Changelog for yast2-network-4.4.18-3.1.noarch.rpm :

* Thu Jun 17 2021 Knut Anderssen - Support \'boot\' and \'on\' as aliases for the \'auto\' startmode (bsc#1186910)- 4.4.18
* Thu Jun 17 2021 Knut Anderssen - Fallback to NetworkManager if wicked is the backend selected but it is not installed at the end of the installation (bsc#1187423)- 4.4.17
* Tue Jun 15 2021 Imobach Gonzalez Sosa - Fix the Comment entry in the desktop file so the tooltip in the control center is properly translated (bsc#1187270).- 4.4.16
* Tue Jun 08 2021 Knut Anderssen - Use the linuxrc proxy settings for the HTTPS and FTP proxies (bsc#1185016)- 4.4.15
* Fri Jun 04 2021 Knut Anderssen - Adopt the new YaST2::Equatable mixin in order to fix possible errors when comparing objects (related to bsc#1186082)- 4.4.14
* Mon May 31 2021 Michal Filka - bnc#1185524 - do not crash at the end of installation when storing wifi configuration for NetworkManager at the target- 4.4.13
* Fri May 28 2021 Knut Anderssen - Allow to modify the network IP forwarding configuration defining the defaults in the control file (bsc#1186280)- 4.4.12
* Mon May 24 2021 Knut Anderssen - Fix error when determining the removed interfaces in order to remove their associated routes too (bsc#1186082)- 4.4.11
* Wed May 12 2021 Knut Anderssen - Write IP addresses in order preventing an alias to set the primary IP address (bsc#1185967)- 4.4.10
* Wed May 05 2021 Knut Anderssen - Allow the user to disable the network service during installation or autoinstallation selecting a \'none\' backend (bsc#1183886)- 4.4.9
* Wed Apr 28 2021 Knut Anderssen - Omit hidden networks from the list of wireless networks to be selected preventing the dialog to crash (bsc#1185372)- 4.4.8
* Tue Apr 27 2021 Michal Filka - bsc#1185338 - Dropped LanItems, replaced by network-ng- 4.4.7
* Thu Apr 22 2021 Imobach Gonzalez Sosa - Do not crash when the BOOTPROTO or STARTMODE are missing or invalid (bsc#1181295).- 4.4.6
* Thu Apr 22 2021 Knut Anderssen - bsc#1185106 - Initialize correctly the netmask when using the static bootproto without an IP address defined. - Fix MTU write when using wicked.
* Thu Apr 22 2021 Knut Anderssen - Do not crash when modifying a virtual interface and checking if it is hotplug (bsc#1184623, bsc#1185106)- 4.4.5
* Wed Apr 14 2021 Knut Anderssen - Do not require a MAC address when activating a qeth device with layer2 support (bsc#1184474).- 4.4.4
* Tue Apr 13 2021 Knut Anderssen - Do not crash when checking if an interface is a hotplug one and it is not present (bsc#1184623)- 4.4.3
* Fri Apr 09 2021 Knut Anderssen - bsc#1181956 - Omit empty values or the \'0.0.0.0\' IPADDR when writing ifcfg files. - Do not write empty ifroute files.- 4.4.2
* Thu Apr 08 2021 Imobach Gonzalez Sosa - Display the network configuration in the installation summary screen even if NetworkManager is the selected backend (bsc#1181354).- 4.4.1
* Wed Apr 07 2021 Imobach Gonzalez Sosa - Write DNS servers to NetworkManager connection files when using a static configuration (bsc#1181701).- 4.4.0
* Tue Apr 06 2021 Michal Filka - Drop isCurrentDHCP and isCurrentHotplug methods from LanItems.
* Mon Apr 05 2021 David Diaz - Do not show the \"Abort\" button when the inst_lan client is called from another installation step (bsc#1183586).
