Changelog for raspberrypi-firmware-2023.04.25-176.1.noarch.rpm :

* Thu May 04 2023 Dominique Leuenberger - Add _multibuild to define 2nd spec file as additional flavor. Eliminates the need for source package links in OBS.
* Thu Apr 27 2023 Guillaume GARDET - Update to 543692d23 (2023-04-25):
* firmware: arm_loader: Set local-bd-address if 6 zeroes found
* firmware: arm_loader: Really check for a zero local-bd-address See: raspberrypi/linux#5437
* firmware: arm_dt: Don\'t overwrite existing i2c aliases See: raspberrypi/linux#5428
* firmware: arm_loader: Reduce CMA warning severity See: #1807
* Wed Apr 05 2023 Guillaume GARDET - Update to c4122b870 (2023-03-22):
* firmware: gencmd: Add a fallback to mailbox interface if vchiq is not available
* firmware: Handle 64-bitness of named kernels See: #1792
* firmware: bootloader: Fix automatic 64bit selection on Pi3s See: https://forums.raspberrypi.com/viewtopic.php?p=2089764#p2089764
* firmware: bootloader: Raise CMA cap to 512MB on a 64-bit Pi4
* firmware: bootloader: Prefer 64-bit kernels on Pi 4s See: https://forums.raspberrypi.com/viewtopic.php?p=2088935#p2088935
* firmware: platform: clocks: Replace m2mc with hdmi for state machine clock on 2711
* Fri Mar 03 2023 Guillaume GARDET - Update to 489d3e2d0 (2023-02-22):
* firmware: video_decode: Convert the active lines, not the padded buffer
* firmware: il isp: Correct histogram masks for updated group 2 regions
* Thu Jan 19 2023 Guillaume GARDET - Update to 2578acb89 (2023-01-18):
* kernel: overlays: i2c-sensor: Add mpu6050 and mpu9250 See: raspberrypi/linux#5325
* firmware: arm_dispmanx: Correct support for NV21, and add support for YV16 See: #1767
* firmware: arm_dispmanx: Fix FKMS to adopt pre-multiplied alpha See: #1773
* firmware: hdmi_2711: Make some clock setup unconditional so booting without hdmi setup is possible See: https://forums.raspberrypi.com/viewtopic.php?t=345362
* firmware: Actually rebuild firmware described in previous commit
* firmware: Add D flag to video= cmdline option when hotplug is forced See: https://forums.raspberrypi.com/viewtopic.php?p=2067109#p2067109
* Fri Dec 23 2022 Guillaume GARDET - Update to 0a7ea702 (2022-12-12):
* firmware: arm_loader: PWM1 is not available on GPIO 45
* firmware: power: Always read the uncached voltage for AIN and USB_PD See: https://forums.raspberrypi.com/viewtopic.php?p=2059832#p2059832
* firmware: Use new SDHCI controller instead of legacy arasan See: #1763
* Mon Nov 21 2022 Guillaume GARDET - Update to b8a7365 (2022-11-18):
* firmware: arm_loader: Improvements to Compute Module audio See: https://forums.raspberrypi.com/viewtopic.php?p=2052680
* firmware: arm_loader: Fix GPIO bank 1 support See: #1756
* Thu Oct 27 2022 Guillaume GARDET - Update to 13691cee9 (2022-10-26):
* firmware: arm_loader: Add vcmailbox support for 256bit OTP customer device key See: raspberrypi/usbboot#163
* firmware: il: video_encode: MJPEG is not conditional on being RASPBERRYPI_FULL
* Wed Oct 19 2022 Guillaume GARDET - Update to ab37ef59f (2022-10-18):
* firmware: ldconfig: Add all, none, tryboot section support to autoboot.txt for start.elf
* firmware: arm-dt: bootloader: Pass the original partition number when booting a ramdisk
* firmware: arm_loader: HAT EEPROM support for GPIO bank 1 See: #1756
* Tue Oct 18 2022 Guillaume GARDET - Update to bfbd42ef2 (2022-10-14):
* firmware: isp: Run ISP without hi-res output buffer
