Changelog for solaar-1.1.13-88.1.noarch.rpm :

* Sat May 11 2024 asnAATTcryptomilk.org- Update to version 1.1.13:
* release 1.1.13
* po: update Russian translation
* po: Update Polish translation
* release 1.1.13rc1
* solaar: fix bug in suspend and resume callback
* settings: add choices universe for backlight setting
* diversion: Add unit tests
* diversion: Simplify and type hint
* settings: get and use current host number for K375sFnSwap because of bug in firmware of MX Keys S
* ui: fix bug with logo in about window
* solaar: don\'t ping device just to get logging information
* settings: optimize write for per-key lighting
* settings: add and initialize per-key lighting to a special no-change value
* hidapi: Remove Python 2 compatibility (#2460)
* po: Update French translation (for release 1.1.12) (#2458)
* Refactor rule loading for testability (#2456)
* Mon Apr 29 2024 asnAATTcryptomilk.org- Update to version 1.1.12:
* release 1.1.12
* po: Update zh_TW Traditional Chinese translation
* release 1.1.12rc2
* device: check for existences of keys file before opening
* po: update Russion translation and have all strings translated
* po: update Russian translation (#2443)
* dist: add included hid_parser to packages installed
* po: Update Polish translation (#2439)
* settings: improve label and description for LED zone settings
* settings: add message about Onboard Profiles to LED Zone settings
* device: initialize device registers to empty list
* po: Update Polish translation (#2435)
* release 1.1.12rc1
* release 1.1.12rc1
* solaar: use bluez dbus signals to disconnect and connect bluetooth devices
* device: handle a different signal for onboard profiles directory in ROM
* receiver: introduce small delay in getting pairing information to let receiver settle after pairing
* tests: extend tests for device.py
* device: fix bug found in testing
* tests: expand tests for device.py
* device: fix small bugs uncovered by testing
* tests: expand tests for settings_templates
* tests: extend testing of hidpp20
* device: fix bugs in onboard profiles found during testing
* tests: extend testing of hidpp20
* device: fix bugs in hidpp20 found during testing
* tests: extend device testing
* tests: test GESTURES settings
* tests: extend testing of hidpp20
* Updated Greek Translation
* doc: add information about bad interaction between Bluez 5.73 and Solaar
* tests: expand tests for settings_templates
* device: better support for extended ajustable dpi
* device: limited support for extended adjustable dpi
* tests: remove unused code
* tests: adjust imports to always import installed version
* tests: test more settings
* settings: remove unused code and fix but in EQUALIZER setting
* settings: provide symbolic names for per-key lighting keys
* tests: improve infrastructure for testing setting_templates
* settings: implement and test per-key lighting
* tests: check for Gtk initialization and don\'t run tests that depend on it
* tests: test GUI pair_window
* ui: refactor pair_window
* tests: fix tests for RBG effects
* settings: add in bit telling RGB effects changes to change ROM
* ui: handle situation when read of a setting fails
* settings: permit continuing when a read during pushing fails
* tests: add tests for RGB EFFECTS settings
* settings: add settings for RGB EFFECTS feature
* settings: fix bug in LEDZoneSetting when effect is not implemented
* device: add RGB EFFECTS feature version of LED COLOR EFFECTS data
* tests: add tests for LEDEffect structures in hidpp20
* device: handle BRIGHTNESS CONTROL notifications
* settings: implement and test BRIGHTNESS_CONTROL
* tests: expand tests for settings_templates
* settings: fix small bugs found from testing
* refactor: Manually improve f-string formatting
* refactor: Use f-strings for more exceptions and log message
* settings: patch to make python 3.7 happy
* tests: expand tests for settings_templates
* tests: use new test methods in test_hidpp20_simple
* tests: add tests for setting_templates
* settings: simple change to improve testability
* device: use feature_request from the device everywhere in hidpp20
* settings: fix bug in backlight 2 durations
* tests: fix finding paired node in test_device
* tests: use hidpp module in several test modules
* tests: add tests for logitech_receiver device
* ui: reduce deprecation warnings in ui
* hidapi: remove deprecation warnings
* tests: improve coverage of receiver.py
* device: align init methods for all receiver classes
* tests: use 3.7 type hint
* tests: improve hidpp20 coverage
* tests: fully cover hidpp10
* device: fix bug in hidpp10 get_device_features
* refactor: Use dataclass for TestByte
* refactor: Split diversion rules into smaller modules