* Mon Mar 29 2021 Imobach Gonzalez Sosa - Use the ESSID to name the NetworkManager configuration files for wireless networks (bsc#1183733).- 4.3.63
* Thu Mar 18 2021 Knut Anderssen - AutoYaST: Write NetworkManager configuration according to the profile (bsc#1181701)- 4.3.62
* Wed Mar 17 2021 Knut Anderssen - Always provide the layer2 argument when activating a qeth device (bsc#1183639).- 4.3.61
* Wed Mar 17 2021 Knut Anderssen - NetworkManager: Added support to write bridge and bonding configurations (bsc#1181701)- 4.3.60
* Mon Mar 15 2021 Knut Anderssen - AutoYaST: configure but not apply the network configuration at the end of the 1st stage (bsc#1180535).- 4.3.59
* Fri Mar 12 2021 David Diaz - Add more space before the \"Name Servers and Domain Search List\" frame (related to bsc#1183306).- 4.3.58
* Fri Mar 12 2021 Knut Anderssen - Fix the VLAN interface renaming when suggested by a VLAN ID change (bsc#1183357)- 4.3.57
* Thu Mar 11 2021 Imobach Gonzalez Sosa - AutoYaST: allow the interfaces list in the profile to be empty (bsc#1183257).- 4.3.56
* Thu Mar 11 2021 Michal Filka - bnc#1180085 - fixed proposing wpa_supplicant - adapted to use new network-ng backend.- dropped some old pieces of code- 4.3.55
* Fri Mar 05 2021 Ladislav Slezák - Define the network configuration buttons for the installer console (related to jsc#PM-1895, jsc#SLE-16263)- 4.3.54
* Thu Mar 04 2021 Imobach Gonzalez Sosa - Do not consider proposing \'nfsroot\' as startmode when running on installation (bsc#1182818).- 4.3.53
* Wed Mar 03 2021 Knut Anderssen - Do not filter ethernet cards when configuring a bond in s390 (bsc#1182911).- Only propose a 1492 MTU size when configuring an LCS interface.- 4.3.52
* Tue Mar 02 2021 Imobach Gonzalez Sosa - Support both \'bridge_forwarddelay\' and \'bridge_forward_delay\'. The latter takes precedence (bsc#1180944).- 4.3.51
* Fri Feb 26 2021 Imobach Gonzalez Sosa - Improve wireless devices configuration UX (bsc#1177834): - Reorganize the widgets, to make the UI easier to understand. - Add a list of wireless networks which displays additional information like Mode, Channel, Rate, Signal and Security method. - Pre-select the authentication method depending on the selected network.- Fix initialization of the \"AP ScanMode\" field.- 4.3.50
* Mon Feb 22 2021 Knut Anderssen - Added AutoYaST interfaces section errors reporting (bsc#1174353, bsc#1178107).- 4.3.49
* Mon Feb 22 2021 Knut Anderssen - Improve the AutoYaST interfaces reader handling better the IP Addresses configuration. (bsc#1174353, bsc#1178107)- 4.3.48
* Fri Feb 19 2021 Ancor Gonzalez Sosa - Adapted unit test to recent changes in Yast::Report (related to bsc#1179893).- 4.3.47
* Wed Feb 10 2021 Knut Anderssen - Allow to disable the proposal of the bridge network configuration for virtualization in the installation summary or by the new \'virt_bridge_proposal\' AutoYaST option (bsc#1178603)- 4.3.46
* Tue Feb 09 2021 Knut Anderssen - Fix for not present interfaces when deciding whether the \"Scan Network\" button should be disabled or not during a wireless configuration (bsc#1177834).- 4.3.45
* Thu Feb 04 2021 Knut Anderssen - Cache the hardware netcards information in order to speed up the access (bsc#1180702)- 4.3.44
* Mon Feb 01 2021 Knut Anderssen - Added lladdr attribute to the interface section in the networking schema and honors it when importing the config (bsc#1179876)- 4.3.43
* Fri Jan 29 2021 Knut Anderssen - Improved the NetworkManager wireless configuration writers adding support for writing WPA-EAP and open WEP authentication modes.- 4.3.42
* Tue Jan 26 2021 Imobach Gonzalez Sosa - Fixes some usability issues (bsc#1177834): - Disable \"Edit\" and \"Delete\" buttons when no interfaces are detected. - Disable the \"Scan Network\" button when the interface does not exist.
* Fri Jan 22 2021 Knut Anderssen - Suggest to modify the VLAN interface name when the VLAN ID is modified (bsc#1174363)- 4.3.41
* Fri Jan 22 2021 Knut Anderssen - Cache the online status of s390 group devices speeding up the population of the devices overview table (bsc#1180702)- 4.3.40
* Fri Jan 22 2021 Knut Anderssen - Added basic support for writing the network configuration to the NetworkManager backend (bsc#1180716)- 4.3.39
* Mon Jan 11 2021 Knut Anderssen - Fix network configuration progress bar steps (bsc#1180702)- 4.3.38
* Wed Dec 23 2020 Knut Anderssen - Improve additional addresses validation (bsc#1174766)- 4.3.37
* Mon Dec 21 2020 Knut Anderssen - When the static hostname is modified, propose the hostname to be used by the affected connection (bsc#1174431)- 4.3.36
* Wed Dec 16 2020 Knut Anderssen - Fix prefix length assignation when the alias netmask uses dot notation (bsc#1174766).- 4.3.35
* Mon Dec 14 2020 Knut Anderssen - Write also connections in case that the hostname mapped to a connection primary IP address is changed through the DNS standalone client (bsc#1174431)- 4.3.34