* firmware: arm_dt: Export the bootloader EEPROM RSA public key via device-tree
* firmware: Add tryboot A_B mode
* firmware: il: isp: Correct order buffers were returned in
* firmware: board_info: Fix Pi 400 PHY addresses See: #1754
* Tue Oct 04 2022 Guillaume GARDET - Update to 2b3cef2f4 (2022-09-30):
* firmware: isp: Workaround for very unpleasant artifacts in the sharpening block
* firmware: arm_loader: Raise maximum gzipped kernel size
* firmware: arm-loader: Indicate tryboot status via /proc/device-tree/chosen/bootloader/tryboot
* firmware: arm_loader: Increase TFTP block size to 1468 bytes See: raspberrypi/rpi-eeprom#375
* firmware: Add kernel= logging
* firmware: camera_auto_detect changes See: #1750
* firmware: Fix USB boot See: #1744
* firmware: video decode/MJPEG fixes See: http://git/vc4/vc4/-/merge_requests/1548
* firmware: power: Restore VEC and PIXEL clocks after HDMI domain power cycle See: raspberrypi/linux#4962
* firmware: arm_loader: Never set warranty bit See: #1741
* firmware: vcfw: camera_subsystem: Fix loop counter for powering up devices See: https://forums.raspberrypi.com/viewtopic.php?t=338917
* firmware: ldconfig: Add [cm4s] conditional
* firmware: platform: Set min_frequency for HDMI SM clock on Pi0-3
* firmware: power: Fix failover to secondary PMIC interface functions See: https://forums.raspberrypi.com/viewtopic.php?t=338429
* firmware: arm_loader: Correct GPIO expander initial state via SET_GPIO_CONFIG See: raspberrypi/linux#5107
* firmware: Disable BT flow control pins for Pi3 rev1.3
* firmware: arm_loader: initramfs over NVME fix See: #1731
* firmware: arm-dt: Export log buffer addresses to /proc/chosen/log
* firmware: arm_loader: Fix GET_CLOCKS to not overwrite client buffer See: #1688
* firmware: arm_loader: Declare program_sdhost_use_dma
* Fri Jul 08 2022 Guillaume GARDET - Update to df569e0 (2022-07-04):
* firmware: video_decode: Stop decode on a colourspace change See: raspberrypi/linux#5059
* firmware: video_encode: Fix subsample image alignment assert
* firmware: tc358762_DSI: Don\'t start the PV and DSI before the HVS
* firmware: hello_pi: Fix some build issues See: #1728
* firmware: arm_dt: camera_auto_detect cam0 flag needs to look at Unicam instance, not port
* firmware: platform: over-voltage Zero 2 W by two pips See: #1723
* firmware: arm_loader_dvfs: Only add clocks to boostable list when they have been boosted See: #1726
* firmware: arm_dt: Try upstream DTB files if downstream absent
* firmware: arm_loader: Delay the USB controller switchover
* firmware: Fix for vc_image YUYV family to YUV422 planar conversion function
* firmware: vcgencmd display_power and camera_auto_detect fixes
* firmware: variants: Add mjpg_encode to the standard firmware image
* firmware: arm_loader_dvfs: Support CLOCK_HDMI as boostable clock See: raspberrypi/linux#5016
* firmware: dtblob: Use a cached alias to reduce boot time
* firmware: hdmi: Reduce the number of EDID retries if hotplug is not detected
* firmware: arm_loader: Support longer file paths See: #1720
* firmware: arm_loader_dvfs: Make arm only see its own boosts, fixed and min clocks
* firmware: dtoverlay: Fix path rebasing and exports
* firmware: dtoverlay: Fix clang warnings
* firmware: dtoverlay: Add support for string escape sequences See: https://forums.raspberrypi.com/viewtopic.php?t=330792
* firmware: isp: R and B order must be swapped when reading VC_IMAGE_RGBA32 into the ISP See: http://git/vc4/vc4/-/merge_requests/1430
