Changelog for cryptsetup-ssh-2.7.2-208.1.x86_64.rpm :

* Tue Apr 09 2024 Andreas Stieger - update to 2.7.2:
* Fix activation of OPAL-only encrypted LUKS device with tokens
* Fix formatting of OPAL devices with 4096-byte sector size
* Fix incorrect OPAL locking range alignment calculation if used over an unaligned device partition.
* Do not check the passphrase quality for OPAL Admin PIN, as this passphrase already exists.
* Update license for FAQ document to CC BY-SA 4.0. NOTE: Please note that with OPAL-only (--hw-opal-only) encryption, the configured OPAL administrator PIN (passphrase) allows unlocking all configured locking ranges without LUKS keyslot decryption (without knowledge of LUKS passphrase). Because of many observed problems with compatibility, cryptsetup currently DOES NOT use OPAL single-user mode, which would allow such decoupling of OPAL admin PIN access.
* Wed Mar 13 2024 Pedro Monreal - Update to 2.7.1:
* Fix interrupted LUKS1 decryption resume. With the replacement of the cryptsetup-reencrypt tool by the cryptsetup reencrypt command, resuming the interrupted LUKS1 decryption operation could fail. LUKS2 was not affected.
* Allow --link-vk-to-keyring with --test-passphrase option. This option allows uploading the volume key in a user-specified kernel keyring without activating the device.
* Fix crash when --active-name was used in decryption initialization.
* Updates and changes to man pages, including indentation, sorting options alphabetically, fixing mistakes in crypt_set_keyring_to_link, and fixing some typos.
* Fix compilation with libargon2 when --disable-internal-argon2 was used.
* Do not require installed argon2.h header and never compile internal libargon2 code if the crypto library directly supports Argon2.
* Fixes to regression tests to support older Linux distributions.
* Mon Jan 29 2024 Pedro Monreal - Update to 2.7.0:
* Full changelog in: mirrors.edge.kernel.org/pub/linux/utils/cryptsetup/v2.7/v2.7.0-ReleaseNotes
* Introduce support for hardware OPAL disk encryption.
* plain mode: Set default cipher to aes-xts-plain64 and password hashing to sha256.
* Allow activation (open), luksResume, and luksAddKey to use the volume key stored in a keyring.
* Allow to store volume key to a user-specified keyring in open and luksResume commands.
* Do not flush IO operations if resize grows the device. This can help performance in specific cases where the encrypted device is extended automatically while running many IO operations.
* Use only half of detected free memory for Argon2 PBKDF on systems without swap (for LUKS2 new keyslot or format operations).
* Add the possibility to specify a directory for external LUKS2 token handlers (plugins).
* Do not allow reencryption/decryption on LUKS2 devices with authenticated encryption or hardware (OPAL) encryption.
* Do not fail LUKS format if the operation was interrupted on subsequent device wipe.
* Fix the LUKS2 keyslot option to be used while activating the device by a token.
* Properly report if the dm-verity device cannot be activated due to the inability to verify the signed root hash (ENOKEY).
* Fix to check passphrase for selected keyslot only when adding new keyslot.
* Fix to not wipe the keyslot area before in-place overwrite.
* bitlk: Fix segfaults when attempting to verify the volume key.
* Add --disable-blkid command line option to avoid blkid device check.
* Add support for the meson build system.
* Fix wipe operation that overwrites the whole device if used for LUKS2 header with no keyslot area.
* Fix luksErase to work with detached LUKS header.
* Disallow the use of internal kernel crypto driver names in \"capi\" specification.
* Fix reencryption to fail early for unknown cipher.
* tcrypt: Support new Blake2 hash for VeraCrypt.
* tcrypt: use hash values as substring for limiting KDF check.
* Add Aria cipher support and block size info.
* Do not decrease PBKDF parameters if the user forces them.
* Support OpenSSL 3.2 Argon2 implementation.
* Add support for Argon2 from libgcrypt (requires yet unreleased gcrypt 1.11).
* Used Argon2 PBKDF implementation is now reported in debug mode in the cryptographic backend version. For native support in OpenSSL 3.2 or libgcrypt 1.11, \"argon2\" is displayed. If libargon2 is used, \"cryptsetup libargon2\" (for embedded library) or \"external libargon2\" is displayed.