* Mon Dec 14 2020 Knut Anderssen - Allow to modify the hostname mapped to a connection primary IP address when the associated hostname is modified (bsc#1174431)- 4.3.33
* Thu Dec 10 2020 Knut Anderssen - Fix bonding slaves sorting (bsc#1178950)- 4.3.32
* Wed Dec 09 2020 Knut Anderssen - Clean the ifcfg file cached data before the connection configuration changes are written (bsc#1178950)- 4.3.31
* Wed Nov 25 2020 Knut Anderssen - Do not crash when trying to replace an /etc/hosts alias using the current static hostname and it is not set (bsc#1179178)- 4.3.30
* Mon Nov 23 2020 Knut Anderssen - Do not show a warn message when modifying a bonding configuration and all the slaves are already configured with BOOTPROTO=\'none\' (bsc#1178950)- 4.3.29
* Fri Nov 20 2020 Knut Anderssen - Fixed detection of connection configuration changes (bsc#1178950)- 4.3.28
* Fri Nov 20 2020 Michal Filka - bnc#1175360 - more robust AY profile parser. Do not crash with internal error on unknown node in interfaces section - support for static configurations without ip address- bnc#1175206 - support for defined default when missing bootproto in AY
* Tue Oct 20 2020 Josef Reidinger - fix crash when hostname file missing (bsc#1177904)- 4.3.27
* Wed Oct 07 2020 Knut Anderssen - Write hostname changes when modified through the \'dns\' client (bsc#1177191).- 4.3.26
* Mon Oct 05 2020 Knut Anderssen - Modified the way the current hostnames are (static & transient) read and write (bsc#1173915)- 4.3.25
* Mon Sep 28 2020 Knut Anderssen - Write the virtualization network configuration properly during an autoinstallation (bsc#1177025)- 4.3.24
* Thu Sep 24 2020 Knut Anderssen - Fixed initialization of the bridge STP configuration (bsc#1176820)- 4.3.23
* Mon Sep 21 2020 Ladislav Slezák - Fixed false error in the y2log (bsc#1176653)- 4.3.22
* Mon Sep 21 2020 Knut Anderssen - Fix connection hostname initialization (bsc#1175579)- 4.3.21
* Tue Sep 15 2020 Knut Anderssen - Infer the vlan_id from the interface file name when the attribute is not declared explicitly (bsc#1176575)- 4.3.20
* Thu Sep 10 2020 Knut Anderssen - When proposing the virtualization network configuration, force a read of the current configuration in case that it is not present (bsc#1176313)- 4.3.19
* Tue Sep 08 2020 schubiAATTsuse.de- Using \":\" in the autoyast(...) supplements (bsc#1146494).- 4.3.18
* Wed Aug 26 2020 Imobach Gonzalez Sosa - Unify profile element paths (bsc#1175680).- 4.3.17
* Tue Aug 11 2020 schubiAATTsuse.de- AutoYaST: Added supplements: autoyast(host,networking,remote) into the spec file in order to install this packages if the section has been defined in the AY configuration file (bsc#1146494).- 4.3.16
* Wed Jul 29 2020 Imobach Gonzalez Sosa - AutoYaST: do not crash when the section is present (bsc#1174643).- 4.3.15
* Tue Jul 28 2020 Knut Anderssen - Do not crash when configuring an IPv6 route through AutoYaST (bsc#1174353)- 4.3.14
* Thu Jul 16 2020 Knut Anderssen - Permit to write networking config changes without touching the service and other components like the firewall (bsc#1173298)- Permit dot characters in the hostname allowing to specify it as a FQDN (bsc#1173298)- 4.3.13
* Wed Jul 15 2020 Josef Reidinger - Do not use Profile.current (bsc#1174173)- 4.3.12
* Wed Jul 01 2020 Knut Anderssen - Do not remove automatically aliases from /etc/hosts during an autoinstallation (bsc#1173213)- Parse correctly udev rules keys using underscores (bsc#1167256)- 4.3.11
* Fri Jun 26 2020 Knut Anderssen - AutoYaST schema: add the setup_before_proposal element to the schema (bsc#1171922)- 4.3.10
* Wed Jun 24 2020 Josef Reidinger - Do not export network when not requested (bsc#1172552)- 4.3.9
* Fri Jun 19 2020 Knut Anderssen - Do not export any settings when NetworkManager is the network backend (bsc#1172822).- 4.3.8
* Fri Jun 19 2020 Martin Vidner - Save inst-sys memory by ending ag_udev_persistent after use (bsc#1172139).- 4.3.7
* Mon Jun 15 2020 Imobach Gonzalez Sosa - Do not export interfaces section when there are no aliases to export (bsc#1172922).- 4.3.6
* Thu Jun 11 2020 Knut Anderssen - Try to install the wireless-tools package when the package is not installed and the wifi networks are scanned (bsc#1168479)- 4.3.5
* Wed Jun 10 2020 José Iván López González - Avoid error when accessing to Bond Slaves in s390 (bsc#1172444).- 4.3.4
* Mon Jun 08 2020 Knut Anderssen - AutoYaST: Udev rules are written or copied to the target system properly when defined in the profile (bsc#1169663).- AutoYaST: Fixed the copy or merge of the linuxrc interfaces configuration when the installation network configuration is selected to be kept.- 4.3.3
* Wed May 20 2020 schubiAATTsuse.de- AutoYaST: Cleanup/improve issue handling (bsc#1171335).- 4.3.2
* Wed May 20 2020 Knut Anderssen - AutoYaST: Adapted the module to handle a complete network configuration during the first stage (bsc#1171922)- 4.3.1
