Changelog for openmpt123-0.5.7-2.1.i586.rpm :

* Sat Mar 20 2021 Mia Herkt - Update to 0.5.7:
* [Sec] Possible null-pointer dereference read caused by a sequence of openmpt::module::read, openmpt::module::set_position_seconds with a position past the song end, and another openmpt::module::read call.
* IT: Instrument / sample panning was reset on note-off / fade commands.
* IMF: Set Finetune is now implemented correctly.
* Fixed excessive memory consumption with malformed files in various formats.
* Sun Mar 14 2021 Mia Herkt - Update to 0.5.6:
* AMS: Avoid allocating excessive amount of memory for compressed song message in malformed files.
* S3M: Some samples or OPL patches were imported with a too high sample rate if module was saved with Scream Tracker 3.
* Tue Feb 02 2021 Mia Herkt - Update to 0.5.5:
* [Bug] stb_vorbis: Fix decoding of Vorbis streams without comments which affected most Vorbis samples since stb_vorbis v1.20.
* openmpt::ext::interactive::set_pitch_factor wasn’t applied to OPL voices.
* OPL channel state (in particular current patch) is now updated when seeking.
* The FT2 tremolo quirk is now also applied to MOD files. FT2 just copied the quirky code from ProTracker!
* DMF: Preserve effects better in some situations where there is more than one effect in a pattern cell.
* DMF: Improve import of finetune effect with parameters larger than +/-15.
* Wed Dec 16 2020 Mia Herkt - Update to 0.5.4:
* AMS: An upper bound for uncompressed sample size is now established to avoid memory exhaustion from malformed files.
* DMF: Support early format beta versions (in particular versions 1-4).
* MED: Also use octave wrapping in 8-channel mode for MMD0/MMD1 modules.
* MED: If 8-channel mode is activated, ignore BPM mode.
* MED: Emulate tempo commands F01 and F02 quirk.
* MED: Tempo commands below 32 BPM were interpreted as tempo slides.
* IMF: Instrument sample mapping was off by one octave, notable in the guitar part of Astaris by Karsten Koch. Changes in 0.5.3:
* [Sec] Possible hang if a MED file claimed to contain 256 songs.
* [Bug] libopenmpt: openmpt::is_extension_supported2() exported symbol was missing (C++).
* [Bug] openmpt::module::set_position_seconds sometimes behaved as if the song end was reached when seeking into a pattern loop and in some other corner cases.
* Increase threshold for ignoring panning commands from 820 to 830.
* Subsong names now fall back to the first pattern’s name if empty.
* MO3: Avoid certain ModPlug hacks from being fixed up twice, which could lead to e.g. very narrow pan swing range for old OpenMPT IT files saved with a recent MO3 encoder version.
* MO3: Some files with corrupted envelope data could be rejected completely (normally libopenmpt should fix up the envelope data).
* MO3: Song metadata didn’t correctly identify MPTM as source format (it appeared as IT instead).
* STM: Change tempo computation to behave like Scream Tracker 2.3 instead of Scream Tracker 2.2, as the playback frequencies we use for sample playback are closer to those of Scream Tracker 2.3.
* PLM: Percentage offset (Mxx) was slightly off.
* WOW: Fix loading of several files and harden WOW detection. Changes in 0.5.2:
* PP20: The first few bytes of some files were not decompressed properly, making some files unplayable (depending on the original format). Changes in 0.5.1:
* [Bug] libopenmpt/libopenmpt.h failed to compile with LIBOPENMPT_NO_DEPRECATE defined.
* MPTM: Qxy now retriggers OPL notes if new compatibility flag is set in file.
* MPTM: Bring back old OPL note end-of-envelope behaviour for files made with OpenMPT 1.28.
* IT: Global volume slides with both nibbles set preferred the “slide up” nibble over the “slide down” nibble in old OpenMPT versions, unlike other slides. Such old files are now imported correctly again.
* IT: Fixed an edge case where, if the filter hit full cutoff / no resonance on the first tick of a row where a new delayed note would be triggered, the filter would be disabled even though it should stay active. Fixes trace.it by maddie.
