Changelog for bind-doc-9.9.3P2-1.1.noarch.rpm :

* Wed Aug 07 2013 maxAATTsuse.com- Update to 9.9.3P2 fixes CVE-2013-4854, bnc#831899.
* Incorrect bounds checking on private type \'keydata\' can lead to a remotely triggerable REQUIRE failure.
* Tue Mar 26 2013 lmuelleAATTsuse.com- Updated to 9.9.2-P2 Security Fixes Removed the check for regex.h in configure in order to disable regex syntax checking, as it exposes BIND to a critical flaw in libregex on some platforms. [CVE-2013-2266] [RT #32688] https://kb.isc.org/article/AA-00871 (bnc#811876) Prevents named from aborting with a require assertion failure on servers with DNS64 enabled. These crashes might occur as a result of specific queries that are received. (Note that this fix is a subset of a series of updates that will be included in full in BIND 9.8.5 and 9.9.3 as change #3388, RT #30996). [CVE-2012-5688] [RT #30792] A deliberately constructed combination of records could cause named to hang while populating the additional section of a response. [CVE-2012-5166] [RT #31090] Prevents a named assert (crash) when queried for a record whose RDATA exceeds 65535 bytes. [CVE-2012-4244] [RT #30416] Prevents a named assert (crash) when validating caused by using \"Bad cache\" data before it has been initialized. [CVE-2012-3817] [RT #30025] A condition has been corrected where improper handling of zero-length RDATA could cause undesirable behavior, including termination of the named process. [CVE-2012-1667] [RT #29644] ISC_QUEUE handling for recursive clients was updated to address a race condition that could cause a memory leak. This rarely occurred with UDP clients, but could be a significant problem for a server handling a steady rate of TCP queries. [CVE-2012-3868] [RT #29539 & #30233] New Features Elliptic Curve Digital Signature Algorithm keys and signatures in DNSSEC are now supported per RFC 6605. [RT #21918] Introduces a new tool \"dnssec-checkds\" command that checks a zone to determine which DS records should be published in the parent zone, or which DLV records should be published in a DLV zone, and queries the DNS to ensure that it exists. (Note: This tool depends on python; it will not be built or installed on systems that do not have a python interpreter.) [RT #28099] Introduces a new tool \"dnssec-verify\" that validates a signed zone, checking for the correctness of signatures and NSEC/NSEC3 chains. [RT #23673] Adds configuration option \"max-rsa-exponent-size ;\" that can be used to specify the maximum rsa exponent size that will be accepted when validating [RT #29228] Feature Changes Improves OpenSSL error logging [RT #29932] nslookup now returns a nonzero exit code when it is unable to get an answer. [RT #29492] Bug Fixes When using DNSSEC inline signing with \"rndc signing -nsec3param\", a salt value of \"-\" can now be used to indicate \'no salt\'. [RT #30099] Prevents race conditions (address use after free) that could be encountered when named is shutting down and releasing structures used to manage recursive clients. [RT #30241] Static-stub zones now accept \"forward\" and \"fowarders\" options (often needed for subdomains of the zone referenced to override global forwarding options). These options are already available with traditional stub zones and their omission from zones of type \"static-stub\" was an inadvertent oversight. [RT #30482] Limits the TTL of signed RRsets in cache when their RRSIGs are approaching expiry. This prevents the persistence in cache of invalid RRSIGs in order to assist recovery from a situation where zone re-signing doesn\'t occur in a timely manner. With this change, named will attempt to obtain new RRSIGs from the authoritative server once the original ones have expired, and even if the TTL of the old records would in other circumstances cause them to be kept in cache for longer. [RT #26429] Corrects the syntax of isc_atomic_xadd() and isc_atomic_cmpxchg() which are employed on Itanium systems to speed up lock management by making use of atomic operations. Without the syntax correction it is possible that concurrent access to the same structures could accidentally occur with unpredictable results. [RT #25181] Improves OpenSSL error logging [RT #29932] The configure script now supports and detects libxml2-2.8.x correctly [RT #30440] The host command should no longer assert on some architectures and builds while handling the time values used with the -w (wait forever) option. [RT #18723] Invalid zero settings for max-retry-time, min-retry-time, max-refresh-time, min-refresh-time