* refactor: Make _populate_model a function
* rules: allow sub-second delays in Later
* device: remove unreachable code
* device: fix bug in setting configuration cookie due to bad documentation
* Add new end line
* Add solaar pot generation
* Add indonesian translations
* tests: complete testing of common
* tests: start coverage of complex structures in hidpp20
* tests: expand coverage of hidpp20
* tests: expand coverage of common
* ruff: Apply single line import format
* ruff: Force single line imports
* Automatically upgrade strings to f-string
* docs: document battery-icons=solaar option
* receiver: delay device sending first messages
* device: remove checks for status attributes
* device: optimize some functions in FeaturesArray
* device: fix bug in creating features array
* cli: fix bug in building battery line in show
* ui: refactor diversion_rules
* ui: fix bug in determining tray icon
* device: fix bug in getting friendly name
* device: remove status from Device and Receiver
* device: move changed method from status to Device and Receiver
* device: move link_encrypted from status to Device
* device: move battery information from status to Device
* device: move status string function to Device and Receiver
* receiver: move pairing status to new dataclass attached to receiver
* test: Test base product information
* Disable macOS tests until GitHub CI dependencies are fixed
* Extend Ubuntu dependencies for GitHub CI
* test: Extract get_kind_from_index function and test it
* docs: update EX100 information
* device: use Python 3.7 type hints
* device: use status attribute for error
* device: use status attribute for notification_flags
* device: use status attribute for link_encrypted
* ui: use Battery object in GUI
* device: change status battery fields to Battery objects
* receiver: move more method code to subclasses
* receiver: create subclasses of receiver for different variants
* docs: add requirement for CONFIG_HIDRAW
* tests: tests for a few simple hidpp20 functions
* tests: add yaml test for led setting
* tests: simple tests for hidpp20 profiles and lighting
* ui: fix app name casing in UI
* device: add missing receiver type for Lightspeed receivers
* device: add new device types
* refactor: Get receiver product info before instantiation
* Refactor: Move Device instantiation to factory class
* Refactor: Move Receiver instantiation to factory class
* Simplify name of license file
* Rename changelog.md to all capitals
* Update .gitignore
* Remove unused .gitmodules
* fix: Use exception from exception module
* update: Replace legacy logger.warn with logger.warning
* cleanup: Remove duplicated code to read register
* tests: Add hidpp10 tests
* refactor: Introduce Hidpp20 class
* refactor: Introduce Hidpp10 class
* cleanup: Remove unnecessary calls of del
* settings: fix bug when reading BACKLIGHT setting from device
* clean up: Remove editor specific marks
* fix: Replace invalid hidpp20 usage
* fix: Replace invalid hidpp10 usage
* solaar: use only timer thread to save config.yaml
* docs: improve README.md
* doc: Add link to Debian package to README.md
* docs: adjust image placing in README
* docs: adjust image size in README
* docs: improve README
* hid: copy newer version of hid_parser into Solaar codebase
* ui: fix bug when displaying receiver notification flags
* device: reorder code in settings
* doc: update installation documentation
* hidapi: make hid_parser optional, but add it to setup
* device: add missing license blocks
* device: clean up listener and notifications code
* solaar: cleanup listener code
* solaar: add locks to prevent multiple persisters for device
* solaar: clean up configuration code
* device: clean up device and receiver code
* device: move battery constants common to HID++ 1.0 and 2.0 to common
* device: move mapping of device kind into hidpp20
* device: move pairing information gathering to receiver
* docs: update contributors
* solaar: fix debugging levels
* device: expand allowable profile numbers
* device: clean up __init__ in logitech_receiver
* dist: modify pre-commit args to make ruff change files
* device: fix bug in hidpp20 get host names
* device: fix typo
* Remove yapf exclusions
* Manually fix linter issues
* Apply ruff format
* Makefile: Add command for formatting and linting
* Introduce ruff formatter and linter
* rules: fix bug in Set action
* device: add notify module to logitech_receiver
* ui: implement setting_changed callback and pass in to new devices and receivers
* device: add callback to call when changing a setting
* logitech_receiver: style fixes
* logitech_receiver: Move hidpp20 constants into new module
* logitech_receiver: Move hidpp10 constants into new module
