Changelog for libopenmpt-devel-0.7.10-lp155.117.1.x86_64.rpm :

* Fri Sep 27 2024 Antonio Teixeira - Update to 0.7.10:
* [Change] FST was added to the list of supported file extension. AMP uses this extension for multichannel MODs.
* [Bug] The Android NDK build system did not enable C++20 when available.
* Fixed inconsistency in length calculation and actual playback length with tempo commands below 32 BPM in various formats (MDL, MED among others).
* MED: Command 09 (set speed) was limited to 20 ticks per row instead of 32 ticks per row.
* MED: Allow tempo parameters < 32 BPM.
* MED: Disallow free panning if hardware mixing is enabled.
* For MOD-style vibrato, a speed parameter of 0 was not treated as effect memory. Vibrato speed is now correct for both vibrato commands.
* MED: Fix pattern index exhaustion in modules with multiple subsongs.
* OKT: Don\'t drop global commands when setting paired channel volume, and try to write channel volume on the next row in this situation.
* PTM: Use square root pan law, like in XM files.
* SFX: Ignore unused data at end of oneshot samples which sometimes caused clicky noises.
* SFX: More accurate implementation of arpeggio effect.
* Mon Jul 22 2024 Mia Herkt - Update to 0.7.9:
* [Sec] Potential division by 0 when seeking in the module with seek.sync_samples enabled (r21167).
* [Change] The work-around for https://gcc.gnu.org/bugzilla/show_bug.cgi?id=115049 has been changed from forcing -O1 on GCC 14 to setting - fno-ipa-ra on all GCC versions on non-ELF platforms.
* MOD: Allow sample swapping to work when swapping from a non-looping, stopped sample back to a looping sample (fixes MOD.energy).
* DBM: Import second sustain point in case the first sustain point is not set, or if it has a lower index than the first.
* DBM: When several instruments referenced the same sample with different properties (volume, loop points, etc.), only one set of properties was imported (fixes DBM.Supernova).
* DBM: Prioritize effects more correctly when the same effect is encountered in both effect columns of a cell (fixes DBM.143_Gnoj).
* DBM: Don’t import offset effects when there’s a tone portmento next to them.
* DBM: A few IT-specific playback quirks are disabled for more accurate playback (e.g. in “Are You Flying With Me?” by Jazzcat).
* DIGI: Sample play direction was reset if adjacent channel contained a Note Cut note.
* AMF: When running out of sample slots, file reading became be misaligned because the sample name was not skipped.
* MED: Command 0F was not imported.
* MED: Upper frequency limits should be more accurate now.
* MED: Channel panning is now only applied in MMD2 files if the free pan flag is set.
* MED: Volume command resolution was incorrect for pre-MMD3 files.
* XM: oggmod does not support stereo samples but keeps the stereo flag when encoding such samples. Such samples are now imported as mono samples instead of not importing them at all.
* XM: For files saved with registered MadTracker 2 versions, do not put binary garbage (the user ID) in the tracker metadata field. It is replaced with “registered” instead.
* For some truncated files, the used tracker was not identified correctly.
* S3M: Identify files saved with early Impulse Tracker versions, Sound Club 2, Liquid Tracker, NESMusa, UNMO3, deMODifier, Kosmic To-S3M, and better tell old ModPlug Tracker versions apart.
* S3M: When skipping sample loading, some tracker identifications were not working as intended.
* IT: Identify files saved with itwriter.
* DTM: Identify files saved with Digital Tracker 2.3.
* xmp-openmpt: If there is only one subsong, set the song title to the “global” song title instead of the name of that subsong.
* xmp-openmpt: Sample and instrument names were not sanitized, sometimes showing on multiple rows.
* Sun Jun 09 2024 Mia Herkt - Update to 0.7.8:
* [Sec] Potential heap out-of-bounds read with malformed Dynamic Studio DSm files.
* MED: Additional command pages can now be read.
* MED: Echo DSP is now emulated.
* AMS: Default channel panning was broken, using all-center panning instead of MOD-style panning.
* STP: Correctly import volume slides where both nibbles are set.
* MDL: Pitch slide depth was wrong since libopenmpt 0.6.0.
* DTM: Fix pitch slide depth for samples with finetune.
* DSm: Don’t import as Amiga module (and thus allow Amig a resampler to be enabled), as this PC format can easily exceed the Amiga frequency range.
* DSm: Only the first 48 samples were ever read.
* STM / STX: Don’t set channel panning. ScreamTracker 2 only outputs mono sound.
* PSM: File header probing was stricter than actual file loader, rejecting manipulated files that would otherwise load fine.
* Sat May 25 2024 Mia Herkt - Update to 0.7.7:
* IT: Disable a few more compatibility flags for older SchismTracker builds.
* IT: Halve the output volume of files saved with ChibiTracker, as its mixer is about half as loud as ours.
* S3M: In mono mode, the ratio between sample and OPL volume was incorrect.
* S3M: Detect files saved with PlayerPRO.
* XM: Detect files saved with PlayerPRO. Improved detection of files saved with ModPlug Tracker.
* XM: Files with impossibly small pattern headers are now rejected, like FastTracker 2 does.
* STK: Loosen SoundTracker file rejection heuristics a bit to allow loading of files with malformed song titles and overly long samples. Other heuristics has been tightened a bit.
* MOD: Change VBlank timing heuristic to always assume CIA timing when long samples unsupported by original ProTracker) are found.
* MOD: Disable NoiseTracker quirks if empty sample slots have a default volume other than 0.
* MOD: 7-bit panning detection may have returned incorrect results for MODs with a channel count other than 4.
* MED: Improve handling of default tempo, panning and channel volume in files containing more than one song.
* MO3: Reduced maximum allowed music data (not samples) size from 2 GiB to 512 MiB.
* XMF: Header validation is now stricter.
* MDL: Slightly more accurate import of pattern command 9 (enabling envelopes instead of setting envelope position).
* ULT: Support the highest three octaves.
* OPL emulation could produce clicks when using a mix rate higher than 65536 Hz.
* Fri Mar 29 2024 Mia Herkt - Update to 0.7.6:
* [Sec] Potential heap out-of-bounds read or write past sample end with malformed sustain loops in SymMOD files.
* MED: Transposed samples were playing too low in some files (e.g. mix94.mmd1).
* OKT: Some files with garbage at the end were rejected (e.g. katharsis - piano lesson.okta).
* Compressor DMO: It was possible that the plugin would not behave as intended at mix rates above 500 kHz.
* Avoid re-allocating the loop state map contents on every playthrough of the module.- Run test suite during package build
* Sun Mar 17 2024 Mia Herkt - Update to 0.7.5:
* [Sec] Null-pointer write (32bit platforms) or excessive memory allocation (64bit platforms) when reading close to 4GiB of data from unseekable files..
* [Sec] Write buffer overflow when reading unseekable files close to 4GiB in size.
* [Sec] Possible out-of-memory (32bit platforms) or excessive memory allocation (64bit platforms) when reading malformed data from unseekable files.
* [Sec] DMF: Possible null-pointer write or excessive memory allocation when reading DMF files.
* IT: In the previous version, Zxx macros in IT files made with older MPT versions were no longer working.
* There was a periodic click when playing a module using the Chorus or Flanger DMO plugin at a mix rate exceeding ~136.5 kHz.
* An older bugfix for undefined behaviour in the Distortion DMO plugin was incorrect, causing the distorted sound to be different in some situations.
* xmp-openmpt: Metadata retrievel for playlist items was broken.- Changes in 0.7.4:
* [Bug] Makefile: libopenmpt 0.7.3 broke running the test suite for Emscripten builds.
* openmpt123: openmpt123 now uses a narrower layout on terminal windows with a width of less than 72 characters.
* Setting all possible load_skip flags resulted in nothing being loaded at all, instead of just not loading the selected module parts.
