Changelog for unifi-7.4.156-3.1.i586.rpm :

* Thu Jun 01 2023 Herbert Graeber - Not neccessary anymore to remove windows and Mac folders
* Thu Jun 01 2023 Herbert Graeber - Update to Version 7.4.156 Improvements
* Added multi-language support.
* Added support for IPTV through IGMP Proxy (requires UXG or a UniFi Gateway Console).
* Added DHCP IP leases overview in Network Settings (requires UniFi Console with UniFi OS 3.1+).
* Added hover over network names.
* Added Virtual Network Management to the Topology section (requires UDM-Pro or UDM-SE with UniFi OS 3.1+).
* This allows moving clients to different Virtual Networks without the need of putting them on a different WiFi network or by tagging VLANs on ports.
* Improved Port Profiles and Manager UX.
* Improved WiFiMan speed tests section UX.
* Improved Traffic Identification UX.
* Improved Release Notes display UX.
* Improved Network settings UX.
* Improved Gateway/Subnet validation.
* Improved inform URL pasting into the Override Inform Host field.
* Traffic Map UX update (requires UniFi Console with UniFi OS 3.0+).
* Navigate to IP groups on successful group creation from other pages.
* Radius Profile is now automatically set to Default when enabling 802.1X.
* Updated the Display Options button.
* Removed LED/LCM settings if UniFi Console is running UniFi OS 3.1 or newer (moved to Console Settings).
* Removed the Speed Test option for setups with USG.
* Speed test results were inaccurate due to hardware limitations.
* We recommend to use the WiFiman app for speed tests instead.
* Traffic Map UX update (requires UniFi Console with UniFi OS 3.0+). Port Manager
* Added an option to Select Allow or Block when restricting networks in the Port Manager.
* This allows specifying a Virtual network on each port directly without the need for a Port Profile.
* Allowed networks fields are transformed into Restricted networks.
* Allows PoE settings to be available even when a port is set to disabled.
* Removed all default Port Profiles. Clients and Devices
* Added an option to move adopted devices to different sites.
* Added actionable feedback if a device is using a fallback IP.
* Added last used IP address for offline Clients (requires UniFi Console with UniFi OS 3.1+).
* Added a Group By Application toggle in the Display Options on the Devices page.
* Allow searching clients by Fixed IP.
* Improved Client side panel UX.
* Improved Devices page UX.
* Improved UniFi device update resiliency by adding a DNS fallback.
* Reserved the 192.168.1.20 DHCP lease which is used as the UniFi devices fallback address.
* If you\'re using this IP as a Fixed IP for a client, then assign a different address to the client.
* Updated the Connection Column on the clients and devices page.
* Prevent removing a device when the device is busy. Notifications
* Added System log for TX/RX errors on ports.
* Added notifications for device update failures.
* Improved email notification UX.
* Notification settings are now configurable per user. WAN
* Added DHCP CoS setting to Internet settings (requires UniFi Console with UniFi OS 3.0+).
* Improved Internet Health side panel UX.
* Migrated ping.ubnt.com echo server to ping.ui.com. Wireless
* Added Connectivity section under WiFi Insights.
* Added notice for AP with lower link speeds.
* Added a warning for APs that have too many Wireless Mesh downlinks.
* Added a warning when configuring a DFS channel.
* Added a warning when changing 2.4GHz channels to any that are not 1/6/11.
* Added optimized performance to the WiFi performance section.
* Added Meshing warning for APs with AC power.
* Improved WiFi settings UX.
* Improved DFS radar-detected notification.
* Improved validation for selecting incorrect radio channels and channel widths.
* Removed UNII-3 channels from Nightly Channel Optimization in European countries.
* Hide WiFi 6E radio if the country does not allow using it. Hotspot and Guests
* Added an option to disable the Guest Portal landing page.
* Added Payment Package preview in Hotspot Portal settings.
* Improved UX for Guest Hotspot.
* Automatically select open security protocol when using Hotspot Portal in WiFi settings.
* Removed all Payment methods except Stripe for Hotspot Portal. VPN
* Added OpenVPN server support (requires UXG or a UniFi Gateway Console).
* Added UXG-Pro Teleport VPN support on the Default site (requires UniFi Console with UniFi OS 2.4+)
* Support for other sites will be available in a future release.
* Improved Subnet/Gateway validation for all VPN protocols.
* If Teleport VPN is disabled the used subnet is now released and can be used on other networks.
* Removed insecure IPsec 3DES encryption on UniFi OS Gateways. Application Firewall
* Added support for IPv6 in Domain Traffic Rules.
* Added functionality to Traffic Rules for allowing domains blocked by Ad Blocking.
* Improved Application Firewall settings.
* Improved Honeypot IP validation.
* Removed Honeypot configurations from setups that have a USG (this caused configuration issues). Bugfixes
* Fixed gateway configuration error when assigning an Ethernet port profile with unsupported link speed.
* Fixed invalid validation errors for Auto Scale Network.
* Fixed spam in Trigger Logs caused by broadcast traffic.
* Fixed gateway being re-provisioned every 10 minutes when Talk is configured.
* Fixed loading System Logs in some rare cases.
* Fixed expired certificate used for WiFiman on UniFi Consoles.
* Fixed Auto-Scale Network being enabled when configured to be disabled on a new network.
* Fixed the Direct Remote Connection feature was showing as unsupported in some cases.
* Fixed unable to save Firewall settings in rare cases.
* Fixed unable to load Security Detection logs in rare cases.
* Fixed unable to reach Guest Portal when connected to an AP.
* Fixed link speed validation not working on InWall AP ports.
* Fixed false positive \"RADIUS authentication took more than 10 seconds\" log messages.
* Fixed an issue that allowed configuring IPv6 settings for L3 networks.
* Fixed an issue where the action shows as \"Unknown\" for one Guest firewall rule.
* Fixed unable to configure Port Groups in firewall rules when it should be allowed.
* Fixed provisioning invalid blocked client list to gateways.
* Fixed USW-Flex-XG/USW-Enteprise-8-PoE might show disconnected during adoption/upgrading.
* Fixed unable to configure Interface Blocker. VPN
* Fixed OpenVPN Client not working properly when there IPv6 is enabled on the WAN.
* Fixed unnecessary VPN Server name truncating. WAN
* Fixed missing WAN IP addresses in the Internet/VPN settings.
* Fixed VLAN Only network not working on WAN2 when it\'s remapped as a LAN port.
* Fixed gateway configuration error when configuring a disabled port as WAN(with VLAN) during port remapping. Clients and Devices
* Fixed unable to load the Devices page in rare cases.
* Fixed inconsistent All Time Internet Activity in the Insights section of the Client side panel.
* Fixed VLAN IDs are not correctly reported for clients.
* Mon Feb 06 2023 Herbert Graeber - Update to Version 7.3.83 Improvements
* Add IP Validation in Traffic Rules & Traffic Routes.
* Improve PoE usage information in the device property panel.
* Improve the “Managed by other” device panel
* Show “-” for Subnet, IP Leases, and Internet for networks with Third-party gateway selected.
* Prevent disabling Wireless Meshing if there are devices connected via Wireless Meshing.
* Only show Power Source for USW-Flex switches when the switch does not detect MAX input power. Bugfixes
* Fix rare case where users are unable to access the dashboard on self-hosted applications.
* Fix invalid interface configuration in rare cases.
* Fix additional IP addresses that were not saved in the Internet Settings.
* Fix MAC Cloning with identical MAC addresses could cause port misconfigurations.
* Fix missing radio GHz translation on the devices page.
* Fix unable to create a new L3 Network when the setup has no gateway.
* Fix gateway configuration error when saving invalid port remapping configurations.
* Fix infinite loading bar when opening the clients page.
* Fix rare false \"IP Outside of range\" in system logs.
* Fix applying Multicast DNS and IGMP snooping.
* Fix issues where incorrect fields were shown when creating firewall rules.
* Fix unable to remove LTE failover notification.
* Fix unable to download a second backup file in the same session.
* Fix DNS servers being undefined in the WireGuard config file.
* Fix disabling Wireless Meshing when configured to be disabled.
* Fix page crashes when going to Downlinks in the AP property panel.
* Fix admins are incorrectly redirected to Hotspot Manager.
* Fix gateway configuration error when the UPnP WAN interface was set to disabled.
* Fix rare page crash when opening a USW-MC device property panel.
* Fix device adoption for L3 setups.
* Disable Ad blocking for networks that are removed/deleted.
* Wed Feb 01 2023 Herbert Graeber - Update to Version 7.3.81 Improvements
* Add IP Validation in Traffic Rules & Traffic Routes.
* Adjust PoE Budget warning thresholds for switches with a budget of 20W or lower.
* Improve PoE usage information in the device property panel.
* Improve the “Managed by other” device panel
* Show “-” for Subnet, IP Leases, and Internet for networks with Third-party gateway selected.
* Prevent disabling Wireless Meshing if there are devices connected via Wireless Meshing.
* Only show Power Source for USW-Flex switches when the switch does not detect MAX input power. Bugfixes
* Fix additional IP addresses that were not saved in the Internet Settings.
* Fix MAC Cloning with identical MAC addresses could cause port misconfigurations.
* Fix missing radio GHz translation on the devices page.
* Fix unable to create a new L3 Network when the setup has no gateway.
* Fix gateway configuration error when saving invalid port remapping configurations.
* Fix infinite loading bar when opening the clients page.
* Fix rare false \"IP Outside of range\" in system logs.
* Fix applying Multicast DNS and IGMP snooping.
* Fix issues where incorrect fields were shown when creating firewall rules.
* Fix unable to remove LTE failover notification.
* Fix unable to download a second backup file in the same session.
* Fix DNS servers being undefined in the WireGuard config file.
* Fix disabling Wireless Meshing when configured to be disabled.
* Fix page crashes when going to Downlinks in the AP property panel.
* Fix admins are incorrectly redirected to Hotspot Manager.
* Fix gateway configuration error when the UPnP WAN interface was set to disabled.
* Fix rare page crash when opening a USW-MC device property panel.
* Fix device adoption for L3 setups.
* Disable Ad blocking for networks that are removed/deleted.