* logitech_receiver: Move exceptions into own module
* device: streamline status code
* hidapi: upgrade debugging in udev
* dist: Fix deprecated GitHub actions
* dist: extend makefile and tests
* device: improve features array
* ui: move ui_async to common.py
* tests: Show pytest coverage in GitHub CI tests
* device: improve imports in logitech_receiver
* solaar: improve imports and guard Gtk, etc imports with correct version
* ui: improve imports in ui
* cli: move imports in __init__.py to top of file
* device: improve imports in logitech_receiver
* tests: Add tests of common module
* Wed Mar 20 2024 asnAATTcryptomilk.org- Update to version 1.1.11:
* release 1.1.11
* dist: Add the tag in the metainfo
* dist: correctly find light icons
* release 1.1.11rc4
* dist: rename light icons and install them in correct place
* macos: Remove dbus from macos dependencies
* Setup macOS tests using GitHub action (#2284)
* release 1.1.11rc3
* ui: better checking for setting in record_setting
* po: Update Polish translation (#2275)
* Fix invalid func name set logo name
* release 1.1.11rc2
* udev: Simplify installation of udev rules
* doc: add document on implementation
* ui: tidy up scrolling appearance in configuration panel
* device: correctly handle profile button with no action
* ui: don\'t unlock setting when changed by external means
* ui: refactor code to record change to setting
* tests: Add GitHub action for tests
* tests: Introduce tests with pytest
* logging: Simplify logger instantiation
* ui: update label and tooltip for divert-gkeys setting
* ui: update label and tooltip for divert-gkeys setting
* ui: don\'t lock setting when an error occurs
* cli: catch assertion errors when reading setting values from devices
* po: Update Polish translation (#2252)
* release 1.1.11rc1
* release 1.1.11rc1
* device: remove dependency on webcolors
* device: clean up data for LED effects
* ui: better startup behavior for LED effect settings
* ui: add UI for LED Zone control
* device: add settings for LED Zone control
* device: add structures for LED control
* ui: add setting to change LED control between firmware and software
* docs: document profiles
* device: handle v4 of profiles data
* device: better handing of unknown values in profiles
* device: add version and device name to profiles
* device: read profiles from ROM if none in Flash
* device: decipher LED control info in profiles
* cli: report more information on exception when loading profiles
* ui: handle onboard profiles notifications
* ui: upgrade onboard profiles setting to allow profile selection
* device: support onboard profiles
* device: remove extra debugging for backlight
* ui: handle backlight notification
* device: support backlight levels and duration
* device: support bug in backlight on MX Keys S
* cli: no numbers for USB and Bluetooth devices
* devices: override name of Candy Companion Chip
* po: Update RU language translation (#2242)
* po: Mention language pack for Gnome in i18n.md (#2241)
* ui: use Report Rate instead of Polling for movement report rate
* device: add extended report rate setting
* release: Add stable branch to release.sh (#2236)
* release: fix changelog parsing in release.sh after d57af51316799252fdc67f575dc72d2568b3e48c (#2235)
* docs: Update installation.md with new udev rules location (#2234)
* ui: downgrade assertion on missing notification flag to warning
* docs: add descriptions of G305 and MX Keys S
* rules: write empty file if there are no rules to save
* cli: be defensive in device error message
* docs: add descriptions of M650 and PRO X 2
* udev: report hidraw node in debugging messages
* device: add names for new Logitech features
* po: Spanish translation reviewed (#2209)
* docs: add file for G915
* gui: defend against lightspeed receivers that contact devices for basic information
* docs: add files for MX Anywhere 2S and G915
* device: remove incorrect feature for M325 mice
* device: add K845 keyboard
* rules: style fix
* Partial support for macOS and Windows (#1971)
* device: correctly enumerate devices on receiver
* docs: add wording about Logitech reusing model numbers
* ui: better handling and installation of icons
* device: catch errors when pinging to try to put device online
* ui: be more cautious when creating log messages to avoid exceptions
* cli: handle NoSuchDevice exception when pinging device
* rules: fix test for device equality
* docs: add note about other GTK system packages
* docs: add instructions for pipx
* NamedInt: return False on comparison with None
* device: add support for MK550
* dist: install .rules to correct place by default
* device: add connection request failed error to expected ping responses
* ui: update codename when device status changes
