Changelog for sigrok-dumps-20210616.cbf9f8e-1.1.noarch.rpm :

* Sun Dec 12 2021 stefan.bruensAATTrwth-aachen.de- Fix no-longer matching rpmlintrc filters (Badness is no longer part of the matched string)- Fix python3 shebangs- Modernize spec file, update URL
* Sun Dec 12 2021 stefan.bruensAATTrwth-aachen.de- Update to version 20210616.cbf9f8e:
* doc: update IRC reference to Libera.Chat
* seven_segment: expand the alphabet and show unknown characters
* spi: commit SQI captures with four I/O data lines
* ds3231: add Maxim DS3231 real time clock example captures
* dcc: Add captures for DCC model railway control
* mcp23017: Add dumps of the microchip mcp23017 i/o expander
* ir_nec: Add dumps for corner cases (timing tolerance, last packet decode)
* sle44xx: extend the README for the SLE4442 captures
* sle44xx: add smart card dumps for the SLE4442 chip
* avr_isp: Add dumps for program page, EEPROM, lock memory types.
* sdq: commit SDQ example data
* st7735: Add dump with unknown command
* st25r39xx: Add dumps of HydraNFC Shield v2
* ir_nec: add capture for extended NEC protocol
* ir_sirc: add captures for Sony IR (SIRC)
* spdif: Add more example files.
* rgb_led_ws281x: Add WS281x_RGBW Test Data
* caliper: rename dump files and probes
* caliper: added example dumps (mm and inch, positive and negative)
* xy2-100: Add two dumps
* sae_j1850_vpw: Add VPW sample data from P01 PCM
* pjon/pjdl: add capture of minimal PJON frames over PJDL link layer
* nrf905: Move into the spi/ subdirectory.
* Add Nordic Semiconductor nRF905 dumps
* ad5626: Move into the \"dac\" subdirectory.
* ad5626: Fix pin names as per datasheet.
* ltc2422: Fix pin names as per datasheet.
* Add dumps for AD7920.
* Add dumps for AD5626.
* Add dumps for LTC2422.
* Add dumps for LTC2607.
* Add dumps for ADXL345.
* sdcard: Add a few more sample files.
* cjtag: Extract two smaller snippets.
* cjtag: Add two example files.
* dmx512: Add/update URLs and device descriptions.
* dmx512: Added additional dumps
* misc/vcd: introduce VCD example files with not yet supported features
* ps2: Add an example of PS/2 keyboard communication, update README
* ac97: Add some Analog Devices AD1981A dumps.
* uart: Add a few error cases (EMC-induced glitches).
* grbl: Fix channel names, add another capture.
* Add Grbl CNC captures.
* hdcp: Add an unknown example file.
* rc-6: initial commit of 3 RC-6 dumps
* trekstor_ebr30_a_uart.sr: Remove long trailing idle phase.
* signature: add dumps and README
* DMX dump of a µDMX interface
* NFC ISO/IEC 15693 vicinity reader / tag capture with demodulation
* Add two TDM audio samples
* Add dumps for Amulet LCD UART protocol
* nes-gamepad: add generated dumps
* Add dumps short GPIB transfers to HP53131A, HP33120A, Keithley 2015
* can: remove duplicated dump
* microwire: Add a Microchip 93LC46B dump.
* hd44780: README: Fix probe indices (0-7 for FX2 LAs).
* hd44780: Add 9 additional dumps
* seven_segment: Add dumps
* mrf24j40: Add a few dumps from an MRF24J40MA based ECG.
* mrf24j40: Move files to sensormote/ subdir.
* add NXP PCA9571 decoder test .sr dumpfiles
* modbus: Add a wizmodbus dump.
* modbus: Add a few flowmeter dumps.
* spi_mode: cmds: Add a small README.
* spi_mode: Add a CMD17 example.
* Add cp2110_serial_over_hid_ut612_snippet.sr.
* Add cp2102_setup_with_outdata_nak.sr.
* enc28j60: Adds trace and README
* Rename 2ch-16bit-16khz to 2ch-32bit-8khz.
* atsha204a: Add dumps for atecc508a and update README
* ROHM BH1750FVI: Added dumps for digital ambient light sensor.
* sdcard_spi: Add a real sample of CMD24.
* sdcard_spi: add CMD24 dumps (write single block)
* example dumps for CC1101
* onewire/ds2408: add dumps and README
* flexray: add dumps for cold start and dynamic frames
* flexray: add dump and README
* can_fd/arbitrary_traffic/README: Minor capitalization fixes.
* can_fd: add dumps with BRS + extended ids
* rtc_dallas_ds1307: Add sigrok session file for demonstrating bugfixes.
* can_fd: add dumps and README
* hd44780: move HD44780 dump into the display/ subdirectory
* Add example dumps for the FSK decoder.
* Added dump for Xicor X2444M, nonvolatile static RAM.
* uart: add dumps for LIN
* winbond_w25q80d: Extract chip_erase_and_writes.sr snippets.
* Add Winbond W25Q80DV captures
* Add sample HUB75 LED matrix capture
* adesto_at25sf041: Expand README a litte.
* Adesto AT25SF041 serial flash captures
* trekstor_ebr30_a: README: Document I2C slave addresses.
* Add a few Maxim MAX3420E SPI/USB captures.
* modified miller encoding
* Added HDMI-CEC protocol dumps
* usb_power_delivery: Add new captures
* Samples for the decoder for STM8 series MCUs SWIM protocol.
* Add trace with Acer AL711 TFT behind DP-to-HDMI and HDMI-to-VGA adapters
* Truncate end of trace only showing the idle bus, correct swapped pin names
* Truncate end of trace only showing the idle bus
* mdio: add sample data for \"read without address\" (bug 1258)
* Add a MIPS EJTAG dump.