* OXM: Some sample loops were not imported correctly.
* XM: Out-of-range arpeggio clamping behaviour broke in OpenMPT 1.23.05.00. The arpeggios in Binary World by Dakota now play correctly again.
* S3M: Support old-style sample pre-amp value in very early S3M files.
* S3M: Only force-enable fast slides for files ST 3.00. Previously, any S3M file made with an ST3 version older than 3.20 enabled them.
* S3M: Only apply volume and middle-C speed on instrument change if the new sample slot has sample data.
* MOD: Fix an infinite loop in GamerMan by MrGamer by playing non-ProTracker MODs more like FT2 would.
* M15: Improve tracker detection heuristics to never assume SoundTracker 2.0 if there is a huge number of Dxx commands, as that is a definite hint that they should be treated as volume slides. Fixes Monty On The Run by Master Blaster.
* MO3: Support OPL patches in MO3 files created from MPTM and S3M
* DBM: If a global pattern command would be lost because both effect commands in a cell would have to go into the regular effect column (e.g. a speed and a tempo command), the lost command is now attempted to be written into a different cell on the same row. Fixes “Party-Question V” by grogon.
* Sun Jun 07 2020 Dave Plater - Remove devel packages requirement on obsolete modplug
* Sun May 24 2020 Mia Herkt - Drop libmodpulg-pcfile.patch- Update to 0.5.0:
* [New] OggMod compressed FastTracker 2 XM (OXM) modules are now supported.
* [New] The emulated Amiga type when Amiga resampler emulation is enabled can now be selected via ctl render.resampler.emulate_amiga_type. Possible values are: \"auto\", \"a500\", \"a1200\", and an experimental option \"unfiltered\".
* [New] libopenmpt: New API openmpt::module::get_current_estimated_bpm() (C++), and openmpt_module_get_current_estimated_bpm() (C) which provides accurate beats per minute information for module formats with time signature and an educated guess based on speed and tempo for others.
* [New] libopenmpt: New type-aware ctl APIs that do not require memory allocations and are thus realtime-safe: openmpt::module::ctl_get_boolean(), openmpt::module::ctl_get_integer(), openmpt::module::ctl_get_floatingpoint(), openmpt::module::ctl_get_text(), openmpt::module::ctl_set_boolean(), openmpt::module::ctl_set_integer(), openmpt::module::ctl_set_floatingpoint() (C++), and openmpt_module_ctl_get_boolean(), openmpt_module_ctl_get_integer(), openmpt_module_ctl_get_floatingpoint(), openmpt_module_ctl_get_text(), openmpt_module_ctl_set_boolean(), openmpt_module_ctl_set_integer(), openmpt_module_ctl_set_floatingpoint() (C).
* [New] libopenmpt C++ New API openmpt::is_extension_supported2() which takes a std::string_view parameter instead of std::string.
* [New] libopenmpt C++: New API openmpt::module::module(std::vector data), openmpt::module::module(const std::byte
* data, std::size_t size), openmpt::module::module(const std::byte
* beg, const std::byte
* end).
* [New] libopenmpt C++: New API openmpt::probe_file_header(flags, const std::byte
* data, std::size_t size, filesize), openmpt::probe_file_header(flags, const std::byte
* data, std::size_t size).
* [New] libopenmpt_ext C++: New API openmpt::module_ext::module_ext(std::vector data), openmpt::module_ext::module_ext(const std::byte
* data, std::size_t size), openmpt::module_ext::module_ext(std::vector data), openmpt::module_ext::module_ext(const std::uint8_t
* data, std::size_t size).
* [Change] std::istream based file I/O has been speed up.
* [Change] Dependency on iconv on Linux has been removed.
* [Regression] libmodplug: The libmodplug emulation layer has been removed from the libopenmpt tree. Please use the separate libopenmpt-modplug package instead.
* [Regression] Support for building with C++11 or C++14 has been removed. C++17 is now required to build libopenmpt.
