|
|
|
|
Changelog for libhamlib++4-devel-4.6~git20241013-1.2.x86_64.rpm :
* Mon Oct 14 2024 Walter Fey - update to version 4.6~git * latest commit c015c3690 * IC7300 Mode filter can now be set by # (i.e. 1,2,3) * Fixed AF6SA WRC rotor controller * Added Rhode&Schwarz XK852 * Added Xiegu X6200 * Added Commradio CTX-10 * Added Guoehe PMR-171 * Added csntechnoligies.net S.A.T Satellite rotor control * Added PSTRotator control * Added Flex SmartSDR slices A-H * Added Motorola Micom M2/M3 * Added SDR Radio SDRConsole -- TS-2000 is now hardware flow control so need separate entry * Added --set-conf=filter_usb, filter_usbd, and filter_cw to allow Icom rigs set mode to set filter number too * Added macros for applications to obtain pointers to Hamlib structures (issues #1445, #1420, #487). Internal conversion is still a WIP, but use of these macros will make the final cutover transparent to applications. * Added Guohe Q900 entry * Unify behavior of all rigctl split commands * Make the set_split_ * commands modify the state of the specified split VFO - - the current or targeted VFO do not have any effect * Make the set_split_ * commands enable split automatically if not enabled * Make the get_split_ * commands return frequency of 0 Hz, mode NONE and filter of 0 Hz if split is not enabled * Allow all split commands to avoid VFO swapping if supported by the rig model * Improve Icom backend to set/get frequency, mode and filter without VFO swapping if supported by the rig model * Improve Yaesu newcat backend split handling * Expose \"Targetable features\" (RIG_TARGETABLE_ *) in dump_caps output to allow clients to determine which commands can be executed without VFO swapping * Added RIG_FUNC_SYNC for FTDX101D/MP * Added Barrett 4100 * Added DL2MAN (tr)uSDX -- needs refinement * Added Thetis entry -- derived from FlexRadio/Apache PowerSDR * Added VOICE/CW memory capability to many rigs - - thanks to David Balharrie M0DGB/G8FKH * Add -# --skip_init option to rigctl to skip rig initialization -- useful for executing commands quickly * rig_caps is no longer constant -- this may break some 3rd party relying on the \"const\" declaration. * IC7610 now has IPP, DPP, and TX_INHIBIT functions set/get * Hamlib now starts a multicast server that sends out rig information. Does not receive commands yet. See README.multicast * rigctld has new -b/bind-all option to try all interfaces -- restores original behavior. This was done to fix duplicate rigctld instances on Windows * Yaesu rigs can now use send_morse to send keyer message 1-5 or a CW message up to 50 chars (which will use memory 1) * rig set level METER can now take SWR,COMP,ALC,IC/ID,DB,PO,VDD,TEMP arguments to set which meter to display * reg get level displays meter number=name now * Added parm BANDSELECT for Yaesu rigs \'p BANDSELECT\' returns current band of VFOA \'P BANDSELECT BAND160M\' example selects the 160M band \'P BANDSELECT ?\' shows bands available for the rig * Added rig_cm108_get/set_bit to API and get/set_gpio to rigctl(d) for GPIO1,2,3,4 access on CM108 * Added Quisk as a rig * Added BG2FX FX4/C/CR/L * Fixed IC7610 to use new 0x25 0x26 command added in latest firmware * Fix W command in rigctld to work propery -- can take terminating char or # of bytes to expect * Add rig_set_debug_filename so Python can redirect debug stream * Fix Yaesu LBL_NR to use proper values * Add IC-905 * Add Anytone D578UVIII -- should work on any D558 model and perhaps others too * Add saebrtrack rotor https://sites.google.com/site/marklhammond/saebrtrack * Add offset_vfoa and offset_vfob applying to rig_set_freq * Fix K4 to put it in K40 