Changelog for rtl_433-21.12-23.5.x86_64.rpm :

* Thu Dec 16 2021 Martin Hauke - Update to version 21.12 Highlights
* Added noise stats, autolevel, and squelch
* Added automatic file format detection from filename
* Added support for SmartFire Proflame 2 remote control
* Added support for Lacrosse TX34 rain gauge
* Added support for Telldus-FT0385R
* Added support for GE Choice Alert wireless alarm sensors
* Added support for Porsche Boxter/Cayman TPMS
* Added support for Funkbus/Instafunk
* Added support for Truck TPMS
* Added support for LaCrosse LTV-W1 wind sensor
* Added support for Auriol 4-LD5661 temperature/rain sensor
* Added support for Linear Megacode Remote
* Added support for EnOcean ERP1 decoder
* Added support for Acurite-01185M
* Added support for ATech-WS308 temperature sensor
* Added support for RainPoint sensor
* Added support for Inkbird ITH-20R
* Added support for Clipsal CMR112 cent-a-meter power meter
* Added support for Govee Water Leak Detector H5054 and Govee Contact Sensor B5023
* Added support for Markisol curtain remote
* Added support for Oregon Scientific BTHR918
* Added UV index add decimals to Bresser-7in1
* Changed InfluxDB output of \'mic\' from field to tag
* Added biastee, digital_agc, direct_samp, offset_tune option for rtlsdr and rtl_tcp
* Added QoS to MQTT options Changed
* Changed PCM slicer to measure bit length in more cases
* Added CS8 as file input format
* Added decoder priority stages
* Fixed fprintf to use an unsigned marker when an unsigned value is given
* Added RTL_433_REDUCE_STACK_USE to reduce size of bitbuffers
* Fixed rainpoint msg buffer must be initialized
* Fixed Reduce stack use in slicers
* Changed HASS script to logging
* Added SwitchDocLabs SM23 note
* Added SwitchDocLabs F016TH note
* Added SwitchDocLabs FT020T note
* Fixed Inovalley-kw9015b rain bits
* Added battery_ok to Bresser-7in1
* Added HASS long term statistics
* Added bitbuffer row spill
* Updated Govee Leak Sensor with new parity check
* Fixed Springfield-Soil/AlectoV1 false positives
* Fixed LaCrosse-TH3 checksum
* Added cmake found lib versions output
* Mon May 10 2021 Martin Hauke - Update to version 21.05 Highlights - Last release to support Autotools (autoconf, automake) builds - Last release to offer \"oldmodel\" keys (deprected since 2020) - Added GPSd tags option - Added optional TLS support to MQTT - Added OpenSSL support for influxs TLS - Added support for ELK-319DWM, Alula RE101 to Interlogix - Added conf for Tesla charge port opener - Added support for Hyundai-VDO TPMS - Added support for TX25U dual channel temp sensor - Added support for Honeywell CM921/BDR91/Evohome - Added support for Auriol AFT 77 B2 - Added support for Auriol AHFL - Added support for Bresser Professional Rain Gauge - Added support for TFA Marbella pool thermometer - Added support for Amazon Basics Meat Thermometer - Added support for Owl 180i support - Added support for Jansite TPMS Model Solar - Added support for Cavius alarms - Added support for Security plus v1 - Added conf for Skylink HA-434TL motion sensor - Added support for Burnhard BBQ thermometer - Added support for wmbus water meter Maddalena - Added conf for ATC Technology LMT-430 - Added support for Blueline PowerCost Monitor - Added conf for FAN-53T - Added support for Acurite 515 fridge/freezer sensors - Added support for TelFix-RadioLoop (#1571) - Added conf for Salus RT300RF thermostat, Heatmiser PRT-W thermostat Changes - Added pressure_kPa key for HA (#1712) - Added support for ELK-319DWM, Alula RE101 to Interlogix (closes #1711) - Fixed and style Honeywell CM921 - Added option to set force_update for all sensors (#1695) - Added Tesla charge port opener decoder conf (#1704) - Added battery flags to Bresser 7in1 (closes #1703) - Fixed Hyundai-VDO