Changelog for libupsclient1-2.7.4-4.1.i586.rpm :

* Thu Apr 03 2014 sbrabecAATTsuse.cz- Replace powersave support by systemd (bnc#871406).
* Thu Mar 27 2014 roAATTsuse.de- explicitly require udev to fix buildenvironment issues
* Fri Feb 14 2014 sbrabecAATTsuse.cz- Replace pm-utils support by systemd (FATE#316824).
* Tue Nov 26 2013 sbrabecAATTsuse.cz- Update to version 2.7.1: For more see NEWS and UPGRADING in /usr/share/doc/packages/nut. Potentially incompatible changes:
* First release after the transition from Subversion to Git.
* The linkman:apcsmart[8] driver has been replaced by a new implementation. There is a new parameter, \'ttymode\'. In case of issues with this new version, users can revert to apcsmart-old.
* The linkman:nutdrv_qx[8] driver will eventually supersede blazer_ser and blazer_usb. Options are not exactly the same, but are documented in the nutdrv_qx man page.
* Mozilla NSS support has been added.
* linkman:upsrw[8] now prints out the maximum size of variables. Other changes:
* Added a new driver, nutdrv_qx, for Megatec/Qx devices. This driver will eventually replace the blazer_ser and blazer_usb drivers. In particular, it adds support for Voltronic Power devices.
* Increased USB_TIMEOUT to standards-compliant 5.000 seconds in most drivers. This should reduce the number of timeouts on low-speed USB 1.1 devices.
* Added many devices to the HCL. Of particular note are many Tripp Lite USB HID PDC models which were tested against NUT by Tripp Lite.
* Reworked some visual elements of the HCL.
* Also increased timeouts and added redundant commands to improve reliability of mge-utalk driver.
* Added the apcupsd-ups driver to interoperate with apcupsd installations.
* Added documentation on creating subdrivers for snmp-ups and nutdrv_qx.
* Added new drivers for the Riello UPS product line (riello_ser/riello_usb).
* Many improvements to the BCM/XCP.
* Added a few variables to the Powercom HID mappings.
* Updated the apcsmart driver, and renamed the previous driver to apcsmart-old.
* Fixed the battery percentage calculation in the bestfcom driver.
* libnutclient has been added as a C++ alternative to libupsclient.
* Fix shutdown of Eaton HID, using usbhid-ups and mge-shut
* usbhid-ups: final fix for APC Back UPS ES.
* nut-scanner: fix crash
* IPMI support can handle more different versions of FreeIPMI
* Support power supplies scan over the network nut-scanner can now scan for power supplies with IPMI over LAN. This is currently limited to IPMI 1.5 only
* Improve systemd integration
* snmp-ups: Fixed a crash on outlet management, and added delta_ups MIB support. Also fixed mappings for upsBypassVoltage, upsBypassCurrent, and upsBypassPower in three-phase IETF MIB.- Enable FreeIPMI.
* Tue Jan 29 2013 sbrabecAATTsuse.cz- Turn systemd integration on (nut-systemd-dirs.patch).- Fix README.SUSE.- nut-preconfig.patch: Fix UID recommendation.
* Mon Nov 19 2012 sbrabecAATTsuse.cz- Verify GPG signature.
* Sat Nov 17 2012 ajAATTsuse.de- Fix useradd invocation: -o is useless without -u and newer versions of pwdutils/shadowutils fail on this now.- Fix provides/obsoletes
* Tue Sep 04 2012 sbrabecAATTsuse.cz- Update to version 2.6.5:
* Fix regression in upssched.
* Support for new devices: Eaton ePDU Switched, Online Zinto A, REDi Blazer 400VA / 600VA / 800VA, UNITEK Alpha650ipF and Alpha650ipE, AEG Power Solutions PROTECT HOME, more APC SNMP cards, ATEK Defensor range, all Borri models, all COVER ENERGY SA, CyberPower OR700LCDRM1U, PR6000LCDRTXL5U and CP1000PFCLCD, Dell UPS Network Management Card, Dynamix 1000VA USB, Eaton Management Card Contact (ref 66104), EVER POWERLINE RT / 11 / 31 and DUO II Pro, GE Digital Energy GT Series 1000-3000 VA, Gtec models, all recent HP serial / USB UPS (G2, G3 and R/T models) and HP UPS Management Module, Ippon INNOVA RT, KOLFF BLACK NOVA, Lexis X-power Tigra 1kVA, Microline C-Lion Innova, Online Yunto YQ450, PowerShield Defender 1200VA, PowerWalker Online VFI LCD, Line-Interactive VI LCD and Line-Interactive VI, Riello Netman Plus 102 SNMP Card, Tripp-Lite OMNISMART500.
