Changelog for debhelper-13.11.4-bp155.1.5.noarch.rpm :

* Thu Jan 05 2023 Dirk Müller - update to 13.11.4:
* meson.pm: Pass --destdir to `meson install`. (Closes: #1027014)
* Dh_Lib.pm: Have addsubstvars check the value for newlines (Closes: #1026014)
* Stop using (fake)root for mkdirs again. Should have been removed as a part of the clean up in the previous upload but was overlooked causing breakage in packages still having `Rules-Requires-Root: binary-targets`. (Closes: #1026125)
* PROGRAMMING.md: Fix typos
* Dh_Lib.pm: Remove unused third parameter from install_dh_config_file
* makefile.pm: Provide hook for subclasses to reuse cross-build support
* Dh_Lib.pm: Revert change where `install_{file,prog,lib}` would use chown. The problem that prompted this change was not caused by debhelper but by fakeroot (#1024544) and the change in debhelper would not even function as a work around in this case. Accordingly, the extra complexity is not worth it and has been reverted.
* Dh_Lib.pm: Fix typo in warning message about dherroron
* Mon Dec 12 2022 Jan Baier - Update to version 13.11.1
* dh_installchangelogs: Ensure that at least four old entries are preserved (Closes: #1021467)
* meson.pm: Use `meson setup` in the configure step rather than just `meson`.
* Put newest compat level first in documentation
* Rename debhelper config files to include package name
* dh_installdebconf: Fix typo in manual page
* Dh_Lib.pm: `qx_cmd` support env/chdir changes like `doit` (Closes: #1016354)
* Remove obsolete compat checks in the code
* dh_dwz: Ensure dwz multifile is owned by root:root when root should be used
* dh_builddeb: Always pass `--root-owner-group` to `dpkg-deb` for dbgsym packages.
* Dh_Lib.pm: Provide `mkdirs` to create (non-package) directories.
* Dh_Lib.pm: Make `install_dir` chown created directories when root should be used for debhelper\'s own commands. This fixes #1024261 for packages that only use debhelper itself. However, third-party debhelper tools may still cause packages with incorrect ownership for now if they are run after `dh_fixperms` (or `dh_fixperms` is omitted).
* Dh_Lib.pm: Ensure `install_{file,prog,lib}` uses chown when root should be used. Previously, they would skip the `chown` call and rely on `dh_fixperms` or `dpkg-deb` to fix the ownership. However, that could cause issues when the helper was run after `dh_fixperms` and install files that `dpkg-deb` would not reset ownership of.
* Install `installsysusers` sequence (to match the provide).
* dh_installchangelogs: Trim old Debian changelog entries automatically. Distributions can disable this by using `DEB_BUILD_OPTIONS=notrimdch`.
* dh_installchangelogs.t: Force locale to be `C.UTF-8` to avoid generating invalid changelog entries under non-default locales.
* meson.pm: Stop providing `MESON_TESTTHREADS` environment variable for the install target. Said variable only applies for testing.
* cmake.pm: Use `cmake --install` in compat 14. (Closes: #1020732)
* docs/PROGRAMMING{,.md}: Rewrite PROGRAMMING into markdown.
* dh_installsystemduser: Stop masking user units on package removal. They should never have been masked in the first place. See #1021027.
* dh_installinit: Remove executable bit of init scripts on package removal (via preinst). Related to #1021027.
* dh_installsystemd: Stop masking system units on package removal. This is no longer necessary with the init scripts getting their exec bit cleared on package removal. (Closes: #1021027)
* Dh_Lib.pm: Add `package_type` as a function (extracted from `is_udeb`).
* Dh_Getopt.pm: Fix duplicated `warning` in output for a particular warning.
* dh_assistant: Provide a new `detect-hook-targets` command.
* dh: Recommend using `dh_assistant detect-hook-targets` for checking whether hook targets are correct.