TPMS - Added Hyundai-VDO TPMS (#1643) - Added X10 Dim, Bright, All Lights ON, and All Off commands (#1687) - Added support for TX25U dual channel temp sensor - Fixed code warnings - Fixed code style - Added forgotten id - Added Honeywell CM921/BDR91/Evohome decoder (#1336) - Added Auriol AFT 77 B2 protocol decoder - Fixed Holman-WS5029 rain count (#1686) - Fixed explanation of supposed PM10 (estimated) value (#1678) - Added support for Auriol AHFL protocol (#1683) - Fixed PSI calculation for Ford TPMS - Added support for higher pressure range in Ford TPMS - Fixed secplus_v1 endless loop (closes #1662) - Fixed secplus_v1 overflow - Added support for some Ecowitt WH41 sensor signals - Added comment regarding PM10 readings in the FineOffset WH0290 decoder - Added support for Bresser Professional Rain Gauge (#1676) - Added TFA Marbella pool thermometer protocol decoder (#1675) - Added Amazon Basics Meat Thermometer decoder (#1671) - Fixed exit if http server can\'t start - Added Owl 180i support - Added website and sensor specifications for Jansite TPMS Model Solar (#1666) - Added decoder for jansite solar tpms (#1663) - Added Ford TPMS pressure and temperature (closes #1654) - Fixed http redirect to index for Chrome - Added support for Cavius alarms (#1648) - Added mqtt token slash accepts any character - Added variable fm low pass filter option - Added support for Security plus v1 (#1483) - Added GPSd tags option (#1636) - Added FineOffset WH0290 extra fields (#1639) - Fixed Hideki Gust speed by Udo Kirsten - Added option for multiple data tags - Added optional TLS support to MQTT (closes #1633) - Added OpenSSL support for influxs TLS (closes #1569) - Added LaCrosse TX141TH-Bv2 checksum - Changed rain field format for WS2032 - Added m_bus decoded values + HCA (#1630) - Changed battery_ok, rain field for WS2032 - Fixed m_bus Show invalid dates as invalid (#1628) - Fixed mqtt retain on hass script (#1602) - Added Skylink HA-434TL motion sensor conf (s.a. #814) - Added support for Burnhard BBQ thermometer (#1624) - Added TFA 30.3208.02 note (closes #1622) - Added raw pulse printing mode - Added support for parsing timedate in wbus (#1616) - Added Battery Level for Fineoffset WH0290 Wireless Air Quality Monitor (#1617) - Fixed Blueline tweaks and improvements (#1590) - Added support for wmbus water meter Maddalena (#1610) - Changed soil moisture to percent display (#1595) - Added ATC Technology LMT-430 conf (#1600) - Fixed buffer length in honeywell (#1598) - Fixed buffer size error (#1596) - Fixed FineOffset WH1050 field widths (#1592) - Added support for Blueline PowerCost Monitor - Added FAN-53T decoder conf (#1588) - Added support for Acurite 515 fridge/freezer sensors (#1579) - Fixed invalid HASS \"weather\" device_class (#1548) - Fixed rtlsdr_read_async() abort on read stall (closes #1581) - Fixed rtlsdr_set_freq_correction non-error code - Added support for UV index and light intensity readings in Cotech (#1575) - Fixed false positive bug in Nexus (closes #1576) - Added support for TelFix-RadioLoop to Somfy (closes #1571) - Added Thermostat example conf files with mqtt outputs (#1573) - Added lacrosse decoder sanity checks
* Sat Nov 14 2020 Martin Hauke - Update to version 20.11 Highlights
* HTTP server, JSON-RPC
* Added RfRaw analyzer output and format input support
* Added support for LaCrosse Technology View LTV-R1 Rainfall Gauge
* Added support for ECODHOME smart socket
* Added support for LaCrosse Technology View TH2 Thermo/Hygro sensor
* Added support for Bresser 6-in-1, 7-in-1 weather station
* Added support for LaCrosse Technology View TH3 Thermo/Hygro Sensor
* Added support for LaCrosse LTV-WR1 Multi Sensor
* Added support for Nice Flor-s remote
* Added support for Schrader TPMS SMD3MA4 (Subaru)