* Tue May 12 2020 Josef Reidinger - Autoyast schema: Allow optional types for string and map objects (bsc#1170886)- 4.3.0
* Thu Apr 16 2020 Knut Anderssen - Do not try to install kernel packages anymore since ISDN support was already dropped which was the most common use case. Removed also hardware methods used mainly for ISDN config. (bsc#1151187)- 4.2.66
* Thu Apr 02 2020 Imobach Gonzalez Sosa - AutoYaST: Do not try to activate network devices that are already active in S390 systems (bsc#1163149). Related to jsc#SLE-7396.- AutoYaST: Allow to use spaces or colons to separate channel IDs in the \"chanids\" element.- 4.2.65
* Fri Mar 27 2020 Knut Anderssen - Refresh the current system cached network configuration with the one written avoiding inconsistencies during installation (bsc#1162987)- 4.2.64
* Thu Mar 19 2020 Knut Anderssen - AutoYaST: do not crash when defined dns section whitout hostname (bsc#1166953)- AutoYaST: handle the dhcp_hostname option in the dns section correctly- 4.2.63
* Wed Mar 18 2020 Knut Anderssen - Do a reload of configured interfaces when writing the configuration during a ssh or vnc installation (bsc#1166287)- 4.2.62
* Tue Mar 10 2020 Josef Reidinger - Store ip forwarding set during installation to target system (bsc#1159295)- 4.2.61
* Mon Mar 02 2020 Michal Filka - bsc#1164506 - fixed setting hostname in installer- bsc#1164587 - fixed setting hostname according to AY profile- 4.2.60
* Mon Mar 02 2020 Knut Anderssen - Do not modify interface name when enslaving it (bsc#1165463)- 4.2.59
* Thu Feb 27 2020 Knut Anderssen - Do not crash when running the network configuration client if the config has not been read by a previous client (bsc#1101514)- 4.2.58
* Tue Feb 25 2020 schubiAATTsuse.de- Using SysctlConfig class: Handle sysctl entries in different directories (bsc#1151649).- 4.2.57
* Fri Feb 21 2020 Knut Anderssen - Do not crash when checking if a given \'host\' is local or not (bsc#1163305)- 4.2.56
* Wed Feb 19 2020 Imobach Gonzalez Sosa - Add a class to represent NTP servers (jsc#SLE-7188).- 4.2.55
* Wed Feb 19 2020 Knut Anderssen - Do not crash with an exception when editing the hardware configuration of a new unplugged connection (bsc#1162679)
* Fri Feb 07 2020 Michal Filka - bsc#1162271 - fixed validation of hostname- 4.2.54
* Fri Feb 07 2020 Knut Anderssen - Fix the installation proposal text reflecting the network configuration changes (bsc#1162796)- 4.2.53
* Thu Feb 06 2020 Knut Anderssen - Prevent assignation of values not defined in the AutoYaST profile when reading the interfaces section (bsc#1162671)- 4.2.52
* Tue Feb 04 2020 Knut Anderssen - Do not break when reading interface config files with trailing spaces (bsc#1161300)- 4.2.51
* Mon Feb 03 2020 Knut Anderssen - Fix connection configuration summary when using a remote IP address (bsc#1162483)- 4.2.50
* Fri Jan 31 2020 Knut Anderssen - Do not fail when listing the s390 group devices of a given type and no one is present (bsc#1160997)- 4.2.49
* Thu Jan 30 2020 Knut Anderssen - Bring back the s390 group device activation dialog when editing an offline s390 group device (bsc#1160997)- 4.2.48
* Thu Jan 23 2020 Imobach Gonzalez Sosa - Do not try to read an ifcfg-
* file that does not exist (bsc#1161234).
* Wed Jan 22 2020 Ancor Gonzalez Sosa - Do not crash if install.inf contains an IP address that cannot be resolved to a name (bsc#1161217)- 4.2.47
* Tue Jan 21 2020 Knut Anderssen - bsc#1156986 - Fix crash when logging that an interface is not connected or is not bridgeable when proposing the virtualization config.- 4.2.46
* Wed Jan 15 2020 Knut Anderssen - bsc#1158025 - When touching existent udev rules, modify only the parts that are relevant or have changed. - When the hardware is read, use the parent_bus_id as the busid for virtio netcards.- 4.2.45
* Wed Jan 15 2020 Knut Anderssen - bsc#1156106 - Fixed the initialization of DNS.dhcp_hostname by the inst_setup_dhcp client- 4.2.44
* Mon Jan 06 2020 Martin Vidner - Add a sanity test for CLI error code reporting (bsc#1144351)- 4.2.43
* Fri Jan 03 2020 Michal Filka - bnc#1159970 - suppport for reading / writing MTU- 4.2.42
* Thu Jan 02 2020 Michal Filka - bnc#1153198, fate#319639 - fixed internal error caused by incompatibility between new and old DNS / Hostname handling code.- 4.2.41
* Fri Dec 27 2019 Josef Reidinger - read properly old wireless auth modes and use new ones instead (bsc#1159160)- 4.2.40
* Mon Dec 23 2019 Michal Filka - bnc#1153198, fate#319639 - improved previous fix - exception handling- 4.2.39
* Tue Dec 17 2019 Knut Andersse - bsc#1156986 - Fixed the creation of network configuration for virtualization- 4.2.38
* Tue Dec 17 2019 Michal Filka - bnc#1153198, fate#319639 improved previous fix together with some cleanup- 4.2.37
