Changelog for cryptsetup-ssh-2.5.0-2.2.x86_64.rpm :

* Tue Sep 13 2022 Luca Boccassi - Add virtual provides for \'integritysetup\' and \'veritysetup\' to match package names provided by Fedora/RHEL, to allow the same set of dependencies to be used across all RPM distributions.
* Mon Aug 22 2022 Ludwig Nussel - cryptsetup 2.5.0:
* Split manual pages into per-action pages and use AsciiDoc format.
* Remove cryptsetup-reencrypt tool from the project and move reencryption to already existing \"cryptsetup reencrypt\" command. If you need to emulate the old cryptsetup-reencrypt binary, use simple wrappers script running \"exec cryptsetup reencrypt $AATT\".
* LUKS2: implement --decryption option that allows LUKS removal.
* Fix decryption operation with --active-name option and restrict it to be used only with LUKS2.
* Do not refresh reencryption digest when not needed. This should speed up the reencryption resume process.
* Store proper resilience data in LUKS2 reencrypt initialization. Resuming reencryption now does not require specification of resilience type parameters if these are the same as during initialization.
* Properly wipe the unused area after reencryption with datashift in the forward direction.
* Check datashift value against larger sector size. For example, it could cause an issue if misaligned 4K sector appears during decryption.
* Do not allow sector size increase reencryption in offline mode.
* Do not allow dangerous sector size change during reencryption.
* Ask the user for confirmation before resuming reencryption.
* Do not resume reencryption with conflicting parameters.
* Add --force-offline-reencrypt option.
* Do not allow nested encryption in LUKS reencrypt.
* Support all options allowed with luksFormat with encrypt action.
* Add resize action to integritysetup.
* Remove obsolete dracut plugin reencryption example.
* Fix possible keyslot area size overflow during conversion to LUKS2.
* Allow use of --header option for cryptsetup close.
* Fix activation of LUKS2 device with integrity and detached header.
* Add ZEROOUT IOCTL support for crypt_wipe API call.
* VERITY: set loopback sector size according to dm-verity block sizes.
* veritysetup: dump device sizes.
* LUKS2 token: prefer token PIN query before passphrase in some cases. When a user provides --token-type or specific --token-id, a token PIN query is preferred to a passphrase query.
* LUKS2 token: allow tokens to be replaced with --token-replace option for cryptsetup token command.
* LUKS2 token: do not continue operation when interrupted in PIN prompt.
* Add --progress-json parameter to utilities.
* Add support for --key-slot option in luksResume action.- move man pages to separate subpackage- drop backports handling
* Fri Jan 14 2022 Andreas Stieger - cryptsetup 2.4.3:
* Fix possible attacks against data confidentiality through LUKS2 online reencryption extension crash recovery CVE-2021-4122, boo#1194469
* Add configure option --disable-luks2-reencryption to completely disable LUKS2 reencryption code.
* Improve internal metadata validation code for reencryption metadata
* Add updated documentation for LUKS2 On-Disk Format Specification version 1.1.0
* Fix support for bitlk (BitLocker compatible) startup key with new metadata entry introduced in Windows 11
* Fix space restriction for LUKS2 reencryption with data shift
* Thu Nov 18 2021 Andreas Stieger - cryptsetup 2.4.2:
* Fix possible large memory allocation if LUKS2 header size is invalid.
* Fix memory corruption in debug message printing LUKS2 checksum.
* veritysetup: remove link to the UUID library for the static build.
* Remove link to pwquality library for integritysetup and veritysetup. These tools do not read passphrases.
* OpenSSL3 backend: avoid remaining deprecated calls in API. Crypto backend no longer use API deprecated in OpenSSL 3.0
* Check if kernel device-mapper create device failed in an early phase. This happens when a concurrent creation of device-mapper devices meets in the very early state.
* Do not set compiler optimization flag for Argon2 KDF if the memory wipe is implemented in libc.
* Do not attempt to unload LUKS2 tokens if external tokens are disabled. This allows building a static binary with - -disable-external-tokens.
* LUKS convert: also check sysfs for device activity. If udev symlink is missing, code fallbacks to sysfs scan to prevent data corruption for the active device.
* Thu Sep 16 2021 Ludwig Nussel - cryptsetup 2.4.1
* Fix compilation for libc implementations without dlvsym().
