Changelog for tlp-rdw-1.7.0-52.2.noarch.rpm :

* Thu Oct 03 2024 Michael Pujos - Update to 1.7.0 27.09.2024
* Features Battery Care: - Apple Silicon Macbooks (M
*) with MacOS 13.0 (or later) firmware and Asahi Linux kernel 6.6 (or later): start and stop threshold - MSI laptops supported by the msi_ec driver in kernel 6.3 (or later): start and stop threshold (Issue #707) - Lenovo laptops (non-ThinkPad series): tlp-stat -b: number 60% removed because the threshold varies by model (Issue #717) - LG Gram laptops: forward to lg-legacy for kernel <= 5.17 only - ThinkPads: - The obsolete tpacpi-bat driver along with the acpi_call dependency were removed. Current Linux distributions ship with kernel 5.17 or later, which enables battery care via the built-in thinkpad_acpi. - tlp-stat -b improvements for coreboot: - Fix charge readings (Issue #657) - Indicate when recalibration is not possible - tlp-stat -b: Highlight battery care status - tlp setcharge, tlp-stat -b: display a recommendation to use the laptop on battery power until the battery is discharged to the stop threshold Disks: - tlp-stat -d: replace disk serial number with asterisks (for privacy) General: - TLP_MSG_COLORS: highlight error, warning, notice and success messages in color. - Add option --version to all TLP commands - Add tlp-stat output options: - m|--mode: print current power mode - q|--quiet: omit version header and show less information in the processor category - Add Fish shell command completion - Improve busybox compatibility by using only portable options for flock Graphics: - AMDGPU_ABM_LEVEL_ON_AC/BAT: configure display panel power savings via Adaptive Backlight Modulation (ABM) from AMD Vega or newer GPUs; kernel 6.9 required Processor: - CPU_ENERGY_PERF_POLICY_ON_AC/BAT: drop backwards compatibility for EPB with kernels < 5.2; x86_energy_perf_policy is no longer required - CPU_HWP_DYN_BOOST_ON_AC/BAT: drop the AMD implementation; the corresponding kernel patch was discarded during the 2022 review, reincarnation seems unlikely - tlp-stat -t: - Show AMD CPU temperatures - Indicate unavailable fan speed - tlp-stat -p: identify CPU model on ARM systems Radio Devices: - DEVICES_TO_ENABLE/DISABLE_ON_SHUTDOWN removed USB: - USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN removed
* Bugfixes Battery: - Thinkpads: - Fix premature abort of discharge/recalibrate for
*20 models (Issue #759) - Fix ThinkPad X13s ARM power source detection (Issue #758) - tlp-stat -b: do not recommend kernel 5.17 for coreboot, as coreboot does not support discharge/recalibrate anyway. - Fix Edge 11 battery enumeration (Issue #714) - Support ThinkPad W510 Disks: - Ensure power saving for all USB disks when plugged in - tlp diskid: filter duplicates General: - tlp-stat -s: rework manual mode detection (Issue #702) - tlp-stat --psup/udev: fix udev rule check Radio Devices: - Avoid error popups from NetworkManager when switching wifi/wwan USB: - tlp-stat -u: filter out error messages - Prevent USB devices from being unrecognized or malfunctioning on battery; adds xhci_hcd to RUNTIME_PM_DRIVER_DENYLIST defaults (Issues #436, #587)
* Wed May 22 2024 Thomas Renninger - Conflicts with tuned (bsc#1224202)- Spec cleanups
* Thu May 09 2024 munix9AATTgooglemail.com- Fix systemd_sleepdir: It must be %{_systemd_util_dir}/system-sleep and not %{_unitdir}/system-sleep (/usr/lib/systemd/system-sleep instead of /usr/lib/systemd/system/system-sleep).
