Changelog for wsjtx-2.6.97-1.4.x86_64.rpm :

* Sat Sep 28 2024 Walter Fey - update to version 2.7.0-rc7- Enhancements to the SuperFox decoder:
* Performance of the SuperFox decoder has been further improved.
* You can now set individual FTol values and tune the decoder to the exact sync frequency of the SuperFox signal if it is not exactly 750 Hz. Both result in a better decodability in certain situations.
* Important: The Rx frequency must be set close to the sync frequency +/- FTol, for example 750 +/- 50 Hz. - Introduction of a new Fox verification system:
* The new Fox verification system uses one time passwords (OTPs), and works for the SuperFox mode as well as for old-style Fox and Hound operation. It can be enabled by the new OTP checkbox on the Advanced tab of the Settings dialog.
* Fox or SuperFox stations send individual OTPs via radio. Hounds automatically check the validity of the received OTPs in real time from a server when there is an internet connection. Otherwise, the validity can also be queried manually later. OTP verifications can only be retrieved once the transmission has already taken place.
* You may optionally display the received OTP values by checking the box \"Show OTP messages\".
* If the Fox or SuperFox callsign is verified by receipt of the correct OTP, the background color of the Hound or Super Hound label switches to green.
* Theoretically, DXpeditions can set up their own OTP server, however, we recommend using the server at https://www.9dx.cc.
* Use of the new Fox verification system requires an OTP key. The system uses open source code and standard encryption technology. For testing purposes, non-verified SuperFox transmissions are now possible without a key. - Improvements to SuperFox/Hound operation:
* SuperHounds must now first decode the SuperFox before they can call, and a QSO must be started by double-clicking on a SuperFox decode. (Note that calling the Fox blindly not only leads to unnecessary band utilization, but can also significantly reduce the QSO rate due to unanswered (Super)Fox replies.)
* Switching to SuperHound mode automatically sets the Rx frequency to 750 Hz. The previously selected frequency is saved and restored afterwards.
* Right-clicking on the H button now activates/deactivates SuperFox mode.
* A flaw resulting in sub-optimal SuperFox QSO rates has been corrected.
* SuperFox decoder now does a more thorough job of rejecting QRM from non-SuperFox signals.
* Fields in the SuperFox payload not otherwise used in a particular transmission are now set to known nonzero values. Do NOT use RC6 or earlier versions to decode SuperFox transmissions from RC7 or later.
* Old-style Fox stations can now transmit free text messages (up to 13 characters) by using an available stream.
* Some enhancements useful for Fox operators: Active Station Window now shows band activity. Hound callsigns can be highlighted via UDP API, and assigned a score for sorting via UDP API. Fox Tx frequency is preserved when switching in/out of Fox mode.
* UDP Status Update messages now include information on how many callsigns have highlighting applied, and how many callsigns have a score assigned. - Other enhancements and fixes:
* In FT8 mode, the Settings dialog no longer resets the VFO frequency to band/mode default unless really needed.
* Several code improvements specifically for macOS.
* Updated CTY.DAT and Hamlib.
* Sat Jul 20 2024 Walter Fey - update to version 2.7.0-rc6
* Strong signals from Superfox too frequently failed to decode.
* SuperFox sometimes sent incorrect signal reports and an invalid digital signature.
* A Fortran bounds error could sometimes occur in the SuperFox decoder.
* For SuperFox operator, the \"age\" displayed for Hound callers became garbled after the 0000 UTC date change.
* Decodes of SuperFox transmissions were not posted to PSK Reporter.
* Some SuperFox-related messages were posted incorrectly to ALL.TXT.
* Logic for turning the SuperHound label green was flawed in some circumstances.
* Wed Jul 03 2024 Walter Fey - update to version 2.7.0-rc5
* Corrected a flaw that caused \"Log automatically\" to not work for the ARRL Digi Contest.
* Control elements for special operating activities are now disabled (grayed out) if the respective function is not applicable.
* Corrected a longstanding flaw that caused \"Start new period decodes at top\" to stop working properly after some time.
* Right-click mouse press events are now less error-prone.
* Improved the readability of the first line when \"Start new period decodes at top\" is checked.
* 4-digit grids are now logged for certain contest modes to ensure that the log complies with contest rules.