* dh: Hoist `nodoc` and `nocheck` from `DEB_BUILD_PROFILES` into `DEB_BUILD_OPTIONS` when they are present in the former and absent in the latter. Emit a warning when doing so to aid the user, so they know why this does not work when they are later building a package that does not use dh. (Closes: #979401)
* dh: Provide a warning when cross building an `nocheck` is absent from `DEB_BUILD_OPTIONS` to cross builders, who are not experienced with Debian\'s requirements for cross-building. The warning also recommends activating the `cross` build profile and provides a way to disable the warning without using `nocheck` (for the special case, where people have a system that can run host binaries).
* Dh_Lib.pm: Fix bug where `addsubstvars` would not respect the `--no-act` parameter.
* dh_perl: For scripts that are detected as perl scripts that would trigger a dependency, normalize the shebang line to use the same perl as debhelper is run under (/usr/bin/perl in Debian, YMMV in derivatives). (Closes: #904409)
* dh_assistant: Provide new `log-installed-files` command to help users and third-party tools record which files they have installed. Third-party tools should use the `--on-behalf-of-cmd` to have their tool name recorded. (Closes: #972724)
* dh_installexamples: Explicitly recommend `examples/
*` over `examples` as content for the `debian/.examples` file to avoid the triggering `.../examples/examples` case. (Closes: #1000384)
* debhelper.pod: Clarify the documentation around `-v` + `--verbose` vs. `DH_VERBOSE` vs. `DH_QUIET` and `terse` from `DEB_BUILD_OPTIONS`. Notably, clarify that `-v` and `DH_VERBOSE` provides the same functionality and that they do not cause
*all
* commands to be shown. (Closes: #1002464)
* Update Portuguese translation (Américo Monteiro) (Closes: #1019231)
* autoscripts/postinst-init-tmpfiles: Re-instate runtime check before running `systemd-tmpfiles`. However, explicitly check for `systemd-tmpfiles` rather than asserting the system was booted by systemd. This resolves #1013969 without requiring a strict dependency as originally suggested by Guilhem Moulin in #1013969.
* dh_installtmpfiles: Remove the `systemd | systemd-tmpfiles` dependency as it is no longer required. (Closes: #1017441)
* dh_installsystemd: Ditto.
* dh_installinit: Ditto.
* autoscripts/postinst-init-tmpfiles: Only pass `--root` to systemd when `DPKG_ROOT` is present (as `--root=/` is different from omitting `--root` entirely).
* autoscripts/postinst-sysusers: Ditto
* Mon Aug 15 2022 Jan Baier - Update to version 13.9
* d/control: Provide dh-sequence-installsysusers.
* debhelper.pod: Add missing word \"variables\".
* Dh_Lib.pm: Fix in addsubstvar where a value was added when it should not have been. (Closes: #1015263)
* Thu Aug 04 2022 Jan Baier - Update to version 13.8
* dh_perl: Fix incorrect binary versioning caused by a regression in 13.3. Thanks to Niko Tyni for reporting the issue. (Closes: #997961)
* d/control: Bump Standards-Version to 4.6.1 - no changes required.
* root_sequence.pm: Run `dh_installsysusers` before `dh_installtmpfiles` (only affects compat 14 or later). Thanks to Nicholas Brown for the suggestion. (Closes: #1011099)
* autoscripts/postinst-init-tmpfiles: Remove runtime check on the system having systemd as init system.
* dh_installtmpfiles: Replace runtime check on the system running under systemd in generated `postinst` script with a dependency on `systemd | systemd-tmpfiles` added to `${misc:Depends}`. Thanks to Guilhem Moulin for the suggestion. (Closes: #1013969)
* dh_installsystemd: Ditto.
* dh_installinit: Ditto.
* debhelper-compat-upgrade-checklist.pod: Correct description for the addition of dh_installsysusers in compat 14.