* Link only libcrypto from OpenSSL.
* Disable reencryption for Direct-Access (DAX) devices.
* Print a warning message if the device is not aligned to sector size.
* Fix sector size and integrity fields display for non-LUKS2 crypt devices for the status command.
* Fix suspend for LUKS2 with authenticated encryption (also suspend dm-integrity device underneath).
* Update keyring and locking documentation and LUKS2 specification for OPAL2 support.
* Remove patches fixed upstream: - cryptsetup-Check-for-physical-memory-available-also-in-PBKDF-be.patch - cryptsetup-Try-to-avoid-OOM-killer-on-low-memory-systems-withou.patch - cryptsetup-Use-only-half-of-detected-free-memory-on-systems-wit.patch
* Thu Jul 13 2023 Pedro Monreal - luksFormat: Handle system with low memory and no swap space [bsc#1211079]
* Check for physical memory available also in PBKDF benchmark.
* Try to avoid OOM killer on low-memory systems without swap.
* Use only half of detected free memory on systems without swap.
* Add patches: - cryptsetup-Check-for-physical-memory-available-also-in-PBKDF-be.patch - cryptsetup-Try-to-avoid-OOM-killer-on-low-memory-systems-withou.patch - cryptsetup-Use-only-half-of-detected-free-memory-on-systems-wit.patch
* Wed Jun 14 2023 Pedro Monreal - Enable running the regression test suite.- Force a regeneration of the man pages from AsciiDoc.- Add LUKS1 and LUKS2 On-Disk Format Specification pdfs to doc.
* Wed Jun 14 2023 Pedro Monreal - FIPS: Remove not needed libcryptsetup12-hmac package that contains the HMAC checksums for integrity checking for FIPS. [bsc#1185116]
* Remove the cryptsetup-rpmlintrc file.
* Remove not needed fipscheck dependency.
* Sun Feb 12 2023 Andreas Stieger - cryptsetup 2.6.1
* bitlk: Fixes for BitLocker-compatible on-disk metadata parser
* Fix possible iteration overflow in OpenSSL2 PBKDF2 crypto backend
* portability and compilation fixes
* verity: Fix possible hash offset setting overflow.
* bitlk: Fix use of startup BEK key on big-endian platforms.
* Do not initiate encryption (reencryption command) when the header and data devices are the same. If data device reduction is not requsted, this leads to data corruption since LUKS metadata was written over the data device.
* Fix possible memory leak if crypt_load() fails.
* Always use passphrases with a minimal 8 chars length for benchmarking, as used in some implementation of FIPS mode
* Tue Dec 27 2022 Ludwig Nussel - Replace transitional %usrmerged macro with regular version check (boo#1206798)
* Mon Nov 28 2022 Paolo Stivanin - cryptsetup 2.6.0:
* Introduce support for handling macOS FileVault2 devices (FVAULT2).
* libcryptsetup: no longer use global memory locking through mlockall()
* libcryptsetup: process priority is increased only for key derivation (PBKDF) calls.
* Add new LUKS keyslot context handling functions and API.
* The volume key may now be extracted using a passphrase, keyfile, or token. For LUKS devices, it also returns the volume key after a successful crypt_format call.
* Fix --disable-luks2-reencryption configuration option.
* cryptsetup: Print a better error message and warning if the format produces an image without space available for data.
* Print error if anti-forensic LUKS2 hash setting is not available. If the specified hash was not available, activation quietly failed.
* Fix internal crypt segment compare routine if the user specified cipher in kernel format (capi: prefix).
* cryptsetup: Add token unassign action. This action allows removing token binding on specific keyslot.
* veritysetup: add support for --use-tasklets option. This option sets try_verify_in_tasklet kernel dm-verity option (available since Linux kernel 6.0) to allow some performance improvement on specific systems.
* Provide pkgconfig Require.private settings. While we do not completely provide static build on udev systems, it helps produce statically linked binaries in certain situations.
* Always update automake library files if autogen.sh is run. For several releases, we distributed older automake scripts by mistake.
* reencryption: Fix user defined moved segment size in LUKS2 decryption. The --hotzone-size argument was ignored in cases where the actual data size was less than the original LUKS2 data offset.
