|
|
|
|
Changelog for gsi-openssh-common-8.4p1-165.195.x86_64.rpm :
* Thu Apr 15 2021 Frank Scheiner - Base GSI-OpenSSH on OpenSSH version of Tumbleweed * Wed Feb 24 2021 Thorsten Kukuk - Add support for vendor provided configuration files in /usr/share/ssh/ (openssh-8.4p1-vendordir.patch)- Move configuration files from /etc/ssh/ to /usr/share/ssh/ * Mon Feb 15 2021 Hans Petter Jansson - Add openssh-whitelist-syscalls.patch (bsc#1182232), fixing failure to accept connections on 32-bit platforms with glibc 2.33+. * Wed Jan 27 2021 Thorsten Kukuk - Add support for /etc/ssh/ssh_config.d and /etc/ssh/sshd_config.d (openssh-8.4p1-ssh_config_d.patch) * Sat Jan 23 2021 Hans Petter Jansson - Add openssh-fix-ssh-copy-id.patch, which fixes breakage introduced in 8.4p1 (bsc#1181311). * Fri Jan 22 2021 Hans Petter Jansson - Improve robustness of sshd init detection when upgrading from a pre-systemd distribution. * Fri Jan 22 2021 Hans Petter Jansson - Add openssh-reenable-dh-group14-sha1-default.patch, which adds diffie-hellman-group14-sha1 key exchange back to the default list (bsc#1180958). This is needed for backwards compatibility with older platforms. * Fri Jan 22 2021 Hans Petter Jansson - Make sure sshd is enabled correctly when upgrading from a pre-systemd distribution (bsc#1180083). * Mon Jan 18 2021 Thorsten Kukuk - sysusers-sshd.conf: use sysusers.d configuration file to create sshd user (avoid hard dependency on shadow). * Mon Jan 18 2021 Dirk Müller - update to 8.4p1: Security ======== * ssh-agent(1): restrict ssh-agent from signing web challenges for FIDO/U2F keys. * ssh-keygen(1): Enable FIDO 2.1 credProtect extension when generating a FIDO resident key. * ssh(1), ssh-keygen(1): support for FIDO keys that require a PIN for each use. These keys may be generated using ssh-keygen using a new \"verify-required\" option. When a PIN-required key is used, the user will be prompted for a PIN to complete the signature operation. New Features - ----------- * sshd(8): authorized_keys now supports a new \"verify-required\" option to require FIDO signatures assert that the token verified that the user was present before making the signature. The FIDO protocol supports multiple methods for user-verification, but currently OpenSSH only supports PIN verification. * sshd(8), ssh-keygen(1): add support for verifying FIDO webauthn signatures. Webauthn is a standard for using FIDO keys in web browsers. These signatures are a slightly different format to plain FIDO signatures and thus require explicit support. * ssh(1): allow some keywords to expand shell-style ${ENV} environment variables. The supported keywords are CertificateFile, ControlPath, IdentityAgent and IdentityFile, plus LocalForward and RemoteForward when used for Unix domain socket paths. bz#3140 * ssh(1), ssh-agent(1): allow some additional control over the use of ssh-askpass via a new $SSH_ASKPASS_REQUIRE environment variable, including forcibly enabling and disabling its use. bz#69 * ssh(1): allow ssh_config(5)\'s AddKeysToAgent keyword accept a time limit for keys in addition to its current flag options. Time- limited keys will automatically be removed from ssh-agent after their expiry time has passed. * scp(1), sftp(1): allow the -A flag to explicitly enable agent forwarding in scp and sftp. The default remains to not forward an agent, even when ssh_config enables it. * ssh(1): add a \'%k\' TOKEN that expands to the effective HostKey of the destination. This allows, e.g., keeping host keys in individual files using \"UserKnownHostsFile ~/.ssh/known_hosts.d/%k\". bz#1654 * ssh(1): add %-TOKEN, environment variable and tilde expansion to the UserKnownHostsFile directive, allowing the path to be completed by the configuration (e.g. bz#1654) * ssh-keygen(1): allow \"ssh-add -d -\" to read keys to be deleted from stdin. bz#3180 * sshd(8): improve logging for MaxStartups connection throttling. sshd will now log when it starts and stops throttling and periodically while in this state. bz#3055 Bugfixes - ------- * ssh(1), ssh-keygen(1): better support for multiple attached FIDO tokens. In cases where OpenSSH cannot unambiguously determine which token to direct a request to, the user is now required to select a token by touching it. In cases of operations that require a PIN to be verified, this avoids sending the wrong PIN to the wrong token and incrementing the token\'s PIN failure counter (tokens effectively erase their keys after too many PIN failures). * sshd(8): fix Include before Match in sshd_config; bz#3122 * ssh(1): close stdin/out/error when forking after authentication completes (\"ssh -f ...