Changelog for libindilx200-1-1.9.9-3.2.x86_64.rpm :

* Sun Dec 18 2022 Paolo Stivanin - Fix cfitsio dep on TW
* Wed Nov 30 2022 Paolo Stivanin - Update to 1.9.9:
* Driver for OpenAstroTech mounts
* DRIVER_INFO also present for F2 focuser so that the device is detected
* DeepSkyDad AF3: Mark as OK after backlash compensation
* Add Excalibur Driver
* Improved star brightness handling for higher gain
* Add Gemini L6 Flip Point
* lx200_OnStep minor fix
* Add missing rule for switch
* Fix client disconnect event
* Update weather interface to define update period, refresh and override
* Thu Sep 29 2022 Paolo Stivanin - Update to 1.9.8:
* Remove some debug message from indiserver.
* Don\'t tell cfitsio about preallocated buffers.
* Corrections for Pegasus Falcon Rotator.
* Fix blob id conflit.
* Adding wanderer cover v3.
* Fix memory leaks in indiserver.- Drop add-hem27.patch- Drop fix-cfitsio.patch- Drop fix-ioptron-meridian.patch- Drop fix-ioptron-timeout.patch- Drop fix-pegasus.patch
* Wed Aug 17 2022 Paolo Stivanin - Add fix-cfitsio.patch: FITS files produced by INDI are invalid because there is extra data at the end of the file. Many software only read the first HDU are not affected, but other reject the file.- Add fix-pegasus.patch: Corrections for Pegasus Falcon Rotator.
* Sun Aug 14 2022 Paolo Stivanin - Add add-hem27.patch: add support for iOptron HEM27 mount.
* Thu Aug 04 2022 Paolo Stivanin - Add fix-ioptron-meridian.patch: add again in case a timeout is issued and iOptron returns it despite the flush. This is an attempt to read this buffer again.- Add fix-ioptron-timeout.patch: save meridian flip settings by default on change.
* Fri Jul 29 2022 Paolo Stivanin - Update to 1.9.7:
* INDI Receiver and rtl-sdr.
* Ensure defensive check of UBP previous data to fix crash.
* Fast blob transfer.
* More AP changes: UDP, Home, Encoder Status, version major/minor.
* Fix memory leak when converting blob to base64.
* Use 8bits samples in the lookup table.
* Adding some basic PEC status and control to lx200gemini.
* Add Servo Precision control.
* Added RA/DEC guide speed.
* Fixed a bug where PEC was always enabled on startup.
* Various other fixes.
* Sat May 21 2022 Paolo Stivanin - Update to 1.9.6:
* add lastparked logic
* Fixing UTC Offset format allowing :SGHH:MM# where MM can be 00, 30 and 45
* Terminate commands missing #, introduce PEC recording and status
* fix issue reading worm position
* UTC uninitialized structure fix
* Add mount status. Start CP5
* Remove user choice for CM/CMR
* Allow any guide rate between 0.1x and 1x
* Driver for WandererRotatorLite
* Thu Mar 10 2022 Paolo Stivanin - Update to 1.9.5:
* Fixed updating of slew rate
* Add missing find_package for Qt5Core
* Fix setObjectRA and setObjectDEC for short and long format
* Allow Minutes Past Meridia +/- 180 degrees
* Adding new NexDome Beaver INDI driver
* Add and apply Meade Protocol spec definitions
* Add Pier Side Status for lx200zeq25
* Updated version of the AstroPhysics driver
* Fix Celestron focuser crash after calibration
* Fix but setting AP UTC
* Fix similar negative sign bug in AP driver
* Initial implementation for capture format and encode format
* Update driver interface when the LX200 support a focuser
* Add CEM70(G)-EC identifier and a deprecation note
* Add Driver for Esatto with Arco (goto, abort, sync, cal)- Remove 0001-Fix-warnings.patch
* Tue Jan 18 2022 Paolo Stivanin - Update to 1.9.4:
* OnStep: Don\'t show focuser tab unless found.
* More Lynx fixes - Step Size and Devices Types.