* doc: fix typos (#2152)
* Update French translation (for release 1.1.10)- Add missing dependency to typelib-AyatanaAppIndicator3
* Wed Oct 18 2023 Andreas Schneider - Add missing Require for dbus
* Mon Oct 02 2023 asnAATTcryptomilk.org- Update to version 1.1.10:
* release 1.1.10
* pointer to NixOS flake package
* release 1.1.10.rc3
* release 1.1.10rc2
* tools: permit BT devices for hidconsole with hidpp
* device: add descriptor for Logitech MX Revolution Mouse M-RCL 124
* device: allow return device 00 for BT device ff
* device: improve determination of short or long messages
* device: add descriptor for G500s
* tools: fix bug in scan-registers
* rules: add single depress and release options for rule mouse click action
* rules: add rule condition for hostname
* tools: update keysym generation to current list of keysyms
* tools: allow device 0 in hidconsole
* Update Arch repository name and link
* doc: install recent version before opening issues
* device: upgrade messages when no supported device found
* Documentation update to mention the gnome extension to get rules working under Wayland (#2103)
* Remove udev-acl tag from udev rules
* Add support for process condition under wayland using solaar-gnome-extension (#2101)
* Updated German Translation
* po: update pot-file
* po: Update zh_TW Traditional Chinese locale
* hidapi: retry open several times with short wait to allow for delay in setting up permissions
* Update French translation
* Update French translation for 1.1.9 release
* Update about.py
* device: add new ID for G733 Headset
* misc: restore tools/clean.sh
* device: add bluetooth keyboard C714
* tools: update scan-registers.sh to fix a bug and scan pairing registers
* device: remove assertion on last byte of ping responses
* ui: add symbolic version of solaar icon
* docs: add description of several devices
* device: add MX Vertical mouse (#2053)
* device: when finding name or codename ping if not known to be online
* device: fix bug in decoding G keys notification
* docs: Standardise URLs and fix wording in i18n.md
* docs: Fix wording in installation.md (#2040)
* docs: Fix link and wording in devices.md (#2039)
* docs: Add missing word in usage.md (#2038)
* ui: put version in initial INFO logging message
* ui: rearrange code in tray.py- Ensure to only use one python version
* Tue Apr 11 2023 asnAATTcryptomilk.org- Update to version 1.1.9:
* device: add descriptior for EX110 keyboard
* release 1.1.9rc2
* device: Add support for G535 wireless gaming headset (#2034)
* docs: Fix punctuation and language in rules.md (#2032)
* po: updated greek translation (#2030)
* Fix sentences and punctuation in features.md (#2029)
* docs: Fix spelling and capitalisation in index.md (#2028)
* Fix punctuation and wording in capabilities.md
* Update Polish translation
* release 1.1.9rc1
* docs: add description for LIFT mouse
* ui: remove deprecated GTK code
* ui: zero exit code for kill interrupts
* docs: update information about MX Master 3 for Business
* rules: add Test condition for battery charging
* doc: add description of G304 Lightspeed Wireless Gaming Mouse
* device: get wpid for 28Mz devices from udev when enumerating
* ui: add editing of Device rule condition
* rules: add Device condition
* docs: add Logi Pop Keys description
* ui: don\'t show wireless link or battery information when unknown or not present
* ui: online devices with no battery information probably don\'t have a battery
* device: add desccriptor for G9x
* receiver: fix bug in determining kind of devices for 27Mz receivers
* device: add descriptor for LX7 mouse
* doc: update documentation for EX100 receiver
* doc: add description of Illuminated Keyboard with ID C318
* ui: ignore smooth scroll settings by default
* configuration: fix glitch when changing versions
* rules: add more debugging output for rules
* device: add descriptor for Illuminated Keyboard USB ID C318
* device: clean up pinging code
* device: put initial ping of direct-connected devices inside listener thread
* settings: read and check before write for range settings
* doc: update lightspeed receiver descriptions
* ui: mention compatability and non-connection in pairing window
* ui: improve determination of whether pairing possible
* receiver: count found devices when enumerating them and cut off when all found
* config: remove derived fields from config file when Solaar version changes
* device: allow device descriptors without name and codename
* ui: Filter and escape technical detail fields (#1953)
* settings: add setting for ADC power management
* docs: add description of G535 and N545
* device: correctly determine whether to ping with a long HID++ message
* device: add description for K470 keyboard from the MK470 combo (#1945)