* Sun Jan 22 2023 Herbert Graeber - Fix creation of user and group \"unifi\"
* Mon Jan 16 2023 Herbert Graeber - Add requirement for openssl used by import-cert script
* Fri Dec 30 2022 Herbert Graeber - Change removed PermissionsStart to \'+\' prefix in service file
* Fri Dec 30 2022 Herbert Graeber - Fix creation of group unifi
* Fri Dec 02 2022 Herbert Graeber - Update to Version 7.3.76
* Add direct remote connection feature for faster connections from mobile apps.
*
* Add \"Low-performance mode\" option for all U6 APs that need PoE+ power.
* Add option to bulk-update UniFi Devices.
* Add Trigger logs (Firewall, Traffic rules & routes), requires UniFi OS 3.0 or newer.
* Add VPN Client Routing, requires UniFi OS 3.0 or newer.
* Add Ad-blocking feature, requires UniFi OS 3.0 or newer.
* Add Wireguard VPN server support, requires UniFi OS 3.0 or newer.
* Allow adding multiple VPN Clients, requires UniFi OS 3.0 or newer.
* Improve the System Log section.
* Improve the Client details panel.
* Improve Device details panel.
* Improve Dashboard UX.
* Improve Wifi Performance UX.
* Improve Settings UX.
* Benefit: Faster remote connections from mobile app from UniFi applications (including Protect)
* Works only on UniFi OS consoles with built-in gateway
* Can be enabled if the console has a Public IP.
* Can be turned on/off on System settings -> Advanced
* This feature creates firewall rule that opens port 443 from internet Improvements
* Add restore default AP settings button in Global AP Settings.
* Add warning about band steering not working when TX power is set to low.
* Add option to block traffic from traffic identification section (appears on hover).
* Add validation for QoS Tag and VLAN 0 on WAN.
* Add Client Connection Logs to Clients panel.
* Add AP Logs to System Log.
* Add logs to the AP panel.
* Add confirmation modal for client reconnection.
* Add automatic scroll down when enabling wifi scheduler.
* Add Debug Tools option in System settings. (this enables Debug Terminals)
* Allow searching teleport clients.
* Allow searching local DNS entries for clients.
* Lower ARP cache timeout on WAN interface.
* Show fixed IP address for offline clients.
* Show only IP Range when DHCP Server mode is selected.
* Rename Threat logs as suspicious activity logs.
* Consolidate Gateway configuration error logs to once per day.
* Update UDM Pro and UDM-SE side panels.
* Throttle Firmware Update Available Notifications by device and version.
* Throttle RADIUS Server issue notification.
* Improve empty section UX.
* Improve navigation from device downlink table to the port manager.
* Improve validation for client Local DNS.
* Improve System settings UX.
* Improve WiFi performance tooltip when hovering clients on the chart.
* Improve device topology in certain environments.
* Improve settings searching.
* Improve Lock AP UX for wireless clients.
* Improve offline reasons in the internet health section on the dashboard.
* Improve internet disconnection notifications.
* Display Critical events in System Logs.
* Reduce DNS traffic for ULTE devices (Requires UniFi OS 3.0 or newer).
* Upgrade Network application to Java 11.
* Bugfixes
* Fix inaccurate WiFi standard for some 2.4GHz clients.
* Fix honeypot detections not loading properly.
* Fix missing Security Detections in System Logs.
* Fix missing Air Stats and Channel Utilization in device property panels.
* Fix Half Duplex port configuration appearing as Auto Negotiation.
* Fix configuring Static IPs for devices.
* Fix issue where System Logs were not loading on standalone applications when accessing remotely.
* Fix backups don\'t respect retention settings.
* Fix missing AP clients count in the WiFi Performance section.
* Fix false system log notifications about rogue DHCP server.
* Fix issue where traffic statistics were not cleared when clearing Traffic History.
* Fix dead-end issue on UXG-PRO setup
* Fix issue where not Traffic stats reported for secondary internet, when using traffic routes.
* Fix issue where speed tests that were running via WAN with VLAN were missing.
* Fix issue where Wired Clients couldn’t be blocked if connected directly to UDM / UDM-Pro UDM-SE console.
* Fix issue where user cannot remove an admin with View Only role using the “Remove global permissions“ checkbox.
* Fix issue where UXG Pro was not using U-LTE for internet failover if used with cloud console.
* Fix issue on UBB when device is offline and user clicks on Air Stats can lead to dead-end.
* Fix issue where clicking on Ports of RPS-Pro while it is updating/adopting would result in dead-end.
* Fix issue where Guest Hotspot redirection does not work on downlink switches when using SFP+ as a downlink.
* Fix issue where meshing on AP device can’t be disabled.
* Fix issue where value \"NaN\" was visible as usable IPs.
* Fix issue where inaccurate TX Retry % was displayed.
* Fix unable to open offline AP panel.
* Fix issue where WAN networks are missing after UXG Pro adoption.
* Fix issue where the number of SSIDs exceeds the maximum SSID limit after site import.
* Fix previously connected wireless clients that are missing from topology after a restart.
* Fix rare gateway configuration issues when using site-to-site VPN with IKEv1 and Static Routing.
* Mon Oct 31 2022 Herbert Graeber - Update to Version 7.2.95 Improvements
* Update apache commons text to version 1.10.0
* Tue Sep 13 2022 Herbert Graeber - Update to Version 7.2.94 Bugfixes
* Fix possible dead-end during the adoption of UXG-PRO.
* Fix issue where nested symbolic links were created for data, logs, and run directories.
* Wed Aug 10 2022 Herbert Graeber - Update to Version 7.2.92 Bugfixes
* Fix issue where WAN networks are missing after adopting UXG Pro.
* Fix issue where fast-roaming is not working in rare cases.
* Fix issue where the application can’t be run for the first time after installation on Ubuntu/Debian.
* Fix performance issues on UXG-Pro.- Update to version 7.2.91 Improvements
* Add Local DNS Record support for Clients.
* Add Internet Automatic Speed Test settings.
* Add tooltip for long names in settings tables.
* Add tooltip for “FE” and “E” internet speeds.
* Add toasts for Site Export/Import actions.
* Add Global Network and Switch Settings.
* Add internet health section in the dashboard.
* Add Teleport Clients overview to Teleport VPN settings.
* Add Wan IP to the gateway overview side panel.
* Add a timezone field for Cloud Consoles.
* Add WiFi Network column to Clients page.
* Add Region matching to Traffic Routes. (requires 2.5.x/1.13.x FW)
* Add OpenVPN client support. (requires 2.5.x/1.13.x FW)
* Add the warning copy for disabling \"New Device Auto-Link\".
* Add WiFi Performance section.
* Add the gateway IP to USW settings automatically(if DHCP server exists).
* Add Connectivity Monitor setting.
* Add Speed Limit for Traffic Rules. (requires 2.5.x/1.13.x FW)
* Add notification about Gateway configuration commit error.
* Add Warning about WiFi\'s need to be provision and clients may lose connectivity when editing Wifi settings.
* Add Antenna Gain value for UAP-AC-M.
* Add an error message when deleting a Network that\'s referred by WiFi network.
* Improve system stability.
* Improve backup restore process when restoring backup from different console models.
* Improve reliability of WAN failover events. (requires 2.5.x/1.13.x FW)
* Improve search field when names contain dashes.
* Improve dashboard widget spacing.
* Improve Port insights UX.
* Improve Traffic Overview UX.
* Improve validation for Group Rekey field.
* Allow migrating network to L3 switch.
* Set legacy support and beacon rate based on the selected min data rate.
* Provide actionable feedback when user tries to import console backup(
*.unifi) into Network Application.
* Disable restricted fields for UID WiFi.
* Display Minimum Rate information under 2.4 GHz Rates.
* Show Last Seen time for offline devices in Uptime column.
* Set default value for MinRSSI to -80 dBm.
* Remove Override Inform Host field for cloud console.
* Replace JSVC with systemd for process management for self-hosted linux. Bugfixes
* Fix gateway configuration error if a Traffic Route with an unknown or unsupported network is used.
* Fix an issue where the Admin Access logs page was empty for Cloud Consoles.
* Fix rare gateway configuration error related to incorrect RADIUS profile.
* Fix inform process exception when discovered device is missing model and version.
* Fix issue where the Settings page crash when adopting an AP.
* Fix issue where SNAT does not work for additional public IPs with PPPoE.
* Fix VPN Server subnet size options.
* Fix issue where PoE mode was not editable for PoE capable WAN ports.
* Fix UI Verify Push login doesn\'t work when accessing through unifi.ui.com.
* Fix issue with Internet VLAN ID 0 and QoS Tag.
* Fix issue where custom DHCP lease time is not applied to the DHCP server running on L3 USW.
* Fix issue where Traffic Overview was showing initial range 1 week.
* Fix tagged networks not showing properly on switch ports profile \"All\".
* Fix issue where the internet stopped working after adopting UXG-Pro using advanced adoption.
* Fix an issue where the UXG-Pro outlet list doesn\'t show the outlet name and status.
* Fix issue with validating channels on 5 GHz and 6 GHz bands.
* Fix issue with VLAN ID value validation in Internet settings.
* Fix issue where excluded APs would stay listed after forgetting an AP.
* Fix rare issues where wireless uplinked AP is not provisioned correctly.
* Fix issue where WiFi security changes when turning on the 6GHz band.
* Fix issue with Outlets for USW-Mission-Critical.
* Disable dropdowns when the port profile is read-only.
* Wed Jul 27 2022 Herbert Graeber - Version 7.1.68 Improvements
* Improve application backup and restore resiliency
* Wed Jun 01 2022 Herbert Graeber - Version 7.1.66 Improvements
* Improve application stability when using mobile apps.
* Mon May 16 2022 Herbert Graeber - Version 7.1.65 Bugfixes
* Fix memory leak affecting users using a self-hosted version of the Network application and using VPN features.
* Fix rare issue applying configuration on UXG Pro.
* Fix USW adoption issue due to a invalid IP subnet configuration for L3 Networks/Static Routes.
* Fix a rare issue where sometimes UXG-Pro adoption does not work.