* Mon Sep 25 2023 Shung-Hsi Yu - Update to 1.6.1 18.09.2023
* Bugfixes: Battery: - LG Gram laptops: ensure lg-legacy is used for kernel <= 5.17 (Issue #708) General: - tlp-stat -s: report manual mode despite restrictive umask (Issue #702)
* Fri Sep 15 2023 Shung-Hsi Yu - Update to 1.6.0 24.08.2023
* Features Battery: - LG Gram laptops: - Use standard sysfs attribute \'charge_control_end_threshold\' provided by kernel 5.18 and newer - Restore threshold after hibernate - System76 laptops with open source EC firmware: start and stop threshold - System76: default start threshold set to 90% (due to EC firmware change) - ThinkPads: model detection adapted for Libreboot (Issue #679) - Toshiba/Dynabook laptops: stop threshold 80/100% Configuration: - Allow comments (#) after parameters (Issue #598) - tlp-stat -c/--cdiff: append a notice to deprecated or removed parameters Disks: - SATA_LINKPWR_ON_AC/BAT: remove fallbacks for outdated kernels before 4.15 from defaults (still available via explicit configuration) General: - Allow coexistence with power-profiles-daemon: do not apply PLATFORM_PROFILE_ON_AC/BAT, CPU_ENERGY_PERF_POLICY_ON_AC/BAT and CPU_BOOST_ON_BAT/BAT when it is running - MEM_SLEEP_ON_AC/BAT: change system suspend mode - Add ZSH command completion - tlp-stat -s: - Silence warnings about unmasked systemd-rfkill.service/.socket when DEVICES_TO_ENABLE/DISABLE_ON_STARTUP is actually unconfigured - Show EC firmware version - Show system suspend mode - Show proper ThinkPad model string with Libreboot (Issue #679) PCI(e) devices: - RUNTIME_PM_ENABLE/DISABLE: apply even when RUNTIME_PM_ON_AC/BAT is disabled (Issue #614) Processor: - CPU_DRIVER_OPMODE_ON_AC/BAT: set CPU scaling driver operation mode (active, guided, passive); amd-pstate/intel_pstate driver required - CPU_DRIVER_OPMODE_ON_AC/BAT: check if operation mode is actually supported by the current CPU driver - CPU_ENERGY_PERF_POLICY_ON_AC/BAT: support AMD Zen 2 or newer CPUs; kernel 6.3 with amd-pstate driver in active mode required - CPU_HWP_DYN_BOOST_ON_AC/BAT:
*EXPERIMENTAL
* support AMD Zen 2 or newer CPUs; yet unreleased kernel 6.x and amd-pstate driver in active mode required - SCHED_POWERSAVE_ON_AC/BAT removed (unavailable since kernel 3.5) - tlp-stat -p: - Show amd-pstate operation mode, dynamic boost and performance attributes - Show min/max operating frequency the processor can run at (cpuinfo_min/max_freq) and limit imposed by the BIOS (bios_limit) - (-v) Show acpi_cppc performance and frequency attributes Radio Devices: - Support Thunderbolt docks to switch radio devices - DEVICES_TO_ENABLE/DISABLE_ON_SHUTDOWN:
*DEPRECATED
* feature will be removed in TLP 1.7 USB: - USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN:
*DEPRECATED
* feature will be removed in TLP 1.7
* Bugfixes Configuration: - Strip trailing blanks from unquoted parameter values Operation: - Deactivate AHCI_RUNTIME_PM and PCIE_ASPM before suspend to avoid resume freezes (Issue #593, #606, #698) Processor: - Set governor although not listed in scaling_available_governors- Revert moving 99tlp-rdw-nm from user specific directory since 1.6.0 installs it to vendor specific directory /usr/lib/NetworkManager/dispatcher.d
* Mon May 23 2022 Ferdinand Thiessen - Fix SourceURL (misplaced space) for Factory submission
* Wed May 18 2022 Stefan Schubert - Moved 99tlp-rdw-nm from user specif directory /etc/NetworkManager/dispatcher.d to vendor specific directory /usr/lib/NetworkManager/dispatcher.d. So, users changes can still be done in /etc and will not be overwritten by an update.