* docs: add setting value for mouse gestures
* po: update German translation (#1940)
* Update French translation for 1.1.8 release
* tools: remove unnecessary clean.sh
* tools: remove non-working monitor.py
* ui: retry adding devices if permissions are wrong
* ui: better handling of IO errors at device creation
* ui: improve error pop-up for errors when creating devices
* ui: add KeyIsDown to list of conditions
* ui: allow editing of KeyIsDown conditions
* docs: document KeyIsDown rule condition
* rules: add KeyIsDown condition
* device: clean up device creation
* receiver: clean up receiver creation
* Sun Dec 18 2022 asnAATTcryptomilk.org- Update to version 1.1.8:
* release 1.1.8
* docs: add description of G903
* po: update Polish translation
* release 1.1.8rc3
* docs: document parameter for thumb wheel rule tests
* ui: allow editing of rules with parameters
* rules: add argument to thumb_wheel rules
* po: fix name of Serbian translation file
* Update Polish translation (#1920)
* release 1.1.8rc2
* release 1.1.8rc1
* solaar: improve handling of wheel notifications
* settings: only record changes of scroll wheel ratchet
* settings: device errors don\'t eliminiate setting
* device: more robust access to keyword exception fields
* device: add support for config change feature
* solaar: clean up gtk code
* docs: add known issue with other device controllers
* docs: update mouse gestures rules documentation
* dist: update flake8 version
* solaar: fix tyop in ping_all
* dist: get Ubuntu version from dpkg-parsechangelog
* dist: get Ubuntu version from dpkg-parsechangelog
* dist: get Ubuntu version from dpkg-parsechangelog
* dist: get Ubuntu version from dpkg-parsechangelog
* dist: get Ubuntu version from dpkg-parsechangelog
* misc: update .pre-commit-config.yaml (#1891)
* misc: update yapf version
* misc: update isort to current version
* dist: get Ubuntu version from dpkg-parsechangelog
* dist: print Ubuntu PPA environment
* dist: get commit from Ubuntu PPA directory name if no git information
* dist: update pre-commit versions and python version
* dist: use separate data files for version and commit information
* Update about.py (Spanish)
* dist: use git describe to get git version information
* dist: fix flake8 URL
* docs: update installation instructions
* dist: add 8-character commit hash to version information
* dist: update solaar.desktop (#1857)
* dist: get release in setup.py by reading lib/solaar/__init__.py
* docs: remove version number from doc/_config.yml
* Update es.po
* misc: Update solaar.desktop (#1847)
* po: Update es.po (#1846)
* docs: update documentation on several devices
* docs: update documentation on several devices
* receiver: clarify status of C542 receiver
* doc: update devices directory
* receiver: show name of disconnecting receiver or device in disconnect warning
* docs: add description of several devices
* Fixed typo in capcbilities.md
* ui: reduce standard size of rule editor window
* install: remove unnecessary dependency on typing_extensions
* Thu Nov 10 2022 Andreas Schneider - Add require to python-hid-parser
* Thu Nov 03 2022 asnAATTcryptomilk.org- Update to version 1.1.7:
* install: add depdendency on typing_extensions
* doc: add Wireless All-in-One Keyboard TK820
* release 1.1.7rc2
* relese 1.1.7rc2
* cli: don\'t defer saves in cli and don\'t require gtk in cli
* Update hr.po
* Update Croatian translation
* hidapi: be more permissive when recognizing HID++ report descriptors
* po: update Polish translation
* release 1.1.7rc1
* settings: set minimum ratchet speed to 1, not 0
* device: switch scroll ratcheting setting in response to scroll ratchet key notification
* settings: add setting to turn scroll ratchet on and off
* ui: eliminate visual glitch when updating range settings
* solaar: make hid-parser an optional dependency
* Tue Oct 25 2022 asnAATTcryptomilk.org- Update to version 1.1.6:
* release 1.1.6
* docs: mention that fn-swap is saved on some devices
* docs: add Dell-branded mouse and keyboard
* ui: only update remaining pairings after sucessful pairing
* listener: check for presence of status attribute when resuming
* Update Croatian translation
* po: update Polish translation
* Thu Sep 15 2022 asnAATTcryptomilk.org- Update to version 1.1.5:
* release 1.1.5
* docs: add several device descriptions
* device: add G213 Prodigy Gaming Keyboard
* po: Update Croatian translation (#1759)
* po: update zh_CN translation
* po: update Polish translation
* chore: clean a redundant space in a UI label
* release 1.1.5rc1
* po: Turkish translate completed (#1752)
* docs: move old device descriptions to new locations and fix up
* settings: increase minimum stopped time betweeen mouse movements
