Changelog for dnsmasq-2.89-7.6.x86_64.rpm :

* Sat May 13 2023 gmbr3AATTopensuse.org- Correct rundir from /var/run to /run for pid file
* Tue Apr 25 2023 maxAATTsuse.com- bsc#1209358, CVE-2023-28450, dnsmasq-CVE-2023-28450.patch: default maximum EDNS.0 UDP packet size should be 1232
* Mon Feb 06 2023 infoAATTpaolostivanin.com- update to 2.89:
* Fix bug introduced in 2.88 (commit fe91134b) which can result in corruption of the DNS cache internal data structures and logging of \"cache internal error\". This has only been seen in one place in the wild, and it took considerable effort to even generate a test case to reproduce it, but there\'s no way to be sure it won\'t strike, and the effect is to break the cache badly. Installations with DNSSEC enabled are more likely to see the problem, but not running DNSSEC does not guarantee that it won\'t happen. Thanks to Timo van Roermund for reporting the bug and for his great efforts in chasing it down. (boo#1207174)- remove no longer needed rpmlintrc filters
* Fri Dec 23 2022 dmuellerAATTsuse.com- update to 2.88:
* Fix bug in --dynamic-host when an interface has /16 IPv4
* address.
* Add --fast-dns-retry option. This gives dnsmasq the ability to originate retries for upstream DNS queries itself, rather than relying on the downstream client. This is most useful when doing DNSSEC over unreliable upstream networks. It comes with some cost in memory usage and network bandwidth.
* Add --use-stale-cache option. When set, if a DNS name exists in the cache, but its time-to-live has expired, dnsmasq will return the data anyway.
* handle removal of whole files or entries within files.
* Wed Oct 26 2022 dmuellerAATTsuse.com- update to 2.87 (bsc#1197872, CVE-2022-0934):
* Allow arbitrary prefix lengths in --rev-server and - -domain=....,local
* Replace --address=/#/..... functionality which got missed in the 2.86 domain search rewrite.
* Add --nftset option, like --ipset but for the newer nftables.
* Add --filter-A and --filter-AAAA options, to remove IPv4 or IPv6 addresses from DNS answers.
* Fix crash doing netbooting when --port is set to zero to disable the DNS server. Thanks to Drexl Johannes for the bug report.
* Generalise --dhcp-relay. Sending via broadcast/multicast is now supported for both IPv4 and IPv6 and the configuration syntax made easier (but backwards compatible).
* Add snooping of IPv6 prefix-delegations to the DHCP-relay system.
* Finesse parsing of --dhcp-remoteid and --dhcp-subscrid. To be treated as hex, the pattern must consist of only hex digits AND contain at least one \':\'. Thanks to Bengt-Erik Sandstrom who tripped over a pattern consisting of a decimal number which was interpreted surprisingly.
* Include client address in TFTP file-not-found error reports. Thanks to Stefan Rink for the initial patch, which has been re-worked by me (srk). All bugs mine.
* Note in manpage the change in behaviour of -address. This behaviour actually changed in v2.86, but was undocumented there. From 2.86 on, (eg) --address=/example.com/1.2.3.4 ONLY applies to A queries. All other types of query will be sent upstream. Pre 2.86, that would catch the whole example.com domain and queries for other types would get a local NODATA answer. The pre-2.86 behaviour is still available, by configuring --address=/example.com/1.2.3.4 --local=/example.com/
* Fix problem with binding DHCP sockets to an individual interface. Despite the fact that the system call tales the interface _name_ as a parameter, it actually, binds the socket to interface _index_. Deleting the interface and creating a new one with the same name leaves the socket bound to the old index. (Creating new sockets always allocates a fresh index, they are not reused). We now take this behaviour into account and keep up with changing indexes.
* Add --conf-script configuration option.
* Enhance --domain to accept, for instance, - -domain=net2.thekelleys.org.uk,eth2 so that hosts get a domain which relects the interface they are attached to in a way which doesn\'t require hard-coding addresses. Thanks to Sten Spans for the idea.
* Fix write-after-free error in DHCPv6 server code. CVE-2022-0934 refers.
* Add the ability to specify destination port in DHCP-relay mode. This change also removes a previous bug where --dhcp-alternate-port would affect the port used to relay _to_ as well as the port being listened on. The new feature allows configuration to provide bug-for-bug compatibility, if required. Thanks to Damian Kaczkowski for the feature suggestion.