* Mon Apr 18 2022 popov895AATTukr.net- Due to conflicts with rfkill, we need to additionally mask the systemd-rfkill.socket- Update to 1.5.0 07.01.2022-
* Features Battery: - Sony laptops: stop threshold 50/80/100% aka \"battery care limiter\" - ThinkPads: - Use new sysfs attribute \'charge_behaviour\' for recalibration - Support T400 running coreboot via natacpi (Issue #601) - tlp-stat -b: display \"cycle_count = 0\" with the note \"or not supported\" Radio Devices: - Add support for switching NFC devices - Remove support for wireless-tools (iwconfig)-
* Bugfixes tlp-stat: - drop PM_RUNTIME=y kernel config recommendation Battery: - ASUS laptops: apply stop threshold reliably on boot and after hibernate (Issue #589) Disks: - tlp-stat -d: display correct sysfs path for disk runtime pm: /sys/block//device/power/control (Issue #606)
* Tue Dec 28 2021 larsAATTlinux-schulserver.de - 1.4.0- package bash completions for tlp-rdw in the corresponding sub-package (bsc#1180496)- add tlp-rpmlintrc to mark some rpmlint warnings as known good- Fix bsc#1181279, bsc#1179635, bsc#1177313 - Failed to preset unit: Unit file tlp-sleep.service does not exist.- As tlp somehow conflicts with rfkill and power-profiles-daemon running at the same time, lets mask these services, when tlp is installed. ...and obviously unmask them again on uninstall.- Require at least NetworkManager >= 1.20- define _udev(,rules)dir, if not already set (for Leap)- Pre-Require systemd (and BuildRequire systemd-rpm-macros) for completeness- tlp is not activated per default (bsc#1183235), as it may conflict with other Laptop mode tools. At the moment, users have to manually activate the service via \'sudo systemctl enable --now tlp.service\'
* Thu Nov 11 2021 Mikael S - Update to 1.4.0 24.09.2021-
* Features Audio: - SOUND_POWER_SAVE_ON_AC: change default to enabled (Issue #495) Battery: - \"Battery Features\" renamed to \"Battery Care\" - Introduce plugins to support Battery Care for non-ThinkPads: - ASUS laptops: stop threshold - Huawei MateBooks: start and stop threshold - LG Gram laptops: stop threshold at 80% aka \"battery care limit\" - Lenovo laptops: stop threshold at 60% aka \"battery conservation mode\" - Samsung laptops: stop threshold at 80% aka \"battery life extender\" - ThinkPads - Allow deactivation of the start threshold (START_CHARGE_THRESH_BATx=0) - Discharge malfunction: hint to check battery and charger - Use standard sysfs attributes for charge thresholds (Issue #513) - Flag ThinkPad L512 as \"unsupported\" - Validate charge threshold configuration, don\'t fail silently - tlp-stat -b - Battery Care: show plugin, supported features, driver usage and related kernel module(s) - Map battery state \"Unknown\" to \"Idle\" for clarity Configuration: - tlp-stat --cdiff: show configuration differing from defaults - PARAMETER+=\"add values\": append values to a parameter already defined as intrinsic default or in a
*previously
* read file (Issue #457) - TLP_WARN_LEVEL: warn about invalid settings, configurable for background tasks and command line - Rename parameters (backwards compatible to legacy config files): SATA_LINKPWR_BLACKLIST -> SATA_LINKPWR_DENYLIST RUNTIME_PM_BLACKLIST -> RUNTIME_PM_DENYLIST RUNTIME_PM_DRIVER_BLACKLIST -> RUNTIME_PM_DRIVER_DENYLIST USB_BLACKLIST -> USB_DENYLIST USB_BLACKLIST_BTUSB -> USB_EXCLUDE_BTUSB USB_BLACKLIST_PHONE -> USB_EXCLUDE_PHONE USB_BLACKLIST_PRINTER -> USB_EXCLUDE_PRINTER USB_BLACKLIST_WWAN -> USB_EXCLUDE_WWAN USB_WHITELIST -> USB_ALLOWLIST Disks: - AHCI_RUNTIME_PM_ON_AC/BAT: - Works only on disks defined in DISK_DEVICES - Works on NVMe (new), SATA/ATA and plugged