Changelog for python311-netmiko-4.2.0-48.1.noarch.rpm :

* Sun Aug 27 2023 Martin Hauke - Update to version 4.2.0 Bug Fixes and Improvements
* Expanded and improved SSH autodetect support.
* Various bug fixes.
* Improve Huawei driver.
* MikroTik driver improvements.
* Fortinet driver improvements.
* IOS-XR driver improvements.
* Add simpler solution for Paramiko disabled_algorithms issue.
* Add IPv6 support for SNMP autodetect..
* Convert over to use Poetry (eliminate setup.py).
* Improve send_config_set() and read_timeout behavior.
* Improve behavior of normalize_linefeeds() method. Add argument to disable this behavior.
* Add check_state argument to enable() method that allows for disabling the initial check_enable_mode() call. New Drivers or Expanded Driver Support
* Add support for Arris CER.
* Add support for Casa CMTS.
* Add support for Adva AOS FSP 150 F2 and F3.
* Add support for Hillstone StoneOS.
* Add support for Teldata CIT.
* Add support for Cisco S200.
* Add support for Ericsson MINI-LINK 66XX & 63XX.
* Add support for SCP on Ubiquiti EdgeRouter.
* Mon Jul 10 2023 Matej Cepl - Clean up SPEC file.
* Thu Jul 06 2023 ecsos - Add %{?sle15_python_module_pythons}
* Sun Sep 18 2022 Martin Hauke - Update to 4.1.2: New Driver
* Audiocode Driver. Bugs and Improvements
* Improve disconnect behavior.
* Improve encoding behavior.
* Fix textfsm dependency issue by pinning to 1.1.2.
* Proposed Cisco WLC fix for session_preparation().
* Added Versa FlexVNF platform to SSH autodetect.
* Nokia global_cmd_verify default fix.
* Fix issue with redispatch not working due to no data.
* Fix generator bug in send_config_set.
* Fix to accommodate single character prompts in set_base_prompt.
* Adding check that key_file exists if use_keys is True.
* Minor session_log test updates.
* Tue Jul 19 2022 Dirk Müller - update to 4.1.1:
* add Nokia SRLinux Support
* Add Mikrotik File Transfer Support
* Performance Improvements
* Performance Improvements for Linux Driver
* Improve Performance Graphs
* Bug Fixes / Improvements
* Better Error Messages for Incompatible Python Versions
* Improve Huawei Driver
* Improve Huawei VRPv8 Driver
* Improve HPE ProCurve Driver
* Improving Junos context stripping patterns
* Improve MikroTik Driver
* Fix for Extreme ERS login issues
* Minor update to threading calls in Netmiko Tools
* Increase save_config default timeout for Cisco-based platforms
* Wed Apr 27 2022 Martin Hauke - Update to vedrsion 4.1.0 Performance Improvements
* Improve performance in Junos config_mode() and check_config_mode() methods.
* Improve performance on disconnect() method.
* Improve slow NX-OS disconnect()
* Improve slow Junos disconnect() Bug Fixes and other Improvements
* Update VyOS save_config()
* Fix read_timeout being excessively long in case where check_config() fails
* Fix Huawei regular expression issue
* Fix Huawei login issue
* Improve Juniper enter_cli_mode()
* Fix issue with Nokia SROS MD-CLI having square bracket data being removed
* Fix issue with \'write memory\' on ubiquity edge switches
* Fix extreme exos read-only account issue
* Add Cisco WLC _send_command_w_yes() method
* Fix Cisco IOS, IOS-XE, and IOS-XR abbreviating prompt in config mode
* Fix Aruba controller paging issue
* Fix fortigate autodetect
* Fixing HP Procurve session_preparation issue on repeated connection Python Version Support
* Remove PY3.6 Support
* Add PY3.10 Support
* Wed Mar 30 2022 Martin Hauke - Update to vedrsion 4.0.0 Backwards incompatible and other major changes
* Convert send_command to use read_timeout.
* Convert send_command_timing to use read_timeout and last_read
* Add type hints and mypy support
* Relocate exceptions module to netmiko.exceptions (was ssh_exceptions)
* Add read_timeout argument to send_config_set
* Convert netmiko-tools to be an entry point and directly a part of Netmiko library
* Creating a new internal Channel class
* Restructure read methods
* Implement NoEnable and NoConfig inheritance classes to standardize no-config and no-enable behavior Major new features
* Add send_multiline() method
* Add send_multiline_timing() method
* Create new Netmiko factory function named ConnLogOnly
* Create new Netmiko factory function named ConnUnify New Drivers
* Cisco Viptela Driver
* Dell SONiC Driver
* Cisco S300 Telnet Driver
* Allied Telesis AlliedWare Plus Driver
* Zyxel Driver
* Extreme Tierra OS Driver
* Extreme EXOS Secure Copy Support Minor Enhancements
* Centralize standard no_auth code into SSHClient_noauth
* Remove vendored Textfsm library code
* Add a shim for cisco_xe to use cisco_ios in ntc-templates
* WLC add method send_command_w_yes to handle show command that still prompts for pagination
* Platforms added to SSH autodetect
* Expand ANSI escape code stripping
* Expand SNMP autodetect support Bug Fixes
* Fix read ahead issue with read methods
* Fix ntc-templates directory structure issue
* Aruba OS fix for hostname changes
* Fix flexvnf enter cli and prompt issue
* Mikrotik driver improvements and fixes
* Fixing IOS-XR confirm prompting issue during commit
* Fix the pan-os acknowledgment banner
* Fix Juniper ScreenOS accept issue
* Add support for Username: for telnet login on ProCurve
* Change ArubaOS command to disable paging
* utf-8 encoding for session_log
* Add bypass_commands support to send_config_set to disable cmd_verify
* Fix disconnect() call for Dlink DS driver
* Prevent secret from being leaked to debug log
* Fix send_command() read issue where data spanned the deque
* Improve set_base_prompt behavior
* Increase the default conn_timeout to 10 seconds improve Paramiko behavior on slow connections Performance Improvements
* Fix IOS-XR performance issues
* Implement Netmiko performance improvements for a large set of drivers (about half the drivers)
* Fixing Linux very slow disconnect issue
* Sat Apr 24 2021 Martin Hauke - Update to version 3.4.0 New Features
* Add error_pattern argument to send_config_set() and send_config_from_file() to allow configuration to stop when pattern is detected.