* When playing all subsongs, set_position_seconds didn’t always calculate the correct subsong to jump to.
* IT: A few more compatibility flags are now disabled for modules saved with earlier Schism Tracker versions.
* IT: MIDI macros were reset in IT 2.14 / 2.15 files that declared to be compatible with older IT versions (fixes spx-visionsofthepast.it).
* OKT: Work around missing negative arpeggio implementation by transposing the notes up an octave.
* OKT: Channel volume commands were sometimes lost over less important effects.
* IMF: Ignore magic bytes in sample header. “Leaving All Behind” by Karsten Koch uses unexpected magic bytes, Orpheus ignores them just like the instrument header magic bytes.
* Tue Nov 07 2023 Mia Herkt - Update to 0.7.3:
* Fix: set_pitch_factor no longer affected OPL instruments since version 0.6.0.
* Thu Jun 29 2023 Danilo Spinella - Update to 0.7.2:
* [New] MOD: Can now read modified 8-channel MOD files from the DOS game Aleshar - The World Of Ice.
* [Sec] Possible out-of-bounds read or write when reading malformed MED files. (r19389)
* [Bug] The Opal OPL3 emulator symbols were not namespaced properly.
* Mon May 08 2023 Mia Herkt - Update to 0.7.1
* IT: Improved fingerprinting of early ModPlug Tracker versions.
* XMF: Modules from Astroidea demos can now be read as well.- Changes in 0.7.0:
* [New] 667 files from Composer 667 are now supported.
* [New] GTK and GT2 files from Gramouf Tracker are now supported.
* [New] Can now read a variant of the DSMI AMF format called DMF, as found in various DOS games distributed by Webfoot (Tronic, H2O, PowBall, etc.).
* [New] DSM files from Dynamic Studio are now supported.
* [New] XMF files from the DOS game Imperium Galactica are now supported.
* [New] Can now read the hacked MOD format (DMF) from the game “Apocalypse Abyss”.
* [New] libopenmpt: New APIs for getting the current tempo as a floating point value: openmpt::module::get_current_tempo2() (C++), and openmpt_module_get_current_tempo2() (C).
* [New] C API: New stream callbacks for various platform extensions to the C stdio interface: openmpt_stream_get_file_posix_lfs64_callbacks() in libopenmpt/libopenmpt_stream_callbacks_file_posix_lfs64.h for explicit off64_t on Posix systems, openmpt_stream_get_file_posix_callbacks() in libopenmpt/libopenmpt_stream_callbacks_file_posix.h for off_t on Posix systems, openmpt_stream_get_file_msvcrt_callbacks() in libopenmpt/libopenmpt_stream_callbacks_file_msvcrt.h for 64bit file support on Windows systems with the Microsoft C runtime, and openmpt_stream_get_file_mingw_callbacks() in libopenmpt/libopenmpt_stream_callbacks_file_mingw.h for 64bit file support when targetting MinGW. The old openmpt_stream_get_file_callbacks() has been deprecated in favour of a stricly standard conforming openmpt_stream_get_file_callbacks2() in the same libopenmpt/libopenmpt_stream_callbacks_file.h header. libopenmpt/libopenmpt.h defines LIBOPENMPT_STREAM_CALLBACKS_FILE_POSIX_LFS64, LIBOPENMPT_STREAM_CALLBACKS_FILE_POSIX, LIBOPENMPT_STREAM_CALLBACKS_FILE_MSVCRT, and LIBOPENMPT_STREAM_CALLBACKS_FILE_MINGW respectively in order to allow for checking header availability.
* [New] C API: New stream callbacks for memory buffers. openmpt_stream_get_buffer_callbacks() and openmpt_stream_buffer_init() are deprecated. Use openmpt_stream_get_buffer_callbacks2() and openmpt_stream_buffer_init2() instead. The new variants do not support loading only a file prefix and checking for overflow any more. This was only useful when using the old openmpt_could_open_probability2() style interface from the libopenmpt 0.2 API, which has been superseded by openmpt_probe_file_header(), openmpt_probe_file_header_without_filesize(), and openmpt_probe_file_header_from_stream() in libopenmpt 0.3.0.
* [New] libopenmpt_ext: New interface interactive3 adding openmpt::ext::interactive3::set_current_tempo2() (C++) and openmpt_module_ext_interface_interactive3.set_current_tempo2() (C) which allow setting non-integer tempo values.
* [New] New Makefile option CONFIG=mingw-w64 which consolidates all MinGW-w64 build configurations with the following options: MINGW_FLAVOUR=[|-posix|-win32], WINDOWS_ARCH=[x86|amd64], WINDOWS_FAMILY=[|desktop-app|app|phone-app|pc-app], and WINDOWS_VERSION=[win95|win98|winme|winnt4|win2000|winxp|winxp64|winvista|win7|win8|win8.1|win10|win11].
* [New] New Makefile option CONFIG=mingw which consolidates all MinGW build configurations with the following options: MINGW_FLAVOUR=[|-posix|-win32], and WINDOWS_VERSION=[win95|win98|winme|winnt4|win2000|winxp].
* [New] Building with MSYS2 is now fully supported for Makefile and Autotools build systems.
* [New] Makefile CONFIG=djgpp now supports CPU= option to build optimized for a particular CPU. See build/make/config-djgpp.mk for all available options. FLAVOURED_DIR=1 places the CPU-specific optimized builds in separate folders below bin/.
* [New] Building with a MinGW32 CRTDLL toolchain is now supported via Makefile option CONFIG=mingw32crt.
* [New] Makefile now uses PKG_CONFIG as path to pkg-config.
* [New] The C++ API is now also enabled for Emscripten builds by default.
* [New] Support for GCC 7 has been restored.
* [New] Support for Clang 6 has been restored.
* [New] Support for Android NDK 18 has been restored.
* [New] openmpt123: --banner [0|1|2] allows changing the openmpt123 banner style to hidden, shown, or verbose, respectively.
* [New] openmpt123: --assume-terminal allows skipping the openmpt123 terminal check, and thus allows running the UI with non-terminal stdin, which can be useful for some very basic remote control functionality.
* [Change] xmp-openmpt: The Amiga resampler emulation is now enabled by default.
* [Change] in_openmpt: The Amiga resampler emulation is now enabled by default.
* [Change] The official Windows builds (x86, amd64, arm, arm64) now require Windows 10 21H2 (or later). The official legacy Windows builds (x86-legacy, amd64-legacy) are unchanged and still require Windows 7 (or later).
* [Change] \"date\" metadata will now exlude the UTC time zone signifier Z if the precise time zone is unknown.
* [Change] ctl seek.sync_samples now defaults to 1.
* [Change] Makefile CONFIG=generic is gone. Please use CONFIG=standard instead.
* [Change] Makefile CONFIG=macosx and CONFIG=haiku have been removed. The OS is auto-detected.
* [Change] Makefile options CONFIG=mingw64-win32, CONFIG=mingw64-win64, CONFIG=mingw64-winrt-x86, CONFIG=mingw64-winrt-amd64, and CONFIG=mingw-win9x have been replaced by CONFIG=mingw-w64, and CONFIG=mingw.
* [Change] Autotools now default to C++20 and only fall back to C++17 when C++20 is not supported.
* [Change] Makefile now defaults to C++20 and only falls back to C++17 when C++20 is not supported by the compiler.
* [Change] Makefile now defaults to C17 and only falls back to C11 when C17 is not supported by the compiler.
* [Change] Makefile CONFIG=djgpp option USE_ALLEGRO42 now defaults to 1 and implies building a liballegro42 locally. This requires executing build/download_externals.sh before building to download the liballegro42 sources.