* rules: fix bug with non-recognized empty mouse movement
* docs: fix typos in Solaar options documentation
* ui: allow config panel to scroll
* doc: descriptions for K360 4004 and MX Master 4071
* doc: descriptions for Lightspeed Receiver C541 and G915 WIRELESS RGB Mechanical Gaming Keyboard 407E
* ui: change security tooltip for unencrypted wireless connections
* po: Norwegian Bokmal
* doc: add known issue for key presses and changing hosts
* docs: add known issue about diverted keys
* docs: state that the Solaar GUI should run continously
* cli: don\'t apply settings in solaar config
* settings: move rawXY patch to new code for both sliding dpi and mouse gestures
* ui: use device list in Active condition
* ui: add description of rule components to rule editor
* docs: add information on enhancement requests to add new devices
* settings: ignore first movement for mouse gestures when reprog controls version is 5 or more
* ui: add Active condition to rule editor
* docs: document Active rule condition
* rules: add rule condition to test whether a device is active
* docs: update ERGO M575 Trackball 4096 description
* docs: add Wireless Mobile Mouse MX Anywhere 2S 406A description
* cli: terminate iteration over receiver devices when all have been found
* rules: downgrade Set prolem messages from error to warning
* ui: log informational messages and above to a temporary file
* docs: add device information for ERGO M575 Trackball
* ui: don\'t produce warnings when editing rules in rule editor
* rules: save rules file even if there are no rules to save
* docs: device documentation for MX Keys Keyboard and Wireless Mouse Pebble M350
* device: get extended pairing information early and allow for unknown WPID
* receiver: return null values if no pairing information available
* receiver: use last_id as maximum device number not max_devices
* cli: show more registers in solaar probe
* docs: reflect change from json to yaml in capabilities documention
* cli: show features versions in solaar show (#1709)
* device: don\'t use field that may require communication with device in equality test
* device: fix exception when removing device not in instance list
* po: Use German word Gestentaste in translation
* docs: update device documentation for MX Keys Mini and MX Master 3S
* docs: update device directory documentation
* docs: remove superceeded device documentation files
* docs: update device documentation files
* docs: new conventions for device documentation files
* po: Added Serbian translation (#1687)
* device: add desccriptor for G935 headset
* device: add G502 Proteus Spectrum Optical Mouse
* device: keep track of feature versions
* po: update zh_TW translation (#1681)
* rules: require gtk 3.0
* rules: Fix circular import (#1673)
* rules: find devices using method in Device
* device: keep track of devices in list
* po: update zh_CN translation
* settings: convert old-style mouse gestures and dpi sliding settings to new style
* docs: document changed Smart Shift and Mouse Gestures processing
* settings: allow multiple keys for mouse gestures and dpi sliding
* Fix release date in io.github.pwr_solaar.solaar.metainfo.xml
* cli: explicitly save configuration at end of solaar config if no GUI running
* configuration: defer configuration file writes for up to 5 seconds
* device: use correct Solaar functions for unified and voltage battery functions
* settings: defensive check for missing keys array in mouse gestures setting
* device: compute approximate charge level for adc measurement feature
* device: fix bugs in battery notification processing
* ui: better presentation of battery information
* device: add support for ADC MEASUREMENT battery feature
* device: regularize and improve battery status gathering and reporting
* doc: add information on how to find divertable key names in solaar show output
* device: better warnings for feature call errors with reprogrammable key and gesture settings
* ui: increase entry size for ChoiceControlBig
* Mon Jul 04 2022 asnAATTcryptomilk.org- Update to version 1.1.4:
* release 1.1.4
* po: Update Croatian translation
* po: Update Croatian translation
* release 1.1.4rc2
* settings: handle unusual values for persistent remappable action
* settings: remove unused class variables
* device: fix no-output values for persistent key mappings
* doc: improve documentation on library needed for system tray integration
* ui: remove blank lines from system tray popup
* po: update Polish translation
* Mon May 09 2022 ecsos - Added python-dataclasses again. Without dataclasses solaar does not run under Leap. And python 3.6 is not deprecated in Leap 15.3 and 15.4. Suse support only python 3.6 as standard in Leap.