* Bound the value of UDP packet size in the EDNS0 header of forwarded queries to the configured or default value of edns-packet-max. There\'s no point letting a client set a larger value if we\'re unable to return the answer. Thanks to Bertie Taylor for pointing out the problem and supplying the patch.- drop dnsmasq-CVE-2022-0934.patch, dnsmasq-resolv-conf.patch (upstream)
* Fri Sep 09 2022 gmbr3AATTopensuse.org- Ensure the dnsmasq user\'s group is used- Remove nogroup requirement
* Wed Jun 08 2022 gmbr3AATTopensuse.org- Move the dbus-1 system.d file to /usr (bsc#1200344)
* Tue Apr 05 2022 maxAATTsuse.com- bsc#1197872, CVE-2022-0934, dnsmasq-CVE-2022-0934.patch: Heap use after free in dhcp6_no_relay
* Thu Nov 18 2021 maxAATTsuse.com- bsc#1192529, dnsmasq-resolv-conf.patch: Fix a segfault when re-reading an empty resolv.conf- Remove \"nogroup\" membership from the dnsmasq user.
* Wed Oct 20 2021 gmbr3AATTopensuse.org- Use systemd-sysusers from 15.3 onwards
* Thu Sep 23 2021 maxAATTsuse.com- jsc#SLE-17936: Sync this state from Factory to SLE-15-SP1.- SLE bugs that got fixed upstream between 2.79 and 2.86, but for which we need to keep references when syncing:
* bsc#1176076: dnsmasq-servfail.patch
* bsc#1156543: dnsmasq-siocgstamp.patch
* bsc#1138743: dnsmasq-cache-size.patch
* bsc#1076958: CVE-2017-15107, dnsmasq-CVE-2017-15107.patch
* bsc#1180914: Open inotify socket only when used.
* removed dnsmasq-dnspooq.patch- bsc#1173646, CVE-2020-14312: Set --local-service by default.
* Fri Sep 17 2021 maxAATTsuse.com- Update to 2.86:
* Handle DHCPREBIND requests in the DHCPv6 server code.
* Fix bug which caused dnsmasq to lose track of processes forked to handle TCP DNS connections under heavy load.
* Major rewrite of the DNS server and domain handling code. This should be largely transparent, but it drastically improves performance and reduces memory foot-print when configuring large numbers of domains.
* Revise resource handling for number of concurrent DNS queries.
* Improve efficiency of DNSSEC.
* Connection track mark based DNS query filtering.
* Allow smaller than 64 prefix lengths in synth-domain, with caveats. - -synth-domain=1234:4567::/56,example.com is now valid.
* Make domains generated by --synth-domain appear in replies when in authoritative mode.
* Ensure CAP_NET_ADMIN capability is available when conntrack is configured.
* When --dhcp-hostsfile --dhcp-optsfile and --addn-hosts are given a directory as argument, define the order in which files within that directory are read (alphabetical order of filename).
* Tue Sep 14 2021 jsegitzAATTsuse.com- Added hardening to systemd service(s) (bsc#1181400).
* Sun Jun 13 2021 gmbr3AATTopensuse.org- Add now working CONFIG parameter to sysusers generator
* Wed Jun 02 2021 gmbr3AATTopensuse.org- Change to using systemd-sysusers on TW
* Mon Apr 19 2021 maxAATTsuse.com- Update to 2.85:
* Fix problem with DNS retries in 2.83/2.84.
* Tweak sort order of tags in get-version.
* Avoid treating a --dhcp-host which has an IPv6 address as eligible for use with DHCPv4 on the grounds that it has no address, and vice-versa.
* Add --dynamic-host option: A and AAAA records which take their network part from the network of a local interface. Useful for routers with dynamically prefixes.
* Teach --bogus-nxdomain and --ignore-address to take an IPv4 subnet.
* CVE-2021-3448, bsc#1183709: Use random source ports where possible if source addresses/interfaces in use.
* Change the method of allocation of random source ports for DNS.
* Scale the size of the DNS random-port pool based on the value of the --dns-forward-max configuration.
* Tweak TFTP code to check sender of all received packets, as specified in RFC 1350 para 4.
* Mon Feb 08 2021 dmuellerAATTsuse.com- update to 2.84:
* Change HAVE_NETTLEHASH compile-time to HAVE_CRYPTOHASH
* Tidy initialisation in hash_questions.c
* Optimise sort_rrset for the case where the RR type
* Move fd into frec_src
* Wed Jan 27 2021 gmbr3AATTopensuse.org- Fix building with lua54
* Tue Jan 19 2021 maxAATTsuse.com- Update to 2.83:
* bsc#1177077: Fixed DNSpooq vulnerabilities
* Use the values of --min-port and --max-port in outgoing TCP connections to upstream DNS servers.
