Changelog for
python312-paho-mqtt-2.1.0-20.13.noarch.rpm :
* Thu May 02 2024 Dirk Müller
- update to 2.1.0:
* Make transition from 1.x to 2.x version smoother
* Fix \"protocol\" property
* Fix publish() a bytearray payload
* Fix some type annotations
* Fix loop_stop() not stopping thread when called from callback
* Fix some documentation errors
* Add support for Unix socket
* Fix flaky test
* Fri Mar 22 2024 pgajdosAATTsuse.com- version update to 2.0.0 -
*
*BREAKING
*
* Added callback_api_version. This break
*ALL
* users of paho-mqtt Client class. See migrations.md for details on how to upgrade. tl; dr; add CallbackAPIVersion.VERSION1 to first argument of Client() -
*
*BREAKING
*
* Drop support for Python 2.7, Python 3.5 and Python 3.6 Minimum tested version is Python 3.7 Python version up to Python 3.12 are tested. -
*
*BREAKING
*
* connect_srv changed it signature to take an additional bind_port parameter. This is a breaking change, but in previous version connect_srv was broken anyway. Closes #493. -
*
*BREAKING
*
* Remove some deprecated argument and method:
* ``max_packets`` argument in loop(), loop_write() and loop_forever() is removed
* ``force`` argument in loop_stop() is removed
* method ``message_retry_set()`` is removed -
*
*BREAKING
*
* Remove the base62, WebsocketWrapper and ConnectionState, as user shouldn\'t directly use them. - Possible breaking change: Add properties to access most Client attribute. Closes #764. Since this add new properties like `logger`, if a sub-class defined `logger`, the two `logger` will conflict. - Add version 2 of user-callback which allow to access MQTTv5 reason code & properties that were missing from on_publish callback. Also it\'s more consistent in parameter order or between MQTTv3 and MQTTv5. - Add types to Client class, which caused few change which should be compatible. Known risk of breaking changes: - Use enum for returned error code (like MQTT_ERR_SUCCESS). It use an IntEnum which should be a drop-in replacement. Excepted if someone is doing \"rc is 0\" instead of \"rc == 0\". - reason in on_connect callback when using MQTTv5 is now always a ReasonCode object. It used to possibly be an integer with the value 132. - MQTTMessage field \"dup\" and \"retain\" used to be integer with value 0 and 1. They are now boolean. - Add support for ALPN protocols on TLS connection. Closes #790 & #648. - Add on_pre_connect() callback, which is called immediately before a connection attempt is made. - Fix subscribe.simple with MQTTv5. Closes #707. - Use better name for thread started by loop_start. Closes #617. - Fix possible bug during disconnection where self._sock is unexpectedly None. Closes #686 & #505. - Fix loading too weak TLS CA file but setting allowed ciphers before loading CA. Closes #676. - Allow to manually ack QoS > 0 messages. Closes #753 & #348. - Improve tests & linters. Modernize build (drop setup.py, use pyproject.toml) - Fix is_connected property to correctly return False when connection is lost and loop_start/loop_forever isn\'t used. Closes #525. - Fix wait_for_publish that could hang with QoS == 0 message on reconnection or publish during connection. Closes #549. - Correctly mark connection as broken on SSL error and don\'t crash loop_forever. Closes #750. - Fix handling of MQTT v5.0 PUBREL messages with remaining length not equal to 2. Closes #696. - Raise error on ``subscribe()`` when `topic` is an empty list. Closes #690. - Raise error on `publish.multiple()` when ``msgs`` is an empty list. Closes #684. - Don\'t add port to Host: header for websockets connections when the port if the default port. Closes #666.
* does not require six
* Wed Dec 08 2021 pgajdosAATTsuse.com- %check: test the package
* Tue Nov 09 2021 Adrian Schröter - update to version 1.6.1: - Changed default TLS version to 1.2 instead of 1.0. - Fix incoming MQTT v5 messages with overall property length > 127 bytes being incorrectly decoded. Closes #541. - MQTTMessageInfo.wait_for_publish() and MQTTMessageInfo.is_published() will now raise exceptions if called when the publish call produced an error. Closes #550. - Remove periodic retry checks for outgoing messages with QoS>0. This means that outgoing messages will only be retried on the client reconnecting to the server. They will
*not
* be retried when the client is still connected. - The `rc` parameter in the `on_disconnect` callback now has meaningful values in the case of an error. Closes #441. - Callbacks can now be applied to client instances using decorators. - PUBACK messages are now sent to the broker only after the on_message callback has returned. - Raise exceptions when attempting to set MQTT v5 properties to forbidden values. Closes #586. - Callbacks can now be updated from within a callback. - Remove _out_packet_mutex and _current_out_packet_mutex and convert the _out_packet queue use to thread safe. - Add basic MQTT v5 support to the subscribe and publish helper functions. Closes #575. - Fix on_disconnect() sometimes calling the MQTT v3.x callback when it should call the MQTT v5 callback. Closes #570. - Big performance improvement when receiving large payloads, particularly for SSL. Closes #571, - Fix connecting with MQTT v5 to a broker that doesn\'t support MQTT v5. Closes #566. - Removed ancient Mosquitto compatibility class. - Fix exception on calling Client(client_id=\"\", clean_session=False). Closes #520. - Experimental support for Websockets continuation frames. Closes #500. Closes #89. - `Properties.json()` now converts Correlation Data bytes() objects to hex. Closes #555. - Only use the internal sockpair wakeup when running with loop_start() or loop(). This removes problems when running with an external event loop. - Drain all of sockpairR bytes to avoid unnecessary wakeups and possible timeouts. Closes #563. - Add timeout to MQTTMessageInfo:wait_for_publish().