* Fri Mar 04 2022 Martin Wilck - Install modprobe.conf files to %_modprobedir (bsc#1196275, jsc#SLE-20639)
* Wed Mar 02 2022 Guillaume GARDET - Update to 231daece7c (2022-03-01):
* firmware: board_info: Handle misprogrammed 3B rev 1.2s
* firmware: mmal: Add mapping for IL OMX_IndexParamBrcmEnableIJGTableScaling param
* firmware: Handle overlay parameters embedded in overlay_map.dtb See: raspberrypi/linux#4860
* firmware: firmware: Add HDMI_PORTS trait
* firmware: arm_dt: Fix rpi-poe overlay parameters See: #1689
* firmware: jpeghw: Skip APP0 AVI1 headers, regardless of length See: https://forums.raspberrypi.com/viewtopic.php?p=1975448
* firmware: camera_subsystem: Report ignored interfaces due to libcamera See: #1679
* firmware: Export os_prefix, overlay_prefix, rsts and boot-mode on all models
* firmware: vcfw/hdmi_i2c: Initialise all instances from hdmi_i2c_init
* firmware: mmal: Add mapping for IL OMX_IndexParamBrcmEnableIJGTableScaling param See: raspberrypi/linux#4669
* Tue Jan 25 2022 Guillaume GARDET - Update to 9c04ed2c1a (2022-01-24):
* firmware: platform: Limit max clock-id to CLOCK_VEC for now See: #1688
* Mon Jan 24 2022 Guillaume GARDET - Update to 827fdd0736 (2022-01-20):
* firmware: dtoverlay: Don\'t mix non-fatal errors and offsets See: #1686
* firmware: arm_loader: Load vl805 overlay on CM4 See: https://forums.raspberrypi.com/viewtopic.php?t=326088
* firmware: gencmdserv: Add mailbox interface to gencmd
* firmware: improve firmware camera detection
* firmware: arm-loader: Fix kernel8.img selection on 2837 with arm_64bit=1 See: #1671
* firmware: ldconfig: Discard subsequent chunks from a truncated line See: #1669
* firmware: cec: Fail set_passive_mode when running with kms
* firmware: Firmware: Remove PWM/audio traits for CM4
* firmware: usb: Fix non-BCM2711 MSD support See: raspberrypi/usbboot#102
* Wed Dec 22 2021 Guillaume GARDET - Update to 1a0297bfbf (2021-12-01):
* firmware: board_info: Add upstream dtb names for cm1 & 3
* firmware: board_info: Add upstream dtb name for cm4 See: #1660
* firmware: platform: Allow users to disable camera boot HMAC check See: #1657
* firmware: clock: 2711: Fix potential API issue in 2711 VCO setup
* firmware: arm_loader: Enable USB MSD boot mode on Zero 2 W
* firmware: isp: Fix Rec.709 colour space problems
* Mon Nov 22 2021 Guillaume GARDET - Fix deps for raspberrypi-firmware-config and raspberrypi-firmware-config-camera
* Wed Nov 17 2021 Guillaume GARDET - Add raspberrypi-firmware-config-camera flavor - boo#1192047
* Wed Nov 17 2021 Guillaume GARDET - Update to 12bc6e3677 (2021-11-16):
* firmware: dtoverlay: Rebase aliases in overlays like labels
* firmware: isp: Set core/vpu min clock to 320Mhz during ISP operation
* firmware: arm_loader: Enable watchdog early if wanted See: #1651
* firmware: hello_fft: Update outdated link to V3D spec
* firmware: hello_fft: Remove unused function declaration See: #1645 See: raspberrypi/userland#710
* firmware: platform: Declare CM4\'s SIO_1V8_SEL and SD_PWR_ON See: raspberrypi/Raspberry-Pi-OS-64bit#188
* firmware: platform: Fix incorrect turbo voltage scaling on Pi0 See: raspberrypi/documentation#2255
* firmware: ISP: Fix magenta colour in right hand image of stereo pair See: https://forums.raspberrypi.com/viewtopic.php?t=321089
* firmware: platform: Remove licence on VP6, VP8, Theora, and FLAC See: raspberrypi/linux#4661
* firmware: arm_loader: Allow VEC clock to be controlled by arm
