Changelog for multipath-tools-devel-0.9.1+52+suse.be8809e-2.1.x86_64.rpm :

* Fri Sep 09 2022 Martin Wilck - Update to version 0.9.1+52+suse.be8809e:
* Code-identical to 0.9.1+48+suse.9c6c435 (merge in git repo to preserve history; fix revision in _service file).
* Wed Sep 07 2022 Martin Wilck - Update to version 0.9.1+48+suse.9c6c435:
* Upstream version update
* kpartx_id: remove bashism
* Doc: add multipathc.8 manual page
* Sat Sep 03 2022 Martin Wilck - Update to version 0.9.0+134+suse.dbf2e2d:
* Add multipathc command under GPL3.0, and split off libmpathutil (bsc#1202616)
* Fix command completion in interactive mode (bsc#1201483)
* multipathd: fix use-after-free in handle_path_wwid_change() (bsc#1201483)
* Improve startup time for very large multipath.conf (bsc#1200523)
* Avoid checker blocking event handling for huge number of devices (boo#1203085)
* Cleanup sysfs accessors in libmultipath
* Minor upstream bug fixes
* Spelling fixes
* Documentation: add ALUA info to README.md, delete README.alua
* Wed Aug 24 2022 mwilckAATTsuse.com- Update to version 0.9.0+55+suse.33d8854:
* Avoid linking to libreadline to avoid licensing issue (bsc#1202616)
* Wed Jul 13 2022 Martin Wilck - Update to version 0.9.0+39+suse.51a2ab1: Upstream bug fixes:
* libmultipath: fix find_multipaths_timeout for unknown hardware (boo#1201483)
* multipath-tools: fix \"multipath -ll\" for Native NVME Multipath devices (boo#1201483)
* Wed Jul 13 2022 Martin Wilck - Update to version 0.9.0+33+suse.fdc6686
* multipath.conf: add support for \"protocol\" subsection in \"overrides\" section to set certain config options by protocol.
* Removed the previously deprecated options getuid_callout, config_dir, multipath_dir, pg_timeout
* hwable fixes and additions
* multipath.conf(5): add disclaimer about vendor support
* libmultipath, kpartx: fix callers of dm_get_next_target()
* Change built-in defaults for NVMe: group by prio, and immediate failback
* Allow compilation with -D_FORTIFY_SOURCE=3
* Wed May 11 2022 Martin Wilck - Update to version 0.8.9+90+suse.71a70fb:
* support overriding -D_FORTIFY_SOURCE in OPTFLAGS
* add -U_FORTIFY_SOURCE to optflags to avoid compilation errors on old distros
* Tue May 10 2022 Martin Wilck - Update to version 0.8.9+87+suse.a1eb122:
* add ability to autodetect support for -D_FORTIFY_SOURCE=3
* Mon May 09 2022 Martin Wilck - Update to version 0.8.9+85+suse.a9da21c:
* This is a pre-release of multipath-tools 0.9.0
* multipath.conf: add \"protocol\" subsection in \"overrides\" section This allows to set \"dev_loss_tmo\", \"fast_io_fail_tmo\", and \"eh_deadline\" on a per-protocol basis rather than per storage
* multipath.conf: drop support for deprecated options: getuid_callout, pg_timeout, config_dir, multipath_dir
* multipathd: don\'t switch to DAEMON_IDLE during startup (bsc#1199346, bsc#1197570)
* multipathd: avoid delays during uevent processing (bsc#1199347)
* Fixes for minor issues reported by coverity
* Fix for memory leak with uid_attrs
* Fix possibility to redefine -D_FORTIFY_SOURCE macro.
* Updates for built in hardware db
* Thu Apr 14 2022 Martin Wilck - Update to version 0.8.9+42+suse.45974f11:
* Logging improvements
* Fix busy loop with delayed_reconfigure (bsc#1199342)
* multipathd: use remove_map_callback for delayed reconfigure
* multipathd: Don\'t keep starting TUR threads, if they always hang. (bsc#1199345)
* Fix handling of path addition in read-only arrays on NVMe
* Updates of built-in hardware database- Update to upstream 0.8.9
* libmultipath: only warn once about unsupported dev_loss_tmo
* Otherwise code-identical to 0.8.8+64
* Mon Mar 28 2022 Martin Wilck - If multipath-tools is newly installed, load dm-multipath (bsc#1196898)
* Wed Feb 16 2022 Martin Wilck - Update to version 0.8.8+64+suse.f265f7e0:
* libmultipath: fix printing native nvme multipath topology (bsc#1196011)
* libmultipath: add %L path wildcard for 64-bit hex LUN
* libmultipath: support host adapter name lookup for s390x ccw bus
* Tue Feb 15 2022 Martin Wilck - Update to version 0.8.8+60+suse.4c5922cb:
* multipathd: add suppport for FC Fabric Performance Impact Notifications (FPIN) (bsc#1195506)
* Wed Feb 09 2022 Martin Wilck - Version 0.8.8+57+suse.dfb672fe
* kpartx.rules: skip MD devices (bsc#1195644)
* libmultipath: hwtable: use ALUA for all LIO targets (bsc#1195649)
* multipathd.service: drop ExecStartPre for loading dm-multipath (bsc#1195397)
* Wed Feb 02 2022 Martin Wilck - Version 0.8.8+45+suse.628d603e
* fix handling of historical-service-time path selector (bsc#1195425)
* fix marking multipath devices as failed prematurely on startup (bsc#1195426)
* multipathd.service: remove LimitCORE=infinity directive This should only be enabled for debugging.