* Added support for MightyMule Driveway Alarm FM231
* Added support for Somfy RTS
* Added support for LaCrosse LTV-WSDTH01
* Added support for TFA 30.3221.02 Temperature/Humidity sensor
* Added support for Security plus v2 keyfob
* Added support for Acurite Atlas and Atlas Lightning Detector
* Added support for Acurite 590TX
* Added support for ThermoPro TX2
* Added support for IDM and NetIDM decoders
* Added support for Insteon decoder
* Added support for LaCrosse TX141B
* Added support for Sharp SPC775
* Added support for Missil ML0757
* Added support for Fineoffset WH32
* Added support for Abarth124 TPMS sensor
* Added support for Fine Offset WH1080 FSK version
* Added support for SCM+ decoder
* Added support for Kerui WD51 Water leak sensor
* Added support for Cotech 36-7959
* Added support for Eurochron EFTH-800
* Added support for Visonic Powercode devices
* Added support for Klimalogg decoder and needed nrzs demodulator Changed
* Added support for LaCrosse Technology View R1 Rainfall Gauge (#1553)
* Added http server (#871)
* Added jsmn json lib
* Added support for ECODHOME smart socket (#1544)
* Fixed Lacrosse-THx hardcoded strings to support data extractor scripts
* Added support for LaCrosse Technology View TH2 Thermo/Hygro sensor (#1552)
* Added stats start time reporting
* Fixed Analyzer FSK/OOK hint (#1557)
* Improved unit tests for bitbuffer with extra assertions
* Fixed UNUSED in term_ctl
* Removed \"http\" as \"influx\" alias
* Added arguments and docs to Home Assistant MQTT auto discovery script (#1546)
* Changed LaCrosse LTV-WR1 to wind_avg_km_h key (#1549)
* Fixed rfraw builder overflow (#1539)
* Added Dooya Curtain Remote conf (#1545)
* Added SDR loop api
* Changed to sig_atomic_t for sighandler
* Fixed wmbus csv output parameters
* Fixed flags field for TPMS Jansite (#1538)
* Added note for TFA Dostmann 30.3159.IT (#1537)
* Added SDR runtime settings api
* Changed exit async naming
* Added SDR device info
* Added support for Bresser 6-in-1, 7-in-1 weather station (#1225)
* Added support for LaCrosse Technology View TH3 Thermo/Hygro Sensor (#1536)
* Added support for LaCrosse LTV-WR1 Multi Sensor (#1533)
* Added support for Nice Flor-s remote (#1526)
* Changed remove DSC subtype key (#1522)
* Changed Acurite subtype key to message_type (#1520)
* Added support for WH31E RCC packet type (#1528)
* Fixed wmbus mode S buffer length issue for Lansen meters
* Added SoapySDR to MinGW-w64 build
* Added output format option to flex getters (#1532)
* Added TFA 30.3209 note to Nexus (#1516)
* Added TFA-Dostmann 30.3161 rain scale (#1531)
* Fixed Insteon string overflow
* Fixed missing CSV fields, add a debug check
* Added named output tag option (#1517)
* Added support for Schrader TPMS SMD3MA4 (Subaru) (#1511)
* Removed unneeded update_protocol
* Changed width calc from r_device to slicers (#1513)
* Added support for mightymule driveway alarm FM231 (#1407) (#1515)
* Changed rfraw parse to accept multiple codes
* Fixed include for memcmp in rfraw (#1507)
* Added id key to scmplus (#1503)
* Removed list of supported device protocols from man page (#1345)
* Added RfRaw analyzer output support
* Added RfRaw format input support
* Removed FSK_PULSE_MANCHESTER_ZEROBIT from ook_demods
* Fixed Inovalley kw9015b temp/rain fields proper
* Fixed Inovalley kw9015b temp/rain fields (#1501)
* Added support for Somfy RTS (#1496)
* Added 7-bit clean strings check to actions
* Added maintainer_update check
* Fixed Security+ 2.0 decoder for new gap_limit rows (#1498)
* Added clang-analyzer action
* Added build action
* Added style check action
* Improved PCM NRZ 0-bit slicing precision
* Fixed output keys for FineOffset WH51 (#1495)
* Fixed index bug in TFA 30.3221
* Fixed simplisafe non-printable character output