* Fix various issues with creating/editing traffic rules/routes.
* Wed Apr 27 2022 Herbert Graeber - Version 7.1.61 Overview
* Add Teleport VPN (Requires firmware version 1.12.x/2.4.x or newer). (not available for UXG)
* Add Traffic Routes (Requires UDM/UXG firmware version 1.12.8/2.4.x or newer)
* Add Switch Ports Insights and bulk-port editing.
* Improve Search & Filters on the Devices/Clients/Notifications page.
* Improve Traffic statistics.
* Improve UX for Global AP Settings.
* Improve WiFi Statistics UX. Improvements
* Add AP widget for UniFi clients.
* Add MIMO column in the Clients page.
* Add 802.1x ID/VLAN column in the Clients page.
* Add warning for HTTPS limitation when Facebook WiFi is selected.
* Add IPv6 support for UID VPN.
* Add multi-search to Devices, UniFi Devices & Notifications.
* Add missing WAN DHCP Client options.
* Add confirmation dialog to disable the AP meshing setting.
* Add option to forget clients.
* Add IP validation before setting a Honeypot IP.
* Add information if WAN IP is a local IP when configuring a VPN.
* Add max DHCP Lease Range validation for Network form.
* Allow Client connect to lock APs only if selected AP is stable.
* Improve the Advanced adoption UX.
* Improve fixed IP Address error message.
* Improve wireless uplink adoption stability.
* Improve Settings Search page highlight.
* Improve display of the channel value in the WiFiman table and property panel.
* Update the device manage section UX.
* Update USW-Pro-Aggregation property panel.
* Update unrecognized client icons.
* Update RPS Anomalies list.
* Update countries and territories in Country restrictions.
* Update default Gateway ARP Cache timeout to 10 minutes.
* Update Settings Search UX.
* Update DPI Signatures (Requires 1.12.15 or newer).
* Update Log4j to 2.17.2.
* Enable debug terminal for USP RPS.
* Show offline Non-Network devices on the Device page
* Show Link Quality as experience for UBB\'s.
* Show what Radio is used for the Link in the UBB property panel.
* Show USW-Flex-Mini memory usage in the devices table.
* Display Clients/Guests at the top of the Device panel.
* Display Device Capacity for Cloud Console.
* Display last seen in the uptime column.
* Replace (unsupported) Power Utilization with Memory Usage for USP-Strip/Plug.
* Re-organize clients side panel overview.
* Process device updates less frequently on larger setups.
* Close U-LTE setup wizard final screen when U-LTE is adopted.
* Do not include offline devices in the Lock AP device capability check.
* Remove Network dropdown under Settings for Gateways, which already exists under Overview.
* Unlock Client locked to Access Point if it was forgotten. Bugfixes
* Fix issue where limited admins cannot access the application in rare cases.
* Fix issue where admin notifications were sent, although disabled.
* Fix missing validation for DHCPv6 Range.
* Fix issue where Honeypot Alert source IP and service column were empty.
* Fix issue where “Provision” and “Open Terminal” toggle were not grayed out for offline devices.
* Fix issue where channel width shows blank when configured via mobile apps.
* Fix issue in RF Scan output.
* Fix inability to set Fixed IP addresses for a client on sites with L3 Switches.
* Fix connected downlink incorrectly reported as isolated.
* Fix firewall IP range validation.
* Fix tiny theme images on the Safari browser.
* Fix SMTP settings are ignored when sending mail.
* Fix checkbox value for disabled Multicast DNS Setting.
* Fix missing default sorting for Port and IP Groups.
* Fix incorrect time format for device firmware update check.
* Fix AP Group selection.
* Fix incorrect warning messages when UBB is upgrading.
* Fix missing custom upgrade for UXG.
* Fix missing services configuration for USP-RPS/UXG-Pro.
* Fix port remapping issues with UXG/USG.
* Fix uplink device showing itself in port diagram tooltips.
* Fix device is downgraded during adoption.
* Fix Utilization chart shouldn\'t surpass 100%.
* Fix missing Clients/Guests for UXG.
* Fix UBB LED configuration.
* Fix issue preventing provisioning Firewall rules, Traffic Rules, and Traffic Routes with paused Networks.
* Fix issue when the user can’t edit Threat Management settings.
* Fix issue where devices connected to the port with LAG enabled do not reconnect after the application update.
* Fix issue where Site-to-Site VPN connection is stalling in rare cases.
* Fix rare upgrade issue for those upgrading from version 4.x.
* Fix issue where Honeypot hits with Detect Only setting for Threat management don\'t send notifications to users.
* Fix issue where incorrect System Sensitivity was set when enabling Threat management.
* Fix issue where Guest Hotspot Profile couldn\'t be saved in rare cases.
* Fix issues in Switch port insights on Safari browser.
* Fix Country Restriction limit for UXG.
* Fix issue where DHCP Guarding option was not available in Network settings.
* Fix missing information in device columns if the device has an update available.
* Fix issue where changes were not saved when changing Access Point Channel Optimization setting.
* Fix issue where APs Wireless Meshing setting unexpectedly resets to \"Auto\" value.
* Fix issue where Multi-factor authentication with non-default method failed on the Remote Access portal.
* Fix issue where Firewall & Security Settings cannot be saved.
* Fix issue where Guest Hotspot vouchers cannot be printed.
* Fix issue where Time Range for Traffic Rule cannot cover nighttime.
* Fix device image size for devices with long names.
* Fix page crashes when switching between sites in rare cases.
* Fix issue where \"Down Pkts/Bytes\" was listed twice.
* Fix issue where AP settings are incorrect temporary after making some changes.
* Fix an issue where the Auto Update dialog showed up twice.
* Fix issue where Min. Data Rate Control for 2.4 GHz in WiFi settings cannot be enabled.
* Fix issue where Internet settings reset to Auto when adding DDNS entries.
* Fix old reference to Connectivity Monitor in the max SSID\'s tooltip.
* Fix issue where WiFi Guest Network Type could revert to Standard.
* Fix missing Client MAC address in client property panel when the client is offline.
* Fix issue where certain admins cannot edit certain settings after restoring from a backup.
* Fix the issue where System Settings can\'t be saved.
* Fix issue where default port profiles were not read-only.
* Fix unable to open device property panels for disabled/disconnected devices.
* Disable AP Nightly Channel Optimization Toggle if the global AP setting is disabled.
* Disable the Wireless Meshing setting if it can not be turned on.
* Disable DPI service if Traffic Identification is disabled.
* Hide interface options for not supported devices in Port Forwarding form.
* Show DPI Restrictions for supported consoles if any existing rule exists.
* Prevent situation when UBB AP data were shown as Station and the other way round; also show correct wired/wireless uplink type.
* Wed Mar 30 2022 Herbert Graeber - Version 7.0.25 Bugfixes
* Fix unable to resume the default network.
* Fix rare upgrade issue for those upgrading from version 4.x.
* Fix Internet Source IP in the Network settings, preventing users from changing static IP.
* Fix unable to edit and create Traffic Restrictions.
* Tue Mar 01 2022 Herbert Graeber - Version 7.0.23 Bugfixes
* Fix issue where RADIUS authentication was not working when using the default auth server.
* Fix issue where Traffic Rules Region matching option was available, will be back in a future release.
* Fix changing VLAN-Only Networks to a regular Corporate Network.- Version 7.0.22 Bugfixes
* Provision UniFi OS Gateway once after upgrading to fix Console lockup when social media websites are blocked on DNS level.
* Fix issue where new L2TP VPN users are incorrectly created.- Version 7.0.21 Improvements
* Update DHCP Relay DHCP Servers copy, add global setting notice. Bugfixes
* Fix rare console lockup issue, when social websites are blocked on DNS level.
* Fix UXG-Pro remains disconnected after the application host changes IP.
* Fix AP Group selection.
* Fix configuring VPN servers for setups with a USG.- Version 7.0.20 Improvements
* Improve settings user interface.
* Improve dashboard user interface.
* Update log4j version to 2.17.0 (CVE-2021-45105).
* Add a white theme to the settings page.
* Add Multicast DNS setting for each Network.
* Add limits for data retention settings.
* Add UniFi Device disconnect notifications.
* Add WebRTC support for Apple M1 chip for self installs.
* Add support for reconnecting UniFi Clients, e.g. UniFi Protect WiFi cameras.
* Add New Device Auto-Link setting in Global AP Settings.
* Add smaller subnets to the Network form.
* Add Multi-factor authentication support.
* Add \"Auto Backup\" feature to Settings.
* Add pause/resume to WiFi, network, Site to Site VPN and RADIUS server tables.
* Add WAN connection failed and WAN connection restored notifications.
* Add sorting by the uptime for clients.
* Allow users to select RADIUS profile in VPN settings.
* Allow max 255 networks on the UDM-Pro/UXG-Pro/UDM-SE.
* Allow forgetting devices in the Adoption Failed state.
* Sort Traffic Overview widget in Dashboard by total usage.
* Display wired experience in grid view for clients.
* Use Network name for auto defined port profiles.
* Enable mDNS by default for new Networks when using Auto settings.
* Improve WiFiman Signal Mapper latency when roaming between access points.
* Show Geo Source and Destination in Threat event details, if they differ.
* Display the clients IP address rather than the configured fixed IP, if they differ.
* Disable invalid Port Forward configurations.
* Update translation for U-LTE Backup in Network form.
* Implement L3 switch DHCP relay support.
* Reduce Dashboard speed test duration (requires UDM FW 1.11.0 or newer).
* Display gateway information for sites that have gateways on self-installs.
* Improve live preview of background change in Hotspot Portal Design.
* Rename WAN1 to \"Default\" and WAN2 to \"Backup\".
* Change default LAN name.
* Disable multi site management by default on new setups.
* Consider outlet configuration when copying device configuration.
* Device update intervals should consider real-time update settings. Bugfixes
* Fix L3 switch networks omitted from VPNs
* Fix wired client having a wireless icon on Dashboard.
* Fix issue where the VLAN field gets populated with a VLAN for the first network in a network group.
* Fix invalid hardware offload message for UDM/UXG devices.
* Fix inverted wireless client stats on Dashboard.
