Changelog for ignition-dracut-0.0+git20200504.7ff38d9-bp152.1.1.x86_64.rpm :

* Mon May 11 2020 iforsterAATTsuse.com- Update to version 0.0+git20200504.7ff38d9:
* 30ignition: drop hard requirement on qemu_fw_cfg [boo#1167289]
* 99emergency-timeout: improve readability of Ignition failure message
* 99emergency-timeout: also check ignition-fetch.service for failure
* coreos-teardown-initramfs-network: don\'t run when emergency.target
* dracut: add logging to systemd generator
* coreos-teardown-initramfs-network: also propagate hostname
* coreos-teardown-initramfs-network: support coreos.no_persist_ip karg
* coreos-teardown-initramfs-network: consider ifcfg files in real root for RHCOS
* coreos-teardown-initramfs-network: also skip local loopback interface
* coreos-teardown-initramfs-network: do SELinux relabel on copied files
* coreos-teardown-initramfs-network: order ExecStop after other ignition units
* coreos-teardown-initramfs-network: remove After=ignition-files.service
* Add ignition-virtio-dump-journal.service
* Fri Mar 27 2020 iforsterAATTsuse.com- Update to version 0.0+git20200325.ea3bdc9:
* Add `basename` dependency to dracut module [boo#1167289]
* coreos-teardown-initramfs-network: enable the service statically
* coreos-teardown-initramfs-network: simplify networking takedown
* coreos-teardown-initramfs-network: take down routes too
* coreos-teardown-initramfs-network: take down teams as well
* coreos-teardown-initramfs-network: remove state files on switch
* coreos-teardown-initramfs-network: also propagate initramfs networking if desired
* coreos-teardown-initramfs-network: refactor into more functions
* add coreos-teardown-initramfs-network.service
* Declare external applications as optional [boo#1167289]
* Remove obsolete dependencies [boo#1167289]
* Hook up to CoreOS CI
* Add ignition-diskful-subsequent.target
* Makefile: Remove grub/ install bits
* grub: drop 02_ignition_firstboot- As the GRUB module was dropped upstream and is now generated as part of a CoreOS specific module, we will do the same:
* Move previous 02_ignition_firstboot to MicroOS dracut module
* Merge 0002-Support-different-flagfile-location.patch and 01_suse_set_ignition into custom 02_ignition_firstboot- Updated README.SUSE to describe all current SUSE modifications
* Wed Mar 04 2020 Ignaz Forster - Don\'t use new systemd RPM macros for compatibility with older releases.
* Thu Jan 09 2020 Ignaz Forster - Add prevent-boot-cycle.conf to prevent a systemd reboot cycle if the files stage should be failing; this is a temporary workaround until [gh#coreos/ignition-dracut#115] is fixed.
* Wed Jan 08 2020 iforsterAATTsuse.com- Update to version 0.0+git20200107.e490517:
* Make setfiles optional
* Sun Jan 05 2020 Thorsten Kukuk - Really increase timeout for \'ignition\' device on ARM
* Mon Dec 23 2019 Ignaz Forster - Update to version 0.0+git20191211.c4790bc:
* dracut: add some bins for s390x zVM instalation
* README.md: add details about the branches here
* units: add ConditionPathExists=/etc/initrd-release everywhere
* Add ConditionPathExists=/etc/initrd-release to targets
* 30ignition: add setfiles- Make package arch dependent to make the ARM fix actually apply
* Mon Nov 11 2019 kukukAATTsuse.de- Update to version 0.0+git20191107.d9e8a63:
* 30ignition/ignition-setup-user: mount /boot partition ro
* firstboot-complete: tell zipl to run
* coreos-gpt-setup: workaround old lsblk not having PTUUID
* Add `ignition-subsequent.target` for non-Ignition boots
* ignition-firstboot-complete.service: Run as part of basic.target- Increase timeout for \'ignition\' device on ARM- Prefer Ignition configuration if a mount point is both configured in Ignition and fstab (x-initrd.mount flag)- Explicitly add awk as initrd dependency
* Fri Oct 04 2019 Ignaz Forster - Fix missing executable permission for ignition-setup-user-suse.sh
* Wed Oct 02 2019 kukukAATTsuse.de- Update to version 0.0+git20191001.cefb71c:
* Run ignition-disks earlier to avoid race condition
* 30ignition: update ignition-complete.target OnFailure comment
* 30ignition: drop OnFailure handler from ignition-diskful.target
* 30ignition: fix sequencing of target dependencies- Don\'t error out in ignition-setup-user-suse.sh if Ignition device is not present
* Fri Sep 27 2019 kukukAATTsuse.de- Update to version 0.0+git20190924.aada644:
* dracut: Add an ignition-fetch.service
* Add RemainAfterExit=yes to systemd units of Type=oneshot
* Makefile: New file implementing `make install`
* 30ignition: move coreos-gpt-setup RemainAfterExit to correct section
* 30ignition: on live images, read config.ign from custom initrd
* 30ignition: make ignition-diskful a dependency of ignition-complete
* 30ignition: fix double slash in ignition-setup-
* dest paths- Drop 0001-Read-user-config.patch: Migrated to systemd drop-in files now that ignition-diskful is a separate target
* Tue Sep 17 2019 kukukAATTsuse.de- Update to version 0.0+git20190916.cbac371:
* systemd: don\'t try to mark live boots complete
* 30ignition: conditionally enable units requiring a boot disk
