Changelog for perl-SNMP-Info-3.970.1-lp156.1.1.noarch.rpm :

* Thu Feb 29 2024 Tina Müller - updated to 3.970001 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.970001 (2024-02-28) [BUG FIXES]
* fix uninitialized warnings in CiscoASA parse_inetaddress although the type is ipv6z the entry has no zone identifier Version 3.97 (2024-02-26) [BUG FIXES]
* fix invalid IPv6 addresses returned by ipv6_addr for entries without a zone identifier caused by off-by-one error in parse_inetaddress Version 3.96 (2024-02-26) [ENHANCEMENTS]
* return IPv6 addresses of type ipv6z consistent by all IPv6 address methods
* add parse_inetaddress method to IPv6 for parsing RFC4001 InetAddress OIDs used to index the IP-MIB and refactor its methods to use it where appropriate
* override parse_inetaddress for Cisco ASA which doesn\'t conform to RFC4001 because it is missing the number of octets in InetAddress, seems it\'s indexed like the CISCO-IETF-IP-MIB
* #512 add psu2 to foundry, poe mib has been renamed (needs netdisco-mibs 4.039)
* Tue Sep 05 2023 Tina Müller - updated to 3.95 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.95 (2023-09-02) [ENHANCEMENTS]
* #491 Dell - Take into account OS10
* #492 F5 - Update the module to correctly retrieve interfaces
* #499 aoscx power over ethernet support
* #500 pretty format 2.5gbps speeds [BUG FIXES]
* partial revert #484 and replace with Cisco specific CiscoAgg::agg_ports_propvirtual
* Wed Jul 26 2023 Tina Müller - updated to 3.94 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.94 (2023-07-25) [BUG FIXES]
* partial revert #484 and replace with Cisco specific CiscoAgg::agg_ports_propvirtual Version 3.93 (2023-07-14) [ENHANCEMENTS]
* #484 add Aggregate::agg_ports_ifstack to CiscoAgg::agg_ports
* Tue Feb 21 2023 Tina Müller - updated to 3.92 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.92 (2023-02-20) [NEW FEATURES]
* #450 Hirschmann switch support
* #463 Netonix switch support [ENHANCEMENTS]
* new() accepts hashref as well as bare list of arguments [#] #475 additional recognition of Allied switches
* #477 additional recognition of Cisco 9xxx switches [BUG FIXES]
* #460 always return $info instance to allow error() inspection
* #464 check in case non numeric key in cache befor inc
* #474 workaround for aruba-cx link aggregation
* Fri Aug 19 2022 Tina Müller - updated to 3.89 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.89 (2022-08-18) [BUG FIXES]
* add Regexp::Common to dependencies
* fix tests for i_vlan_membership_untagged Version 3.88 (2022-08-17) [NEW FEATURES]
* Add i_subinterfaces for VLAN subinterfaces in Layer3::Juniper
* Add i_vlan and i_vlan_membership_untagged to Layer3::Juniper based on ifChassisLogicalUnit
* Sat Aug 13 2022 Tina Müller - updated to 3.87 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.87 (2022-08-12) [NEW FEATURES]
* PortAccessEntity/IEEE8021-PAE-MIB module support [ENHANCEMENTS]
* #462 SNMP::Info::Layer3::PaloAlto to include layer 2
* #461 Expose lldLocChassisId as $lldp->lldp_loc_id
* Update CiscoStats.pm for Amsterdam IOS-XE release [BUG FIXES]
* #470 avoid error if Juniper VLAN not in bp_index Version 3.86 (2022-08-10) [BUG FIXES]
* #468 Cisco dotted subinterfaces had incorrect vlan assigned Version 3.85 (2022-08-02) [NEW FEATURES]
* Add i_subinterfaces for VLAN subinterfaces in CiscoVTP
* Tue Jul 05 2022 Tina Müller - updated to 3.84 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.84 (2022-07-04) [NEW FEATURES]
* Add support for HW Group STE whitespace monitoring devices