* [Regression] Support for client code using C++11 or C++ 14 has been removed. C++17 is now required to build libopenmpt client applications.
* [Regression] Support for GCC 4.8, 4.9, 5, 6 has been removed.
* [Regression] Support for Clang 3.6, 3.7, 3.8, 3.9, 4 has been removed.
* [Regression] Support for Emscripten versions older than 1.39.1 has been removed.
* [Regression] openmpt123: Support for SDL1 (but not SDL2) output has been removed.
* [Regression] openmpt123: Support for SDL2 older than 2.0.4 has been removed.
* [Regression] It is no longer possible to optionally use iconv for character set conversions.
* [Bug] openmpt123: openmpt123 now honors the current locale and outputs text appropriately.
* Greatly improved MED import. Synthesized instruments are still not supported but support was added for: Multisampled instruments, delta samples, more pattern commands, Hold and Decay, VSTi and MIDI output, multiple songs and many other small changes.
* Improved OPL channel allocation when more than 18 notes are active, so that channels that have completely faded out are prioritized over channels that have already been released but have not faded out yet.
* Interactively triggering an OPL instrument could cause the first pattern channel to no longer be played back correctly.
* Fix some inaccuracies in OPL emulator.
* Fix overflow of OPL amplification happening at a synth volume level of 510.
* End-of-sample pop reduction of surround channels was applied to front channels instead, causing a pop on the front channels instead of removing it on the back channels.
* IT: Disable retrigger with short notes quirk for modules saved with Chibi Tracker, as it does not implement that quirk.
* IT: Instrument and sample panning should not override channel panning for following notes.
* IT: SBx is now prioritized over Bxx commands that are to the left of it.
* IT: Duplicate Check Type “Sample” should only be applied if the instruments match, too.
* IT: Duplicate Check Type “Note” should compare pattern notes, but it was comparing the new pattern note against the old translated note.
* IT: Various fixes for envelope resetting.
* IT / S3M: When combining SBx and EEx effects, don’t skip the first row of the loop like in FastTracker 2.
* S3M: Empty pattern commands now affect effect memory as well.
* S3M: Offset beyond loop end wraps around to loop start like in Scream Tracker 3 + GUS (previously it just keep playing from the loop start, which is neither what GUS nor Sound Blaster drivers do).
* S3M: Notes cannot be retriggered after they have been cut.
* S3M: Fix portamento after note cut (fixes antediluvian_song.s3m).
* S3M / MOD: Previous note offset is no longer used for retriggered notes if there was no instrument number next to the Qxy effect.
* MOD: Sample swapping now also works if the sample that is being swapped from does not loop. Swapping to a non-looped sample now stops playback once the swapped-from sample reaches its (loop) end.
* MOD: Fix early song ending due to ProTracker pattern jump quirk (EEx + Dxx on same row) if infinite looping is disabled. Fixes Haunted Tracks.mod by Triace.
* MOD: Previous note offset is no longer used for retriggered notes if there was no instrument number next to the E9x effect.
* MOD: Vibrato type “ramp down” was upside down.
* XM: If a file contains patterns longer than 1024 rows, they are now clamped to 1024 rows instead of 64 rows.
* XM: Do not reset note-off status on portamento if there is no instrument number.
* Mon Apr 13 2020 Mia Herkt - Update to 0.4.12:
* IT: Vibrato was too fast in Old Effects mode since libopenmpt 0.3.
* XM: Treat 8bitbubsy’s FT2 clone exactly like Fasttracker 2 with respect to compatibility and playback flags. For example, FT2 Pan Law was not applied.
* DMF: Some files had a wrong tempo since libopenmpt 0.2.5705-beta15.
* Thu Jan 30 2020 Tomáš Chvátal - Update to 0.4.11:
* The “date” metadata could contain a bogus date for some older IT files.
* Do not apply global volume ramping from initial global volume when seeking.
* MTM: Sample loop length was off by one.
* PSM: Sample loop length was off by one in most files.
* MOD: Fix initial instrument change with no note playing.