* The Fox Tx frequency is now saved and restored separately.- SuperFox mode
* The SuperFox mode behaves operationally like the present Fox and Hounds mode
* IMPORTANT: Older revisions of WSJT-X and derivative programs will not be able to decode SuperFox transmissions. Hounds must use WSJT-X 2.7.0-rc5 (or a later release, when available) to receive SuperFox messages.
* Check https://wsjt.sourceforge.io/wsjtx-doc/Release_Notes_2.7.0-rc5.txt
* Wed Mar 13 2024 Walter Fey - update to version 2.7.0-rc4- QMAP enhancements -- of particular interest to EME operators:
* QMAP now decodes Q65 submodes with both 60-second and 30-second T/R sequence lengths. Clicking on a resulting line in the WSJT-X Active Stations window automatically sets dial frequency and working submode as needed to call that station.
* QMAP operates in 60-second receive sequences, and its Q65 decoder starts at t=19.5, 30.0, 49.5, and 58.5 s into the sequence. Most decoded messages are displayed well before the end of the relevant time slot.
* A new, more compact file format is now used for wideband data files. A \"Save decoded\" option has been added to the Save menu.
* An option has been added to allow exporting a 3 kHz portion of a wideband data file as a standard WSJT-X
*.wav file.
* CTRL+click on QMAP\'s upper waterfall sends an integer kHz dial frequency request to WSJT-X.
* With focus on the WSJT-X main window, hit Alt+A on the keyboard to clear the Active Stations window.
* Many minor enhancements to the User Interface.- WSJT-X:
* Enable decoding of MSK144 from the jt9[.exe] executable.
* Several changes to reduce problems experienced when (contrary to our recommendations) messages with short (10-bit) callsign hashes are used in standard FT4/FT8 sub-bands.
* Tue Jan 02 2024 Walter Fey - update to version 2.7.0-rc3
* Added a new \"Update Hamlib\" function. On Windows, it allows the user to update Hamlib directly from the program. The previously used version is backed up, so the user can easily revert a hamlib update.
* The Hamlib version in use is now displayed (also on Linux and macOS).
* The FT Roundup Messages protocol has been enhanced. It now allows also the exchange of static 4-digit numbers instead of serial numbers. This extends the usability of the FT RU protocol for other contest types.
* Improved direct switching between modes. Submode, as well as the status of the \"Sh\" and \"Fast\" checkboxes are now saved and restored by mode.
* Some right-click events were made more intuitive and consistent. . Right-clicking the Q65 button enables Q65 Pileup mode, a left-click brings you back to the normal Q65 mode. . Right-click the JT65 button to switch to JT9 mode.
* For Q65, all messages for us are now displayed in the right window.
* Message averaging is now allowed only when VHF features are enabled, and label texts are changed to \"Single Period Decodes\" and \"Average Decodes\" only if averaging is enabled.
* Some improvements to the Hamlib Transceiver code. Behavior is now more stable when Rig Split has been selected.
* Prevented redundant network communication between WSJT-X and DX Lab Suite Commander.
* Download of the LotW file now works without OpenSSL libraries.
* Made the spot counter work for WSPR.
* Prevented insertion of an individual contest name when in Fox mode.
* WAE entities are now assigned to the correct DXCC when \"Include extra WAE entities\" is not selected.
* Added a utility program \'cablog\' which can be used to convert the wsjtx.log file to Cabrillo format for the ARRL EME contest.
* Minor improvements to the Active Stations window.
* The Rx/Tx frequency for Echo mode has been fixed at 1500 Hz.
* Some corrections and updates to the INSTALL instructions for Linux.
* Updated CTY.DAT file.
* Fri Jul 07 2023 Walter Fey - update to version 2.7.0-rc2
* CTRL+SHIFT+F11/F12 now changes dial frequency by 1000 Hz instead of 2000 Hz.
* Improved spotting to PSK Reporter for upcoming HamSCI Festivals of Eclipse Ionospheric Science.
* Added optional Hungarian translation of the user interface.
* Fixed a flaw that could produce false decodes in Q65 submodes D and E.
* Fixed a flaw with the QSO start time. It is now reset when the DX Call changes.
* Fixed a flaw that prevented contest logging of the ARRL Digi Contest.
* Right-clicking the Q65 mode button to toggle the Q65 Pileup mode on/off now also works on macOS.