* Mon Dec 16 2019 Knut Anderssen - Centered and added title to the add interface dialog (jsc#SLE-7753)- 4.2.36
* Wed Dec 04 2019 Michal Filka - bnc#1158122 - fixed internal error when incorrectly querying for hostname in AY\'s second stage- 4.2.35
* Tue Nov 26 2019 Knut Anderssen - Drop support for obsolete network device types (jsc#SLE-7753)- 4.2.34
* Mon Nov 25 2019 Knut Anderssen - Fix wireless mode and auth_mode initialization (bsc#1157394)- 4.2.33
* Mon Nov 25 2019 Knut Anderssen - Added a special type for the \"Unknown\" interfaces omitting them from the interfaces list (bsc#1156285)- 4.2.32
* Mon Nov 25 2019 Knut Anderssen - Ignores invalid udev rules parts (bsc#1157361)- 4.2.31
* Thu Nov 21 2019 Knut Alejandro Anderssen González - Firsboot dhcp: Ensure the network configuration has been read before trying to configure it by dhcp (bsc#1157429)- 4.2.30
* Thu Nov 21 2019 Michal Filka - bnc#1153198, fate#319639 - implemented proper hostname setup in installation for the new backend- 4.2.29
* Tue Nov 19 2019 David Diaz - Do not crash when wrapping text (bsc#1157161)- 4.2.28
* Tue Nov 12 2019 Josef Reidinger - fix importing dhclient_set_hostname key from autoyast profile (bsc#1152021)- 4.2.27
* Sun Nov 10 2019 Knut Anderssen - Wireless: Fix wpa auth modes selection removing the prefix from the combobox value which is not used when writing the config. (bsc#1155639)- 4.2.26
* Fri Nov 08 2019 Knut Anderssen - Live installation: - Do not try to configure dhcp when NetworkManager is in use. - Show the general tab in the lan client allowing to switch between backends when systemd is running. - Do not do a netconfig update during an installation for not breaking the current resolv configuration.- 4.2.25
* Fri Nov 01 2019 Josef Reidinger - fix typo in remote desktop file (thanks for contribution to Markus S aka kamikazow) (bsc#1155584)- 4.2.24
* Tue Oct 15 2019 Josef Reidinger - Fix crash caused by type in widget method (caused in 4.2.22 by rubocop done as side-effect of bsc#1153673 fix)- 4.2.23
* Mon Oct 14 2019 Knut Anderssen - bsc#1153673 - Fix Yast::Logger dependency in bridge connection config.- 4.2.22
* Wed Oct 09 2019 Josef Reidinger - Update reference in VLAN, Bridge or Bond when its device is removed or renamed (bsc#1153460)- 4.2.21
* Mon Oct 07 2019 Imobach Gonzalez Sosa - Place sysctl settings in /etc/sysctl.d/ (jsc#SLE-9077).- 4.2.20
* Mon Oct 07 2019 Knut Anderssen - AutoYaST: Added back the activation of s390 devices during the first stage as it was removed when switched to the new data model
* Fri Oct 04 2019 Josef Reidinger - Fix CLI tests for network (bsc#957537)- 4.2.19
* Thu Oct 03 2019 Josef Reidinger - Fix blink positioning in UI (bsc#1119407)- 4.2.18
* Wed Oct 02 2019 Knut Anderssen - bsc#1152840 - Fix interface ipaddr and prefixlen in the cloned profile.- 4.2.17
* Wed Oct 02 2019 Josef Reidinger - Adapt network CLI to new data model with improved error reporting (bsc#1151242)- 4.2.16
* Wed Oct 02 2019 Imobach Gonzalez Sosa - boo#1152748: - Fix detection of the network status during installation.- 4.1.15
* Tue Oct 01 2019 Knut Anderssen - AY: Fix interface name check for using the fallback when not set.
* Tue Oct 01 2019 Imobach Gonzalez Sosa - boo#1152627 - Fix circular dependency between DNS and Host modules - Remove unneeded code related to the already dropped feature to write the hostname to /etc/hosts.- 4.2.14
* Fri Sep 20 2019 Imobach Gonzalez Sosa - bsc#1151491 - Completed the new data model (support for TUN/TAP, bridges, bonding, VLANs, etc.). - Switched to use the new data model. - New wireless configuration workflow. - Revamped support for interfaces renaming and drivers assignment, including better udev rules handling. - Fixed /etc/hosts handling when switching from static to DHCP based configuration. - Many small fixes in different areas.- 4.2.13
* Tue Sep 10 2019 Michal Filka - bnc#1149234 - apply udev rule from AY profile according to device\'s mac value when permanent_mac is missing in list of the device\'s options- bsc#1133442 - Increased the DHCP timeout when NetworkManager is in use to its default (45 seconds).- 4.2.12
* Tue Jul 30 2019 Dominique Leuenberger - Requires hostname: there are many places where the module calls /bin/hostname (boo#1142595).- 4.2.11
* Fri Jul 19 2019 Josef Reidinger - avoid dependency on autoyast2-installation- 4.2.10
* Wed Jul 17 2019 Imobach Gonzalez Sosa - Revamp UI internals, adding new widgets, sequences and introducing the concept of interface builder.- Add initial bits of the new data model.- Fix several bugs that were introduced in version 4.2.2.- 4.2.9
* Wed Jul 03 2019 Imobach Gonzalez Sosa - The \'lan\' client returns the correct value (bsc#1140199).- 4.2.8
* Wed Jul 03 2019 Knut Anderssen - bsc#1137346 - CLI: Report an error instead of raising an exception when the device type is not provided and there is no way to infer it from the given options.