* Thu Oct 03 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.9 bsc#1153102 CVE-2019-17113
* [Sec] libmodplug: C API: Limit the length of strings copied to the output buffer of ModPlug_InstrumentName() and ModPlug_SampleName() to 32 bytes (including terminating null) as is done by original libmodplug. This avoids potential buffer overflows in software relying on this limit instead of querying the required buffer size beforehand. libopenmpt can return strings longer than 32 bytes here beacuse the internal limit of 32 bytes applies to strings encoded in arbitrary character encodings but the API returns them converted to UTF-8, which can be longer. (reported by Antonio Morales Maldonado of Semmle Security Research Team) (r12129)
* [Sec] libmodplug: C++ API: Do not return 0 in CSoundFile::GetSampleName() and CSoundFile::GetInstrumentName() when a null output pointer is provided. This behaviour differed from libmodplug and made it impossible to determine the required buffer size. (r12130)
* Tue Oct 01 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.8:
* [Sec] Possible crash due to out-of-bounds read when playing an OPL note with active filter in S3M or MPTM files (r12118).- Update to version 0.4.7:
* J2B: Ignore notes with non-existing instrument (fixes Ending.j2b)
* Sun Aug 11 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.6:
* Detect IT files unpacked with early UNMO3 versions.
* Mon May 27 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.5:
* [Sec] Possible crash during playback due out-of-bounds read in XM and MT2 files
* Breaking out of a sustain loop through Note-Off sometimes didn’t continue in the regular sample loop
* Seeking did not stop notes playing with XM Key Off (Kxx) effect
* Sun Apr 07 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.4:
* [Bug] Channel VU meters were swapped.
* Startrekker: Clamp speed to 31 ticks per row.
* MTM: Ignore unused Exy commands on import. Command E5x (Set Finetune) is now applied correctly.
* MOD: Sample swapping was always enabled since it has been separated from the ProTracker 1/2 compatibility flag. Now it is always enabled for Amiga-style modules and otherwise the old heuristic is used again.
* Mon Feb 11 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.3:
* [Sec] Possible crash due to null-pointer access when doing a portamento from an OPL instrument to an empty instrument note map slot.
* IT: Various fixes for note-off + instrument number in Old Effects mode.
* MO3: Import IT row highlights as written by MO3 2.4.1.2 or newer. Required for modules using modern tempo mode.
* Tue Jan 22 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.2 bsc#1143582 CVE-2019-14382 bsc#1143584 CVE-2019-14383:
* [Sec] DSM: Assertion failure during file parsing with debug STLs.
* [Sec] J2B: Assertion failure during file parsing with debug STLs.
* S3M: Allow volume change of OPL instruments after Note Cut.
* Sun Jan 06 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.1:
* [Bug] libmodplug: Public symbols of the C++ API had visibility=hidden set on non-MSVC systems, which made them not publicly accessible.
* MO3: Apply playback changes based on “ModPlug-made” header flag- Drop libmodplug-no-exported-cpp-api-quickfix-v1.patch
* Tue Jan 01 2019 antoine.belvireAATTopensuse.org- Add libmodplug-no-exported-cpp-api-quickfix-v1.patch: Add missing CSoundFile compat API (bug #1180).
* Sun Dec 23 2018 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.0 bsc#1143581 CVE-2018-20860:
* [New] libopenmpt now includes emulation of the OPL chip and thus plays OPL instruments in S3M, C67 and MPTM files. OPL chip emulation volume can be changed with the new ctl render.opl.volume_factor.
* [New] libopenmpt now supports CDFM / Composer 670 module files.
* [New] libopenmpt: New ctl play.at_end can be used to change what happens when the song end is reached: - “fadeout”: Fades the module out for a short while. Subsequent reads after the fadeout will return 0 rendered frames. This is the default and identical to the behaviour in previous libopenmpt versions. - “continue”: Returns 0 rendered frames when the song end is reached. Subsequent reads will continue playing from the song start or loop start. This can be used for custom loop logic, such as loop auto-detection and longer fadeouts. - “stop”: Returns 0 rendered frames when the song end is reached. Subsequent reads will return 0 rendered frames.