will now be detected during parsing of named.conf and an error emitted instead of triggering an assertion failure on startup. [RT #27730] Removes spurious newlines from log messages in zone.c [RT #30675] When built with readline support (i.e. on a system with readline installed) nsupdate no longer terminates unexpectedly in interactive mode. [RT #29550] All named tasks that perform task-exclusive operations now share the same single task. Prior to this change, there was the possibility of a race condition between rndc operations and other functions such as re-sizing the adb hash table. If the race condition was encountered, named would in most cases terminate unexpectedly with an assert. [RT #29872] Ensures that servers are expired from the ADB cache when the timeout limit is reached so that their learned attributes can be refreshed. Prior to this change, servers that were frequently queried might never have their entries removed and reinitialized. This is of particular importance to DNSSEC-validating recursive servers that might erroneously set \"no-edns\" for an authoritative server following a period of intermittent connectivity. [RT [#29856]] Adds additional resilience to a previous security change (3218) by preventing RRSIG data from being added to cache when a pseudo-record matching the covering type and proving non-existence exists at a higher trust level. The earlier change prevented this inconsistent data from being retrieved from cache in response to client queries - with this additional change, the RRSIG records are no longer inserted into cache at all. [RT #26809] dnssec-settime will now issue a warning when the writing of a new private key file would cause a change in the permissions of the existing file. [RT #27724] Fixes the defect introduced by change #3314 that was causing failures when saving stub zones to disk (resulting in excessive CPU usage in some cases). [RT #29952] Address race condition in units tests: asyncload_zone and asyncload_zt. [RT #26100] It is now possible to using multiple control keys again - this functionality was inadvertently broken by change #3924 (RT #28265) which addressed a memory leak. [RT #29694] Named now holds a zone table reference while performing an asynchronous load of a zone. This removes a race condition that could cause named to crash when zones are added using rndc addzone or by manually editing named\'s configuration file followed by rndc reconfig/reload. [RT #28326] Setting resolver-query-timeout too low could cause named problems recovering after a loss of connectivity. [RT #29623] Reduces the potential build-up of stale RRsets in cache on a busy recursive nameserver by re-using cached DS and RRSIG rrsets when possible [RT #29446] Corrects a failure to authenticate non-existence of resource records in some circumstances when RPZ has been configured. Also: - adds an optional \"recursive-only yes|no\" to the response-policy statement - adds an optional \"max-policy-ttl\" to the response-policy statement to limit the false data that \"recursive-only no\" can introduce into resolvers\' caches - introduces a predefined encoding of PASSTHRU policy by adding \"rpz-passthru\" to be used as the target of CNAME policy records (the old encoding is still accepted.) - adds a RPZ performance test to bin/tests/system/rpz when queryperf is available. [RT #26172] Upper-case/lower-case handling of RRSIG signer-names is now handled consistently: RRSIG records are generated with the signer-name in lower case. They are accepted with any case, but if they fail to validate, we try again in lower case. [RT #27451]
* Tue Mar 26 2013 lmuelleAATTsuse.com- Update the IPv4 address of the D root name server.
* Thu Dec 06 2012 meissnerAATTsuse.com- Updated to 9.9.2-P1 (bnc#792926) https://kb.isc.org/article/AA-00828
* Security Fixes Prevents named from aborting with a require assertion failure on servers with DNS64 enabled. These crashes might occur as a result of specific queries that are received. (Note that this fix is a subset of a series of updates that will be included in full in BIND 9.8.5 and 9.9.3 as change #3388, RT #30996). [CVE-2012-5688] [RT #30792] A deliberately constructed combination of records could cause named to hang while populating the additional section of a response. [CVE-2012-5166] [RT #31090] Prevents a named assert (crash) when queried for a record whose RDATA exceeds 65535 bytes. [CVE-2012-4244] [RT #30416] Prevents a named assert (crash) when validating caused by