* Fix compilation and tests on systems with non-standard libraries
* Try to workaround some issues on systems without udev support.
* Fixes for OpenSSL3 crypto backend (including FIPS mode).
* Print error message when assigning a token to an inactive keyslot.
* Fix offset bug in LUKS2 encryption code if --offset option was used.
* Do not allow LUKS2 decryption for devices with data offset.
* Fix LUKS1 cryptsetup repair command for some specific problems.
* Wed Aug 25 2021 Ludwig Nussel - As YaST passes necessary parameters to cryptsetup anyway, we do not necessarily need to take grub into consideration. So back to Argon2 to see how it goes.
* Tue Aug 03 2021 Ludwig Nussel - need to use PBKDF2 by default for LUKS2 as grub can\'t decrypt when using Argon.
* Mon Aug 02 2021 Ludwig Nussel - cryptsetup 2.4.0 (jsc#SLE-20275)
* External LUKS token plugins
* Experimental SSH token
* Default LUKS2 PBKDF is now Argon2id
* Increase minimal memory cost for Argon2 benchmark to 64MiB.
* Autodetect optimal encryption sector size on LUKS2 format.
* Use VeraCrypt option by default and add --disable-veracrypt option.
* Support --hash and --cipher to limit opening time for TCRYPT type
* Fixed default OpenSSL crypt backend support for OpenSSL3.
* integritysetup: add integrity-recalculate-reset flag.
* cryptsetup: retains keyslot number in luksChangeKey for LUKS2.
* Fix cryptsetup resize using LUKS2 tokens.
* Add close --deferred and --cancel-deferred options.
* Rewritten command-line option parsing to avoid libpopt arguments memory leaks.
* Add --test-args option.
* Mon Aug 02 2021 Fabian Vogt - Use LUKS2 as default format on Tumbleweed. It provides some additional features which other tools (e.g. systemd-cryptenroll) rely on. GRUB 2.06 supports unlocking LUKS2 volumes meanwhile.
* Thu Jul 01 2021 Ludwig Nussel - cryptsetup 2.3.6:
* integritysetup: Fix possible dm-integrity mapping table truncation.
* cryptsetup: Backup header can be used to activate TCRYPT device. Use --header option to specify the header.
* cryptsetup: Avoid LUKS2 decryption without detached header. This feature will be added later and is currently not supported.
* Additional fixes and workarounds for common warnings produced by some static analysis tools (like gcc-11 analyzer) and additional code hardening.
* Fix standalone libintl detection for compiled tests.
* Add Blake2b and Blake2s hash support for crypto backends. Kernel and gcrypt crypto backend support all variants. OpenSSL supports only Blake2b-512 and Blake2s-256. Crypto backend supports kernel notation e.g. \"blake2b-512\".
* Sat Mar 13 2021 Andreas Stieger - cryptsetup 2.3.5:
* Fix partial reads of passphrase from an interactive terminal
* Fix maximum length of password entered through a terminal
* integritysetup: support new dm-integrity HMAC recalculation options
* integritysetup: display of recalculating sector in dump command
* veritysetup: fix verity FEC if stored in the same image with hashes
* veritysetup: run FEC repair check even if root hash fails
* veritysetup: do not process hash image if hash area is empty
* veritysetup: store verity hash algorithm in superblock in lowercase
* bitlk: fix a crash if the device disappears during BitLocker scan
* bitlk: show a better error when trying to open an NTFS device
* bitlk: add support for startup key protected VMKs
* Fix LUKS1 repair code (regression since version 1.7.x)
* Fix luksKeyChange for LUKS2 with assigned tokens
* Fix cryptsetup resize using LUKS2 tokens
* Print a visible error if device resize is not supported
* Add error message when suspending wrong non-LUKS device
* Fix default XTS mode key size in reencryption
* Rephrase missing locking directory warning and move it to debug level
* Many fixes for the use of cipher_null (empty debug cipher)
* Fixes for libpasswdqc 2.0.x (optional passphrase quality check)
* Fixes for problems discovered by various tools for code analysis
* Various fixes to man pages- silence hmac packaging warnings
* Fri Mar 12 2021 Dirk Müller - move licenses to licensedir
* Tue Dec 08 2020 Ludwig Nussel - SLE marker: implements jsc#SLE-5911, bsc#1165580, jsc#SLE-145149
* Wed Nov 04 2020 Ludwig Nussel - prepare usrmerge (boo#1029961)
* Fri Sep 04 2020 Ludwig Nussel - Update to 2.3.4:
* Fix a possible out-of-bounds memory write while validating LUKS2 data segments metadata (CVE-2020-14382, boo#1176128).