* Fix cannot provision UDM when Traffic Identification is enabled and the default LAN is disabled.
* Fix IPS/IDS service failing when there are no networks enabled.
* Fix not all APs are provisioned on AP Group changes.
* Fix cannot add IPv6 static default gateway route.
* Fix link labels in Topology when zooming in Safari browser.
* Fix \"Isolated\" and \"Managed by others\" filters in the Topology section.
* Fix the \"Configure port VLAN\" button in the device property panel.
* Fix default values for VPN Server form.
* Fix page crash when selecting Downlink in device property panels.
* Fix applying changes for LCM brightness on UDM/UXG device(s).
* Fix WiFi AI failing due to invalid channel lists.
* Fix ISP Utilization does not use peak transfer rates.
* Fix updating locale settings for non-default sites on UniFi OS Console.
* Fix USP-Plug name change.
* Fix module information not showing for SFP28 ports.
* Fix unable to configure 2.4GHz channel/width for BeaconHD.
* Fix client traffic stats not updating after changing LAN subnet.
* Fix a firewall rule validation issue.
* Fix voucher showing incorrect expiration days.
* Fix missing LAN stats in the legacy statistics page.
* Fix page crash when changing echo server with Radio settings opened.
* Fix missing statistics for WAN with a VLAN interface.
* Redirect to correct WAN form after a speedtest.
* Correctly show UDMs as unsupported in switch profiles.
* Remove unsupported Auto Site to Site VPN\'s on setups with a UDM.
* Show the correct uplink port # in the device section.
* Filter out VLAN-only network for Traffic Rules.
* Limit Country Restriction selection in Settings according to device capabilities.
* Visually distinguish \"Offline\" devices in the Topology section.
* Correctly fill in the threat map when the country block is set to \"Allow\".
* Forbid to delete WAN2 on UDM device.
* Wed Dec 15 2021 Herbert Graeber - Fix UniFi.unix.zip
* Wed Dec 15 2021 Herbert Graeber - Version 6.5.55 Improvements
* Update log4j version to 2.16.0 (CVE-2021-45046)
* Sun Dec 12 2021 Herbert Graeber - Version 6.5.54 Bugfixes
* Fix a security vulnerability found in a 3rd party library (CVE-2021-44228).
* Tue Nov 23 2021 Herbert Graeber - Version 6.5.53 Bugfixes
* Fix gateway configuration failure when traffic rules are configured.- Version 6.5.52 Bugfixes
* Fix missing “Router” field in Networks form, when setup has L3 Switch.- Version 6.5.51 Improvements
* Add an icon for VPN clients in the clients page.
* Add a new Traffic Inspector page.
* Add Traffic rules. (Requires UDM 1.11 FW or newer)
* Add the ability to lock a client to a specific AP. (requires UAP firmware 5.76.0 or newer)
* Add Internet Latency on Dashboard for setups with USG.
* Add Uplink/Port column in the devices page.
* Add secondary sorting by connection type when sorting by the vendor on the clients page.
* Add support for ARP Cache Timeout for UDM and UXG.
* Add \"Create WiFi\" toast when adopting AP without existing WiFi.
* Add DFS channels to default WIFi AI exclude channels list.
* Add informative tooltips in WiFi Settings.
* Improve client name display.
* Improve reliability of the upgrade process.
* Improve dashboard responsive styling.
* Improve table column header styles.
* Improve FW status in Device table when upgrading.
* Improve clients page performance with lots of Offline clients.
* Improve user experience for tables inside panels.
* Limit Mongo wiredTiger cache size to 256M. (see more details here)
* Clean up Notifications based on retention settings.
* Change default auto-backup settings.
* Default to active WAN in the dashboard.
* Reorder Traffic & Security setting order.
* Re-center topology when the filter is changed.
* Hide offline devices by default in topology.
* Add zoom-in/zoom-out buttons in Topology.
* Display VPN client network name.
* VPN Settings optimization.
* Remove System Utilization from the dashboard.
* Auto-update device firmware when adopting a new device.
* Use the most recent Traffic Overview stats on Dashboard. Bugfixes
* Stop retrying device auto-adoption after 3 failed attempts.
* Fix device scaling issues in Topology on Safari browser.
* Fix unable to remove an administrator from sites.
* Fix U-LTE Pro Adoption modal Network Selection.
* Fix user interface crash in Hotspot form.
* Fix element adoption when the site has RADIUS assigned VLAN SSID.
* Fix UID VPN users not being shown on the clients page.
* Fix issue where U-LTE device failover would not work correctly.
* Fix issue when dashboard can’t be opened when ISP section is missing latency information.
* Fix issue when cannot disable unused Radius Server.
* Fix issue where a Honeypot could refer to a deleted Network.
* Fix issue where client name is constantly changing.
* Fix visual text overflows for long client names.
* Fix missing WAN IP on the dashboard when using PPPoE or WAN VLANs.
* Fix speedtest failure when the WAN interface has VLAN/is PPPoE.
* Fix VPN Checkmark alignment in settings.
* Fix Port Profile Override not being overwritten by port profile when selected.
* Fix issue where the user could disable meshing on access points that can only wireless uplink.
* Fix issue where invited administrators would have View Only Role.
* Fix association failure statistics not displayed on Legacy Dashboard.
* Fix missing device icon in notifications.
* Fix network VLAN validation issue.
* Fix page crash in the dashboard for setups without gateway/uplink.
* Fix U-LTE Pro Adoption modal Network Selection.
* Fix issue where all devices were not displayed in the Device list.
* Fix Backup is not respecting retention settings for Notifications and DPI statistics.
* Fix Hotspot form Security settings when using WPA3.
* Fix issues where the user can’t change the color theme.
* Fix MAC address clone field formatting.
* Fix notification email using the wrong timezone.
* Fix ISP utilization granularity for the last day.
* Fix issue where UniFi Network backups fill up the data partition on the UDM-Pro.
* Fix number input update when using the up or down arrow.
* Fix sorting by a client in the statistics page.
* Fix visual text overflows for long client names.
* Fix users with limited permissions cannot access the application.
* Fix application failing to upgrade from 5.10.x versions.
* Fix device page not loading in rare cases.
* Fix traffic usage stats inconsistencies on dashboard and statistics pages.
* Fix Dashboard is missing WiFi Client count for 1 month view.
* Fix missing Simple VPN clients in clients list.
* Fix missing WAN IP when using WAN VLAN.
* Fix application cannot start because of Radius failure.
* Fix missing Unsplash background in Hotspot Portal.
* Fix USP-Plug/Strip adoption issues on setups with WPA3 only.
* Fix Broken legacy threat management page.
* Fix Disappearing graph when opening device panel.
* Fix unable to edit client name in topology page.
* Fix issue where TOR events are not present in the IPS map.
* Fix issue where ports would not show auto-negotiation by default.
* Fix issue where an unrecognized console was showing when the dashboard was being loaded.
* Fix unable to apply port profiles on rare cases.
* Fix unable to upload custom background for Guest Portal.
* Fix unable to access WAN port settings on UDR console.
* Fix misaligned client table columns.
* Fix page crash when accessing downlink.
* Allow to display pending devices if the admin has adopt permissions (for standalone application only).
* Allow to restart the device if the view-only admin has restart permissions (for standalone application only).
* Remove the \"meters\" label for route distance.
* Redirect to the last used site that the user has access to.
* Use the correct images for UAP-AC-M-Pro.
* Use default LAN IP for UXG in the dashboard and property panel.
* Uplink/AP port field & display options AP dropdown.
* Show correct state when a device fails to adopt.
* Peak Upload / Download Usage was reversed in Internet Settings.
* Show correct PoE type icon for ports.
* Update logic for \"View improvements\" in the Notifications page.
* Display client name in AP history.
* Do not provision disabled networks on UDM.
* Set exposed to Site VPN for UID VPN, so users can traverse policy-based IPsec S2S VPNs.
* Prioritize LTE DNS entries over default 1.1.1.1.
* Populate site-wide LCM brightness upon adoption.
* Remove AP Group from WiFi configuration when AP Group is deleted.
* Fri Sep 24 2021 Herbert Graeber - Update to version 6.4.54 Overview
* Notification re-work.
* Real-time traffic updates from Gateway (UDM/UXG).
* Improve system performance.
* Improve application latency. Improvements
* Add \"Optimize IoT WiFi connectivity\" field for WiFi configuration.
* Add WiFi interference chart.
* Add WiFi settings to the Hotspot form.
* Add WPA3 support for UDM Base. (Requires 1.11 or newer UDM FW)
* Add status section to display options in Topology.
* Add default firewall rule to allow UniFi Talk traffic. (only when the application is configured)
* Add local gateway domain name as DNS entry.
* Add power source options to the USW-Flex property panel.
* Allow enabling VPN on existing networks.
* Adjust property panel table column styling.
* Adjust displaying wired experience.
* Improve WAN failover notifications.
* Improve application (startup) stability.
* Improve dashboard AP dropdown styling for smaller screens.
* Improve clients table sorting.
* Disable WiFi Legacy Support if Auto-optimize is enabled.
* Disable edit for default Switch Ports.
* Disable WiFi Data Rate settings if Network Auto-Optimize is enabled.
* Enable multicast block if Auto-optimize is enabled, and there are more than 10 APs assigned to SSID.
* Clean up daily DPI statistics based on statistics data retention setting.
* Show correct memory usage values in the device panel.
* Display device name in forget device modal title.
* Non-network devices will report pending adoption status.
* Change Data Rate Control slider color if minimum is selected.
* Preload Time-Series data from DB to reduce Latency of Dashboard API.
* Update settings app name and version copy.
* Update Traffic & Security main page.
* Update Adopt button and property-panel tabs.
* Update translations across the Application to match UniFi terminology.
* Update default DTIM period to 1 for 2.4GHz Radio.
* Remove \"Disable CCK Rates\" and \"Send beacons at 1Mbps\" from minimum rate controls.
* Remove PoE Detection/Duplex from property side panels.
* Remove Tags from the application.
* Hide speed test on WAN2 for USG.
* Change “Beta” to “UniFi Labs”.
* Clean up Notifications based on Statistics Data Retention settings.