using \"Bad cache\" data before it has been initialized. [CVE-2012-3817] [RT #30025] A condition has been corrected where improper handling of zero-length RDATA could cause undesirable behavior, including termination of the named process. [CVE-2012-1667] [RT #29644] ISC_QUEUE handling for recursive clients was updated to address a race condition that could cause a memory leak. This rarely occurred with UDP clients, but could be a significant problem for a server handling a steady rate of TCP queries. [CVE-2012-3868] [RT #29539 & #30233] New Features Elliptic Curve Digital Signature Algorithm keys and signatures in DNSSEC are now supported per RFC 6605. [RT #21918] Introduces a new tool \"dnssec-checkds\" command that checks a zone to determine which DS records should be published in the parent zone, or which DLV records should be published in a DLV zone, and queries the DNS to ensure that it exists. (Note: This tool depends on python; it will not be built or installed on systems that do not have a python interpreter.) [RT #28099] Introduces a new tool \"dnssec-verify\" that validates a signed zone, checking for the correctness of signatures and NSEC/NSEC3 chains. [RT #23673] Adds configuration option \"max-rsa-exponent-size ;\" that can be used to specify the maximum rsa exponent size that will be accepted when validating [RT #29228] Feature Changes Improves OpenSSL error logging [RT #29932] nslookup now returns a nonzero exit code when it is unable to get an answer. [RT #29492] Bug Fixes Uses binary mode to open raw files on Windows. [RT #30944] When using DNSSEC inline signing with \"rndc signing -nsec3param\", a salt value of \"-\" can now be used to indicate \'no salt\'. [RT #30099] Prevents race conditions (address use after free) that could be encountered when named is shutting down and releasing structures used to manage recursive clients. [RT #30241] Static-stub zones now accept \"forward\" and \"fowarders\" options (often needed for subdomains of the zone referenced to override global forwarding options). These options are already available with traditional stub zones and their omission from zones of type \"static-stub\" was an inadvertent oversight. [RT #30482] Limits the TTL of signed RRsets in cache when their RRSIGs are approaching expiry. This prevents the persistence in cache of invalid RRSIGs in order to assist recovery from a situation where zone re-signing doesn\'t occur in a timely manner. With this change, named will attempt to obtain new RRSIGs from the authoritative server once the original ones have expired, and even if the TTL of the old records would in other circumstances cause them to be kept in cache for longer. [RT #26429] Corrects the syntax of isc_atomic_xadd() and isc_atomic_cmpxchg() which are employed on Itanium systems to speed up lock management by making use of atomic operations. Without the syntax correction it is possible that concurrent access to the same structures could accidentally occur with unpredictable results. [RT #25181] Improves OpenSSL error logging [RT #29932] The configure script now supports and detects libxml2-2.8.x correctly [RT #30440] The host command should no longer assert on some architectures and builds while handling the time values used with the -w (wait forever) option. [RT #18723] Invalid zero settings for max-retry-time, min-retry-time, max-refresh-time, min-refresh-time will now be detected during parsing of named.conf and an error emitted instead of triggering an assertion failure on startup. [RT #27730] Removes spurious newlines from log messages in zone.c [RT #30675] When built with readline support (i.e. on a system with readline installed) nsupdate no longer terminates unexpectedly in interactive mode. [RT #29550] All named tasks that perform task-exclusive operations now share the same single task. Prior to this change, there was the possibility of a race condition between rndc operations and other functions such as re-sizing the adb hash table. If the race condition was encountered, named would in most cases terminate unexpectedly with an assert. [RT #29872] Ensures that servers are expired from the ADB cache when the timeout limit is reached so that their learned attributes can be refreshed. Prior to this change, servers that were frequently queried might never have their entries removed and reinitialized. This is of particular importance to DNSSEC-validating recursive servers that might erroneously set \"no-edns\" for an authoritative server following a period of intermittent