mode when requesting ID * 2023-11-XX -- Planned for Nov 2023 * Fixes for M2 Rotors * Add rigctlsync utility to synchronize frequency from a rig to SDR# (or others) * Add SDR# rig for use with SDR#\'s gpredict plugin -- can only get/set freq * Add Apex Shared Loop rotator -- unidirectional only so far * Add client_version to rigctld so client can report it\'s version for future use/compatility/alternatives * Add --set-conf=tuner_control_pathname=hamlib_tuner_control (default) If file exists then it will be called with 0/1 (Off/On) argument with \'U TUNER 0\' or \'U TUNER 1\" Default path is for current directory * Add MDS 4710/9710 rigs * Add FLIR PTU-D48, E46, D100, D300 rotors * Fix FTDX3000 rig split- Version 4.5.6 * Fix rigctld/rigctltcp information * Fix FT817 get/set_vfo * Thu Apr 06 2023 Walter Fey - update to version 4.5.5 * 2023-04-05 * Add park to rotorez.c * Fix rig power on/off from rigctl cmd line and rigctld * Enable async mode by default to prevent WSJT-X crash on IC9700 with transceive on * Fix IC7610 get_powerstat to disable it -- cannot read power status * Fix K3 K22 command error for remote operations * Fix Gemini DX1200 gemini_set_level * Fix async I/O to not call flush * Change EX startup commands for Yaesu rigs to allow errors...Win4Yaesu not recognizing EX commands * Fix jst145 set_freq and get_freq * Restore tcflush as some odd behavior was seen that tclush fixes * Fix XG3 operations * Separate the validation cmd in newcat.c to allow rig post_write_delay to be in effect * Increase post_write to 20ms for FT710 * Add attenuator level control for TS890 * Update SMeter/SWR tables for TS890 * Add fix for TMD700 * Improve FT-857 get_vfo response when error occurs * Allow FT-857 to use cached vfo on get_vfo when error occurs reading EEPROM * Fix FTDX10 FT710 set_level AF * Fix FT-450D detection * Fix VFO A/B swapping for gpredict -- hopefully better behavior for VFO swapping rigs Should avoid setting RX freq while TX and avoid TX freq while RX * Fix QRP QDX PTT to new TQ command due to firmware changes * Remove EX103 check for FTDX5000 * Fix K3/K3S VFOB setting of mode/width * Fix AGC level display in rigctld * Change FTDX10 to no serial handshake * Add TS2000 to has_ps exception * Add FT991 to 60M exception * Fix get_powerstat bad call in rigctl_parse.c * Really fix CM108 ptt_bitnum usage * Fix Elecraft power2mW precision/accuracy * Fix power on/off/on for Icom rigs with rigctld power_on=0 * Tue Jan 10 2023 Walter Fey - update to version 4.5.4 * 2023-01-10 * Fix CM108 ptt setting for non-default usage * Fix power on/off for Icom rigs with rigctld power_on=0 * Fix get_powerstat status return for non-PS kenwood rigs * Fix FT-710, FTDX10, FTDX101D/MP usage on 60M * Fix timing on NRD-535D * Fix AGC levels with rigctld * Fix FTDX3000 EX039 error * Fix Elecraft power2mW operation * Fix rig_power2mW so it checks all ranges * Allow rigctld to start with autopower_on=0 to avoid startup timeouts when rig is powered off * Fix dummy device to work with grig by disallowing empty u call * Fix ID5100 and promote to stable and hopefully ID4100 too * Remove get_powerstat from Icom ID-5100,ID-4100,ID-31,ID-51 and fix get/set freq in all * Sat Dec 31 2022 Walter Fey - update to version 4.5.3 * 2022-12-31 * Fix serial.c for hardware flow control on Linux and MacOSy * Add QRPLabs QCX/QDX rig -- not quite a TS480 * Fix QRP QRDX firmware bugs in IF message so PTT works now * FTDX5000 will now remember startup front/read settings and restore it * Fix FTDX5000 write_delay with microham * Fix grep error on MingW build * Fri Dec 23 2022 Walter Fey - update to version Version 4.5.2 * 2022-12-23 * Fix PowerSDR ability to do commands while powered off * Fix TX-500 operations * Fix FTDX5000 to return to MIC input on closing * Fix rig.c calling rig_get_mode when backend does not have get_mode * Fix kenwood_ts890_get_level * Add Prosistel D elevation CBOX az to fix problem with azimuth control * Fix FT736R gpredict usage by adding cached get_freq * Fix get_powerstat problem with Log4OM/Flex and others * Fix -R option to not need argument * Fix -R option to close rig on last rigctld client disconnect * Add FTDX1200 to rigs that need to ensure PTT is off before changing frequency * Add --disable-parallel configure option for mingw builds on Linux * Fri Dec 09 2022 Walter Fey - update to version 4.5.1 * 2022-12-08 * FT2000, FTDX3000/D, FT891, FT991, FT950, FTDX5000 now set CAT TOT to 100ms * Add missing NB2 setting to FT-950, FTDX-1200, FT-2000, FTDX-3000, FTDX-5000, FTDX-9000 * Add missing meter reading to TS-890S -- thanks to Geore Baltz N3GB * Fix FT736 VFOB freq and mode set * Added send_raw to rigctl -- see rigctl man page * Fix AGC Level dumpcaps on most rigs * Fix rig_send_raw to return bytes read, fill buffer, and also work with fixed length response/null terminator * Change all Kenwood rigs to 500ms serial timeout * Fix dumpcaps filter printout to only show declared filters * Fix triggering PTT on XGComms device on Linux * Fix level_gran in all rigs * Add RIG_FUNC_TUNER to flrig.c * Fix FT-991 level_gran (needs to be done for lots of rigs) * Fix man page rigctl to show units for LEVEL items * Fix Flex6xxx if_len * Fix FLRig set_ptt * Fix missing KEYSPD to TS890 * rigctl \'W\' command can now use a singled char terminator like ; that allows for variable length responses with no timeout -- e.g. W FA; ; * New RIG_LEVEL_USB_AF to control audio gain from rig to computer -- to allow AGC function in software using RF and USB_AF * Add RIG_LEVEL_AGC_TIME to allow AGC/OFF to be set for IC-7300, IC-9700, IC-705 * Add RIG_FUNC_OVF_STATUS to get overflow status for IC-7300, IC-9700, IC-705, and IC-R8600 * Sun Oct 30 2022 Walter Fey - update to version 4.5 * 2022-10-30 * New rotator utility https://www.pianetaradio.it/blog/catrotator/ * Add FT-710 * Add Rohde&Schwartz EK89X receiver * Add Xeigu X5105 * Add Gemini DX-1200 HF-1K Amplifiers * Kenwood rigs should now support AI command packets * Add FT-990UNI for older 990 ROMs 1.2 and earlier * Add FT-650 * Add get_separator and set_separator and -S option for rigctld -- node-red applicability * Add GRBLTRK rotor project -- two axis rotor * enum meter_level_e is deprecated and will be removed in 4.6 * Add SDRPlay SDRUno rig -- can now use Data/Pkt in WSJTX * Add ability to use cat_string to FLRig via the \"w\" and \"W\" commands * Add -B/--mapa2b to rigctlcom * Add password capability to rigctld via -A switch. * Asynchronous rig data output handling to support transceive and spectrum data. Mikael, OH3BHX * See new set_conf option async for some Icom rigs * Multicast UDP packet output for asynchronous data. Mikael, OH3BHX * Rig state poll routine to serve commonly used data like frequency and mode from cache. Mikael, OH3BHX * deprecated hamlib_port_t at front of rig_state structure -- new one at end of structure * New RIG_LEVEL_BAND_SELECT for Yaesu rigs * New rig_get_conf2 to replace rig_get_conf buffer overflow potential * New rot_get_conf2 to reaplce rot_get_conf buffer overflow potential * Added Barrett 4050 -- not functional yet * Added TCI 1.X -- not functional yet * Added TM-V71(A) * Added IC-F8101 * Added JRC JST-145 and JST-245 * Added Xiegu X108G, G90, and X6100 * Added CODAN Envoy and NGS * Added