* [Change] in_openmpt: The Winamp input plugin in_openmpt is now deprecated for use with the latest Winamp or WACUP releases. Please use the native implementations available in Winamp >=5.9.0 or WACUP instead. This does not mean that in_openmpt/in_mod will not receive further development, it just means that the responsibility now lies with the player implementors themselves. We will still maintain the status quo of our in_openmpt input plugin for users of earlier Winamp version, or users on older systems, or users of compatible players.
* [Change] The POSIX fd file callbacks implementation now handles EINTR and retries the read() call.
* [Regression] Full support for Visual Studio 2017 has been removed. We still support targeting Windows XP with Visual Studio 2017.
* [Regression] Support for mingw-std-threads has been removed. If you require a thread-safe libopenmpt, please build with POSIX threading model and/or complain to MinGW/GCC about not properly supporting C++11 features in 2023.
* [Regression] Support for Emscripten versions older than 3.1.1 has been removed.
* [Regression] C API: openmpt_stream_get_file_callbacks() used to provide 64bit file access on some platforms where long is 32bit. This never worked reliably for all platforms though. The behaviour is now changed to always stick to what standard C supports with fseek and ftell, where the offset type is long. openmpt_stream_get_file_callbacks() is deprecated now due to behavioral change. Please migrate to openmpt_stream_get_file_callbacks2().
* [Regression] Using the system-provided liballegro42 is no longer supported. The option BUNDLED_ALLEGRO42=1 does not exist any more.
* Reduced aliasing when downsampling with the Sinc + Low-Pass resampler.
* The sample position is now rounded instead of truncated when resampling without interpolation.
* Seeking with sample sync now supports portamento up / down commands as well as IMF/ PTM note slides. Tone portamento is now synchronized correctly when seeking in DBM, 669 and MED with fast slides (first tick of portamento was previously not executed).
* The filter cutoff frequency is no longer rounded to integer frequency values.
* MED: Tempos higher than 255 BPM can now be imported in pattern data.
* MED: MMD1 files with more than 16 channels are now supported.
* ULT: Import 8-bit volume commands with full precision.
* IT: Initial “last note memory” of every channel is C-0, so a lone instrument number without note triggers that note.
* S3M: Better approximation of old “stereo control” SAx command used in Purple Motion’s PANIC.S3M.
* S3M: In ScreamTracker 3.03 and later, OPL notes with tone portamento next to them are delayed until the next row and then the new pitch is used instantly.
* MO3: Envelope sustain was not imported correctly if the source file was an XM.
* MOD: Lone instrument number with retrigger effect swap sample immediately.
* Recalling a sample’s default volume using an instrument number (as opposed to regular volume commands) previously ramped the volume change smoothly over a whole tick. Now the user-configured ramp settings are used instead (as it would happen when using a volume command to achieve the same effect).
* Tue Apr 18 2023 Antonio Teixeira - Update to 0.6.10
* [Bug] File probing and loading results could be inconsistent for SFX files, so that probing could claim that a file is definitely not playable even if it would be.
* MOD: VBlank heuristics are now applied to MOD files with M!K! signature. Fixes mod.siedler ii.
* NoiseTracker MODs are now always played with VBlank timing.
* MED: Add support for default instrument pitch.
* MED: Global play transpose value was not considered for MMD0 files.
* 669: Reject files with lots of control characters in song message.
* mpg123: Update to v1.31.3 (2023-03-19).
* Wed Mar 29 2023 Mia Herkt - Update to 0.6.9
* [Bug] An exception could be thrown during rendering when trying to access the release node of an empty envelope.
* The fix for the OPL cutoff bug introduced in libopenmpt 0.6.7 was incomplete.
* ULT: Offset commands exceeding 65535 samples were sometimes not imported correctly even if there was room for them.
* After seeking with seek.sync_samples=1, the filter settings of playing notes were not updated since libopenmpt 0.6.7.
* Loading of and seeking inside (malformed) modules with thousands of short sub-songs has been sped up.
* Sat Feb 04 2023 Dirk Müller - update to 0.6.8:
* [Bug] DSYM: Loading DSYM files got broken in 0.6.7.
* When seeking around in a module, the tempo was sometimes incorrectly limited to 255 BPM
* Initial instrument cutoff was broken for OPL instruments in libopenmnpt 0.6.7
* mpg123: Update to v1.31.2
* Mon Jan 09 2023 Mia Herkt - Update to 0.6.7
* IT: In sample mode, portamento to a different sample turns off the filter if cutoff / resonance was previously 127 / 0.
* S3M Detect files saved with Graoumf Tracker instead of claiming they were made with OpenMPT 4.47.
* S3M: Pattern loop state was not propagated anymore since libopenmpt 0.6.0, leading to wrong song length calculation and SB0 + SBx being located on different channels not working properly anymore.
* Thu Sep 29 2022 Mia Herkt - Update to 0.6.6
* [Sec] Possible crash when playing manipulated IT / MPTM files with a T00 command.
* MTM: In MultiTracker, setting speed and tempo are mutually exclusive commands. Still, some MultiTracker modules were made to be played with external players such as DMP, so they actually rely on “standard” speed / tempo behaviour. Decide which behaviour to use by checking of speed and tempo commands are found on the same row.
* MTM: Ignore sample loops if the loop end is <= 2.
* Echo DMO: Migrate left and right delay values in modules made with OpenMPT versions between 1.27.01.00 and 1.30.05.00 to the correct interpretation.- Changes in 0.6.5:
* [Bug] Makefile now also uses CC, CXX, LD, and AR when set as environment variables.
* [New] Makefile now uses PKG_CONFIG as path to pkg-config.
* DBM: Sample middle-C frequencies were slightly off. laffik_-_marynarze.dbm sounds much more bearable now.
* DBM: Fixed pattern break parameter interpretation.
* Echo DMO: Setting the delay parameter to 0 yielded a 2-second echo delay instead of 1ms.
* Digi Booster Echo: Setting the delay parameter to 0 yielded a 510ms echo delay instead of approximately 334ms.
