Changelog for tuned-ppd-2.24.0.2+git.c082797-105.1.noarch.rpm :

* Sun Aug 25 2024 pallasweptAATTproton.me- Migrate profiles to /etc/tuned/profiles/ and /usr/lib/tuned/profiles/
* Per upstream #615 and #609- Update to version 2.24.0.2+git.c082797:
* controller init: set _on_battery before switching profile- New release (2.24.0)
* Clear plugin repository when stopping tuning
* man: add description of the balanced-battery profile- New release (2.24.0-rc.1)
* chore: remove dead irqbalance functions
* plugin_irqbalance: switch to IRQBALANCE_BANNED_CPULIST
* hotplug: wait for device initialization
* Add `functions` to the files copied by the release-cp Makefile target
* Add package2cpus and packages2uncores matcher functions
* uncore: Allow to configure frequency limits using percent
* plugin_scheduler: Adjust error logging in _set_affinity
* fix: expand variables in plugin_irq
* tests: Restore TuneD service after the error messages test
* tests: Do not run tunedDisableSystemdRateLimitingStart via rlRun
* Enable controller reset for audio by default
* tuned-ppd: Adjust log message emitted when battery status changes
* tuned-ppd: Refactor daemon initialization
* tuned-ppd: Remove magic constant \"unknown\"
* Add support for controlling amd-pstate core performance boost
* spec: Start tuned-ppd right away if swapping from active PPD
* spec: Add standard systemd scriptlet macros for tuned-ppd
* tuned-ppd: Remove PIDFile from the systemd service file
* tuned-ppd: Add an option to log to a file
* Install script functions and recommend.d to /usr/lib/tuned/
* Rename TUNED_PROFILESDIR to TUNED_PROFILES_DIR
* CNF-13015: Fix helper function not accessing the correct return result
* CNF-13015: Add helper function to run `lscpu` and parse result using regex parameters - This is similar to the cpuinfo function that reads from /proc/cpuinfo - Unfortunately that function was insufficient for our needs as we need to identify both the Vendor and Architecture reliably
* Sat Jun 22 2024 tobi.goergensAATTgmail.com- Update to version 2.23.0.2+git.5d5dbfc:
* chore: remove use of deprecated Logger.warn()
* new release (2.23.0)
* Disk plugin: make hdparm device checks lazy
* Revert \"Video plugin: make hdparm device checks lazy\"
* Video plugin: make hdparm device checks lazy
* Do not check for x86_energy_perf_policy if it won\'t be used
* Check that writes are necessary if they may cause redundant IPIs
* Add an option to skip `write_to_file` if the content would not change
* Turn on amdgpu panel power savings in balanced-battery
* Modify the video plugin for tuning of the amdgpu `panel_power_savings` attribute
* video: Don\'t show error when trying to read radeon files
* video: make missing radeon_powersave files quieter
* video: Rename _radeon_powersave_files to _files
* feat: add plugin_irq
* throughput-performance: dropped unused AMD related variable
* ppd: Adjust the detection of \'performance-degraded\'
* ppd: Fix hold releasing
* ppd: Add debug logs when changing base profile
* Re-check dbus when (re)starting TuneD from tuned-adm profile
* functions: added \'log\' which helps with debugging
* Simplify reading/writing from/to sysctl by using existing functions
* Fix logs in `commands.read_file`
* plugin_cpu: decrease the severity of _has_pm_qos==False
* sap-netweaver: increased vm.max_map_count
* daemon: buffer sighup signal
* tuned-ppd: Detect battery change events
* Migrate profiles to /etc/tuned/profiles/ and /usr/lib/tuned/profiles/
* Propagate unexpected exceptions in the wait exception handler
* Add an option to configure profile directories
* Use get_list to parse unix_socket_signal_path
* Add a function to parse lists in the global configuration
* Added intel_recommended_pstate builtin function.