* multipathd.service: don\'t load scsi_dh modules (bsc#1195397) This is done via modules-load.d functionality on (open)SUSE- Upstream fixes:
* Fix claiming of paths with \"find_multipaths strict\"
* Avoid unnecessary read-only reloads
* Fri Jan 07 2022 Martin Wilck - Version 0.8.8+13+suse.79c3556f
* code-wise identical to 0.8.8+38+suse.2bdd3a14 (previous version number was too high by mistake)
* Mon Dec 06 2021 mwilckAATTsuse.com- Update to 0.8.8+38+suse.2bdd3a14.obscpio
* upstream version bump. Code-wise identical to 0.8.7+138+suse.7c9afe31
* Fri Dec 03 2021 Martin Wilck - Drop versioned dependency on libmpath0 again (bsc#1190622)
* Since 0.8.6, libmultipath and libmpathpersist have got proper ABI versioning, and rpmbuild auto-generates dependencies on libmultipath.so.0(LIBMULTIPATH_13.0.0) etc.
* Thu Dec 02 2021 Martin Wilck - Update to version 0.8.7+138+suse.7c9afe31: New upstream version (pre-0.8.8)
* deprecate \"config_dir\" and \"multipath_dir\" config options (will be removed in future version)
* remove dependency on systemd-udevd-settle.service (boo#1193336)
* fix crash in remove_map (boo#1193334)
* CLI: add path wildcard \"%I\" for init state
* CLI: add \"reconfigure all\" command
* allow multiple pending \"reconfigure\" commands (bsc#1189551)
* speed up \"reconfigure\" by avoiding unnecessary map reloads (bsc#1189551)
* rework of CLI command handler (unix socket handler) to avoid hanging CLI commands (bsc#1189551)
* fix multipathd startup after stop during reconfigure (boo#1193338)
* improve error detection and warning messages in config file parser
* fix exit status of multipath -T (bsc#1191900)
* fix defects reported by coverity (boo#1193342) - avoid sleeping with locks held - exit if bindings file is broken - set umask before mkstemp - add bounds and consistency checks in SCSI VPD parsing code
* add hardware table entry for DellEMC/ME4 (PowerVault ME4)
* Tue Sep 21 2021 Martin Wilck - Add a versioned dependency of multipath-tools on libmpath0 (bsc#1190622)
* Fri Sep 10 2021 Martin Wilck - Update to version 0.8.7+14+suse.5a09bfa1:
* Fix possible string overflows (bsc#1188148)- Upstream fixes / changes
* better string handling
* multipath: print warning if multipathd isn\'t running
* mpathpersist: better error msg when no usable paths exist
* fixes from 0.8.6+32+suse.f11c192 merged upstream
* Fri Aug 13 2021 Martin Wilck - Spec file: remove compatibility code for SLE <= SLE15-SP2
* Thu Aug 12 2021 mwilckAATTsuse.com- Update to version 0.8.6+32+suse.f11c192:
* libmultipath:fix compilation with glibc 2.34 (bsc#1189099)
* libmultipath: avoid buffer size warning with systemd 240+ (bsc#1189176)
* libmultipath: use uint64_t for sg_id.lun (bsc#1187534)- Upstream bug fixes:
* multipath-tools: make HUAWEI/XSG1 config work with alua and multibus
* multipath-tools: add info about HPE Alletra 6000 and 9000
* multipathd: cli_getprkey(): fix return value and \"aptpl\" support
* multipathd: don\'t rescan_path on wwid change in uev_update_path
* kpartx: Don\'t leak memory when getblock returns NULL
* multipath: free vectors in configure
* multipathd: fix ev_remove_path return code handling
* multipathd: remove duplicate orphan_paths in flush_map
* multipathd: don\'t fail to remove path once the map is removed
* multipathd: fix compilation issue with liburcu < 0.8
* Tue Jun 08 2021 Ludwig Nussel - install to /usr on Tumbleweed (boo#1029961)
* Tue May 18 2021 Martin Wilck - Update to version 0.8.6+10+suse.47711374:
* Github workflows: add CI for SUSE-specific branches
* Fri Apr 02 2021 Martin Wilck - Disabled LTO for multipath-tools
* The test for is_valid_path fails if LTO is enabled, just disabling it for %check is insufficient.
* Thu Apr 01 2021 mwilckAATTsuse.com- Update to version 0.8.6+9+suse.6c05a61: Update to upstream 0.8.6.
* add eh_deadline option to avoid endless SCSI error handling
* add wwid_recheck option to detect storage configuration changes
* add library versioning for libmultipath, libmpathpersist etc. and to libmultipath plugins
* move some global symbols to libmultipath (udev, logsink, etc) and provide default implementations for get_multipath_config() etc. This allows simplifiying libmpathpersist_example.c drastically.
* fixes for shutdown issues and various race conditions on exit
* improve cleanup on exit, fix memory leaks
* add libmpathvalid library
* fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081)
* Avoid access to root FS while queueing IO (bsc#1178049, bsc#1181234)
* lots of bug fixes, additions to built-in hardware table, and CI improvements (bsc#1186212)
* kpartx: free loop device after listing partitions (boo#1107187) Bug fixes on top of 0.8.5 mentioned below are also included in this upstream version.
