Changelog for postfix-doc-3.9.0-lp152.483.1.noarch.rpm :

* Tue Sep 24 2024 Peter Varkoly - Missing posttls-finger in postfix though changes mention it (bsc#1221501)
* Fri Aug 09 2024 Thorsten Kukuk - Remove rcpostfix symlink [jsc#PED-266]
* Wed Aug 07 2024 Thorsten Kukuk - postfix-script requires cmp
* Thu Aug 01 2024 Peter Varkoly - postfix gives warnings about deprecated parameters (bsc#1225397)
* Tue Jun 18 2024 chrisAATTcomputersalat.de- fix for Invalid cross-device link
* failed to create hard link \'etc/localtime\' => \'/usr/share/zoneinfo/Etc/UTC\'
* Tue Jun 11 2024 Adam Majer - Set built-in path values to suse values (bsc#1215689)
* Mon May 20 2024 chrisAATTcomputersalat.de- Update update_chroot.systemd
* Add missing checks for DKIM (openDKIM)- keep spec and changes files in sync
* Fri May 17 2024 Peter Varkoly - config.postfix needs updating (bsc#1224207)
* chkconfig -> systemctl
* Link Cyrus lmtp only if this exsists
* /usr/lib64/sasl2 does not need to exist
* Fetch timezone via readlink from /etc/localtime
* Fri Apr 05 2024 Georg Pfuetzenreuter - Move qshape(1) out of -doc, install it as a binary with the main package
* Thu Mar 07 2024 Arjen de Korte - update to 3.9.0
* As described in DEPRECATION_README, the SMTP server features \"permit_naked_ip_address\", \"check_relay_domains\", and \"reject_maps_rbl\" have been removed, after they have been logging a warning for some 20 years. These features now log a warning and return a \"server configuration error\" response.
* The MySQL client no longer supports MySQL versions < 4.0. MySQL version 4.0 was released in 2003.
* As covered in DEPRECATION_README, the configuration parameter \"disable_dns_lookup\" and about a dozen TLS-related parameters are now officially obsolete. These parameters still work, but the postconf command logs warnings that they will be removed from Postfix.
* As covered in DEPRECATION_README, \"permit_mx_backup\" logs a warning that it will be removed from Postfix.
* In message headers, Postfix now formats numerical days as two-digit days, i.e. days 1-9 have a leading zero instead of a leading space. This change was made because the RFC 5322 date and time specification recommends (i.e. SHOULD) that a single space be used in each place that folding white space appears. This change avoids a breaking change in the length of a date string.
* The MySQL client default characterset is now configurable with the \"charset\" configuration file attribute. The default is \"utf8mb4\", consistent with the MySQL 8.0 built-in default, but different from earlier MySQL versions where the built-in default was \"latin1\".
* Support to query MongoDB databases, contributed by Hamid Maadani, based on earlier code by Stephan Ferraro. See MONGODB_README and mongodb_table(5)
* The RFC 3461 envelope ID is now exported in the local(8) delivery agent with the ENVID environment variable, and in the pipe(8) delivery agent with the ${envid} command-line attribute.
* Configurable idle and retry timer settings in the mysql: and pgsql: clients. A shorter than default retry timer can sped up the recovery after error, when Postfix is configured with only one server in the \"hosts\" attribute. After the code was frozen for release, we have learned that Postfix can recover faster from some errors when the single server is specified multiple times in the \"hosts\" attribute.
* Optional Postfix TLS support to request an RFC7250 raw public key instead of an X.509 public-key certificate. The configuration settings for raw key public support will be ignored when there is no raw public key support in the local TLS implementation (i.e. Postfix with OpenSSL versions before 3.2). See RELEASE_NOTES for more information.
* Preliminary support for OpenSSL configuration files, primarily OpenSSL 1.1.1b and later. This introduces two new parameters \"tls_config_file\" and \"tls_config_name\", which can be used to limit collateral damage from OS distributions that crank up security to 11, increasing the number of plaintext email deliveries. Details are in the postconf(5) manpage under \"tls_config_file\" and \"tls_config_name\".
* With \"smtpd_forbid_unauth_pipelining = yes\" (the default), Postfix defends against multiple \"blind\" SMTP attacks. This feature was back-ported to older stable releases but disabled by default.
* With \"smtpd_forbid_bare_newline = normalize\" (the default) Postfix defends against SMTP smuggling attacks. See RELEASE_NOTES for details. This feature was back-ported to older stable releases but disabled by default.
* Prevent outbound SMTP smuggling, where an attacker uses Postfix to send email containing a non-standard End-of-DATA sequence, to exploit inbound SMTP smuggling at a vulnerable remote SMTP server. With \"cleanup_replace_stray_cr_lf = yes\" (the default), the cleanup daemon replaces each stray or character in message content with a space character. This feature was back-ported to older stable releases with identical functionality.
* The Postfix DNS client now limits the total size of DNS lookup results to 100 records; it drops the excess records, and logs a warning. This limit is 20x larger than the number of server addresses that the Postfix SMTP client is willing to consider when delivering mail, and is far below the number of records that could cause a tail recursion crash in dns_rr_append() as reported by Toshifumi Sakaguchi. This also introduces a similar limit on the number of DNS requests that a check_
*_
*_access restriction can make. All this was back-ported to older stable releases with identical functionality.- refreshed patch: % postfix-no-md5.patch- change obsoleted \"disable_dns_lookups\" to \"smtp_dns_support_level\" % postfix-SUSE.tar.gz % postfix-main.cf.patch % postfix-master.cf.patch
* Tue Mar 05 2024 Arjen de Korte - update to 3.8.6
* Bugfix (defect introduced: Postfix 2.3, date 20051222): the Dovecot auth client did not reset the \'reason\' from a previous Dovecot auth service response, before parsing the next Dovecot auth server response in the same SMTP session, resulting in a nonsensical \"authentication failed\" warning message. Reported by Stephan Bosch.
* Bugfix (defect introduced: Postfix 3.1, date: 20151128): \"postqueue -j\" produced broken JSON when escaping a control character as \\uXXXX. Found during code maintenance.
* Cleanup: this fixes posttls-finger certificate match expectations for all TLS security levels, including warnings for levels that don\'t implement certificate matching. By Viktor Dukhovni.
* Bugfix (defect introduced: Postfix 2.3): after prepending a header at the top of a message (with an access(5), header_checks(5) or Milter action), the Postfix Milter \"delete header\" or \"update header\" action was skipping the prepended header, instead of skipping the Postfix-generated Received: header. Problem report by Carlos Velasco.
* Workaround: tlsmgr logfile spam. Reportedly, some OS lies under load: it says that a socket is readable, then it says that the socket has unread data, and then it says that read returns EOF, causing Postfix to spam the log with a warning message.
* Bugfix (defect introduced: Postfix 3.4): the SMTP server\'s BDAT command handler could be tricked to read $message_size_limit bytes into memory. Found during code maintenance.
* Safety: limit the total size of DNS lookup results to 100 records; drop the excess records, and log a warning. This limit is 20x larger than the number of server addresses that the Postfix SMTP client is willing to consider when delivering mail, and is far below the number of records that could cause a tail recursion crash in dns_rr_append() as reported by Toshifumi Sakaguchi. This fix also limits the number of DNS requests that a check_
*_
*_access restriction can make.
* Performance, related to the previous problem: eliminate worst-case behavior where the queue manager could defer delivery to all destinations over a specific delivery transport, after only a single delivery agent crash. The scheduler now throttles deliveries to one destination, and allows other deliveries to keep making progress.- change to functioning mirror (http://cdn.postfix.johnriley.me/ has been dead for a while although it is still listed upstream)- make output of %setup less verbose by restoring -q option
* Tue Mar 05 2024 Peter Varkoly - %autosetup does not works with multiple -a. https://github.com/rpm-software-management/rpm/issues/1204
* Thu Feb 29 2024 Dominique Leuenberger - Use %autosetup macro. Allows to eliminate the usage of deprecated %patchN.
* Tue Jan 23 2024 Arjen de Korte - update to 3.8.5
* Security: this release improves support to defend against an email spoofing attack (SMTP smuggling) on recipients at a Postfix server. For background, see https://www.postfix.org/smtp-smuggling.html.
* Sat Jan 06 2024 chrisAATTcomputersalat.de- rework fix for bsc#1192173: keep myhostname and mydestination patched, but with upstream default to have them in correct place when updated via config.postfix- rework SMTP Smuggling defaults
* yes is now alias of \'normalize\' smtpd_forbid_bare_newline = normalize
* another new option is \'reject\' wich should be used in connection with smtpd_forbid_bare_newline_reject_code = 521- rework patches
* postfix-bdb-main.cf.patch
* postfix-main.cf.patch- rebase patches
* postfix-linux45.patch
* postfix-ssl-release-buffers.patch
* postfix-vda-v14-3.0.3.patch
* set-default-db-type.patch- sync changes files
* add missing entries in postfix-bdb.changes
* Thu Dec 28 2023 Dirk Müller - update default configuration to enable the long-term fix for bsc#1218304, bsc#1218314 CVE-2023-51764, SMTP smuggling attack:
* smtpd_forbid_bare_newline = yes
* smtpd_forbid_bare_newline_exclusions = $mynetworks
* Fri Dec 22 2023 Arjen de Korte - update to 3.8.4 (bsc#1218304, CVE-2023-51764):
* Security: this release adds support to defend against an email spoofing attack (SMTP smuggling) on recipients at a Postfix server. For background, see https://www.postfix.org/smtp-smuggling.html
* Fri Nov 03 2023 Arjen de Korte - update to 3.8.3
* Bugfix (defect introduced Postfix 2.5, date 20080104): the Postfix SMTP server was waiting for a client command instead of replying immediately, after a client certificate verification error in TLS wrappermode. Reported by Andreas Kinzler.
* Usability: the Postfix SMTP server (finally) attempts to log the SASL username after authentication failure. In Postfix logging, this appends \", sasl_username=xxx\" after the reason for SASL authentication failure. The logging replaces an unavailable reason with \"(reason unavailable)\", and replaces an unavailable sasl_username with \"(unavailable)\". Based on code by Jozsef Kadlecsik.
* Compatibility bugfix (defect introduced: Postfix 2.11, date 20130405): in forward_path, the expression ${recipient_delimiter} would expand to an empty string when a recipient address had no recipient delimiter. The compatibility fix is to use a configured recipient delimiter value instead. Reported by Tod A. Sandman.
* Mon Oct 23 2023 Peter Varkoly - Syntax error in update_postmaps script (bsc#1216061)
* Mon Sep 18 2023 Peter Varkoly - postfix: config.postfix causes too tight permission on main.cf (bsc#1215372)
* Tue Aug 15 2023 Peter Varkoly - CVE-2023-32182: postfix: config_postfix SUSE specific script potentially bad /tmp file usage (bsc#1211196) Use temp file created by mktemp
* Tue Jun 06 2023 Arjen de Korte - update to 3.8.1
* Optional: harden a Postfix SMTP server against remote SMTP clients that violate RFC 2920 (or 5321) command pipelining constraints. With \"smtpd_forbid_unauth_pipelining = yes\", the server disconnects a client immediately, after responding with \"554 5.5.0 Error: SMTP protocol synchronization\" and after logging \"improper command pipelining\" with the unexpected remote SMTP client input. This feature is disabled by default in Postfix 3.5-3.8 to avoid breaking home-grown utilities, but it is enabled by default in Postfix 3.9. A similar feature is enabled by default in the Exim SMTP server.