* Add run_ttp method to support more complex TTP interactions.
* Juniper performance improvements.
* ASA performance improvements.
* Add telnet support to AdtranOS New Drivers
* Allied Telesis AlliedWare Plus
* Brocade Fabric OS
* C-DOT CROS
* Ericsson IPOS
* Supermicro SMIS Bug fixes/improvements
* Fixing Palo Alto line repaint issue
* Fixing F5 TMSH disconnect process
* Fix IOS-XR exit_config_mode issue
* Fixing some enable method state issues
* Fixing SR-OS remote file size
* Fixing issue with remote_file_size parsing failure
* Fix ASA enable() issue in session_preparation
* Fix Yamaha enter issue on exit enable mode
* Fix Yamaha telnet enter issue
* F5 TMOS driver update
* Fix newlines on Cisco NX-OS
* Fixes an issue with ssh _autodetect_remote_version
* Fix tplink_jetstream to support cryptography 3.1+
* Allowing Dell OS10 to support hyphen or space
* Fix authentication exception handling
* Improve ssh_autodetect so most common command happens first.
* Fix dell_force10 autodetect
* Tue Mar 02 2021 Martin Hauke - Update to version 3.3.3 New Drivers
* Add Ericcson IPOS Support
* Adtran Telnet Support Performance Improvements
* Juniper Performance Improvements
* Cisco ASA Performance Improvements Bugs and Enhancements
* Improve Authentication Exception Handling
* FIX Cryptography Lib Change Issue
* Thu Oct 01 2020 Martin Hauke - Update to version 3.3.2 New Features
* Add support for PIP installable ntc-templates
* Add support for TTP templates Performance Improvements
* Cisco NX-OS Performance Improvements
* Cisco IOS-XR Performance Improvements
* Arista Performance Improvements New Drivers
* Cisco FTD Driver
* Ubiquity EdgeRouter
* TPLink JetStream Bug Fixes
* Secure Copy Progress Bar fix for get Operation- Update to version 3.3.1
* Mon Aug 31 2020 Martin Hauke - Update to version 3.3.0
* NewDriver: Netgear ProSafe
* Minor change to Netgear Prosafe
* Support for Adtran OS
* Changed SSH terminal height in CiscoXrBase
* XR commit comment change
* Fix broken \"enable\" on Nokia SR-OS driver
* Adding SR-OS to the tests
* Fix WLC conn_timeout issue
* Improve Session Preparation Behavior
* Performance Improvements for IOS and IOS-XE
* Sat Aug 01 2020 Martin Hauke - Update to version 3.2.0
* Fixing disable_paging and set_terminal_width so cmd_verify is not used as we are still in session_preparation phase.
* Add Centec-switch platform
* Sixwind Driver Update
* Disable cmd_verify on Comware
* check text with config_md5
* Add support for vendor/os: broacom_icos.
* Bypass automatic _open() call
* Added HPE Comware support
* Tell aruba connection to strip ansi codes from switches
* Fixing Arista check_config_mode bug with hostname change
* Ansi insert line for ProCurve and Aruba
* Add progress bar for Secure Copy
* Add connection timeout argument (conn_timeout)
* Tue May 19 2020 Martin Hauke - Update to version 3.1.1 New Drivers/Platforms
* UnifiSwitchSSH
* Huawei OLT
* Huawei SmartAX Bugs and Improvements
* Nokia SR-OS SCP Support
* Improve terminal width behavior
* Fix some issues related to cmd_verify
* Expanded autodetect support
* Mon Mar 23 2020 Martin Hauke - Update to version 3.1.0: New Platforms / Transports
* D-Link DGS/DES
* WatchGuard Firebox
* Sophos SG Firewalls
* Huawei Telnet Support Bug Fixes/Enhancements
* Add cmd_verify argument to send_command
* Add global_cmd_verify argument to ConnectHandler
* Thu Jan 16 2020 Martin Hauke - Upate to version 3.0.0: Key enhancements/changes
* PY3.6+ support only (all support for PY27 removed)
* Significant reliability improvements to reduce loss of session state problems
* Add support for direct use of TextFSM template
* Allow custom socket timeout in SCP file_transfer
* Improve MD5 hashing mechanism in SCP checks
* Add sock parameter support
* Increase default banner_timeout to 15 New Drivers
* Eltex ESR
* Juniper ScreenOS
* Ruijei RGOS Driver Updates
* Huawei driver improvements
* Ciena driver improvements
* NX-OS driver improvements
* Nokia SR-OS driver improvements
* HP ProCurve driver improvements
* Juniper Junos driver improvements
* Fortinet banner fix
* Ruckus handling of failed enable
* Linux enable/sudo improvements