* Thu Mar 17 2022 Tina Müller - updated to 3.82 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.82 (2022-03-16) [NEW FEATURES]
* add Cisco BGP MIB support to all Cisco Layer 3 devices
* Fri Oct 08 2021 Tina Müller - updated to 3.81 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.81 (2021-10-07) [ENHANCEMENTS]
* #400 change IPv6 decode warning to be debug-only
* #394 Recognise hyphenated cumulus version strings
* #401 add DLink layers always 2+3
* #377 i/if_ignore cleanup [BUG FIXES]
* #443 trapeze and nws deep recursion fix
* #378 fix several uninitialized vars
* #374 undefined error from H3C class
* Thu Sep 23 2021 Tina Müller - updated to 3.80 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.80 (2021-09-22) [NEW FEATURES]
* layer3::fortinet now supports link aggregation mapping
* Add support for Riverbed SteelheadEx and Steelfusion (#438) [ENHANCEMENTS]
* change default class for Cisco from Layer3::Cisco to Layer3::CiscoSwitch [ENHANCEMENTS]
* Fix typo in Whiterabbit.pm (#439)
* Fri Sep 10 2021 Tina Müller - updated to 3.78 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.78 (2021-09-08) [BUG FIXES]
* Fix undefined value error in Bridge.pm i_vlan
* Sun Sep 05 2021 Tina Müller - updated to 3.77 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.77 (2021-09-04) [ENHANCEMENTS]
* set_i_vlan support for Ruckus/Brocade/Foundry
* Wed Aug 25 2021 Tina Müller - updated to 3.74 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.74 (2021-08-24) [NEW FEATURES]
* Support changing PVID on Arista switches (#429)
* Support for Whiterabbit devices [ENHANCEMENTS]
* Patch H3C broken node-vlan mapping
* Tue Jun 29 2021 Tina Müller - updated to 3.73 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.73 (2021-06-28) [BUG FIXES]
* fix packaging error Version 3.72 (2021-06-28) [NEW FEATURES]
* Support for Aruba CX switches
* IEEE802_Bridge module [BUG FIXES]
* #403 don\'t use layer3::dell for layer3::aruba devices
* layer2::aerohive supports version numbers above 9
* Sat Nov 28 2020 Tina Müller - updated to 3.71 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.71 (2020-11-27) [NEW FEATURES]
* #386 Teltonika RUT9XX support (jeroenvis) [ENHANCEMENTS]
* #398, 411 more ubiquiti cleanup and support for er-12 (lbegnaud & inphobia) [BUG FIXES]
* #409, 410 Don\'t add AUTOLOAD generated methods in symbol table
* #372, 375 fix lldp on nx-os6 (inphobia)
* Wed Oct 16 2019 - updated to 3.70 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.70 (2019-10-15) [NEW FEATURES]
* #361 Siemens Scalance switch support
* #365 Ciena Layer3 support
* #368 DOCSIS cable modem support [ENHANCEMENTS]
* #350 ubiquiti version string cleanup (LBegnaud)
* #352 duplex support for ciscosb
* #353 report all vendor names in lowercase
* #353 sprinkle \"use warnings\" and \"use strict\" around
* #358 prefer checkpoint mib over net-snmp mib (earendilfr)
* #359 detect newer ios-xe using codenames (Christoph Neuhaus)
* #367 test using latest MIBs version dynamically
* #370 smarter Q-BRIDGE handling
* poe power usage & mac address for ciscosb [BUG FIXES]
* #353 doc fixes: report all required mibs for each module as based on code
* #353 include fixes: don\'t include modules already imported from parent classes
* #355 fix #252, don\'t think 6char devices names are mac addresses
* #363 clean return calls in code
* #364 strip newline from neoteris os_ver, fixes netdisco #647
* Mon Apr 29 2019 Stephan Kulow - updated to 3.68 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.68 (2019-04-28) [NEW FEATURES]