* Fix a remote buffer overflow problem in the DNSSEC code. Any dnsmasq with DNSSEC compiled in and enabled is vulnerable to this, referenced by CVE-2020-25681, CVE-2020-25682, CVE-2020-25683 CVE-2020-25687.
* Be sure to only accept UDP DNS query replies at the address from which the query was originated. This keeps as much entropy in the {query-ID, random-port} tuple as possible, to help defeat cache poisoning attacks. Refer: CVE-2020-25684.
* Use the SHA-256 hash function to verify that DNS answers received are for the questions originally asked. This replaces the slightly insecure SHA-1 (when compiled with DNSSEC) or the very insecure CRC32 (otherwise). Refer: CVE-2020-25685
* Handle multiple identical near simultaneous DNS queries better. Previously, such queries would all be forwarded independently. This is, in theory, inefficent but in practise not a problem, _except_ that is means that an answer for any of the forwarded queries will be accepted and cached. An attacker can send a query multiple times, and for each repeat, another {port, ID} becomes capable of accepting the answer he is sending in the blind, to random IDs and ports. The chance of a succesful attack is therefore multiplied by the number of repeats of the query. The new behaviour detects repeated queries and merely stores the clients sending repeats so that when the first query completes, the answer can be sent to all the clients who asked. Refer: CVE-2020-25686.
* Tue Jul 28 2020 mreyAATTsuse.com- Update to 2.82:
* Improve behaviour in the face of network interfaces which come and go and change index.
* Convert hard startup failure on NETLINK_NO_ENOBUFS under qemu-user to a warning.
* Allow IPv6 addresses ofthe form [::ffff:1.2.3.4] in - -dhcp-option.
* Fix crash under heavy TCP connection load introduced in 2.81.
* Change default lease time for DHCPv6 to one day.
* Alter calculation of preferred and valid times in router advertisements, so that these do not have a floor applied of the lease time in the dhcp-range if this is not explicitly specified and is merely the default.- Reformat spec file with spec-cleaner
* Tue May 05 2020 infoAATTpaolostivanin.com- Update to 2.81:
* Improve cache behaviour for TCP connections
* Remove the NO_FORK compile-time option, and support for uclinux
* Fix line-counting when reading /etc/hosts and friends
* Fix bug in DNS non-terminal code, added in 2.80, which could sometimes cause a NODATA rather than an NXDOMAIN reply.
* Support TCP-fastopen (RFC-7413) on both incoming and outgoing TCP connections, if supported and enabled in the OS.
* Improve kernel-capability manipulation code under Linux
* Add --shared-network config. This enables allocation of addresses by the DHCP server in subnets where the server (or relay) does not have an interface on the network in that subnet. Many thanks to kamp.de for sponsoring this feature.
* Fix broken contrib/lease_tools/dhcp_lease_time.c. A packet validation check got borked in commit 2b38e382 and release 2.80. Thanks to Tomasz Szajner for spotting this.
* Fix compilation against nettle version 3.5 and later.
* Fix spurious DNSSEC validation failures when the auth section of a reply contains unsigned RRs from a signed zone, with the exception that NSEC and NSEC3 RRs must always be signed. Thanks to Tore Anderson for spotting and diagnosing the bug.
* Add --dhcp-ignore-clid. This disables reading of DHCP client identifier option (option 61), so clients are only identified by MAC addresses.
* Fix a bug which stopped --dhcp-name-match from working when a hostname is supplied in --dhcp-host. Thanks to James Feeney for spotting this.
* Fix bug which caused very rarely caused zero-length DHCPv6 packets. Thanks to Dereck Higgins for spotting this.
* Add --tftp-single-port option.
* Enhance --conf-dir to load files in a deterministic order
* Add filtering by tag of --dhcp-host directives
* Remove DSA signature verification from DNSSEC, as specified in RFC 8624
* Add --script-on-renewal option.- Remove Fix-build-with-libnettle-3.5.patch- Remove 0001-fix-build-after-y2038-changes-in-glibc.patch- Remove dnsmasq-CVE-2019-14834.patch
* Sat Nov 30 2019 dimstarAATTopensuse.org- Remove redundant %else without meaning (if/else/else/endif?)