* Fixed a compilation error on macOS Ventura.
* WSPR and FST4W band hopping now works again.
* It is now ensured that \"U.S.A.\" is displayed when using certain cty.dat files.
* Corrected the problem with duplicated FT8 entries in ActiveStations window.
* Tue May 23 2023 Walter Fey - update to version 2.7.0-rc1
* QMAP and Q65 Pileup mode are of particular interest to those engaged in Earth-Moon-Earth (EME) communication, but other applications may be found for them as well.
* QMAP is derived from MAP65, an older program used since 2007 for EME, mainly on the 2 m band. QMAP provides single-polarization receive-only capabilities for any one of the 60-second submodes of Q65. It allows you to monitor all traffic in a 90 kHz subband while conducting EME QSOs in the usual way with WSJT-X.
* Q65 Pileup mode is a new feature in WSJT-X that will assist DX operators using Q65 in pileup circumstances with many simultaneous callers and very weak signals, such as those experienced by 6-meter EME DXpeditions.
* Further details on QMAP and Q65 Pileup mode are available in a Quick-Start guide posted here: https://wsjt.sourceforge.io/Quick_Start_WSJT-X_2.7_QMAP.pdf
* WSJT-X now provides more efficient spotting to PSK Reporter. Redundant spots are omitted, and posting of spots is now spread more widely in time. (Temporarily, in support of the HamSCI Festivals of Eclipse Ionospheric Science, spots will be transmitted more frequently during the upcoming solar eclipses.)
* WSJT-X is now able to process more than 100 FT8 decodes in a single reception interval.
* Improvements to the Fox mode:
* More convenient and efficient handling of the two queues.
* Fox Log window now displays statistical data on the QSO rate.
* When the station locator is changed (e.g during portable operations), the new locator will be sent automatically to PSK Reporter.
* The cty.dat file can now be updated by clicking a button on the Settings -> Colors tab.
* A new status display appears when fetching a new LotW file.
* Multi-streamed messages transmitted by MSHV are now handled properly when WSJT-X is in Hound mode.
* Auto-sequencing now has better protection against unwanted effects caused by late FT8 decodes.
* Fixed an inconsistency in which Contest Name was not correctly remembered.
* Other minor bug fixes.
* Updated hyperlinks to our homepage and to our new WSJT GROUP User Forum (https://groups.io/g/wsjtgroup/) can now also be found in the User Guide.
* The build instructions for macOS have been clarified.
* Mon Jan 16 2023 Walter Fey - update to version 2.6.1
* Fix a flaw in Q65 mode that prevented proper display of the T/R period spinner.
* Make the initialization of the decoded text font more robust.
* Better initialization when starting the program in FT8 Hound mode.
* Fix a bug causing program crash with more than 100 decodes in a single FT8 sequence.
* Fix a compiler warning on macOS.
* Correct the reference to \"ARRL International Digital Contest\" in the Release Notes.
* Sat Jan 07 2023 Walter Fey - update to version 2.6.0
* Mode selection buttons on main window for FT4, FT8, JT65, MSK144, Q65, and FT8\'s Hound mode
* Support for the ARRL International DX Contest
* Performance enhancements for the FT8 and Q65 modes
* New features for EME Echo mode, including calibrated SNR reports
* Several new convenience features for Fox operators
* Save/Restore capability, \"Preferred\" status, and effective date ranges for mode-dependent tables of default frequencies
* Improved display features for contest log
* Improved calibration of SNR estimates for modes FST4 and FST4W
* Mon Jan 03 2022 Walter Fey - update to version 2.5.4
* Repair a defect that caused occasional crashes when in QSO with stations using nonstandard callsigns.
* Tue Dec 14 2021 Walter Fey - update to version 2.5.3
* Add a note in memory of G4WJS to the About window
* Add a simple $DXCALL macro capability for Tx messages, and update the User Guide accordingly
* Ensure that MAIN VFO is used for receiving on rigs that require it
* Repair a defect in reporting low-confidence decodes to PskReporter
* Updated CTY.DAT database, tnx to Jim AD1C
* Fri Nov 05 2021 Walter Fey - update to version 2.5.2
* Repair a longstanding regression that caused si tail-ended Tx2 messages to be omitted from logged information
* Parse \"dx-call-1 RR73; dx-call-2 +nn\" messages (i3=0, n3=1 DXpedition mode) in regular 77-bit modes
* Repair a regression associated with setting the main window width on program startup.