* OnStep: Remove Focuser on disconnect.
* Save Alignment Data to mount before sync.
* CCD drivers: snooping for standard epoch positions and issues with fast exposure mode fixed.
* SkyWatcher Alt-Az iterative GOTO.
* Add Bayer frames software binning
* Add driver for Rigelsys/Astrogene1000 nFrame rotator.
* Send command at start to flush serial line for Pulsar/Rigel dome.- Remove ioptron_fixes.patch
* Fri Dec 10 2021 Paolo Stivanin - Add ioptron_fixes.patch (bsc#1193622):
* Fix PEC being on by default, it should be OFF by default.
* Fix iOptronV3 parking bug by using a workaround, because the firmware must be fixed by iOptron.
* Add meridian behavior action and limit.
* Fri Nov 19 2021 Paolo Stivanin - Update to 1.9.3:
* Fast Exposure support. Capture next frame in camera immediately to avoid any delays.
* Support for DC focusers in Pegasus DMFC driver.
* Updates and cleanup for the OpenWeatherMap driver
* V42L driver supports detecting camera and renaming the driver
* LX200 SiteName Fix V2
* Improve lynx sync and homing behavior
* Fix FocusLynx GetConfig for focusers without HomeOnStart
* Force using hour angle when mount is slewing
* Correction the amplification values to spec.
* Fixes to PlaneWave EFA driver
* Add setting of home position for Rigel/Pulsar dome
* Wed Sep 15 2021 Paolo Stivanin - Update to 1.9.2:
* Stable Astrotrac Mount driver.
* ESATTO Backlash measure and correction
* Correct color space when stacking on indi_v4l2_ccd driver with a web cam that doesn\'t have color space info.
* The driver for the Planewave Delta-T was not working
* Improved handling of myFP2ESP controllers
* Pegasus UCH
* TheSkyX/Paramount Pier-side + guide async cmd fixes
* Update lx200_OnStep.cpp- Drop fix_include_path.patch
* Mon Jun 28 2021 Paolo Stivanin - Update to 1.9.1:
* New AstroTrac 360 driver (Experimental).
* New Pegasus FlatMaster and UHC drivers
* New Deep Sky Dad Field Rotator
* Core INDI Library improvements to base device and client classes
* Paramount TCP improvements
* Spectrograph and Receiver classes
* OnStep improvements
* RST-135 location and time fix
* Dome OTA fixes
* Object Azimuth and Altitude added to FITS header
* Rainbow Focuser fixes
* Support for CGX-L
* Fix crash in SkyWatcher API mount driver
* Fix iOptron DST bug
* Fix lunar and solar order
* PMC8 Driver v0.4 (Improved manual slewing, guiding, and other features)
* Try to send the guide pulses asynchronously to TheSkyX
* Use encoders for parking
* Lots of other smmall fixes, for the full changelog please check https://github.com/indilib/indi/blob/master/ChangeLog- Drop ioptron_dst_fix.patch (change has been upstreamed)- Add fix_include_path.patch
* Tue Jun 08 2021 Paolo Stivanin - Add ioptron_dst_fix.patch (fix boo#1187058) When using iOptron mounts and KStars is set to get time and location from the mount itself, if DST is enabled then KStars is off by 1 hour. This patch fixes this issue.
* Sat Apr 24 2021 Paolo Stivanin - Update to 1.9.0:
* Major INDI Library release v1.9.0 bring significant internal changes championed by AATTpawel-soja to modernize core INDI Library drivers and clients.
* New drivers for DeepSkyDad Flat Panel & Pegasus devices plus further improvements to PCM8 drivers.