* Ignore reported optimal IO size if not aligned to minimal page size.
* Added support for new no_read/write_wrokqueue dm-crypt options (kernel 5.9).
* Added support panic_on_corruption option for dm-verity devices (kernel 5.9).
* Support --master-key-file option for online LUKS2 reencryption
* Always return EEXIST error code if a device already exists.
* Fix a problem in integritysetup if a hash algorithm has dash in the name.
* Fix crypto backend to properly handle ECB mode.
* TrueCrypt/VeraCrypt compatible mode now supports the activation of devices with a larger sector.
* LUKS2: Do not create excessively large headers.
* Fix unspecified sector size for BitLocker compatible mode.
* Fix reading key data size in metadata for BitLocker compatible mode.
* Thu May 28 2020 Andreas Stieger - Update to 2.3.3:
* Fix BitLocker compatible device access that uses native 4kB sectors
* Support large IV count (--iv-large-sectors) cryptsetup option for plain device mapping
* Fix a memory leak in BitLocker compatible handling
* Allow EBOIV (Initialization Vector algorithm) use
* LUKS2: Require both keyslot cipher and key size option, do not fail silently- includes changes from 2.3.2:
* Add option to dump content of LUKS2 unbound keyslot
* Add support for discards (TRIM) for standalone dm-integrity devices (Kernel 5.7) via --allow-discards, not for LUKS2
* Fix cryptsetup-reencrypt to work on devices that do not allow direct-io device access.
* Fix a crash in the BitLocker-compatible code error path
* Fix Veracrypt compatible support for longer (>64 bytes) passphrases
* Thu Apr 02 2020 Ludwig Nussel - Split translations to -lang package- New version to 2.3.1
* Support VeraCrypt 128 bytes passwords. VeraCrypt now allows passwords of maximal length 128 bytes (compared to legacy TrueCrypt where it was limited by 64 bytes).
* Strip extra newline from BitLocker recovery keys There might be a trailing newline added by the text editor when the recovery passphrase was passed using the --key-file option.
* Detect separate libiconv library. It should fix compilation issues on distributions with iconv implemented in a separate library.
* Various fixes and workarounds to build on old Linux distributions.
* Split lines with hexadecimal digest printing for large key-sizes.
* Do not wipe the device with no integrity profile. With --integrity none we performed useless full device wipe.
* Workaround for dm-integrity kernel table bug. Some kernels show an invalid dm-integrity mapping table if superblock contains the \"recalculate\" bit. This causes integritysetup to not recognize the dm-integrity device. Integritysetup now specifies kernel options such a way that even on unpatched kernels mapping table is correct.
* Print error message if LUKS1 keyslot cannot be processed. If the crypto backend is missing support for hash algorithms used in PBKDF2, the error message was not visible.
* Properly align LUKS2 keyslots area on conversion. If the LUKS1 payload offset (data offset) is not aligned to 4 KiB boundary, new LUKS2 keyslots area in now aligned properly.
* Validate LUKS2 earlier on conversion to not corrupt the device if binary keyslots areas metadata are not correct.
* Tue Feb 04 2020 Paolo Stivanin - Update to 2.3.0 (include release notes for 2.2.0)
* BITLK (Windows BitLocker compatible) device access
* Veritysetup now supports activation with additional PKCS7 signature of root hash through --root-hash-signature option.
* Integritysetup now calculates hash integrity size according to algorithm instead of requiring an explicit tag size.
* Integritysetup now supports fixed padding for dm-integrity devices.
* A lot of fixes to online LUKS2 reecryption.
* Add crypt_resume_by_volume_key() function to libcryptsetup. If a user has a volume key available, the LUKS device can be resumed directly using the provided volume key. No keyslot derivation is needed, only the key digest is checked.
* Implement active device suspend info. Add CRYPT_ACTIVATE_SUSPENDED bit to crypt_get_active_device() flags that informs the caller that device is suspended (luksSuspend).