* README.md: fix download link
* update-bootengine: drop file
* dracut/30ignition: localize some variables
* ignition: fix correct device path when randomizing UUID- Fix path to rm binary in firstboot flag cleanup- Reorder $ignition_firstboot and ignition.platform.id in GRUB\'s kernel parameter line to be able to overwrite the later with values read from the flag file- Significantly decrease timeout for waiting for a device with the \'ignition\' UUID (storing an eventual user config) [boo#1151083]- Merge ignition-umount-initrd-fstab.service with ignition-mount-initrd-fstab.service, using the same stop mechanism as ignition-mount.service
* Wed Aug 14 2019 kukukAATTsuse.de- Update to version 0.0+git20190806.343b886:
* dracut/30ignition: fix typo in module_setup
* ignition: split ignition-setup into base and user
* dracut/30ignition: scramble disk uuid on 1st boot
* Thu Aug 01 2019 kukukAATTsuse.de- Update to version 0.0+git20190625.8551bc7:
* dracut: add 99emergency-timeout
* 30ignition: drop CoreOS specific bits
* Mon Apr 15 2019 kukukAATTsuse.de- Update to version 0.0+git20190405.85f2e65:
* dracut/30ignition: link to RHBZ in ignition-complete
* dracut/30ignition: add OnFailure= for ExecStop= services
* dracut/30ignition: order ExecStop= units before initrd-switch-root.target
* dracut/30ignition: re-order directives in remount-sysroot
* dracut/30ignition: add missing Before= for mount unit
* dracut/30ignition: order ignition-complete.target before initrd.target
* module_setup: include cdrom rules for openstack
* dracut: add CoreOS integration services
* dracut/30ignition: Add mount stage and drop OSTree-specific bits
* dracut/30ignition: Explicitly add OnFailure=emergency.target
* 30ignition: ignore coreos.randomize_disk_guid
* 30ignition: drop check for coreos.oem.id
* grub: support overriding network kcmdline args
* README.md: update documentation
* 02_ignition_firstboot: Enable networking if Ignition will run
* dracut/30ignition: expect ignition binary in module directory
* Mon Mar 18 2019 kukukAATTsuse.de- Update to version 0.0+git20190314.f6eb01f:
* dracut/30ignition: add ignition-complete.target
* dracut/30ignition: split out ignition-setup.service
* Tue Mar 12 2019 Ignaz Forster - Add GRUB firstboot variable support- Weaken hard dependencies to boot partition- Mount volumes flagged with \"x-initrd.mount\" before applying Ignition configuration; umount afterwards
* Sat Mar 09 2019 kukukAATTsuse.de- Update to version 0.0+git20190306.d4e8899:
* dracut/30ignition: Only write ignition-setup.service on first boot
* grub: find boot partition and use it directly
* module-setup.sh: Check for module qemu_fw_cfg not build-in, so it works out of box on all arches
* Mon Mar 04 2019 kukukAATTsuse.de- Update to version 0.0+git20190301.ca593a1:
* dracut/30ignition: general hack cleanups
* dracut: adapt for s/oem/platform in Ignition
* Tue Feb 19 2019 kukukAATTsuse.de- Update to version 0.0+git20190215.2c69925:
* ignition-setup: don\'t perform umount, rely on systemd
* ignition-setup: rename copy function
* services: fixup unit deps to more match CL
* ignition-setup: use MountFlags=slave for systemd unit
* ignition-setup: changes from code review
* ignition-setup: mount/unmount boot to grab user.ign
* dracut: add /usr/sbin/ignition-setup to initramfs
* generator: try to get ignition-setup to run on boot
* generator: RemainAfterExit=yes for ignition-setup
* ignition-setup: support boot or platform base/user configs
* ignition-setup: remove support for default configs
* Fri Feb 15 2019 kukukAATTsuse.de- Update to version 0.0+git20190207.9e18211:
* Remove the check for OEM partition, not used
* Always check for boot, needs to exist
* Replace OEM with boot
* Add ability to parse config.ign file on boot
* Wed Jan 30 2019 kukukAATTsuse.de- Update to version 0.0+git20190125.fa7131b:
* journal: add clarifying comment for context
* Wed Jan 09 2019 kukukAATTsuse.de- Update to version 0.0+git20190109.a6551f1:
* Remount /sysroot rw (#38)
* Wed Jan 09 2019 kukukAATTsuse.de- Update to version 0.0+git20190103.996d527:
* ignition-firstboot-complete.service: Remount /boot rw
* Sun Dec 23 2018 kukukAATTsuse.de- Remout /sysroot read-write for ignition-files.service
* Wed Dec 19 2018 kukukAATTsuse.de- Generate initrd after installation/update
* Wed Dec 12 2018 kukukAATTsuse.de- Update to version 0.0+git20181120.7b83454:
* Rename `coreos.firstboot` kernel cmdline arg to `ignition.firstboot` to make options more distribution neutral. Update dracut/README.txt to take into account recent changes.
* 30ignition: only instmods if module available
* remove ignition-remount-sysroot.service files
* ignition: run files stage at original CL ordering
* ignition-disks.service: drop Requires=network.target
* ignition-ask-var-mount.service: use RemainAfterExit=yes
* Wed Oct 17 2018 kukukAATTsuse.de- Update to version 0.0+git20181016.b7d4424:
* module-setup.sh: explicitly install qemu_fw_cfg
* Tue Oct 16 2018 kukukAATTsuse.de- Add requires for ignition and gptfdisk
* Tue Oct 16 2018 kukukAATTsuse.de- Initial version