connectivity. [RT #29856] Adds additional resilience to a previous security change (3218) by preventing RRSIG data from being added to cache when a pseudo-record matching the covering type and proving non-existence exists at a higher trust level. The earlier change prevented this inconsistent data from being retrieved from cache in response to client queries - with this additional change, the RRSIG records are no longer inserted into cache at all. [RT #26809] dnssec-settime will now issue a warning when the writing of a new private key file would cause a change in the permissions of the existing file. [RT #27724] Fixes the defect introduced by change #3314 that was causing failures when saving stub zones to disk (resulting in excessive CPU usage in some cases). [RT #29952] Address race condition in units tests: asyncload_zone and asyncload_zt. [RT #26100] It is now possible to using multiple control keys again - this functionality was inadvertently broken by change #3924 (RT #28265) which addressed a memory leak. [RT #29694] Named now holds a zone table reference while performing an asynchronous load of a zone. This removes a race condition that could cause named to crash when zones are added using rndc addzone or by manually editing named\'s configuration file followed by rndc reconfig/reload. [RT #28326] Setting resolver-query-timeout too low could cause named problems recovering after a loss of connectivity. [RT #29623] Reduces the potential build-up of stale RRsets in cache on a busy recursive nameserver by re-using cached DS and RRSIG rrsets when possible [RT #29446] Corrects a failure to authenticate non-existence of resource records in some circumstances when RPZ has been configured. Also: adds an optional \"recursive-only yes|no\" to the response-policy statement adds an optional \"max-policy-ttl\" to the response-policy statement to limit the false data that \"recursive-only no\" can introduce into resolvers\' caches introduces a predefined encoding of PASSTHRU policy by adding \"rpz-passthru\" to be used as the target of CNAME policy records (the old encoding is still accepted.) adds a RPZ performance test to bin/tests/system/rpz when queryperf is available. [RT #26172] Upper-case/lower-case handling of RRSIG signer-names is now handled consistently: RRSIG records are generated with the signer-name in lower case. They are accepted with any case, but if they fail to validate, we try again in lower case. [RT #27451]
* Sun Nov 18 2012 meissnerAATTsuse.com- added a ratelimiting (draft RFC) patch from Paul Vixie. see http://www.redbarn.org/dns/ratelimits suggested by Stefan Schaefer
* Wed Nov 14 2012 meissnerAATTsuse.com- updated to 9.9.2 https://kb.isc.org/article/AA-00798 Security:
* A deliberately constructed combination of records could cause named to hang while populating the additional section of a response. [CVE-2012-5166] [RT #31090]
* Prevents a named assert (crash) when queried for a record whose RDATA exceeds 65535 bytes. [CVE-2012-4244] [RT #30416]
* Prevents a named assert (crash) when validating caused by using \"Bad cache\" data before it has been initialized. [CVE-2012-3817] [RT #30025]
* A condition has been corrected where improper handling of zero-length RDATA could cause undesirable behavior, including termination of the named process. [CVE-2012-1667] [RT #29644]
* ISC_QUEUE handling for recursive clients was updated to address a race condition that could cause a memory leak. This rarely occurred with UDP clients, but could be a significant problem for a server handling a steady rate of TCP queries. [CVE-2012-3868] [RT #29539 & #30233] New Features
* Elliptic Curve Digital Signature Algorithm keys and signatures in DNSSEC are now supported per RFC 6605. [RT #21918]
* Introduces a new tool \"dnssec-checkds\" command that checks a zone to determine which DS records should be published in the parent zone, or which DLV records should be published in a DLV zone, and queries the DNS to ensure that it exists. (Note: This tool depends on python; it will not be built or installed on systems that do not have a python interpreter.) [RT #28099]
* Introduces a new tool \"dnssec-verify\" that validates a signed zone, checking for the correctness of signatures and NSEC/NSEC3 chains. [RT #23673]
* Adds configuration option \"max-rsa-exponent-size ;\" that can be used to specify the maximum rsa exponent size that will be accepted when validating [RT #29228] Feature Changes
* Improves OpenSSL error logging [RT #29932]