* Fri Jun 14 2019 Knut Anderssen - boo#1138297 - Improve some mocking in NetworkService.activate_network_service unit test which caused some test to fail randomly.- 4.2.7
* Fri Jun 14 2019 Knut Anderssen - boo#1138278 - Adapt the AddressDialog to use the new Y2Network::Routing class when checking if there is some default gateway defined.- 4.2.6
* Wed Jun 12 2019 Knut Anderssen - bsc#1136929 - Use the hwinfo permanent mac address instead of the current mac which could be wrong in case of an enslaved interface.- bsc#1137324 - Do not create duplicate udev rule attributes when editing an interface name.- boo#903889 - When proposing a bridge configuration for virtualization, move the routes from the enslaved interface to the new bridge.- 4.2.5
* Fri Jun 07 2019 Stasiek Michalski - Use new schema of desktop files (boo#1084864)- Clean up spec- Rename desktop files- 4.2.4
* Mon May 20 2019 Michal Filka - bnc#1131588 - display a confirmation popup when static route is going to be removed when switching a device to dhcp- 4.2.3
* Wed Apr 24 2019 knut.anderssenAATTsuse.com- Started with yast2-network refactorization: - Added the y2network namespace. - Dropped not used routing_auto client. - Reimplemented completely routing configuration droping the old Yast::Routing module. - The Y2Network::Routing configuration permits to have multiple default routes and does not drop extra options for them. That is, different routing tables can be used. (fate#326796)- 4.2.2
* Mon Apr 22 2019 Imobach Gonzalez Sosa - Fix mode/second_stage value initialization (bsc#1132057)- 4.2.1
* Fri Apr 05 2019 jreidinger - publish find dhcp interfaces to component system, so yapi can be dropped from yast2-samba-client (fate#323734)- 4.2.0
* Thu Apr 04 2019 knut.anderssenAATTsuse.com- bnc#1129012 - AY: Use the bus_id of the udev parent device when using virtio netcards and matching the existent rules with the defined in in the profile.- 4.1.45
* Thu Apr 04 2019 schubiAATTsuse.de- Showing correct start mode for nfsroot device (bsc#1105692).
* Thu Mar 21 2019 knut.anderssenAATTsuse.com- bnc#1094934 - Fixed internal error when writing remote configuration by cmdline (yast remote allow set=yes).- 4.1.44
* Wed Mar 06 2019 Ladislav Slezák - Fixed \"can\'t modify frozen String\" crashes (related to bsc#1125006 and gh#yast/yast-ruby-bindings#228)- 4.1.43
* Wed Feb 27 2019 knut.anderssenAATTsuse.com- Installation proposal (bsc#1127228, bsc#1124478, bsc#1124498): - Fixed issue refreshing the list of packages needed for the default backend the first time the proposal is called. - Do not cache the default network backend but only the current one when modified by the user in the proposal - Fallback to :wicked when saving the network if NetworkManager is selected as the service to be used but not installed.- 4.1.42
* Thu Feb 21 2019 knut.anderssenAATTsuse.com- When renaming an interface (bsc#1060207): - Offer to the user the option to update device routes that belongs to the previous interface name. - Update the Routing devices list with the new one when needed.- Do not drop configured elements from the list when canceling an edition (bsc#998540)- 4.1.41
* Tue Feb 19 2019 knut.anderssenAATTsuse.com- Installation proposal (bsc#1124478, bsc#1124498): - Do not offer NetworkManager when the package is not available - Respect the network backend selected in the proposal at the end of the installation - Removed the hostname write (127.0.0.2) from the summary- 4.1.40
* Tue Feb 12 2019 schubiAATTsuse.de- AutoYaST in running system: Do not reset /etc/hosts (bsc#1122658)- 4.1.39
* Thu Feb 07 2019 knut.anderssenAATTsuse.com- fate#324662 - Drop SuSEFirewall2 code completely. - Permits to choose not only default firewalld zones but also custom ones. - Allow the user to select the \"DEFAULT\" zone or disable the interface zone mapping through ifcfg files per interface.- 4.1.38
* Wed Feb 06 2019 knut.anderssenAATTsuse.com- bsc#1124002 - do not crash when cloning and trying to read a device protocol or portname.- 4.1.37
* Tue Jan 29 2019 mfilkaAATTsuse.com- bnc#1123102 - do not crash with internal error when no hostname is set when submitting device with static configuration- 4.1.36