* Repair a problem with Q65 decodes of type \'q3\' for messages of the form \" Call_2\"
* Execute code associated with Q65 decodes of type \'q5\' only when the Max Drift control is set to 50. This fix prevents double-incrementing of the message averaging counter on the first decoding sequence.
* Polarization offset \'Dpol\' from the astronomical data window is now written to file azel.dat if environment variable WSJT_AZEL_EXTRA_LINES has been defined as 1 or greater. Dpol is especially useful for EME on the higher microwave bands.
* The Auto Log QSO option in \"Settings->Reporting\" now behaves the same as the Prompt to log QSO option when not in a special operating context mode.
* The Fast/Normal/Deep setting in Q65 mode is now a sticky setting and is no longer reset to Fast on program startup or when Settings has been opened. The user selection is used for automatic decodes, but Deep is used for any subsequent manual decode attempts.
* New hamlib code to correct minor flaws in controlling several rigs.
* Update the Chinese and Hong Kong translations of the user interface.
* Fri Oct 22 2021 Walter Fey - update to version 2.5.1 - Improved Q65 support for 10GHz Aircraft Scatter contributed by Rex, VK7MO, and Roger, W3SZ. (See \"10 GHz Terrestrial with Q65\" in DUBUS Vol 1/2021 page 64.) Decodes of type \'q3\' may now include corrections for frequency drift. - Repair a defect that failed to pre-load the DE and DX calls to the hash lookup tables in the Q65 decoder. - Repair standard message Tx4 and Tx5 generation in Q65 mode when using a non-standard call. - Repair a defect in generation of the standard Tx2 JT65 message in EME mode when using a compound call. - Repair a defect when decoding 77-bit type 4 non-standard call message. - Repair a defect that could cause a crash when switching from Q65 to JT65 mode and attempting a double-click decode. - Enable \'q3\' AP decoding in Q65 mode for messages containing a non-standard call. - Repair a defect that required a blank DX Grid to achieve Q65 \'q3\' decodes of messages containing a non-standard call. - Repair the logic that sets parameters for Q65 \"Deep\" decoding. - In Q65 mode, allow \'q2\' decodes when MyCall is compound or non-standard. - Repair a long-standing defect that could cause a crash when reference spectrum correction is enabled. - Updated UI translations from Xavi, EA3W, Oba-san, JA7UDE, and a new translation for Traditional Chinese by Steven, BU2EL. - Updated CTY.DAT database, tnx to Jim AD1C - Improved main window layout to ensure TxN messages are fully visible.
* Mon Sep 27 2021 Walter Fey - update to version 2.5.0 - Repair a defect that caused CAT errors when using WSPR band hopping and auto tune-up with some Icom rigs. - Ensure that CALL3.TXT is not deleted while updating the file (this allows sharing using symlinks to work).
* Tue Sep 07 2021 Walter Fey - update to version 2.5.0-rc6 - Repair a file handle leak in wsprd (tnx Phil, KA9Q). - Better handling of the Tx1 buttons when changing special operating modes. - Q65 mode now supports contest special operating modes. - Repair an issue when non-ASCII characters used in account names. - Repair a regression that prevented WSPR band-hopping working when the Tx percentage is zero.
* Sat Aug 07 2021 Walter Fey - update to version 2.5.0-rc5
* Repair a regression that caused some messages involving compound or nonstandard callsigns to be encoded as free text
* Wed Aug 04 2021 Walter Fey - update to version 2.5.0-rc4 - Repair a defect in CALL3.TXT lookups that incorrectly matched partial calls - Instructions in macOS ReadMe.txt to suppress App Nap energy saving - Revised User Guide using FT8 mode for the basic tutorial - Allow contest and FD operating in Q65 mode
* Mon Jul 05 2021 Walter Fey - update to version 2.5.0-rc3 - Repair a long standing defect that caused UDP Protocol Heartbeat messages to not be sent when no other intervening messages are sent.