\") bz#3137 * ssh(1), sshd(8): limit the amount of channel input data buffered, avoiding peers that advertise large windows but are slow to read from causing high memory consumption. * ssh-agent(1): handle multiple requests sent in a single write() to the agent. * sshd(8): allow sshd_config longer than 256k * sshd(8): avoid spurious \"Unable to load host key\" message when sshd load a private key but no public counterpart * ssh(1): prefer the default hostkey algorithm list whenever we have a hostkey that matches its best-preference algorithm. * sshd(1): when ordering the hostkey algorithms to request from a server, prefer certificate types if the known_hosts files contain a key marked as a AATTcert-authority; bz#3157 * ssh(1): perform host key fingerprint comparisons for the \"Are you sure you want to continue connecting (yes/no/[fingerprint])?\" prompt with case sensitivity. * sshd(8): ensure that address/masklen mismatches in sshd_config yield fatal errors at daemon start time rather than later when they are evaluated. * ssh-keygen(1): ensure that certificate extensions are lexically sorted. Previously if the user specified a custom extension then the everything would be in order except the custom ones. bz#3198 * ssh(1): also compare username when checking for JumpHost loops. bz#3057 * ssh-keygen(1): preserve group/world read permission on known_hosts files across runs of \"ssh-keygen -Rf /path\". The old behaviour was to remove all rights for group/other. bz#3146 * ssh-keygen(1): Mention the [-a rounds] flag in the ssh-keygen manual page and usage(). * sshd(8): explicitly construct path to ~/.ssh/rc rather than relying on it being relative to the current directory, so that it can still be found if the shell startup changes its directory. bz#3185 * sshd(8): when redirecting sshd\'s log output to a file, undo this redirection after the session child process is forked(). Fixes missing log messages when using this feature under some circumstances. * sshd(8): start ClientAliveInterval bookkeeping before first pass through select() loop; fixed theoretical case where busy sshd may ignore timeouts from client. * ssh(1): only reset the ServerAliveInterval check when we receive traffic from the server and ignore traffic from a port forwarding client, preventing a client from keeping a connection alive when it should be terminated. bz#2265 * ssh-keygen(1): avoid spurious error message when ssh-keygen creates files outside ~/.ssh * sftp-client(1): fix off-by-one error that caused sftp downloads to make one more concurrent request that desired. This prevented using sftp(1) in unpipelined request/response mode, which is useful when debugging. bz#3054 * ssh(1), sshd(8): handle EINTR in waitfd() and timeout_connect() helpers. bz#3071 * ssh(1), ssh-keygen(1): defer creation of ~/.ssh until we attempt to write to it so we don\'t leave an empty .ssh directory when it\'s not needed. bz#3156 * ssh(1), sshd(8): fix multiplier when parsing time specifications when handling seconds after other units. bz#3171 * Fri Jan 08 2021 Hans Petter Jansson - Update openssh-8.1p1-audit.patch (bsc#1180501). This fixes occasional crashes on connection termination caused by accessing freed memory. * Fri Nov 27 2020 Thorsten Kukuk - Support /usr/etc/pam.d * Wed Nov 11 2020 Hans Petter Jansson - Fix build breakage caused by missing security key objects: + Modify openssh-7.7p1-cavstest-ctr.patch. + Modify openssh-7.7p1-cavstest-kdf.patch. + Add openssh-link-with-sk.patch. * Wed Nov 11 2020 Hans Petter Jansson - Add openssh-fips-ensure-approved-moduli.patch (bsc#1177939). This ensures only approved DH parameters are used in FIPS mode. * Wed Nov 11 2020 Hans Petter Jansson - Add openssh-8.1p1-ed25519-use-openssl-rng.patch (bsc#1173799). This uses OpenSSL\'s RAND_bytes() directly instead of the internal ChaCha20-based implementation to obtain random bytes for Ed25519 curve computations. This is required for FIPS