* Allow --test-passphrase for a detached header. Before this fix, we required a data device specified on the command line even though it was not necessary for the passphrase check.
* Allow --key-file option in legacy offline encryption. The option was ignored for LUKS1 encryption initialization.
* Export memory safe functions. To make developing of some extensions simpler, we now export functions to handle memory with proper wipe on deallocation.
* Fail crypt_keyslot_get_pbkdf for inactive LUKS1 keyslot.
* Add optional global serialization lock for memory hard PBKDF.
* Abort conversion to LUKS1 with incompatible sector size that is not supported in LUKS1.
* Report error (-ENOENT) if no LUKS keyslots are available. User can now distinguish between a wrong passphrase and no keyslot available.
* Fix a possible segfault in detached header handling (double free).
* Add integritysetup support for bitmap mode introduced in Linux kernel 5.2.
* The libcryptsetup now keeps all file descriptors to underlying device open during the whole lifetime of crypt device context to avoid excessive scanning in udev (udev run scan on every descriptor close).
* The luksDump command now prints more info for reencryption keyslot (when a device is in-reencryption).
* New --device-size parameter is supported for LUKS2 reencryption.
* New --resume-only parameter is supported for LUKS2 reencryption.
* The repair command now tries LUKS2 reencryption recovery if needed.
* If reencryption device is a file image, an interactive dialog now asks if reencryption should be run safely in offline mode (if autodetection of active devices failed).
* Fix activation through a token where dm-crypt volume key was not set through keyring (but using old device-mapper table parameter mode).
* Online reencryption can now retain all keyslots (if all passphrases are provided). Note that keyslot numbers will change in this case.
* Allow volume key file to be used if no LUKS2 keyslots are present.
* Print a warning if online reencrypt is called over LUKS1 (not supported).
* Fix TCRYPT KDF failure in FIPS mode.
* Remove FIPS mode restriction for crypt_volume_key_get.
* Reduce keyslots area size in luksFormat when the header device is too small.
* Make resize action accept --device-size parameter (supports units suffix).
* Thu Oct 17 2019 Vítězslav Čížek - Create a weak dependency cycle between libcryptsetup and libcryptsetup-hmac to make sure they are installed together (bsc#1090768)
* Fri Feb 15 2019 Jan Engelhardt - Use noun phrase in summary.
* Fri Feb 15 2019 lnusselAATTsuse.de- New version 2.1.0
* The default size of the LUKS2 header is increased to 16 MB. It includes metadata and the area used for binary keyslots; it means that LUKS header backup is now 16MB in size.
* Cryptsetup now doubles LUKS default key size if XTS mode is used (XTS mode uses two internal keys). This does not apply if key size is explicitly specified on the command line and it does not apply for the plain mode. This fixes a confusion with AES and 256bit key in XTS mode where code used AES128 and not AES256 as often expected.
* Default cryptographic backend used for LUKS header processing is now OpenSSL. For years, OpenSSL provided better performance for PBKDF.
* The Python bindings are no longer supported and the code was removed from cryptsetup distribution. Please use the libblockdev project that already covers most of the libcryptsetup functionality including LUKS2.
* Cryptsetup now allows using --offset option also for luksFormat.
* Cryptsetup now supports new refresh action (that is the alias for \"open --refresh\").
* Integritysetup now supports mode with detached data device through new --data-device option.- 2.1.0 would use LUKS2 as default, we stay with LUKS1 for now until someone has time to evaluate the fallout from switching to LUKS2.
* Tue Oct 30 2018 lnusselAATTsuse.de- Suggest hmac package (boo#1090768)- remove old upgrade hack for upgrades from 12.1- New version 2.0.5 Changes since version 2.0.4 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Wipe full header areas (including unused) during LUKS format. Since this version, the whole area up to the data offset is zeroed, and subsequently, all keyslots areas are wiped with random data. This ensures that no remaining old data remains in the LUKS header areas, but it could slow down format operation on some devices. Previously only first 4k (or 32k for LUKS2) and the used keyslot was overwritten in the format operation.
* Several fixes to error messages that were unintentionally replaced in previous versions with a silent exit code. More descriptive error messages were added, including error messages if - a device is unusable (not a block device, no access, etc.), - a LUKS device is not detected, - LUKS header load code detects unsupported version, - a keyslot decryption fails (also happens in the cipher check), - converting an inactive keyslot.