* initial support for redlion cellular routers (inphobia) [ENHANCEMENTS]
* use pulsesecure mib in layer7::neoteris instead of juniper-ive
* Sun Apr 21 2019 Stephan Kulow - updated to 3.67 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.67 (2019-04-20) [NEW FEATURES]
* #323 initial Lenovo / cnos support (inphobia)
* #317 #326 DOCSIS Head End support (Pyro3d) [ENHANCEMENTS]
* add v3 Context update() tests for net-snmp 5.8+
* support INFO_TRACE and SNMP_TRACE environment variables for Debug
* #324 clean up exinda and add regression test [BUG FIXES]
* #294 snmp::info should show full class used
* #297 perl 5.28 removal of \"use vars\"
* #306 fix incorrect interfaces for d-link
* #319 make fortinet return a useful interface name (inphobia)
* #320 improve duplicate interfaces() fixup
* #321 clean interface descriptions of null and trailing space
* #322 #327 full fix for aerohive tests
* #325 lazy load legacy RFC1213-MIB only if needed
* #496 fix for aerohive wireless clients support (inphobia)
* Mon Mar 25 2019 Stephan Kulow - updated to 3.66 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.66 (2019-03-24) [NEW FEATURES]
* #316 add support for IS-IS routing protocol (pyro3d) [ENHANCEMENTS]
* switch to Alien::SNMP for travis builds (ollyg) [BUG FIXES]
* clarify MRO usage
* Mon Feb 25 2019 Stephan Kulow - updated to 3.65 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.65 (2019-02-24) [ENHANCEMENTS]
* #296 expand CiscoAgg to also include LACP (inphobia)
* #308 update VyOS enterprise OID
* #310 bring layer3::oneaccess up to date for oneos6. (inphobia)
* Add two more HP 2930F models (JeroenvIS) [BUG FIXES]
* #295 make CiscoAgg return ifindex instead of bp_index (inphobia)
* more documentation fixes + whitespace cleanup in all files
* Mon Dec 31 2018 Stephan Kulow - updated to 3.64 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.64 (2018-12-30) [NEW FEATURES]
* #283 support for Exinda/GFI traffic shapers (inphobia) [ENHANCEMENTS]
* #282 Aerohive base MAC lookup (inphobia) [BUG FIXES]
* many documentation fixes (inphobia)
* Thu Dec 06 2018 Stephan Kulow - updated to 3.63 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.63 (2018-11-25) [ENHANCEMENTS]
* #280 update to retrieve Aerohive serial
* #271 update os_ver for Alcatel-Lucent (stromsoe) [BUG FIXES]
* #273 remove old ADTRAN modules not in netdisco-mibs Version 3.62 (2018-10-29) [ENHANCEMENTS]
* #278 Support for Cisco Firepower Threat Defense
* #275 Document peth_port_ifindex for Junipers
* #274 Add peth_port_ifindex override for Junipers
* #270 Add support for additional Mikrotik models
* Add HP 3810M, 2930M, 2930F and 2540 series switches [BUG FIXES]
* #265 Fix typos in L3::Huawei
* Sun Jul 22 2018 cooloAATTsuse.com- updated to 3.61 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.61 (2018-05-09) [ENHANCEMENTS]
* #255 IPv6 support - Set the transport-specifier if given an IPv6 address
* #195 IP address table - IPv4 Address Table will use the IP-MIB::ipAddressTable if the deprecated IP-MIB::ipAddrTable doesn\'t return results [BUG FIXES]
* #261 EIGRP Peer Neighbor Formatting / Munge
* #252 Unpack binary MAC if present in cdp_port
* Fix SNMPv1 cdp_run check Version 3.60 (2018-05-06) [ENHANCEMENTS]
* #263 detect Aerohive ap250 & ap230 models (inphobia) [BUG FIXES]
* #140 LLDP fixes - treat remote port type of \'local\' as an interface name if the remote port id doesn\'t look like an index