compliance. * Thu Oct 08 2020 Hans Petter Jansson - Work around %service_add_post disabling sshd on upgrade with package name change (bsc#1177039). * Fri Sep 25 2020 Dominique Leuenberger - Fix fillup-template usage: + %post server needs to reference ssh (not sshd), which matches the sysconfig.ssh file name the package ships. + %post client does not need any fillup_ calls, as there is no client-relevant sysconfig file present. The naming of the sysconfig file (ssh instead of sshd) is unfortunate. * Fri Sep 25 2020 Franck Bui - Use of DISABLE_RESTART_ON_UPDATE is deprecated. Replace it with %service_del_postun_without_restart * Thu Sep 17 2020 Jan Engelhardt - Move some Requires to the right subpackage.- Avoid \">&\" bashism in %post.- Upgrade some old specfile constructs/macros and drop unnecessary %{?systemd_ *}.- Trim descriptions and straighten out the grammar. * Thu Sep 10 2020 Hans Petter Jansson - Split openssh package into openssh, openssh-common, openssh-server and openssh-clients. This allows for the ssh clients to be installed without the server component (bsc#1176434). * Fri Jun 05 2020 Hans Petter Jansson - Version update to 8.3p1: = Potentially-incompatible changes * sftp(1): reject an argument of \"-1\" in the same way as ssh(1) and scp(1) do instead of accepting and silently ignoring it. = New features * sshd(8): make IgnoreRhosts a tri-state option: \"yes\" to ignore rhosts/shosts, \"no\" allow rhosts/shosts or (new) \"shosts-only\" to allow .shosts files but not .rhosts. * sshd(8): allow the IgnoreRhosts directive to appear anywhere in a sshd_config, not just before any Match blocks. * ssh(1): add %TOKEN percent expansion for the LocalFoward and RemoteForward keywords when used for Unix domain socket forwarding. * all: allow loading public keys from the unencrypted envelope of a private key file if no corresponding public key file is present. * ssh(1), sshd(8): prefer to use chacha20 from libcrypto where possible instead of the (slower) portable C implementation included in OpenSSH. * ssh-keygen(1): add ability to dump the contents of a binary key revocation list via \"ssh-keygen -lQf /path\".- Additional changes from 8.2p1 release: = Potentially-incompatible changes * ssh(1), sshd(8), ssh-keygen(1): this release removes the \"ssh-rsa\" (RSA/SHA1) algorithm from those accepted for certificate signatures (i.e. the client and server CASignatureAlgorithms option) and will use the rsa-sha2-512 signature algorithm by default when the ssh-keygen(1) CA signs new certificates. * ssh(1), sshd(8): this release removes diffie-hellman-group14-sha1 from the default key exchange proposal for both the client and server. * ssh-keygen(1): the command-line options related to the generation and screening of safe prime numbers used by the diffie-hellman-group-exchange- * key exchange algorithms have changed. Most options have been folded under the -O flag. * sshd(8): the sshd listener process title visible to ps(1) has changed to include information about the number of connections that are currently attempting authentication and the limits configured by MaxStartups. * ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F support to provide address-space isolation for token middleware libraries (including the internal one). It needs to be installed in the expected path, typically under /usr/libexec or similar. = New features * This release adds support for FIDO/U2F hardware authenticators to OpenSSH. U2F/FIDO are open standards for inexpensive two-factor authentication hardware that are widely used for website authentication. In OpenSSH FIDO devices are supported by new public key types \"ecdsa-sk\" and \"ed25519-sk\", along with corresponding certificate types. * sshd(8): add an Include sshd_config keyword that allows including additional configuration files via glob(3) patterns. * ssh(1)/sshd(8): make the LE (low effort) DSCP code point available via the IPQoS directive. * ssh(1): when AddKeysToAgent=yes is set and the key contains no comment, add the key to the agent with the key\'s path as the comment. * ssh-keygen(1), ssh-agent(1): expose PKCS#11 key labels and X.509 subjects as key comments, rather than simply listing the PKCS#11 provider library path. * ssh-keygen(1): allow PEM export of DSA and ECDSA