* Mon Mar 01 2021 Paolo Stivanin - Update to 1.8.9: + Fix paramount home and sidereal rate + Added labels for USB and Dew + Add entry for star adventurer + Add motor rate and current to the config save + Add CEM26 and GEM28. Migrate CEM40 and GEM45 drivers to iOptronv3 commands and remove parking restrictions + Add preliminary support to inquire pier side for Paramount + Add support to Pegasus Micro + Updates to DDW driver + Increment version for SkyWAtcher Alt-Az + Add support for AZEQ6 + Fix celestrongps guide rate scaling + Various small fixes
* Mon Jan 11 2021 Paolo Stivanin - Update to 1.8.8: + New HOBYM Crux telescope driver + New Rainbow focuser driver + New ActiveFocuser driver release + 10Micron: UnattendedFlip handling + Bugfix/sat track lx200 julian day + Improved serial port auto-search. + Refactor/satellite tracking properties + SkyWatcher Alt-Az driver improvements. + Indibase/refactoring - update INDI::Property + Update of SmartFocus driver + Add new helper methods to the AlignmentSubsystemForDrivers (Alt/Az) + Streammanager/chrono - Fix the 24h time limit + Fix remote driver not sending properties to upstream server + Delay calculation in indicommon and indicorrelator (#1277) + Indidriver/refactoring - fix memory leak, increase performance + Streammanager/refactoring + Move absolute position bugfix + Use of the common mkpath function + Sesto Senso 2: Support for displaying 12V input voltage + Add Microsoft LifeCam Cinema to pixelSizeInfo + Sesto Senso 2: Log & display firmware version + fix: inline methods that use unlinked functions
* Wed Nov 25 2020 Paolo Stivanin - Update to 1.8.7: + New Esatto focuser support. + New Pegasus Falcon Rotator. + Fix QHYCFW3 driver handshake + Support for AZ-GTi in Alt-Az mode. + Improve on deadlocks and integrity + Rework/streammanager - fix recording subframe issue, add processing qeue, configurable limits memory/fps + Baader SteelDrive II - feature, Adjustable holding and move current for stepper drive + Do not block the stream thread when sending FPS status, fix frames discarding. + Many bug fixes and additions supporting advanced Pulsar2 features + Add support to connecting to all remote drivers without specifying an explicit driver. + Added Humidity, Pressure and Clouds to the WeatherWatcher driver + Fixed Losmandy Gemini failed to complete park issue + Set Eq Coords property state to OK & IDLE as needed + 1st fix for CEM25p Slewing to home position while parked + DSP Improvements + Compatibility fixed for SteelDriver II.
* Thu Aug 27 2020 Christophe Giboudeaux - Update to 1.8.6:
* New Pegasus PPBA driver.
* New DomePro2 driver.
* Add PierSide to indi_ioptron_telescope
* Fix Pier Side problem on Gemini mounts
* Goto mode selectable for Alt/Az mounts via an UI Switch.
* OnStep: Weather sensor (READ) support
* OnStep: Support for setting temperatures for dew heaters/focusers
* Fix skywatcher altaz crash
* Add the focus temperature property to the focus simulator
* Logitech HD C270 webcam data added to v4l2_ccd driver
* Astrophysics park3 support
* Implement Parking for LX200 classic
* UDP support for skywatcherAPI
* LX200 FS-2 Park
* Telescope Simulator Parking to HA/Dec frame
* Update Pointing State determination.
* Feature Satellite tracking with TLE for 10Micron mounts
* Add focuser temperature to FITS header
* myFocuserPro2 Fix coil power command
* Updated TeenAstro INDI driver for firmware 1.2.0- Use %cmake_build instead of %make_jobs
* Mon Apr 27 2020 wbauerAATTtmo.at- Update to version 1.8.5:
* New PlaneWave EFA driver.
* New PlaneWave Delta-T driver.
* New SestoSenso2 driver.
* New Lunatico DragonFly Rolloff driver.
* New Lunatico Seletek Rotator driver.
* New Radio Astronomy Interferometer Driver.
* Fixed parking in Temma driver.
* Improved Slew accuray for Celestron mounts.
* Improved TeenAstro Mount driver.
* Fixed declination issue in Rainbow driver.
* Fixed Guide problem with StarSense.
* Fixed AAG driver and Weather Parameters state.
* Fixed OnStep Speed change
* Added Park3 to AP mount driver.
* Improved XAGYL driver.
* Added hour axis offset to CCD Simulator.
* Added FOCUSPOS to the FITS header.