* nslookup now returns a nonzero exit code when it is unable to get an answer. [RT #29492] Lots of bugfixes.- unfuzzed patches: perl-path.diff pie_compile.diff workaround-compile-problem.diff
* Sun Oct 21 2012 lijewski.stefanAATTzabka.pl- Specially crafted DNS data can cause a lockup in named. CVE-2012-5166, bnc#784602.- 9.7.6-P4
* Thu Sep 20 2012 lijewski.stefanAATTzabka.pl- A nameserver can be caused to exit with a REQUIRE exception if it can be induced to load a specially crafted resource record. CVE-2012-4244 bnc#780157- 9.6-ESV-R7-P3- fetched current named.root and dnszone-schema.txt from upstream. - named.root: D has ipv6 record now
* Mon Jul 30 2012 ugAATTsuse.de- Bad-cache data could be used before it was initialized, causing an assert. CVE-2012-3817 bnc#772945- Change #3314 broke saving of stub zones to disk resulting in excessive cpu usage in some cases.- 9.7.6-P2
* Tue Jul 03 2012 ugAATTsuse.de- VUL-1: deleted domain name resolving flaw CVE-2012-1033 bnc#746074- more than 40 other bugs fixed (see CHANGES for details)- 9.7.6-P1
* Mon Jun 04 2012 ugAATTsuse.de- VUL-0: bind remote DoS via zero length rdata field CVE-2012-1667 bnc#765315
* Thu Nov 17 2011 ugAATTsuse.de- Cache lookup could return RRSIG data associated with nonexistent records, leading to an assertion failure. (bnc#730995) CVE-2011-4313
* Tue Jul 05 2011 ugAATTsuse.de- Change #2912 (see CHANGES) exposed a latent bug in the DNS message processing code that could allow certain UPDATE requests to crash named. This was fixed by disambiguating internal database representation vs DNS wire format data. [RT #24777] [CVE-2011-2464] (bnc#703907)
* Tue May 31 2011 meissnerAATTsuse.de- Security update to 9.7.3-P1 - fixed a denial of service in RRSIG (CVE-2011-1910 / bnc#696585)- Updated named.root from internic
* Thu Feb 24 2011 ugAATTsuse.de- fixed security issue VUL-0: bind: IXFR or DDNS update combined with high query rate DoS vulnerability (CVE-2011-0414 bnc#674431)- version to 9.7.3
* Wed Jan 05 2011 meissnerAATTsuse.de- ifdef the sysvinit specific prereqs for openSUSE 11.4 and later
* Thu Dec 09 2010 mvyskocilAATTsuse.cz- fix bnc#656509 - direct mount of /proc in chroot
* Tue Dec 07 2010 cooloAATTnovell.com- prereq init scripts syslog and network
* Thu Dec 02 2010 ugAATTsuse.de- fixed VUL-0: bind: Key algorithm rollover bug bnc#657102, CVE-2010-3614- fixed VUL-0: bind: allow-query processed incorrectly bnc#657120, CVE-2010-3615- fixed VUL-0: bind: cache incorrectly allows a ncache entry and a rrsig for the same type bnc#657129, CVE-2010-3613
* Tue Nov 23 2010 ugAATTsuse.de- fixed return code of \"rcnamed status\"- added gssapi support
* Tue Oct 12 2010 ugAATTsuse.de- Zones may be dynamically added and removed with the \"rndc addzone\" and \"rndc delzone\" commands. These dynamically added zones are written to a per-view configuration file. Do not rely on the configuration file name nor contents as this will change in a future release. This is an experimental feature at this time.- Added new \"filter-aaaa-on-v4\" access control list to select which IPv4 clients have AAAA record filtering applied.- A new command \"rndc secroots\" was added to dump a combined summary of the currently managed keys combined with statically configured trust anchors.- Added support to load new keys into managed zones without signing immediately with \"rndc loadkeys\". Added support to link keys with \"dnssec-keygen -S\" and \"dnssec-settime -S\".- Documentation improvements- ORCHID prefixes were removed from the automatic empty zone list.- Improved handling of GSSAPI security contexts. Specifically, better memory management of cached contexts, limited lifetime of a context to 1 hour, and added a \"realm\" command to nsupdate to allow selection of a non-default realm name.- The contributed tool \"ztk\" was updated to version 1.0.- version 9.7.1 to 9.7.2-P2
* Mon Jul 26 2010 ugAATTsuse.de- chrooted bind failed to start (bnc#625019)
* Mon Jun 21 2010 ugAATTsuse.de- genrandom: add support for the generation of multiple files.- Update empty-zones list to match draft-ietf-dnsop-default-local-zones-13.- Incrementally write the master file after performing a AXFR.- Add AAAA address for L.ROOT-SERVERS.NET.- around 50 bugs fixed (see CHANGELOG for details)- version 9.7.1
* Thu May 20 2010 ugAATTsuse.de- Handle broken DNSSEC trust chains better. [RT #15619]- Named could return SERVFAIL for negative responses from unsigned zones. [RT #21131- version 9.7.0-P2
* Sat May 01 2010 ajAATTsuse.de- Handle /var/run on tmpfs.- do not use run_ldconfig.