* [New] Add new metadata fields \"originaltype\" and \"originaltype_long\" which allow more clearly reflecting what is going on with converted formats like MO3 and GDM.
* [Change] openmpt123: openmpt123 now rejects --output-type in - -ui and --batch modes and also rejects --output in --render mode. These combinations of options really made no sense and were rather confusing.
* [Regression] Support for libmpg123 older than 1.14.0 has been removed.
* [Regression] libmodplug: Support for emulating libmodplug 0.8.7 API/ABI has been removed.
* [Bug] xmp-openmpt: Sample rate and number of output channels were not applied correctly when using per-file settings.
* [Bug] Internal mixer state was not initialized properly when initially rendering in 44100kHz stereo format.
* [Bug] openmpt123: Prevent libsdl2 and libsdl from being enabled at the same time because they conflict with each other.
* [Bug] libmodplug: Setting SNDMIX_NORESAMPLING in the C++ API always resulted in linear interpolation instead of nearest neighbour
* IT: In Compatible Gxx mode, allow sample changes next to a tone portamento effect if a previous sample has already stopped playing.
* IT: Fix broken volume envelopes with negative values as found in breakdwn.it by Elysis.
* MOD: Slides and delayed notes are executed on every repetition of a row with row delay (fixes “ode to protracker”).
* XM: If the sustain point of the panning envelope is reached before key-off, it is never released.
* XM: Do not default recall volume / panning for delayed instrument-less notes
* XM :E60 loop bug was not considered in song length calucation.
* S3M: Notes without instrument number use previous note’s sample offset.
* Tighten M15 and MOD file rejection heuristics.
* J2B: Ignore frequency limits from file header. Fixes Medivo.j2b, broken since libopenmpt-0.2.6401-beta17.
* STM: More accurate tempo calculation.
* STM: Better support for early format revisions (no such files have been found in the wild, though).
* STM: Last character of sample name was missing.
* SFX: Work around bad conversions of the “Operation Stealth” soundtrack by turning pattern breaks into note stops.
* IMF: Filter cutoff was upside down and the cutoff range was too small.
* ParamEq plugin center frequency was not limited correctly.
* Keep track of active SFx macro during seeking.
* The “note cut” duplicate note action did not volume-ramp the previously playing sample.
* A song starting with non-existing patterns could not be played.
* DSM: Support restart position and 16-bit samples.
* DTM: Import global volume.
* MOD: Support notes in octave 2, like in FastTracker 2 (fixes DOPE.MOD).
* Do not apply Amiga playback heuristics to MOD files that have clearly been written with a PC tracker.
* MPTM: More logical release node behaviour.
* Subsong search is now less thorough. It could previously find many subsongs that are technically correct (unplayed rows at the beginning of patterns that have been jumped over due to pattern breaks), but so far no real-world module that would require such a thorough subsong detection was found. The old mechanism caused way more false positives than intended with real-world modules, though.
* Restrict the unpacked size of compressed DMF, IT, MDL and MO3 samples to avoid huge allocations with malformed small files.
* Mon Oct 22 2018 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.3.13:
* [Sec] Crash with malformed MED files.
* Transposed samples in AMF ASYLUM modules were not played correctly.
* Notes triggered by libopenmpt_ext play_note could be played with a panbrello effect if the same virtual channel was previously used with panbrello.
* Clicks when stopping channels that didn’t end at zero volume.
* XM: Do not import non-standard commands N and M as channel volume commands.
* Mon Sep 24 2018 9+suseAATTcirno.systems- Update to version 0.3.12:
* [Bug] libmodplug: Setting SNDMIX_NORESAMPLING in the C++ API always resulted in linear interpolation instead of nearest neighbour.
* libopenmpt now compiles without warnings with GCC 8.
* Jump commands on the same row as the end of a pattern loop covering the restart position of the module could cause the module to loop even when looping was disabled.
* MO3: Reject overly long MP3 and Vorbis samples.
* play_note from the libopenmpt_ext interface sometimes silenced the start of a triggered sample.