* Thu Apr 01 2021 mwilckAATTsuse.com- Update to version 0.8.5+30+suse.633836e:
* multipathd: give up \"add missing path\" after multiple failures (bsc#1183963)
* Thu Mar 18 2021 mwilckAATTsuse.com- Update to version 0.8.5+29+suse.5dabcd2:
* 11-dm-mpath.rules: run \"multipath -U\" with -v1 (bsc#1182871)
* libmultipath: merge update_multipath_table() and update_multipath_status() (bsc#1183666)
* Fri Mar 12 2021 mwilckAATTsuse.com- Update to version 0.8.5+26+suse.2cbedfd: Avoid \"illegal request\" errors on non-RDAC storage (bsc#1182072, bsc#1177371)
* Wed Mar 10 2021 mwilckAATTsuse.com- Update to version 0.8.5+23+suse.c11b054:
* multipath -U: reduce log level of \"adding new path\" message (bsc#1181435, bsc#1183666)
* Wed Feb 10 2021 mwilckAATTsuse.com- Update to version 0.8.5+22+suse.e1e3c48:
* multipath-tools tests: fix stringop-overflow build errors with gcc 11 (bsc#1181877)
* README moved to README.md (has been converted to markdown upstream)
* Wed Dec 16 2020 mwilckAATTsuse.com- Update to version 0.8.5+12+suse.3b0e9ca
* libmultipath: force map reload if udev incomplete (bsc#1178662, bsc#1172157, bsc#1175454, bsc#1176406)- Fixes from upstream 0.8.5
* multipath-tools: add MacroSAN arrays to hwtable
* libmultipath: Allow discovery of USB devices (add configuration option \"allow_usb_devices\")
* Fri Dec 04 2020 Martin Wilck - Remove compatibility code for SLE <= 12-SP2 from spec file
* Thu Sep 17 2020 Martin Wilck - Bugref for all minor fixes since SLE15-SP2 release (bsc#1176670)- Added README.alua
* Wed Sep 16 2020 mwilckAATTsuse.com- Update to version 0.8.4+192+suse.1bc10ad:
* Fix handling of hardware properties for maps without paths (bsc#1176644)
* Wed Sep 16 2020 mwilckAATTsuse.com- Update to version 0.8.4+190+suse.fe234ea:
* Fixes for daemon shutdown issues from SLE(bsc#1110060, bsc#1110439) - multipathd: allow shutdown during configure()
* fix compilation of external programs with -lmultipath (bsc#1133957, necessary after the above fix)
* Minor upstream fixes
* Thu Sep 10 2020 Martin Wilck - Missing past changelog bug references:
* 0.7.3+10+suse.70ccb55b0439: Patch series for NVMe discovery and failover (bsc#1038865, bsc#1057820)
* 0.7.9+109+suse.203c1cf
* setup_map: wait for pending path checkers to finish (bsc#1118224)
* Thu Aug 27 2020 mwilckAATTsuse.com- Update to version 0.8.4+183+suse.1817ce2: Added reviewed upstream fix for multipath crash
* multipath: get_dm_mpvec: discard broken maps
* Wed Aug 26 2020 mwilckAATTsuse.com- Update to version 0.8.4+180+suse.50a2698:
* Fix memory access / leak issues found with valgrind
* Fri Aug 21 2020 mwilckAATTsuse.com- Update to version 0.8.4+170+suse.801341f:
* libmultipath: tests: fix bitfield tests
* Spec file: disable LTO for %check (bsc#1133122)
* Thu Aug 20 2020 mwilckAATTsuse.com- Update to version 0.8.4+167+suse.70bef90: Pull in reviewed upstream changes- Bug fixes
* libmultipath: add consistency check for alias settings (bsc#1172429)
* libmultipath: select_action(): don\'t drop map if alias clashes (bsc#1172429)
* libmultipath: refuse reloading an existing map with different WWID (bsc#1172429)
* libmultipath: select_action(): force udev reload for uninitialized maps (bsc#1172157)
* multipathd: uev_trigger(): handle incomplete ADD events (bsc#1172157)
* improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064)
* libmultipath: add device to hwtable.c (bsc#1174026) (ETERNUS AHB)- New features
* multipath: add -D option to skip multipathd delegation
* multipath: delegate flushing maps to multipathd
* multipathd: add \"del maps\" multipathd command- Other changes
* cleanup disassemble_map() code path (bsc#1178377, bsc#1178379)
* multipath-tools: introduce INIT_REMOVED state
* logging improvements
* fix \"multipathd show devices\"
* libmultipath: remove uevent listener failback
* libmultipath: create bitfield abstraction
* libmultipath: count pending paths as active on loads
* kpartx: handle alternate bsd disklabel location- Lots of minor fixes and cleanups- Spec file: use %service_del_postun_without_restart macro
* Wed Jun 10 2020 mwilckAATTsuse.com- Update to version 0.8.4+43+suse.908383f:
* enable negated regular expression syntax in conf file (bsc#1182917)
* change default devnode blacklist to \'!^(sd[a-z]|dasd[a-z]|nvme[0-9])\'
* Mon Jun 08 2020 mwilckAATTsuse.com- Update to version 0.8.4+40+suse.b06c2e5a:- Fix udev rule processing during coldplug (bsc#1172157)
* 11-dm-mpath.rules: Fix udev rule processing during coldplug- Fix compilation with gcc-10
* fix boolean value with json-c 0.14
* libmultipath: fix condlog NULL argument in uevent_get_env_var- Reviewed upstream changes:
* simplify failed_wwid code
* centralize path validation code- Use pkgconfig for BuildRequires
* Tue May 12 2020 mwilckAATTsuse.com- Update to version 0.8.4+31+suse.8f53764:
* Fix sporadic build failures caused by missing build dependencies
* Mon May 11 2020 mwilckAATTsuse.com- Update to version 0.8.4+29+suse.c27ed8d:
* multipath-tools: Makefile.inc: set -Wno-error=clobbered
* Makefile.inc: keep warning flags during rpm build
* Eliminate compiler warnings on 32bit build.