* Fri Jan 25 2019 knut.anderssenAATTsuse.com- bsc#112952 - Try to install the wireless-tools package when the package is not installed and the wifi networks are scanned.- 4.1.35
* Wed Jan 23 2019 mfilkaAATTsuse.com- bnc#1122387 - do not crash with internal error when modifying /etc/hosts- 4.1.34
* Tue Jan 22 2019 mfilkaAATTsuse.com- bnc#1122517 - do not crash with internal error when cloning /etc/hosts- 4.1.33
* Fri Jan 18 2019 mfilkaAATTsuse.com- bnc#1122307 - do not crash with internal error when adding new device- 4.1.32
* Fri Jan 18 2019 schubiAATTsuse.de- AutoYaST write settings: Fixed crash while reading MAC address (bsc#1121087).- 4.1.31
* Wed Jan 16 2019 mfilkaAATTsuse.com- bnc#1121421 - do not crash with internal error when installing using AutoYaST profile with networking section- 4.1.30
* Thu Jan 10 2019 mfilkaAATTsuse.com- bnc#1111483 - write physical device into vlan\'s configuration- 4.1.29
* Fri Jan 04 2019 schubiAATTsuse.de- Added needed method GetDHCPHostnameIP again (bsc#1119690).- 4.1.28
* Fri Jan 04 2019 mfilkaAATTsuse.com- bnc#1116568 - /etc/hosts load performance improvements- 4.1.27
* Wed Jan 02 2019 schubiAATTsuse.de- Showing correct start mode for nfsroot device (bsc#1105692).- 4.1.26
* Tue Dec 18 2018 mfilkaAATTsuse.com- bnc#1119723 - properly copy ifcfg files from instsys to target- 4.1.25
* Mon Dec 10 2018 jreidingerAATTsuse.com- always use absolute path to binaries (bsc#1118291)- properly escape shell arguments (bsc#1118291)- 4.1.24
* Mon Dec 10 2018 Stefan Hundhammer - Security audit fixes: Removed unused function stdout_of() (part of bsc#1118291)- 4.1.23
* Thu Dec 06 2018 Stefan Hundhammer - Security audit fixes: Use absolute paths when calling external commands and shell-escape arguments (bsc#1118291)- 4.1.22
* Tue Dec 04 2018 mfilkaAATTsuse.com- bnc#1114213 - improved help for dns nameserver address to mention also valid format of IPv6- 4.1.21
* Thu Nov 29 2018 Noah Davis - Provide icon with module (boo#1109310)- 4.1.20
* Mon Nov 26 2018 mfilkaAATTsuse.com- bnc#934055, bnc#972463 - cleanup in Hostname / DNS tab - removed obsolete or unsupported options.- 4.1.19
* Mon Nov 26 2018 mfilkaAATTsuse.com- bnc#709176 - keep original hostnames untouched in /etc/hosts when only IP changed- 4.1.18
* Thu Nov 22 2018 mfilkaAATTsuse.com- bnc#1107470 - this bug is fixed since 4.0.14 (3.2.47)
* Sun Nov 11 2018 knut.anderssenAATTsuse.com- Yast::Lan: Added method for obtaining the NTP servers offered by DHCP (fate#323454)- 4.1.17
* Fri Nov 09 2018 dgonzalezAATTsuse.com- Allow to swich the network backend from the proposal (related to fate#326480)- 4.1.16
* Wed Oct 31 2018 mfilkaAATTsuse.com- bnc#1111925 - always propose wpa_supplicant when configuring wlan- bsc#1113080 - Fix detection of peap mode (jreidingerAATTsuse.com)- Propose most commonly used setup for WPA by default- 4.1.15
* Wed Oct 24 2018 jreidingerAATTsuse.com- Fix detection of peap mode (bsc#1113080)- 4.1.14
* Tue Oct 16 2018 knut.anderssenAATTsuse.com- Simplified the installation network proposal collecting all the configured dhcp interfaces in a single entry (fate#326480)- 4.1.13
* Tue Oct 16 2018 mfilkaAATTsuse.com- bsc#1110598 - fixed path to license file- 4.1.12
* Mon Oct 15 2018 mfilkaAATTsuse.com- fate#323454 - wicked compatible parsing of NTP servers from dhcp leases- 4.1.11
* Thu Oct 04 2018 knut.anderssenAATTsuse.com- Fixes to the networking AY schema (bsc#1108852) - Added missed s390 device \'layer2\' boolean element.- 4.1.10
* Wed Oct 03 2018 mfilkaAATTsuse.com- bnc#1105230 - do not crash with internal error when 0.0.0.0 netmask is used in the routing tab- Activate s390 network devices before applying udev naming rules, avoiding \"Invalid key/value pair in /etc/udev/rules.d/70-persistent-net.rules\" (bsc#1095761) (by mvidnerAATTsuse.com)- 4.1.9
* Tue Oct 02 2018 mfilkaAATTsuse.com- bnc#1109312 - fixed internal error (replaced calls to LanItems::FreeDevices which was removed)- 4.1.8
* Tue Sep 18 2018 mfilkaAATTsuse.com- bnc#964856 - adapted to changes in NetworkInterfaces API - GetFreeDevice and GetFreeDevices was dropped- 4.1.7
* Wed Aug 22 2018 dgonzalezAATTsuse.com- Update calls to YaST2 systemd classes (related to fate#319428)- 4.1.6
* Tue Aug 21 2018 schubiAATTsuse.de- Changed dir of COPYING file.