keys. * ssh(1), sshd(8): make zlib compile-time optional, available via the Makefile.inc ZLIB flag on OpenBSD or via the --with-zlib configure option for OpenSSH portable. * sshd(8): when clients get denied by MaxStartups, send a notification prior to the SSH2 protocol banner according to RFC4253 section 4.2. * ssh(1), ssh-agent(1): when invoking the $SSH_ASKPASS prompt program, pass a hint to the program to describe the type of desired prompt. The possible values are \"confirm\" (indicating that a yes/no confirmation dialog with no text entry should be shown), \"none\" (to indicate an informational message only), or blank for the original ssh-askpass behaviour of requesting a password/phrase. * ssh(1): allow forwarding a different agent socket to the path specified by $SSH_AUTH_SOCK, by extending the existing ForwardAgent option to accepting an explicit path or the name of an environment variable in addition to yes/no. * ssh-keygen(1): add a new signature operations \"find-principals\" to look up the principal associated with a signature from an allowed- signers file. * sshd(8): expose the number of currently-authenticating connections along with the MaxStartups limit in the process title visible to \"ps\".- Rebased patches: * openssh-7.7p1-cavstest-ctr.patch * openssh-7.7p1-cavstest-kdf.patch * openssh-7.7p1-fips.patch * openssh-7.7p1-fips_checks.patch * openssh-7.7p1-ldap.patch * openssh-7.7p1-no_fork-no_pid_file.patch * openssh-7.7p1-sftp_print_diagnostic_messages.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.1p1-seccomp-clock_nanosleep.patch- Removed openssh-7.7p1-seed-prng.patch (bsc#1165158). * Sun May 31 2020 Andreas Stieger - add upstream signing key to actually verify source signature * Fri Feb 28 2020 Ludwig Nussel - Don\'t recommend xauth to avoid pulling in X. * Tue Feb 18 2020 Fabian Vogt - Add patches to fix the sandbox blocking glibc on 32bit platforms (boo#1164061): * openssh-8.1p1-seccomp-clock_nanosleep_time64.patch * openssh-8.1p1-seccomp-clock_gettime64.patch * Tue Feb 11 2020 Hans Petter Jansson - Add openssh-8.1p1-use-openssl-kdf.patch (jsc#SLE-9443). This performs key derivation using OpenSSL\'s SSHKDF facility, which allows OpenSSH to benefit from the former\'s FIPS certification status. * Thu Nov 21 2019 Hans Petter Jansson - Make sure ssh-keygen runs if SSHD_AUTO_KEYGEN variable is unset or contains an unrecognized value (bsc#1157176). * Fri Nov 08 2019 Cristian Rodríguez - Add openssh-8.1p1-seccomp-clock_nanosleep.patch, allow clock_nanosleep glibc master implements multiple functions using that syscall making the privsep sandbox kill the preauth process. * Thu Oct 17 2019 Hans Petter Jansson - Update openssh-7.7p1-audit.patch to fix crash (bsc#1152730). Fix by Enzo Matsumiya (ematsumiyaAATTsuse.com). This was integrated in a separate code stream merged with the Oct. 10 update; the patch was also rebased and renamed to openssh-8.1p1-audit.patch. * Mon Oct 14 2019 Hans Petter Jansson - Add openssh-7.9p1-keygen-preserve-perms.patch (bsc#1150574). This attempts to preserve the permissions of any existing known_hosts file when modified by ssh-keygen (for instance, with -R).- Added openssh-7.9p1-revert-new-qos-defaults.patch, which reverts an upstream commit that caused compatibility issues with other software (bsc#1136402). * Mon Oct 14 2019 Hans Petter Jansson - Run \'ssh-keygen -A\' on startup only if SSHD_AUTO_KEYGEN=\"yes\" in /etc/sysconfig/ssh. This is set to \"yes\" by default, but can be changed by the system administrator (bsc#1139089). * Mon Oct 14 2019 Hans Petter Jansson - Add openssh-7.9p1-keygen-preserve-perms.patch (bsc#1150574). This attempts to preserve the permissions of any existing known_hosts file when modified by ssh-keygen (for instance, with -R). * Thu Oct 10 2019 Hans Petter Jansson - Version update to 8.1p1: * ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. Certificates signed by RSA keys will therefore be incompatible with OpenSSH versions prior to 7.2 unless the default is overridden (using \"ssh-keygen -t ssh-rsa -s ...