Lab599 TX-500 * Added GOMSPACE GS100 * Deprecated: rigctl commands \\set_trn (A) and \\get_trn (a) as they never worked as intended * Deprecated: field rig_caps.transceive and RIG_TRN_ * macros * Fri Dec 03 2021 Walter Fey - update to version 4.4 * 2021-12-02 * Icom rigs now default filter 2 when setting PKTUSB but user can override * Fix FTDX9000 meter readings * Add Android sensor as a rotator * Added rig_get_vfo to some Icom rigs that have XCHG or 0x25 command capability * Added ability to build hamlib with docker * Added M0NKA mcHF URP rig * Faster serial i/o noticeable on higher baud rates * IC7300/9700/7800/785x set_clock/get_clock routines added -- no auto set yet * Yaesu FT1200/891/991/DX10/DX101/DX101MP set_clock/get_clock routines added * Wed Sep 15 2021 Walter Fey - update to version 4.3.1 * 2021-09-14 * Bug fix release - Do not do vfo_fixup on satmode rigs - Fix compilation of misc.c with gmtime_r replacement function for mingw - Fix python build. For some reason casting tp vfo_t in the RIG_VFO_N macro broke the swig parsing - Append the missing information to build hamlib v4.3 for Android NDK - Change set_icom_set_mode_with_data to not change mode unless necessary - Since Icom rigs default to filter 2 if a filter is not selected we will do the same when turning on data mode - Fix segfault in kenwood_set_vfo - scripts: Update example in readme, since 4.0 817 is 1020 - Make testlibusb.c compatible with libusb < 1.0.23 Note: On systems with libusb < 1.0.23 a warning will be emitted but compliation should proceed without error. - Update testlibusb.c warning to \"may be\" instead of \"will be - Change kenwood to only set VFOA default on 1st rig_open call * Wed Sep 01 2021 Walter Fey - update to version 4.3 * 2021-09-01 * libusb-1.0.23 or greater is now required or use --without-libusb * Generating documentation now requires GNU source-highlighter. * Added IC-575 * Less VFO swapping of newer Icom rigs -- zero swapping in WSJTX and JTDX * Dual rotator control in rotctl -R option * Started work on simulators -- very crude right now but usable to debug some things * Overhaul of rig split -- reverse split (VFOA=RX VFOB=TX) should work for rigs capable of it Starting VFO does not matter -- rig will end up on RX VFO S VFOA 1 VFOB S VFOB 1 VFOA S Main 1 Sub S Sub 1 Main * Mon May 17 2021 Walter Fey - update to version 4.2 2021-05-17 * New rig_get_mode_bandwidths * New rig_get_info * New rig_get_vfo_info * FILPATHLEN has changed to HAMLIB_FILPATHLEN * USRP lib and gnuradio are deprecated and will be removed in 5.0 * Added Radan rotator * Added Malachite SDR * Frequency and PTT are now validated -- may solve some random problems where freq and ptt get stuck or not changed * Major rework for PRM80 * Add twiddle_timeout and twiddle_rit * rigctld --twiddle is deprecated and will be removed in 5.0 along with get_twiddle and set_twiddle * Rework Doxygen manual including default layout for Doxygen 1.9.1. * Mon Feb 01 2021 Walter Fey - Version 4.1 2021-01-31 * rigctld and rigs should be more robust for disconnect problems * Several fixes for Icom and Yaesu rigs * Nobody should need to use rig->caps or rig->state anymore If you need a variable added please contact us. Note that rig->state abstraction is not implemented yet...no need known * New rig_get_caps_int and rig_get_caps_cptr functions to replace using caps-> values * New rig_get_function to replace using caps-> function pointers * Fix shared library problem with WSJTX, JTDX, and JS8Call * New model Barrett 950 * Sun Jan 31 2021 Walter Fey - update to version 4.1~git * Wed Jan 27 2021 Walter Fey - changelog stripped
|
|
|