* Device activation fails if data area overlaps with LUKS header.
* Code now uses explicit_bzero to wipe memory if available (instead of own implementation).
* Additional VeraCrypt modes are now supported, including Camellia and Kuznyechik symmetric ciphers (and cipher chains) and Streebog hash function. These were introduced in a recent VeraCrypt upstream. Note that Kuznyechik requires out-of-tree kernel module and Streebog hash function is available only with the gcrypt cryptographic backend for now.
* Fixes static build for integritysetup if the pwquality library is used.
* Allows passphrase change for unbound keyslots.
* Fixes removed keyslot number in verbose message for luksKillSlot, luksRemoveKey and erase command.
* Adds blkid scan when attempting to open a plain device and warn the user about existing device signatures in a ciphertext device.
* Remove LUKS header signature if luksFormat fails to add the first keyslot.
* Remove O_SYNC from device open and use fsync() to speed up wipe operation considerably.
* Create --master-key-file in luksDump and fail if the file already exists.
* Fixes a bug when LUKS2 authenticated encryption with a detached header wiped the header device instead of dm-integrity data device area (causing unnecessary LUKS2 header auto recovery).
* Tue Oct 30 2018 lnusselAATTsuse.de- make parallell installable version for SLE12
* Tue Aug 21 2018 lnusselAATTsuse.de- New version 2.0.4 Changes since version 2.0.3 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Use the libblkid (blockid) library to detect foreign signatures on a device before LUKS format and LUKS2 auto-recovery. This change fixes an unexpected recovery using the secondary LUKS2 header after a device was already overwritten with another format (filesystem or LVM physical volume). LUKS2 will not recreate a primary header if it detects a valid foreign signature. In this situation, a user must always use cryptsetup repair command for the recovery. Note that libcryptsetup and utilities are now linked to libblkid as a new dependence. To compile code without blockid support (strongly discouraged), use --disable-blkid configure switch.
* Add prompt for format and repair actions in cryptsetup and integritysetup if foreign signatures are detected on the device through the blockid library. After the confirmation, all known signatures are then wiped as part of the format or repair procedure.
* Print consistent verbose message about keyslot and token numbers. For keyslot actions: Key slot unlocked/created/removed. For token actions: Token created/removed.
* Print error, if a non-existent token is tried to be removed.
* Add support for LUKS2 token definition export and import. The token command now can export/import customized token JSON file directly from command line. See the man page for more details.
* Add support for new dm-integrity superblock version 2.
* Add an error message when nothing was read from a key file.
* Update cryptsetup man pages, including --type option usage.
* Add a snapshot of LUKS2 format specification to documentation and accordingly fix supported secondary header offsets.
* Add bundled optimized Argon2 SSE (X86_64 platform) code. If the bundled Argon2 code is used and the new configure switch - -enable-internal-sse-argon2 option is present, and compiler flags support required optimization, the code will try to use optimized and faster variant. Always use the shared library (--enable-libargon2) if possible. This option was added because an enterprise distribution rejected to support the shared Argon2 library and native support in generic cryptographic libraries is not ready yet.
* Fix compilation with crypto backend for LibreSSL >= 2.7.0. LibreSSL introduced OpenSSL 1.1.x API functions, so compatibility wrapper must be commented out.
* Fix on-disk header size calculation for LUKS2 format if a specific data alignment is requested. Until now, the code used default size that could be wrong for converted devices. Changes since version 2.0.2 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Expose interface to unbound LUKS2 keyslots. Unbound LUKS2 keyslot allows storing a key material that is independent of master volume key (it is not bound to encrypted data segment).
* New API extensions for unbound keyslots (LUKS2 only) crypt_keyslot_get_key_size() and crypt_volume_key_get() These functions allow to get key and key size for unbound keyslots.
* New enum value CRYPT_SLOT_UNBOUND for keyslot status (LUKS2 only).
* Add --unbound keyslot option to the cryptsetup luksAddKey command.
* Add crypt_get_active_integrity_failures() call to get integrity failure count for dm-integrity devices.
* Add crypt_get_pbkdf_default() function to get per-type PBKDF default setting.
* Add new flag to crypt_keyslot_add_by_key() to force update device volume key. This call is mainly intended for a wrapped key change.