* Fri Aug 03 2018 knut.anderssenAATTsuse.com- Fixes to the networking AY schema (bsc#1103712) - Permitted the use of \'listentry\' element in list entries.- 4.1.5
* Thu Jul 12 2018 mfilkaAATTsuse.com- bnc#964856 - dropped calls to obsolete NetworkInterfaces API - CLI: setting device type explicitly using new type option is mandatory when adding new device- 4.1.4
* Mon Jul 02 2018 schubiAATTsuse.de- lan_test: stubbin Host.GetModified call (bnc#1052042).- 4.1.3
* Mon Jul 02 2018 schubiAATTsuse.de- Fixed flickering testcase which has been introduced by fixing bnc#1052042.- 4.1.2
* Thu Jun 28 2018 schubiAATTsuse.de- Added additional searchkeys to desktop file (fate#321043).
* Tue Jun 26 2018 mfilkaAATTsuse.com- removed NetworkStorage as it is unused (had been replaced by storage-ng)
* Fri Jun 22 2018 schubiAATTsuse.de- Removed AutoYaST dependencies in order to run the host module without AutoYaST packages (bnc#1098407).- 4.1.1
* Wed Jun 20 2018 mfilkaAATTsuse.com- dropped dead code- 4.1.0
* Wed Jun 20 2018 mfilkaAATTsuse.com- bnc#1086454 - do not enforce particular mode for IPoIB devices by default- 4.0.35
* Mon Jun 18 2018 mfilkaAATTsuse.com- bnc#1097954 - fixed several rpmlint warnings- 4.0.34
* Tue Jun 12 2018 schubiAATTsuse.de- AutoYaST: Checking for empty host name entries and informing the user. (bnc#1095113) 4.0.33
* Thu Jun 07 2018 knut.anderssenAATTsuse.com- AutoYaST: Do not crash when trying to convert the /etc/hosts profile declaration from multiple line host entries for the same host to just one line (bnc#1095971)- 4.0.32
* Wed May 09 2018 knut.anderssenAATTsuse.com- Fix the check for adjusting ifcfg configuration in case of network based root filesystem when saving the network at the end of the installation (bsc#1090752).- 4.0.31
* Wed Apr 25 2018 knut.anderssenAATTsuse.com- Y2remote: When vnc is disabled disable also all the services that are still enabled (bsc#1088646)- 4.0.30
* Wed Apr 25 2018 mfilkaAATTsuse.com- bnc#1077435 - do not crash with internal error when /etc/hosts is corrupted- 4.0.29
* Mon Apr 23 2018 mfilkaAATTsuse.com- bnc#1089471 - previous fix contains wrong check of ifcfg options and proposes wpa_supplicant incorrectly. The check was fixed and wpa_supplicant is proposed when needed only.- 4.0.28
* Sat Apr 21 2018 mfilkaAATTsuse.com- bnc#1089471 - do not propose vlan, iw and tunctl packages for installation as its functionality is implemented by wicked.- 4.0.27
* Thu Apr 19 2018 knut.anderssenAATTsuse.com- Y2Remote: - Fixed the start of services when writing (bsc#1088646) - Fixed the modification of vnc services configuration according to the selection of allowed interfaces (bsc#1088647)- 4.0.26
* Fri Apr 06 2018 knut.anderssenAATTsuse.com- Fixed preformatted proposal for network module (bsc#1088488)- 4.0.25
* Tue Mar 27 2018 lslezakAATTsuse.cz- Added missing \"textdomain\" call to properly translate the web access check box label (bsc#1081466)- 4.0.24
* Wed Mar 21 2018 knut.anderssenAATTsuse.com- Added networking interfaces \'zone\' element to the AutoYaST schema file (bsc#1013047)- 4.0.23
* Fri Mar 16 2018 knut.anderssenAATTsuse.com- Read and write the firewalld configuration when the remote access is configured through the remote client dialog (bsc#1085658)- 4.0.22
* Thu Mar 08 2018 knut.anderssenAATTsuse.com- bsc#1078991 - Do not crash when some LanItem does not have hardware info.- 4.0.21
* Tue Mar 06 2018 knut.anderssenAATTsuse.com- Tigervnc will provide the definition of firewalld services so we will use them instead of the vnc-server service definition that is shipped with firewalld (bsc#1081952)- 4.0.20
* Thu Mar 01 2018 knut.anderssenAATTsuse.com- save_network client copies wicked dhcp files from inst-sys into the target using the same dhcp id when rebooting after installation. (bsc#1082832)- 4.0.19
* Thu Mar 01 2018 lslezakAATTsuse.cz- Fixed a random build failure (introduced by the previous fix for bsc#1083015)- 4.0.18
* Tue Feb 27 2018 jreidingerAATTsuse.com- add missing textdomains (bsc#1083015)- 4.0.17
* Fri Feb 23 2018 knut.anderssenAATTsuse.com- Really translate firewalld zones (bsc#1082246)- 4.0.16
* Wed Feb 14 2018 knut.anderssenAATTsuse.com- Virtualization Bridge Proposal: Do not propose network interfaces without link as bridgeable (bsc#1062596, bsc#1072951).- 4.0.15
* Wed Jan 24 2018 mfilkaAATTsuse.com- bnc#1056109 - improved device name collision recognition when applying device renaming according to the AY profile- 4.0.14