Changelog for netcdf-gnu-hpc-4.6.1-bp151.5.6.1.noarch.rpm :

* Mon Jul 20 2020 Egbert Eich - Remove requirements for parallel-netcdf from non-HPC builds: without the \'--enable-pnetcdf\' configure option, this doesn\'t make sense.
* Mon Jul 20 2020 Egbert Eich - Remove build restrictions for SLE builds: build all flavors for SLE.- Fix ldconfig args for HPC packages: no caching should be done as these libs are made available thru LD_LIBRARY_PATH tweaking.- Adhere to common conventions regarding NetCDF and PnetCDF: NetCDF modules should be called \'netcdf\' - regardless whether they are \'serial\' or use MPI (boo#1174291).
* Tue May 08 2018 adrianAATTsuse.de- go back to hdf5 1.10
* Mon Apr 30 2018 eichAATTsuse.com- Fix devel-data package conflicts by a Provides/Conflicts that doesn\'t collide with a package name.
* Mon Apr 30 2018 eichAATTsuse.com- Remove the \'ring magic\' as this seems to create issues during verification.
* Mon Apr 30 2018 eichAATTsuse.com- (Temporarily) disable fpr S390
* as a check test fails currently on BE.
* Mon Apr 30 2018 eichAATTsuse.com- Fix dependency issues with non-HPC devel packages and devel-data.
* Mon Apr 30 2018 eichAATTsuse.com- Add a dependency to the HPC master package of the correct flavor of libhdf5_hl (bsc#1091243).
* Tue Apr 24 2018 jberryAATTsuse.com- Avoid file conflict between devel-data packages over rpm macros.
* Wed Apr 11 2018 eichAATTsuse.com- Disable non-HPC builds on non-openSUSE systems: a. currently only SUSE products/projects are supported/ b. non-HPC builds are not and have never been supported on SLE, on openSUSE they are provided for compatibility reasons.
* Wed Apr 04 2018 adrianAATTsuse.de- update to version 4.6.1 (FATE#325561)
* changes since 4.4.4.1 are documented here: https://www.unidata.ucar.edu/blogs/news/entry/netcdf-4-6-1 https://www.unidata.ucar.edu/blogs/news/entry/netcdf-4-6-0 https://www.unidata.ucar.edu/blogs/news/entry/netcdf-4-5-0- Obsoletes all patches: netcdf-disable-szip-linking.patch netcdf-h5-test-fix-type-mismatch.patch netcdf-no_date_time.patch- drop hdf4 support- use version 1.8 of hdf5 in non-hpc mode to avoid incompatible on-disk data
* Fri Feb 09 2018 eichAATTsuse.com- Add support for openmpi2 for HPC (FATE#325089).
* Fri Feb 09 2018 cgollAATTsuse.com- Fix summary in module files (bnc#1080259)
* Fri Jan 19 2018 eichAATTsuse.com- Change the name of the MPI version of the module file directory to pnetcdf to distinguish it from the \'serial\' one (boo#1075933).
* Fri Jan 12 2018 eichAATTsuse.com- Disable the openmpi3 flavor in some products.
* Fri Jan 05 2018 eichAATTsuse.com- Switch from gcc6 to gcc7 as additional compiler flavor for HPC on SLES.- Add support for mpich and openmpi3 for HPC.
* Fri Nov 10 2017 eichAATTsuse.com- Add dependency on the hpdf5 library package to the netdf libary package.
* Thu Nov 02 2017 eichAATTsuse.com- Simplify Group: - do not destinguish between MPI and non-MPI: the IBS check scripts cannot handle this well.
* Mon Oct 30 2017 eichAATTsuse.com- Fix wrong Requires: in static package.
* Sat Oct 28 2017 eichAATTsuse.com- Add minimal mpi-selector support for non-HPC MPI build. This will avoid the MPI packages to conflict with the \'serial\' ones as both provide the same files and libs.
* Sat Oct 28 2017 eichAATTsuse.com- Fix botched dependency for libpnetcdf-.
* Tue Oct 24 2017 jjollyAATTsuse.com- Added patch netcdf-h5-test-fix-type-mismatch.patch
* Fixes type mismatch in test tst_h_dimscales (bsc#1064705).
* Thu Oct 19 2017 eichAATTsuse.com- Source mpivars.sh to fix the non-HPC openmpi %check.
* Tue Oct 17 2017 eichAATTsuse.com- Add magic to limit the number of flavors built in the in the OBS ring.
* Wed Sep 13 2017 eichAATTsuse.com- Incorporated HPC-style builds using environment modules.- Converted to multibuild (FATE#321719).- renamed rpmlintrc to netcdf-rpmlintrc.- Generate baselib.conf dynamically and only for the non-HPC build: this avoids issues with the source validator.