\"). * ssh(1): Allow %n to be expanded in ProxyCommand strings * ssh(1), sshd(8): Allow prepending a list of algorithms to the default set by starting the list with the \'^\' character, E.g. \"HostKeyAlgorithms ^ssh-ed25519\" * ssh-keygen(1): add an experimental lightweight signature and verification ability. Signatures may be made using regular ssh keys held on disk or stored in a ssh-agent and verified against an authorized_keys-like list of allowed keys. Signatures embed a namespace that prevents confusion and attacks between different usage domains (e.g. files vs email). * ssh-keygen(1): print key comment when extracting public key from a private key. * ssh-keygen(1): accept the verbose flag when searching for host keys in known hosts (i.e. \"ssh-keygen -vF host\") to print the matching host\'s random-art signature too. * All: support PKCS8 as an optional format for storage of private keys to disk. The OpenSSH native key format remains the default, but PKCS8 is a superior format to PEM if interoperability with non-OpenSSH software is required, as it may use a less insecure key derivation function than PEM\'s.- Additional changes from 8.0p1 release: * scp(1): Add \"-T\" flag to disable client-side filtering of server file list. * sshd(8): Remove support for obsolete \"host/port\" syntax. * ssh(1), ssh-agent(1), ssh-add(1): Add support for ECDSA keys in PKCS#11 tokens. * ssh(1), sshd(8): Add experimental quantum-computing resistant key exchange method, based on a combination of Streamlined NTRU Prime 4591^761 and X25519. * ssh-keygen(1): Increase the default RSA key size to 3072 bits, following NIST Special Publication 800-57\'s guidance for a 128-bit equivalent symmetric security level. * ssh(1): Allow \"PKCS11Provider=none\" to override later instances of the PKCS11Provider directive in ssh_config, * sshd(8): Add a log message for situations where a connection is dropped for attempting to run a command but a sshd_config ForceCommand=internal-sftp restriction is in effect. * ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for \"yes\". This allows the user to paste a fingerprint obtained out of band at the prompt and have the client do the comparison for you. * ssh-keygen(1): When signing multiple certificates on a single command-line invocation, allow automatically incrementing the certificate serial number. * scp(1), sftp(1): Accept -J option as an alias to ProxyJump on the scp and sftp command-lines. * ssh-agent(1), ssh-pkcs11-helper(8), ssh-add(1): Accept \"-v\" command-line flags to increase the verbosity of output; pass verbose flags though to subprocesses, such as ssh-pkcs11-helper started from ssh-agent. * ssh-add(1): Add a \"-T\" option to allowing testing whether keys in an agent are usable by performing a signature and a verification. * sftp-server(8): Add a \"lsetstatAATTopenssh.com\" protocol extension that replicates the functionality of the existing SSH2_FXP_SETSTAT operation but does not follow symlinks. * sftp(1): Add \"-h\" flag to chown/chgrp/chmod commands to request they do not follow symlinks. * sshd(8): Expose $SSH_CONNECTION in the PAM environment. This makes the connection 4-tuple available to PAM modules that wish to use it in decision-making. * sshd(8): Add a ssh_config \"Match final\" predicate Matches in same pass as \"Match canonical\" but doesn\'t require hostname canonicalisation be enabled. * sftp(1): Support a prefix of \'AATT\' to suppress echo of sftp batch commands. * ssh-keygen(1): When printing certificate contents using \"ssh-keygen -Lf /path/certificate\", include the algorithm that the CA used to sign the cert.- Rebased patches: * openssh-7.7p1-IPv6_X_forwarding.patch * openssh-7.7p1-X_forward_with_disabled_ipv6.patch * openssh-7.7p1-cavstest-ctr.patch * openssh-7.7p1-cavstest-kdf.patch * openssh-7.7p1-disable_openssl_abi_check.patch * openssh-7.7p1-fips.patch * openssh-7.7p1-fips_checks.patch * openssh-7.7p1-hostname_changes_when_forwarding_X.patch * openssh-7.7p1-ldap.patch * openssh-7.7p1-seed-prng.patch * openssh-7.7p1-sftp_force_permissions.patch * openssh-7.7p1-sftp_print_diagnostic_messages.patch * openssh-8.0p1-gssapi-keyex.patch (formerly openssh-7.7p1-gssapi_key_exchange.patch) * openssh-8.1p1-audit.patch (formerly openssh-7.7p1-audit.patch)- Removed patches (integrated upstream): * 0001-upstream-Fix-two-race-conditions-in-sshd-relating-to.patch * openssh-7.7p1-seccomp_ioctl_s390_EP11.patch * openssh-7.9p1-CVE-2018-20685.patch * openssh-7.9p1-brace-expansion.patch * openssh-CVE-2019-6109-force-progressmeter-update.patch * openssh-CVE-2019-6109-sanitize-scp-filenames.patch * openssh-CVE-2019-6111-scp-client-wildcard.patch- Removed patches (obsolete): * openssh-openssl-1_0_0-compatibility.patch * Mon Aug 19 2019 kukukAATTsuse.de- don\'t install SuSEfirewall2 service on Factory, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html * Mon Jul 22 2019 Fabian Vogt - ssh-askpass: Try a fallback if the other option is not available * Fri May 31 2019 Vítězslav Čížek - Fix a crash with GSSAPI key exchange (bsc#1136104) * modify openssh-7.7p1-gssapi_key_exchange.patch * Thu Mar 28 2019 Vítězslav Čížek - Fix a double free() in the KDF CAVS testing tool (bsc#1065237) * modify openssh-7.7p1-cavstest-kdf.patch * Tue Mar 12 2019 Vítězslav Čížek - Minor clean-up of the fips patches, modified openssh-7.7p1-fips.patch openssh-7.7p1-fips_checks.patch * Mon Mar 11 2019 Vítězslav Čížek - Fix two race conditions in sshd relating to SIGHUP (bsc#1119183) * 0001-upstream-Fix-two-race-conditions-in-sshd-relating-to.patch * Thu Feb 28 2019 Vítězslav Čížek - Correctly filter out non-compliant algorithms when in FIPS mode (bsc#1126397) * A hunk was applied to a wrong place due to a patch fuzz when the fips patch was being ported to openssh 7.9p1- update openssh-7.7p1-fips.patch * Wed Feb 27 2019 Vítězslav Čížek - Remove the \"KexDHMin\" config keyword (bsc#1127180) It used to allow lowering of the minimal allowed DH group size, which was increased to 2048 by upstream in the light of the Logjam attack. The code was broken since the upgrade to 7.6p1, but nobody noticed. As apparently no one needs the functionality any more, let\'s drop the patch. It\'s still possible to use the fixed 1024-bit diffie-hellman-group1-sha1 key exchange method when working with legacy systems.- drop openssh-7.7p1-disable_short_DH_parameters.patch- updated patches: openssh-7.7p1-fips.patch openssh-7.7p1-fips_checks.patch openssh-7.7p1-gssapi_key_exchange.patch * Mon Feb 18 2019 Pedro Monreal Gonzalez - Handle brace expansion in scp when checking that filenames sent by the server side match what the client requested [bsc#1125687] * openssh-7.9p1-brace-expansion.patch * Thu Feb 14 2019 Pedro Monreal Gonzalez - Updated security fixes: * [bsc#1121816, CVE-2019-6109] Sanitize scp filenames via snmprintf and have progressmeter force an update at the beginning and end of each transfer. Added patches: - openssh-CVE-2019-6109-sanitize-scp-filenames.patch - openssh-CVE-2019-6109-force-progressmeter-update.patch * [bsc#1121821, CVE-2019-6111] Check in scp client that filenames sent during remote->local directory copies satisfy the wildcard specified by the user. Added patch: - openssh-CVE-2019-6111-scp-client-wildcard.patch * Removed openssh-7.9p1-scp-name-validator.patch * Thu Feb 14 2019 Tomáš Chvátal - Change the askpass wrapper to not use x11 interface: * by default we use the -gnome UI (which is gtk3 only, no gnome dep) * if desktop is KDE/LxQt we use ksshaskpass * Mon Jan 28 2019 Pedro Monreal Gonzalez - Remove old conditionals * Fri Jan 25 2019 Pedro Monreal Gonzalez - Move ssh-ldap * man pages into openssh-helpers [bsc#1051531] * Thu Jan 24 2019 Pedro Monreal Gonzalez - Allow root login by default [bsc#1118114, bsc#1121196] * Added/updated previous patch openssh-7.7p1-allow_root_password_login.patch * Mention the change in README.SUSE * Thu Jan 24 2019 Pedro Monreal Gonzalez - Added SLE conditionals in the spec files: * Keep gtk2-devel in openssh-askpass-gnome in SLE * Keep krb5-mini-devel in SLE- Removed obsolete configure options: * SSH protocol 1 --with-ssh1 * Smart card --with-opensc- Cleaned spec file with spec-cleaner * Wed Jan 16 2019 Pedro Monreal Gonzalez - Security fix: * [bsc#1121816, CVE-2019-6109] scp client spoofing via object name * [bsc#1121818, CVE-2019-6110] scp client spoofing via stderr * [bsc#1121821, CVE-2019-6111] scp client missing received object name validation * Added patch openssh-7.9p1-scp-name-validator.patch * Fri Jan 11 2019 Pedro Monreal Gonzalez - Security fix: [bsc#1121571, CVE-2018-20685] * The scp client allows remote SSH servers to bypass intended access restrictions * Added patch openssh-7.9p1-CVE-2018-20685.patch * Thu Jan 03 2019 Pedro Monreal Gonzalez - Added compatibility with SuSEfirewall2 [bsc#1118044]
|
|
|