* Thu Jun 16 2022 ecsos - Update to 0.6.4 - [Bug] openmpt123: Linking failed when using Autotools build system targeting MinGW. - [Bug] tests: Linking failed when using Autotools build system targeting MinGW. - [Bug] examples: Linking failed when using Autotools build system targeting MinGW. - [Change] Support for mingw-std-threads when building for MinGW targets is now deprecated because this is not supported for GCC 11 or later (see https://github.com/meganz/mingw-std-threads/issues/79). - Ping-pong sample loops sometimes stopped playing at the end of the loop.- Changes from 0.6.3 - Pitch / Pan Separation and Random Variation instrument properties were not resetting properly when seeking, potentially causing instruments to be played e.g. at a vastly different pan position compared to playing the module continuously. - MED: Stereo samples were not imported correctly. - zlib: Update to v1.2.12 (2022-03-27).- Changes from 0.6.2 - [Sec] Possible out-of-bounds write in malformed IT / XM / MPTM files using the internal LFO plugin. (r17076) - [Sec] Possible out-of-bounds read when using Amiga BLEP interpolation with extremely high-pitched notes. (r17078, r17079) - ISO-8859-1-related charsets from Amiga OS and RISC OS are now handled more accurately, thus avoiding some unwanted control characters. - MO3: Pattern indices 254 / 255 were not treated as playable patterns even if the original file was a MOD / XM. - Correctly apply ST3-style effect memory when seeking in S3M files. - Command S (S3M / IT style) effect memory was not applied when seeking. - Initial channel mute status was not reported correctly in get_channel_mute_status since libopenmpt 0.6.0. - FLAC: Update to v1.3.4 (2022-02-21). - pugixml: Update to v1.12.1 (2022-02-16).- Changes from 0.6.1 - [Bug] Linking libmpg123 no longer fails on OpenBSD. - [Bug] Possible hang with malformed DMF, DSM, MED, MUS, OKT and SymMOD files containing 65536 or more patterns when destroying the module. - [Bug] Avoid NaNs and infinite values with custom tunings and in the I3DL2Reverb plugin. - MIDI macros are now evaluated when seeking. - The letter \"z\" is now evaluated in fixed MIDI macros (Z80...ZFF) the same way as in Impulse Tracker. - MOD: Loosened VBlank timing heuristics so that \"frame of mind\" by Dascon plays correctly. - MOD: Validate the contents of \"hidden\" patterns beyond the end of the order list when the file size matches the expected size when only taken \"official\" patterns into account. This fixes Shofixti Ditty.mod from Star Control 2 while keeping other (partly broken) modules working. - MED: Command 20 (reverse sample) is now only applied when it\'s next to a note. - S3M: Introducing the \"Send OPL key-off when triggering notes\" compatibility setting broke retrigger for OPL notes again (they retriggered rather than not retriggering). - S3M: Retriggering a note no longer resets its pitch after a portamento. - S3M: Partially implement retrigger behaviour for stopped notes in SoundBlaster mode: Like in IT, it is not possible to retrigger a sample that has already stopped playing. - DIGI: Improve compatibility with E3x reverse sample command. - DSym: Tempos < 32 were treated as tempo slides. - SymMOD: Key-off command was not implemented properly.- Changes from 0.6.0 - [New] MUS files from Psycho Pinball and Micro Machines 2 are now supported. - [New] SymMOD files created with Symphonie / Symphonie Pro are now supported. - [New] FMT files created with Davey W Taylor\'s FM Tracker are now supported. - [New] DSYM files created with Digital Symphony are now supported. - [New] STX files (transitional format between Scream Tracker 2 and 3) are now supported. - [New] TakeTracker MODs with TDZ1 to TDZ3 magic bytes are now supported. - [New] openmpt123: openmpt123 will now expand file wildcards passed on the command line in Windows when built with MSVC. - [New] libopenmpt_ext: New interface interactive2 adding openmpt::ext::interactive2::note_off(), openmpt::ext::interactive2::note_fade(), openmpt::ext::interactive2::set_channel_panning(), openmpt::ext::interactive2::get_channel_panning(), openmpt::ext::interactive2::set_note_finetune(), and openmpt::ext::interactive2::get_note_finetune() (C++) and openmpt_module_ext_interface_interactive2.note_off(), openmpt_module_ext_interface_interactive2.note_fade(), openmpt_module_ext_interface_interactive2.set_channel_panning(), openmpt_module_ext_interface_interactive2.get_channel_panning(), openmpt_module_ext_interface_interactive2.set_note_finetune(), and openmpt_module_ext_interface_interactive2.get_note_finetune() (C). - [New] Makefile CONFIG=emscripten now supports EMSCRIPTEN_TARGET=audioworkletprocessor which builds an ES6 module in a single file with reduced dependencies suitable to be used in an AudioWorkletProcessor. - [New] Makefile CONFIG=emscripten now supports EMSCRIPTEN_PORTS=1 which uses dependencies (zlib, mp123, ogg, and vorbis) from Emscripten Ports instead of using miniz, minimp3, and stb_vorbis locally or building zlib, mp123, ogg, and vorbis locally. - [New] Makefile CONFIG=emscripten and CONFIG=djgpp can now build zlib, mpg123, and vorbis locally instead of only supporting miniz, minimp3, and stb_vorbis via ALLOW_LGPL=1. - [Change] Makefile CONFIG=emscripten now supports EMSCRIPTEN_TARGET=all which provides WebAssembly as well as fallback to JavaScript in a single build. - [Change] openmpt123: DOS builds now use the Mercury fork of liballegro 4.2 for improved hardware compatibility. - [Change] libopenmpt no longer generates internal interpolation tables on library load time, but instead only on first module load time. - [Regression] Makefile CONFIG=emscripten does not support EMSCRIPTEN_TARGET=asmjs or EMSCRIPTEN_TARGET=asmjs128m any more because support has been removed from current Emscripten versions. - [Regression] Support for GCC 7 has been removed. - [Regression] Support for Clang 5, 6 has been removed. - [Regression] Support for Emscripten versions older than 1.39.7 has been removed. - [Regression] Building with Android NDK older than NDK r19c is not supported any more. - libopenmpt can now detect infinite pattern loops and treats them as the song end. This means that setting a repeat count other than -1 now always guarantees that playback will eventually end. The song loop counter is decremented each time it ends up at the start of the infinite loop, so the song does not restart from the beginning even if the repeat count is not 0. - openmpt::module::set_position_seconds() accuracy has been improved for modules with pattern loops. - Samples played at the wrong volume when rendering modules in mono. - IT: Portamentos in files with Linear Slides disabled are now more accurate. - IT: Pitch/Pan Separation was affected by note-off commands, and wasn\'t reset by panning commands like in Impulse Tracker. - IT: Even after libopenmpt 0.5.14 the filter reset logic was still not 100% identical to Impulse Tracker: A note triggered on tick 0 of a row with a Pattern Delay effect still caused the filter to be reset on repetitions of that row even though the note wasn\'t retriggered. - IT: Added read-only support for BeRoTracker commands 1 and 2 (equivalent to XM commands K and L). - XM: BeRoTracker saves smooth MIDI macros in a different way from OpenMPT. This command is now imported correctly. - XM: Emulate FT2 Tone Portamento quirk that inverts portamento direction after the target was reached (if target note was higher than previous note). - S3M files saved with Impulse Tracker and latest Schism Tracker now also compute sample playback speed in Hertz. - Depending on whether an S3M file was last saved in Scream Tracker with the Sound Blaster or Gravis Ultrasound drivers loaded, different compatibility flags are now applied. For files saved with the GUS, the sample volume factor is now also ignored (fixes volume levels in S3Ms made on the GUS, in particular if they use both samples and OPL instruments). - S3M: Enforce the lower frequency bound. - MOD: Loosened VBlank timing heuristics so that the original copy of Guitar Slinger from Dizzy Tunes II plays correctly. - FAR: Correct portamento depth is now used. - DMF / IMF: Improved accuracy of finetune commands. - MDL: Implemented finetune command. - OKT: Various accuracy improvements such as: Sharing volume between mixed channels, volume commands on mixed channels are permanent (not reset with new notes), mixed channels do not support default sample volume, 7-bit samples are actually supposed to be played as-is (not amplified to full 8-bit range), reject speed command parameters >= 20. - zlib: v1.2.11 (2017-01-15). - mpg123: v1.29.3 (2021-12-11). - ogg: v1.3.5 (2021-06-04). - vorbis: v1.3.7 (2020-07-04). - miniz: v2.2.0 (2021-06-27). - minimp3: commit 50d2aaf360a53653b718fead8e258d654c3a7e41 (2021-11-27). - stb_vorbis: v1.22 commit 5a0bb8b1c1b1ca3f4e2485f4114c1c8ea021b781 (2021-07-12). - FLAC: v1.3.3 (2019-08-04). - PortAudio: v19.7.0 (2021-04-06).- Add gcc11-c++ to build requires for Leap.
* Wed Apr 06 2022 ecsos - Update to 0.5.17
* [
*
*Sec
*
*] Possible out-of-bounds write in malformed IT / XM / MPTM files using the internal LFO plugin. (r17081)
* [
*
*Sec
*
*] Possible out-of-bounds read when using Amiga BLEP interpolation with extremely high-pitched notes. (r17082)
* MO3: Pattern indices 254 / 255 were not treated as playable patterns even if the original file was a MOD / XM.
* Correctly apply ST3-style effect memory when seeking in S3M files.
* Command S (S3M / IT style) effect memory was not applied when seeking.
* FLAC: Update to v1.3.4 (2022-02-21).
* pugixml: Update to v1.12.1 (2022-02-16).