* Allow volume key store in a file with cryptsetup. The --dump-master-key together with --master-key-file allows cryptsetup to store the binary volume key to a file instead of standard output.
* Add support detached header for cryptsetup-reencrypt command.
* Fix VeraCrypt PIM handling - use proper iterations count formula for PBKDF2-SHA512 and PBKDF2-Whirlpool used in system volumes.
* Fix cryptsetup tcryptDump for VeraCrypt PIM (support --veracrypt-pim).
* Add --with-default-luks-format configure time option. (Option to override default LUKS format version.)
* Fix LUKS version conversion for detached (and trimmed) LUKS headers.
* Add luksConvertKey cryptsetup command that converts specific keyslot from one PBKDF to another.
* Do not allow conversion to LUKS2 if LUKSMETA (external tool metadata) header is detected.
* More cleanup and hardening of LUKS2 keyslot specific validation options. Add more checks for cipher validity before writing metadata on-disk.
* Do not allow LUKS1 version downconversion if the header contains tokens.
* Add \"paes\" family ciphers (AES wrapped key scheme for mainframes) to allowed ciphers. Specific wrapped ley configuration logic must be done by 3rd party tool, LUKS2 stores only keyslot material and allow activation of the device.
* Add support for --check-at-most-once option (kernel 4.17) to veritysetup. This flag can be dangerous; if you can control underlying device (you can change its content after it was verified) it will no longer prevent reading tampered data and also it does not prevent silent data corruptions that appear after the block was once read.
* Fix return code (EPERM instead of EINVAL) and retry count for bad passphrase on non-tty input.
* Enable support for FEC decoding in veritysetup to check dm-verity devices with additional Reed-Solomon code in userspace (verify command). Changes since version 2.0.1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Fix a regression in early detection of inactive keyslot for luksKillSlot. It tried to ask for passphrase even for already erased keyslot.
* Fix a regression in loopaesOpen processing for keyfile on standard input. Use of \"-\" argument was not working properly.
* Add LUKS2 specific options for cryptsetup-reencrypt. Tokens and persistent flags are now transferred during reencryption; change of PBKDF keyslot parameters is now supported and allows to set precalculated values (no benchmarks).
* Do not allow LUKS2 --persistent and --test-passphrase cryptsetup flags combination. Persistent flags are now stored only if the device was successfully activated with the specified flags.
* Fix integritysetup format after recent Linux kernel changes that requires to setup key for HMAC in all cases. Previously integritysetup allowed HMAC with zero key that behaves like a plain hash.
* Fix VeraCrypt PIM handling that modified internal iteration counts even for subsequent activations. The PIM count is no longer printed in debug log as it is sensitive information. Also, the code now skips legacy TrueCrypt algorithms if a PIM is specified (they cannot be used with PIM anyway).
* PBKDF values cannot be set (even with force parameters) below hardcoded minimums. For PBKDF2 is it 1000 iterations, for Argon2 it is 4 iterations and 32 KiB of memory cost.
* Introduce new crypt_token_is_assigned() API function for reporting the binding between token and keyslots.
* Allow crypt_token_json_set() API function to create internal token types. Do not allow unknown fields in internal token objects.
* Print message in cryptsetup that about was aborted if a user did not answer YES in a query.
* Tue Jan 30 2018 astiegerAATTsuse.com- update to 2.0.1:
* To store volume key into kernel keyring, kernel 4.15 with dm-crypt 1.18.1 is required
* Increase maximum allowed PBKDF memory-cost limit to 4 GiB
* Use /run/cryptsetup as default for cryptsetup locking dir
* Introduce new 64-bit byte-offset
*keyfile_device_offset functions.
* New set of fucntions that allows 64-bit offsets even on 32bit systems are now availeble: - crypt_resume_by_keyfile_device_offset - crypt_keyslot_add_by_keyfile_device_offset - crypt_activate_by_keyfile_device_offset - crypt_keyfile_device_read The new functions have added the _device_ in name. Old functions are just internal wrappers around these.
* Also cryptsetup --keyfile-offset and --new-keyfile-offset now allows 64-bit offsets as parameters.
* Add error hint for wrongly formatted cipher strings in LUKS1 and properly fail in luksFormat if cipher format is missing required IV.