* Fixes for tests under i586- Spec file: add %check section to run multipath-tools CI
* not on SLE12, as cmocka is missing
* add build dependency on cmocka for building tests
* run \"make test\" with parallel make
* Mon May 11 2020 mwilckAATTsuse.com- Update to version 0.8.4+19+suse.48fc2f4:
* multipath: add \"-e\" option to enable foreign libraries
* libmultipath: set \"enable_foreign\" to NONE by default
* deleted libmultipath-set-enable_foreign-to-NONE-by-default.patch (included in factory git repo now).
* Makefile: dependency fixes for parallel build- Get rid of %is_opensuse:
* drop build workaround for Leap 42.1
* build libdmmp for everything except SLE12/Leap42 and older- Other spec file updates:
* use %make_build to speed up build (possible with 0.8.4)- Migrated to .obscpio format.
* Fri May 08 2020 mwilckAATTsuse.com- Update to version 0.8.4+16+suse.f319f7ea- Changed github workflow back from merge-based to rebase-based. This makes it much easier to assess differences between upstream and SUSE code.
* Use TAG_OFFSET in _service, as this is now possible again.- Reviewed upstream patches added:
* kpartx.rules: fix handling of synthetic uevents (bsc#1161923)
* libmpathpersist: limit PRIN allocation length to 8192 bytes (bsc#1165786)- Update upstream version to 0.8.4
* drop nr_active field, always count active paths (bsc#1125043)
* kpartx: fix detection of dasd partition tables on loop devices (bsc#1139775)
* directio path checker fixes
* lots of fixes for compiler warnings, and cleanups
* nvme: update to nvme-cli 1.9
* Wed Feb 12 2020 mwilckAATTsuse.com- Update to version 0.8.3+11+suse.7dcdf2f:
* libmultipath: fix files read from config_dir (bsc#1162896)
* Thu Jan 16 2020 mwilckAATTsuse.com- Update to version 0.8.3+10+suse.86684b9:
* libmultipath: fix compilation with -fno-common (boo#1160403)
* Fri Oct 04 2019 mwilckAATTsuse.com- Update to version 0.8.3+9+suse.f6f2a52- Minor upstream improvements and bug fixes
* libmultipath: EMC PowerMax NVMe device config
* Wed Sep 04 2019 mwilckAATTsuse.com- Update to version 0.8.2+27+suse.3ff280b:
* Added upstream patch to fix premature path reinstantiation with san_path_err_XX (boo#1149319)
* Thu Aug 29 2019 mwilckAATTsuse.com- Update to version 0.8.2+26+suse.d884195:- Don\'t activate NVMe native multipath support by default
* multipath.conf.5: document foreign library support
* multipath.conf: add \"enable_foreign\" parameter (bsc#1139837)
* Set default for \"enable_foreign\" to \"NONE\" (bsc#1139837) added libmultipath-set-enable_foreign-to-NONE-by-default.patch- Added reviewed upstream patches (marginal path patch set from Red Hat)
* add \"marginal_pathgroups\" config option
* deprecate \"delay_wait_checks\" and \"delay_watch_checks\"; they are now automatically mapped to eqivalent \"san_path_err_...\" settings.
* Tue Jul 16 2019 mwilckAATTsuse.com- Update to version 0.8.2+11+suse.0f6a649:
* kpartx: recognize DASD on loop devices again (bsc#1139775)
* Bump version to 0.8.2 - most changes were already in SUSE tree
* Man page improvements (bsc#1148767)
* Tue Jul 02 2019 mwilckAATTsuse.com- Update to version 0.8.1+59+suse.f947184:
* libmultipath: trigger uevents for partitions, too (bsc#1140146)
* Tue Jun 25 2019 mwilckAATTsuse.com- Update to version 0.8.1+58+suse.2af8f92:
* libmultipath: more cautious blacklisting by missing property (don\'t blacklist paths because of temporarily missing udev properties)
* libmultipath: fix memory leak with \"uid_attrs\" config option
* libmultipath: get_uid: straighten the fallback logic- Fix SCSI VPD 0x80/0x83 parsing- Fix compiler warnings introduced by gcc 9:
* -Wstringop-overflow, -Wstringop-truncation, - Waddress-of-packed-member
* Tue Jun 25 2019 mwilckAATTsuse.com- Update to version 0.8.1+28+suse.fea562a:
* mpathpersist: optimize for setups with many LUNs (bsc#1134648)
* mpathpersist: add option -f/--batch-file (bsc#1134648)
* libmultipath: get_prio(): really don\'t reset prio for inaccessible paths (bsc#1118495)- Upstream bug fixes from dm-devel (bsc#1139369):
* multipath: call store_pathinfo with DI_BLACKLIST
* multipathd: fix REALLOC_REPLY with max length reply
* libmultipath: make vector_foreach_slot_backwards work as expected
* multipathd: fix client response for socket activation (bsc#1133861)
* various minor fixes (coverity)
* Tue Apr 30 2019 mwilckAATTsuse.com- Disable kmod() style dependencies again (bsc#1119414)
* For TW, dependencies will be autogenerated (gh#openSUSE/rpm-config-SUSE#3)
* For SLE, feature is currently rejected (jsc#SLE-3853)- Update to version 0.8.1+8+suse.8c11498:
* Avoid deadlock situation during udev settle (bsc#1131789, bsc#1125145) - multipath -u: test socket connection in non-blocking mode
* Fix priority handling for offline paths (bsc#1118495)- Update to upstream 0.8.1 (bsc#1148767)
* Avoid device IO in \"multipath -u\" (bsc#1125145)
* multipathd: protect all access to running_state (bsc##1110060, bsc#1110439)
* Improve handling of changed WWIDs and temporary failure to obtain WWID. Option \"disable_changed_wwids\" is now ignored. (bsc#1184260)
* Fixes for PATH_PENDING state handling (bsc#1125043)
* libmultipath: hwtable: add Lenovo DE series (bsc#1125507)
* Sat Apr 13 2019 Jan Engelhardt - Trim %if..%endif guards that do not affect the build result.- Combine %service_
* calls to reduce generated code.- Make use of %make_install.