* firmware: userland: Reduce debug_sym error messages See: https://forums.raspberrypi.com/viewtopic.php?f=98&t=322238
* firmware: arm_dt: Increase maximum line length to 98 See: raspberrypi/linux#4638
* firmware: video_decode: i/p port enable/disable without o/p active could stall See: RPi-Distro/vlc#48 See: Hexxeh/rpi-firmware#272 See: #1637
* firmware: clock-2711: Limit PLLB VCO frequency to the high range
* firmware: arm_dt: Export the boot-mode, partition and usb state via device-tree See: #1621
* Tue Oct 05 2021 Guillaume GARDET - Update to b5257da58c (2021-09-30):
* firmware: arm_loader: Allow non-optional reads of current clock See: #1619
* firmware: dispmanx: Demote null eptr from vcos_verify to no warning See: raspberrypi/linux#4592
* firmware: filesystem: sdcard: Probe FAT type in GPT ESD partitions
* firmware: tvservice: Add check to warn when running with kms
* firmware: filesystem: sdcard: Fix Hybrid GPT partitions See: #1465
* firmware: video_decode: Ensure all buffers are flushed before port disable completes
* firmware: arm_loader: Allow hvs interrupt during SET_NOTIFY_DISPLAY_DONE
* firmware: arm_display: Allow null buffer in successful call See: raspberrypi/linux#4540
* Tue Sep 14 2021 Guillaume GARDET - Update to b80f36b3fb (2021-09-13):
* firmware: hdmi_2711: Use HDMI block REPEAT_PIXEL instead of PV See: https://forum.libreelec.tv/thread/24415-le-10-beta-for-i4-force-hdmi-resolution
* firmware: DSI display autodetection for kms
* firmware: arm_dt: Load overlays for detected cameras
* firmware: Make more use of the user-warnings DT property
* firmware: arm_loader: Consider required flags from GET_CLOCK_RATE See: #1598
* firmware: arm_loader: Make most arm clock requests required See: #1598
* firmware: firmware: Disable VLL loading from file system See: #1605
* firmware: video_decode: Use the ISP instead of vc_image_convert
* firmware: video_decode: Correct support for YVU formats using ISP
* firmware: arm_dt: Limit CMA to 256MB if total_mem < 2GB or gpu_mem > 256MB See: #1603
* firmware: hdmi_cec: Remove TX/RX SW_INIT on power_on See: Hexxeh/rpi-firmware#267 See: https://www.raspberrypi.org/forums/viewtopic.php?p=1895082#p1895082
* firmware: cec: Avoid sending messages with kms See: raspberrypi/linux#4460
* firmware: Revert: video_decode: Use the ISP instead of vc_image_convert
* firmware: isp: Set the YUV420/YVU420 format stride to 64 byte
* arm_loader: Add message to release firmware framebuffer
* firmware: video_decode: Use the ISP instead of vc_image_convert
* firmware: hdmi-2711: Wait for HDMI hardware scheduler to activate in HDMI mode
* firmware: bcm_host: Recognise all Pi 4 variants, add BCM2711 See: raspberrypi/userland#695
* firmware: PoE+ HAT support See: raspberrypi/linux#4367
* firmware: arm_loader: Use Pi4 bootloader MAC_ADDRESS if set
* firmware: platform: Apply ARM thermal throttling rules on BCM2711
* firmware: dt-blob.dts: Correct HDMI HPD and EMMC_ENABLE for CM4 See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&p=1858516
* firmware: vcfw/hdmi: CUSTOM modes used for FKMS didn\'t set RGB quant range correctly See: #1580
* firmware: platform: Remove build-time constant for MICROVOLTS_PER_PIP
* firmware: Pi400: Reduce MII clock freq when probing ethernet PHY
* firmware: isp: Ensure the VRF is locked when setting up video colour denoise See: raspberrypi/libcamera-apps#19
* firmware: isp: Remove custom EV mappings from camera tunings