* Optional: some OS distributions crank up TLS security to 11, and in doing so increase the number of plaintext email deliveries. This introduces basic OpenSSL configuration file support that may be used to override OS-level settings. Details are in the postconf(5) manpage under tls_config_file and tls_config_name.
* Bugfix (defect introduced: Postfix 1.0): the command \"postconf .. name=v1 .. name=v2 ..\" (multiple instances of the same parameter name) created multiple main.cf name=value entries with the same parameter name. It now logs a warning and skips the earlier name(s) and value(s). Found during code maintenance.
* Bugfix (defect introduced: Postfix 3.3): the command \"postconf - M name1/type1=\'name2 type2 ...\'\" died with a segmentation violation when the request matched multiple master.cf entries. The master.cf file was not damaged. Problem reported by SATOH Fumiyasu.
* Bugfix (defect introduced: Postfix 2.11): the command \"postconf - M name1/type1=\'name2 type2 ...\'\" could add a service definition to master.cf that conflicted with an already existing service definition. It now replaces all existing service definitions that match the service pattern \'name1/type1\' or the service name and type in \'name2 type2 ...\' with a single service definition \'name2 type2 ...\'. Problem reported by SATOH Fumiyasu.
* Bugfix (defect introduced: Postfix 3.8) the posttls-finger command could access uninitialized memory when reconnecting. This also fixes a malformed warning message when a destination contains \":service\" information. Reported by Thomas Korbar.
* Bugfix (defect introduced: Postfix 3.2): the MySQL client could return \"not found\" instead of \"error\" (for example, resulting in a 5XX SMTP status instead of 4XX) during the time that all MySQL server connections were turned down after error. Found during code maintenance. File: global/dict_mysql.c. This was already fixed in Postfix 3.4-3.7.
* Thu May 04 2023 Dominique Leuenberger - Add _multibuild to define 2nd spec file as additional flavor. Eliminates the need for source package links in OBS.
* Tue Apr 18 2023 Arjen de Korte - update to 3.8.0
* Support to look up DNS SRV records in the Postfix SMTP/LMTP client, Based on code by Tomas Korbar (Red Hat). For example, with \"use_srv_lookup = submission\" and \"relayhost = example.com:submission\", the Postfix SMTP client will look up DNS SRV records for _submission._tcp.example.com, and will relay email through the hosts and ports that are specified with those records.
* TLS obsolescence: Postfix now treats the \"export\" and \"low\" cipher grade settings as \"medium\". The \"export\" and \"low\" grades are no longer supported in OpenSSL 1.1.1, the minimum version required in Postfix 3.6.0 and later. Also, Postfix default settings now exclude deprecated or unused ciphers (SEED, IDEA, 3DES, RC2, RC4, RC5), digest (MD5), key exchange algorithms (DH, ECDH), and public key algorithm (DSS).
* Attack resistance: the Postfix SMTP server can now aggregate smtpd_client_
*_rate and smtpd_client_
*_count statistics by network block instead of by IP address, to raise the bar against a memory exhaustion attack in the anvil(8) server; Postfix TLS support unconditionally disables TLS renegotiation in the middle of an SMTP connection, to avoid a CPU exhaustion attack.
* The PostgreSQL client encoding is now configurable with the \"encoding\" Postfix configuration file attribute. The default is \"UTF8\". Previously the encoding was hard-coded as \"LATIN1\", which is not useful in the context of SMTP.
* The postconf command now warns for #comment in or after a Postfix parameter value. Postfix programs do not support #comment after other text, and treat that as input.- rebase/refresh patches
* pointer_to_literals.patch
* postfix-linux45.patch
* postfix-master.cf.patch
* postfix-ssl-release-buffers.patch
* set-default-db-type.patch
* Sat Feb 25 2023 Otto Hollmann - update to 3.7.4
* Workaround: with OpenSSL 3 and later always turn on SSL_OP_IGNORE_UNEXPECTED_EOF, to avoid warning messages and missed opportunities for TLS session reuse. This is safe because the SMTP protocol implements application-level framing, and is therefore not affected by TLS truncation attacks.
* Workaround: OpenSSL 3.x EVP_get_digestbyname() can return lazily-bound handles for digest implementations. In sufficiently hostile configurations, Postfix could mistakenly believe that a digest algorithm is available, and fail when it is not. A similar workaround may be needed for EVP_get_cipherbyname().
* Bugfix (bug introduced in Postfix 2.11): the checkok() macro in tls/tls_fprint.c evaluated its argument unconditionally; it should evaluate the argument only if there was no prior error.
* Bugfix (bug introduced in Postfix 2.8): postscreen died with a segmentation violation when postscreen_dnsbl_threshold < 1. It should reject such input with a fatal error instead.
* Bitrot: fixes for linker warnings from newer Darwin (MacOS) versions.
* Portability: Linux 6 support.
* Added missing documentation that cidr:, pcre: and regexp: tables support inline specification only in Postfix 3.7 and later.
* Rebased postfix-linux45.patch
* Thu Feb 09 2023 Peter Varkoly - SELinux: postfix denied to access /var/spool/postfix/pid/master.pid (bsc#1207177) Apply proposed changes in postfix.service- remove patch included into the source: harden_postfix.service.patch
* Wed Jan 25 2023 Thorsten Kukuk - Disable NIS support on Factory (deprecated and will be removed)
* Wed Jan 18 2023 Hu - Fix SELinux labeling issue caused by /usr/sbin/config.postfix (bsc#1207227).
* Mon Nov 14 2022 Peter Varkoly - postfix default main.cf myhostname default causes conflict (bsc#1192173) Use the postfix build in defaults for myhostname and mydestination
* Sun Oct 09 2022 Michael Ströder - update to 3.7.3
* Fixed a bug where some messages were not delivered after \"warning: Unexpected record type \'X\'. (bsc#1213515)
* Workaround: in a TLS server disable Postfix\'s 1-element internal session cache, to work around an OpenSSL 3.0 regression that broke TLS handshakes.
* Code health: the fix for milter_header_checks (3.7.1, 3.6.6, 3.5.16, 3.4.26) introduced a missing msg_panic() argument (in code that never executes).
* Code health: Postfix 3.3.0 introduced an uninitialized verify_append() request status in case of a null original recipient address.
* Postfix 3.5.0 introduced debug logging noise in map_search_create().
* Tue Sep 06 2022 Ludwig Nussel - own /var/spool/mail (boo#1179574)
* Thu Aug 04 2022 chrisAATTcomputersalat.de- use correct source signature file (gpg2)
* Mon Jul 11 2022 chrisAATTcomputersalat.de- update to 3.7.2 https://de.postfix.org/ftpmirror/official/postfix-3.7.2.RELEASE_NOTES- rebase patches
* pointer_to_literals.patch
* postfix-linux45.patch
* postfix-main.cf.patch
* postfix-master.cf.patch
* postfix-no-md5.patch
* postfix-ssl-release-buffers.patch
* postfix-vda-v14-3.0.3.patch
* set-default-db-type.patch- build against libpcre2
* Tue May 10 2022 chrisAATTcomputersalat.de- remove
*.swp from postfix-SUSE.tar.gz
* Tue May 03 2022 chrisAATTcomputersalat.de- fix config.postfix \'hash\' leftover with relay_recipients- update postfix-main.cf.patch about
* smtp_tls_security_level (obsoletes smtp_use_tls, smtp_enforce_tls)
* smtpd_tls_security_level (obsoletes smtpd_use_tls, smtpd_enforce_tls)- rebase/refresh patches
* harden_postfix.service.patch
* postfix-avoid-infinit-loop-if-no-permission.patch
* postfix-master.cf.patch
* postfix-vda-v14-3.0.3.patch
* set-default-db-type.patch
* Mon May 02 2022 Dominique Leuenberger - Change ed requires to /usr/bin/ed: allow busybox-ed to be used inside containers.
* Mon Apr 25 2022 Marcus Rueckert - add missing requires for config.postfix and the postfix postinstall script: perl and ed
* Mon Apr 18 2022 Michael Ströder - update to 3.6.6
* (problem introduced: Postfix 2.7) The milter_header_checks maps are now opened before the cleanup(8) server enters the chroot jail.
* In an internal client module, \"host or service not found\" was a fatal error, causing the milter_default_action setting to be ignored. It is now a non-fatal error, just like a failure to connect.
* The proxy_read_maps default value was missing up to 27 parameter names. The corresponding lookup tables were not automatically authorized for use with the proxymap(8) service. The parameter names were ending in _checks, _reply_footer, _reply_filter, _command_filter, and _delivery_status_filter.
* (problem introduced: Postfix 3.0) With dynamic map loading enabled, an attempt to create a map with \"postmap regexp:path\" would result in a bogus error message \"Is the postfix-regexp package installed?\" instead of \"unsupported map type for this operation\". This happened with all non-dynamic map types (static, cidr, etc.) that have no \'bulk create\' support.
* Mon Apr 04 2022 Peter Varkoly - config.postfix fails to set smtp_tls_security_level (bsc#1192314)
* Tue Mar 29 2022 Илья Индиго - Refreshed spec-file via spec-cleaner and manual optimizated.
* Added -p flag to all install commands.
* Removed -f flag from all ln commands.- Changed file harden_postfix.service.patch (boo#1191988).
* Fri Mar 18 2022 Michael Ströder - update to 3.6.5
* Glibc 2.34 implements closefrom(). This was causing a conflict with Postfix\'s implementation for systems that have no closefrom() implementation.
* Support for Berkeley DB version 18.- removed obsolete postfix-3.6.2-glibc-234-build-fix.patch
* Mon Mar 14 2022 Peter Varkoly - Postfix on start don\'t run postalias /etc/postfix/aliases (error open database /etc/postfix/aliases.lmdb). (bsc#1197041) Apply proposed patch
* Wed Feb 09 2022 Peter Varkoly - config.postfix can\'t handle symlink\'d /etc/resolv.cof (bsc#1195019) Adapt proposed change: using \"cp -afL\" by copying.
* Tue Jan 18 2022 Michael Ströder - Update to 3.6.4
* Bug introduced in bugfix 20210708: duplicate bounce_notice_recipient entries in postconf output. This was caused by an incomplete fix to send SMTP session transcripts to $bounce_notice_recipient.
* Bug introduced in Postfix 3.0: the proxymap daemon did not automatically authorize proxied maps inside pipemap (example: pipemap:{proxy:maptype:mapname, ...}) or inside unionmap.
* Bug introduced in Postfix 2.5: off-by-one error while writing a string terminator. This code passed all memory corruption tests, presumably because it wrote over an alignment padding byte, or over an adjacent character byte that was never read.
* The proxymap daemon did not automatically authorize map features added after Postfix 3.3, caused by missing
*_maps parameter names in the proxy_read_maps default value. Found during code maintenance.