* Delegate FIPS mode detection to configured crypto backend. System FIPS mode check no longer depends on /etc/system-fips file.
* Update documentation, including FAQ and man pages.
* Tue Sep 13 2022 Luca Boccassi - Add virtual provides for \'integritysetup\' and \'veritysetup\' to match package names provided by Fedora/RHEL, to allow the same set of dependencies to be used across all RPM distributions.
* Mon Aug 22 2022 Ludwig Nussel - cryptsetup 2.5.0:
* Split manual pages into per-action pages and use AsciiDoc format.
* Remove cryptsetup-reencrypt tool from the project and move reencryption to already existing \"cryptsetup reencrypt\" command. If you need to emulate the old cryptsetup-reencrypt binary, use simple wrappers script running \"exec cryptsetup reencrypt $AATT\".
* LUKS2: implement --decryption option that allows LUKS removal.
* Fix decryption operation with --active-name option and restrict it to be used only with LUKS2.
* Do not refresh reencryption digest when not needed. This should speed up the reencryption resume process.
* Store proper resilience data in LUKS2 reencrypt initialization. Resuming reencryption now does not require specification of resilience type parameters if these are the same as during initialization.
* Properly wipe the unused area after reencryption with datashift in the forward direction.
* Check datashift value against larger sector size. For example, it could cause an issue if misaligned 4K sector appears during decryption.
* Do not allow sector size increase reencryption in offline mode.
* Do not allow dangerous sector size change during reencryption.
* Ask the user for confirmation before resuming reencryption.
* Do not resume reencryption with conflicting parameters.
* Add --force-offline-reencrypt option.
* Do not allow nested encryption in LUKS reencrypt.
* Support all options allowed with luksFormat with encrypt action.
* Add resize action to integritysetup.
* Remove obsolete dracut plugin reencryption example.
* Fix possible keyslot area size overflow during conversion to LUKS2.
* Allow use of --header option for cryptsetup close.
* Fix activation of LUKS2 device with integrity and detached header.
* Add ZEROOUT IOCTL support for crypt_wipe API call.
* VERITY: set loopback sector size according to dm-verity block sizes.
* veritysetup: dump device sizes.
* LUKS2 token: prefer token PIN query before passphrase in some cases. When a user provides --token-type or specific --token-id, a token PIN query is preferred to a passphrase query.
* LUKS2 token: allow tokens to be replaced with --token-replace option for cryptsetup token command.
* LUKS2 token: do not continue operation when interrupted in PIN prompt.
* Add --progress-json parameter to utilities.
* Add support for --key-slot option in luksResume action.- move man pages to separate subpackage- drop backports handling
* Fri Jan 14 2022 Andreas Stieger - cryptsetup 2.4.3:
* Fix possible attacks against data confidentiality through LUKS2 online reencryption extension crash recovery CVE-2021-4122, boo#1194469
* Add configure option --disable-luks2-reencryption to completely disable LUKS2 reencryption code.
* Improve internal metadata validation code for reencryption metadata
* Add updated documentation for LUKS2 On-Disk Format Specification version 1.1.0
* Fix support for bitlk (BitLocker compatible) startup key with new metadata entry introduced in Windows 11
* Fix space restriction for LUKS2 reencryption with data shift
* Thu Nov 18 2021 Andreas Stieger - cryptsetup 2.4.2:
* Fix possible large memory allocation if LUKS2 header size is invalid.
* Fix memory corruption in debug message printing LUKS2 checksum.
* veritysetup: remove link to the UUID library for the static build.
* Remove link to pwquality library for integritysetup and veritysetup. These tools do not read passphrases.
* OpenSSL3 backend: avoid remaining deprecated calls in API. Crypto backend no longer use API deprecated in OpenSSL 3.0
* Check if kernel device-mapper create device failed in an early phase. This happens when a concurrent creation of device-mapper devices meets in the very early state.
* Do not set compiler optimization flag for Argon2 KDF if the memory wipe is implemented in libc.
* Do not attempt to unload LUKS2 tokens if external tokens are disabled. This allows building a static binary with - -disable-external-tokens.
* LUKS convert: also check sysfs for device activity. If udev symlink is missing, code fallbacks to sysfs scan to prevent data corruption for the active device.
