Changelog for python311-charset-normalizer-3.3.2-46.5.noarch.rpm :

* Sat Nov 25 2023 Dirk Müller - update to 3.3.2:
* Unintentional memory usage regression when using large payload that match several encoding (#376)
* Regression on some detection case showcased in the documentation (#371)
* Noise (md) probe that identify malformed arabic representation due to the presence of letters in isolated form
* Optional mypyc compilation upgraded to version 1.6.1 for Python >= 3.8
* Improved the general detection reliability based on reports from the community
* Mon Oct 02 2023 Dirk Müller - update to 3.3.0:
* Allow to execute the CLI (e.g. normalizer) through `python -m charset_normalizer.cli` or `python -m charset_normalizer`
* Support for 9 forgotten encoding that are supported by Python but unlisted in `encoding.aliases` as they have no alias
* Optional mypyc compilation upgraded to version 1.5.1 for Python >= 3.7
* Unable to properly sort CharsetMatch when both chaos/noise and coherence were close due to an unreachable condition in \\_\\_lt\\_\\_ (#350)
* Tue Jul 11 2023 Dirk Müller - update to 3.2.0:
* Typehint for function `from_path` no longer enforce `PathLike` as its first argument
* Minor improvement over the global detection reliability
* Introduce function `is_binary` that relies on main capabilities, and optimized to detect binaries
* Propagate `enable_fallback` argument throughout `from_bytes`, `from_path`, and `from_fp` that allow a deeper control over the detection (default True)
* Edge case detection failure where a file would contain \'very- long\' camel cased word (Issue #289)
* Fri Apr 21 2023 Dirk Müller - add sle15_python_module_pythons (jsc#PED-68)
* Sun Mar 26 2023 Dirk Müller - update to 3.1.0:
* Argument `should_rename_legacy` for legacy function `detect` and disregard any new arguments without errors (PR #262)
* Removed Support for Python 3.6 (PR #260)
* Optional speedup provided by mypy/c 1.0.1
* Sat Dec 03 2022 Yogalakshmi Arunachalam - Update to 3.0.1 Fixed Multi-bytes cutter/chunk generator did not always cut correctly (PR #233) Changed Speedup provided by mypy/c 0.990 on Python >= 3.7
* Thu Oct 27 2022 Yogalakshmi Arunachalam - Update to 3.0.0 Added
* Extend the capability of explain=True when cp_isolation contains at most two entries (min one), will log in details of the Mess-detector results Support for alternative language frequency set in charset_normalizer.assets.FREQUENCIES Add parameter language_threshold in from_bytes, from_path and from_fp to adjust the minimum expected coherence ratio normalizer --version now specify if current version provide extra speedup (meaning mypyc compilation whl)
* Changed Build with static metadata using \'build\' frontend Make the language detection stricter Optional: Module md.py can be compiled using Mypyc to provide an extra speedup up to 4x faster than v2.1
* Fixed CLI with opt --normalize fail when using full path for files TooManyAccentuatedPlugin induce false positive on the mess detection when too few alpha character have been fed to it Sphinx warnings when generating the documentation
* Removed Coherence detector no longer return \'Simple English\' instead return \'English\' Coherence detector no longer return \'Classical Chinese\' instead return \'Chinese\' Breaking: Method first() and best() from CharsetMatch UTF-7 will no longer appear as \"detected\" without a recognized SIG/mark (is unreliable/conflict with ASCII) Breaking: Class aliases CharsetDetector, CharsetDoctor, CharsetNormalizerMatch and CharsetNormalizerMatches Breaking: Top-level function normalize Breaking: Properties chaos_secondary_pass, coherence_non_latin and w_counter from CharsetMatch Support for the backport unicodedata2
* Sat Sep 17 2022 Dirk Müller - update to 2.1.1:
* Function `normalize` scheduled for removal in 3.0
* Removed useless call to decode in fn is_unprintable (#206)
* Thu Aug 18 2022 Ben Greiner - Clean requirements: We don\'t need anything
* Tue Jul 19 2022 Dirk Müller - update to 2.1.0:
* Output the Unicode table version when running the CLI with `--version`
* Re-use decoded buffer for single byte character sets
* Fixing some performance bottlenecks
* Workaround potential bug in cpython with Zero Width No-Break Space located
* in Arabic Presentation Forms-B, Unicode 1.1 not acknowledged as space
* CLI default threshold aligned with the API threshold from