* Mon Nov 08 2021 Michael Ströder - Update to 3.6.3
* (problem introduced in Postfix 2.4, released in 2007): queue file corruption after a Milter (for example, MIMEDefang) made a request to replace the message body with a copy of that message body plus additional text (for example, a SpamAssassin report).
* (problem introduced in Postfix 2.10, released in 2012): The postconf \"-x\" option could produce incorrect output, because multiple functions were implicitly sharing a buffer for intermediate results. Problem report by raf, root cause analysis by Viktor Dukhovni.
* (problem introduced in Postfix 2.11, released in 2013): The check_ccert_access feature worked as expected, but produced a spurious warning when Postfix was built without SASL support. Fix by Brad Barden.
* Fix for a compiler warning due to a missing \'const\' qualifier when compiling Postfix with OpenSSL 3. Depending on compiler settings this could cause the build to fail.
* The known_tcp_ports settings had no effect. It also wasn\'t fully implemented. Problem report by Peter.
* Fix for missing space between a hostname and warning text.
* Fri Oct 22 2021 Dirk Stoecker - Ensure postfix can write to home directory or server side filtering wont work (sieve)
* Fri Oct 22 2021 Johannes Segitz - Ensure service can write to /etc/postfix
* Thu Oct 21 2021 Johannes Segitz - Added hardening to systemd service (bsc#1181400). Added harden_postfix.service.patch
* Thu Oct 07 2021 Peter Varkoly - config.postfix not updatet after lmdb switch (bsc#1190945) Adapt config.postfix
* Thu Aug 26 2021 Peter Varkoly - postfix master.cf: to include \"submissions\" service (bsc#1189684) Adapt master.cf patch
* Tue Aug 24 2021 Peter Varkoly - postfix fails with glibc 2.34 Define HAS_CLOSEFROM (bsc#1189101) add patch - postfix-3.6.2-glibc-234-build-fix.patch
* Thu Aug 05 2021 chrisAATTcomputersalat.de- fix config.postfix (follow up of bsc#1188477)
* Mon Jul 26 2021 Peter Varkoly - Syntax error in config.postfix (bsc#1188477)
* Sun Jul 25 2021 Michael Ströder - Update to 3.6.2
* In Postfix 3.6, fixed a false \"Result too large\" (ERANGE) fatal error in the compatibility_level parser, because there was no \'errno = 0\' statement before an strtol() call.
* (problem introduced in Postfix 3.3) \"Null pointer read\" error in the cleanup daemon when \"header_from_format = standard\" (the default as of Postfix 3.3), and email was submitted with /usr/sbin/sendmail without From: header, and an all-space full name was specified in 1) the password file, 2) with \"sendmail - F\", or 3) with the NAME environment variable. Found by Renaud Metrich.
* (problem introduced in Postfix 2.4) False \"too many reverse jump\" warnings in the showq daemon, because loop detection code was comparing memory addresses instead of queue file names. Reported by Mehmet Avcioglu.
* (problem introduced in 1999) The Postfix SMTP server was sending all session transcripts to the error_notice_recipient (default: postmaster), instead of sending transcripts of bounced mail to the bounce_notice_recipient (default: postmaster). Reported by Hans van Zijst.
* The texthash: map implementation broke tls_server_sni_maps, because it did not support multi-file inputs. Reported by Christopher Gurnee, who also found an instance of the missing code in the \"postmap -F\" source code. File: util/dict_thash.c.
* Wed Jul 14 2021 Peter Varkoly - spamd wants to start before mail-transfer-agent.target, but that target doesn\'t exist (bsc#1066854)
* Tue Jul 06 2021 Christian Wittmer - postfix-SUSE
* rework sysconfig.postfix, add - POSTFIX_WITH_DKIM - POSTFIX_DKIM_CONN
* rework config.postfix for main.cf - with_dkim- update postfix-main.cf.patch
* add OpenDKIM settings
* Wed Jun 23 2021 Christian Wittmer - postfix-mysql
* add mysql_relay_recipient_maps.cf- postfix-SUSE
* rework sysconfig.postfix, add - POSTFIX_RELAY_RECIPIENTS - POSTFIX_BACKUPMX
* add relay_recipients
* rework config.postfix for main.cf - is_backupmx - relay_recipient_maps
* Fri Jun 18 2021 Callum Farmer - Add now working CONFIG parameter to sysusers generator- Remove unnecessary group line from postfix-vmail-user.conf
* Mon Jun 14 2021 Michael Ströder - Update to 3.6.1
* Bugfix (introduced: Postfix 2.11): the command \"postmap lmdb:/file/name\" (create LMDB database from textfile) handled duplicate input keys ungracefully, discarding entries stored up to and including the duplicate key, and causing a double free() call with lmdb versions 0.9.17 and later. Reported by Adi Prasaja; double free() root cause analysis by Howard Chu.
* Typo (introduced: Postfix 3.4): silent_discard should be silent-discard in BDAT_README.
* Sun Jun 06 2021 Christian Wittmer - fix postfix-master.cf.patch
* set correct indentation (again) for options of - submission (needs 3 spaces) - smtps (needs 4 spaces) to make config.postfix work nicely again
* Wed Jun 02 2021 Marcus Rueckert - Update to 3.6.0 - Major changes - internal protocol identification Internal protocols have changed. You need to \"postfix stop\" before updating, or before backing out to an earlier release, otherwise long-running daemons (pickup, qmgr, verify, tlsproxy, postscreen) may fail to communicate with the rest of Postfix, causing mail delivery delays until Postfix is restarted. For more see /usr/share/doc/packages/postfix/RELEASE_NOTES- refreshed patches to apply cleanly again: fix-postfix-script.patch ipv6_disabled.patch pointer_to_literals.patch postfix-linux45.patch postfix-main.cf.patch postfix-master.cf.patch postfix-no-md5.patch postfix-ssl-release-buffers.patch postfix-vda-v14-3.0.3.patch set-default-db-type.patch
* Tue Jun 01 2021 Peter Varkoly - (bsc#1186669) - postfix.service has \"Requires=var-run.mount\" Remove bad requirements
* Mon Apr 12 2021 Michael Ströder - Update to 3.5.10 with security fixes:
* Missing null pointer checks (introduced in Postfix 3.4) after an internal I/O error during the smtp(8) to tlsproxy(8) handshake. Found by Coverity, reported by Jaroslav Skarvada. Based on a fix by Viktor Dukhovni.
* Null pointer bug (introduced in Postfix 3.0) and memory leak (introduced in Postfix 3.4) after an inline: table syntax error in main.cf or master.cf. Found by Coverity, reported by Jaroslav Skarvada. Based on a fix by Viktor Dukhovni.
* Incomplete null pointer check (introduced: Postfix 2.10) after truncated HaProxy version 1 handshake message. Found by Coverity, reported by Jaroslav Skarvada. Fix by Viktor Dukhovni.
* Missing null pointer check (introduced: Postfix alpha) after null argv[0] value.
* Wed Mar 10 2021 Peter Varkoly - (bsc#1183305) - config.postfix uses db as suffix for postmaps Depending on DEF_DB_TYPE uses lmdb or db
* Fri Mar 05 2021 Peter Varkoly - (bsc#1182833) - /usr/share/fillup-templates/sysconfig.postfix still refers to /etc/services Use getent to detect if smtps is already defined.
* Fri Feb 05 2021 Peter Varkoly - (bsc#1180473) [Build 20201230] postfix has invalid default config (bsc#1181381) [Build 130.3] openQA test fails in mta, mutt - postfix broken: \"queue file write error\" and \"error: unsupported dictionary type: hash\" Export DEF_DB_TYPE before starting the perl script.
* Wed Jan 27 2021 Peter Varkoly - bsc#1180473 - [Build 20201230] postfix has invalid default config Fixing config.postfix and sysconfig.postfix
* Mon Jan 25 2021 Paolo Stivanin - Update to 3.5.9
* improves the reporting of DNSSEC problems that may affect DANE security
* Thu Jan 07 2021 Arjen de Korte - Only do the conversion from the hash/btree databases to lmdb when the default database type changes from hash to lmdb and do not stop and start the service (the old compiled databases can live together with the new ones) - convert-bdb-to-lmdb.sh- Clean up the specfile
* Remove < 1330 conditional builds
* Use generated postfix-files instead of the obsolete one from postfix-SUSE.tar.gz
* Use dynamicmaps.cf.d instead of modifying dynamicmaps.cf upon (de)installation of optional mysql, pgsql and ldap subpackages
* Use default location for post-install, postfix-tls-script, postfix-wrapper and postmulti-script
* Mon Jan 04 2021 Peter Varkoly - Set lmdb to be the default db.- Convert btree tables to lmdb too. Stop postfix before converting from bdb to lmdb- This package is without bdb support. That\'s why convert must be done without any suse release condition. o remove patch postfix-no-btree.patch o add set-default-db-type.patch
* Fri Dec 25 2020 Arjen de Korte - Set database type for address_verify_map and postscreen_cache_map to lmdb (btree requires Berkeley DB) o add postfix-no-btree.patch
* Fri Dec 25 2020 Arjen de Korte - Set default database type to lmdb and fix update_postmaps script
* Thu Dec 24 2020 Arjen de Korte - Use variable substition instead of sed to remove .db suffix and substitute hash: for lmdb: in /etc/postfix/master.cf as well. Check before substitution if there is something to do (to keep rpmcheck happy).
* Tue Dec 08 2020 Peter Varkoly - bsc#1176650 L3: What is regularly triggering the \"fillup\" command and changing modify-time of /etc/sysconfig/postfix? o Remove miss placed fillup_only call from %verifyscript
* Thu Nov 26 2020 Peter Varkoly - Remove Berkeley DB dependency (JIRA#SLE-12191) The pacakges postfix is build without Berkely DB support. lmdb will be used instead of BDB. The pacakges postfix-bdb is build with Berkely DB support. o add patch for main.cf for postfix-bdb package postfix-bdb-main.cf.patch
* Sun Nov 08 2020 Michael Ströder - Update to 3.5.8
* The Postfix SMTP client inserted into message headers longer than $line_length_limit (default: 2048), causing all subsequent header content to become message body content.
* The postscreen daemon did not save a copy of the postscreen_dnsbl_reply_map lookup result. This has no effect when the recommended texthash: look table is used, but it could result in stale data with other lookup tables.
* After deleting a recipient with a Milter, the Postfix recipient duplicate filter was not updated; the filter suppressed requests to add the recipient back.
* Memory leak: the static: maps did not free their casefolding buffer.
* With \"smtpd_tls_wrappermode = yes\", the smtps service was waiting for a TLS handshake, after processing an XCLIENT command.
* The smtp_sasl_mechanism_filter implementation ignored table lookup errors, treating them as \'not found\'.
* The code that looks for Delivered-To: headers ignored headers longer than $line_length_limit (default: 2048).
* Mon Aug 31 2020 Michael Ströder - Update to 3.5.7
* Fixed random certificate verification failures with \"smtp_tls_connection_reuse = yes\", because tlsproxy(8) was using the wrong global TLS context for connections that use DANE or non-DANE trust anchors.