* Sat Feb 05 2022 ecsos - Update to 0.5.16
* [Bug] Possible hang with malformed DMF, DSM, MED and OKT files containing 65536 or more patterns when destroying the module.
* [Bug] Avoid NaNs and infinite values with custom tunings.
* The letter “z” is now evaluated in fixed MIDI macros (Z80…ZFF) the same way as in Impulse Tracker.
* MOD: Loosened VBlank timing heuristics so that “frame of mind” by Dascon plays correctly.
* MOD: Validate the contents of “hidden” patterns beyond the end of the order list when the file size matches the expected size when only taken “official” patterns into account. This fixes Shofixti Ditty.mod from Star Control 2 while keeping other (partly broken) modules working.
* MED: Command 20 (reverse sample) is now only applied when it’s next to a note.- Update to 0.5.15
* [Sec] Possible out-of-bounds read of stack-allocated array in malformed AMS files. (r16243)
* [Bug] Fixed various undefined behaviour found with ubsan.
* IT: Even after libopenmpt 0.5.14 the filter reset logic was still not 100% identical to Impulse Tracker: A note triggered on tick 0 of a row with a Pattern Delay effect still caused the filter to be reset on repetitions of that row even though the note wasn’t retriggered.
* MOD: Loosened VBlank timing heuristics so that the original copy of Guitar Slinger from Dizzy Tunes II plays correctly.
* mpg123: Update to v1.29.3 (2021-12-11).
* Thu Dec 23 2021 Mia Herkt - Update to 0.5.14:
* [Sec] Possible out-of-bounds read in Chorus plugin with NaN plugin parameters. Most implementations of the “fast math” compiler optimizations will prevent this crash but it is not guaranteed. (r16096)
* [Bug] Fixed undefined behaviour with custom tunings found with ubsan.
* OPL: Improved channel allocation strategy when there are lots of faded-out notes.
* MOD: Digital Tracker MODs have four unknown bytes right after the magic bytes which seem to be ignored even by Digital Tracker itself. Just skip over them.
* The logic when to turn off the resonant filter was broken in some edge cases since libopenmpt 0.5.1.
* IMF: Implemented XE1-XE3 commands, which disable individual envelopes. Command Nxy (cutoff slide + resonance) is now also partially supported (only resonance for now).
* IMF: Filter envelopes were upside down.
* MTM: Omitting pattern loading through the load.skip_patterns ctl caused sample data to be corrupted.
* S3M: Ignore O00 commands in files created with Scream Tracker 3.00 and 3.01, as this command only gained effect memory in version 3.03.
* STM: Use S3M-like sample swap behaviour.
* XM: Disable arpeggio quirk for XMs made with Skale Tracker. Fixes KAPTENFL.XM.
* Wed Dec 01 2021 Danilo Spinella - Update to 0.5.13:
* [Bug] Fixed various undefined behaviour found with ubsan.
* IMF: Change envelope interpretation to be more like in XM instead of IT and tighten header validation.
* MED: Some samples had a ping-pong loop when there should be no loop at all.
* MT2: Ignore incorrect drums chunk size in early MT2 files (fixes e.g. “A little Rock” by Csumi).
* MT2: Work around initial master volume of 0 used in some files that apply a fade-in a the song start using track automation that would stay silent forever otherwise (track automation is currently not supported).
* OKT: Apply portamento on every tick.
* mpg123: Update to v1.29.2 (2021-10-23).
* Fri Oct 22 2021 Danilo Spinella - Update to 0.5.12:
* [Sec] Possible crash when loading malformed MDL files. (r15603)
* [Bug] Fixed various undefined behaviour found with ubsan.
* Seeking with sample sync sometimes didn’t compute the correct sample position with pingpong-looped samples.
* IT: Tremor command I11 erroneously behaved like I00 (use previous parameter) unless IT Old Effects were enabled.
* PTM: Panning was translated wrong in some edge cases.
* IMF / PTM: Note Slide commands were sometimes slightly off.
* OKT: Better support for fine note slides.
* DBM: Echo enable effect parameter range checks were incorrect.
* XM: Sample texts in XMs made with MadTracker are now also decoded using Windows-1252 encoding.
* in_openmpt: Song metadata is no longer reverted when viewing file info.
* mpg123: Update to v1.29.0 (2021-09-06).
* Mon Aug 23 2021 Mia Herkt - Update to 0.5.11:
* [Sec] Possible crash with malformed modules when trying to access non-existent plugin slots FX251-FX255.
* [Sec] Possible read beyond sample start after swapping to a sample with loop points set but not loop enabled.
* [Sec] Fixed various possible crashes with malformed MMCMP files.
* [Sec] MED: Possible read past end of sequence name (stack-allocated, so relatively unlikely to result in a crash).
* Fixed excessive memory usage with files claiming to have an extremely high rows per beat count while also using tempo swing. Maximum rows per beat are now limited to 65536.
* STP: Avoid creating thousands of patterns when loading malformed files even though no more pattern data can be read.
* Sun Jul 11 2021 Mia Herkt - Update to 0.5.10:
* S3M: Honor the Stereo flag not being set. This improves the sound of some tunes like Turbulence by Purple Motion.
* S3M: Detect MPT 1.0 alpha versions which didn’t set the Stereo flag. In this case, the unset Stereo flag is also ignored because MPT 1.0 alpha used the default S3M channel panning anyway.
* S3M: Only for OPL instruments the high sample rate bits should be ignored; for PCM instruments they are clamped to 65535 Hz.
* MOD: Do not apply ProTracker loop length quirk to MODs that could have been made with Scream Tracker (fixes Soul-O-Matic by Purple Motion).
* AMF (DSMI): Format revisions 1 and 9, as well as early (technically malformed) revision 10 files, are now supported. Surround panning commands and instrument number without note are now converted correctly.
* AMF (DSMI): Patterns and samples were not read correctly in some files (e.g. AVOID.AMF).
* GDM: Correctly import extra-fine portamentos.
* Wed Jun 23 2021 Mia Herkt - Update to 0.5.9:
* The retrigger effect didn’t work correctly for OPL instruments in some cases depending on the chosen output sample rate.
* S3M: Emulate IT short sample retrigger quirk in S3M files saved with Impulse Tracker and Schism Tracker.
* ProTracker 3.6 doesn’t support sample swapping. It is now disabled when loading a ProTracker 3.6 IFF module.
* Some files with “hidden” garbage patterns were not played correctly since libopenmpt 0.5.3.
* MOD: E9x retrigger now works the same way as in ProTracker 2.
* MDL: Improve auto-vibrato accuracy.
* 669: Reject files that contain any pattern tempo higher than 15.
* Reduce memory consumption of malformed XPK-compressed files.
* Tue Apr 20 2021 Mia Herkt - Update to 0.5.8:
* [Sec] Possible null-pointer dereference read caused by a sequence of openmpt::module::read, openmpt::module::set_position_order_row pointing to an invalid pattern, and another openmpt::module::read call. To trigger the crash, pattern 0 must not exist in the file and the tick speed before the position jump must be lower than the initial speed of the module.
* [Bug] libopenmpt 0.5.7 broke seeking in some subsongs.
* The built-in LFO plugin did not load the correct initial LFO frequency.
* IT command S7x (instrument control) is now supported when seeking with sample sync enabled.
* libopenmpt_ext play_note was cutting of channels even when there were plenty of free channels to use.
* Sat Mar 20 2021 Mia Herkt - Update to 0.5.7:
* [Sec] Possible null-pointer dereference read caused by a sequence of openmpt::module::read, openmpt::module::set_position_seconds with a position past the song end, and another openmpt::module::read call.
* IT: Instrument / sample panning was reset on note-off / fade commands.
* IMF: Set Finetune is now implemented correctly.
* Fixed excessive memory consumption with malformed files in various formats.