* dbus: add commands to dynamically create/destroy instances
* dbus: ensure that hotplug operations only work on hotplug plugins
* instance: add priority as a property
* monitor_net: fixed traceback if stats cannot be read
* plugin_net: do not read monitors if dynamic tuning is disabled
* Allow equal characters in parameter value
* Thu Feb 29 2024 trennAATTsuse.de- Update to version 2.22.1.2+git.86ac977:
* fix-error
* new release (2.22.1)
* Rename plugin_intel_uncore.py to plugin_uncore.py
* Rename IntelUncorePlugin to UncorePlugin
* network-throughput: increased net.ipv4.tcp_rmem default value
* spec: cleanup, drop RHEL dynamic_tuning customization
* new release (2.22.0)- Polkit changes got accepted by security review (bsc#1220081)
* Fri Feb 16 2024 trennAATTsuse.de- Update to version 2.22.0.rc.1.0+git.ad314ee:
* Disable dynamic tuning by default
* plugin_cpu: improved backward compat. of the pm_qos parser warnings
* Sun Feb 11 2024 trennAATTsuse.de- Update to version 2.22.0-rc.1.0+git.ad314ee:
* new release (2.22.0-rc.1)
* Add missing install command for tuned-ppd.py
* Fixes for intel uncore plugin
* Add intel uncore plugin
* scheduler: add option for ignoring IRQs affinity
* Configure the PPD-to-TuneD daemon to work as a replacement of PPD
* Implement the PPD-to-TuneD daemon
* Make DBusExporter reusable for other services
* Do not report errors on systems with no wifi
* Add an ACPI plugin
* plugin_cpu: Support cstate settings of `pm_qos_resume_latency_us`
* Skip calling rpm-ostree kargs in no-op case
* Expand sysctl plugin options when reporting overrides
* profiles: add energy_performance_preference hints to profiles
* hotplug: do not report ENOENT errors on device remove
* profiles: Improve \'isolated_cores=\' help text
* Be explicit about amd-pstate support
* Fixed REs escape sequences not to trigger SyntaxWarning
* sap-hana-kvm-guest: fix whitespaces
* Fix TextView to expand with window
* Mon Dec 04 2023 aschnellAATTsuse.com- do not package inoperable plugins (bsc#1217758)
* Wed Nov 15 2023 trennAATTsuse.de- Update to version 2.21.0.17+git.5d3b469:
* Add API functions to retrieve active instances and their devices
* Add a tuned-adm command for moving devices between plugin instances
* Add support for sysctl names with slash
* Make all functions in plugin_sysctl.py methods of SysctlPlugin
* RHEL-3689: Print all arguments of failing command in err_msg
* style: fix inconsistent whitespace in plugin_cpu.py
* Return 0 when ksm services do not exist
* fix error
* Converted SPEC file license to SPDX
* Fri Sep 15 2023 trennAATTsuse.de- Update to version 2.21.0.0+git.670541d:
* new release (2.21.0)
* api: fixed stop method not to require any parameter
* new release (2.21.0-rc.1)
* gui: multiple fixes and warnings removal
* gui: fixed inconsistent tabs and spaces, introduced by #516
* Serialize SIGHUP processing
* No errors when physical_package_id file does not exist
* Update tests: disable systemd rate limiting.
* network-latency: enable rcu_normal_after_boot=1 kernel parameter
* remove ktimer_lockless_check sysfs setting from realtime-virtual profiles
* move rtentsk to network-latency profile
* move \"tsc=reliable\" setting from realtime to network-latency tuned configuration
* unify common sysctl settings between realtime and cpu-partitioning profiles
* Rename rollback-related constants and variables
* Add rollback option to tuned-main.conf
* Recast README into MarkDown with various minor corrections and improvements
* Remove setting ip forwarding via openshift profile
* Fix logging in [scheduler] plug-in
* fixed sap-hana docu regarding processor power settings
* Added sap-hana-kvm-guest profile
* tests/beakerlib: Add new test which covers socket API.
* plugin_net: expand variables properly
* fix typo
* add error dialog when no active profile set
* Fri Apr 14 2023 trennAATTsuse.de- New polkit interface has been reviewed by security bsc#1185418- Remove old outdated spec scripts before suse_version 1500- Separate SAP and related profiles to not be installed in SLE 15 SPx and older, but add them with openSUSE (as before), ALP and upcoming SLE distros- Update to version tuned-2.20.0.18+git.7b1a20b
* scheduler: fix traceback if running with runtime=0
* plugin_scheduler: fix perf fd leaks
* Better log on unsupported hw for pm_qos_resume_latency_us option
* fix-tuned-profiles-adoc-error
* explicitly use /bin/bash for tuned scripts
* set the icon in the about dialog
* install dbus policy in /usr/share/dbus-1
* tuned-adm: better error message for unauthorized switch_profile
* man: updated manual pages to be more consistent
* spec: dropped unneeded ncat dependency
* fix log error
* Report reapplied sysctls only on different values
* Fixing no _evlist attribute when run without daemon
* fix \'is_active\' does not work
* new release (2.20.0-rc.1)
* build: fixed FTBFS with python2
* Expose TuneD API to the Unix Domain Socket.
* Inform users about reapplied sysctls
* API: add support for moving devices between instances
* throughput-performance: set net.core.somaxconn to at least 2048
* Adding support for cpu intel_pstate scaling driver
* configparser: use no strict parser to mimic old behavior
* Adding pm_qos_resume_latency_us option for cpu plugin.i
* Makefile: added fix for python-3.12
* D-Bus: only send tracebacks through the D-Bus if in the debug mode
* update vendor_url in policy file
* correct section of the tuned-profiles-openshift manpage
* Allow selecting a different pkg-config executable
* fix tuned/gtk/gui_profile_loader.py spell error
* bootloader: create bootcmdline even when skip_grub_config=true
* profiles: added aws profile for aws ec2 instances
* Closing fd from perf module in scheduler plugin
* Tue Dec 27 2022 trennAATTsuse.de- Update to version 2.19.0.29+git.b894a3e:
* Fix for catching exceptions in profile loader.