* Tue Aug 25 2020 Thorsten Kukuk - Move ldap into an own sub-package like all other databases- Move manual pages to correct sub-package
* Fri Aug 21 2020 Thorsten Kukuk - Use sysusers.d to create system accounts- Remove wrong %config for systemd directory content
* Sun Aug 09 2020 Arjen de Korte - Use the correct signature file for source verification- Rename postfix-3.5.6.tar.gz.sig to postfix-3.5.6.tar.gz.asc (to prevent confusion, as the signature file from upstream with .sig extension is incompatible with the build service)
* Sun Jul 26 2020 Michael Ströder - Update to 3.5.6 with following fixes:
* Workaround for unexpected TLS interoperability problems when Postfix runs on OS distributions with system-wide OpenSSL configurations.
* Memory leaks in the Postfix TLS library, the largest one involving multiple kBytes per peer certificate.
* Thu Jul 16 2020 Arjen de Korte - Add source verification (add postfix.keyring)
* Fri Jul 03 2020 Thorsten Kukuk - Use systemd_ordering instead of systemd_require.- Move /etc/postfix/system to /usr/lib/postfix/systemd [bsc#1173688]- Drop /var/adm/SuSEconfig from %post, it does nothing.- Rename postfix-SuSE to postfix-SUSE- Delete postfix-SUSE/README.SuSE, company name spelled wrong, completly outdated and not used.- Delete postfix-SUSE/SPAMASSASSIN+POSTFIX.SuSE, company name spelled wrong, outdated and not used.- sysconfig.mail-postfix: Fix description of MAIL_CREATE_CONFIG, SuSEconfig is gone since ages.- update_chroot.systemd: Remove advice to run SuSEconfig.- Remove rc.postfix, not used, outdated.- mkpostfixcert: Remove advice to run SuSEconfig.
* Mon Jun 29 2020 Michael Ströder - Update to 3.5.4:
* The connection_reuse attribute in smtp_tls_policy_maps always resulted in an \"invalid attribute name\" error.
* SMTP over TLS connection reuse always failed for Postfix SMTP client configurations that specify explicit trust anchors (remote SMTP server certificates or public keys).
* The Postfix SMTP client\'s DANE implementation would always send an SNI option with the name in a destination\'s MX record, even if the MX record pointed to a CNAME record. MX records that point to CNAME records are not conformant with RFC5321, and so are rare. Based on the DANE survey of ~2 million hosts it was found that with the corrected SMTP client behavior, sending SNI with the CNAME-expanded name, the SMTP server would not send a different certificate. This fix should therefore be safe.
* Mon Jun 15 2020 Michael Ströder - Update to 3.5.3:
* TLS handshake failure in the Postfix SMTP server during SNI processing, after the server-side TLS engine sent a TLSv1.3 HelloRetryRequest (HRR) to a remote SMTP client.
* The command \"postfix tls deploy-server-cert\" did not handle a missing optional argument. This bug was introduced in Postfix 3.1.
* Sun May 17 2020 Michael Ströder - Update to 3.5.2:
* A TLS error for a database client caused a false \'lost connection\' error for an SMTP over TLS session in the same Postfix process. This bug was introduced with Postfix 2.2.
* The same bug existed in the tlsproxy(8) daemon, where a TLS error for one TLS session could cause a false \'lost connection\' error for a concurrent TLS session in the same process. This bug was introduced with Postfix 2.8.
* The Postfix build now disables DANE support on Linux systems with libc-musl such as Alpine, because libc-musl provides no indication whether DNS responses are authentic. This broke DANE support without a clear explanation.
* Due to implementation changes in the ICU library, some Postfix daemons reported file access errrors (U_FILE_ACCESS_ERROR) after chroot(). This was fixed by initializing the ICU library before making the chroot() call.
* Minor code changes to silence a compiler that special-cases string literals.
* Segfault (null pointer) in the tlsproxy(8) client role when the server role was disabled. This typically happened on systems that do not receive mail, after configuring connection reuse for outbound SMTP over TLS.
* The date portion of the maillog_file_rotate_suffix default value used the minute (%M) instead of the month (%m).
* Mon May 11 2020 Arjen de Korte - boo#1106004 fix incorrect locations for files in postfix-files
* Sun Apr 19 2020 Michael Ströder - Dropped deprecated-RES_INSECURE1.patch to make DNSSEC-secured lookups and DANE mail transport work again- Update to 3.5.1:
* Support for the haproxy v2 protocol. The Postfix implementation supports TCP over IPv4 and IPv6, as well as non-proxied connections; the latter are typically used for heartbeat tests.
* Support to force-expire email messages. This introduces new postsuper(1) command-line options to request expiration, and additional information in mailq(1) or postqueue(1) output.
* The Postfix SMTP and LMTP client support a list of nexthop destinations separated by comma or whitespace. These destinations will be tried in the specified order.
* Incompatible changes:
* Logging: Postfix daemon processes now log the from= and to= addresses in external (quoted) form in non-debug logging (info, warning, etc.). This means that when an address localpart contains spaces or other special characters, the localpart will be quoted, for example: from=<\"name with spaces\"AATTexample.com> Specify \"info_log_address_format = internal\" for backwards compatibility.
* Postfix now normalizes IP addresses received with XCLIENT, XFORWARD, or with the HaProxy protocol, for consistency with direct connections to Postfix. This may change the appearance of logging, and the way that check_client_access will match subnets of an IPv6 address.
* Fri Mar 13 2020 Michael Ströder - Update to 3.4.10:
* Bug (introduced: Postfix 2.3): Postfix Milter client state was not properly reset after one Milter in a multi-Milter configuration failed during MAIL FROM, resulting in a Postfix Milter client panic during the next MAIL FROM command in the same SMTP session.
* Fri Feb 07 2020 Peter Varkoly - bsc#1162891 server:mail/postfix: cond_slp bug on TW after moving /etc/services to /usr/etc/services
* Wed Feb 05 2020 Peter Varkoly - bsc#1160413 postfix fails with -fno-common
* Mon Feb 03 2020 Michael Ströder - Update to 3.4.9:
* Bug (introduced: Postfix 3.1): smtp_dns_resolver_options were broken while adding support for negative DNS response caching in postscreen. Postfix was inadvertently changed to call res_query() instead of res_search().
* Bug (introduced: Postfix 2.5): Postfix ignored the CONNECT macro overrides from a Milter application. Postfix now evaluates the Milter macros for an SMTP CONNECT event after the Postfix-to-Milter connection is negotiated.
* Bug (introduced: Postfix 3.0): sanitize (remote) server responses before storing them in the verify database, to avoid Postfix warnings about malformed UTF8. Found during code maintenance.
* Wed Nov 27 2019 Michael Ströder - Update to 3.4.8:
* Fix for an Exim interoperability problem when postscreen after-220 checks are enabled. Bug introduced in Postfix 3.4: the code that detected \"PIPELINING after BDAT\" looked at the wrong variable. The warning now says \"BDAT without valid RCPT\", and the error is no longer treated as a command PIPELINING error, thus allowing mail to be delivered. Meanwhile, Exim has been fixed to stop sending BDAT commands when postscreen rejects all RCPT commands.
* Usability bug, introduced in Postfix 3.4: the parser for key/certificate chain files rejected inputs that contain an EC PARAMETERS object. While this is technically correct (the documentation says what types are allowed) this is surprising behavior because the legacy cert/key parameters will accept such inputs. For now, the parser skips object types that it does not know about for usability, and logs a warning because ignoring inputs is not kosher.
* Bug introduced in Postfix 2.8: don\'t gratuitously enable all after-220 tests when only one such test is enabled. This made selective tests impossible with \'good\' clients. This will be fixed in older Postfix versions at some later time.
* Tue Sep 24 2019 Martin Liška - Backport deprecated-RES_INSECURE1.patch in order to fix boo#1149705.
* Sun Sep 22 2019 Michael Ströder - Update to 3.4.7:
* Robustness: the tlsproxy(8) daemon could go into a loop, logging a flood of error messages. Problem reported by Andreas Schulze after enabling SMTP/TLS connection reuse.
* Workaround: OpenSSL changed an SSL_Shutdown() non-error result value into an error result value, causing logfile noise.
* Configuration: the new \'TLS fast shutdown\' parameter name was implemented incorrectly. The documentation said \"tls_fast_shutdown_enable\", but the code said \"tls_fast_shutdown\". This was fixed by changing the code, because no-one is expected to override the default.
* Performance: workaround for poor TCP loopback performance on LINUX, where getsockopt(..., TCP_MAXSEG, ...) reports a bogus TCP maximal segment size that is 1/2 to 1/3 of the real MSS. To avoid client-side Nagle delays or server-side delayed ACKs caused by multiple smaller-than-MSS writes, Postfix chooses a VSTREAM buffer size that is a small multiple of the reported bogus MSS. This workaround increases the multiplier from 2x to 4x.
* Robustness: the Postfix Dovecot client could segfault (null pointer read) or cause an SMTP server assertion to fail when talking to a fake Dovecot server. The Postfix Dovecot client now logs a proper error instead.
* Thu Sep 19 2019 Peter Varkoly - bsc#1120757 L3: File Permissions->Paranoid can cause a system hang Break loop if postfix has no permission in spool directory. - add postfix-avoid-infinit-loop-if-no-permission.patch
* Fri Aug 09 2019 chrisAATTcomputersalat.de- fix for boo#1144946 mydestination - missing default localhost
* update config.postfix
* Fri Jul 26 2019 Peter Varkoly - bsc#1142881 - mkpostfixcert from Postfix still uses md
* Thu Jul 25 2019 matthias.gerstnerAATTsuse.com- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html
* Sun Jul 21 2019 chrisAATTcomputersalat.de- update example POSTFIX_BASIC_SPAM_PREVENTION: permit_mynetworks for
* POSTFIX_SMTPD_HELO_RESTRICTIONS
* POSTFIX_SMTPD_RECIPIENT_RESTRICTIONS- fix for: Can\'t connect to local MySQL server through socket \'/run/mysql/mysql.sock\'
* update config.postfix
* update update_chroot.systemd
* Wed Jul 03 2019 Michael Ströder - Update to 3.4.6:
* Workaround for implementations that hang Postfix while shutting down a TLS session, until Postfix times out. With \"tls_fast_shutdown_enable = yes\" (the default), Postfix no longer waits for the TLS peer to respond to a TLS \'close\' request. This is recommended with TLSv1.0 and later.
* Fixed a too-strict censoring filter that broke multiline Milter responses for header/body events. Problem report by Andreas Thienemann.
* The code to reset Postfix SMTP server command counts was not called after a HaProxy handshake failure, causing stale numbers to be reported. Problem report by Joseph Ward.
* postconf(5) documentation: tlsext_padding is not a tls_ssl_options feature.
* smtp(8) documentation: updated the BUGS section text about Postfix support to reuse open TLS connections.
* Portability: added \"#undef sun\" to util/unix_dgram_connect.c.
* Wed Jun 26 2019 Peter Varkoly - Ensure that postfix is member of all groups as before.
* Wed Jun 12 2019 Dominique Leuenberger - BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to shortcut the build queues by allowing usage of systemd-mini
* Thu Jun 06 2019 Tomáš Chvátal - Drop the omc config fate#301838:
* it is obsolete since SLE11
* Wed May 08 2019 Peter Varkoly - bsc#1104543 config.postfix does not start tlsmgr in master.cf when using POSTFIX_SMTP_TLS_CLIENT=\"must\". Applyed the proposed patch.