* Tue Sep 12 2017 badshah400AATTgmail.com- Update to version 4.4.1.1: - Fixed an issue where ncgen would potentially crash or write incorrect netCDF4 binary data under very specific circumstances [gh#Unidata/netcdf-c#323]. - Updated documentation related to netCDF variable names and DAP2 access to reflect the undefined behavior potentially observed when DAP2 reserved keywords are used as netCDF variable names. - Fixed an issue with nc_inq_type() not returning proper value in some circumstances [gh#Unidata/netcdf-c#317]. - Corrected an issue related to test failures when - -disable-utilities or -DENABLE_UTILITIES=OFF are specified when building with autotools or cmake, respectively [gh#Unidata/netcdf-c#313]. - Corrected a behavioral issue with the _NCProperties attribute taking up too much space [gh#Unidata/netcdf-c#300], [gh#Unidata/netcdf-c#301]. - Corrected behavior for nc-config so that, if nf-config is found in system, the proper fortran-related information will be conveyed [gh#Unidata/netcdf-c#296].- Add netcdf-disable-szip-linking.patch: Disable building with szip support for now, since test nc_test4/tst_interops5.c fails otherwise; this is likely to be fixed with version 4.5.0 of netcdf, but requires big enough changes that we don\'t backport it here. Necessitates BuildRequires on libtool and running autoreconf before configure.
* Thu Feb 09 2017 dimstarAATTopensuse.org- Explicitly BuildRequire m4
* Sat Aug 06 2016 wbauerAATTtmo.at- Remove %{optflags} from CFLAGS for now to fix build with hdf5-1.10 in Factory, see https://github.com/Unidata/netcdf-c/issues/244
* Sun Jul 31 2016 virtuousfoxAATTgmail.com- Add 32bit version to satisfy libavfilter6-32bit
* Sun Jul 17 2016 jengelhAATTinai.de- Trim descriptions. (libnetcdf11 will be the prominently installed one and therefore retains it mostly.)
* Fri Jul 15 2016 toddrme2178AATTgmail.com- As far as I can find the settings file is only needed for development.
* Tue Jul 05 2016 adrianAATTsuse.de- update to version 4.4.1 Details can be found in the RELEASE_NOTES file.- Note: The combination of netCDF-C library versions earlier than 4.4.1 and libhdf5 1.10.0+ should be avoided, as they will result in binary files not readable by systems using earlier libhdf5 versions.
* Thu Mar 31 2016 dvaleevAATTsuse.com- Regenerate ncx.c from ncx.m4. Tarball doesn\'t have fresh copy of it. https://github.com/Unidata/netcdf-c/issues/159
* Wed Mar 16 2016 toddrme2178AATTgmail.com- Update to version 4.4.0. Highlights:
* Added CDM-5 support.
* Added support for opening in-memory file content.
* Modified CMakeLists.txt to work with the re-organized cmake configuration used by the latest HDF5, 1.8.16, on Windows. Before this fix, netCDF would fail to locate hdf5 1.8.16 when using cmake on Windows.
* Modified ncgen to properly handle the L and UL suffixes for integer constants to keep backward compatibility.- Remove netcdf-correct_casting.patch, rendered irrelevant by upstream change.- Remov upstream-included netcdf-codecleanup.patch and netcdf-pkgconfig.patch- Rebase netcdf-no_date_time.patch
* Sat Nov 21 2015 scorotAATTfree.fr- install netcdf_par.h which is skipped when mpicc in not detected
* Mon Aug 24 2015 toddrme2178AATTgmail.com- Currently the regular, openmpi, and mpivachi2 versions of the library packages all provide the exact same libraries. So any package built against the -devel package will end up with an \"unresolvable\" build error because there are multiple versions of the library it can use. To avoid this, I have added generic provides for the library package so packages can depend on the version they really need, avoiding these build issues.- Depend on the correct regular, openmpi, and mpivachi2 versions of hdf, hdf5, and parallel-netcdf.
* Mon Jul 27 2015 toddrme2178AATTgmail.com- Update subpackage groups- Make subpackage summaries and descriptions more consistent- Provide rpm macros for version identification- Spec file cleanups- Build parallel versions of the library.
* Fri Jul 24 2015 toddrme2178AATTgmail.com- Build with HDF4 support
* Sat Apr 18 2015 p.drouandAATTgmail.com- Update to version 4.3.3.1
* When the NC_MPIPOSIX flag is given for parallel I/O access and the HDF5 library does not have the MPI-POSIX VFD configured in, the NC_MPIPOSIX flag is transparently aliased to the NC_MPIIO flag within the netCDF-4 library.
* DAP requests now always include a restraint. Due to a problem in version 4.3.2, no constraint was generated when all variables were requested.
* Fixed the code for handling character constants in datalists in ncgen. Two of the problems were: - It failed on large constants - It did not handle e.g. - var = \'a\', \'b\', … in the same way that ncgen3 did.- Changes from version 4.3.3
* Fixed bug resulting in error closing a valid netCDF-4 file with a dimension and a non-coordinate variable with the same name. [NCF-324](https://bugtracking.unidata.ucar.edu/browse/NCF-324)
* Enabled previously-disabled shell-script-based tests for Visual Studio when `bash` is detected.- Update netcdf-no_date_time.patch