* Support for Python 3.5 (PR #192)
* Use of backport unicodedata from `unicodedata2` as Python is quickly catching up, scheduled for removal in 3.0
* Tue Feb 15 2022 Dirk Müller - update to 2.0.12:
* ASCII miss-detection on rare cases (PR #170)
* Explicit support for Python 3.11 (PR #164)
* The logging behavior have been completely reviewed, now using only TRACE and DEBUG levels
* Mon Jan 10 2022 Dirk Müller - update to 2.0.10:
* Fallback match entries might lead to UnicodeDecodeError for large bytes sequence
* Skipping the language-detection (CD) on ASCII
* Mon Dec 06 2021 Dirk Müller - update to 2.0.9:
* Moderating the logging impact (since 2.0.8) for specific environments
* Wrong logging level applied when setting kwarg `explain` to True
* Mon Nov 29 2021 Dirk Müller - update to 2.0.8:
* Improvement over Vietnamese detection
* MD improvement on trailing data and long foreign (non-pure latin)
* Efficiency improvements in cd/alphabet_languages
* call sum() without an intermediary list following PEP 289 recommendations
* Code style as refactored by Sourcery-AI
* Minor adjustment on the MD around european words
* Remove and replace SRTs from assets / tests
* Initialize the library logger with a `NullHandler` by default
* Setting kwarg `explain` to True will add provisionally
* Fix large (misleading) sequence giving UnicodeDecodeError
* Avoid using too insignificant chunk
* Add and expose function `set_logging_handler` to configure a specific StreamHandler
* Fri Nov 26 2021 Dirk Müller - require lower-case name instead of breaking build
* Thu Nov 25 2021 Matej Cepl - Use lower-case name of prettytable package
* Sun Oct 17 2021 Martin Hauke - Update to version 2.0.7
* Addition: bento Add support for Kazakh (Cyrillic) language detection
* Improvement: sparkle Further improve inferring the language from a given code page (single-byte).
* Removed: fire Remove redundant logging entry about detected language(s).
* Improvement: zap Refactoring for potential performance improvements in loops.
* Improvement: sparkles Various detection improvement (MD+CD).
* Bugfix: bug Fix a minor inconsistency between Python 3.5 and other versions regarding language detection.- Update to version 2.0.6
* Bugfix: bug Unforeseen regression with the loss of the backward-compatibility with some older minor of Python 3.5.x.
* Bugfix: bug Fix CLI crash when using --minimal output in certain cases.
* Improvement: sparkles Minor improvement to the detection efficiency (less than 1%).- Update to version 2.0.5
* Improvement: sparkles The BC-support with v1.x was improved, the old staticmethods are restored.
* Remove: fire The project no longer raise warning on tiny content given for detection, will be simply logged as warning instead.
* Improvement: sparkles The Unicode detection is slightly improved, see #93
* Bugfix: bug In some rare case, the chunks extractor could cut in the middle of a multi-byte character and could mislead the mess detection.
* Bugfix: bug Some rare \'space\' characters could trip up the UnprintablePlugin/Mess detection.
* Improvement: art Add syntax sugar __bool__ for results CharsetMatches list-container.- Update to version 2.0.4
* Improvement: sparkle Adjust the MD to lower the sensitivity, thus improving the global detection reliability.
* Improvement: sparkle Allow fallback on specified encoding if any.
* Bugfix: bug The CLI no longer raise an unexpected exception when no encoding has been found.
* Bugfix: bug Fix accessing the \'alphabets\' property when the payload contains surrogate characters.
* Bugfix: bug pencil2 The logger could mislead (explain=True) on detected languages and the impact of one MBCS match (in #72)
* Bugfix: bug Submatch factoring could be wrong in rare edge cases (in #72)
* Bugfix: bug Multiple files given to the CLI were ignored when publishing results to STDOUT. (After the first path) (in #72)
* Internal: art Fix line endings from CRLF to LF for certain files.- Update to version 2.0.3
* Improvement: sparkles Part of the detection mechanism has been improved to be less sensitive, resulting in more accurate detection results. Especially ASCII. #63 Fix #62
* Improvement: sparklesAccording to the community wishes, the detection will fall back on ASCII or UTF-8 in a last-resort case.- Update to version 2.0.2
* Bugfix: bug Empty/Too small JSON payload miss-detection fixed.