* Sun Mar 31 2019 Michael Ströder - Update to 3.4.5: Bugfix (introduced: Postfix 3.0): LMTP connections over UNIX-domain sockets were cached but not reused, due to a cache lookup key mismatch. Therefore, idle cached connections could exhaust LMTP server resources, resulting in two-second pauses between email deliveries. This problem was investigated by Juliana Rodrigueiro. File: smtp/smtp_connect.c.
* Mon Mar 18 2019 Peter Varkoly - Update to 3.4.4 o Incompatible changes - The Postfix SMTP server announces CHUNKING (BDAT command) by default. In the unlikely case that this breaks some important remote SMTP client, disable the feature as follows: /etc/postfix/main.cf: [#] The logging alternative: smtpd_discard_ehlo_keywords = chunking [#] The non-logging alternative: smtpd_discard_ehlo_keywords = chunking, silent_discard - This introduces a new master.cf service \'postlog\' with type \'unix-dgram\' that is used by the new postlogd(8) daemon. Before backing out to an older Postfix version, edit the master.cf file and remove the postlog entry. - Postfix 3.4 drops support for OpenSSL 1.0.1 - To avoid performance loss under load, the tlsproxy(8) daemon now requires a zero process limit in master.cf (this setting is provided with the default master.cf file). By default, a tlsproxy(8) process will retire after several hours. - To set the tlsproxy process limit to zero: postconf -F tlsproxy/unix/process_limit=0 postfix reload o Major changes - Postfix SMTP server support for RFC 3030 CHUNKING (the BDAT command) without BINARYMIME, in both smtpd(8) and postscreen(8). This has no effect on Milters, smtpd_mumble_restrictions, and smtpd_proxy_filter. See BDAT_README for more. - Support for logging to file or stdout, instead of using syslog. - Logging to file solves a usability problem for MacOS, and eliminates multiple problems with systemd-based systems. - Logging to stdout is useful when Postfix runs in a container, as it eliminates a syslogd dependency. - Better handling of undocumented(!) Linux behavior whether or not signals are delivered to a PID=1 process. - Support for (key, list of filenames) in map source text. Currently, this feature is used only by tls_server_sni_maps. - Automatic retirement: dnsblog(8) and tlsproxy(8) process will now voluntarily retire after after max_idle
*max_use, or some sane limit if either limit is disabled. Without this, a process could stay busy for days or more. - Postfix SMTP client support for multiple deliveries per TLS-encrypted connection. This is primarily to improve mail delivery performance for destinations that throttle clients when they don\'t combine deliveries. This feature is enabled with \"smtp_tls_connection_reuse=yes\" in main.cf, or with \"tls_connection_reuse=yes\" in smtp_tls_policy_maps. It supports all Postfix TLS security levels including dane and dane-only. - SNI support in the Postfix SMTP server, the Postfix SMTP client, and in the tlsproxy(8) daemon (both server and client roles). See the postconf(5) documentation for the new tls_server_sni_maps and smtp_tls_servername parameters. - Support for files that contain multiple (key, certificate, trust chain) instances. This was required to implement server-side SNI table lookups, but it also eliminates the need for separate cert/key files for RSA, DSA, Elliptic Curve, and so on. - Support for smtpd_reject_footer_maps (as well as the postscreen variant postscreen_reject_footer_maps) for more informative reject messages. This is indexed with the Postfix SMTP server response text, and overrides the footer specified with smtpd_reject_footer. One will want to use a pcre: or regexp: map with this. o Bugfixes - Andreas Schulze discovered that reject_multi_recipient_bounce was producing false rejects with BDAT commands. This problem already existed with Postfix 2.2 smtpd_end_of_data_restrictons. Postfix 3.4.4 fixes both.
* Tue Mar 05 2019 Jiri Slaby - postfix-linux45.patch: support also newer kernels -- pretend we are still at kernel 3. Note that there are no conditionals for LINUX3 or LINUX4. And LINUX5 was generated, but not tested in the code which caused build failures.
* Mon Mar 04 2019 Marcus Rueckert - skip set -x and fix version update changes entry
* Sat Mar 02 2019 Michael Ströder - Update to 3.3.3
* When the master daemon runs with PID=1 (init mode), it will now reap child processes from non-Postfix code running in the same container, instead of terminating with a panic.
* Bugfix (introduced: postfix-2.11): with posttls-finger, connections to unix-domain servers always resulted in \"Failed to establish session\" even after a connection was established. Jaroslav Skarva. File: posttls-finger/posttls-finger.c.
* Bugfix (introduced: Postfix 3.0): with smtputf8_enable=yes, table lookups could casefold the search string when searching a lookup table that does not use fixed-string keys (regexp, pcre, tcp, etc.). Historically, Postfix would not case-fold the search string with such tables. File: util/dict_utf8.c.
* Fri Mar 01 2019 Reinhard Max - PostrgeSQL\'s pg_config is meant for linking server extensions, use libpq\'s pkg-config instead, if available. This is needed to fix build with PostgreSQL 11.
* Thu Feb 07 2019 chrisAATTcomputersalat.de- rework config.postfix
* disable commenting of smtpd_sasl_path/smtpd_sasl_type no need to comment, cause it is set to default anyway and \'uncommenting\' would place it at end of file then which is not wanted
* Sat Jan 26 2019 chrisAATTcomputersalat.de- rework postfix-main.cf.patch
* disable virtual_alias_domains cause (default: $virtual_alias_maps)- rework config.postfix
* disable PCONF of virtual_alias_domains virtual_alias_maps will be set anyway to the correct value
* extend virtual_alias_maps with - mysql_virtual_alias_domain_maps.cf - mysql_virtual_alias_domain_catchall_maps.cf- rework postfix-mysql, added
* mysql_virtual_alias_domain_maps.cf
* mysql_virtual_alias_domain_catchall_maps.cf needed for reject_unverified_recipient
* Thu Dec 13 2018 malte.krausAATTsuse.com- binary hardening: link with full RELRO
* Sun Nov 25 2018 Michael Ströder - Update to 3.3.2
* Support for OpenSSL 1.1.1 and TLSv1.3.
* Bugfixes: - smtpd_discard_ehlo_keywords could not disable \"SMTPUTF8\", because some lookup table was using \"EHLO_MASK_SMTPUTF8\" instead. - minor memory leak in DANE support when minting issuer certs. - The Postfix build did not abort if the m4 command was not installed, resulting in a broken postconf command.
* Sat Nov 24 2018 chrisAATTcomputersalat.de- add POSTFIX_RELAY_DOMAINS
* more flexibility to add to relay_domains without breaking config.postfix
* rework restriction examples in sysconf.postfix based on postfix-buch.com (2. edtion by Hildebrandt, Koetter)- disable weak cipher: RC4 after check with https://ssl-tools.net/mailservers
* Mon Oct 22 2018 chrisAATTcomputersalat.de- update config.postfix
* don\'t reject mail from authenticated users even if reject_unknown_client_hostname would match, add permit_sasl_authenticated to all restrictions requires smtpd_delay_reject = yes- update postfix-main.cf.patch
* recover removed setting smtpd_sasl_path and smtpd_sasl_type, set to default value config.postfix will not \'enable\' (remove #) var, but place modified (enabled) var at end of file, far away from place where it should be- rebase patches
* fix-postfix-script.patch
* postfix-vda-v14-3.0.3.patch
* postfix-linux45.patch
* postfix-master.cf.patch
* pointer_to_literals.patch
* postfix-no-md5.patch
* Thu Oct 04 2018 varkolyAATTsuse.com- bsc#1092939 - Postfixes postconf gives a lot of LDAP related warnings o add m4 as buildrequires, as proposed.
* Mon Aug 27 2018 tchvatalAATTsuse.com- Add zlib-devel as buildrequires, previously included from openssl-devel
* Fri May 25 2018 varkolyAATTsuse.com- bsc#1087471 Unreleased Postfix update breaks SUSE Manager o Removing setting smtpd_sasl_path and smtpd_sasl_type to empty
* Mon May 21 2018 michaelAATTstroeder.com- Update to 3.3.1
* Postfix did not support running as a PID=1 process, which complicated Postfix deployment in containers. The \"postfix start-fg\" command will now run the Postfix master daemon as a PID=1 process if possible. Thanks for inputs from Andreas Schulze, Eray Aslan, and Viktor Dukhovni.
* Segfault in the postconf(1) command after it could not open a Postfix database configuration file due to a file permission error (dereferencing a null pointer). Reported by Andreas Hasenack, fixed by Viktor Dukhovni.
* The luser_relay feature became a black hole, when the luser_relay parameter was set to a non-existent local address (i.e. mail disappeared silently). Reported by J?rgen Thomsen.
* Missing error propagation in the tlsproxy(8) daemon could result in a segfault after TLS handshake error (dereferencing a 0xffff...ffff pointer). This daemon handles the TLS protocol when a non-whitelisted client sends a STARTTLS command to postscreen(8).
* Wed May 09 2018 lnusselAATTsuse.de- remove pre-requirements on sysvinit(network) and sysvinit(syslog). There seems to be no good reason for that other than blowing up the dependencies (bsc#1092408).
* Mon Apr 09 2018 adam.majerAATTsuse.de- bsc#1071807 postfix-SuSE/config.postfix: only reload postfix if the actual service is running. This prevents spurious and irrelevant error messages in system logs.
* Thu Mar 22 2018 varkolyAATTsuse.com- bsc#1082514 autoyast: postfix gets not set myhostname properly - set to localhost
* Mon Mar 12 2018 ilyaAATTilya.pp.ua- Refresh spec-file via spec-cleaner and manual optinizations.
* Add %license macro.
* Set license to IPL-1.0 OR EPL-2.0.- Update to 3.3.0
* http://cdn.postfix.johnriley.me/mirrors/postfix-release/official/postfix-3.3.0.RELEASE_NOTES
* Dual license: in addition to the historical IBM Public License 1.0, Postfix is now also distributed with the more recent Eclipse Public License 2.0. Recipients can choose to take the software under the license of their choice. Those who are more comfortable with the IPL can continue with that license.
* The postconf command now warns about unknown parameter names in a Postfix database configuration file. As with other unknown parameter names, these warnings can help to find typos early.
* Container support: Postfix 3.3 will run in the foreground with \"postfix start-fg\". This requires that Postfix multi-instance support is disabled (the default). To collect Postfix syslog information on the container\'s host, mount the host\'s /dev/log socket into the container, for example with \"docker run -v /dev/log:/dev/log ...other options...\", and specify a distinct Postfix syslog_name setting in the container (for example with \"postconf syslog_name=the-name-here\").
* Milter support: applications can now send RET and ENVID parameters in SMFIR_CHGFROM (change envelope sender) requests.
* Postfix-generated From: headers with \'full name\' information are now formatted as \"From: name

\" by default. Specify \"header_from_format = obsolete\" to get the earlier form \"From: address (name)\".
* Interoperability: when Postfix IPv6 and IPv4 support are both enabled, the Postfix SMTP client will now relax MX preferences and attempt to schedule similar numbers of IPv4 and IPv6 addresses. This works around mail delivery problems when a destination announces lots of primary MX addresses on IPv6, but is reachable only over IPv4 (or vice versa). The new behavior is controlled with the smtp_balance_mx_inet_protocols parameter.