* meson.pm: Use `meson install` instead of `ninja install` for dh_auto_install in compat 14. Thanks to Andrea Pappacoda for the suggestion. (Closes: #1006805)
* Dh_Lib.pm: Remove double semi-colon. (Closes: #1010591)
* Dh_Lib.pm: _strip_spaces now explicitly returns undef on undef argument. (Closes: #1010594)
* cmake.pm: Set FETCHCONTENT_FULLY_DISCONNECTED to true. This ensures that the `FetchContent` module does not attempt to use internet connection.
* debhelper-compat-upgrade-checklist.pod: Update documentation for compat 14 change. (Closes: #1011404)
* debhelper.pod: Correct link to the new upgrade checklist. (Closes: #1012777)
* dh_installman: Avoid false positive language detection on shared libs.
* Update Portuguese translation (Américo Monteiro) (Closes: #1011256)
* Mon May 02 2022 Jan Baier - Update to version 13.7.1
* debhelper.pod: Fix several typos. Thanks to Guillem Jover for pointing them out and proposing corrections.
* dh_installalternatives: Correct a file check that caused false-positive rejections of valid alternatives files. Thanks to Hiroyuki YAMAMORI for reporting the bug and providing an initial patch. (Closes: #1009844)
* Mon May 02 2022 Jan Baier - Update to version 13.7
* dh_installalternatives: Improve validation of alternative files to catch some \"obvious\" copy-waste mistakes.
* dh: Invoke dh_installalternatives after dh_link in compat 14 or later. Thanks to Colin Watson for the suggestion. (Closes: #1002800)
* cmake.pm: Drop -DCMAKE_SKIP_RPATH=on in compat v14. Thanks to Vagrant Cascadian for the suggestion and the investigative work on this topic. (Closes: #1004939)
* debhelper-compat-upgrade-checklist.pod: New file.
* debhelper.pod: Move list of supported compat levels and the related upgrade checklist into debhelper-compat-upgrade-checklist.pod. This means you now need `man 7 debhelper-compat-upgrade-checklist` to see the upgrade checklist.
* dh_installdebconf: Support -D/--define command line parameters (mirroring those from dh_installdeb).
* Dh_Lib.pm: Cope with \"?=\" as assignment operator in substvars files to be future proof with (possible) planned addition of \"optional substvars. At the moment, debhelper will still always use \"=\" when adding a substvar but it will now preserve \"?=\" operator if an existing substvar is modified.
* autoconf.pm: Add support for autotest test suites by passing the TESTSUITEFLAGS environment variable to `make test`.
* Rewrite handling of stop services to use the `preinst` when using - -no-restart-after-upgrade. This fixes a regression caused by the fix for #989155. (Closes: #994204)
* dh_installmenu: Respect DPKG_ROOT when checking for update-menus. Note this implementation assumes update-menus is present both inside and outside the chroot to activate. If it is absent on either side, the update-menus call is skipped.
* dh_installsysusers: Invoke systemd-sysusers even when DPKG_ROOT is set (relying on `--root`).
* dh_installpam: In compat 14, install pam snippets into `/usr/lib/pam.d` instead of `/etc/pam.d`. Remember to remove (now) obsolete conffiles when you bump to compat 14.
* debhelper.pod: Correct spelling of DEB_BUILD_MAINT_OPTIONS.
* Mon Jan 03 2022 Jan Baier - Update to version 13.6
* dh_assistant: Avoid creating `debian/.debhelper` when the which-build-system sub command is invoked. Thanks to Jelmer Vernooij for spotting that bug.
* dh_assistant: Add new active-compat-level command, which outputs information about which compat level is declared and active. It also tells how the compat level was declared.
* Dh_Lib.pm: Add new function, get_non_binnmu_date_epoch, only needed for dh_strip_nondeterminism.
* dh_installcron: Add support for `cron.yearly` packaging file. Thanks to Martin-Éric Racine for the suggestion. (Closes: #1000363)
* Dh_Lib.pm: Remove support for compat 5 and 6.