* Tue Mar 19 2019 Martin Wilck - Re-enable kmod-style dependencies for multipath-tools package (bsc#1119414)- Separate out libmpath0 (bsc#1119414)- Spec file improvements
* Add Conflicts: for older multipath-tools to libmpath0
* Move license files to the libmpath0 package, which contains the code with complex licensing. The executables are GPL-2.0 anyway.
* Remove bogus dependency of -devel package on device-mapper
* -devel package depends on libmpath0, not multipath-tools
* Remove %dir %{_defaultlicensedir} for SLE12-SP3 and newer (John Vandenberg )
* Remove unused /var/cache/multipath directory
* Remove check for multipath maps in %pre and %post
* Remove SLE11-specific multipathd service stop / start from %pre / %post
* Remove obsolete tools from package description (bsc#1129827)
* Add -n to %service_del_{pre,post}un for multipathd.socket
* Fri Mar 15 2019 Martin Wilck - Update to version 0.8.0+17+suse.a28893f:
* Code-identical to 0.7.9+139+suse.ed9d450, except for new version number- Disable kmod() style dependencies for now, as they are causing problems with image builds (bsc#1119414). They\'d been active for SLE15-SP1 only, anyway.- _service: determine \"tag offset\" manually, the patch count determined by git is far too high.
* Thu Mar 07 2019 Martin Wilck - Fix module name in multipath.conf (bsc#1119414)
* The modules-load.d entry must match the filename exactly
* Thu Mar 07 2019 mwilckAATTsuse.com- Update to version 0.7.9+139+suse.ed9d450:
* multipath-tools: Build: properly parse systemd\'s version
* Tue Mar 05 2019 Martin Wilck - Add kmod(xyz) style dependencies for SLE15-SP1 (jsc#SLE-3853, fate#326579, bsc#1119414)
* Tue Mar 05 2019 mwilckAATTsuse.com- Update to version 0.7.9+138+suse.0edd0a2:- Include reviewed fixes from upstream
* libmutipath: continue to use old state on PATH_PENDING
* libmultipath: disable user_friendly_names for NetApp
* multipath: blacklist zram devices
* various fixes for martinal path code- Bug fixes:
* multipathd: Fix miscounting active paths (bsc#1125043)
* multipathd: avoid null pointer dereference in LOG_MSG (bsc#1127873)
* minor fixes suggested by coverity (bsc#1127879)
* Fri Jan 11 2019 Martin Wilck - Add BuildRequires on suse-module-tools
* we need it for regenerate_initrd_posttrans
* Wed Jan 09 2019 mwilckAATTsuse.com- Update to version 0.7.9+111+suse.b4232b7:- merged upstream cb4a979a (SUSE bug fixes merged upstream, code-identical to previous release).
* Tue Jan 08 2019 mwilckAATTsuse.com- Update to version 0.7.9+109+suse.203c1cf:
* multipathd: avoid crash in cli_list_path (bsc#1121134)
* libmultipath: fix compilation with older kernel headers (bsc#1121066)- merged upstream fb824725
* Improved NVMe support in both native and dm-mpath mode added basic NVMe ANA support (bsc#1119898, bsc#1118495)
* Fix prio output in \"multipathd show topology\" (bsc#1119897)
* multipathd: fix daemon not really shutdown (bsc##1110060, bsc#1110439)
* Fri Dec 14 2018 mwilckAATTsuse.com- Update to version 0.7.9+90+suse.f81e290:
* libmultipath: Increase SERIAL_SIZE to 128 bytes (bsc#1107179)
* Wed Dec 12 2018 mwilckAATTsuse.com- Update to version 0.7.9+89+suse.df77b66:- re-enable \"san_path_err_xy\" options These have been removed upstream, but they were supported in SLE-15/Leap15.0, so we can\'t simply throw them away. Improve documentation, mark them as deprecated, but keep the code in place.
* Wed Dec 12 2018 mwilckAATTsuse.com- Update to version 0.7.9+85+suse.766b95e:
* upstream patch series to make verbosity level 3 less verbose and thus better usable (bsc#1118937)
* fix for handling device size mismatch in coalesce_paths() (bsc#1037379)
* libmultipath: fix false removes in dmevents polling code (bsc#1116272)
* Spec file: remove build dependency on dracut which causes build errors for some distributions
* Mon Nov 26 2018 mwilckAATTsuse.com- Update to version 0.7.9+58+suse.0790830:
* libmpathpersist: fix off-by-one error in PRIN length check (bsc#1099007)
* multipathd: fix mpp->hwe handling when paths are freed (fix possible crash caused by new hardware table code)
* Wed Nov 14 2018 mwilckAATTsuse.com- Update to version 0.7.9+55+suse.9fc8439: (note the \"55\" is due to former merge operations. We actually only have 7 patches on top of upstream. All other patches referenced below as \"not upstream\" have been merged).