* Fix potential issue in enumeration of LLDP reported system capabilities supported by the remote system due to the \'lldpRemSysCapSupported\' leaf name being defined in multiple MIBs
* Thu May 03 2018 cooloAATTsuse.com- updated to 3.59 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.59 (2018-05-01) [NEW FEATURES]
* #214 SNMP::Info Device models Genua, ATMedia, Liebert [ENHANCEMENTS]
* Capture base MAC in L3::Huawei
* Change _lldp_addr_index to a method so it can be properly overridden in subclasses [BUG FIXES]
* Capture fan ans power supply status in L3::Huawei when description is not available Version 3.58 (2018-04-29) [NEW FEATURES]
* #202 Support for Aerohive access points [ENHANCEMENTS]
* #220 Alcatel-Lucent / Nokia SR 7750 missing port information. Add duplex, fan, and power supply status, as well as, module inventory to L3::Timetra
* Add fan and power supply status to L3::Huawei
* Override ifMTU with max frame size when applicable in L3::Huawei [BUG FIXES]
* Correct POE power module to port mapping in L3::Huawei
* Fri Apr 27 2018 cooloAATTsuse.com- updated to 3.57 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.57 (2018-04-26) [ENHANCEMENTS]
* #145 Patch for Huawei (robwwd)
* #228 Huawei aggregate link support
* POE and duplex admin support added to L3::Huawei
* Significant performance improvement validating AUTOLOAD methods [BUG FIXES]
* IEEE802dot3ad portlist is indexed with a dot1dBasePort, cross reference with dot1dBasePortIfIndex
* Fix for macsuck in Cisco classes introduced in 3.55 caused by inheritance issue in CiscoStack
* Mon Apr 23 2018 cooloAATTsuse.com- updated to 3.56 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.56 (2018-04-22) [BUG FIXES]
* Fix table methods when defined as an OID which will not completely translate to a fully qualified textual leaf
* Fri Apr 20 2018 cooloAATTsuse.com- updated to 3.55 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.55 (2018-04-19) [NEW FEATURES]
* #260 Oneaccess (robwwd)
* #259 Add ERX (Old Juniper E-Series JunOSe) Support (robwwd)
* #258 Add support for Arbor devices (robwwd)
* #253 Nexans switch support (paecker)
* #142 Sixnet Switch Support [ENHANCEMENTS]
* #117 Recognition for HP Blade switches (J R Binks)
* #196 Support for powerconnect 8164F
* Refactor Layer3::Dell for better support of newer models
* Increase capture of i_vlan on router interfaces in L3::Cisco
* Factor out logic to determine serial number from ENTITY-MIB in Layer2 and Layer3 to new method entity_derived_serial in Entity class and added new method entity_derived_os_ver in Entity class to determine OS version in a similar manner [BUG FIXES]
* #67 Juniper EX4300 Missing/Wrong information
* #61 ZyXEL (X)GS1900 family MIB - Fix loop in layers method
* Fix ISA in AMAP and EDP classes
* Add missing MIB in L2::Trapeze, L2::NWSS2300, and L3::Dell
* Fix gigabit logic in i_duplex_admin() of CiscoStack
* Prevent potential undefined warnings in i_speed_admin() of L2::C2900 and ports() of L3::C3550
* Correct validation and IID/key used in mau_set_i_speed_admin() and mau_set_i_duplex_admin() of MAU
* Correct typo in MIB leaf names in L3::Aironet
* Don\'t use MIB leafs that are not-accessible according to MIB NOTE: Fixing this logic now results in methods on MIB leafs specified as not-accessible failing validation in _validate_autoload_method()
* Fri Apr 06 2018 cooloAATTsuse.com- updated to 3.54 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.54 (2018-04-01) [NEW FEATURES]
* #141 Avocent ACS files for correct discovery in Netdisco