* Mon May 09 2022 Andreas Schneider - Drop python3-dataclasses which is only needed for Pyhton 3.6 and upstream doesn\'t support that python version anymore.
* Sat May 07 2022 ecsos - Fix needed dependencies.- Run spec-cleaner.
* Mon May 02 2022 Andreas Schneider - Update to version 1.1.3:
* Update documentation files
* Lower remove python 3.7 constructs and lower python dependency to 3.6
* Fix bug in xtest mouse scrolling
* Allow mouse gesture setting for non-mice, e.g., trackballs
* Print message when there is another Solaar process running
* Fix determination of whether to force read before writing boolean setting
* Add recent diversion features to default list in rules UI
* Add setting to divert hires scroll wheel
* Don\'t use device kind to determine how to handle notifications
* Update Polish, Russian, and zh_CN translations
* Remove pggettext so as to not require Python 3.8
* Remove Python 2 unicode support
* Store keys in configuration file as int instead of str
* Use yaml for configuration file instead of json.
* Remove process-dependent rules from built-in rules.
* Handle situation where GTK application cannot be set up in CLI.
* Remove obsolete upower signals.
* Appinfo/metadata fixes including using correct APP_ID.
* Fix bugs in solaar config.
* Add full set of mouse buttons in persistent remappable actions setting.
* Improve rule behaviour under Wayland and when Xtest or X11 not available.
* Fix up and document dependencies (evdev, Python, ...).
* Wed Mar 30 2022 Andreas Schneider - Add missing requirements- Use python macros in spec file
* Sun Mar 27 2022 Dirk Müller - update to 1.1.2:
* Update documentation on supported devices and translations
* Include evdev as a dependency
* Try to use uinput for fake input if XTest extension not available
* Add Nano receiver C542 for M190 mice
* Broaden range of HID++ Bluetooth devices
* Add setting to divert gestures
* Rule editor can edit all rule components
* Configuation via solaar config takes effect in Solaar UI if it is running
* Add setting to disable Onboard Profiles and decouple from Polling Rate setting
* Add setting for PERSISTENT_REMAPPABLE_ACTION, common keyboard and mouse cases only
* Split Test rule condition into Test and TestBytes and support in rule editor
* Fix bug in speed-change setting
* Support Backlight3 feature
* Ensure that settings are pushed in resume
* Update German, Polish, and zh_CN translations
* Determine device number for direct-connected devices from protocol
* fix bug in add and delete button actions in rule editor
* dispose of no-op notifications quickly
* add rule condition for checking device settings
* use local file for conversion from key names to keysyms
* get keyboard group and use to get correct keycodes (X11 only)
* improve how rules work under Wayland
* add settings for M-Key LEDs and MR-Key LED
* fix bug in unpacking M and MR key notification
* add G815 keyboard and MX518 mouse
* add new special keys for recent keyboards
* track M and MR keys for use in rules
* make sure that device is online when searching for devices in solaar show
* don\'t check for device kind in dpi sliding setting
* fix problem with devices that report 0 DPI
* handle missing divert-setting in action RW for settings
* add id property (unitId or serial) and don\'t use ? for unknown serial
* fix contains for NamedInts and eliminate use of has_element
* check for xtest and disable modifier checking if not available
* improve determination of gesture information
* add Set rules to rule GUI
* add gesture params to Set rules
* hide system tray when there are no devices to control
* add G733 headset, G9 mouse, G502 Hero mouse
* Use greyscale solaar icon in tray when using symbolic icons
* Fix bugs in solaar config