* Sun Mar 14 2021 Mia Herkt - Update to 0.5.6:
* AMS: Avoid allocating excessive amount of memory for compressed song message in malformed files.
* S3M: Some samples or OPL patches were imported with a too high sample rate if module was saved with Scream Tracker 3.
* Tue Feb 02 2021 Mia Herkt - Update to 0.5.5:
* [Bug] stb_vorbis: Fix decoding of Vorbis streams without comments which affected most Vorbis samples since stb_vorbis v1.20.
* openmpt::ext::interactive::set_pitch_factor wasn’t applied to OPL voices.
* OPL channel state (in particular current patch) is now updated when seeking.
* The FT2 tremolo quirk is now also applied to MOD files. FT2 just copied the quirky code from ProTracker!
* DMF: Preserve effects better in some situations where there is more than one effect in a pattern cell.
* DMF: Improve import of finetune effect with parameters larger than +/-15.
* Wed Dec 16 2020 Mia Herkt - Update to 0.5.4:
* AMS: An upper bound for uncompressed sample size is now established to avoid memory exhaustion from malformed files.
* DMF: Support early format beta versions (in particular versions 1-4).
* MED: Also use octave wrapping in 8-channel mode for MMD0/MMD1 modules.
* MED: If 8-channel mode is activated, ignore BPM mode.
* MED: Emulate tempo commands F01 and F02 quirk.
* MED: Tempo commands below 32 BPM were interpreted as tempo slides.
* IMF: Instrument sample mapping was off by one octave, notable in the guitar part of Astaris by Karsten Koch. Changes in 0.5.3:
* [Sec] Possible hang if a MED file claimed to contain 256 songs.
* [Bug] libopenmpt: openmpt::is_extension_supported2() exported symbol was missing (C++).
* [Bug] openmpt::module::set_position_seconds sometimes behaved as if the song end was reached when seeking into a pattern loop and in some other corner cases.
* Increase threshold for ignoring panning commands from 820 to 830.
* Subsong names now fall back to the first pattern’s name if empty.
* MO3: Avoid certain ModPlug hacks from being fixed up twice, which could lead to e.g. very narrow pan swing range for old OpenMPT IT files saved with a recent MO3 encoder version.
* MO3: Some files with corrupted envelope data could be rejected completely (normally libopenmpt should fix up the envelope data).
* MO3: Song metadata didn’t correctly identify MPTM as source format (it appeared as IT instead).
* STM: Change tempo computation to behave like Scream Tracker 2.3 instead of Scream Tracker 2.2, as the playback frequencies we use for sample playback are closer to those of Scream Tracker 2.3.
* PLM: Percentage offset (Mxx) was slightly off.
* WOW: Fix loading of several files and harden WOW detection. Changes in 0.5.2:
* PP20: The first few bytes of some files were not decompressed properly, making some files unplayable (depending on the original format). Changes in 0.5.1:
* [Bug] libopenmpt/libopenmpt.h failed to compile with LIBOPENMPT_NO_DEPRECATE defined.
* MPTM: Qxy now retriggers OPL notes if new compatibility flag is set in file.
* MPTM: Bring back old OPL note end-of-envelope behaviour for files made with OpenMPT 1.28.
* IT: Global volume slides with both nibbles set preferred the “slide up” nibble over the “slide down” nibble in old OpenMPT versions, unlike other slides. Such old files are now imported correctly again.
* IT: Fixed an edge case where, if the filter hit full cutoff / no resonance on the first tick of a row where a new delayed note would be triggered, the filter would be disabled even though it should stay active. Fixes trace.it by maddie.
* OXM: Some sample loops were not imported correctly.
* XM: Out-of-range arpeggio clamping behaviour broke in OpenMPT 1.23.05.00. The arpeggios in Binary World by Dakota now play correctly again.
* S3M: Support old-style sample pre-amp value in very early S3M files.
* S3M: Only force-enable fast slides for files ST 3.00. Previously, any S3M file made with an ST3 version older than 3.20 enabled them.
* S3M: Only apply volume and middle-C speed on instrument change if the new sample slot has sample data.
* MOD: Fix an infinite loop in GamerMan by MrGamer by playing non-ProTracker MODs more like FT2 would.
* M15: Improve tracker detection heuristics to never assume SoundTracker 2.0 if there is a huge number of Dxx commands, as that is a definite hint that they should be treated as volume slides. Fixes Monty On The Run by Master Blaster.
* MO3: Support OPL patches in MO3 files created from MPTM and S3M
* DBM: If a global pattern command would be lost because both effect commands in a cell would have to go into the regular effect column (e.g. a speed and a tempo command), the lost command is now attempted to be written into a different cell on the same row. Fixes “Party-Question V” by grogon.
* Sun Jun 07 2020 Dave Plater - Remove devel packages requirement on obsolete modplug
* Sun May 24 2020 Mia Herkt - Drop libmodpulg-pcfile.patch- Update to 0.5.0:
* [New] OggMod compressed FastTracker 2 XM (OXM) modules are now supported.
* [New] The emulated Amiga type when Amiga resampler emulation is enabled can now be selected via ctl render.resampler.emulate_amiga_type. Possible values are: \"auto\", \"a500\", \"a1200\", and an experimental option \"unfiltered\".
* [New] libopenmpt: New API openmpt::module::get_current_estimated_bpm() (C++), and openmpt_module_get_current_estimated_bpm() (C) which provides accurate beats per minute information for module formats with time signature and an educated guess based on speed and tempo for others.
* [New] libopenmpt: New type-aware ctl APIs that do not require memory allocations and are thus realtime-safe: openmpt::module::ctl_get_boolean(), openmpt::module::ctl_get_integer(), openmpt::module::ctl_get_floatingpoint(), openmpt::module::ctl_get_text(), openmpt::module::ctl_set_boolean(), openmpt::module::ctl_set_integer(), openmpt::module::ctl_set_floatingpoint() (C++), and openmpt_module_ctl_get_boolean(), openmpt_module_ctl_get_integer(), openmpt_module_ctl_get_floatingpoint(), openmpt_module_ctl_get_text(), openmpt_module_ctl_set_boolean(), openmpt_module_ctl_set_integer(), openmpt_module_ctl_set_floatingpoint() (C).
* [New] libopenmpt C++ New API openmpt::is_extension_supported2() which takes a std::string_view parameter instead of std::string.
* [New] libopenmpt C++: New API openmpt::module::module(std::vector data), openmpt::module::module(const std::byte
* data, std::size_t size), openmpt::module::module(const std::byte
* beg, const std::byte
* end).
* [New] libopenmpt C++: New API openmpt::probe_file_header(flags, const std::byte
* data, std::size_t size, filesize), openmpt::probe_file_header(flags, const std::byte
* data, std::size_t size).
* [New] libopenmpt_ext C++: New API openmpt::module_ext::module_ext(std::vector data), openmpt::module_ext::module_ext(const std::byte
* data, std::size_t size), openmpt::module_ext::module_ext(std::vector data), openmpt::module_ext::module_ext(const std::uint8_t
* data, std::size_t size).
* [Change] std::istream based file I/O has been speed up.
* [Change] Dependency on iconv on Linux has been removed.
* [Regression] libmodplug: The libmodplug emulation layer has been removed from the libopenmpt tree. Please use the separate libopenmpt-modplug package instead.
* [Regression] Support for building with C++11 or C++14 has been removed. C++17 is now required to build libopenmpt.
* [Regression] Support for client code using C++11 or C++ 14 has been removed. C++17 is now required to build libopenmpt client applications.
* [Regression] Support for GCC 4.8, 4.9, 5, 6 has been removed.
* [Regression] Support for Clang 3.6, 3.7, 3.8, 3.9, 4 has been removed.
* [Regression] Support for Emscripten versions older than 1.39.1 has been removed.
* [Regression] openmpt123: Support for SDL1 (but not SDL2) output has been removed.