* mge-shut driver has been replaced by a new implementation.
* Support for integration with VMware ESXI 5.0.
* IPMI support.
* snmp-ups: high precision values for APC, more variables.
* The NUT variables and commands namespace has been fixed and completed.
* Support of ranges of values for writable variables added.
* Static source code analysis fixes by RedHat using Coverity.
* Add new \"LIST CLIENTS\" and \"NETVER\" commands to NUT network protocol.
* bcmxcp has improved support for battery status, and better supports PW9120 units.
* bestfortress has improved Best Fortress LI675VA support.
* blazer_ser and blazer_usb now try to automatically estimate high and low voltages; support for online Innova UPS (T, RT and 3/1 T); Best UPS support has been improved.
* bestups fixes, but will soon be deprecated.
* newmge-shut has been heavilly improved.
* oneac 0.80 improves support for all families of Oneac.
* usbhid-ups: for Eaton devices, ups.start.auto is now automatically adjusted for shutdown.{return,stayoff}; Liebert firmwares with incorrect exponents have also been addressed.
* snmp-ups now provides support for UPS shutdown. Composite commands are also supported now; Eaton/MGE MIB has been cleaned and completed; 3-phases support has been added to Socomec Netvision MIB; HP/Compaq MIB has been completed.
* nut-scanner now also has libupsclient has a weak runtime dependency.
* Provide an Uncomplicated Firewall (UFW) profile.
* Riello protocols have been officially published in NUT protocols library.
* Duplicate instances of upsd / upsmon are now detected.
* upslog now comes with logrotate configuration.
* more devices embed NUT for power protection, now including Thecus NAS range.
* PyNUT.py has been updated to version 1.2.2.
* Bugfixes, cleanup and improvements.
* Thu May 31 2012 sbrabecAATTsuse.cz- Fix random network data crash (bnc#764699, CVE-2012-2944).
* Wed May 30 2012 sbrabecAATTsuse.cz- Upgrade to version 2.6.3:
* nut-scanner is now improved and more portable.
* pkg-config support
* Support for new devices: Cyber Power Systems with SNMP RMCARD (100, 201, 202 and 301); Dynamix 650VA USB; LDLC UPS-1200D; Tecnoware UPS ERA LCD 0.65; Powercom BNT-xxxAP (USB ID 0d9f:0004); Various USB devices using UPSilon 2000 software.
* bcmxcp_usb now handles disconnection and reconnection.
* blazer_usb enables again inclusion of buggy IDs.
* upsd doesn\'t anymore fail where either IPv4 or IPv6 is disabled, and no explicit LISTEN directive has been specified.
* Avahi support is now automatically enabled, upon detection.
* jNut (NUT Java interface) adds device discovery support.
* Many bugfixes, cleanup and improvements.
* Sun Nov 20 2011 cooloAATTsuse.com- add libtool as buildrequire to avoid implicit dependency
* Wed Nov 02 2011 sbrabecAATTsuse.cz- Patch real source files to get missing devices (bnc#719292#c7).
* Tue Nov 01 2011 sbrabecAATTsuse.cz- Added missing USB devices (bnc#719292).- Build without IPMI (openSUSE 12.1 does not contain freeipmi).- Build without powerman for older products.- Trigger udev to apply newly installed rules (bnc#727396).
* Wed Sep 21 2011 sbrabecAATTsuse.cz- Build without IPMI for older products.
* Mon Sep 19 2011 jwAATTsuse.com- Upgrade to version 2.6.2 (requested by christoph.walterAATTcountr.de)
* NUT can now monitor power supply units (PSU) in servers
* NUT now provides \'nut-scanner\', to discover supported devices
* NUT now provides a Java interface called \'jNut\'.
* support for: Eaton 3S ; Cyber Power Systems CP1000AVRLCD ; various APC models equiped with APC AP9618 management card, including APC Smart-UPS RT XL ; Orvaldi 750 / 900SP ; POWEREX VI 1000 LED ; PowerWalker VI 850 LCD ; SVEN Power Pro+ series (USB ID ffff:0000).
* Avahi support has been added
* many updates and fixes.
* Thu Jun 16 2011 sbrabecAATTsuse.cz- Upgrade to version 2.6.1 (bnc#698152):
* NUT now propose a variable to expose UPS efficiency.
* Various recent USB regressions have been definitely fixed.
* NUT now propose a variable to expose UPS efficiency.
* Support for new devices: Eaton Ellipse ECO, Powerware 9140, Eaton 5 PX, and ambient sensor on Eaton ePDU managed, GE EP series, Inform Sinus SS 210, IPAR Mini Energy ME 800, Mustek Yukai PowerMust 1000 USB, Numeric 3000 SW, SVEN Power Pro+ series (recent models), Vivaldi EA200 LED.