* Updated Telescope Simulator Driver.- Drop remove-unused-websocket-block.patch, merged upstream
* Mon Feb 24 2020 wbauerAATTtmo.at- Update to version 1.8.4:
* New TeenAstro Mount driver.
* New DSP plugin for Signal Processing.
* New INDI interface for correlators.
* Draft for Pulse Detectors (revealers, dosimeters, cosmic ray).
* Created SensorInterface and Spectrograph, Detector subclasses.
* Celestron PEC control is added that provides seek index, stop, playback and record commands.
* Celestron negative UTC fix.
* Fixed iOptron mount firmware parsing.
* Fixed version read in MoonLite focuser.
* DeepSkyDad3 backlash compensation.
* CCD Simulator bayer support.
* FCUSB2 support.
* Fixed complation on FreeBSD.- Add remove-unused-websocket-block.patch to fix build with websocketpp- Remove conditionals for outdated distribution versions
* Tue Jan 14 2020 wbauerAATTtmo.at- Update to version 1.8.3:
* New RainbowAstro Mount driver.
* New Simulated Pier Side option for all mounts.
* Added iOptron GEM45 support. (#1041)
* Added
*preliminary
* support for iOptron iPolar. (#1043)
* Update Celestron GPS Guide (#1048)
* Bug fix: meridian flip working for longer polling intervals (#1042)
* Update Celestron GPS Guide (#1048)
* Added recording the absolute position of the focuser to the FITS header (#1052)
* Fix enabling/disabling DMFC properties and remove dead code (#1050)
* Enable saving/loading backlash steps and fix motor type select (#1055)
* Sat Nov 09 2019 wbauerAATTtmo.at- Update to version 1.8.2:
* First release of INDI separate from INDI 3rd party repository.
* New Pular Domes driver.
* New MyFocuserPro2 driver.
* New SteelDriverII focuser driver.
* New Deep Sky Dad AF3 driver.
* Fixed INDI Client build on Windows.
* Fixed weather override functionality in INDI::Weather.
* Fixed INDI Dome tracking.
* Updated PCM8 driver to automatically detect mount types.
* Serial communication polling period is configurable 1-30 secs.
* Added ISGetConfigSwitch to read switch information directly from config. From version 1.8.1:
* Unified Toupbase driver for Touptek-based cameras.
* Support for native backlash handling in INDI::FocuserInterface
* Apogee fan control support.
* Fixed Bluetooth serial port connectivity.
* Updated version of OnStep driver (v1.8), fixes for Fork Mounts.
* Pegasus Ultimate Power Box v2 support.
* Fixed Celestron GPS focuser position.
* Fixed parking mode initialization for roll-off roofs.
* Fixed various FocusLynx issues and added Optec Sagitta focuser.
* LX200 Based mount migrated to INDI::FocuserInterface
* QHY SDK updated to 6.0.1. From version 1.8.0:
* iOptron CEM40 driver.
* QHYCCD CFW1 driver.
* Decode ATIK firmware version correctly.
* Apply gamma when downscaling 16bit to 8bit stream.
* Improve reliability of sendBlob.
* GPSD driver should use raw GPS time by default.
* add watchProperty to make client only request and only process properties of interest.
* Prevents indi_fli_wheel crash for FLI-CFW-1-8 model.
* Fix communication issues in Vixen Starbook driver.
* Fix Dew control and Current sensing on PPB.
* Fix out-of-bounds access in 420p conversion in V4L2 driver.
* Fix Atik guide ST4 pulses.
* ASI Camera SDK 1.14.0715 update.
* QHY SDK updated to 5.1.0.- Refresh 0001-Fix-warnings.patch
* Tue Jul 09 2019 wbauerAATTtmo.at- Update to version 1.7.9:
* New Astromechanic Light Pollution Meter driver.
* New FCUSB driver.
* SestoSenso driver motion issues resolved.
* LX200 drivers can operate over TCP.
* Fix TCFS issue when temperature sensor is not connected.
* Experimental support for KMTronic USB Relay Serial for Nikon cameras.
* Fix RA drift with HEQ5 firmware 106.