* [Regression] openmpt123: Support for SDL2 older than 2.0.4 has been removed.
* [Regression] It is no longer possible to optionally use iconv for character set conversions.
* [Bug] openmpt123: openmpt123 now honors the current locale and outputs text appropriately.
* Greatly improved MED import. Synthesized instruments are still not supported but support was added for: Multisampled instruments, delta samples, more pattern commands, Hold and Decay, VSTi and MIDI output, multiple songs and many other small changes.
* Improved OPL channel allocation when more than 18 notes are active, so that channels that have completely faded out are prioritized over channels that have already been released but have not faded out yet.
* Interactively triggering an OPL instrument could cause the first pattern channel to no longer be played back correctly.
* Fix some inaccuracies in OPL emulator.
* Fix overflow of OPL amplification happening at a synth volume level of 510.
* End-of-sample pop reduction of surround channels was applied to front channels instead, causing a pop on the front channels instead of removing it on the back channels.
* IT: Disable retrigger with short notes quirk for modules saved with Chibi Tracker, as it does not implement that quirk.
* IT: Instrument and sample panning should not override channel panning for following notes.
* IT: SBx is now prioritized over Bxx commands that are to the left of it.
* IT: Duplicate Check Type “Sample” should only be applied if the instruments match, too.
* IT: Duplicate Check Type “Note” should compare pattern notes, but it was comparing the new pattern note against the old translated note.
* IT: Various fixes for envelope resetting.
* IT / S3M: When combining SBx and EEx effects, don’t skip the first row of the loop like in FastTracker 2.
* S3M: Empty pattern commands now affect effect memory as well.
* S3M: Offset beyond loop end wraps around to loop start like in Scream Tracker 3 + GUS (previously it just keep playing from the loop start, which is neither what GUS nor Sound Blaster drivers do).
* S3M: Notes cannot be retriggered after they have been cut.
* S3M: Fix portamento after note cut (fixes antediluvian_song.s3m).
* S3M / MOD: Previous note offset is no longer used for retriggered notes if there was no instrument number next to the Qxy effect.
* MOD: Sample swapping now also works if the sample that is being swapped from does not loop. Swapping to a non-looped sample now stops playback once the swapped-from sample reaches its (loop) end.
* MOD: Fix early song ending due to ProTracker pattern jump quirk (EEx + Dxx on same row) if infinite looping is disabled. Fixes Haunted Tracks.mod by Triace.
* MOD: Previous note offset is no longer used for retriggered notes if there was no instrument number next to the E9x effect.
* MOD: Vibrato type “ramp down” was upside down.
* XM: If a file contains patterns longer than 1024 rows, they are now clamped to 1024 rows instead of 64 rows.
* XM: Do not reset note-off status on portamento if there is no instrument number.
* Mon Apr 13 2020 Mia Herkt - Update to 0.4.12:
* IT: Vibrato was too fast in Old Effects mode since libopenmpt 0.3.
* XM: Treat 8bitbubsy’s FT2 clone exactly like Fasttracker 2 with respect to compatibility and playback flags. For example, FT2 Pan Law was not applied.
* DMF: Some files had a wrong tempo since libopenmpt 0.2.5705-beta15.
* Thu Jan 30 2020 Tomáš Chvátal - Update to 0.4.11:
* The “date” metadata could contain a bogus date for some older IT files.
* Do not apply global volume ramping from initial global volume when seeking.
* MTM: Sample loop length was off by one.
* PSM: Sample loop length was off by one in most files.
* MOD: Fix initial instrument change with no note playing.
* Thu Oct 03 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.9 bsc#1153102 CVE-2019-17113
* [Sec] libmodplug: C API: Limit the length of strings copied to the output buffer of ModPlug_InstrumentName() and ModPlug_SampleName() to 32 bytes (including terminating null) as is done by original libmodplug. This avoids potential buffer overflows in software relying on this limit instead of querying the required buffer size beforehand. libopenmpt can return strings longer than 32 bytes here beacuse the internal limit of 32 bytes applies to strings encoded in arbitrary character encodings but the API returns them converted to UTF-8, which can be longer. (reported by Antonio Morales Maldonado of Semmle Security Research Team) (r12129)
* [Sec] libmodplug: C++ API: Do not return 0 in CSoundFile::GetSampleName() and CSoundFile::GetInstrumentName() when a null output pointer is provided. This behaviour differed from libmodplug and made it impossible to determine the required buffer size. (r12130)
* Tue Oct 01 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.8:
* [Sec] Possible crash due to out-of-bounds read when playing an OPL note with active filter in S3M or MPTM files (r12118).- Update to version 0.4.7:
* J2B: Ignore notes with non-existing instrument (fixes Ending.j2b)
* Sun Aug 11 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.6:
* Detect IT files unpacked with early UNMO3 versions.
* Mon May 27 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.5:
* [Sec] Possible crash during playback due out-of-bounds read in XM and MT2 files
* Breaking out of a sustain loop through Note-Off sometimes didn’t continue in the regular sample loop
* Seeking did not stop notes playing with XM Key Off (Kxx) effect
* Sun Apr 07 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.4:
* [Bug] Channel VU meters were swapped.
* Startrekker: Clamp speed to 31 ticks per row.
* MTM: Ignore unused Exy commands on import. Command E5x (Set Finetune) is now applied correctly.
* MOD: Sample swapping was always enabled since it has been separated from the ProTracker 1/2 compatibility flag. Now it is always enabled for Amiga-style modules and otherwise the old heuristic is used again.
* Mon Feb 11 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.3:
* [Sec] Possible crash due to null-pointer access when doing a portamento from an OPL instrument to an empty instrument note map slot.
* IT: Various fixes for note-off + instrument number in Old Effects mode.
* MO3: Import IT row highlights as written by MO3 2.4.1.2 or newer. Required for modules using modern tempo mode.
* Tue Jan 22 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.2 bsc#1143582 CVE-2019-14382 bsc#1143584 CVE-2019-14383:
* [Sec] DSM: Assertion failure during file parsing with debug STLs.
* [Sec] J2B: Assertion failure during file parsing with debug STLs.
* S3M: Allow volume change of OPL instruments after Note Cut.
* Sun Jan 06 2019 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.1:
* [Bug] libmodplug: Public symbols of the C++ API had visibility=hidden set on non-MSVC systems, which made them not publicly accessible.
* MO3: Apply playback changes based on “ModPlug-made” header flag- Drop libmodplug-no-exported-cpp-api-quickfix-v1.patch
* Tue Jan 01 2019 antoine.belvireAATTopensuse.org- Add libmodplug-no-exported-cpp-api-quickfix-v1.patch: Add missing CSoundFile compat API (bug #1180).
* Sun Dec 23 2018 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.4.0 bsc#1143581 CVE-2018-20860:
* [New] libopenmpt now includes emulation of the OPL chip and thus plays OPL instruments in S3M, C67 and MPTM files. OPL chip emulation volume can be changed with the new ctl render.opl.volume_factor.
* [New] libopenmpt now supports CDFM / Composer 670 module files.
* [New] libopenmpt: New ctl play.at_end can be used to change what happens when the song end is reached: - “fadeout”: Fades the module out for a short while. Subsequent reads after the fadeout will return 0 rendered frames. This is the default and identical to the behaviour in previous libopenmpt versions. - “continue”: Returns 0 rendered frames when the song end is reached. Subsequent reads will continue playing from the song start or loop start. This can be used for custom loop logic, such as loop auto-detection and longer fadeouts. - “stop”: Returns 0 rendered frames when the song end is reached. Subsequent reads will return 0 rendered frames.
* [New] Add new metadata fields \"originaltype\" and \"originaltype_long\" which allow more clearly reflecting what is going on with converted formats like MO3 and GDM.