* Mon Jun 28 2021 Walter Fey - update to version 2.5.0-rc2 MAP65: - Compute polarization angle for Xpol systems and display to nearest degree - Compute and display the recommended Tx polarization - Protect against Fortran bounds errors in several places - Insert leading 0 when needed in UTC hours and minutes on waterfall - Wideband Q65 synchronization corrected to include single-polarization mode - Corrected a one-symbol (0.6 s) delay in Q65 Tx audio - Basic instruction document for building an MS Windows portaudio DLL for MAP65 users who are unable to use WDM/KS drivers for their multi-channel sound cards. WSJT-X (including the decoder for Q65 used by MAP65): - Increase maximum DT to 5.5 s when EME decoding is enabled in Q65 - Fix generation of Tx5 message when \"hiscall\" has suffix /P or /R. - Improve width management of GUI\'s band-selection combo box - Restore plotting of Q65 sync curve after a q3 decode - Disable selection of \"View | Message Averaging F7\" for modes other than JT4 and JT65 - Switching to Q65 mode now defaults to \"Decode | Fast\" - Repair a long standing regression with message generation for 72-bit modes when using a compound callsign. - Repair a defect in diagnostic logging that could cause crashes on some platforms. - Repair a defect which failed to strip leading and trailing spaces on input of callsigns during validation. - Hamlib updates including repair of defects with PTT handling on a separate serial port via rigctld, delayed PTT with Elecraft K3 series rigs, and support for the Icom IC-575 rig. - Updated CTY.DAT database
* Fri Jun 04 2021 Walter Fey - update to version 2.5.0-rc1
* Q65 decoder has been enhanced to measure and compensate for linear frequency drift in Q65 signals.
* FST4W mode no longer saves .WAV files when \"Menu->Save->None\" is checked.
* Thu May 27 2021 Walter Fey - Corrections to WSJT-X User Guide, thanks to LA6VQ.
* Tue May 25 2021 Walter Fey - update to version 2.4.0 - Repair a defect with own call decode highlighting when callsigns with a common root are decoded. - Q65 message averaging correctly disabled as be menu option. - Repair a regression with missing timestamps in AlL.TXT for the MSK144 mode. - Repair a defect in the selection of working frequencies matching the current band and mode combination. - WSPR band hopping mode now generates a tune up tone for bands where it is scheduled to transmit. - Repair a long standing defect per band tune and Tx power level memories. - More flexibility for inputting calls into the DX Call field, leading and trailing white space characters are allowed but ignored.
* Sat Mar 27 2021 Walter Fey - update to version 2.4.0-rc4 - Correct a problem with display of Q65 sync curves for submodes Q65-120x and Q65-300x. - Audio frequency and decoded message are now saved for up to 100 most recent Q65 decodes. Subsequent double-click on waterfall will search the list for the clicked frequency +/- 10 Hz, recover \"DXCall\" from the mosr recent decode there, and attempt a decode at that frequency with full \"q3\" sensitivity. - Use new ADIF recommendations for Q65: mode=MFSK, submode=Q65. - If \"Single decode\" is unchecked, look for Q65 decodes from accumulated average even after obtaining a single-sequence decode at selected Rx Freq. - For data read from .wav files, display the original UTC (derived from file name) on the waterfall instead of current UTC. - Protect against bounds errors caused by unusual settings on the Wide Graph. - Correct a problem with Split operation in FT4 mode. Thanks to JG1APX.- version 2.3.1 - When sending traffic to a multicast UDP server ensure that the local loop-back interface is used if no others are selected. - Repair a defect in instance lock file handling that causes an infinite loop on start up. - Invert the PTT serial port sharing default behaviour, and enable sharing when non-Hamlib CAT control is combined with direct serial port PTT control. - Allow the FST4 and FST4W decoders to continue after the first successful decode when using negative NB values to try multiple NB values. - Repair defects in auto-sequencing, particularly with responding to a repeated final message. In general a double-click of the repeated message now does the right thing. - Repair a regression that had inadvertently disabled EU VHF Contest mode when using the MSK144 mode. - Repair a defect that could caused incorrect log entry fields when using FT4 mode and a priori (AP) decoding. - Repair defects saving .WAV files for periods with decodes. - Offer a new scheme for adjusting macOS shared memory parameters.