* Added dead-zones to joystick driver.
* Update ASI EAF SDK to version 0.1.0524.
* QHY SDK updated to 5.0.9. From version 1.7.8:
* New Omegon EQ500X mount driver.
* New TALON6 dome driver.
* New Astromechanics focuser driver.
* New DeepSkyDad AF2 focuser driver.
* New Apogee CFW filter wheel driver.
* Support for Radio Detector Streaming.
* ScopeDome fixes and improvements.
* Fixed Vixen Starbook version detection bug.
* Fixed Avalon Stargo Connect/Disconnect issue.
* Improved detection of Quantum wheel.
* Update Celestron SCT focuser to prevent moves when not calibrated.
* Improve Sync, Park, Focus Max in DreamFocuser driver.
* Implemented UI for PWM Outputs for OnStep
* Fixed subframe capture in QHY driver.
* ASI SDK updated to v1.14.0425.
* QHY SDK updated to 5.0.5.- Disable LTO to fix build on Tumbleweed/x86_64
* Sat Apr 27 2019 wbauerAATTtmo.at- Update to version 1.7.7:
* New DreamFocuser driver.
* New BeeFocus driver.
* New Weather Safety Proxy driver.
* Nexdome driver rewritten to INDI standards.
* DSP & Radio Detector improvements.
* Vixen Starbook driver received numerous updates and fixes.
* Celestron driver supports focuser control directly.
* Celestron driver resumes from last alignment. Fixed hibernation.
* Fixed QHY filter wheel issues & live streaming.
* Fixed QHY temperature controls in manual and auto modes.
* ATIK SDK updated & fixed filter wheel issues.
* Fix bulb exposures initiated with shutter release cable on Pentax cameras.
* QHY and SDR drivers enabled back on MacOS.
* Weather drivers offer a weather override toggle.
* All iOptron drivers now park to Alt/Az coordinates.
* Dome and Telescope scripts use safer methods to create temporary files.
* Enhanced performance and reliability of SestoSenso driver.
* Enhanced and extended telescope joystick controls.
* ASI SDK updated to v1.14.0227. Fixed asynchronous image loading.
* QHY SDK updated to 5.0.3.
* Tue Mar 26 2019 Christophe Giboudeaux - Update to 1.7.6. Changes in 1.7.6:
* Support for compressed FITS files via fpack lossless compression.
* Fixed USBFocusV3 connection issues.
* Improve indiserver message queue memory management.
* Fix bulb exposures initiated with shutter release cable on Pentax cameras.
* Fix negative declination issue in synscan.
* Added fix for QHY5-M- CancelQHYCCDExposing
* crash
* Fixed Temma guiding with PHD2.
* Fixed TCFS position and temperature.
* Fixed race condition when using multiple devices that can park.
* Fixes to INDI::Weather interface.
* Initialize backlash on eqmod connect.
* Focuser Interface should now natively support Focus Max Limit, Sync, and Reverse Direction.
* Preliminary support for Websockets in INDI::CCD. It is off by default. Changes in 1.7.5:
* Add fallback shutters speed for some GPhoto cameras.
* Add pier side support to Celestron and Synscan drivers.
* Add focus limits to SestoSenso driver.
* Major update to USBFocusV3 driver.
* Added stream struct and some astronomic helpers to libdspau.
* OnStep fixes and updates.
* FocusLynx refactor and updates.
* Geographic location update fixes in mount driver.
* Parking support in SS2000PC mount.
* TCFS refactoring and fixes.
* WeatherWatcher socket bug fixes.
* Fix Synscan J2000 epoch issue.
* Add XPIXSX and YPIXSX for logical binned pixel size.
* Fix problem with handling XML entities between clients, servers, and drivers.
* Fix feature stacking streamed frames to simulate absolute exposure.
* Fix iOptron guide rates.
* Fix iOptron calender setting.
* Removed Zulu prefix in FITS header timestamp. Check https://github.com/indilib/indi/releases for the complete changelog- Add 0001-Fix-warnings.patch- Remove binary blobs and unneded folders before building the package