* Wed Feb 24 2010 jengelhAATTmedozas.de- Enable DLZ-LDAP (supersedes sdb_ldap) and add a patch
* Wed Feb 17 2010 ugAATTsuse.de- Fully automatic signing of zones by \"named\".- Simplified configuration of DNSSEC Lookaside Validation (DLV).- Simplified configuration of Dynamic DNS, using the \"ddns-confgen\" command line tool or the \"local\" update-policy option. (As a side effect, this also makes it easier to configure automatic zone re-signing.)- New named option \"attach-cache\" that allows multiple views to share a single cache.- DNS rebinding attack prevention.- New default values for dnssec-keygen parameters.- Support for RFC 5011 automated trust anchor maintenance- Smart signing: simplified tools for zone signing and key maintenance.- The \"statistics-channels\" option is now available on Windows.- A new DNSSEC-aware libdns API for use by non-BIND9 applications- On some platforms, named and other binaries can now print out a stack backtrace on assertion failure, to aid in debugging.- A \"tools only\" installation mode on Windows, which only installs dig, host, nslookup and nsupdate.- Improved PKCS#11 support, including Keyper support and explicit OpenSSL engine selection.- version 9.7.0
* Wed Jan 20 2010 ugAATTsuse.de- [security] Do not attempt to validate or cache out-of-bailiwick data returned with a secure answer; it must be re-fetched from its original source and validated in that context. [RT #20819]- [security] Cached CNAME or DNAME RR could be returned to clients without DNSSEC validation. [RT #20737]- [security] Bogus NXDOMAIN could be cached as if valid. [RT #20712]- version 9.6.1-P3
* Mon Jan 04 2010 ugAATTsuse.de- removed the syntax check for include files (bnc#567593)
* Tue Dec 15 2009 jengelhAATTmedozas.de- add baselibs.conf as a source- enable parallel building- add baselibs for SPARC- package documentation as noarch
* Wed Nov 25 2009 ugAATTsuse.de- Security fix When validating, track whether pending data was from the additional section or not and only return it if validates as secure. [RT #20438] CVE-2009-4022 bnc#558260- update from P1 to P2
* Fri Nov 20 2009 ugAATTsuse.de- added localhost for ipv6 to default config (bnc#539529)
* Wed Nov 18 2009 ugAATTsuse.de- fixed apparmor profile (bnc#544181)
* Tue Nov 03 2009 cooloAATTnovell.com- updated patches to apply with fuzz=0
* Wed Sep 30 2009 ugAATTsuse.de- using start_daemon instead of startproc (bnc#539532)
* Mon Aug 10 2009 ugAATTsuse.de- version update to 9.6.1-P1 (security fix CVE-2009-0696) bnc#526185
* Tue Jun 30 2009 ugAATTsuse.de- enabled MySQL DLZ (Dynamically Loadable Zones)
* Tue Jun 16 2009 ugAATTsuse.de- around 50 bugfixes against 9.6.0p1 See changelog for details- version 9.6.1
* Thu Apr 09 2009 ugAATTsuse.de- not all include files were copied into chroot (bnc#466800)
* Tue Mar 03 2009 ugAATTsuse.de- /etc/named.conf does not include /etc/named.d/forwarders.conf by default (bnc#480334)
* Wed Feb 18 2009 ugAATTsuse.de- mount /proc into chroot environment to support multi CPU systems (bnc#470828)
* Wed Jan 28 2009 ugAATTsuse.de- key names with spaces are allowed by genDDNSkey now (bnc#459739)- a missing /etc/named.conf.include could lead to an error while \"restart\" (bnc#455888)- version update to 9.6.0-P1- Full NSEC3 support- Automatic zone re-signing- New update-policy methods tcp-self and 6to4-self- The BIND 8 resolver library, libbind, has been removed from the BIND 9 distribution
* Wed Dec 10 2008 olhAATTsuse.de- use Obsoletes: -XXbit only for ppc64 to help solver during distupgrade (bnc#437293)
* Wed Nov 26 2008 ugAATTsuse.de- fix for removed /etc/named.d directory (bnc#448995)
* Tue Nov 11 2008 roAATTsuse.de- SLE-11 uses PPC64 instead of PPC, adapt baselibs.conf
* Thu Oct 30 2008 olhAATTsuse.de- obsolete old -XXbit packages (bnc#437293)
* Wed Oct 01 2008 ugAATTsuse.de- should start/stop fixed (bnc#430901)
* Fri Sep 05 2008 mrueckertAATTsuse.de- delete the static libraries aswell- added missiong requires to the baselibs.conf
* Mon Sep 01 2008 sschoberAATTsuse.de- Create and copy /etc/named.conf.include to change root jail. Fix by Frank Hollmann.
* Mon Aug 18 2008 ugAATTsuse.de- \"should-stop\" in lwresd init script fixed
* Wed Aug 13 2008 sschoberAATTsuse.de- Copy complete /etc/named.d to change root jail (bnc#408145).