* Improved Liebert ESP II support, PowerCom BNT 1500A and BNT-other, blazer
* apcsmart has more improved UPS poweroff support and options.
* usbhid-ups has completed a bit supported variables for APC and Eaton/MGE.
* Documentation updates.- Drop nut-hal and merge nut-classic back to nut (bnc#697028).
* Tue Jun 14 2011 sbrabecAATTsuse.cz- Fixed command order during hibernate to prevent UPS communication locks and failures (bnc#660236).
* Wed Feb 09 2011 sbrabecAATTsuse.cz- Do not force move hal addons - fix configure check instead - different SUSE versions need different path.
* Tue Feb 08 2011 cooloAATTnovell.com- do not hardcode location of lsusb
* Sat Jan 29 2011 poletti.marcoAATTgmail.com- Upgrade to 2.6.0.
* WARNING: Users of the megatec and megatec_usb drivers must respectively switch to blazer_ser and blazer_usb.
* WARNING: Users of the liebertgxt2 driver are advised that the driver name has changed to liebert-esp2.
* Greatly improve documentation.
* Add Augeas support.
* Added support for new devices.
* Many other fixes and improvements.
* Fri Aug 07 2009 sbrabecAATTsuse.cz- Updated to version 2.4.1:
* Support for new devices: MicroDowell Enterprise B8, B10, N8, N11, N15, N20, N22, N30, N40, N50, N60 and HiBox ST.
* NUT-Monitor now better handles the ups.status field.
* Support for Power Distribution Units (PDUs), including: Eaton ePDUs (Managed and Monitored), some Aphel models, some Raritan PDUs, and the whole list of Powerman supported devices, Chloride Desk Power 650, Cyber Power Systems Value 400E/600E/800E (USB models), Delta GES602N, Digitus DN-170020, the whole Eaton ranges (mostly composed of MGE Office Protection Systems and Powerware units) including BladeUPS, Forza Power Technologies SL-1001, HP PowerTrust 2997A, HP R/T 2200 G2, Infosec XP 1000 and XP 500, Ippon Back Power Pro (serial and USB), Kebo 1200D/D Series, Liebert PowerSure Personal XT, MGE Office Protection Systems Protection Station, Neus 400va and 600va, Phasak 400VA and 600VA, Plexus 500VA, Powercom Black Knight PRO / King PRO and Imperial, PowerKinetics BlackOut Buster, Sweex 1000 USB, UNITEK Alpha 500, WinPower CPM-800.
* NUT now embeds Python client support through the PyNUTClient module and the NUT-Monitor application.
* The dummy-ups driver now support a \"repeater\" mode.
* tcp-wrappers support has been added to the upsd server.
* The nut.conf file has been introduced.
* NUT now ships a bash completion function for \'upsc\' command.
* Many internal changes to improve maintenability:
* the USB information automatic extraction to generate the various USB helper files,
* the upsdrv_info_t structure to track more driver information, and remove the need for the upsdrv_banner() function,
* common USB code refactoring, as it is done for the serial functions.
* Tons of bugfixes, cleanup and improvements.
* Tue Jul 14 2009 cooloAATTnovell.com- fix hal directories
* Mon Feb 02 2009 sbrabecAATTsuse.cz- Removed obsolete dbus configuration for powersave (bnc#468391).
* Wed Jan 28 2009 crrodriguezAATTsuse.de- remove static libraries and \"la\" files- add missing openssl-devel to Requires of -devel package
* Tue Jan 27 2009 roAATTsuse.de- pass --with-udev-dir to configure to fix build (hal does not own /etc/udev anymore)
* Wed Dec 17 2008 sbrabecAATTsuse.cz- Fixed Suspend to Disc documentation (bnc#449861).- Support Suspend to Disc in scriptlets.- Turn UPS down during emergency Suspend to Disc (bnc#449862).- Fixed locations of pm-utils stuff (bnc#449866).- upssched-cmd moved to /bin (bnc#449828).- Fixed incorrect path to upssched-cmd (bnc#449869).- Fixed files listed twice.
* Tue Dec 09 2008 roAATTsuse.de- add pre script for classic package to add the user also before this package is installed
* Fri Sep 26 2008 sbrabecAATTsuse.cz- Fixed PreReq, useradd must be installed for %pre (bnc#429557).- Sync permissions in scriptlets and file list.
* Wed May 28 2008 sbrabecAATTsuse.cz- nut-cgi: Fixed and documented URLs (bnc#354388#c10).- README.SUSE: Fixed name of the most common USB HID driver.