* Wed Nov 13 2019 maxAATTsuse.com- bsc#1154849, CVE-2019-14834, dnsmasq-CVE-2019-14834.patch: memory leak in the create_helper() function in /src/helper.c- bsc#1143454: Require user(tftp) instead of creating it ourselves.- Package contrib/lease-tools/dhcp_release6.- bsc#1152539: include config files from /etc/dnsmasq.d/
*.conf .
* Wed Sep 04 2019 stefan.bruensAATTrwth-aachen.de- Add Fix-build-with-libnettle-3.5.patch
* Tue Jul 23 2019 matthias.gerstnerAATTsuse.com- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html
* Wed Jul 10 2019 jslabyAATTsuse.com- add 0001-fix-build-after-y2038-changes-in-glibc.patch
* Tue Jun 11 2019 dimstarAATTopensuse.org- BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to shortcut the build queues by allowing usage of systemd-mini
* Fri Feb 22 2019 fbuiAATTsuse.com- Drop use of $FIRST_ARG in .spec The use of $FIRST_ARG was probably required because of the %service_
* rpm macros were playing tricks with the shell positional parameters. This is bad practice and error prones so let\'s assume that no macros should do that anymore and hence it\'s safe to assume that positional parameters remains unchanged after any rpm macro call.
* Wed Jan 23 2019 crrodriguezAATTopensuse.org- libidn should not be used anymore, switch to libidn2
* Mon Oct 22 2018 jengelhAATTinai.de- Ensure neutrality of descriptions. / Replace description with new upstream description.- Do not hide failures from user/group additions.- Replace old $RPM_
* shell vars by macros.
* Sun Oct 21 2018 seanAATTsuspend.net- Updated to dnsmasq 2.80
* Add support for RFC 4039 DHCP rapid commit
* Alter the default for dnssec-check-unsigned
* Fix DHCP when --no-ping and --dhcp-sequential-ip are set
* Allow zone transfer in authoritative mode if auth-peer is specified
* FIx missing fatal errors with some malformed options
* Fix crash on startup with a --synth-domain which has no prefix
* Fri Oct 19 2018 cgollAATTsuse.com- enabled lua scripting interface (FATE#327143).
* Wed Aug 29 2018 dmuellerAATTsuse.com- add missing prereq on the group to be created (bsc#1106446)
* Mon Jul 16 2018 kukukAATTsuse.de- Don\'t require systemd explicit, fix spec file to handle both cases correct. In containers we don\'t have systemd.- Adjust pre/post install for transactional updates.- Use %license instead of %doc [bsc#1082318]
* Mon Dec 04 2017 idonmezAATTsuse.com- Update keyring
* Fri Dec 01 2017 cbosdonnatAATTsuse.com- Get rid of python dependency due to examples. (fate#323526)
* Mon Oct 02 2017 maxAATTsuse.com- Security update to version 2.78:
* bsc#1060354, CVE-2017-14491: 2 byte heap based overflow.
* bsc#1060355, CVE-2017-14492: heap based overflow.
* bsc#1060360, CVE-2017-14493: stack based overflow.
* bsc#1060361, CVE-2017-14494: DHCP - info leak.
* bsc#1060362, CVE-2017-14495: DNS - OOM DoS.
* bsc#1060364, CVE-2017-14496: DNS - DoS Integer underflow.
* Fix DHCP relaying, broken in 2.76 and 2.77.
* For other changes, see http://www.thekelleys.org.uk/dnsmasq/CHANGELOG- Obsoleted patches:
* Fix-crash-introduced-in-2675f2061525bc954be14988d643.patch
* Handle-binding-upstream-servers-to-an-interface.patch
* Tue Sep 12 2017 tchvatalAATTsuse.com- Fix /srv/tftpboot permissions wrt bsc#940608
* Fri Aug 18 2017 dmuellerAATTsuse.com- reload system dbus to pick up policy change on install (bsc#1054429)
* Wed Jan 04 2017 martin.wilckAATTsuse.com- Handle binding upstream servers to an interface if interface is destroyed and recreated (boo#1018160) Added two patches from upstream:
* added Handle-binding-upstream-servers-to-an-interface.patch
* added Fix-crash-introduced-in-2675f2061525bc954be14988d643.patch
* Wed Aug 03 2016 maxAATTsuse.com- Update to 2.76:
* Include 0.0.0.0/8 in DNS rebind checks.
* Enhance --add-subnet to allow arbitrary subnet addresses.