* Add new cpu-partitioning-powersave profile
* Add CodeQL workflow for GitHub code scanning
* Fixed sysvinit path
* systemd: relax polkit requirement
* realtime-virtual-
*: Tune priority of new ktimers threads
* hpc-compute profile: Remove vm.hugepages_treat_as_movable
* fix spelling error
* Profile openshift: increase fs.aio-max-nr tunable
* new release (2.19.0)
* packit: s/synced_files/files_to_sync/
* packit: metadata field is no longer needed
* packit: build SRPM in Copr
* profiles: drop sched_ tuning from openshift-control-plane
* new release (2.19.0-rc.1)
* builtin functions: added calc_isolated_cores function
* spec: dropped weak deps where not needed
* Update tuned-adm.bash
* TuneD plug-in documentation.
* Adding mtu command to net plugin
* openshift profile: tuning for NVMe devices
* Add version/help command automatic complete
* Do not hardcode disk name in tuned initrd path.
* bootloader: cmdline parser change and fixed escaping
* Fix in polkit authorization.
* realtime: Set tsc as \'reliable\'
* recommend: do not ignore syspurpose_role if there is no syspurpose
* Fixing arguments in disk plugin method
* Default delimiters causing errors in some specific situations, inline comments
* gui: fixed possible traceback in the save_profile
* Striping quotes when unpacking cpu list
* profiles: improve regexes to match kernel threads
* Thu Aug 11 2022 Callum Farmer - Use %_modprobedir- Move dbus-1 system.d file to /usr (bsc#1202339)
* Tue Apr 26 2022 Dominique Leuenberger - Own %{_prefix}/lib/kernel and subdirectories: fix build on Factory.
* Tue Mar 15 2022 trennAATTsuse.de- Add new openshift platform profiles- Instead of adding all profiles to main package and exclude subpackage profiles, explicitly mention all added profiles in %files section- Sort (alphabetically) profiles and packages- Update to version 2.18.0.8+git.6f907c9:
* beakerlib: fix systemd rate limiting for variables-support-in-profiles
* scheduler: fix construction of the process name regex
* Added more conflicting implementations to the systemd unit file.
* raise the netfilter hash table size in openshift/atomic-{host,guest} to match the max netfilter conntrack entries, reducing such hash table load.
* Fixing save call and comments in tuned gui
* Adding option \"txqueuelen\" to net_plugin
* bootloader: on s390(x) remove TuneD variables from the BLS
* daemon: don\'t do full rollback on systemd failure
* profiles: use cstate.id_no_zero instead of the cstate.id
* Expanding cpu plugin force_latency option syntax
* Adding support for nvme subsystem block devices and adding tests so it won\'t throw errors on hdparms commands.
* Fix improper parsing of include directive
* application: log TuneD and kernel version
* readme: mention conflicting cpupower and power-profiles-daemon
* dbus: fix traceback on python-2.7
* cpu_partitioning: fixed no_balance_cores on newer kernels
* spec: do not require subscription-manager on CentOS
* Add conditional profile loading
* openshift profile: workaround high CPU utilization of [scheduler] plug-in.
* scheduler: new option cgroup_ps_blacklist
* breaking up various modules and implementing neccessary new syntax used downstream to keep docs repos synced
* Fri Sep 10 2021 trennAATTsuse.de- Update to version 2.16.0:
* bootloader: make skip_grub_config consistent with initrd_remove_dir
* Fri Jul 09 2021 trennAATTsuse.de- Update to version 2.15.0+git.1625694366.bc3f737:
* bootloader: support for systems that don\'t have grub installed
* Removing depedency on python-decorator package.
* Adding support for rpm-ostree system to bootloader plugin.
* profiles: drop sched_ tuning where appropriate
* scheduler: abstract sched_ and numa_ knobs
* realtime-virtual-
*: Set irqaffinity through kernel command line
* After error while switching profiles attribute _active_profiles is not changed back. That causes issues with wrong signals (and also more issues with restart after etc)- Enhance _service file
* Mon Apr 19 2021 trennAATTsuse.de- Update _service file to always get latest sources from github master branch and auto-set version correctly- Update to version v2.15.0+git.20210416.e828fa8:
* plugin_net: Fix check for channels supported mode
* udev: explicitly sort udev properties
* powertop2tuned: work with PowerTOP 2.13 and newer
* Changes to scheduler plugin to support os interface instead of schedutils in newer python versions.
* Lower the threading.Event\'s wait() timeout.
* added postgresql server profile
* spectrumcale-ece: package the profile to own subpackage