* Add support for Avocent ACS 5K/6K/8K terminal servers in Layer1::Cyclades [ENHANCEMENTS]
* #215 Nokia/Alcatel-Lucent 7705 LLDP
* #220 Alcatel-Lucent / Nokia SR 7750 missing neighbors
* Improve Layer3::Timetra model detection [BUG FIXES]
* Fix logic in Layer1::Asante i_up() method
* Fix MIB leaf typo in IPv6
* Don\'t use MIB leafs that are not-accessible according to MIB
* Fix logic for determining if MIB leaf supports set operations NOTE: Fixing this logic now results in methods starting with set_ on MIB leafs without Write or Create access failing validation in _validate_autoload_method() Version 3.53 (2018-03-22) [NEW FEATURES]
* #12 add Cisco PortFast support via CiscoStpExtensions::i_faststart_enabled [ENHANCEMENTS]
* Report serial/version on Netgear FSM (paecker)
* Add test harness and expand developer test coverage
* Add back the base (RFC) MIBs for when net-snmp does not have them builtin [BUG FIXES]
* Fix AUTOLOAD / can() bug that could result in DESTROY being redefined and dynamic methods not being added to the symbol table. version 3.52 (2018-03-19) [ENHANCEMENTS]
* set fallback for nonmatching interfaces in Cumulus class
* better interface naming for Ubiquiti
* modify mock utility to work under a perlbrew environment
* Thu Mar 15 2018 cooloAATTsuse.com- updated to 3.50 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.50 (2018-03-14) [ENHANCEMENTS]
* #198 Add Support for Gigamon devices [BUG FIXES]
* #226 Avaya VSP devices - no ifAlias
* #227 Remove bogus can() check in _set()
* Fix SNMP::Info::IEEE802dot3ad when more than 1 LAG
* Mon Mar 05 2018 cooloAATTsuse.com- updated to 3.49 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.49 (2018-03-03) [ENHANCEMENTS]
* Better Layer3::Cumulus interface naming [BUG FIXES]
* Use GitHub for MIBs download for testing, instead of sf.net version 3.48 (2018-03-03) [ENHANCEMENTS]
* Add Layer3::Cumulus for Cumulus Networks devices
* Wed Feb 28 2018 cooloAATTsuse.com- updated to 3.47 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.47 (2018-02-27) [ENHANCEMENTS]
* Add LLDP-MIB::lldpXMedRemInventoryTable methods
* Tue Feb 20 2018 cooloAATTsuse.com- updated to 3.46 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.46 (2018-02-17) [ENHANCEMENTS]
* Add method to get err-disable cause for interfaces on Cisco
* Sat Feb 17 2018 cooloAATTsuse.com- updated to 3.45 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.45 (2018-02-14) [ENHANCEMENTS]
* Enable Layer3::Foundry for Brocade VDX platform [BUG FIXES]
* #222 #238 #239 handle BayStack switches with port index 128 (zoeloe)
* Tue Feb 13 2018 cooloAATTsuse.com- updated to 3.44 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.44 (2018-02-12) [ENHANCEMENTS]
* Improve F10 OS version detection (laelly)
* Better IPv6 prefix derivation
* Wed Feb 07 2018 cooloAATTsuse.com- updated to 3.43 see /usr/share/doc/packages/perl-SNMP-Info/Changes
* Mon Dec 18 2017 cooloAATTsuse.com- updated to 3.39 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.39 (2017-12-17) [ENHANCEMENTS]
* #236 Enhanced Ubiquiti device support (L. Begnaud)
* add HP J9774A model (H. Teulahti) [BUG FIXES]
* fix scripts (F. Mass)
* fix CiscoASA typos (laelly)
* Tue Oct 24 2017 cooloAATTsuse.com- updated to 3.38 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.38 (2017-10-23) [ENHANCEMENTS]
* Layer2::Airespace several newer 802.11 data rates added [BUG FIXES]
* #232 Improve generic Info::Layer3 serial number detection