* Respect the --no-resolv flag in inotify code. Fixes bug which caused dnsmasq to fail to start if a resolv-file was a dangling symbolic link, even of --no-resolv set.
* Fix crash when an A or AAAA record is defined locally, in a hosts file, and an upstream server sends a reply that the same name is empty (CVE-2015-8899, bsc#983273).
* Fix failure to correctly calculate cache-size when reading a hosts-file fails.
* Fix wrong answer to simple name query when --domain-needed set, but no upstream servers configured.
* Return REFUSED when running out of forwarding table slots, not SERVFAIL.
* Add --max-port configuration.
* Add --script-arp and two new functions for the dhcp-script.
* Extend --add-mac to allow a new encoding of the MAC address as base64, by configurting --add-mac=base64
* Add --add-cpe-id option.
* Don\'t crash with divide-by-zero if an IPv6 dhcp-range is declared as a whole /64. (ie xx::0 to xx::ffff:ffff:ffff:ffff)
* Add support for a TTL parameter in --host-record and --cname.
* Add --dhcp-ttl option.
* Add --tftp-mtu option.
* Check return-code of inet_pton() when parsing dhcp-option.
* Fix wrong value for EDNS UDP packet size when using - -servers-file to define upstream DNS servers.
* Add dhcp_release6 to contrib/lease-tools.
* Thu Jun 16 2016 maxAATTsuse.com- dnsmasq-groups.patch: Initialize the supplementary groups of the dnsmasq user (bsc#859298).
* Tue Feb 02 2016 mpluskalAATTsuse.com- Add gpg signature
* Mon Aug 24 2015 stefan.bruensAATTrwth-aachen.de- spec file cleanup, get rid of redifinition warnings
* Tue Aug 11 2015 stefan.bruensAATTrwth-aachen.de- Update to 2.75, announce message: Fix reversion on 2.74 which caused 100% CPU use when a dhcp-script is configured. Thanks to Adrian Davey for reporting the bug and testing the fix.- Update to 2.74, announce message: Fix reversion in 2.73 where --conf-file would attempt to read the default file, rather than no file. Fix inotify code to handle dangling symlinks better and not SEGV in some circumstances. DNSSEC fix. In the case of a signed CNAME generated by a wildcard which pointed to an unsigned domain, the wrong status would be logged, and some necessary checks omitted.- Update to 2.73, announce message: Fix crash at startup when an empty suffix is supplied to - -conf-dir, also trivial memory leak. Thanks to Tomas Hozza for spotting this. Remove floor of 4096 on advertised EDNS0 packet size when DNSSEC in use, the original rationale for this has long gone. Thanks to Anders Kaseorg for spotting this. Use inotify for checking on updates to /etc/resolv.conf and friends under Linux. This fixes race conditions when the files are updated rapidly and saves CPU by noy polling. To build a binary that runs on old Linux kernels without inotify, use make COPTS=-DNO_INOTIFY Fix breakage of --domain=,,local - only reverse queries were intercepted. THis appears to have been broken since 2.69. Thanks to Josh Stone for finding the bug. Eliminate IPv6 privacy addresses and deprecated addresses from the answers given by --interface-name. Note that reverse queries (ie looking for names, given addresses) are not affected. Thanks to Michael Gorbach for the suggestion. Fix crash in DNSSEC code with long RRs. Thanks to Marco Davids for the bug report. Add --ignore-address option. Ignore replies to A-record queries which include the specified address. No error is generated, dnsmasq simply continues to listen for another reply. This is useful to defeat blocking strategies which rely on quickly supplying a forged answer to a DNS request for certain domains, before the correct answer can arrive. Thanks to Glen Huang for the patch. Revisit the part of DNSSEC validation which determines if an unsigned answer is legit, or is in some part of the DNS tree which should be signed. Dnsmasq now works from the DNS root downward looking for the limit of signed delegations, rather than working bottom up. This is both more correct, and less likely to trip over broken nameservers in the unsigned parts of the DNS tree which don\'t respond well to DNSSEC queries. Add --log-queries=extra option, which makes logs easier to search automatically. Add --min-cache-ttl option. I\'ve resisted this for a long time, on the grounds that disbelieving TTLs is never a good idea, but I\'ve been persuaded that there are sometimes reasons to do it. (Step forward, GFW). To avoid misuse, there\'s a hard limit on the TTL floor of one hour. Thansk to RinSatsuki for the patch. Cope with multiple interfaces