* firmware: Add support for board-type=0xXX conditional filters in bootloader, bootcode and firmware
* firmware: Two UART1 patches See: #1566
* firmware: arm_loader: kernel_old=1 should force kernel_address=0 See: #1561
* firmware: scalerlib: Fix offset applied to x coordinate of YUV10COL image See: https://forum.kodi.tv/showthread.php?tid=361164&pid=3024654#pid3024654
* firmware: vcfw/power: Add a new latch for power_pad_control See: #1552
* firmware: board-info: Fix memsize on 3B+
* firmware: Move core to PLLA and support accurate clk108 See: xbmc/xbmc#19263
* firmware: board_info: Separate memory size from OTP field encoding
* firmware: power: Swap DA9090 ADC assignments to match XR77004
* firmware: vl805: Remove redundant log statement and fix warning
* firmware: power: Fix DA9090 ADC1 register definition
* firmware: arm_loader: Only report clocks arm has set, not siblings
* firmware: arm_loader: Don\'t report clocks set as turbo side effect of arm clock
* firmware: arm_loader: 2711: gpu clocks are not dependant
* firmware: platform: Need to clear cached versions of get_max_clock_internal vars
* firmware: video_decode: For VC1/WMV with no signalled header bytes, use start of 1st buffer See: raspberrypi/linux#4113
* Fri Apr 09 2021 Matthias Brugger - Use smbios overlay to get minimal SMBIOS information through dmidecode (bsc#1183079)
* Tue Mar 16 2021 Nicolas Patricio Saenz Julienne - Fix previous change. No need to set DWC2 in host mode. OTG works fine on production CM4 IO boards. It was being tested earlier on a pre-release development board. (bsc#1183241)- Run pre_checkin.sh, which fixed some style issues.
* Mon Mar 15 2021 Nicolas Patricio Saenz Julienne - Set CM4\'s DWC2 in host mode by default (bsc#1183241)
* Fri Mar 12 2021 Nicolas Patricio Saenz Julienne - Update to 0591568b29 (2021-03-10) (bsc#1183444):
* firmware: video_decode lockup handling
* firmware: isp: Initialise extras to avoid vpitch being random
* firmware: usb: Fix dropouts with USB ethernet gadget
* firmware: imx477: Allow long exposures for the binned modes.
* firmware: arm_dispmanx: Use ALPHA_MIX flag
* firmware: power: Refactor the interface to the PMICs
* firmware: platform: vl805: Get BAR2 address from PCIe BAR2 registers
* firmware: arm_loader: Return all borrowed DMA channels
* Wed Mar 10 2021 Nicolas Patricio Saenz Julienne - Fix typo s/pannel/panel/
* Mon Mar 08 2021 Nicolas Patricio Saenz Julienne - Enable bluetooth over PL011 by default (jsc#SLE-17223)- Enable VC4 by default on RPi4 (jsc#SLE-12151)
* Wed Jan 27 2021 Nicolas Patricio Saenz Julienne - Use disable-v3d overlay, it isn\'t ready for users to use but soon good enough for a technology preview. (jsc#SLE-15928)
* Fri Jan 22 2021 Nicolas Patricio Saenz Julienne - Update to 051e5e1be8 (2021-01-21) (jsc#SLE-16616):
* firmware: Export bootloader config via device-tree
* firmware: ISP: Colour denoise
* firmware: platform: Define DVFS modes and change default to be fixed AVS voltage
* firmware: arm_loader: Auto-select 64-bit for kernel8.img
* firmware: hdmi: Throttle auto-i2c register writes to avoid PWM audio underrun
* Fri Jan 15 2021 Guillaume GARDET - Update to c78f3ef4 (2021-01-15):
* firmware: isp: Fix handling of different YUV colour spaces
* firmware: poe_hat: Actually close the I2C handle
* Firmware: undo previous reverts
* firmware: Revert firmware: HAT/I2C updates
* firmware: firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 formats
* firmware: audioplus: Fix hang when switching destination See: #1516