* Compatibility safety net: with compatibility_level < 1, the Postfix SMTP server now warns for mail that would be blocked by the Postfix 2.10 smtpd_relay_restrictions feature, without blocking that mail. There still is a steady trickle of sites that upgrade from an earlier Postfix version.
* Tue Feb 13 2018 varkolyAATTsuse.com- bsc#1065411 Package postfix should require package system-user-nobody- bsc#1080772 postfix smtpd throttle getting \"hello\" if no sasl auth was configured
* Thu Dec 07 2017 dimstarAATTopensuse.org- Fix usage of fillup_only:-y is not a valid option to this macro.
* Thu Nov 23 2017 rbrownAATTsuse.com- Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)
* Wed Nov 08 2017 kukukAATTsuse.de- Don\'t mark postfix.service as config file, this is no config file.- Some of the Requires(pre) are needed for post-install and at runtime, fix the requires.
* Mon Oct 30 2017 michaelAATTstroeder.com- update to 3.2.4
* DANE interoperability. Postfix builds with OpenSSL 1.0.0 or 1.0.1 failed to send email to some sites with \"TLSA 2 X X\" DNS records associated with an intermediate CA certificate. Problem report and initial fix by Erwan Legrand.
* Missing dynamicmaps support in the Postfix sendmail command. This broke authorized_submit_users settings that use a dynamically-loaded map type. Problem reported by Ulrich Zehl.
* Fri Oct 20 2017 varkolyAATTsuse.com- bnc#1059512 L3: Postfix Problem The applied changes breaks existing postfix configurations because daemon_directory was not adapted to the new value.
* Sun Oct 15 2017 chrisAATTcomputersalat.de- fix build for SLE
* nothing provides libnsl-devel
* add bcond_with libnsl
* Wed Oct 04 2017 varkolyAATTsuse.com- bnc#1059512 L3: Postfix Problem To manage multiple Postfix instances on a single host requires that daemon_directory and shlib_directory is different to avoid use of the shared directories also as per-instance directories. For this reason daemon_directory was set to /usr/lib/postfix/bin/. shlib_directory stands /usr/lib/postfix/.
* Thu Sep 28 2017 varkolyAATTsuse.com- bnc#1016491 postfix raported to log \"warning: group or other writable:\" on each symlink in config.
* Add fix-postfix-script.patch
* Mon Sep 25 2017 michaelAATTstroeder.com- update to 3.2.3
* Extension propagation was broken with \"recipient_delimiter = .\". This change reverts a change that was trying to be too clever.
* The postqueue command would abort with a panic message after it experienced an output write error while listing the mail queue. This change restores a write error check that was lost with the Postfix 3.2 rewrite of the vbuf_print formatter.
* Restored sanity checks for dynamically-specified width and precision in format strings (%
*, %.
*, and %
*.
*). These checks were lost with the Postfix 3.2 rewrite of the vbuf_print formatter.
* Thu Aug 17 2017 kukukAATTsuse.de- Add libnsl-devel build requires for glibc obsoleting libnsl
* Thu Jul 27 2017 varkolyAATTsuse.com- bnc#1045264 L3: postmap problem
* Applying proposed patch of leen.meyerAATTziggo.nl in bnc#771811
* Fri Jun 16 2017 michaelAATTstroeder.com- update to 3.2.2
* Security: Berkeley DB versions 2 and later try to read settings from a file DB_CONFIG in the current directory. This undocumented feature may introduce undisclosed vulnerabilities resulting in privilege escalation with Postfix set-gid programs (postdrop, postqueue) before they chdir to the Postfix queue directory, and with the postmap and postalias commands depending on whether the user\'s current directory is writable by other users. This fix does not change Postfix behavior for Berkeley DB versions < 3, but it does reduce postmap and postalias \'create\' performance with Berkeley DB versions 3.0 .. 4.6.
* The SMTP server receive_override_options were not restored at the end of an SMTP session, after the options were modified by an smtpd_milter_maps setting of \"DISABLE\". Milter support remained disabled for the life time of the smtpd process.
* After the Postfix 3.2 address/domain table lookup overhaul, the check_sender_access and check_recipient_access features ignored a non-default parent_domain_matches_subdomains setting.
* Wed Apr 19 2017 chrisAATTcomputersalat.de- revert changes of postfix-main.cf.patch from rev=261
* config.postfix will not \'enable\' (remove #) var, but place modified (enabled) var at end of file, far away from place where it should be
* keep vars enabled but empty
* Thu Apr 13 2017 wernerAATTsuse.de- Some cleanups
* Fix SUSE postfix-files to avoid chown errors (anyway this file seems to be obsolete)
* Avoid installing shared libraries twice
* Refresh patch postfix-linux45.patch
* Sat Apr 08 2017 chrisAATTcomputersalat.de- update postfix-master.cf.patch
* recover lost (with 3.2.0 update) submission, smtps sections
* merge with upstream update- update config.postfix
* update master.cf generation for submission- rebase patches against 3.2.0
* pointer_to_literals.patch
* postfix-no-md5.patch
* postfix-ssl-release-buffers.patch
* postfix-vda-v14-3.0.3.patch
* Mon Mar 20 2017 kukukAATTsuse.de- Require system group mail- Use mail group name instead of GID
* Mon Mar 06 2017 mrueckertAATTsuse.de- update to 3.2.0 - [Feature 20170128] Postfix 3.2 fixes the handling of address extensions with email addresses that contain spaces. For example, the virtual_alias_maps, canonical_maps, and smtp_generic_maps features now correctly propagate an address extension from \"aa bb+ext\"AATTexample.com to \"cc dd+ext\"AATTother.example, instead of producing broken output. - [Feature 20161008] \"PASS\" and \"STRIP\" actions in header/body_checks. \"STRIP\" is similar to \"IGNORE\" but also logs the action, and \"PASS\" disables header, body, and Milter inspection for the remainder of the message content. Contributed by Hobbit. - [Feature 20160330] The collate.pl script by Viktor Dukhovni for grouping Postfix logfile records into \"sessions\" based on queue ID and process ID information. It\'s in the auxiliary/collate directory of the Postfix source tree. - [Feature 20160527] Postfix 3.2 cidr tables support if/endif and negation (by prepending ! to a pattern), just like regexp and pcre tables. The primarily purpose is to improve readability of complex tables. See the cidr_table(5) manpage for syntax details. - [Incompat 20160925] In the Postfix MySQL database client, the default option_group value has changed to \"client\", to enable reading of \"client\" option group settings in the MySQL options file. This fixes a \"not found\" problem with Postfix queries that contain UTF8-encoded non-ASCII text. Specify an empty option_group value (option_group =) to get backwards-compatible behavior. - [Feature 20161217] Stored-procedure support for MySQL databases. Contributed by John Fawcett. See mysql_table(5) for instructions. - [Feature 20170128] The postmap command, and the inline: and texthash: maps now support spaces in left-hand field of the lookup table \"source text\". Use double quotes (\") around a left-hand field that contains spaces, and use backslash (\\) to protect embedded quotes in a left-hand field. There is no change in the processing of the right-hand field. - [Feature 20160611] The Postfix SMTP server local IP address and port are available in the policy delegation protocol (attribute names: server_address, server_port), in the Milter protocol (macro names: {daemon_addr}, {daemon_port}), and in the XCLIENT protocol (attribute names: DESTADDR, DESTPORT). - [Feature 20161024] smtpd_milter_maps support for per-client Milter configuration that overrides smtpd_milters, and that has the same syntax. A lookup result of \"DISABLE\" turns off Milter support. See MILTER_README.html for details. - [Feature 20160611] The Postfix SMTP server local IP address and port are available in the policy delegation protocol (attribute names: server_address, server_port), in the Milter protocol (macro names: {daemon_addr}, {daemon_port}), and in the XCLIENT protocol (attribute names: DESTADDR, DESTPORT). - [Incompat 20170129] The postqueue command no longer forces all message arrival times to be reported in UTC. To get the old behavior, set TZ=UTC in main.cf:import_environment (this override is not recommended, as it affects all Postfix utities and daemons). - [Incompat 20161227] For safety reasons, the sendmail -C option must specify an authorized directory: the default configuration directory, a directory that is listed in the default main.cf file with alternate_config_directories or multi_instance_directories, or the command must be invoked with root privileges (UID 0 and EUID 0). This mitigates a recurring problem with the PHP mail() function. - [Feature 20160625] The Postfix SMTP server now passes remote client and local server network address and port information to the Cyrus SASL library. Build with ``make makefiles \"CCARGS=$CCARGS -DNO_IP_CYRUS_SASL_AUTH\"\'\' for backwards compatibility. - [Feature 20161103] Postfix 3.2 disables the \'transitional\' compatibility between the IDNA2003 and IDNA2008 standards for internationalized domain names (domain names beyond the limits of US-ASCII). This change makes Postfix behavior consistent with contemporary web browsers. It affects the handling of some corner cases such as German sz and Greek zeta. See http://unicode.org/cldr/utility/idna.jsp for more examples. Specify \"enable_idna2003_compatibility = yes\" to restore historical behavior (but keep in mind that the rest of the world may not make that same choice). - [Feature 20160828] Fixes for deprecated OpenSSL 1.1.0 API features, so that Postfix will build without depending on backwards-compatibility support. [Incompat 20161204] Postfix 3.2 removes tentative features that were implemented before the DANE spec was finalized: - Support for certificate usage PKIX-EE(1), - The ability to disable digest agility (Postfix now behaves as if \"tls_dane_digest_agility = on\"), and - The ability to disable support for \"TLSA 2 [01] [12]\" records that specify the digest of a trust anchor (Postfix now behaves as if \"tls_dane_trust_anchor_digest_enable = yes). - [Feature 20161217] Postfix 3.2 enables elliptic curve negotiation with OpenSSL >= 1.0.2. This changes the default smtpd_tls_eecdh_grade setting to \"auto\", and introduces a new parameter tls_eecdh_auto_curves with the names of curves that may be negotiated. The default tls_eecdh_auto_curves setting is determined at compile time, and depends on the Postfix and OpenSSL versions. At runtime, Postfix will skip curve names that aren\'t supported by the OpenSSL library. - [Feature 20160611] The Postfix SMTP server local IP address and port are available in the policy delegation protocol (attribute names: server_address, server_port), in the Milter protocol (macro names: {daemon_addr}, {daemon_port}), and in the XCLIENT protocol (attribute names: DESTADDR, DESTPORT).- refresh postfix-master.cf.patch
* Mon Mar 06 2017 wrAATTrosenauer.org- make sure that system users can be created in %pre
* Sat Feb 18 2017 kukukAATTsuse.com- Fix requires: - shadow is needed for postfix-mysql pre-install section - insserv is not needed if systemd is used
* Sat Jan 21 2017 chrisAATTcomputersalat.de- update postfix-mysql
* update mysql_
*.cf files
* update postfix-mysql.sql (INNODB, utf8)- update postfix-main.cf.patch
* uncomment smtpd_sasl_path, smtpd_sasl_type can be changed via POSTFIX_SMTP_AUTH_SERVICE=(cyrus,dovecot)
* add option for smtp_tls_policy_maps (commented)- update postfix-master.cf.patch
* fix indentation of submission, smtps options for correct enabling via config.postfix- update config.postfix
* fix sync of CA certificates
* fix master.cf generation for submission, smtps- rebase postfix-vda-v14-3.0.3.patch
* Wed Jan 11 2017 varkolyAATTsuse.com- FATE#322322 Update postfix to version 3.X Merging changes with SLES12-SP2 Removeved patches: add_missed_library.patch bnc#947707.diff dynamic_maps.patch postfix-db6.diff postfix-opensslconfig.patch bnc#947519.diff dynamic_maps_pie.patch postfix-post-install.patch These are included in the new version of postfix- Remove references to SuSEconfig.postfix from sysconfig docs. (bsc#871575)- bnc#947519 SuSEconfig.postfix should enforce umask 022- bnc#947707 mail generated by Amavis being prevented from being re-adressed by /etc/postfix/virtual- bnc#972346 /usr/sbin/SuSEconfig.postfix is wrong- postfix-linux45.patch: handle Linux 4.x and Linux 5.x (used by aarch64) (bsc#940289)
* Tue Jan 03 2017 varkolyAATTsuse.com- update to 3.1.4
* The postscreen daemon did not merge the client test status information for concurrent sessions from the same IP address.