* Tue Aug 12 2008 ugAATTsuse.de- performance improvement over the P1 releases, namely + significantly remedying the port allocation issues + allowing TCP queries and zone transfers while issuing as many outstanding UDP queries as possible + additional security of port randomization at the same level as P1- also includes fixes for several bugs in the 9.5.0 base code- 9.5.0-P2
* Sun Jul 27 2008 ajAATTsuse.de- Remove .la files, they only introduce more problems and require libxml2.la installation.
* Wed Jul 16 2008 ugAATTsuse.de- BIND 9.5 offers many new features, including many behind-the-scenes improvements. For the most part, the non-visible features help ISC\'s customers who have run into the upper-end of what BIND 9.4 could handle. See CHANGES for details- Statistics Counters / server- Cache cleaning enhancements- GSS TSIG- DHCID Resource Record (RR)- Handling EDNS timeouts- version 9.5.0
* Mon Jun 09 2008 ugAATTsuse.de- VUL-0: spoofing made easier due to non-random UDP source port VU#800113 (bnc#396963)
* Tue May 06 2008 ugAATTsuse.de- capset support fixed (bnc#386653)
* Thu Apr 10 2008 roAATTsuse.de- added baselibs.conf file to build xxbit packages for multilib support
* Tue Feb 26 2008 ugAATTsuse.de- root.hint file updated (#361094)
* Thu Dec 06 2007 ugAATTsuse.de- version 9.4.2 (more than 50 bugs fixed. See changelog. for details)- root.hint file updated
* Thu Jul 26 2007 mtAATTsuse.de- Bug #294403: updated to security release 9.4.1-P1 fixing: CVE-2007-2926: cryptographically weak query ids [RT #16915]. CVE-2007-2925: allow-query-cache/allow-recursion default acls not set [RT #16987], [RT #16960].
* Sat May 26 2007 roAATTsuse.de- added ldconfig to postinstall script for bind-libs
* Tue May 15 2007 ugAATTsuse.de- added apparmor profile
* Wed May 02 2007 ugAATTsuse.de- version 9.4.1- query_addsoa() was being called with a non zone db. [RT #16834]
* Fri Mar 30 2007 ugAATTsuse.de- libidnkitres.la moved to bind-libs for runidn
* Thu Mar 29 2007 rguentherAATTsuse.de- Package .la files in -devel subpackage.- Do not package useless .la files.- Make -devel package depend on -libs package, not -utils package.
* Mon Mar 05 2007 ugAATTsuse.de- SuSEFirewall service file added (#246920) fate #300687
* Tue Feb 27 2007 ugAATTsuse.de- version 9.3.4 to 9.4.0- too many changes to list them all here. Please see the CHANGELOG for details- LDAP backend dropped
* Thu Jan 25 2007 ugAATTsuse.de- Bug #238634- [security] Serialise validation of type ANY responses. [RT #16555]- [security] It was possible to dereference a freed fetch context. [RT #16584]- version 9.3.3 to 9.3.4
* Fri Jan 19 2007 ugAATTsuse.de- version 9.3.2 to 9.3.3- lots of bugfixes (see changelog for details)
* Tue Jan 02 2007 ugAATTsuse.de- load of bind during boot fails if ip-up starts modify_resolvconf at the same time (#221948)
* Fri Nov 10 2006 ugAATTsuse.de- security fix (#218303) workarounds OpenSSL\'s recently discovered RSA signature verification issue (CVE-2006-4339) by using the exponent 65537 (0x10001) instead of the widely used 3.
* Tue Oct 17 2006 poemlAATTsuse.de- there is no SuSEconfig.syslog script anymore, thus remove the YaST hint from the sysconfig template
* Mon Oct 16 2006 ugAATTsuse.de- typo in sysconfig file fixed (#212337)
* Fri Sep 01 2006 ugAATTsuse.de- security fix Bug #201424 VUL-0: bind: two denial-of-service attacks VU#697164 BIND INSIST failure due to excessive recursive queries VU#915404 BIND assertion failure during SIG query processing
* Tue Aug 15 2006 ugAATTsuse.de- update messages removed
* Fri Aug 04 2006 ugAATTsuse.de- moved the la files to bind-utils (#182448)
* Thu Jul 06 2006 ugAATTsuse.de- fix for the nsupdate man page (#92730) thanx to Werner