* Improvement: sparkler Don\'t inject unicodedata2 into sys.modules- Update to version 2.0.1
* Bugfix: bug Make it work where there isn\'t a filesystem available, dropping assets frequencies.json.
* Improvement: sparkles You may now use aliases in cp_isolation and cp_exclusion arguments.
* Bugfix: bug Using explain=False permanently disable the verbose output in the current runtime #47
* Bugfix: bug One log entry (language target preemptive) was not show in logs when using explain=True #47
* Bugfix: bug Fix undesired exception (ValueError) on getitem of instance CharsetMatches #52
* Improvement: wrench Public function normalize default args values were not aligned with from_bytes #53- Update to version 2.0.0
* Performance: zap 4x to 5 times faster than the previous 1.4.0 release.
* Performance: zap At least 2x faster than Chardet.
* Performance: zap Accent has been made on UTF-8 detection, should perform rather instantaneous.
* Improvement: back The backward compatibility with Chardet has been greatly improved. The legacy detect function returns an identical charset name whenever possible.
* Improvement: sparkle The detection mechanism has been slightly improved, now Turkish content is detected correctly (most of the time)
* Code: art The program has been rewritten to ease the readability and maintainability. (+Using static typing)
* Tests: heavy_check_mark New workflows are now in place to verify the following aspects: Performance, Backward- Compatibility with Chardet, and Detection Coverage in addition# to currents tests. (+CodeQL)
* Dependency: heavy_minus_sign This package no longer require anything when used with Python 3.5 (Dropped cached_property)
* Docs: pencil2 Performance claims have been updated, the guide to contributing, and the issue template.
* Improvement: sparkle Add --version argument to CLI
* Bugfix: bug The CLI output used the relative path of the file(s). Should be absolute.
* Deprecation: red_circle Methods coherence_non_latin, w_counter, chaos_secondary_pass of the class CharsetMatch are now deprecated and scheduled for removal in v3.0
* Improvement: sparkle If no language was detected in content, trying to infer it using the encoding name/alphabets used.
* Removal: fire Removed support for these languages: Catalan, Esperanto, Kazakh, Baque, Volapük, Azeri, Galician, Nynorsk, Macedonian, and Serbocroatian.
* Improvement: sparkle utf_7 detection has been reinstated.
* Removal: fire The exception hook on UnicodeDecodeError has been removed.- Update to version 1.4.1
* Improvement: art Logger configuration/usage no longer conflict with others #44- Update to version 1.4.0
* Dependency: heavy_minus_sign Using standard logging instead of using the package loguru.
* Dependency: heavy_minus_sign Dropping nose test framework in favor of the maintained pytest.
* Dependency: heavy_minus_sign Choose to not use dragonmapper package to help with gibberish Chinese/CJK text.
* Dependency: wrench heavy_minus_sign Require cached_property only for Python 3.5 due to constraint. Dropping for every other interpreter version.
* Bugfix: bug BOM marker in a CharsetNormalizerMatch instance could be False in rare cases even if obviously present. Due to the sub-match factoring process.
* Improvement: sparkler Return ASCII if given sequences fit.
* Performance: zap Huge improvement over the larges payload.
* Change: fire Stop support for UTF-7 that does not contain a SIG. (Contributions are welcome to improve that point)
* Feature: sparkler CLI now produces JSON consumable output.
* Dependency: Dropping PrettyTable, replaced with pure JSON output.
* Bugfix: bug Not searching properly for the BOM when trying utf32/16 parent codec.
* Other: zap Improving the package final size by compressing frequencies.json.
* Thu May 20 2021 pgajdosAATTsuse.com- version update to 1.3.9
* Bugfix: bug In some very rare cases, you may end up getting encode/decode errors due to a bad bytes payload #40
* Bugfix: bug Empty given payload for detection may cause an exception if trying to access the alphabets property. #39
* Bugfix: bug The legacy detect function should return UTF-8-SIG if sig is present in the payload. #38
* Tue Feb 09 2021 John Vandenberg - Switch to PyPI source- Add Suggests: python-unicodedata2- Remove executable bit from charset_normalizer/assets/frequencies.json- Update to v1.3.6
* Allow prettytable 2.0- from v1.3.5
* Dependencies refactor and add support for py 3.9 and 3.10
* Fix version parsing