* Added support for LaCrosse LTV-WSDTH01 (#1485)
* Added gap_limit to PCM demod
* Fixed invalid dumpers on ook input (#1463)
* Added support for TFA 30.3221.02 Temperature/Humidity sensor (#1426)
* Fixed Acurite 6045 temperature 2.0F too low (#1482 #1401)
* Added support for Security plus v2 keyfob (#1480)
* Fixed opus_xt300 added sanity check to data values (#1470)
* Fixed runtime error \'left shift of 229 by 24 places cannot be represented in type int (#1479)
* Fixed bad conf for Fan-11t (#1477)
* Added came top432 flex decoder config (#1474)
* Fixed wmbus raw telegram output, mainly for wmbusmeters use
* Fixed efergy_e2_classic False Trigger (#1475)
* FIXed check manchester_decode check decoded bit length in a constent method, removed superfluous comment
* FIXed check manchester_decode result length
* Fixed current_cost 8 bytes required
* Fixed TPMS Abarth124 false positive (#1466)
* Fixed alectov1 csv fields (#1457)
* Added Atlas Lightning Detector support (#1418)
* Added Acurite Atlas support (#1124)
* Added Nexus-TE82s compatibility note (#1455)
* Updated idm scmplus Meter type list (#1445)
* Added Acurite 590TX support (#1411)
* Added ThermoPro TX2 support (#1450)
* Improved program exit code in case of error (#1451)
* Improved Home Assistant MQTT auto discovery (#1390)
* Fixed Many False Positives (#1444)
* Fixed Globaltronics QUIGG GT-TMBBQ-05 false positives (#1443)
* Fixed Oregon Scientific SL109H false positives (#1442)
* Added IDM and NetIDM decoders (#1421)
* Changed Fineoffset WH32 to exclude pressure
* Added Insteon decoder (#1285)
* Added Friedland EVO door bell conf
* Added support for LaCrosse TX141B (#1434)
* Added missing parts for Sharp SPC775 decoder
* Added Sharp SPC775 support (#1433)
* Added support for Missil ML0757
* Fixed use of return code in Abarth Spider decoder
* Added conditional to data_make (#1432)
* Added support for Fineoffset WH32 (#1431)
* Added bit reversed output for HCS200 decoder to match official tools
* Added reverse32 function
* Improved x10sec add sensors, tamper, crc (#1413)
* Improved inFactory e.g. MIC (#1325)
* Changed Kerui to break out additional fields from state (#1018)
* Updated rtl_433.example.conf
* Improved validations checks for smoke_gs558 protocol
* Added Equation/Siemens ADLM FPRF remote conf
* Added Abarth124 tpms sensor support
* Added missing protocol to readme
* Added attenuation histogram output (#1387)
* Added Fine Offset WH1080 FSK version support
* Improved FSK demodulation of distorted signals better
* Added SCM+ decoder (#1410)
* Added support for Kerui WD51 Water leak sensor (#1406)
* Fixed cancel watchdog when reading from file input
* Fixed ERT Endpoint Type extraction (#1379)
* Added custom data processor example
* Improved Honeywell sensor support (#1384)
* Added delay and low battery codes for DS10A door sensor (#1397)
* Fixed free results from SoapySDR API
* Fixed handle empty filenames
* Added support for Cotech 36-7959 (#1382)
* Removed deprecated positional flex syntax
* Changed div 10 to mul 0.1 in all decoders
* Changed value scaling for double to float in all decoders
* Changed checks on Rubicson/Nexus/Solight
* Fixed Bresser 5in1 Wind calculation (#1353)
* Improved MQTT Home Assistant example (#1357)
* Added decode_uart util (#1376)
* Fixed Eurochron EFTH-800 missing mic
* Added Eurochron EFTH-800 support (#1375)
* Fixed MQTTT mgr free
* Fixed Soapy string leaks
* Added Prometheus/OpenMetrics relay example (#1371)
* Fixed missing levels with minmax demod (fixes #1363)
* Fixed socket portability
* Fixed visonic device battery reporting
* Improved visonic_powercode
* Fixed rtl_tcp gain/rate/freq status output
* Fixed missing WSAStartup in rtl_tcp
* Added support for Visonic Powercode devices (#1349)
* Added message length check for ESIC EMT7110.