* The Postfix SMTP server falsely rejected a sender address when validating a sender address with \"smtpd_reject_unlisted_recipient = yes\" or with \"reject_unlisted_sender\". Cause: the address validation code did not query sender_canonical_maps.
* The virtual delivery agent did not detect failure to skip to the end of a mailbox file, so that mail would be delivered to the beginning of the file. This could happen when a mailbox file was already larger than the virtual mailbox size limit.
* The postsuper logged an incorrect rename operation count after creating a missing directory.
* The Postfix SMTP server falsely rejected mail when a sender-dependent \"error\" transport was configured. Cause: the SMTP server address validation code was not updated when the sender_dependent_default_transport_maps feature was introduced.
* The Postfix SMTP server falsely rejected an SMTPUTF8 sender address, when \"smtpd_delay_reject = no\".
* The \"postfix tls deploy-server-cert\" command used the wrong certificate and key file. This was caused by a cut-and-paste error in the postfix-tls-script file.
* Sat Nov 26 2016 chrisAATTcomputersalat.de- improve config.postfix
* improve SASL stuff
* add POSTFIX_SMTP_AUTH_SERVICE=(cyrus|dovecot)
* Mon Nov 14 2016 chrisAATTcomputersalat.de- improve config.postfix
* improve with MySQL stuff
* Mon Nov 07 2016 chrisAATTcomputersalat.de- update vda patch to latest available
* remove postfix-vda-v13-3.10.0.patch
* add postfix-vda-v14-3.0.3.patch- rebase patches (and to be p0)
* pointer_to_literals.patch
* postfix-main.cf.patch
* postfix-master.cf.patch
* postfix-no-md5.patch
* postfix-ssl-release-buffers.patch- add /etc/postfix/ssl as default DIR for SSL stuff
* cacerts -> ../../ssl/certs/
* certs/- revert POSTFIX_SSL_PATH from \'/etc/ssl\' to \'/etc/postfix/ssl\'- improve config.postfix
* revert smtpd_tls_CApath to POSTFIX_SSL_PATH/cacerts which is a symlink to /etc/ssl/certs Without reverting, \'gen_CA\' would create files which would then be on the previous defined \'sslpath(/etc/ssl)/certs\' (smtpd_tls_CApath) Cert reqs would be placed in \'sslpath(/etc/ssl)/certs/postfixreq.pem\' which is not a good idea.
* mkchroot: sync \'/etc/postfix/ssl\' to chroot
* improve PCONF for smtp{,d}_tls_{cert,key}_file, adding/removing from main.cf, show warning if enabled and file is missing
* Sun Oct 09 2016 michaelAATTstroeder.com- update to 3.1.3:
* The Postfix SMTP server did not reset a previous session\'s failed/total command counts before rejecting a client that exceeds request or concurrency rates. This resulted in incorrect failed/total command counts being logged at the end of the rejected session.
* The unionmap multi-table interface did not propagate table lookup errors, resulting in false \"user unknown\" responses.
* The documentation was updated with a workaround for false \"not found\" errors with MySQL map queries that contain UTF8-encoded text. The workaround is to specify \"option_group = client\" in Postfix MySQL configuration files. This will be the default setting with Postfix 3.2 and later.
* Sun Sep 04 2016 michaelAATTstroeder.com- update to 3.1.2:
* Changes to make Postfix build with OpenSSL 1.1.0.
* The makedefs script ignored readme_directory=pathname overrides. Fix by Todd C. Olson.
* The tls_session_ticket_cipher documentation says that the default cipher for TLS session tickets is aes-256-cbc, but the implemented default was aes-128-cbc. Note that TLS session ticket keys are rotated after 1/2 hour, to limit the impact of attacks on session ticket keys.
* Thu Jun 02 2016 schwabAATTsuse.de- postfix-post-install.patch: remove empty patch
* Sun May 29 2016 chrisAATTcomputersalat.de- fix Changelog cause of Factory decline
* Tue May 24 2016 varkolyAATTsuse.com- Fix typo in config.postfix
* Tue May 24 2016 varkolyAATTsuse.com- bnc#981097 config.postfix creates broken main.cf for tls client configuration- bnc#981099 /etc/sysconfig/postfix: POSTFIX_SMTP_TLS_CLIENT incomplete- update to 3.1.1:- The new address_verify_pending_request_limit parameter introduces a safety limit for the number of address verification probes in the active queue. The default limit is 1/4 of the active queue maximum size. The queue manager enforces the limit by tempfailing probe messages that exceed the limit. This design avoids dependencies on global counters that get out of sync after a process or system crash.- Machine-readable, JSON-formatted queue listing with \"postqueue -j\" (no \"mailq\" equivalent).- The milter_macro_defaults feature provides an optional list of macro name=value pairs. These specify default values for Milter macros when no value is available from the SMTP session context.- Support to enforce a destination-independent delay between email deliveries. The following example inserts 20 seconds of delay between all deliveries with the SMTP transport, limiting the delivery rate to at most three messages per minute. smtp_transport_rate_delay = 20s- Historically, the default setting \"postscreen_dnsbl_ttl = 1h\" assumes that a \"not found\" result from a DNSBL server will be valid for one hour. This may have been adequate five years ago when postscreen was first implemented, but nowadays, that one hour can result in missed opportunities to block new spambots. To address this, postscreen now respects the TTL of DNSBL \"not found\" replies, as well as the TTL of DNSWL replies (both \"found\" and \"not found\"). The TTL for a \"not found\" reply is determined according to RFC 2308 (the TTL of an SOA record in the reply). Support for DNSBL or DNSWL reply TTL values is controlled by two configuration parameters: postscreen_dnsbl_min_ttl (default: 60 seconds). postscreen_dnsbl_max_ttl (default: $postscreen_dnsbl_ttl or 1 hour) The postscreen_dnsbl_ttl parameter is now obsolete, and has become the default value for the new postscreen_dnsbl_max_ttl parameter.- New \"smtpd_client_auth_rate_limit\" feature, to enforce an optional rate limit on AUTH commands per SMTP client IP address. Similar to other smtpd_client_
*_rate_limit features, this enforces a limit on the number of requests per $anvil_rate_time_unit.- New SMTPD policy service attribute \"policy_context\", with a corresponding \"smtpd_policy_service_policy_context\" configuration parameter. Originally, this was implemented to share the same SMTPD policy service endpoint among multiple check_policy_service clients.- A new \"postfix tls\" command to quickly enable opportunistic TLS in the Postfix SMTP client or server, and to manage SMTP server keys and certificates, including certificate signing requests and TLSA DNS records for DANE.
* Tue Apr 19 2016 opensuseAATTdstoecker.de- build with working support for SMTPUTF8
* Sun Mar 20 2016 mrueckertAATTsuse.de- fix build on sle11 by pointing _libexecdir to /usr/lib all the time.
* Sun Mar 20 2016 mrueckertAATTsuse.de- some distros did not pull pkgconfig indirectly. pull it directly.
* Sun Mar 20 2016 mrueckertAATTsuse.de- fix building the dynamic maps: the old build had postgresql e.g. with missing symbols. - convert to AUXLIBS_
* instead of plain AUXLIBS which is needed for proper dynamic maps. - reordered the CCARGS and AUXLIBS
* lines to group by feature - use pkgconfig or
*_config tools where possible- picked up signed char from fedora spec file- enable lmdb support: new BR lmdb-devel, new subpackage postfix-lmdb.- don\'t delete vmail user/groups
* Wed Mar 09 2016 varkolyAATTsuse.com- update to 3.1.0- Since version 3.0 postfix supports dynamic loading of cdb:, ldap:, lmdb:, mysql:, pcre:, pgsql:, sdbm:, and sqlite: database clients. Thats why the patches dynamic_maps.patch and dynamic_maps_pie.patch could be removed.- Adapting all the patches to postfix 3.1.0- remove obsolete patches
* add_missed_library.patch
* postfix-opensslconfig.patch- update vda patch
* remove postfix-vda-v13-2.10.0.patch
* add postfix-vda-v13-3.10.0.patch- The patch postfix-db6.diff is not more neccessary- Backwards-compatibility safety net. With NEW Postfix installs, you MUST install a main.cf file with the setting \"compatibility_level = 2\". See conf/main.cf for an example. With UPGRADES of existing Postfix systems, you MUST NOT change the main.cf compatibility_level setting, nor add this setting if it does not exist. Several Postfix default settings have changed with Postfix 3.0. To avoid massive frustration with existing Postfix installations, Postfix 3.0 comes with a safety net that forces Postfix to keep running with backwards-compatible main.cf and master.cf default settings. This safety net depends on the main.cf compatibility_level setting (default: 0). Details are in COMPATIBILITY_README.- Major changes - tls
* [Feature 20160207] A new \"postfix tls\" command to quickly enable opportunistic TLS in the Postfix SMTP client or server, and to manage SMTP server keys and certificates, including certificate signing requests and TLSA DNS records for DANE.
* As of the middle of 2015, all supported Postfix releases no longer nable \"export\" grade ciphers for opportunistic TLS, and no longer use the deprecated SSLv2 and SSLv3 protocols for mandatory or opportunistic TLS.
* [Incompat 20150719] The default Diffie-Hellman non-export prime was updated from 1024 to 2048 bits, because SMTP clients are starting to reject TLS handshakes with primes smaller than 2048 bits.