* debhelper.pod,debhelper-obsolete-compat.pod: Update to reflect the new status for compat 5 and 6.
* dh: Add missing _ in execute_after example in POD.
* dh_compress: Exclude .woff and .woff2 by default.
* Update Portuguese translation (Américo Monteiro) (Closes: #1000719)
* Mon Oct 18 2021 Jan Baier - Update to version 13.5.2
* dh_installsystemd: Revert change to deploy systemd files into usr/lib/systemd. (Closes: #993316, #993759)
* dh_installinit: Ditto.
* dh_systemd_enable: Ditto.
* dh_systemd_start: Ditto.
* SequencerUtil.pm: Remove duplicate \"-a\" option to some commands. Thanks to Christoph Berg for reporting the issue. (Closes: #971761)
* dh_installdeb: Revert the change to rewrite `rm_conffiles` into `remove-on-upgrade` due to it causing bugs in non-trivial cases. (Closes: #994919)
* dh_installtmpfiles: Add missing option name in POD documentation.
* cmake.pm: make it possible to override dh provided ctest arguments
* cmake.pm: Add missing import which broke cmake related builds. Thanks to Boyuan Yang for reporting the issue. (Closes: #993345)
* dh_installdeb: Install debian/conffiles in compat 12+ again (undoing the compat 12 change saying dh_installdeb would ignore this file). The file can now be using for the activating the `remove-on-upgrade` feature from dpkg 1.20.
* dh_installdeb: Automatically rewrite `rm_conffiles` into the new `remove-on-upgrade` feature from dpkg when possible.
* cmake.pm: Pass `ARGS+=--verbose` to make when running tests in the cmake+make variant except when \"terse\" is in DEB_BUILD_OPTIONS. Thanks to Paul Wise for the suggestion. (Closes: #992623)
* python_support.pm: Remove obsolete dh addon. It did nothing but warn and nothing used it anymore.
* dh: Document debhelper provided dh addon sequences.
* single_binary.pm: New dh addon (\"single-binary\") that explicitly activates the \"single binary\" work flow, where dh_auto_install uses debian/ as default --destdir when there is only a single binary package. It will error out if used in a source package building multiple binary packages.
* dh: Activate \"single-binary\" addon by default in compat levels up to and including compat 14 when the source package only lists one binary package in debian/control. In compat 14, emit a warning when this happens implicitly requesting users to explicitly enable or disable the addon for single binary source packages to avoid surprises in compat 15.
* dh_auto_install: In compat 15, remove special-case default for - -destdir for single binary source packages. If the previous default is desired, please use the \"single-binary\" dh addon or explicitly pass --destdir to dh_auto_install. (Closes: #971432)
* debian/control: Provide dh-sequence-single-binary.
* debhelper.pod: Document the dh_auto_install will change behaviour in compat 15 for single binary packages and dh will warning about that in compat 14.
* dh_assistant: New tool for assisting third-party tools. At the moment, it primarily supports introspection related features but will hopefully be extended to support more use cases. (Closes: #984900)
* Mon Oct 18 2021 Jan Baier - Update to version 13.4.1
* autoscripts/
*: Replace `which` with `command -v`.
* dh_installsystemd: Only merge /lib/systemd/system into /usr for now. (Closes: #992554)
* dh_systemd_enable: Ditto.
* autoscripts/postinst-init-nostart: Call invoke-rc.d when a non-empty DPKG_ROOT is used. (Closes: #992556)
* Replace \"use v5.28\" with \"use v5.24\" in Dh_Lib.pm. The change to \"use v5.28\" in 13.4 broke the test to distinguish 0755 from \"0755\" in the reset_perm_and_owner function, breaking builds. Thanks Adrian Bunk and Ansgar for help isolating the problem.
* debian/changelog: Correct bug number in the 13.4 entry.