* firmware: HAT/I2C updates
* firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 format
* firmware: dmalib: Keep 40-bit DMA clear of L2 alias
* firmware: DSI interrupt fixes, and HDMI SM clock for deep colour
* Wed Dec 16 2020 Guillaume GARDET - Update to 8a5549c (2020-12-15):
* firmware: dmalib: Allow sdcard to borrow channel 6 See: #1511 See: Hexxeh/rpi-firmware#251 See: https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=294932
* Tue Dec 15 2020 Guillaume GARDET - Update to 8cd7665 (2020-12-14):
* firmware: Use DMA40 for PWM audio
* firmware: imx477: Replace existing 720p120 mode with a new 1332x990 120fps mode
* firmware: arm_loader: Allow max_framebuffers=0 to disable framebuffers See: #1507
* Wed Dec 09 2020 Nicolas Patricio Saenz Julienne - Update to 919aee0ed7 (2020-12-08):
* firmware: Switch DA9121 PMIC to PWM mode when ARM > 600 MHz
* firmware: xhci: Don\'t reset BCM2711 XHCI from filesys in start.elf
* firmware: platform: Avoid vco issue with low arm_freq_min on Pi0-3
* Thu Oct 29 2020 Nicolas Patricio Saenz Julienne - Remove vl805-firmware-loader overlay as it now reached upstream.
* Thu Oct 29 2020 Guillaume GARDET - Update to 5f95dfda (2020-10-22) - boo#1178262
* firmware: hdmi: Timeout HDMI EDID reads
* firmware: arm_ldconfig: Don\'t invalidate the dcache for most of memory See: #1445
* firmware: arm_loader: Allow arm to see force_turbo and uart boosts
* bootcode: usb: Fix USB init for 2835 bootcode.bin
* firmware: arm_loader: Update armstubs with those from PR 117 … See: raspberrypi/tools#117
* firmware: Revert sdcard: Reduce SD read overhead
* firmware: arm_loader: Add GET/SET_VPU_VECTOR mailbox calls
* firmware: arm_loader: enable simple_fb iff there is a display See: raspberrypi/linux#3878
* firmware: arm_loader: Mark V3D early boost as for the ARM See: #1469
* Thu Oct 01 2020 Guillaume GARDET - Update to e7464dd (2020-09-30):
* firmware: platform: Add support for SCB clock and set to 250MHz
* firmware: Revert arm_loader: Move first call to set_turbo after arm->start
* firmware: arm_ldconfig: GZIP-compressed ARMv8 kernel support
* arm_ldconfig: Fix kernel8 decompression See: #1467
* firmware: arm_ldconfig: Restore the fallback load address See: #1467
* firmware: ilcamera: Disable timeouts on trigger sink devices
* firmware: genet: Flush RBUF/TBUF and clear mac-address on stop See: raspberrypi/linux#3850
* firmware: dmalib: Add support for 40-bit 2d memcpy
* firmware: sdcard: Reduce SD read overhead
* firmware: sdhost_arasan: Increase time threshold before suspend
* firmware: video_decode: Only shutdown codec on both ports being disabled …
* firmware: vc_image_helper: Avoid misaligned exception due to uninitialised pointer
* firmware: arm_loader: Make arm clock accesses only see their own boosts See: #1469
* Wed Sep 09 2020 Nicolas Patricio Saenz Julienne - Update to baec4d28b (2020-09-03) (bsc#1176202)
* firmware: Update to latest master
* Tue Aug 04 2020 Nicolas Patricio Saenz Julienne - Update to bd816dbac (2020-07-31)
* firmware: Switch to master branch for Pi4 firmware
* firmware: il: isp: Ensure HR output is active and ISP is open before starting a frame
* firmware: isp_ctrl: Fail in start_[raw|yuv]_frame if ISP is not idle See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=275489
* Tue Jul 21 2020 Nicolas Patricio Saenz Julienne - Add vl805-firmware-loader overlay so as for upstream u-boot to be able to acess USB.