* Updated Acurite 6045 to capture all 8 bits of strike counter (#1348)
* Added configuration file for SMC5326 (#1346)
* Updated template guideline for verbosity (#1344)
* Fixed failing style-check test by adding allocation check to write-sigrok
* Fixed flex map parse
* Changed -l n to -Y level=n
* Changed detector level limits to dB
* Fixed Fineoffset-WHx080 temperature (#1327)
* Fixed Ecowitt-WH53, Maverick-ET73 timings
* Fixed Klimalogg device settings, tolerance was set to low
* Added Klimalogg decoder and needed nrzs demodulator
* Fixed negative temperatures in wmbus decoder
* Added pulse-eval example
* Tue Feb 18 2020 Martin Hauke - Update to version 20.02+git.20200218: Highlights
* Added InfluxDB output
* Added native Sigrok writer
* Changed to newmodel keys default
* Fixed SoapySDR for 0.8 API
* Added new minmax FSK pulse detector
* Changed default to use new minmax detector and sample rate of 1MS/s for frequency above 800MHz
* Changed -a and -G option to discourage usage
* Improvements and support for many more sensors- Build with support for SoapySDR
* Tue Sep 10 2019 Jan Engelhardt - Update descriptions.
* Fri Aug 30 2019 Martin Pluskal - Use new macro for cmake building
* Thu Aug 29 2019 Martin Hauke - Update to version 19.08+git.20190829: Highlights:
* Added MQTT output (#1016)
* Added stats reporting (#733)
* Added SoapySDR general keyword settings option, e.g. antenna
* Added new model keys option
* Changed Normalize odd general keys on devices (#1010)
* Changed Use battery_ok instead of battery for newmodel
* Added report model description option (#987)
* Added pulse data text file support (#967)
* Added color to console help output
* Fixed CF32 loader; addeded CS8, CF32 dumper Changes:
* Added CurrentCost EnviR support (#1115)
* Added ESIC-EMT7170 power meter (#1132)
* Added LaCrosse-TX141Bv3 support (#1134)
* Added channel to inFactory-TH (#1133)
* Added man page rtl_433.1 (#1121)
* Added color to console help output
* Added support for Philips AJ7010 (#1047)
* Added frequency hopping signal support for win32 (#1128)
* Added Holman WS5029 decoder
* Added Acurite Rain 899 support
* Added support for Oregon scientific THGR328N and RTGR328N (#1107) (#1109)
* Added frequency hop on USR1 signal
* Added \'-E hop\' option
* Added option for multiple hop times
* Added sensor similar to GT-WT-02 (#1080)
* Added Rubicson 48659 Cooking Thermometer
* Added TFA Dostmann 30.3196 decoder (#983)
* Added support for HCS200 KeeLoq encoder (#1081)
* Added channel output to lacrosse_TX141TH_Bv2 (#1097)
* Added IKEA Sparsnäs decoder.
* Added support for Eurochron weather station sensor (#1090)
* Added MQTT topic format strings (#1079)
* Added two EV1527 based sample configurations (#1087)
* Added DirecTV RC66RX Remote Control
* Added support for Ecowitt temperature sensor
* Added Companion WTR001 decoder (#1055)
* Changed Thermopro TP12 also supports TP20 (#1061)
* Added configuration for PIR-EF4 sensor (#1049)
* Added Alecto WS-1200 v1/v2/DCF decoders to Fineoffset (#975)
* Added TS-FT002 decoder (#1015)
* Added Fine Offset WH32B support (#1040)
* Added LaCrosse-WS3600 support, change LaCrosse-WS to LaCrosse-WS2310
* Added LaCrosse WS7000 support (#1029) (#1030)
* Changed Omit humidity on Prologue if invalid
* Added MQTT output (#1016)
* Added stats reporting (#733)
* Added Interface Specification for data output (#827)
* Added checksum to Ambient Weather TX-8300
* Added Interlogix glassbreak subtype
* Added Jansite TPMS support (#1020)
* Added Oregon Scientific RTHN129 support (#941)
* Changed Use battery_ok instead of battery for newmodel
* Changed Update battery_low, temperatureN keys
* Changed Normalize odd general keys on devices (#1010)
* Fixed Efergy-e2 current reading exponent
* Added FS20 remote decoder (#999)
* Added SoapySDR general keyword settings option
* Added option to select antenna on SoapySDR devices (#968)
* Fixed CF32 loader; added CS8, CF32 dumper
* Added ASAN to Debug builds
* Changed tfa_twin_plus_30.3049: Add mic to output
* Added new model keys option
* Enhanced Kedsum, S3318, Esperanza with MIC (#985)
* Added support for XT300/XH300 soil moisture sensor (#946)
* Changed Schrader unit from bar to kPa
* Added report model description option (#987)
* Added native scale for SDRplay
* Added Chungear BCF-0019x2 example conf
* Changed GT-WT-02 to support newer timings; changed model name
* Added pulse data text file support (#967)
* Added Digitech XC0346 support to Fine Offset WH1050 (#922)
* Added bitbuffer NRZI(NRZS/NRZM) decodes
* Added Rosenborg/WH5 quirk to Fineoffset
* Added support for Silverline doorbells (#942)
* Changed TPMS Toyota to match shorter preamble
* Changed TPMS Citroen data readings
* Changed TPMS Renault data readings
* Added Digitech XC-0324 temperature sensor decoder (#849)
* Added sample rate switching
* Added Mongoose- Remove patch:
* rtl_433-disable-test.diff
* Sat Aug 18 2018 mardnhAATTgmx.de- Update to version 18.05+git.20180806:
* Clean up copyright notes
* Change flex to more robust opt arg parse
* Fix bitbuffer_parse to be sane about empty row specs
* Tweak timings for Kerui
* Fill id string for Bresser device.
* Add battery event for Kerui
* Update style for chuango
* Update style for akhan
* Update style and add cmds to Kerui
* Update code style for wssensor
* Add Hyundai WS SENZOR (#779)
* Add fix for TEK377E, issue #776
* Fix Makefile devices to match CMakeLists
* Add CS16 input and output (#773)
* Add device: M-Bus (EN 13757-4) - Data Link layer (#768)
* Fix for Autotools
* Rewrite debug_mode to load_mode and dump_mode
* Fix typo
* Fix indents
* Clean up baseband, optimize FM, add baseband-test (#770)
* Rewrite ambient_weather for robustness and style
* Remove some unwanted BITBUF_COLS uses
* Change radiohead to unify the applications
* Fix Sensible Living merge
* Sensible Living protocol added. (#742)
* Fix SOCKET(_TYPE) for syslog
* Win32 syslog client patches (#762)
* Make printout aligned (#761)
* Make the frequency setting clearer. (#760)
* Add real protocol number to startup output (#744)
* Convert intertechno to data_make (#726)
* see #755
* FineOffset WH0530: Add battery low detection, correct rain factor (#765)
* Add prototype for \'nice_freq()\' (#759)
* Add a \"pretty-printer\" of a frequency (#758)
* No \"Variable Length Arrays\" for MSVC (#755)
* Remove (#756)
* More MSVC fixes (#754)
* [MSVC] patch include/data.h (#753)
* Include (#752)
* Add support for Oregon Scientific UVR128 UV sensor (#738)
* Update code style for RadioHead
* DSC Sensors break out status bits
* acurite_986: fix temperature type to enable conversion feature to work
* Fri Jun 01 2018 mardnhAATTgmx.de- Update to version 18.05+git.20180525:
* New devices: Euroster 3000TX, Elro DB270 (#683)
* Add flex spec for Byron BY doorbells (#686)
* change array separator in csv to \";\" otherwise RadioHead ASK output will break csv parsers (#687)
* create flex dev adhoc and enable csv output (#688)
* calc stop_time late; better exit messages (#689)
* add proper reset and gap limit to Quhwa; use repeated rows; add csv output; style update (#691)
* fix short char buffer
* Adding interlogix devices driver (#649)
* fix bitbuffer_extract_bytes clipping unaligned bits
* fix Interlogix; style
* Added decoder for Dish Network UHF Remote 6.3 (#700)
* use actual max protocols
* Update acurite.c (#704)
* Acurite 06045M structured data (data_make) cleanup, decoding improvements. (#707)
* Adjust alarm from 1 second to 3 second
* Acurite 986 convert to JSON/data_make
* Add hack from my branch to work around missing bit
* Fix typos/misspellings
* Add conversion hPA/inHG, kPa/PSI (#711)
* Fix acurite raw_str termination
* Touch up waveman code style, add missing time field
* Add PiWM decoding (#724)
* SimpliSafe Sensor (#721)
* SimpliSafe style updates
* Add Pacific PMV-C210 TMPS support (#717)
* Add preamble option to flex decoder
* Make intertechno decoder work with ITT-1500 (#694)
* Convert DSC to structured data (#725)
* Regularize and extend Acurite 6045M comments (#728)
* DSC data_make additions. (#730)
* Indents
* Acurite TXR/6045 fixes
* Acurite cosmetics fixes
* Mon Feb 26 2018 mardnhAATTgmx.de- Create subpackge for header files
* Thu Feb 15 2018 mardnhAATTgmx.de- Update to version 0.0.1+git.20180213:
* fix flex options, add gap_limit for PWM
* README.md: Add another Debian dependency (#680)
* README.md: Fix typo (#679)
* README.md: Add build tools to Debian command (#678)
* revert localtime_r to localtime for win32
* disable syslog output on win32
* remove left over xc0348 device
* Fix on_connect signature and topic subscriptions in MQTT examples. (#674)
* refactor hostport_param
* refactor abuf
* allow ipv6 for syslog
* add flex device to Makefile
* refactor print_array_value
* use prettier C99 bool macro
* shuffle functions
* change aux pattern to composition
* remove output_hander_t, printer_ctx indirection
* change indent; consistent style
* adds a remote syslog output
* update readme usage info
* default enable x10_sec, timing doc, style
* Adds x10_sec device for decoding X10 Security RF signals (#671)
* Spelling fix: gague -> gauge (#672)
* fix new_template
* use localtime_r instead of localtime
* reduce false positves with Bresser on LaCrosse TX141TH
* add MIC to bresser
* freshen up template with more examples
* add a flexible general purpose decoder (#647)
* remove PWM_TERNARY, use PWM_PRECISE for sync bits
* change pulse_detect to use pwm_precise for sync bits
* rename CLOCK_BITS to DMC
* change fordremore to proper DMC, the output is vastly different
* change DMC (clock_bits) demod to add rows on symbol errors
* convert Acurite 592TXR from TERNARY to PRECISE
* reduce false positives in Thermopro TP12
* code style for LaCrosse TX141
* convert LaCrosse TX141 from TERNARY to PRECISE
* convert Bresser 3CH from RAW to PRECISE
* convert LaCrosse TX from RAW to PRECISE
* convert Philips Sensor from TERNARY to PRECISE
* convert Calibeur from TERNARY to PRECISE
* convert Acurite 00275rm from TERNARY to PRECISE
* enhance pwm_precise to cover raw and ternary cases
* add sync pulse count to bitbuffer
* fix Lacrosse TX141TH sync rows
* Added device LaCrosse TX141 support to lacrosse_TX141TH_Bv2.c (#670)
* add back C99 with ADD_DEFINITIONS
* C99 compatibility (#667)
* add git version info to usage output if available
* let cmake set C99; CMP0025
* additional build deps (#668)
* wh1080: Fix warning about uninitialized use (#666)
* adding asepc, getkwargs helper
* fold PWM_precise_parameters into r_device
* output pulse_demod_pwm_precise at end of pulses as well
* adapt precise param sync width to us
* use _XOPEN_SOURCE on string.h for strdup
* fix -R 0 fault
* use bitbuffer_clear for bitbuffer_parse
* refactor bitbuffer_parse
* minor
* Doxygen EXTRACT_ALL to show all docs, there isn\'t any notable exported API yet
* update 1.7 Doxyfile to 1.8
* add Doxygen building to CMake
* cleanup
* parse number suffixes on e.g. frequency, samplerate, duration, hoptime
* relax false positive logic prologue/alecto to allow a single leading pulse
* Fix unit conversions for Acurite 5n1 (#651)
* fix `-d n` parsing
* Add missing brand to OSv1 (#650)
* adding FindGperftools cmake module
* add Profile build type using GPerfTools
* use CMake defaults for optimizations (-O3)
* RTGN129 author name (#646)
* change grab file name to gNNN_FFFM_RRRk.cu8 (#642)
* replace -i with -d : (#648)
* Clean up WIN32 include/ifdef (#643)
* fix read-mode buffer size and allocation, s. #641 (#644)
* reduce Alecto/Auriol-v2 false positives in Prologue
* enable pedantic warnings; also on Clang
* pedantic fix: -Wextra-semi
* pedantic fix: replace arithmetic on void
* (gnu extension) with sane char
* arithmetic; fix function pointer for qsort, bsearch
* adding mic to OS SL109h
* remove false positives with wg-pb12v1, please report samples if WH2, WH5, Telldus are missing messages
* remove debug from wg-pb12v2; add mic to fineoffset
* fix GE Color Effects Remote indent and MAX_PROTOCOLS
* chmod 644 on source files
* add model switch to WH2/WH5/Telldus in fineoffset
* Add support for Telldus variants of fineoffset (#639)
* merge formatting from PR #615
* disable mebus: lacks docs, tests and has false positives
* Esperanza, Kedsum, S3318p: relax reset timing, check sync pulses to remove dups
* fix OOK_PULSE_CLOCK_BITS pulse_tolerance to µs
* fix: require 24 bits data for rain gauge sensors
* Update chuango.c
* Stop after outputting successful event(s)
* Added support to Oregon Scientific RTGN129
* Add device NEXA LMST-606 magnetic sensor
* added unit (Fahrenheit) to output of Ambient Weather Temperature Sensor
* Update rtl_433.h
* fixed compile time warnings (formatting related)
* change PWM_Precise_Parameters pulse_tolerance to use us instead of samples
* fixing schraeder data types
* Remove unintended spurious white spaces
* Add another schrader TPMS support (corrections)
* Add another schrader TPMS support
* remove spurious if-statement
* Specify device to use via serial number
* automatically use first available dongle
* define _GNU_SOURCE for strdup
* Add support for the Thermopro TP-12. This is based heavily on the code for the Thermopro TP-11, and the modulation is compatible, but the bit layout is fairly different and there are more sensors, so I\'ve made this a separate device.
* Addressed code review by AATTzuckschwerdt
* Device handler for GE Color Effects remote control Fixes #569