* Bump version to 0.7.9
* multipathd: reset delay_wait_checks counter on failure (bsc#1114771)
* multipathd: fix irritating \"minor number mismatch\" message (bsc#1111116)
* fix possible failure to shut down (bsc#1110060, bsc#1110439)
* upstream \"checker overhaul\" - cleanups and improvements for path checkers
* Upstream fixes for failures handling path initializiation
* various small upstream bug fixes.
* Wed Oct 03 2018 mwilckAATTsuse.com- Update to version 0.7.7+136+suse.19bb285: Bug fixes from upstream, and SUSE bug fixes
* multipathd: try SCSI persistent reservations for SCSI only (bsc#1108875)
* libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458)
* libmultipath: Fixup updating paths (bsc#1110418)
* multipathd: fix memory leak on error in configure (bsc#1110418)
* multipathd: minor fixes (bsc#1110418)
* multipathd: function return value tweaks (bsc#1110418)
* multipath: fix max array size in print_cmd_valid (bsc#1110418)
* libmutipath: don\'t use malformed uevents (bsc#1110418)
* libmultipath: fix null dereference int alloc_path_group (bsc#1110418)
* libmultipath: fix memory issue in path_latency prio (bsc#1110418)
* libmultipath: fix length issues in get_vpd_sgio (bsc#1110418)
* multipathd: decrease log level of uevent messages (bsc#1110586)
* multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587)
* libmultipath: pathinfo: skip hidden devices (bsc#1110586)
* libmultipath: nvme: shorter topology output (bsc#1082419)
* libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112)
* libmultipath: fix gcc 8.1 \"truncated output\" warnings (bsc#1099007)
* (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
* libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
* multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
* libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
* libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007)
* libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007)
* libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007)- Update to upstream 1a8625abd (0.7.7+82)
* minor fixes for kpartx, found by coverity
* mpathpersist: add --param-alltgpt option
* libmultipath: add \"protocol\" blacklist option.
* multipathd: add new wildcard \"%P\" for \"protocol\"
* multipath-tools: fix products names in hwtable
* libmultipath: more debug output in alua prioritizer (bsc#1080965)
* libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION (bsc#1080965)
* libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965)
* Mon Jul 02 2018 mwilckAATTsuse.com- Update to version 0.7.7+75+suse.6287aef: Added minor updates from upstream
* multipath-tools: add info about how to enable ALUA in ONTAP
* multipath-tools: add directio path_checker for DASD devices
* multipath-tools: make Product Name mandatory and add all of them Minor rebase, as some SUSE patches have been merged upstream (all mentioned in previous changelogs)
* Fri Jun 29 2018 mwilckAATTsuse.com- Update to version 0.7.7+72+suse.4b24466:
* multipath: fix return code handling in delegate_to_multipathd (bsc#1098177)
* multipath: don\'t start multipathd unnecessarily (bsc#1098177)
* Mon Jun 25 2018 mwilckAATTsuse.com- Update to version 0.7.7+70+suse.4a5941e:
* libmultipath: change partition_delimiter default to \"-part\" (bsc#1073622, bsc#1056526)
* change default for find_multipaths to \"greedy\" (bsc#1099054)
* libmultipath: allow distributions to change partition_delim default (bsc#1073622, bsc#1056526)
* Mon Jun 25 2018 mwilckAATTsuse.com- Update to version 0.7.7+67+suse.a7d1e14:- RBD/RADOS backend support has been removed upstream remove support for it in SUSE, too (boo#1099037, FATE#826853)
* added Obsoletes: for multipath-tools-rbd.- libdmmp version has changed to 0.2.0- New patches not yet upstream: (Wed Jun 12 2018: these are now upstream, since 0.7.8)
* multipathd: fix mpp->hwe handling on path removal (boo#1099028)
* libmultipath: print correct default for delay_
*_checks (boo#1099026, bsc#1110418)
* libmultipath: avoid error messages from RDAC check (bsc#1108728, bsc#1075539)
* (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
* libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
* multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
* libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
* libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007)
* multipathd: fix buffer size in cli_getprkey (bsc#1099028)
* libmultipath: fix gcc 8.1 \"truncated output\" warnings (bsc#1099007)
* libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007)
* libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007)- SUSE specific patches preserved:
* multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
* kpartx: create symlinks for dmraid devices (bsc#1064212)
* multipath.conf.5: document no_partitons compat support (fate#323406)
* libmultipath: compat support for \'features \"1 no_partitions\"\' (fate#323406)
* Added fossology assessment as README.licenses (bsc#1088801)- Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0):
* libmultipath: don\'t [un]set queue_if_no_path after domap obsoleted by \"libmultipath: cleanup features handling code\"
* multipath.rules: use -i flag to multipath obsoleted by path detection patch series
* libmpathpersist: add support for prkeys file v3 obsoleted by \"mpathpersist: Fix invalid condition check\"
* libmultipath: fix deadlock in tur.c obsoleted by \"libmultipath: fix tur checker locking\"
* checkers/rbd: missing pthread_lock() on failure path obsolete because of RBD removal
* libmultipath/hwtable: don\'t hard-code ALUA for IBM IPR obsoleted by \"libmultipath: hwhandler auto-detection for ALUA\" and \"libmultipath: don\'t reject maps with undefined prio\" (bsc#1085212, bsc#1075129)- Update to upstream version 0.7.7+50 (39ad8dc8)- rework of \"find_multipaths\" logic
* find_multipaths can now be \"strict\", \"yes\", \"no\", \"greedy\", or \"smart\"
* SUSE default is \"greedy\" for now, consistent with previous behavior
* \"multipath -u -i\" not necessary in udev rules any more (removed SUSE patch \"multipath.rules: use -i flag to multipath\")- patch series for config file handling (bsc#1067789):
* fix inconsistent handling of multiple config file entries matching the same device (bsc#1067789)
* multipath: implement \"multipath -T\" (bsc#1067789)
* multipathd: implement \"show config local\" (bsc#1067789)
* libmultipath: merge \"multipath\" config sections by wwid
* multipathd: add path format wildcard \"%0\" for failures
* libmultipath: config parser: Allow \'\"\' in strings- multipath-tools: foreign/NVME implementation (bsc#1082419) for native NVME multipath configurations- Other new upstream features:
* mpathpersist: add all_tg_pt option
* add polling dmevent handler (only one thread waiting for device-mapper events rather than one per map).