* Consolidate multiple device firmware update notifications into one.
* Check device status more frequently during active admin sessions.
* Provide client usage over the last 24 hours in the endpoint.
* Implement UniFi Device Client property panel.
* Rename field translation for UniFi Device property panel. Bugfixes
* Add missing profile radius toast messages.
* Add missing UniFi clients in the clients page.
* Add missing device statuses to device filters.
* Add missing translation for USG Secondary Internet form.
* Add migration to update invalid hostname from UniFi OS.
* Fix issue where Peak Upload / Download Usage was reversed in Internet Settings.
* Fix device Isolation feature not working on UDM-Pro-SE consoles.
* Fix Backup is not respecting retention settings for Notifications and DPI statistics.
* Fix network selection modal during U-LTE-Pro adoption process.
* Fix adoption issues for U-LTE devices.
* Fix issue where user could see \"Trouble Page\" when going to WiFi AI.
* Fix unable to remove an administrator from sites on self-hosted applications.
* Fix issue when USP-Plug physical toggle couldn’t be switched.
* Fix issue where device uptime was incorrect.
* Fix client count not reflected correctly on the dashboard.
* Fix backup import from SD card on Cloud Key G2 Plus console.
* Fix cyclical device disconnecting/reconnecting.
* Fix devices with special states are not shown on the device page.
* Fix sorting issues in various locations.
* Fix device identification information not updated.
* Fix configuration error when static WAN does not specify router address.
* Fix WiFi experience feedback form cannot be submitted without comment.
* Fix graph missing when opening ISP panel.
* Fix timeout delay when deleting objects from the remote access portal.
* Fix restoring from backup.
* Fix MAC ID Filter list crashing.
* Fix topology property panel crash.
* Fix Display ISP name instead of the port name.
* Fix “Copy Configuration” options.
* Fix AP Groups Validation.
* Fix USG speed test not working.
* Fix newly adopted switches not having default night mode configuration.
* Fix issue with duplicated VPN clients.
* Fix Uplink Monitor Type selection indicator.
* Fix Device Firmware Schedule list.
* Fix typos in Settings.
* Fix dashboard ISP text and clients table styling issues.
* Fix styling for device manage section.
* Fix download logs not working on self-installed Applications.
* Fix logging to Ubiquiti Account in Settings.
* Fix dropdown labels in Firewall Rules form.
* Fix page crash in Threat Management when selecting specific dates.
* Fix scrolling for scrollable tables.
* Fix Display Option \"Restore Default\" functionality.
* Fix WiFi Band validation if some Devices have reached the SSID limit.
* Fix WAN form validation - Router field is required for Static connection.
* Fix false-positive WAN failover notifications.
* Fix which ethernet port is being advertised in UDM discovery.
* Fix showing offline devices as wireless on Topology.
* Fix page crash when opening WiFiman results.
* Fix WiFi Scan table SSID\'s.
* Fix navigation issue from device ports overview.
* Fix text overflowing in topology.
* Fix issue where WAN1\'s IP was used instead of active WAN.
* Fix DHCP AutoScale feature on UXG.
* Fix MAC Authorization form.
* Fix DNS resolution not working on LTE failover with Content Filtering enabled
* Fix missing IPS/VPN translations.
* Fix the product line URL in the property panel.
* Fix background color for UniFi Device Application link.
* Fix style for Client page display options, list only APs for device options.
* Remove disabled property from Fast Roaming toggle in WiFi settings.
* Log only new connections in Port Forward firewall rules.
* Disable logging in the default WAN_OUT firewall rules.
* Show correct version in device identification.
* Omit LTE IP from IP/subnet check in the network form.
* Dashboard side panel styling updates.
* No blocked_sta provisioned for low-resource models.
* Email notification does not have Adopt button.
* Tweak USW-Flex topology image.
* Client property panel styling fixes.
* Correct AP list for link aggregation.
* Create correct links for the port edit form.
* Show correct client status in grid view.
* Show only relevant fields for the USG dashboard.
* Show correct traffic amount in the dashboard for USG.
* Sync client icons for Table and Property Panel.
* Truncate actionable text that exceeds 30 characters.
* Do not display negative uptime.
* Update time format when changing 24/12h setting.
* Update Table headers to correctly display GHz.
* Use preferred time zone for AP Client history.
* Prevent dashboard WAN tabs stretching.
* Prevent Remote Access from being enabled on 32-bit systems where it is unsupported.
* Load UniFi translations in Topology.
* Clean up obsolete unsupported devices toast message.
* Remove debug terminal & jumbo frames/flow control from UDM.
* Mon Jun 21 2021 Herbert Graeber - Update to version 6.2.26 Bugfixes
* Fix unable to establish IPsec Site-to-Site VPN connection
* Wed Jun 16 2021 Herbert Graeber - Fix forcing java8- Modernize user creation
* Tue Jun 15 2021 Herbert Graeber - Make sure to use java8 even if another java version is installed- Make sure to switch to pkcs12 keystore, if using your own certificate
* Fri May 21 2021 Herbert Graeber - Update to version 6.2.25 Bugfixes
* Fix manual alerts migration issue for standalone setups.- Update to version 6.2.23 Improvements
* Add \"Off\" setting for Alerts notifications.
* Add Default and Custom Host fields for Override Inform Host feature (when it’s enabled) in Settings of Network Application running on UniFi OS Console.
* Split out Device Discovery alerts from Connection/Reconnection alerts.
* Throttle alerts: only one alert if downlink devices go offline/online.
* Allow dismissing UDM-Pro banner in dashboard page.
* Add \"Firmware version\" column to Devices page and change \"Version\" to \"Firmware Status\".
* Add alert that threat was detected or blocked.
* Add \'Sign Out\' button for Software installation controller.
* Add USW-Enterprise-24-PoE images.
* Add USP-RPS panel overview and port diagram.
* Add status indicators to Clients table.
* Add date range to Statistics.
* Add L3 Switch routing support for Static Route.
* Live update performance improvements in all pages.
* Improve Statistics page performance.
* Improve Hotspot form performance.
* Improve alert client fingerprinting.
* Remove frequent alerts after 14 days.
* Update WiFiman Topology in property panel.
* Update admin role names (Administrator, Site Admin, View only, Hotspot Operator).
* Update VPN section.
* Column visibility for Device and Client tables.
* Save table columns only when leaving page.
* Updates to side navigation icons.
* Utilization-bar tooltip style updates.
* Capitalize MAC and WLAN text used in property panel.
* Always send connection alert for clients.
* Move table row actions to forms.
* Update UAP property panel.
* Remove survey modals from Dashboard and Settings.
* Traffic section design updates.
* Implement Device and Outlets sections for USP-RPS property panel. Bugfixes
* Fix Up Pkts column header name in Clients table.
* Fix initial state of PMF Mode.
* Fix bar chart not aligned with time-series on hour change on Dashboard page.
* Fix not being able to save any changes in Settings.
* Fix static routes not provisioned when created from new settings.
* Fix Dashboard WiFi chart gap and displayed data range.
* Fix overlapping validation error in Site-to-Site VPN form.
* Fix settings loading issues for Non-UniFi OS applications.
* Use application timezone in all places.
* Hide \"Report Wrong Icon\" for UniFi devices.
* Add \"Add Internet Connection\" for setups with Gateway WAN2 support.
* Add UBB management VLAN field in property panel.
* Add debug terminal for USP-PDU-Pro.
* Add MSCHAP option for VPN settings.
* Add last used site to path on login.
* Always show unit for real-time throughput on Dashboard.
* Fix client bandwidth profile not shown correctly.
* Fix not working device upgrade action.
* Fix unnecessary alert when device was reconnected after backup.
* Fix issue saving static route with interface type.
* Fix backup restore from different UDM type.
* Fix AP unknown state after saving changes.
* Fix Network Isolation validation error.
* Fix initial state of Internet form values.
* Fix form validation and submission in UBB property panel.
* Fix device adoption from toast link.
* Fix displaying inconsistent port names.
* Fix returning list of L2TP VPN clients on UDM.
* Fix pinch to zoom in Topology in Safari.
* Fix Dashboard active clients total to represent selected timeframe.
* Fix admin login for self-hosted controllers.
* Fix inter-vlan network IP assignment order.
* Fix missing historical statistics for UDM wan port.
* Fix Statistics \"Total Traffic\" section\'s responsive style.
* Fix Statistics not loading on Standalone Controller.
* Fix redirect to Downlink device\'s property panel.
* Fix redirect to Uplink device\'s property panel.
* Fix realtime usage from jittering around in Dashboard.
* Fix missing ports and wrong port status tooltip text when disconnecting devices.
* Fix creating L2TP VPN network.
* Fix Hotspot Manager account login.
* Fix bar alignment in WiFi Experience graph on the Dashboard page.
* Fix size of WiFi Experience graph when Dashboard page loads.
* Fix showing hyphen for undefined uplink device.
* Fix Site-to-Site VPN with OpenVPN Protocol.
* Fix validation and opening existing VPN settings.
* Fix duplicated uplink/downlink in clients grid view.
* Fix displaying \"Uplink\" accordion with no uplink device data.
* Fix topology duplicates and improve expansion in WiFiman results.
* Fix missing WiFi Experience in client history.
* Fix Blocked Traffic direction dropdown.
* Fix Uplink / Downlink for Client and Device.
* Fix total sections on Statistics page.
* Fix displaying speed test results.
* Fix time format in Dashboard WiFi Experience chart.
* Fix missing WAN activity for UDM.
* Fix issue where wired clients do not show IP address.
* Fix opening Hotspot Manager for non-default sites.
* Recognize Cloud Key on Dashboard on UniFi OS without Gateway.
* Adjust spacing for Icon in Update Available button.
* Adjust statistics update frequency.
* Update displaying Experience in topology in WiFiman results.
* Update devices and clients page filtering logic.
* Update Experience in Client Table.
* Update Experience in Client and Device Property Panel.
* Disable Push Notification for Threat Detection and Prevention Alert Type by default.
* Hide utilization if no gateway is connected and update displayed info on dashboard.
* Hide experience graph for wired clients.
* Update logic in device state filter.
