOUT
FAQ
VARIOUS
BLOG

 
 
Changelog for liblz4-1-1.9.4-2.8.x86_64.rpm :

* Wed Mar 08 2023 mpluskalAATTsuse.com- Build AVX2 enabled hwcaps library for x86_64-v3
* Tue Aug 16 2022 jengelhAATTinai.de- Update to release 1.9.4
* Decompression speed on high-end ARM64 platform is improved, by ~+20%.
* For the specific scenario of data compressed with -BD4 setting (small blocks, <= 64 KB, linked) decompressed block-by-block into a flush buffer (like lz4 CLI does), decompression speed is improved ~+70%.
* For compressed data employing the lz4frame format (native format of lz4 CLI), it\'s possible to ignore checksum validation during decompression, resulting in speed improvements of ~+40% . This capability is exposed at both CLI (see --no-crc) and library levels.
* Mon Oct 04 2021 pgajdosAATTsuse.com- version 1.9.3 fixes also CVE-2021-3520 [bsc#1185438]
* Mon Nov 16 2020 jengelhAATTinai.de- Update to release 1.9.3
* api: LZ4_decompress_safe_partial() now supports unknown compressed size
* api: improved LZ4F_compressBound() with automatic flushing
* cli: multiple files are compressed now using the legacy format
* Wed Oct 16 2019 pgajdosAATTsuse.com- enable testsuite- verbose build
* Tue Oct 15 2019 pgajdosAATTsuse.com- version update to 1.9.2
* decompression functions were reading a few bytes beyond input size
* api: lz4frame initializers compatibility with c++, reported by AATTdegski
* cli : added command --list, based on a patch by AATTgabrielstedman
* fixes CVE-2019-17543 [bsc#1153936]
* Thu Jun 06 2019 jengelhAATTinai.de- Update to new upstream release 1.9.1
* Decompression speed was improved by about 12% (x86/x64).
* New option `lz4 --list` to inspect the block type, checksum information, compressed and decompressed sizes (if present). The command is limited to single-frame files for the time being.
* Fri Oct 12 2018 astiegerAATTsuse.com- lz4 1.8.3:
* minor decompression speed improvement (~+2%) with gcc
* fix corruption in v1.8.2 at level 9 for files > 64KB under rare conditions
* Add new command --fast
* api: LZ4_decompress_safe_partial() now decodes exactly the number of bytes requested
* Thu Jun 28 2018 astiegerAATTsuse.com- lz4 1.8.2:
* speed inprovemtns for compression and decompression
* fix compression compatible with low memory addresses
* fix decompression segfault when provided with NULL input
* cli: new command --favor-decSpeed
* cli: benchmark mode more accurate for small inputs
* Wed Feb 07 2018 avindraAATTopensuse.org- Update to new upstream release 1.8.1.2
* Most visible new feature is support for dictionary compression
* Support is now more formally added on the API side within lib/lz4frame_static.h. It\'s early days, and this new API is tagged \"experimental\" for the time being.
* Support is also added in the command line utility lz4, using the new command -D. The behavior of this command is identical to zstd, should you be already familiar.
* lz4 doesn\'t specify how to build a dictionary. All it says is that it can be any file up to 64 KB.
* This approach is compatible with zstd dictionary builder, which can be instructed to create a 64 KB dictionary.
* Improved performance at ultra settings (levels 10+).
* These levels receive a new code, called optimal parser, available in lib/lz4_opt.h.
* New parser uses less memory (from 384KB to 256KB), performs faster, compresses a little bit better (not much, as it was already close to theoretical limit), and resists pathological patterns which could destroy performance.
* New parser is directly compatible with lower compression levels, which brings additional benefits: + Compatibility with LZ4_
*_destSize() variant, which reverses the logic by trying to fit as much data as possible into a predefined limited size buffer. + Compatibility with Dictionary compression, as it uses the same tables as regular HC mode
* In the future, this compatibility will also allow dynamic change of compression level.
* Small set of bug fixes and improvements: + perf : faster and stronger ultra modes (levels 10+) + perf : slightly faster compression and decompression speed + perf : fix bad degenerative case + fix : decompression failed when using a combination of extDict + low memory address + cli : support for dictionary compression (-D) + cli : fix : lz4 -d --rm preserves timestamp + cli : fix : do not modify /dev/null permission as root + api : _destSize() variant supported for all compression levels- partial cleanup with spec-cleaner- drop lz4-use-shlib.diff, breaks build- misc spec cleanups - remove Makefile fix - build and install separately - New URL
* Fri Aug 25 2017 jengelhAATTinai.de- Update to new upstream release 1.8.0
* cli: fix: do not modify /dev/null\'s permissions.
* cli: added POSIX separator \"--\" for specifying that all following arguments are non-options.
* cli: restored -BX command enabling block checksum.
* API: added LZ4_compress_HC_destSize() and LZ4F_resetDecompressionContext().
* API: lz4frame: negative compression levels trigger fast acceleration.
* API: lz4frame: ability to control block checksum and dictionary ID.
* API: fix: expose obsolete decoding functions
* API: experimental: lz4frame_static.h: new dictionary compression API
* doc: Updated LZ4 Frame format to v1.6.0, restoring Dictionary ID field in header.- Add lz-export.diff
* Tue Aug 15 2017 ddissAATTsuse.com- Use official upstream repository; (boo#1053910)
* Wed Jul 05 2017 jengelhAATTinai.de- Update to new upstrema release 1.7.5 (2017-01-03)
* back to the old version scheme
* lz4hc: new compression levels 10-12- Remove lz4-soversion.diff (not needed), lz4-killdate.diff (no longer needed)
* Mon Jan 16 2017 dimstarAATTopensuse.org- Add baselibs.conf: provide liblz4-1_7 as -32bit compatibility package, required by systemd-32bit.
* Sat Apr 02 2016 jengelhAATTinai.de- Update to new upstream release 131 (library 1.7) (boo#973735)
* slightly improved decoding speed
* lz4frame API is included in liblz4
* new -m command line option to compress multiple files
* new lz4 and lz4hc compression API (old one retained)
* Fri Nov 28 2014 jengelhAATTinai.de- Update to version 1.4+svn124
* LZ4F_compressBound() may be called with NULL preferencesPtr
* LZ4_loadDict now returns the dictionary size instead of 1 on success- Add lz4-soversion.diff to address ABI changes
* Wed Oct 01 2014 jengelhAATTinai.de- Update to version 1.3.1+svn123
* Added a pkgconfig file
* Fix a LZ4HC streaming bug
* Updated the framing specificaiton to 1.4.1
* Wed Jul 16 2014 jengelhAATTinai.de- Update to svn revision 119, set version to 1.2.0 (based upon Makefile contents; it\'s still odd to see the 1.4 Windows release)
* Provide LZ4 as a shared library- Remove lz4-automake.diff (no longer deemed necessary)- Add lz4-use-shlib.diff
* Mon Nov 25 2013 dsterbaAATTsuse.com- update to svn 108, set version to 1.4 (current windows release) - added manpage - minor code updates
* Tue Sep 03 2013 jengelhAATTinai.de- Update to new snapshot svn102; set version as 1.3.3 in accordance with latest Windows releases.
* Add lz4-killdate.diff (kill the ungodly __DATE__s)
* Thu Feb 21 2013 jengelhAATTinai.de- I hate %makeinstall (it fails all the SLES builds), kill it!
* Sat Mar 17 2012 jengelhAATTmedozas.de- Initial package for build.opensuse.org
 
ICM