* Mon May 26 2008 sbrabecAATTsuse.cz- Provide and Require nut-package (bnc#337059#c3).
* Fri May 09 2008 sbrabecAATTsuse.cz- Added suspend hook (bnc#230267).- Updated to final version 2.2.2 (bnc#385133):
* added two models supported by megatec
* includes build fixes from patches
* Wed Apr 30 2008 sbrabecAATTsuse.cz- Added hardware modaliases for solver.- Fixed generating of NUT firewall rule (bnc#385111).- Installed HAL FDI to disable hald-addon-hid-ups (bnc#385253).- Split nut-classic and hut-hal variants to separate subpackages (bnc#337059).- Split networking drivers and web server into separate packages to reduce dependencies (bnc#156614).- Split shared library according to shared library policy.- Updated README.SuSE.- Updated to version 2.2.2-pre3 (bnc#385133):
* support for new devices: APC BACK-UPS XS LCD, Atlantis Land, Mustek Powermust Office 650, Oneac XAU models, Powerware PW5115 and PW9120 (USB), Nitram Elite 2005.
* Advanced Integrated Power Management (NUT HAL integration).
* Shutdown handling has been reworked.
* Support for MGE UPS SYSTEMS 3 phases units has been added.
* snmp-ups now supports MGE
* Environment Sensor (ref 66 846).
* The ambient.temperature reporting has also been fixed for units other than APC.
* the netxml-ups driver has appeared to support MGE
* network HTTP/XML cards.
* The shared library installed by default.
* powerpanel has reach a new step toward the replacement of nitram and cpsups drivers.
* many changes, cleanup and fixes to the NUT core and various drivers.
* Thu Apr 24 2008 sbrabecAATTsuse.cz- Updated to version 2.2.1:
* support for new devices: all MGE Office Protection Systems units, Advice TopGuard 2000, Belkin F6H375-USB, Dynamix UPS1700D, Effekta RM2000MH, Jageson Technology Jasuny USPS, Powercom SMK-1500A and SXL-1500A, PowerWalker Line-Interactive VI 400/800 and 600, Powerware 9110, UNITEK Alpha 2600, UPSonic CXR1000, some vintage serial APC UPSs.
* Improvements, fixes and backports to usbhid-ups.
* Updated udev rules.
* megatec and megatec_usb drivers backported.
* development files improved.
* Mon Apr 14 2008 schwabAATTsuse.de- Work around misuse of libtool.
* Thu Oct 25 2007 sbrabecAATTsuse.cz- Fixed use of uninitialized memory (#331749#c13).
* Tue Oct 23 2007 sbrabecAATTsuse.cz- Renamed web pages to prevent conflicts.
* Mon Oct 22 2007 sbrabecAATTsuse.cz- Fixed udev USB rules for current kernels (#331749).- Added SuSEfirewall2 rule and fixed documentation (#335466).
* Tue Aug 07 2007 sbrabecAATTsuse.cz- Updated to version 2.2.0:
* New build infrastructure, with shared library.
* Support for HAL and Plug and Play.
* New drivers.
* Support for many new devices.
* IPv6 support.
* Client commands now defaults to localhost.
* Driver improvements.
* Documentation improvements.
* Wed May 16 2007 olhAATTsuse.de- Buildrequires libusb -> libusb-devel
* Tue Feb 20 2007 mvanerAATTsuse.cz- Comparison with string literal (bug #232417) - setcmd-literal.patch
* Mon Sep 18 2006 anosekAATTsuse.cz- fixed compiler warning: array subscript out of range [#204417] (overflow.patch)
* Fri Sep 01 2006 anosekAATTsuse.cz- updated to 2.0.4
* A bug has been fixed in NUT core to support resuming from suspend-to-disk. This should also fix other similar issues, like time synchronisation through the NTP.
* The mge-shut driver now better detects the Low Battery status, support new models and fixes some wrong status and data. It also fixes some issue where the UPS wasn\'t restarting (refer to mge-shut manpage).
* The genericups custom configuration through ups.conf is working again
* The genericups driver type 22 also support CyberPower 725SL (and maybe others SL models)
* The new megatec driver, which will replace a bunch of drivers by nut 2.2 (refer to docs/megatec.txt and UPGRADING) has been backported from the trunk (Development tree). The powermust driver has also received some attention.
* The new rhino driver was added to support Microsol Rhino UPS hardware. The solis has also been improved for solaris compatibility, and internal / external shutdown programming. Solis can now save external shutdown programming to ups, and support new cables for solis 3- dropped obsolete patch (nut-2.0.4-memset.patch)- fixed subscript out of range [#185610] (overflow.patch)