* Wed Sep 23 2020 Martin Hauke - Update to version 1.5.1:
* Exceptions that occur in callbacks are no longer suppressed by default. They can optionally be suppressed by setting `client.suppress_exceptions = True`.
* Fix PUBREL remaining length of > 2 not being accepted for MQTT v5 message flows.
* Thu Oct 31 2019 antoine.belvireAATTopensuse.org- Update to version 1.5.0:
* Add support for clean_session on subscribe helper (gh#eclipse/paho.mqtt.python#219).
* Add support for non-standard bridge connection (gh#eclipse/paho.mqtt.python#282).
* Fix hang with QoS 2 message and clean_session = False. The fix replace hang with message DROP. See README for known limitation (gh#eclipse/paho.mqtt.python#284, gh#eclipse/paho.mqtt.python#286).
* Fix connection establishement timeout (gh#eclipse/paho.mqtt.python#291, gh#eclipse/paho.mqtt.python#288).
* Add support for connecting through a proxy (gh#eclipse/paho.mqtt.python#315).
* Add MQTT v5 support (gh#eclipse/paho.mqtt.python#334).
* Improve error message when sending queue is full (gh#eclipse/paho.mqtt.python#378).
* Improve error handling during initialization on edge case (gh#eclipse/paho.mqtt.python#387, gh#eclipse/paho.mqtt.python#388).
* Allow to specify local client port used (similar to bind_address) (gh#eclipse/paho.mqtt.python#390).
* Add method is_connected to know if MQTT connection is established (gh#eclipse/paho.mqtt.python#414).
* Set connection timeout to keepalive (gh#eclipse/paho.mqtt.python#425).
* Mon Dec 10 2018 Tomáš Chvátal - Fix fdupes call
* Sun Sep 02 2018 antoine.belvireAATTopensuse.org- Update to version 1.4.0:
* Fix hang when client restarted and broker resumed a session with Qos2 message.
* Fix reconnection loop when a clean_session=True client reconnect while Qos2 message are being sent.
* Catch and log any exception raised by user callback.
* Improve support for external event loop (like asyncio).
* Fix order of message with publish.multiple helper.
* Fix hang on wait_for_published() on bad network.
* Fix issue with Websocket payload size between 127 and 65536.
* Closes socket in client destructor to avoid FD leak.
* Fix uncaught timeout exception during connection.
* Remove dup flag on PUBREL packet.
* Use secure entropy source for Websocket mask_key (urandom).
* Fix mid generation that was not thread-safe.
* Replace print() statements with proper logging.
* Allow insecure TLS on publish and subscribe helpers.
* Allow to remove authentication (reset username to None).
* Add support for the non-standard bridge mode.
* Sat Nov 18 2017 antoine.belvireAATTopensuse.org- Update to version 1.3.1:
* Fix reconnect_delay_set which ignored the max_delay.
* Fix crash when connection is lost while trying to send message.
* Fix issue with unicode topic when some character were multi-bytes UTF-8.
* Fix issue with empty Client ID with broker that doesn\'t support them.
* Fix issue with tls_set that did not allowed cert_reqs=ssl.CERT_NONE.
* Sat Jul 08 2017 antoine.belvireAATTopensuse.org- Update to version 1.3.0:
* Requires Python 2.7 or 3.4+.
* Remove support for SSL without SSLContext (Requires Python 2.7.9+ or 3.2+).
* on_connect callback is now always called flags. Previously this
* callback could accepts 3 OR 4 arguments, now it must accepts 4.
* tls_insecure_set() must now be called
*after
* tls_set().
* Allow username and password to be zero length (as opposed to
* not being present).
* Allow zero length client ids when using MQTT v3.1.1.
* Add SSLContext support, including SNI.
* Improved support for unicode topic and binary payload.
* Allow arbitrary Websocket headers and path.
* Fix issue with large inbound payload over Websocket.
* Add exponential delay for reconnection.
* Move unit tests to pytest and tox.
* Add support for standard Python logging.
* Fix duplicate incoming QoS==2 message.