* dh_dwz: run in parallel across packages. (Closes: !47)
* Dh_Buildsystems.pm: Add bmake and mkcmake as third-party build systems. (Closes: !46)
* Dh_Buildsystems.pm: Add golang as a third-party build system. (Closes: #981106)
* autoscripts/
*: Add support for DPKG_ROOT in systemd, tmpusers, sysusers and init related snippets. Based on an initial patch from Helmut Grohne. (Closes: #983566)
* autoscripts/
*: Reorder conditions in some scripts to avoid doing a redundant stat call when a script parameter can decide to skip it.
* dh_gconf: Remove the command as it does nothing. (Closes: #908845)
* doc/TODO: Remove reference to dh_gconf.
* root_sequence.pm: Remove dh_gconf from root sequence and declare it as obsolete (causing errors from compat 14 if still referenced in hook targets).
* man/po4a/po4a.cfg: Remove dh_gconf from translations.
* AddonAPI.pm: The declare_command_obsolete command now accepts an \"$error_compat\" parameter to enable addons to choose which compat level that will trigger an error (though it must be minimum 13).
* doc/PROGRAMMING: Update docs to reflect API change.
* debhelper.pod: Document that referencing dh_gconf in hook targets will cause an error in compat 14.
* dh_fixperms: Correct permissions of files beneath usr/libexec to be executable. (Closes: #979401)
* dh_installtmpfiles: Only register tmpfiles ending with \".conf\" as tmpfiles in /usr/lib/tmpfiles.d and /etc/tmpfiles.d. This ensures that dh_installtmpfiles gracefully copes with e.g. README files provided by systemd upstream. (Closes: #986329)
* dh_installsystemd: Ditto (but only relevant in compat 12 or earlier)
* cmake.pm: Pass -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF to cmake in addition to -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON as the former is intended to replace the latter. Thanks to Raul Tambre for reporting the issue. (Closes: #988973)
* Dh_Lib.pm: Bump version requirement to v5.28 to reflect the actual requirements (the code was using v5.28 features). Thanks to Sérgio Basto for reporting the issue.
* dh_missing: Ditto.
* autoscripts/postinst-init,autoscripts/postinst-systemd-start: Use \"restart\" instead of \"start\" when starting the services. This ensures a smooth transition from --restart-after-upgrade to - -no-restart-after-upgrade in dh_installinit and dh_installsystemd. Thanks to Ryan Tandy for reporting the issue. (Closes: #989155)
* dh_installsystemd: Remove usage of autoscripts/postinst-systemd-restart
* dh_installinit: Remove usage of autoscripts/postinst-init-restart
* autoscripts/autoscripts/postinst-systemd-restart: Removed.
* autoscripts/postinst-init-restart: Removed
* dh_installsystemd: Prefer /usr/lib/systemd/ to /lib/systemd. (Closes: #987989)
* dh_systemd_enable: Ditto.
* dh_systemd_start: Ditto.
* dh_installinit: Ditto.
* dh_installsystemd: Merge /lib/systemd into /usr/lib/systemd if both are present in the package staging directory (prefering the latter in case of conflicts). (Closes: #987989)
* dh_systemd_enable: Ditto.
* perl_build.pm,perl_makemaker.pm: Make debhelper use the same perl as it runs under (via Perl\'s $^X variable) when invoking the upstream build system. (Closes: !40, #966396)
* Always generate unique doc-base file names based on package name and document ID. (Closes: #980903)
* Tue Mar 16 2021 Jan Baier - Update to version 13.3.4- Adapt patches to new upstream version:
* remove debhelper-9.20150101-no-localized-manpages.patch
* add debhelper-no-localized-manpages.patch
* Sun Jul 24 2016 p.drouandAATTgmail.com- Update to version 9.20160709
* Sun Jan 04 2015 p.drouandAATTgmail.com- Update to version 9.20150101- Adapt debhelper-no-localized-manpages.patch to upstream changes
* debhelper-9.20150101-no-localized-manpages.patch- Remove upstreamed debhelper-findutils.patch