* [Change] openmpt123: openmpt123 now rejects --output-type in - -ui and --batch modes and also rejects --output in --render mode. These combinations of options really made no sense and were rather confusing.
* [Regression] Support for libmpg123 older than 1.14.0 has been removed.
* [Regression] libmodplug: Support for emulating libmodplug 0.8.7 API/ABI has been removed.
* [Bug] xmp-openmpt: Sample rate and number of output channels were not applied correctly when using per-file settings.
* [Bug] Internal mixer state was not initialized properly when initially rendering in 44100kHz stereo format.
* [Bug] openmpt123: Prevent libsdl2 and libsdl from being enabled at the same time because they conflict with each other.
* [Bug] libmodplug: Setting SNDMIX_NORESAMPLING in the C++ API always resulted in linear interpolation instead of nearest neighbour
* IT: In Compatible Gxx mode, allow sample changes next to a tone portamento effect if a previous sample has already stopped playing.
* IT: Fix broken volume envelopes with negative values as found in breakdwn.it by Elysis.
* MOD: Slides and delayed notes are executed on every repetition of a row with row delay (fixes “ode to protracker”).
* XM: If the sustain point of the panning envelope is reached before key-off, it is never released.
* XM: Do not default recall volume / panning for delayed instrument-less notes
* XM :E60 loop bug was not considered in song length calucation.
* S3M: Notes without instrument number use previous note’s sample offset.
* Tighten M15 and MOD file rejection heuristics.
* J2B: Ignore frequency limits from file header. Fixes Medivo.j2b, broken since libopenmpt-0.2.6401-beta17.
* STM: More accurate tempo calculation.
* STM: Better support for early format revisions (no such files have been found in the wild, though).
* STM: Last character of sample name was missing.
* SFX: Work around bad conversions of the “Operation Stealth” soundtrack by turning pattern breaks into note stops.
* IMF: Filter cutoff was upside down and the cutoff range was too small.
* ParamEq plugin center frequency was not limited correctly.
* Keep track of active SFx macro during seeking.
* The “note cut” duplicate note action did not volume-ramp the previously playing sample.
* A song starting with non-existing patterns could not be played.
* DSM: Support restart position and 16-bit samples.
* DTM: Import global volume.
* MOD: Support notes in octave 2, like in FastTracker 2 (fixes DOPE.MOD).
* Do not apply Amiga playback heuristics to MOD files that have clearly been written with a PC tracker.
* MPTM: More logical release node behaviour.
* Subsong search is now less thorough. It could previously find many subsongs that are technically correct (unplayed rows at the beginning of patterns that have been jumped over due to pattern breaks), but so far no real-world module that would require such a thorough subsong detection was found. The old mechanism caused way more false positives than intended with real-world modules, though.
* Restrict the unpacked size of compressed DMF, IT, MDL and MO3 samples to avoid huge allocations with malformed small files.
* Mon Oct 22 2018 Martin Herkt <9+suseAATTcirno.systems>- Update to version 0.3.13:
* [Sec] Crash with malformed MED files.
* Transposed samples in AMF ASYLUM modules were not played correctly.
* Notes triggered by libopenmpt_ext play_note could be played with a panbrello effect if the same virtual channel was previously used with panbrello.
* Clicks when stopping channels that didn’t end at zero volume.
* XM: Do not import non-standard commands N and M as channel volume commands.
* Mon Sep 24 2018 9+suseAATTcirno.systems- Update to version 0.3.12:
* [Bug] libmodplug: Setting SNDMIX_NORESAMPLING in the C++ API always resulted in linear interpolation instead of nearest neighbour.
* libopenmpt now compiles without warnings with GCC 8.
* Jump commands on the same row as the end of a pattern loop covering the restart position of the module could cause the module to loop even when looping was disabled.
* MO3: Reject overly long MP3 and Vorbis samples.
* play_note from the libopenmpt_ext interface sometimes silenced the start of a triggered sample.
* Sat Jul 28 2018 9+suseAATTcirno.systems- Update to version 0.3.11 bsc#1143578 CVE-2018-20861:
* [Sec] Crash with some malformed custom tunings in MPTM files
* Channels whose volume envelope was playing at volume 0 while being moved to a NNA background channel were cut off completely since libopenmpt 0.3.8.
* AMF (ASYLUM): Convert 7-bit panning to 8-bit panning for playback- Update to version 0.3.10:
* [Bug] Internal mixer state was not initialized properly when initially rendering in 44100kHz stereo format.
* [Bug] AMF: Undefined behaviour in loader code could lead to files playing silent.
* Switching between instruments with portamento did not update the NNA settings for the new instrument.
* FAR: Properly import volume commands.
* [Sec] Possible write near address 0 in out-of-memory situations when reading AMS files.
* [Bug] openmpt123: Fixed build failure in C++17 due to use of removed feature std::random_shuffle.
* STM: Having both Bxx and Cxx commands in a pattern imported the Bxx command incorrectly.
* STM: Last character of sample name was missing.
* Speed up reading of truncated ULT files.
* ULT: Portamento import was sometimes broken.
* The resonant filter was sometimes unstable when combining low-volume samples, low cutoff and high mixing rates.
* Mon May 28 2018 tchvatalAATTsuse.com- Up to 0.3.9:
* [Sec] Possible write near address 0 in out-of-memory situations when reading AMS files (bsc#1095644 CVE-2018-11710)
* [Bug] openmpt123: Fixed build failure in C++17 due to use of removed feature std::random_shuffle.
* STM: Having both Bxx and Cxx commands in a pattern imported the Bxx command incorrectly.
* STM: Last character of sample name was missing.
* Speed up reading of truncated ULT files.
* ULT: Portamento import was sometimes broken.
* The resonant filter was sometimes unstable when combining low-volume samples, low cutoff and high mixing rates.
* Thu Apr 19 2018 9+suseAATTcirno.systems- Update to 0.3.8
* [Sec] Possible out-of-bounds memory read with IT / ITP / MO3 files containing pattern loops (CVE-2018-10017, bsc#1089080)
* Keep track of active SFx macro during seeking.
* The \"note cut\" duplicate note action did not volume-ramp the previously playing sample.
* A song starting with non-existing patterns could not be played.
* DSM: Support restart position and 16-bit samples.
* DTM: Import global volume.
* Wed Mar 21 2018 tchvatalAATTsuse.com- Version update to 0.3.7:
* Various speedup improvements and features all around
* Fuzzying fixes
* Fri Jul 14 2017 tchvatalAATTsuse.com- Version update to 0.2.8461-beta26 bsc#1048666 CVE-2017-11311:
* various small fixes and seciruity tweaks
* Mon Jun 19 2017 zaitorAATTopensuse.org- Add libopenmpt0 and libopenmpt_modplug1 to baselibs.conf too.
* Wed Jun 14 2017 olafAATTaepfle.de- baselibs.conf for libmodplug.so.1
* Mon May 22 2017 tchvatalAATTsuse.com- Add patch fixing issue bsc#1040149 wrong includedir propagation:
* libmodpulg-pcfile.patch
* Mon May 22 2017 tchvatalAATTsuse.com- Version update to 0.2.8043-beta23
* foo_openmpt: Interpolation filter and volume ramping settings were confused in previous versions. This version resets both to the defaults.- Make mpg123 on by default
* Mon Mar 27 2017 tchvatalAATTsuse.com- Update to 0.2.7774-beta22- Make mpg123 conditional and disabled for now by default- Fix the Factory build with the new rpm
* Sun Feb 19 2017 jengelhAATTinai.de- Update summaries and descriptions.- Enable the SDL2 driver as an option, as the portaudio driver appears to hang with ALSA (and not everyone runs Pulseaudio).
* Sun Feb 19 2017 tchvatalAATTsuse.com- Initial package containing libopenmod more updated secure alternative bsc#1022032