* Update internet icon in topology in WiFiman results.
* Disable adopt button while adopting.
* Prevent Vlan Only vlans from being generated for disabled SFP+ interfaces.
* Prevent selecting the same LAN network group on USG port remapping forms.
* Do not send device disconnect alert while doing auto backups.
* Device, Clients table column style update.
* Update app\'s header styling.
* Change \'Air Stats\' to \'Radios\' in RF section.
* Improve ISP info validation in Dashboard page for UCKP.
* Enable Cloud Email for Email Alerts when cloud access is enabled and SMTP is disabled.
* Show WAN port table for UDM in Property Panel.
* Remove dark lines from navigation panel and top bar in Dashboard.
* Remove Analytics toggle from Controller settings for UniFi OS setups.
* Remove anomalies in wireless devices/clients property panel, update no WiFi experience text.
* Remove invalid subscription Toast when forgetting U-LTE Pro.
* Present default table columns if there is a mismatch in saved configuration.
* Bring back devices page table experience column colored icons.
* Show WiFi experience for InWall APs and UDM in Devices table.
* Display Notes and Bandwidth profiles in New User Interface.
* Disable \'Forget Device\' option for UDM and UDM-Pro.
* Thu Mar 25 2021 Herbert Graeber - Update to version 6.1.71 Improvements
* Add new look and feel for all pages.
* Add new Alerts and Alert Settings.
* Add integration with WiFiman app.
* Update Push Notifications and Emails templates.
* Add WPA3 support.
* Add alert for Client roaming from AP to another AP.
* Add \"Clear Filter\" buttons when no content is displayed in Client and Device section.
* Add port aggregation fields in device port in Property Panel.
* Add redirect from speedtest to WAN form.
* Improve U-LTE Pro property panel sections.
* Update Client and Device NoContent component.
* Update default value for PMF Mode in WiFi form.
* Enable Cloud mail provider when enabling remote access if SMTP is not enabled.
* Improve Client Page performance.
* Preserve Uplink between controller restarts or when device becomes disconnected.
* Display device waiting for adoption without page reload.
* Block disconnect/reconnect alerts if device is upgrading firmware.
* Update metric suffixes used in Devices and Clients page. Bugfixes
* Fix device adoption from toast link.
* Fix login issues for Admins without access to the Default site.
* Fix legacy WLAN Schedules migration when it is disabled.
* Fix UDM shows as disconnected due to configuration error.
* Fix devices on WAN2 appearing in clients list.
* Fix missing WAN failover property on UXG.
* Fix device shown as disconnected during adoption.
* Fix Topology label sizes in Safari.
* Fix device icon in property panel for APs.
* Fix Device model name in WiFiman table and property panel topology.
* Fix property panel for disconnected devices.
* Fix Site Switcher, switch Site without page reload, save last used Site.
* Fix broken tooltips for Wireless Experience Score charts.
* Fix AP group creation for Non-UniFi OS controllers.
* Fix broken Device, Clients and Alerts page filter.
* Fix Client fingerprint and displayed data in 24HR usage column.
* Fix IPS dashboard map not loading.
* Fix UDM Base property panel device tab.
* Fix Topology node positioning for larger setups.
* Fix WPA3 Enhanced/192 remaining enabled after changing network security type.
* Fix configuration error when missing server certificate for WiFiman.
* Fix reporting performance issues for wired clients.
* Fix Column selection Popover position in Clients, WiFi Scanner, WiFiman tables.
* Fix switch and gateway discovery in Device table.
* Fix submitting changes in Property Panel for USG.
* Fix Offline Client fingerprint data when reported.
* Fix missing Network for WiFi created from the mobile app.
* Fix saving changes to historical clients.
* Fix Cloud Email toggle status.
* Fix duplicated rows for blocked clients.
* Fix SMTP Mail Server configuration.
* Fix topology labels overlapping the header in Safari.
* Fix empty space in Dashboard WiFi widget 5D view.
* Show correct tooltip in topology for USP-Plug/strip.
* Show correct \"No Content\" icon in Device page.
* Allow de-select Device in client filter dropdown.
* Remove empty space from Dashboard WiFi chart in 1 month view.
* Remove Client Blocked/Offline toggle.
* Truncate long names for devices and clients.
* Display correct VPN client filter number.
* Disable WiFi Schedule checkbox in classic UI.
* Hide WPA3 and OSEN Security options for WiFi - only in setups with UDM Base.
* Migrate WPA3 and WPA3/WPA2 Security options for WiFi to WPA2 option - only in setups with UDM Base.
* Prevent UDM WAN port edit as LAN port.
* Allow configuring port interfaces in gateway device property panel.
* Remove Safari rendering artefacts in topology while panning/zooming.
* Remove migrated disabled WLAN schedule entries (only for unmodified WiFi settings since 6.1.61).
* Add SFP+ ports to VLAN Only networks.
* Display Notes and Bandwidth profiles in New User Interface.
* Remove \'Forget Device\' option for UDM and UDM-Pro.
* Tue Feb 02 2021 Herbert Graeber - Update to version 6.0.45 Improvements
* Add Multi-Site Management toggle. (Not available for UDM-Base and UDM-Pro)
* Add WiFi, Hotspot, Network, Internet definition fields to search.
* Add a link to Hotspot Manager in new settings.
* Include Data Retention in search results.
* Move WiFi AI to Advanced Features.
* Clear Settings Search upon leaving Settings page.
* Scroll to validation error upon trying to submit a form that has invalid inputs.
* Update Property Panel for USP-Strip. Bugfixes
* Fix saving U-LTE configuration in classic Property Panel.
* Fix being unable to save WiFi RADIUS Authorization settings.
* Fix incorrect WiFi Experience in History tab in Client Property Panel.
* Fix broken positioning for Port Profile Storm Control warning icon.
* Fix being unable to open Threat Management.
* Fix Delay in Dashboard WiFi widget after removing all APs.
* Show Missing Security Protocol section in WiFi Network form.
* Display correct active client count for WiFi configurations on UDM setups.
* Disable VPN settings for L3 Networks.
* Remove Auto IPsec VTI for UDM/UXG.
* Filter out UBBs from clients list.
* Mon Dec 28 2020 Herbert Graeber - Update to version 6.0.43 Improvements
* Disable ATF toggle for certain devices.
* Add Advanced Feature Toggles, Data Rate Controls, MAC Authorisation in WiFi form.
* Rename Client Groups to Bandwidth Profiles.
* Display Site Switcher on Cloud Key with UniFi OS and multiple sites.
* Add an option to download server log file in new Settings. Bugfixes
* Fix provisioning WLAN changes for USP-Plug & USP-Strip and their uplinks.
* Fix adoption of USP-Plug & USP-Strip if user has separate 5GHz only WiFi.
* Fix issues during migration if Site has incorrect config.
* Fix Unknown device names in Cloud Emails.
* Fix Firmware cache table columns and their height.
* Fix overlapping column headers in Alert.
* Fix alerts page crashing.
* Fix event message rendering.
* Fix historical U-LTE data stat processing.
* Fix loading translations while using CORS.
* Fix models names for APs.
* Fix list of available backups to restore during the Setup of controller.
* Fix headings for UDM and UBB radio details.
* Fix blinking ports on UDM icon on Dashboard.
* Fix blinking IPs and text messages.
* Display Meshing settings only for last of 5GHz radios.
* Disable Bluetooth after Setup is completed on UDM-Pro.
* Resolve UCK-G2 identification issues.
* Migrate minimum RSSI settings to new range (from -67 to -90 dBm).
* Update minimum RSSI radio range in slider.
* Update UI for WiFi form Advanced section.
* Prevent deletion of WAN2 network on UXG-Pro.
* Sat Dec 05 2020 Herbert Graeber - Update to Version 6.0.41 Improvements
* Dashboard - Update \"Learn More\" URL for access points promotion if WiFi experience not available.
* Combine Radio accordions into one in property panel of AP.
* Add a banner in Beta Settings to allow reverting back to Classic Settings.
* Expose Advanced Features and Remove \"Enable advanced features\" checkbox in Classic Settings.
* Add Wifi, Hotspot, and AP Group membership overview info in property panel of APs.
* Rename Strict mode to Interference Blocker.
* Exclude Microsoft Edge from unsupported browsers
* Use device display names for User AP roaming notifications. Bugfixes
* Add missing Network Scanners in Security Settings for UXG.
* Resolve migration issues for users without DHCP Snooping setting in controller Database.
* Allow configuring USP devices which were adopted in versions older than 5.14.
* Fix UXG-Pro - cannot configure fixed IPs of clients (New Clients page).
* Fix DHCP Name Server is not properly saved in New Settings.
* Fix missing logs in support file for Cloud Key with UniFi OS.
* Fix missing clients on Dashboard.
* Fix missing Mobile Notifications and Cloud E-mails.
* Fix layout of grid view on Clients page.
* Fix timezone related runtime error causing crashes in New Dashboard.
* Fix the empty form for Radius Authentication Server.
* Fix showing no client if the WiFi Experience is 0.
* Fix showing disconnected wireless clients as wired clients.
* Fix GHz spelling.
* Update Minimum RSSI range.
* Update default state for fresh AP Meshing.
* Display Interference Block toggle only if Minimum RSSI enabled.
* Display \"Auto\" as default selected option in AP Uplink Priorities.
* Suppress events without proper handling.
* Clients Grid view design visual fixes.
* DNS server now can be deleted from WAN form.
* Show device alias in client grid if it\'s available.
* Show WiFi experience as N/A if no clients are connected.
* AP Radio advanced configuration adjustments.
* Allow toggling Guest Portal for Hotspots in Hotspot form.
* Prevent showing WiFi Experience over 100%
* Sat Nov 28 2020 Herbert Graeber - Fix the import-cert script
* Sat Nov 28 2020 Herbert Graeber - Because yast2-ca-mangement has gone long ago, don\'t rely on it anymore, leave Ubiquities certificate active as default.- Add a firewalld service file
* Fri Nov 20 2020 Herbert Graeber - Update to version 6.0.36 Improvements
* Add info and link to DHCP Relay in Network form.
* Add U6 device images.
* Add event handling for missing DHCP Relay Server.