* Use classes for settings to hep with modularity
* Accept \'~\' and Toggle for toggling boolean settings in cli and rules
* handle errors when writing to devices
* refactor config_panel.py to use classes for widgets
* add rules action to set Solaar settings
* decrease amount of logging at each debug level
* don\'t stretch toggles in settings
* use key structure for key remapping setting
* optimize ReprogrammableKey implementation
* keep track of settings that are absent from device
* add G512 keyboard and G402 mouse
* reformat descriptors.py
* use feature numbers for reprogrammable key versions
* don\'t use new_from_icon_set in menu as it is deprecated
* Wed Dec 29 2021 Carsten Ziepke - Update to version 1.1.1
* Keep left pane in Solaar main window the same size
* Fix crash when checking a process condition when X11 not running
* Add version number to output of solaar show
* Fix crash when pinging a device with unknown protocol
* Display battery percentage estimates from battery voltage
* Add minimal support for Logitech PRO X Wireless Gaming Headset
* Push settings when device requests software reconfiguration
* Fix read for key/button diversion setting
* Add modalias information to Solaar metainfo
* Don\'t do on-screen notifications when devices are powered on
* Add setting to switch crown between smooth and ratchet scrolling
* Add write_prefix_bytes argument to Boolean validator
* Update Russian and Spanish translations
* New shell script tools to help determine capabilities of receivers
* Add special keys for MX Keys for Business and MX Keys Mini
* Improve tray menu ordering
* Add --tray-icon-size option to get around bugs in some tray implementations
* Sat Nov 27 2021 Andreas Schneider - Update to version 1.1.0
* https://github.com/pwr-Solaar/Solaar/blob/1.1.0/ChangeLog- Add missing dependency to python3-PyYAML - bso#1193123
* Mon Oct 25 2021 Andreas Schneider - Update to version 1.0.7
* https://github.com/pwr-Solaar/Solaar/blob/1.0.7/ChangeLog
* Sun Jun 06 2021 Dirk Müller - update to 1.0.6:
* Update sliding DPI to look for suitable keys
* Add mouse gestures that can trigger rules
* Complain if receivers do not support connection notification
* In polling rate setting, only modify onboard profiles when actually writing polling rate
* Add ability to ignore settings.
* Use symbols for receiver sub-registers
* Add support for wired G700
* Do not set attention icon
* Replace deprecated GTK stock menu icons
* Better handling of icons in tray and tray menus
* Receiver c52e does not unpair
* Match active WM_CLASS as well as active process name in rules
* Correctly set icon theme value when regular battery icons are not available
* Handle exception when device is not available when device is being added
* Perform initial activation of devices in listener threads
* Keep track of serial numbers in the configuration file
* Don\'t update settings for non-active devices
* Set the current host name if not stored on the device
* Add setting for SMART SHIFT ENHANCED feature
* Don\'t unnecessarily use long messages for HID++ 1.0 commands
* Correctly select choices in solaar config and use 1-origin addressing
* Add quirk for G915 TKL keyboard because its host mode inteferes with its Fn keys
* Show command outputs both saved and on-device settings
* Update documentation
* Fix bug in hidconsole
* Update French translation
* Wed Jun 02 2021 Christophe Giboudeaux - Fix the %doc files. README.md is a symlink to \'docs/index.md\'. Let\'s use this file directly.
* Sat Feb 27 2021 Andreas Schneider - Update to version 1.0.5
* Update documentation on devices forgetting settings.
* Improve help messages
* Fix bug in finding receiver to pair
* Solaar config command can set keyed settings.