* Wed Jul 12 2017 cooloAATTsuse.com- updated to 3.37 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.37 (2017-07-11) [ENHANCEMENTS]
* Layer3::Juniper fixed to return os_ver for JUNOS 14.x and higher
* Fri Jun 30 2017 cooloAATTsuse.com- updated to 3.36 see /usr/share/doc/packages/perl-SNMP-Info/Changes
* Mon Nov 21 2016 cooloAATTsuse.com- updated to 3.34 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.34 (2016-11-20) [ENHANCEMENTS]
* Support Cisco IPS Modules homed on the Cisco ASA (M. Kraus) [BUG FIXES]
* Serial number on Nexus 9372 (genereic check for ID before using) (M. Caines)
* Thu May 05 2016 cooloAATTsuse.com- updated to 3.33 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.33 (2016-04-27) [ENHANCEMENTS]
* Move author-only tests to xt directory so they aren\'t run on installation by users [BUG FIXES]
* Correct device serial number reporting for Cisco Nexus 5k switches with software version >= 7 version 3.32 (2016-04-26) [ENHANCEMENTS]
* Add 200 Mbps and 2.0 Gbps aliases to SPEED_MAP
* Add Palo Alto support
* Add VMware support
* Support for propMultiplexor as ifType
* Add device MAC to APC UPS
* [#61] Report APC model for PDU products
* Removed DeviceMatrix from the distribution [BUG FIXES]
* Support undefined (noSuchInstance) values in Offline mode
* Do not init table cache if Cache provided by user
* Avoid deep recusion when AUTOLOAD and carp collide
* Detect Cisco VG350s as L3 devices instead of APs
* fix for \'Use of inherited AUTOLOAD for non-method SNMP::Info::Layer2::HP::agg_ports_ifstack() is deprecated\'
* Workaround in IPv6.pm to deal with possibly incorrect IPV6-MIB implementations
* [#71] AUTOLOAD typo-catcher search for SNMP::Info no longer anchored
* [#70] Respect version/comm/secname on passed Session obj
* Wed Jan 27 2016 cooloAATTsuse.com- updated to 3.31 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.31 (2016-01-22) [ENHANCEMENTS]
* Support for CiscoSB OS and Version (D. Tuecks)
* SONMP support for Enhanced Topology Table
* Add support for channelized interfaces in L3::Passport [BUG FIXES]
* Correct link to MIB tarball
* Thu Nov 19 2015 cooloAATTsuse.com- updated to 3.30 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.30 (2015-11-16) [ENHANCEMENTS]
* RT #106254: Add new sysObjectID mapping for Ubiquiti [BUG FIXES]
* Correct link to MIB tarball
* Correct port indexing of newer VSP 4K and 8K in L3::Passport
* Statistics in the sysIfxStatTable are 64-bit counters, so they should override the 64-bit methods.
* Fri Oct 16 2015 cooloAATTsuse.com- updated to 3.29 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.29 (2015-10-13) [ENHANCEMENTS]
* Add IPv6::ipv6_addr() method to map IPv6 interface address indexes to actual addresses
* Add support for (remote) IPv6 addresses to LLDP::lldp_addr()
* Add LLDP::lldp_ipv6() and LLDP::lldp_mac() so that remote management addresses of specific types can be requested
* Mon Sep 21 2015 cooloAATTsuse.com- updated to 3.28 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.28 (2015-06-18) [ENHANCEMENTS]
* Add Layer3::Huawei class for Huawei Quidway switches
* Modified generic Layer3::Cisco class: use community based indexing if the device returns a value for vtpVersion [BUG FIXES]
* Correct port indexing of VSP 4K in L3::Passport version 3.27 (2015-05-05) [ENHANCEMENTS]
* Cisco Aironet PSU information
* Only log adding mibdirs at debug level 2 [BUG FIXES]
* [#221] Drop Cisco Voice VLAN 4096
* Mon Apr 13 2015 cooloAATTsuse.com- updated to 3.26 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog