Changelog for python3-pytest-xdist-3.0.2-lp154.2.5.noarch.rpm :

* Wed Nov 30 2022 Daniel Garcia - Remove python_module macro definition- Use autosetup instead of setup + autopatch- Remove reintroduce-slave-terminology.patch- Remove 0001-Revert-Remove-compat-for-pytest-6.patch- Update to 3.0.2: [#] Bug Fixes
* #813: Cancel shutdown when a crashed worker is restarted. [#] Deprecations
* #825: The --rsyncdir command line argument and rsyncdirs config variable are deprecated.
* The rsync feature will be removed in pytest-xdist 4.0.
* #826: The --looponfail command line argument and looponfailroots config variable are deprecated.
* The loop-on-fail feature will be removed in pytest-xdist 4.0. [#] Improved Documentation
* #791: Document the pytest_xdist_auto_num_workers hook.
* #796: Added known limitations section to documentation.
* #829: Document the -n logical option. [#] Features
* #792: The environment variable PYTEST_XDIST_AUTO_NUM_WORKERS can now be used to specify the default for -n auto and -n logical.
* #812: Partially restore old initial batch distribution algorithm in LoadScheduling.
* pytest orders tests for optimal sequential execution - i. e. avoiding unnecessary setup and teardown of fixtures. So executing tests in consecutive chunks is important for optimal performance.
* In v1.14, initial test distribution in LoadScheduling was changed to round-robin, optimized for the corner case, when the number of tests is less than 2
* number of nodes. At the same time, it became worse for all other cases.
* For example: if some tests use some \"heavy\" fixture, and these tests fit into the initial batch, with round-robin distribution the fixture will be created min(n_tests, n_workers) times, no matter how many other tests there are.
* With the old algorithm (before v1.14), if there are enough tests not using the fixture, the fixture was created only once.
* So restore the old behavior for typical cases where the number of tests is much greater than the number of workers (or, strictly speaking, when there are at least 2 tests for every node). [#] Removals
* #468: The --boxed command-line option has been removed. If you still need this functionality, install pytest-forked separately. [#] Trivial Changes
* #468: The py dependency has been dropped.
* #822: Replace internal usage of py.log with a custom solution (but with the same interface).
* #823: Remove usage of py._pydir as an rsync candidate.
* #824: Replace internal usages of py.path.local by pathlib.Path.
* Sat Jan 15 2022 Matthias Fehring - Update to 2.5.0
* Features + Full compatibility with pytest 7 - no deprecation warnings or use of legacy features. + New --dist=loadgroup option, which ensures all tests marked with AATTpytest.mark.xdist_group run in the same session/worker. Other tests run distributed as in --dist=load.
* Trivial Changes + Use AATTpytest.hookspec decorator to declare hook options in newhooks.py to avoid warnings in pytest 7.0. + Use up-to-date setup.cfg/pyproject.toml packaging setup. + Started using type annotations and mypy checking internally. The types are incomplete and not published.- Changes from 2.4.0
* Features + On Linux, the process title now changes to indicate the current worker state (running/idle). Depends on the setproctitle package, which can be installed with pip install pytest-xdist[setproctitle]. + Add support for Python 3.10.- Changes from 2.3.0
* Deprecations and Removals + Python 3.5 is no longer supported.
* Features + Add --numprocesses=logical flag, which automatically uses the number of logical CPUs available, instead of physical CPUs with auto. This is very useful for test suites which are not CPU-bound. + Added new pytest_handlecrashitem hook to allow handling and rescheduling crashed items.
* Bug Fixes + Copy the parent process sys.path into local workers, to work around execnet\'s python -c adding the current directory to sys.path. + Fix issue caused by changing the branch name of the pytest repository.
* Trivial Changes + Replace master with controller where ever possible. + Use \'main\' to refer to pytest default branch in tox env names.- Update patches
* reintroduce-slave-terminology.patch
* 0001-Revert-Remove-compat-for-pytest-6.patch- Require setuptools_scm >= 6.0 for building
* Tue Feb 02 2021 Dirk Müller - update to 2.2.0:
* Internal errors in workers are now propagated to the master node.
* Tue Oct 13 2020 Marketa Calabkova - Skip test failing with the new pytest
* Mon Aug 31 2020 Marketa Calabkova - Update to 2.1.0
* New ``pytest_xdist_auto_num_workers`` hook can be implemented by plugins or ``conftest.py`` files to control the number of workers when ``--numprocesses=auto`` is given in the command-line.
* ``psutil`` has proven to make ``pytest-xdist`` installation in certain platforms and containers problematic, so to use it for automatic number of CPUs detection users need to install the ``psutil`` extra- Add patches to keep compatibility with older pytests:
* reintroduce-slave-terminology.patch
* 0001-Revert-Remove-compat-for-pytest-6.patch
* Tue Aug 25 2020 Marketa Calabkova - Update to 2.0.0
* Drop backward-compatibility \"slave\" aliases related to worker nodes. We deliberately moved away from this terminology years ago, and it seems like the right time to finish the deprecation and removal process.
* ``pytest-xdist`` no longer supports Python 2.7.
* New functions ``xdist.is_xdist_worker``, ``xdist.is_xdist_master``, ``xdist.get_xdist_worker_id``, to easily identify the current node.
* When using ``-n auto``, count the number of physical CPU cores instead of logical ones.
* ``pytest-xdist`` now requires ``pytest>=6.0``.
* Wed May 13 2020 Tomáš Chvátal - Do not do symlinks
* Sun May 03 2020 Tomáš Chvátal - 1.32.0:
* #524: Add testrun_uid fixture. This is a shared value that uniquely identifies a test run among all workers. This also adds a PYTEST_XDIST_TESTRUNUID environment variable that is accessible within a test as well as a command line option --testrunuid to manually set the value from outside.
* Mon Jan 06 2020 Tomáš Chvátal - Update to 1.31.0:
* #486: Add support for Python 3.8.
* #491: Fix regression that caused custom plugin command-line arguments to be discarded when using --tx mode.
* Mon Oct 07 2019 Tomáš Chvátal - Update to 1.30.0:
* Fix crash issues related to running xdist with the terminal plugin disabled
* Initialization between workers and master nodes is now more consistent
* Tue Jul 02 2019 Tomáš Chvátal - Update to 1.29.0:
* #226: --max-worker-restart now assumes a more reasonable value (4 times the number of nodes) when not given explicitly. This prevents test suites from running forever when the suite crashes during collection.
* #435: When the test session is interrupted due to running out of workers, the reason is shown in the test summary for easier viewing.
* #442: Compatibility fix for upcoming pytest 5.0: session.exitstatus is now an IntEnum object.
* #435: No longer show an internal error when we run out of workers due to crashes.
* Mon Jun 03 2019 Tomáš Chvátal - Update to 1.28.0:
* #426: pytest-xdist now uses the new pytest_report_to_serializable and pytest_report_from_serializable hooks from pytest 4.4
* Thu Mar 21 2019 Tomáš Chvátal - Update to 1.27.0:
* #374: The new ``pytest_xdist_getremotemodule`` hook allows overriding the module run on remote nodes.
* #415: Improve behavior of ``--numprocesses=auto`` to work well with ``--pdb`` option.
* Tue Feb 12 2019 Tomáš Chvátal - Update to 1.26.1:
* #406: Do not implement deprecated pytest_logwarning hook in pytest versions where it is deprecated.
* #376: The current directory is no longer added sys.path for local workers, only for remote connections.
* #379: Warning attributes are checked to make sure they can be dumped prior to serializing the warning for submission to the master node.
* #372: Pytest versions older than 3.6 are no longer supported.
* #373: Node setup information is hidden when pytest is run in quiet mode to reduce noise on many-core machines.
* #388: mainargv is made available in workerinput from the host\'s sys.argv.
* #384: pytest 4.1 support: ExceptionInfo API changes.
* #390: pytest 4.1 support: pytest_logwarning hook removed.
* Fri Oct 26 2018 Ondřej Súkup - update to version 1.23.2- add python-six to runtime deps
* Fix issue where Warnings could cause pytest to fail if they do not set the args attribute correctly.
* Fix warnings transfer between workers and master node with pytest >= 3.8
* Improve collection performance by reducing the number of events sent to master node
* Sat Apr 07 2018 arunAATTgmx.de- update to version 1.22.2:
* Add backward compatibility for slaveoutput attribute to WorkerController instances. (#285)
* Sat Feb 24 2018 mimi.vxAATTgmail.com- cleanup Requires and spec
* Sat Feb 24 2018 arunAATTgmx.de- update to version 1.22.1:
* Bug Fixes + Fix issue when using loadscope or loadfile where tests would fail to start if the first scope had only one test. (#257)
* Trivial Changes + Change terminology used by pytest-xdist to master and worker in arguments and messages (for example --max-worker-reset). (#234)
* Thu Jan 11 2018 arunAATTgmx.de- update to version 1.22.0:
* Add support for the pytest_runtest_logfinish hook which will be released in pytest 3.4. (#266)
* Wed Jan 03 2018 arunAATTgmx.de- update to version 1.21.0:
* Deprecations and Removals + Drop support for EOL Python 2.6. (#259)
* Features + New --dist=loadfile option which load-distributes test to workers grouped by the file the tests live in. (#242)
* Bug Fixes + Fix accidental mutation of test report during serialization causing longrepr string-ification to break. (#241)
* Wed Nov 15 2017 mimi.vxAATTgmail.com- new pytest-xdist requires pytest-forked package
* Sat Nov 11 2017 arunAATTgmx.de- specfile:
* CHANGELOG->CHANGELOG.rst
* update pytest version requirement to 3.0.0- update to version 1.20.1:
* Bug Fixes + Fix hang when all worker nodes crash and restart limit is reached (#45) + Fix issue where the -n option would still run distributed tests when pytest was run with the --collect-only option (#5)- changes from version 1.20.0:
* Features + xdist now supports tests to log results multiple times, improving integration with plugins which require it like pytest-rerunfailures and flaky. (#206)
* Bug Fixes + Fix issue where tests were being incorrectly identified if a worker crashed during the teardown stage of the test. (#124)- changes from version 1.19.1:
* Bug Fixes + Fix crash when transferring internal pytest warnings from workers to the master node. (#214)- changes from version 1.19.0:
* Deprecations and Removals + --boxed functionality has been moved to a separate plugin, pytest-forked. This release now depends on \" pytest-forked\" and provides --boxed as a backward compatibility option. (#1)
* Features + New --dist=loadscope option: sends group of related tests to the same worker. Tests are grouped by module for test functions and by class for test methods. See README.rst for more information. (#191) + Warnings are now properly transferred from workers to the master node. (#92)
* Bug Fixes + Fix serialization of native tracebacks (--tb=native). (#196)- changes from version 1.18.2:
* Bug Fixes + Removal of unnecessary dependency on incorrect version of py. (#105) + Fix bug in internal event-loop error handler in the master node. This bug would shadow the original errors making extremely hard/impossible for users to diagnose the problem properly. (#175)- changes from version 1.18.1 :
* Bug Fixes + Fixed serialization of longrepr.sections during error reporting from workers. (#171) + Fix ReprLocal not being unserialized breaking --showlocals usages. (#176)- changes from version 1.18.0 :
* pytest-xdist now requires pytest>=3.0.0.
* Features + Add long option --numprocesses as alternative for -n. (#168)
* Bug Fixes + Fix serialization and deserialization dropping longrepr details. (#133)- changes from version 1.17.1 :
* Bug Fixes + Hot fix release reverting the change introduced by #124, unfortunately it broke a number of test suites so we are reversing this change while we investigate the problem. (#157)
* Improved Documentation + Introduced towncrier for CHANGELOG management. (#154) + Added HOWTORELEASE documentation. (#155)- changes from version 1.17.0:
* fix #124: xdist would mark test as complete after \'call\' step. As a result, xdist could identify the wrong test as failing when test crashes at teardown. To address this issue, xdist now marks test as complete at teardown.- changes from version 1.16.0:
* pytest-xdist now requires pytest 2.7 or later.
* Add worker_id attribute in the TestReport
* new hook: pytest_xdist_make_scheduler(config, log), can return custom tests items distribution logic implementation. You can take a look at built-in LoadScheduling and EachScheduling implementations. Note that required scheduler class public API may change in next pytest-xdist versions.
* Sat Apr 22 2017 aloisioAATTgmx.com- Converted to single-spec- Fix source URL
* Wed Jan 18 2017 hpjAATTurpla.net- fix Source URL
* Sun Jan 15 2017 hpjAATTurpla.net- Update to 1.15.0 - new ``worker_id`` fixture, returns the id of the worker in a test or fixture. Thanks Jared Hellman for the PR. - display progress during collection only when in a terminal, similar to pytest #1397 issue. Thanks Bruno Oliveira for the PR. - fix internal error message when ``--maxfail`` is used (#62, #65). Thanks Collin RM Stocks and Bryan A. Jones for reports and Bruno Oliveira for the PR.- exclude two tests, that fail due to too narrow requirements
* Fri May 27 2016 toddrme2178AATTgmail.com- Update to 1.14 - new hook: ``pytest_xdist_node_collection_finished(node, ids)``, called when a worker has finished collection. Thanks Omer Katz for the request and Bruno Oliveira for the PR. - fix README display on pypi - fix #22: xdist now works if the internal tmpdir plugin is disabled. Thanks Bruno Oliveira for the PR. - fix #32: xdist now works if looponfail or boxed are disabled. Thanks Bruno Oliveira for the PR.
* Wed Oct 21 2015 hpjAATTurpla.net- Update to 1.13.1: - fix a regression -n 0 now disables xdist again- Update to 1.13: - extended the tox matrix with the supported py.test versions - split up the plugin into 3 plugin\'s to prepare the departure of boxed and looponfail. looponfail will be a part of core and forked boxed will be replaced with a more reliable primitive based on xdist - conforming with new pytest-2.8 behavior of returning non-zero when all tests were skipped or deselected. - new \"--max-slave-restart\" option that can be used to control maximum number of times pytest-xdist can restart slaves due to crashes. Thanks to Anatoly Bubenkov for the report and Bruno Oliveira for the PR. - release as wheel - \"-n\" option now can be set to \"auto\" for automatic detection of number of cpus in the host system. Thanks Suloev Dmitry for the PR.- Update to 1.12: - fix issue594: properly report errors when the test collection is random. Thanks Bruno Oliveira. - some internal test suite adaptation (to become forward compatible with the upcoming pytest-2.8)- Update to 1.11: - fix pytest/xdist issue485 (also depends on py-1.4.22): attach stdout/stderr on --boxed processes that die. - fix pytest/xdist issue503: make sure that a node has usually two items to execute to avoid scoped fixtures to be torn down pre-maturely (fixture teardown/setup is \"nextitem\" sensitive). Thanks to Andreas Pelme for bug analysis and failing test. - restart crashed nodes by internally refactoring setup handling of nodes. Also includes better code documentation. Many thanks to Floris Bruynooghe for the complete PR.