* [Feature 20160103] The Postfix SMTP client by default enables DANE policies when an MX host has a (DNSSEC) secure TLSA DNS record, even if the MX DNS record was obtained with insecure lookups. The existence of a secure TLSA record implies that the host wants to talk TLS and not plaintext. For details see the smtp_tls_dane_insecure_mx_policy configuration parameter.- Major changes - default settings [Incompat 20141009] The default settings have changed for relay_domains (new: empty, old: $mydestination) and mynetworks_style (new: host, old: subnet). However the backwards-compatibility safety net will prevent these changes from taking effect, giving the system administrator the option to make an old default setting permanent in main.cf or to adopt the new default setting, before turning off backwards compatibility. See COMPATIBILITY_README for details. [Incompat 20141001] A new backwards-compatibility safety net forces Postfix to run with backwards-compatible main.cf and master.cf default settings after an upgrade to a newer but incompatible Postfix version. See COMPATIBILITY_README for details. While the backwards-compatible default settings are in effect, Postfix logs what services or what email would be affected by the incompatible change. Based on this the administrator can make some backwards-compatibility settings permanent in main.cf or master.cf, before turning off backwards compatibility.- Major changes - address verification safety [Feature 20151227] The new address_verify_pending_request_limit parameter introduces a safety limit for the number of address verification probes in the active queue. The default limit is 1/4 of the active queue maximum size. The queue manager enforces the limit by tempfailing probe messages that exceed the limit. This design avoids dependencies on global counters that get out of sync after a process or system crash. Tempfailing verify requests is not as bad as one might think. The Postfix verify cache proactively updates active addresses weeks before they expire. The address_verify_pending_request_limit affects only unknown addresses, and inactive addresses that have expired from the address verify cache (by default, after 31 days).- Major changes - json support [Feature 20151129] Machine-readable, JSON-formatted queue listing with \"postqueue -j\" (no \"mailq\" equivalent). The output is a stream of JSON objects, one per queue file. To simplify parsing, each JSON object is formatted as one text line followed by one newline character. See the postqueue(1) manpage for a detailed description of the output format.- Major changes - milter support [Feature 20150523] The milter_macro_defaults feature provides an optional list of macro name=value pairs. These specify default values for Milter macros when no value is available from the SMTP session context. For example, with \"milter_macro_defaults = auth_type=TLS\", the Postfix SMTP server will send an auth_type of \"TLS\" to a Milter, unless the remote client authenticates with SASL. This feature was originally implemented for a submission service that may authenticate clients with a TLS certificate, without having to make changes to the code that implements TLS support.- Major changes - output rate control [Feature 20150710] Destination-independent delivery rate delay Support to enforce a destination-independent delay between email deliveries. The following example inserts 20 seconds of delay between all deliveries with the SMTP transport, limiting the delivery rate to at most three messages per minute. /etc/postfix/main.cf: smtp_transport_rate_delay = 20s For details, see the description of default_transport_rate_delay and transport_transport_rate_delay in the postconf(5) manpage.- Major changes - postscreen dnsbl [Feature 20150710] postscreen support for the TTL of DNSBL and DNSWL lookup results Historically, the default setting \"postscreen_dnsbl_ttl = 1h\" assumes that a \"not found\" result from a DNSBL server will be valid for one hour. This may have been adequate five years ago when postscreen was first implemented, but nowadays, that one hour can result in missed opportunities to block new spambots. To address this, postscreen now respects the TTL of DNSBL \"not found\" replies, as well as the TTL of DNSWL replies (both \"found\" and \"not found\"). The TTL for a \"not found\" reply is determined according to RFC 2308 (the TTL of an SOA record in the reply). Support for DNSBL or DNSWL reply TTL values is controlled by two configuration parameters: postscreen_dnsbl_min_ttl (default: 60 seconds). This parameter specifies a minimum for the amount of time that a DNSBL or DNSWL result will be cached in the postscreen_cache_map. This prevents an excessive number of postscreen cache updates when a DNSBL or DNSWL server specifies a very small reply TTL. postscreen_dnsbl_max_ttl (default: $postscreen_dnsbl_ttl or 1 hour) This parameter specifies a maximum for the amount of time that a DNSBL or DNSWL result will be cached in the postscreen_cache_map. This prevents cache pollution when a DNSBL or DNSWL server specifies a very large reply TTL. The postscreen_dnsbl_ttl parameter is now obsolete, and has become the default value for the new postscreen_dnsbl_max_ttl parameter.- Major changes - sasl auth safety [Feature 20151031] New \"smtpd_client_auth_rate_limit\" feature, to enforce an optional rate limit on AUTH commands per SMTP client IP address. Similar to other smtpd_client_
*_rate_limit features, this enforces a limit on the number of requests per $anvil_rate_time_unit.- Major changes - smtpd policy [Feature 20150913] New SMTPD policy service attribute \"policy_context\", with a corresponding \"smtpd_policy_service_policy_context\" configuration parameter. Originally, this was implemented to share the same SMTPD policy service endpoint among multiple check_policy_service clients.
* Wed Dec 09 2015 varkolyAATTsuse.com- bnc#958329 postfix fails to start when openslp is not installed
* Mon Oct 12 2015 michaelAATTstroeder.com- upstream update postfix 2.11.7:
* The Postfix Milter client aborted with a panic while adding a message header, after adding a short message header with the header_checks PREPEND action. Fixed by invoking the header output function while PREPENDing a message header.
* False alarms while scanning the Postfix queue. Fixed by resetting errno before calling readdir(). This defect was introduced 19970309.
* The postmulti command produced an incorrect error message.
* The postmulti command now refuses to create a new MTA instance when the template main.cf or master.cf file are missing. This is a common problem on Debian-like systems.
* Turning on Postfix SMTP server HAProxy support broke TLS wrappermode. Fixed by temporarily using a 1-byte VSTREAM buffer to read the HAProxy connection hand-off information.
* The xtext_unquote() function did not propagate error reports from xtext_unquote_append(), causing the decoder to return partial output, instead of rejecting malformed input. The Postfix SMTP server uses this function to parse input for the ENVID and ORCPT parameters, and for XFORWARD and XCLIENT command parameters.
* Wed Aug 12 2015 jkeilAATTsuse.de- boo#934060: Remove quirky hostname logic from config.postfix
* /etc/hostname doesn\'t contain anything useful
* linux.local is no good either
* postfix will use `hostname`.localdomain as fallback
* Tue Aug 04 2015 meissnerAATTsuse.com- postfix-no-md5.patch: replace fingerprint defaults by sha1. bsc#928885
* Tue Aug 04 2015 meissnerAATTsuse.com- %verifyscript is a new section, move it out of the %ifdef so the fillups are run afterwards.
* Wed Jul 22 2015 michaelAATTstroeder.com- upstream update postfix 2.11.6: Default settings have been updated so that they no longer enable export-grade ciphers, and no longer enable the SSLv2 and SSLv3 protocols.- removed postfix-2.11.5_linux4.patch because it\'s obsolete- Bugfix (introduced: Postfix 2.11): with connection caching enabled (the default), recipients could be given to the wrong mail server. (bsc#944722)
* Mon Jun 01 2015 crrodriguezAATTopensuse.org- postfix-SuSE.tar.gz/postfix.service: None of nss-lookup.target network.target local-fs.target time-sync.target should be Wanted or Required except by the services the implement the relevant functionality i.e network.target is wanted/required by networkmanager, wicked, systemd-network. other software must be ordered After them, see systemd.special(7)
* Sun May 17 2015 mpluskalAATTsuse.com- Fix library symlink generation (boo#928662)
* Tue Apr 21 2015 mrueckertAATTsuse.de- added postfix-2.11.5_linux4.patch: Allow building on kernel 4. Patch taken from: https://groups.google.com/forum/#!topic/mailing.postfix.users/fufS22sMGWY
* Sun Apr 19 2015 mrueckertAATTsuse.de- update to postfix 2.11.5 - Bugfix (introduced: Postfix 2.6): sender_dependent_relayhost_maps ignored the relayhost setting in the case of a DUNNO lookup result. It would use the recipient domain instead. Viktor Dukhovni. Wietse took the pieces of code that enforce the precedence of a sender-dependent relayhost, the global relayhost, and the recipient domain, and put that code together in once place so that it is easier to maintain. File: trivial-rewrite/resolve.c. - Bitrot: prepare for future changes in OpenSSL API. Viktor Dukhovni. File: tls_dane.c. - Incompatibility: specifying \"make makefiles\" with \"CC=command\" will no longer override the default WARN setting.
* Mon Feb 09 2015 michaelAATTstroeder.com- upstream update postfix 2.11.4: Postfix 2.11.4 only:
* Fix a core dump when smtp_policy_maps specifies an invalid TLS level.
* Fix a missing \" in \\%s\\\", in postconf(1) fatal error messages, which violated the C language spec. Reported by Iain Hibbert. All supported releases:
* Stop excessive recursion in the cleanup server while recovering from a virtual alias expansion loop. Problem found at Two Sigma.
* Stop exponential memory allocation with virtual alias expansion loops. This came to light after fixing the previous problem.
* Sun Feb 08 2015 varkolyAATTsuse.com- correct pf_daemon_directory in spec. This must be /usr/lib/
* Thu Jan 22 2015 varkolyAATTsuse.com- bnc#914086 syntax error in config.postfix- Adapt config.postfix to be able to run on SLE11 too.
* Mon Jan 19 2015 mpluskalAATTsuse.com- Don\'t install sysvinit script when systemd is used- Make explicit PreReq dependencies conditional only for older systems- Don\'t try to set explicit attributes to symlinks- Cleanup spec file vith spec-cleaner
* Tue Jan 13 2015 varkolyAATTsuse.com- bnc#912594 config.postfix creates config based on old options
* Tue Jan 06 2015 varkolyAATTsuse.com- bnc#911806 config.postfix does not set up correct saslauthd socket directory for chroot- bnc#910265 config.postfix does not upgrade the chroot- bnc#908003 wrong access rights on /usr/sbin/postdrop causes permission denied when trying to send a mail as non root user- bnc#729154 wrong permissions for some postfix components
* Fri Nov 21 2014 tchvatalAATTsuse.com- Remove keyring and things as it is md5 based one no longer accepted by gpg 2.1
* Fri Nov 14 2014 dimstarAATTopensuse.org- No longer perform gpg validation; osc source_validator does it implicit: + Drop gpg-offline BuildRequires. + No longer execute gpg_verify.
* Mon Oct 27 2014 dmuellerAATTsuse.com- restore previously lost fix: Fri Oct 11 13:32:32 UTC 2013 - matzAATTsuse.de - Ignore errors in %pre/%post.
* Mon Oct 20 2014 michaelAATTstroeder.com- postfix 2.11.3:
* Fix for configurations that prepend message headers with Postfix access maps, policy servers or Milter applications. Postfix now hides its own Received: header from Milters and exposes prepended headers to Milters, regardless of the mechanism used to prepend a header. This fix reverts a partial solution that was released on October 13, 2014, and replaces it with a complete solution.
* Portability fix for MacOS X 10.7.x (Darwin 11.x) build procedure.- postfix 2.11.2:
* Fix for DMARC implementations based on SPF policy plus DKIM Milter. The PREPEND access/policy action added headers ABOVE Postfix\'s own Received: header, exposing Postfix\'s own Received: header to Milters (protocol violation) and hiding the PREPENDed header from Milters. PREPENDed headers are now added BELOW Postfix\'s own Received: header and remain visible to Milters.
* The Postfix SMTP server logged an incorrect client name in reject messages for check_reverse_client_hostname_access and check_reverse_client_hostname_{mx,ns}_access. They replied with the verified client name, instead of the name that was rejected.
* The qmqpd daemon crashed with null pointer bug when logging a lost connection while not in a mail transaction.