* multipath: add \"ghost_delay\" parameter
* \"marginal path\" path state checking for better handling of unstable \"shaky\" connections in a SAN. conf options \"marginal_path_err_rate_threshold\" etc, see man page. This replaces the previous \"san_path_err_threshold\" functionality.- Upstream bug fixes:
* Man page corrections and improvements for multipath.conf(5)
* libmultipath: fix memory leak in process_config_dir() (bsc#1110352)
* multipath: don\'t check timestamps without a path
* multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
* libmultipath: don\'t reject maps with undefined prio (bsc#1085212, bsc#1075129)
* multipathd: fix reservation_key check (bsc#1099008)
* 11-dm-mpath.rules: dont\'t run \"multipath -U\" during coldplug (bsc#1084748)
* libmultipath: hwhandler auto-detection for ALUA (bsc#1085212, bsc#1075129)
* multipath: fix rcu thread cancellation hang (bsc#1110418)
* multipathd: register threads that use rcu calls (bsc#1110418)
* multipathd: fix waiter thread cancelling
* multipathd: use nanosleep for strict timing (avoids possible races with SIGALRM)
* logging fixes:
* libmultipath: fix log_pthread processing
* libmultipath: set dm_conf_verbosity
* libmultipath: fix basenamecpy
* libmultipath: uev_update_path: update path properties
* libmultipath: uev_update_path: always warn if WWID changed
* libmultipath: get_uid: don\'t quit prematurely without udev (bsc#1108728)
* libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728)
* libmultipath: fix wrong output of \"multipath -t\"
* Introduce the libmultipath/unaligned.h header file (bsc#1099036)
* libmultipath: Fix sgio_get_vpd() (bsc#1099484)
* kpartx: Improve reliability of find_loop_by_file()
* libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is \'\\0\'-terminated
* libmultipath: enable feature disable changed wwid by default
* multipathd: add lock protection for cli_list_status
* bug fixes for \"marginal path checker\"
* multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439, bsc#1086025)
* multipath-tools: add INSPUR/MCS to hardware table
* multipath-tools: add RDAC SUN/ArrayStorage to hwtable
* multipath-tools: remove DF arrays from HP
* multipath: print sysfs state in fast list mode (bsc#1110354)
* multipathd: remove coalesce_paths from ev_add_map
* multipath: fix DEF_TIMEOUT use
* libmultipath: fix tur checker locking
* multipath-tools: handle exit signal immediately (bsc#1086025)
* multipathd: release uxsocket and resource when cancel thread (bsc#1110355)
* path latency prioritizer fixes
* multipathd.service: set TasksMax=infinity (bsc#1060616)
* multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427)
* multipathd.socket: add WantedBy=sockets.target
* kpartx.rules: fix by-id/scsi-
* for user_friendly_names
* multipath -C: decrease log level
* libmultipath: hwtable: no_path_retry=\"queue\" for NetApp NVMe
* libmultipath: hwtable: multibus for NetApp NVMe-FC
* libmultipath: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241)
* libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
* libmultipath: condlog: log to stderr (bsc#1055949)
* multipath: delegate dangerous commands to multipathdd (bsc#1047639)
* libmultipath: don\'t try to set hwhandler if it is retained (bsc#1047639)
* libmultipath: don\'t update path queueing on reload
* multipathd: marginal path code fixes
* multipath: check failed path dmstate in check_path
* multipathd: clean up set_no_path_retry
* multipathd: fix device creation issues
* libmultipath: cleanup features handling code
* multipath: fix hwhandler check in select_action
* kpartx: don\'t delete partitions from partitions
* limbultipath: prefer RDAC checker with detect_checker
* multipath-tools: add AccelStor/NeoSapphire to hardware table
* multipath-tools: add TMS/RamSan to hardware table
* multipath-tools: add XIV/NEXTRA to hardware table
* multipath-tools: add XIOtech/Magnitude to hardware table
* libmultipath: ensure checker->fd == -1 if not set
* Thu Apr 12 2018 mwilckAATTsuse.com- Update to version 0.7.3+69+suse.218a0d0:
* multipath -ll: print foreign maps only with \"-o\" flag (bsc#1089353)
* Revert \"disable nvme foreign library\"
* Thu Apr 12 2018 mwilckAATTsuse.com- Update to version 0.7.3+67+suse.8f0c27b:
* disable nvme foreign library (bsc#1089353)
* Tue Apr 10 2018 mwilckAATTsuse.com- No functional changes- Fixed rpmlint warnings (bsc#1088946)
* multipath-tools-devel: moved .so files to /usr/lib[64]
* added version dependencies for -devel packages
* Tue Apr 10 2018 mwilckAATTsuse.com- No functional changes
* fixed SPDX syntax (and -> AND)
* added /usr/share/licenses
* Tue Apr 10 2018 mwilckAATTsuse.com<- No functional changes, just licenses- Spec file: fix %license tags and info after closer inspection (bsc#1088801)
* kpartx is under GPL-2.0-only
* rbd is under LGPL-2.1-only- Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801)
* Added fossology assessment as README.licenses
* multipath-tools: create LICENSES dir with the text of all used licences
* Fri Apr 06 2018 mwilckAATTsuse.com- Update to version 0.7.3+61+suse.d4d0494:
* 11-dm-mpath.rules: dont\'t run \"multipath -U\" during coldplug (bsc#1084748)
* Wed Mar 28 2018 mwilckAATTsuse.com- Fixed license tags in spec file
* multipath tools / libmultipath is GPL-2.0-only
* libmpathcmd is LGPL-2.0-or-later
* libdmmp is GPL-3.0-or-later
* adopt SPDX format.