* SSID byte length validation changed from 31 to 32.
* Improve the request to resolve fingerprint icon in Beta Clients page.
* Beta Settings - SSH section validation improvements.
* Free package trial rule updates.
* Enable New Settings & Clients pages by default. Bugfixes
* Fix peak client count being sometimes shown lower than current client count.
* Fix not being able to click Next button in Schedule Upgrade form.
* Fix being unable to save device SSH password, Allow hyphens in form validation of hostname.
* Fix a runtime error in new dashboard caused by unrecognised browsers timezone.
* Fix DPI App restrictions not getting applied when saved from New Settings.
* Fix form validation in New Settings for cases when hostname includes hyphens.
* Fix screen becoming blank when clicking \"cancel\" during AP edit or create.
* Fix Network Controller crashing the UniFi OS Portal upon quick navigation.
* Fix DHCP Relay link in network form.
* Fix Settings - Security - internet threat management page not opening on UCK.
* Fix users being unable to save Threat Management changes.
* Fix empty SSID from backup breaking WiFi form.
* Fix error occurring in network table parsing when disconnecting devices.
* Remove custom upgrade option for UDM.
* Remove endpoint scan from Clients.
* Allow to disable RADIUS without password.
* Table UX (width) fixes in Clients page.
* Use correct placeholder for UDM commit error notifications.
* VLAN settings are not provisioned for Wireless Uplink on UDM-Base.
* Don\'t count UAP\'s BSSIDs as clients.
* Enable Auto Scale Network for default network created during setup.
* Disable SSID action buttons upon initial click while controller is processing the request.
* Resolve the \'Module \"base-unifi\" is not available!\' error that appears when trying to load UniFi Network controller from the Remote Management Service.
* Ensure the correct content placeholder appears in Dashboard in place of WiFi Experience chart, if user has no APs adopted.
* Show a placeholder if users have no APs adopted.
* IAPP Key is not provisioned.
* Allow deleting WAN2 after restoring UDM-Pro backup on USG setup.
* Rectify the list of devices shown as unsupported for certain features.
* Close the survey modal 2 seconds after it has been submitted.
* WiFiman topology adjustments.
* Handle unsuccessful page loads in WiFiman page by displaying a Toast.
* Fri Oct 23 2020 Herbert Graeber - Update to version 6.0.28 Bugfixes
* Fix event handling for UDM-type devices.
* Skip invalid IP addresses when generating firewall rules to prevent reconnecting issue.
* Make Default AP Group read only- Update to version 6.0.27 Improvements
* Add data retention settings in Beta settings. Bugfixes
* Fix adding AP to AP Groups does not provision the AP that gets added.
* Fix unhandled Hotspot state in New Settings that resulted in error message.
* Fix Hotspot Secure Portal toggle to represent correct value in New Settings.
* Ensure new Hotspot is visible after creation in New Setting.
* Show SNMP setting for all devices in New Settings.
* Remove \"Default\" from \"All APs\" in WiFi/Hotspot AP Group configuration.
* Skip firewall rule generation for invalid NAT outbound addresses.- Update to version 6.0.26 Improvements
* Remove WiFi tutorial from Search.
* Add dot1x idle timeout for MAC-based mode. Bugfixes
* Fix manually changing subnet with a DHCP range in Network form.
* Fix restoring backup on UniFi OS systems.
* Fix backup range selection dropdown.
* Fix enabling/disabling WiFi networks that was resulting in open authentication.
* Fix WAN configuration if vlan is disabled.
* Fix not modifiable UAP settings after copying config.
* Fix missing leading slash in DDNS server config.
* Fix issues with navigating Search results in New Settings.
* Fix missing mapping to Network configuration in WLAN configuration when importing site.
* Fix VLANs beyond UAP wireless downlinks may not have connectivity.
* Remove unneeded prompt to save when Port Configuration form hasn\'t changed.
* Remove triplicated \"Network Protocols\" DPI categories in New Settings.
* Update VLAN only network validation to allow enabling IGMP Snooping.
* Ensure the toggle for analytics only appears on non UniFi OS systems.
* Show predefined firewall rules in New Settings.- Update to version 6.0.24 Improvements
* Remove WiFi tutorial from Search.
* Add dot1x idle timeout for MAC-based mode. Bugfixes
* Fix manually changing subnet with a DHCP range in Network form.
* Fix restoring backup on UniFi OS systems.
* Fix backup range selection dropdown.
* Fix enabling/disabling WiFi networks that was resulting in open authentication.
* Fix WAN configuration if vlan is disabled.
* Fix not modifiable UAP settings after copying config.
* Fix missing leading slash in DDNS server config.
* Fix issues with navigating Search results in New Settings.
* Fix missing mapping to Network configuration in WLAN configuration when importing site.
* Fix VLANs beyond UAP wireless downlinks may not have connectivity.
* Remove unneeded prompt to save when Port Configuration form hasn\'t changed.
* Remove triplicated \"Network Protocols\" DPI categories in New Settings.
* Update VLAN only network validation to allow enabling IGMP Snooping.
* Ensure the toggle for analytics only appears on non UniFi OS systems.
* Show predefined firewall rules in New Settings.
* Thu Sep 24 2020 Herbert Graeber - Update to version 6.0.23 Improvements
* Add MAC Address Filtering for WLAN.
* Limit maximum shown upload/download utilization to 100%. Bugfixes
* Fix Accordions in Beta Settings Networks from being unable to open.
* WiFi AI - fix excluded channels dropdown/list.
* System Settings -> Updates: use 24h format if it is set in system settings.
* Ensure DHCP Relay section can be found in search.
* Update AP Group form labels.
* Thu Sep 17 2020 Herbert Graeber - Update to version 6.0.22 Improvements
* Enable client statistics (option is no longer configurable).
* System Settings Design Updates, new Scheduled Upgrade Modal.
* Add sub page transitions.
* Do not allow changing timezone, hostname and controller name on UniFi OS.
* Improve Plug-and-Play adoption on UniFi OS.
* Add \"disabled\" option for PMF in Beta Settings. Bugfixes
* Remove VLAN Only networks with 0 VLAN tag and assign Default LAN Network to affected WiFi Networks. (fix may not help in all reported cases yet)
* Fix number of clients reported on dashboard.
* Fix hostname validation rule.
* Fix WAN IP uniqueness validation on save.
* Fix issues submitting site-to-site VPN Configuration in Beta Settings.
* Fix Creating VPN’s on UDM\'s (that could result in commit errors).
* Move \"Enable Smart Queues\" tooltip to label.
* Added error message for RADIUS secret length.
* Show Content Filtering for UDM and UXG family devices only.
* Get WLAN limit for each band separately in Beta Settings.
* Style and component fixes in property panel.
* Tue Sep 15 2020 Herbert Graeber - Update to version 6.0.20 New Features
* Introduce Beta Dashboard for UDM.
* Implement Real-Time statistics for UDM.
* Preview new Beta Settings.
* Redesign, simplify and move Site, Controller, Maintenance, Remote Access and Backup configuration to System Settings.
* Hide and auto-configure Data Retention for Statistics.
* Redesign and move Wi-Fi AI configuration to System Settings page.
* Redesign and move RADIUS and Switch Port profiles to Advanced Features page.
* Redesign and move Services to Advanced Gateway Settings to Advanced Features page.
* Move User Groups to Client Groups on Advanced Features page.
* Redesign and move Wireless Networks configuration to Wi-Fi page.
* Replace WLAN Groups with new AP Groups feature.
* Simplify WiFi creation - WPA2 Security protocol with Password is set by default.
* Allow selecting WPA2 Enterprise Security Protocol if at least one Radius profile is enabled.
* Change VLAN ID numeric input to Network dropdown.
* Integrate Guest Control with Hotspot configuration on Wi-Fi page.
* Redesign and move LAN Networks configuration to Networks page.
* Add Auto Scale Network feature.
* Move VLAN Only Networks to Network Isolation in Advanced Features.
* Update Content Filtering categories and move to Network configuration.
* Add new Device Isolation (creates guest network if turned on) and Internet Access (blocks WAN access if turned off) toggles.
* Redesign and move WAN Networks configuration to Internet page.
* Redesign and move DPI configuration to Security page.
* Redesign and move Threat Management configuration to Security page.
* Introduce AP Groups feature.
* AP Groups simplifies the way to configure Wi-Fi and arrange APs in logical groups.
* That feature is replacing WLAN Groups and WLAN Overrides. It’s a breaking change and some corner cases may not covered by migration.
* Some WLAN Group configurations have been migrated to individual Wi-Fi Network configurations.
* Preview Auto Scale Network feature.
* That feature automatically adjusts subnet size and DHCP range with avoiding network collision.
* Add ability to report incorrect Wi-Fi Experience.
* Add Survey for Beta Dashboard and Beta Settings. Improvements
* Add transition animations in Beta Settings.
* Add buttons for guest client authentication and unauthentication.
* Replace Speed test gauge with numbers.
* Move PMF to WLAN configuration in Beta Settings.
* Show AP promo placeholder in the new dashboard when there is no WiFi network created.
* Show Original vendor logos when device logo is unavailable.
* Remove Combine Name/SSID option from Settings.
* Improve the user experience of AP Group validation in Beta Settings. Bugfixes
* Fix Settings intro video not playing.
* Fix scrolling in Property panel in Beta Clients page.
* Fix Peak Usage in the New Dashboard.
* Fix width for columns in network table.
* Fix saving DHCP Relay mode for network.
* Fix stretched vendor logos on Beta Clients page.
* Fix available actions for editing Admins.
* Fix TxRate value on Clients page.
* Fix redirect URL in Cloud version of New Settings.
* Fix opening WLAN configuration page in New Settings.
* Fix DHCP initial values that made Cancel and Apply buttons show without making any changes.
* Fix Port Table value display.
* Fix problems with Device adoption.
* Fix visual style in client property panel Overview section.
* Fix selected columns not being saved in clients table.
* Fix multiple 404 errors.
* Fix Network configuration for LTE failover when there is no connected LTE device.
* Fix the \"go to old dashboard\" banner keeps reappearing after dismissal.