* Sat Jul 28 2018 9+suseAATTcirno.systems- Update to version 0.3.11 bsc#1143578 CVE-2018-20861:
* [Sec] Crash with some malformed custom tunings in MPTM files
* Channels whose volume envelope was playing at volume 0 while being moved to a NNA background channel were cut off completely since libopenmpt 0.3.8.
* AMF (ASYLUM): Convert 7-bit panning to 8-bit panning for playback- Update to version 0.3.10:
* [Bug] Internal mixer state was not initialized properly when initially rendering in 44100kHz stereo format.
* [Bug] AMF: Undefined behaviour in loader code could lead to files playing silent.
* Switching between instruments with portamento did not update the NNA settings for the new instrument.
* FAR: Properly import volume commands.
* [Sec] Possible write near address 0 in out-of-memory situations when reading AMS files.
* [Bug] openmpt123: Fixed build failure in C++17 due to use of removed feature std::random_shuffle.
* STM: Having both Bxx and Cxx commands in a pattern imported the Bxx command incorrectly.
* STM: Last character of sample name was missing.
* Speed up reading of truncated ULT files.
* ULT: Portamento import was sometimes broken.
* The resonant filter was sometimes unstable when combining low-volume samples, low cutoff and high mixing rates.
* Mon May 28 2018 tchvatalAATTsuse.com- Up to 0.3.9:
* [Sec] Possible write near address 0 in out-of-memory situations when reading AMS files (bsc#1095644 CVE-2018-11710)
* [Bug] openmpt123: Fixed build failure in C++17 due to use of removed feature std::random_shuffle.
* STM: Having both Bxx and Cxx commands in a pattern imported the Bxx command incorrectly.
* STM: Last character of sample name was missing.
* Speed up reading of truncated ULT files.
* ULT: Portamento import was sometimes broken.
* The resonant filter was sometimes unstable when combining low-volume samples, low cutoff and high mixing rates.
* Thu Apr 19 2018 9+suseAATTcirno.systems- Update to 0.3.8
* [Sec] Possible out-of-bounds memory read with IT / ITP / MO3 files containing pattern loops (CVE-2018-10017, bsc#1089080)
* Keep track of active SFx macro during seeking.
* The \"note cut\" duplicate note action did not volume-ramp the previously playing sample.
* A song starting with non-existing patterns could not be played.
* DSM: Support restart position and 16-bit samples.
* DTM: Import global volume.
* Wed Mar 21 2018 tchvatalAATTsuse.com- Version update to 0.3.7:
* Various speedup improvements and features all around
* Fuzzying fixes
* Fri Jul 14 2017 tchvatalAATTsuse.com- Version update to 0.2.8461-beta26 bsc#1048666 CVE-2017-11311:
* various small fixes and seciruity tweaks
* Mon Jun 19 2017 zaitorAATTopensuse.org- Add libopenmpt0 and libopenmpt_modplug1 to baselibs.conf too.
* Wed Jun 14 2017 olafAATTaepfle.de- baselibs.conf for libmodplug.so.1
* Mon May 22 2017 tchvatalAATTsuse.com- Add patch fixing issue bsc#1040149 wrong includedir propagation:
* libmodpulg-pcfile.patch
* Mon May 22 2017 tchvatalAATTsuse.com- Version update to 0.2.8043-beta23
* foo_openmpt: Interpolation filter and volume ramping settings were confused in previous versions. This version resets both to the defaults.- Make mpg123 on by default
* Mon Mar 27 2017 tchvatalAATTsuse.com- Update to 0.2.7774-beta22- Make mpg123 conditional and disabled for now by default- Fix the Factory build with the new rpm
* Sun Feb 19 2017 jengelhAATTinai.de- Update summaries and descriptions.- Enable the SDL2 driver as an option, as the portaudio driver appears to hang with ALSA (and not everyone runs Pulseaudio).
* Sun Feb 19 2017 tchvatalAATTsuse.com- Initial package containing libopenmod more updated secure alternative bsc#1022032