* Fri Jul 03 2020 Nicolas Patricio Saenz Julienne - Add armstub=armstub8-rpi4.bin entry conditionally for rpi4, if not present in boot partition the boot will continue as is.
* Fri Jun 05 2020 Fabian Vogt - Move config tweaks to this package (boo#1172387)
* Wed Apr 08 2020 Nicolas Patricio Saenz Julienne - Add cma-default option to vc4-kms-v3d overlay to mimic the previous default behaviour, which used the kernel\'s default size. For now we still set the CMA trough the kernel command line, that will change in the future. (bsc#1167761)
* Mon Apr 06 2020 Nicolas Patricio Saenz Julienne - Get rid of rpi4-thermal overlay, not needed anymore- Get rid of rpi4-firmware-dma-ranges overlay, not needed anymore- Get rid of rpi4-gpio-names overlay, not needed anymore
* Wed Apr 01 2020 Guillaume GARDET - Drop Supplements for extra and extra-pi4
* Tue Mar 31 2020 Petr Tesařík - Use proper quoting for the modalias Supplements (see also https://github.com/openSUSE/libzypp/issues/216).
* Fri Mar 27 2020 Petr Tesařík - Add a modalias Supplements, so the package gets selected automatically on a Raspberry Pi.
* Thu Mar 26 2020 Nicolas Patricio Saenz Julienne - Remove rpi4-cma overlay, not needed anymore (bsc#1167761)
* Fri Mar 20 2020 Nicolas Patricio Saenz Julienne - Add rpi4-firmware-dma-ranges overaly which fixes touch input on the official 7\" display (bsc#1167147)
* Wed Mar 11 2020 Nicolas Patricio Saenz Julienne - Add uboot-bcm2835-pl011 overlay, which fixes the serial port compatible name as expected by u-boot, relevant for RPi, RPi2 and RPi0 families (bsc#1166414)
* Fri Feb 28 2020 Nicolas Patricio Saenz Julienne - Add rpi4-gpio-names overlay so as to have a consistent way to access GPIOs (bsc#1164722)
* Thu Feb 27 2020 Nicolas Patricio Saenz Julienne - Remove rpi4-pcie-ib-size-fix as raspberrypi-firwamre-dt removed it (bsc#1165143)
* Fri Feb 21 2020 Nicolas Patricio Saenz Julienne - Update to f4b5869 (2020-02-12) (bsc#1163476):
* firmware: board_info: Fix GPIO expander reset trait
* firmware: gencmd: Fix measure_clock name for CLOCK_OUTPUT_108
* firmware: platform: Compromise on gpu overclock settings- After the rpi-5.5.y update in raspberrypi-firmware-dt:
* Remove rpi4-genet as it\'s not needed anymore
* Remove gpu_mem entry for rpi4
* Wed Jan 22 2020 Guillaume GARDET - Update to be2713bed4 (2020-01-16):
* firmware: master: arm_ldconfig: Support multiple initramfs files See: #1318
* firmware: power: Make pmicrd/pmicwr available to all
* firmware: arm_ldconfig: Support multiple initramfs files See: #1318
* firmware: Add support for backlight enable
* firmware: Revert mmal: Support 64 bit clients See: raspberrypi/userland#586
* firmware: arm_dt/dtoverlay fixes for ARM side camera driver power control
* firmware: Fixup for vcgencmd display_power See: #1224
* firmware: Add hdmi_wifi_pixel_freq_adj config option
* Mon Jan 20 2020 Nicolas Patricio Saenz Julienne - Add rpi4-thermal device tree overlay for RPi4 (bsc#1160311)
* Thu Jan 09 2020 Matthias Brugger - Disable overscan by default (bsc#1160473)