* Mon Mar 15 2021 Walter Fey - update to version 2.4.0-rc3 - Repaired a memory corruption related to display of Q65_Sync, particularly nasty on macOS. - Q65 now dissplays two sync curves: orange for the current sequence, red for the accumulated average. - Behavior of \"Save decoded\" has been corrected. - Repaied a defect that caused crash when displaying the Wide Graph with lower frequency limit set to 0. - Program no longer terminates a transmission when Settings is closed. - Program no longer forces TxFreq to 700 or 1000 Hz when entering Q65 mode or closing Settings. Instead, it highlights TxFreq with red background when its value should be 700 Hz but is not. - Program displays a warning label if a contest mode is active in Q65 mode. - Many updates to User Guide, mostly related to Q65. - Repaired a regression that disallowed a new QSO initiation after an abandoned QSO.
* Fri Mar 05 2021 Walter Fey - update to version 2.4.0-rc2 - Repair a defect that caused WSJT-X to crash when launched from an icon on macOS. - Repair a crash when using the JT4 mode. - Sequencing improvements to hold transmitted signal report fixed during a QSO. - UI translation updates tnx to Sze-to, VR2UPU, and Michael, 5P1KZX. - Enable the \"Call 1st\" option for Q65. - Improved Q65 message averaging that linearly averages the first 4 sequences and averages exponentially thereafter using a time-constant of 4 sequences. - Improved macOS post-install instructions, tnx to John, G4KLA. - Enhanced Q65 simulator that generates file names compatible with message averaging, tnx Charlie, G3WDG. - Q65 simulator option to generate single tone waveforms, tnx to Charlie, G3WDG. - Better suppression of birdies in the Q65 decoder. - Blank Q65 decode messages removed. - Automatic low Tx audio offset for the widest Q65 modes to keep Tx signal in transmitter passband, tnx to Charlie, G3WDG. - Improved SNR estimates for Q65 mode. - Decode depths Fast/Normal/Deep are now identical in Q65 mode. - \"Save decoded\" is now enabled for Q65 mode. - The obsolete ISCAT mode has been removed
* Thu Feb 04 2021 Walter Fey - update to version 2.4.0-rc1- New Mode Q65 with excellent characteristics when used for EME on VHF through to microwave bands.
* Mon Feb 01 2021 Walter Fey - update to version 2.3.0 - FST4/W: Disable envelope shaping at start and end of transmission when environment variable FST4_NOSHAPING=1. Works for fst4sim too. - Add time stamp to error message boxes to aid diagnosis. - Repair a defect that caused crashes at start up for some macOS Big Sur users. - Repair a defect that could cause the jt9 slow mode decoder process to exit incorrectly with a failure status. - Updated CTY.DAT file.
* Mon Jan 25 2021 Walter Fey - update to version 2.3.0-rc4 - The wsprd command line tool uses the current working directory for the data file directory if it is not specified. - Updates to the language translations of the WSJT-X user Interface. - Updated CTY.DAT file.
* Wed Jan 06 2021 Walter Fey - update to version 2.3.0-rc3 - FST4W: Improve FST4W decoder sensitivity on fading channels and decrease false decode rate. - FT8: Fixed a crash triggered by double clicking on the waterfall to invoke a decode of a signal in the preceding T/R interval. - FST4W: Do not save .c2 files. - FST4W: Correct a bug that could cause incorrect operation when using negative noise blanker (NB) percentage to trigger looping over a range of NB percentages. - fst4sim: Added simulation of Lorentzian fading spectrum, invoked by negative fspread values. - Color highlighting scheme window fixed in dark mode. - Reports sent by QSO partners to other stations no longer logged in error. - UDP Status(1) message now includes the current Tx message. - Example diagnostic logging configuration files included. - Use system localization for date fields in Log QSO dialog. - Improvements to audio input and output buffer sizes. - wsprd: Fails gracefully if data directory does not exist. - wsjtx_app_version: new utility to print application version string. - Regression causing incorrect working frequency selection when changing modes repaired. - Regression with QSO initiation with \"Best S&P\" repaired. - Updated installation instructions for macOS covering M1 hardware. - Improved compatibility is Debian 9 required distribution packages. - Repair regression with missing time-stamps in the ALL.TXT journal. - Allow hamlib_settings.json to work with PTT only configurations so that optional PTT sharing on RTS or DTR can be enabled. - Several improvements to main window sizing and layout. - Repair regression with OpenSSL libraries being required when LoTW highlighting is not enabled. - Repair a defect that caused 2 by 1 callsigns to be incorrectly parsed as non-standard. - Several updates to international UI translations.