* Add a few OOK dumps.
* Add a few UART dumps with unitsize=4 for testing purposes.
* Add dumps for the Microchip ATSHA204A crypto module
* onsemi_cat24c256: Add a snippet file.
* Add two ChronoVu LA8/LA16 dumps.
* Add ON Semi CAT24C256 example dump.
* st7735: Add a snippet file.
* ws2812b_neopixel24: Add a WS2812B NeoPixel24 snippet file.
* Add Intel MCS-48 example dump
* Add ST7735 dump.
* Add an Adesto AT45DB161E dump.
* Add two SSD1306 dumps.
* Add some Maplin L95AR (PT2262 remote control encoder) files.
* Add nonstandard_eeproms/sda2506/
* files.
* i2c: manipulate recording to not specify a sample rate
* graycode: create smaller recording without sample rate spec
* stepper_motor: manipulate recording to not specify a sample rate
* i2s: create smaller recording without sample rate spec
* uart: Add some flow control (RTS#) examples.
* realtek_alc655: Add an even shorter snippet.
* hd44780: commit a dump for the Hitachi HD44780 display controller
* usb: Add capture for serial-over-HID with CP2110 to UT612 (ES51919)
* maple_bus: Add a sample capture of Maple bus
* onewire: Add a DS2432 dump.
* morse: demodulated synthetic Wikipedia signal
* graycode: examples
* ac97: Add a dump from a Realtek ALC655.
* Add a square wave digital + analog capture.
* Added stm32_dfu_install.sr
* Add USB SETUP with STALL during DATA phase dump.
* Add an Atmel AT24C16C dump (DreamSourceLab DSLogic).
* Add a few more Aosong AM2302 dumps.
* rding_temper: Extract a smaller snippet file.
* Add some more Epson 8564JE RTC dumps.
* Add an ATC 93LC56 Microwire EEPROM dump.
* Add a Microchip 93LC56B Microwire EEPROM dump.
* demo: Add dump with logic and analog samples.
* Add some 24-LED NeoPixel (WS2812B) dumps.
* Add some Analog Devices AD5258 digital potentiometer dumps.
* eeprom24xx: Add an ATtiny13 I²C example dump.
* ade7758: README: Rearrangements and consistency fixes.
* spi/ade7758: examples without CS pin
* First dump: proof CMD23 before CMD18. Other dumps will follow.
* Add an ST M93C66 Microwire EEPROM dump.
* i2c/sensiron_sht2x: extra dump with more detail.
* Add more Sainsmart DDS120 dumps, including analog traces.
* Add missing sainsmart_dds140_powerup.sr file.
* Add a Microchip 24LC64 dump (Rocktech BM102).
* Add a Microchip 24LC64 dump (SainSmart DDS140).
* Add a Microchip 24LC64 dump (SainSmart DDS120).
* Add a Microchip 24LC64 dump (Instrustar ISDS205X, scope mode).
* Add a Microchip 24LC64 dump (Instrustar ISDS205A).
* Add a Microchip 24LC02B dump (Hantek 6022BL, scope mode).
* Add a Microchip 24LC02B dump (Hantek 6022BL, LA mode).
* Add a Microchip 24LC02B dump (Instrustar ISDS205X, LA mode).
* Add a Microchip 24LC02B dump (Hantek 6022BE).
* add 1-Wire example using Dallas DS18B20 devices
* Add an example Sensirion SHT3x dump.
* Add an example Sensirion SHT2x dump.
* Add an example Sensirion SHT7x dump.
* eeprom_24xx: add sample Xicor X24C02 capture
* Fixed a typo in a uart/from_analog/README
* Added an oddball UART trace, taken with an analog oscilloscope.
* Add a DALI example.
* Add a DSI example.
* Added a capture of config and 4pin output of a MAX7301.
* gpib: Add a sample capture of serial GPIB (IEC Bus)
* Added ADF4351 captures
* license: remove FSF postal address from boiler plate license text
* avr_pdi: add dumps for ATxmega flash programming (PDI)
* spiflash: Add Macronix MX25L1605D single-command dumps.
* spiflash: Add FIDELIX FM25Q32 single-command dumps.
* spiflash: Add DualSPI flash dump during a write in flash.
* spiflash: Add QuadSPI flash example/dump.
* Sun Nov 06 2016 opensuse-packagingAATTopensuse.org- Update to version 20161104.8d9e030:
* Add some ssi32 samples
* Add some more MIDI dumps.
* spi/ssi32: add README with setup description
* midi: Add some more dump files.
* uart: Add a dump file demonstrating overlapping RX/TX.
* gpib: Add an example capture file.
* uart: add dump files to demonstrate number of data bits
* spiflash: Add some Fidelix FM25Q32 dumps.
* spi: Add some dumps with various bitwidths.
* ps2: Add an initial PS/2 keyboard dump.
* Tue Oct 25 2016 opensuse-packagingAATTopensuse.org- Update to version 20161023.b485187:
* Add a few DMX512 dumps.
* Add some ssi32 samples
* Add some more MIDI dumps.
* spi/ssi32: add README with setup description
* midi: Add some more dump files.
* uart: Add a dump file demonstrating overlapping RX/TX.
* gpib: Add an example capture file.
* uart: add dump files to demonstrate number of data bits
* spiflash: Add some Fidelix FM25Q32 dumps.
* spi: Add some dumps with various bitwidths.
* Tue Oct 25 2016 stefan.bruensAATTrwth-aachen.de- initial packaged version