* Fix packet count formatting on Beta Clients page.
* Fix scrollbar style in Beta Settings
* Fix untoggable checkboxes in port configuration.
* Fix issues with WiFi Satisfaction graph on New Dashboard.
* Fix \"No Clients\" image position.
* Facebook authentication in Hotspot is not allowing HTTP redirects anymore.
* Add missing options for Hotspot SSID\'s.
* Provision access points with VLAN id\'s from all LAN configurations.
* Don\'t allow enabling Cloud Email without Remote Access enabled.
* Exclude U-LTE and USP-Plug from AP Group device list.
* Update create WiFi validation.
* Corrected MAC Filter table column widths.
* Wed Aug 26 2020 Herbert Graeber - Update to version 5.14.23 Bugfixes
* Remove false positive errors from controller logs.
* Fix overlapping firewall rule ID with port forward and DPI blocking enabled.
* Sun Aug 23 2020 Herbert Graeber - Update to version 5.14.22 Improvements
* Move Analytics & Improvements toggle to UniFi OS settings (applicable only for UniFi OS systems).
* Disable DnsFilterAlert and IpReputationBlock events by default.
* Add support for UXG-Pro.
* Add Switch Port anomalies.
* Add ability to report incorrect WiFi score.
* Set default DTIM interval to 3.
* Auto-backup should be enabled by default.
* Disable Element Adopt on Connectivity Disable.
* Improve logging for Hotspot RADIUS.
* Improve power cycle behavior for USP Plug.
* Improve logging errors.
* Update translations.
* Update LCM idle timeout. Bugfixes
* Do not include empty fingerprint stats.
* Do not prevent sending push notifications for generated events.
* Do not display false positive STUN warning.
* Do not use guest wifi for element adoption.
* Do not send unsupported push notifications.
* Do not report UDM-Pro as client.
* Do not send notifications for unknown events.
* Include missing active clients in some statistics.
* Prevent duplication of WAN2 network.
* Handle Ip Reputation Alerts.
* Fix operator frame not showing.
* Fix operator login URL.
* Fix wrong hotspot URL redirects.
* Fix incorrect admin invite emails.
* Fix the case when STP is enabled on the port however UI is showing it is being disabled.
* Fix UXG syslog going to incorrect IP/FQDN.
* Fix reporting traffic statistics for port 2 and 11 on UDM-Pro.
* Fix infinite redirects when trying to authorize guest on UAP.
* Fix firewall rules for Guest Portal on UDM.
* Fix creating hotspot operators.
* Fix saving tags.
* Fix batch delete vouchers.
* Fix saving configuring for USP Plug.
* Fix USP Plug adoption.
* Fix USP Plug power cycling.
* Fix crashing WiFi AI page in Beta Settings.
* Fix Error during processing Informs.
* Fix can’t complete Network setup because of missing max Auto Backup files number.
* Fix adoption of Protect cameras over Element Adoption SSID.
* Limit number of pending devices to not allow DoS attack.
* Limit Auto Backup files to 100.
* Speed tests should not block live-updates.
* Wed Jul 08 2020 Herbert Graeber - Update to version 5.13.32 Bugfixes
* Fix DPI statistics inaccuracy.
* Fix Port Forward Accounting Rules to not override User-Defined Rules.
* Fix provisioning issues when routes contain IPv6 addresses.
* Omit provisioning DHCP relay config where there are no DHCP server IPs configured.
* Provision PD correctly for UDM LANs pointing to WAN2.
* Provision UDM-Pro SFP+ port with the correct PVID in all cases.
* Fix adoption of Protect cameras over Element Adoption SSID.
* Do not show warning configuration has changed on admin invite.
* Tue Jun 16 2020 Herbert Graeber - Update to version 5.13.29 Features
* Add L3 switching features for USW-Pro series. Improvements
* Add support for MongoDB 3.6.
* Auto-optimize enables Wi-Fi AI.
* Prioritize busy times in Wi-Fi AI logic.
* Update Hotspot 2.0 for WFA requirements.
* Add VHT160 option for Japan.
* Show client icons on DPI and statistics pages.
* Improve SSID validation.
* Improve support for USP Plug.
* Allow adopting UBB only if both devices are connected.
* Allow changing VHT mode for 5GHz radio on UBB.
* Adjust speed test statistics to longer intervals.
* Add LTS notifications.
* Add Analytics & Improvements opt-in modal which is displayed post upgrade.
* Add description of SNMPv3 security options.
* Allow sending test emails via Cloud Email service.
* Make timezones dropdown searchable.
* Update IANA timezone database.
* Update inter-VLAN routing Network form.
* Remove OP mode from Port Profiles.
* Add MAC column to Insights/Known Clients.
* Update available IDS/IPS categories to lessen false positives and improve resource use.
* Rename UDM-Beacon to UAP-BeaconHD.
* Improve Property Panel for USW Leaf.
* Handle LCM sync event notifications on UDM.
* Support U-LTE on UDM devices.
* Support WAN failover for UDM devices.
* Add UDM boot sound checkbox.
* Various fixes and improvements in Beta Settings.
* Various performance improvements.
* Update translations and add missing events. Bugfixes
* Fix calculations for Radio Retry Rate and Dropped Percentage.
* Fix and improve Hotspot RADIUS accounting support.
* Fix unable to set LAN2/WAN2 port to WAN2 on USG3.
* Fix grayed out load balancing for USG.
* Fix multi-port port forwards missing ports.
* Fix provisioning configuration.
* Fix missing permissions for admins in mobile apps.
* Fix RADIUS Mac Authentication on UAP.
* Fix reordering firewall rules.
* Fix Guest Portal pre-authorization rules on UDM devices.
* Fix incorrect version redirect during UDM setup process.
* Fix displayed WAN IP under Networks for UDM devices.
* Fix firewall rule provisioning on UDM devices.
* Fix Guest Portal pre-authorization rules on UDM devices.
* Fix uplink-monitor crash on UDM devices.
* Fix WAN failover when using a PPPoE WAN on UDM devices.
* Fix Namecheap DDNS support on UDM series.
* Fix Switch Port Profile selection on the UDM-Pro property panel.
* Fix issues with Element Adoption.
* Fix device disconnected status if Element Adoption is enabled.
* Fix handling uplink stat for USP-Plug.
* Fix missing UBB LED configuration.
* Fix missing UBB link icon.
* Fix static DNS for U-LTE failover.
* Fix U-LTE redirect URL to unifi.ui.com.
* Fix rendering of U-LTE unreachable button.
* Fix unnecessary U-LTE device status unavailable notice.
* Fix validation to allow up to 6 ports for LACP on compatible UniFi Switch devices.
* Fix firmware cache for USF5P, USPRPS, US8.
* Fix false Disconnected status due to early timeout during device upgrade.
* Fix restoring large backups.
* Fix restore to default issue on Windows.
* Fix upgrade firmware from controller.
* Fix import of Site.
* Fix busy state for buttons.
* Fix missing IPS widget on Dashboard.
* Fix Rx/Tx columns on the Device page.
* Fix displaying ports in the Utilization column at the Device page.
* Restore virtual device images on Map page.
* Fix client count in Insights Statistics page.
* Fix saving firewall rules in Settings.
* Fix Last 1 Hour filter for Past Guest Authorizations.
* Fix empty neighboring AP list.
* Fix broken Analytics in Hotspot Manager.
* Fix redirect when choosing Enable Threat Management in Beta Settings.
* Fix missing images in Beta Settings.
* Fix updating status of Network controller on network.unifi.ui.com.
* Fix Debug Terminal during Remote Access.
* Fix site switching during Remote Access.
* Fix Wi-Fi AI page crash during Remote Access.
* Fix enabling Remote Access if 2FA is enabled for SSO.
* Fix missing Events for Auto Optimize feature.
* Fix Push Notifications for many admins with the same preferred language.
* Fix missing Backup and Restore actions for Cloud Controllers.
* Fix inconsistent vap error in controller logs.
* Fix broken WebSocket connection in UI.
* Fix downloading device info.
* Remove non-functional Restart Device permissions and allow for Site/Super admins only.
* Skip analytics provisioning on old firmware to mitigate unnecessary downtime.
* Regenerate self-signed certificates for existing installations to meet Apple\'s new rules (see Apple\'s article HERE).
* Wed Mar 25 2020 Herbert Graeber - Update to version 5.12.66 Features
* Add VHT160 option for Japan.
* USP-Plug support. Improvements
* Allow changing VHT mode for 5GHz radio on UniFi Building Bridge.
* Allow sending test emails via cloud email service.
* Update available IDS/IPS categories to lessen false positives and improve resource use.
* Add Antigua and Barbuda to regions.
* Allow disabling element adopt in Connectivity Monitor settings.
* Display UBB Bridge as one element.
* Improve wording in Connectivity Monitor settings.
* Replace n/a to dash.
* Update New Settings.
* Use the device model as the default element name instead of MAC. Bugfixes
* Fix and improve Hotspot RADIUS accounting support.
* Fix false Disconnected status due to early timeout during device upgrade.
* Fix redirect to incorrect controller version on unifi.ui.com.
* Fix rendering of LTE unreachable button.
* Fix bug causing custom columns to reset on browser refresh.
* Fix blinking header in Settings/Services.
* Fix broken UI validation for comma-separated port range.
* Fix displaying terminal accordion.
* Fix empty channel for UBB.
* Fix filter for last hour.
* Fix Guest Portal on separate VLAN.
* Fix icons on mapsFix unnecessary LTE device status unavailable notice.
* Fix wired client experience graph is always zero.
* Fix uploading images over webrtc.
* Fix saving changes in Network tab in device property panel.
* Allow up to 6 ports to be in an aggregation.
* Skip analytics provisioning on old firmware to mitigate unnecessary downtime.
* Show LTE notifications only when the device is adopted.
* Adopt ULTE on Cloud Controllers.
* Cannot change User Group for Client.
* Incorrect device memory usage in side property panel.
* Link aggregation option not visible on UAP HD.
* Map Virtual Devices multiplying on drag.
* Refresh notifications settings after save.
* Selecting None for Native Network shows empty box in switch port profile.
* Test SMTP email button not working.