in USB (new) disks - Works on SATA ports - No longer experimental i.e. now enabled by default; the previously existing risk of system freezes (and data loss) with the multiqueue scheduler is now eliminated: - Kernel >= 4.19 itself locks unsafe disk runtime pm - TLP generally locks it for kernel < 4.19 - DISK_APM_CLASS_DENYLIST: exclude disk classes from APM, i.e. you may now activate it for USB and IEEE1394 drives (Issue #523) - DISK_APM_LEVEL_ON_AC/BAT, DISK_SPINDOWN_TIMEOUT_ON_AC, DISK_IOSCHED: now also work when plugging in USB disks; provided disk is contained in DISK_DEVICES and \'usb\' is removed from DISK_APM_CLASS_DENYLIST - tlp-stat -d - Explain why AHCI_RUNTIME_PM is locked for a disk - Show disks attached to SATA links/ports - Show a disk\'s host (for SATA_LINKPWR_DENYLIST) - Show ALPM state in the sysfs directory of the AHCI host - Show IDs for all disks configured in DISK_DEVICES - Distinguish SATA from ATA(IDE) disks - Show NVMe disk temperature General: - power-profiles-daemon: issue error messages about conflicting service - tlp-stat -s: determine OS release without the lsb_release utility Graphics: - Add support for amdgpu (Issue #498) - Improve powerdown of unused GPUs with drivers amdgpu, nouveau, nvidia and without driver (Issues #488, #495, #498) - tlp-stat -g: - List all GPUs with at least the driver info - Show hybrid graphics switch state (switcheroo) - Intel GPU: - Show hardware min/max frequency instead of list of available frequencies (kernel change) - Show more informative RC6, FBC and PSR status where available (Issue #203) Operation Mode AC/BAT: - Speed up system shutdown/suspend by not applying AC settings anymore - TLP_PS_IGNORE: add USB; allow to ignore multiple power supply classes - tlp-stat -s: speed up power source detection - tlp-stat --psup/udev: check if udev rules for power source changes and connecting USB devices are active PCI(e) devices: - RUNTIME_PM_ENABLE/DISABLE: permanently enable/disable runtime PM for PCI(e) devices based on address (independent of the power source) - RUNTIME_PM_DENYLIST: remove amdgpu, nvidia, pcieport from defaults - tlp-stat -e -v: show device runtime_status Platform: - PLATFORM_PROFILE_ON_AC/BAT: select platform profile to control system operating characteristics around power/performance levels, thermal and fan speed - tlp-stat -p: show state of ThinkPad lapmode Processor: - CPU_HWP_DYN_BOOST_ON_AC/BAT: Intel CPU HWP dynamic boost (Issue #468) - Remove backwards compatibility of CPU_ENERGY_PERF_POLICY_ON_AC/BAT with ENERGY_PERF_POLICY_ON_AC/BAT to prevent performance issues caused by the value \'power\' in legacy configurations - PHC_CONTROLS removed (obsolete) - tlp-stat -p: - cpu1..cpuN omitted for clarity, use -v to show all - Sort more than 10 CPU cores in proper numerical order - Show intel_pstate operation mode (\"status\") - Omit \"EPB: unsupported\" for AMD or non-intel_pstate CPUs USB: - USB_EXCLUDE_AUDIO: exclude audio devices from autosuspend (Issue #556) - tlp-stat -u -v: show device runtime_status
* Mon Nov 08 2021 Fabian Vogt - Don\'t recommend bbswitch, there\'s no relation to tlp (boo#1190631)
* Wed Oct 06 2021 Fabian Vogt - tlp-sleep.service does not exist anymore- Make %files section a bit more precise
* Thu Jun 17 2021 Stanislav Brabec - Recommend bbswitch for ThinkPad battery charge control instead of acpi-call or tp-smapi not present in the distribution.
* Mon Jan 04 2021 Dominique Leuenberger - Use the same value for TLP_ULIB in the %build phase and the %install phase (boo#1180495): + BuildRequire pkgconfig(udev) + Use pkg-config --variable udev_dir udev for the value of TLP_ULIB.