* Wed Mar 28 2018 mwilckAATTsuse.com- Update to version 0.7.3+60+suse.46ac839:
* libmultipath/hwtable: don\'t hard-code ALUA for IBM IPR (bsc#1085212, bsc#1075129)
* Wed Mar 21 2018 mwilckAATTsuse.com- Update to version 0.7.3+59+suse.1b6191c26774:
* libmultipath: don\'t reject maps with undefined prio (bsc#1085212, bsc#1075129)
* multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
* Tue Mar 20 2018 mwilckAATTsuse.com- Update to version 0.7.3+57+suse.bb6be4c8b4ca:
* multipathd: fix signal blocking logic (bsc#1086025)
* multipath-tools: handle exit signal immediately (bsc#1086025)
* multipath: fix DEF_TIMEOUT use (bsc#1086014)
* multipath-tools: foreign/NVME implementation v2 (upstream accepted) (bsc#1082419)
* Mon Feb 26 2018 mwilckAATTsuse.com- Update to version 0.7.3+53+suse.140f4937e9e7:
* libmultipath: fix wrong output of \"multipath -t\" (bsc#1082835)
* Thu Feb 22 2018 mwilckAATTsuse.com- Update to version 0.7.3+52+suse.08a969b7fce0:- Add limited support for displaying native NVMe multipath (bsc#1082419)
* libmultipath: foreign/nvme: implement path display
* multipathd: use foreign API
* multipath: use foreign API
* libmultipath/foreign: nvme foreign library
* libmultipath/print: add \"%G - foreign\" wildcard
* libmultipath: API for foreign multipath handling
* libmultipath: print: use generic API for get_x_layout()
* libmultipath: print: convert API to generic data type
* libmultipath: \"generic multipath\" interface
* libmultipath: add vector_convert()
* libmultipath: add vector_free_const()
* libmultipath: get rid of selector \"hack\" in print.c- Fix locking errors detected by coverity check (bsc#1082418)
* checkers/rbd: missing pthread_lock() on failure path
* libmultipath: fix deadlock in tur.c
* Mon Feb 12 2018 mwilckAATTsuse.com- Fix whitespace in dracut conf file (bsc#1080562)
* Tue Jan 30 2018 mwilckAATTsuse.com- Update to version 0.7.3+38+suse.a16beed5280a:
* kpartx: don\'t delete partitions from partitions (bsc#1078362)
* hwtable: add latest updates (bsc#1078363)
* multipathd.service: set TasksMax=infinity (bsc#1060616)
* Fri Jan 26 2018 mwilckAATTsuse.com- Update to version 0.7.3+31+suse.6804bb73f72d:
* libmultipath: hwtable: no_path_retry=\"queue\" for NetApp NVMe (bsc#1073319)
* Fri Jan 19 2018 mwilckAATTsuse.com- Update to version 0.7.3+30+suse.6b5ed839:
* multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
* libmultipath: ignore natively multipathed NVME devices (bsc#1076828)
* multipath.rules: handle NVME devices (bsc#1076828)
* FIX \"libmultipath: hwtable: multibus for NetApp NVMe-FC\" (bsc#1073319)
* libmultipath: increase path product_id/rev field size for NVMe (bsc#1073319)
* Tue Jan 16 2018 mwilckAATTsuse.com- Update to version 0.7.3+25+suse.7c9920e2:
* assemble_map: no newline at end of params string (bsc#1072253)
* Thu Jan 11 2018 mwilckAATTsuse.com- Update to version 0.7.3+24+suse.703a61d5:
* multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427)
* libmultipath: hwtable: multibus for NetApp NVMe-FC (bsc#1073319)
* libmultipath/propsel: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241)
* libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
* libmultipath: sgio_get_vpd: add page argument (bsc#1055949)
* libmultipath: fix return code of sgio_get_vpd() (bsc#1055949)