* Thu Sep 16 2021 Ludwig Nussel - cryptsetup 2.4.1
* Fix compilation for libc implementations without dlvsym().
* Fix compilation and tests on systems with non-standard libraries
* Try to workaround some issues on systems without udev support.
* Fixes for OpenSSL3 crypto backend (including FIPS mode).
* Print error message when assigning a token to an inactive keyslot.
* Fix offset bug in LUKS2 encryption code if --offset option was used.
* Do not allow LUKS2 decryption for devices with data offset.
* Fix LUKS1 cryptsetup repair command for some specific problems.
* Wed Aug 25 2021 Ludwig Nussel - As YaST passes necessary parameters to cryptsetup anyway, we do not necessarily need to take grub into consideration. So back to Argon2 to see how it goes.
* Tue Aug 03 2021 Ludwig Nussel - need to use PBKDF2 by default for LUKS2 as grub can\'t decrypt when using Argon.
* Mon Aug 02 2021 Ludwig Nussel - cryptsetup 2.4.0 (jsc#SLE-20275)
* External LUKS token plugins
* Experimental SSH token
* Default LUKS2 PBKDF is now Argon2id
* Increase minimal memory cost for Argon2 benchmark to 64MiB.
* Autodetect optimal encryption sector size on LUKS2 format.
* Use VeraCrypt option by default and add --disable-veracrypt option.
* Support --hash and --cipher to limit opening time for TCRYPT type
* Fixed default OpenSSL crypt backend support for OpenSSL3.
* integritysetup: add integrity-recalculate-reset flag.
* cryptsetup: retains keyslot number in luksChangeKey for LUKS2.
* Fix cryptsetup resize using LUKS2 tokens.
* Add close --deferred and --cancel-deferred options.
* Rewritten command-line option parsing to avoid libpopt arguments memory leaks.
* Add --test-args option.
* Mon Aug 02 2021 Fabian Vogt - Use LUKS2 as default format on Tumbleweed. It provides some additional features which other tools (e.g. systemd-cryptenroll) rely on. GRUB 2.06 supports unlocking LUKS2 volumes meanwhile.
* Thu Jul 01 2021 Ludwig Nussel - cryptsetup 2.3.6:
* integritysetup: Fix possible dm-integrity mapping table truncation.
* cryptsetup: Backup header can be used to activate TCRYPT device. Use --header option to specify the header.
* cryptsetup: Avoid LUKS2 decryption without detached header. This feature will be added later and is currently not supported.
* Additional fixes and workarounds for common warnings produced by some static analysis tools (like gcc-11 analyzer) and additional code hardening.
* Fix standalone libintl detection for compiled tests.
* Add Blake2b and Blake2s hash support for crypto backends. Kernel and gcrypt crypto backend support all variants. OpenSSL supports only Blake2b-512 and Blake2s-256. Crypto backend supports kernel notation e.g. \"blake2b-512\".
* Sat Mar 13 2021 Andreas Stieger - cryptsetup 2.3.5:
* Fix partial reads of passphrase from an interactive terminal
* Fix maximum length of password entered through a terminal
* integritysetup: support new dm-integrity HMAC recalculation options
* integritysetup: display of recalculating sector in dump command
* veritysetup: fix verity FEC if stored in the same image with hashes
* veritysetup: run FEC repair check even if root hash fails
* veritysetup: do not process hash image if hash area is empty
* veritysetup: store verity hash algorithm in superblock in lowercase
* bitlk: fix a crash if the device disappears during BitLocker scan
* bitlk: show a better error when trying to open an NTFS device
* bitlk: add support for startup key protected VMKs
* Fix LUKS1 repair code (regression since version 1.7.x)
* Fix luksKeyChange for LUKS2 with assigned tokens
* Fix cryptsetup resize using LUKS2 tokens
* Print a visible error if device resize is not supported
* Add error message when suspending wrong non-LUKS device
* Fix default XTS mode key size in reencryption
* Rephrase missing locking directory warning and move it to debug level
* Many fixes for the use of cipher_null (empty debug cipher)
* Fixes for libpasswdqc 2.0.x (optional passphrase quality check)
* Fixes for problems discovered by various tools for code analysis
* Various fixes to man pages- silence hmac packaging warnings
* Fri Mar 12 2021 Dirk Müller - move licenses to licensedir