with the same link-local address. (IPv6 addresses are scoped, so this is allowed.) Thanks to Cory Benfield for help with this. Add --dhcp-hostsdir. This allows addition of new host configurations to a running dnsmasq instance much more cheaply than having dnsmasq re-read all its existing configuration each time. Don\'t reply to DHCPv6 SOLICIT messages if we\'re not configured to do stateful DHCPv6. Thanks to Win King Wan for the patch. Fix broken DNSSEC validation of ECDSA signatures. Add --dnssec-timestamp option, which provides an automatic way to detect when the system time becomes valid after boot on systems without an RTC, whilst allowing DNS queries before the clock is valid so that NTP can run. Thanks to Kevin Darbyshire-Bryant for developing this idea. Add --tftp-no-fail option. Thanks to Stefan Tomanek for the patch. Fix crash caused by looking up servers.bind, CHAOS text record, when more than about five --servers= lines are in the dnsmasq config. This causes memory corruption which causes a crash later. Thanks to Matt Coddington for sterling work chasing this down. Fix crash on receipt of certain malformed DNS requests. Thanks to Nick Sampanis for spotting the problem. Note that this is could allow the dnsmasq process\'s memory to be read by an attacker under certain circumstances, so it has a CVE, CVE-2015-3294 Fix crash in authoritative DNS code, if a .arpa zone is declared as authoritative, and then a PTR query which is not to be treated as authoritative arrived. Normally, directly declaring .arpa zone as authoritative is not done, so this crash wouldn\'t be seen. Instead the relevant .arpa zone should be specified as a subnet in the auth-zone declaration. Thanks to Johnny S. Lee for the bugreport and initial patch. Fix authoritative DNS code to correctly reply to NS and SOA queries for .arpa zones for which we are declared authoritative by means of a subnet in auth-zone. Previously we provided correct answers to PTR queries in such zones (including NS and SOA) but not direct NS and SOA queries. Thanks to Johnny S. Lee for pointing out the problem. Fix logging of DHCPREPLY which should be suppressed by quiet-dhcp6. Thanks to J. Pablo Abonia for spotting the problem. Try and handle net connections with broken fragmentation that lose large UDP packets. If a server times out, reduce the maximum UDP packet size field in the EDNS0 header to 1280 bytes. If it then answers, make that change permanent. Check IPv4-mapped IPv6 addresses when --stop-rebind is active. Thanks to Jordan Milne for spotting this. Allow DHCPv4 options T1 and T2 to be set using --dhcp-option. Thanks to Kevin Benton for patches and work on this. Fix code for DHCPCONFIRM DHCPv6 messages to confirm addresses in the correct subnet, even of not in dynamic address allocation range. Thanks to Steve Hirsch for spotting the problem. Add AddDhcpLease and DeleteDhcpLease DBus methods. Thanks to Nicolas Cavallari for the patch. Allow configuration of router advertisements without the \"on-link\" bit set. Thanks to Neil Jerram for the patch. Extend --bridge-interface to DHCPv6 and router advertisements. Thanks to Neil Jerram for the patch.
* Wed Jun 17 2015 crrodriguezAATTopensuse.org- dnsmasq.service: Order Before=nss-lookup.target and Wants=nss-lookup.target as this service may provide name resolution even for the localhost.
* Mon Apr 20 2015 abergmannAATTsuse.com- Move trust-anchors.conf into /etc/dnsmasq.d to be AppArmor conform. (bnc#908137)
* Tue Jan 06 2015 jslabyAATTsuse.com- The change from Wed Dec 24 messed group w/ user IDs. Switch them back and be more careful w/ what is changed.
* Mon Dec 29 2014 dimstarAATTopensuse.org- Fix symlink of rcFOO to /usr/sbin/service, resolving a dangling symlink lint warning (and remove the same from rpmlintrc).
* Thu Dec 25 2014 nemysisAATTgmx.ch- Remove from spec group_and_isc.patch, forgotten in previous commit
* Wed Dec 24 2014 nemysisAATTgmx.ch- Update to 2.72, announce message: Add ra-advrouter mode, for RFC-3775 mobile IPv6 support. Add support for \"ipsets\" in
*BSD, using pf. Thanks to Sven Falempim for the patch. Fix race condition which could lock up dnsmasq when an interface goes down and up rapidly. Thanks to Conrad Kostecki for helping to chase this down. Add DBus methods SetFilterWin2KOption and SetBogusPrivOption Thanks to the Smoothwall project for the patch. Fix failure to build against Nettle-3.0. Thanks to Steven Barth for spotting this and finding the fix. When assigning existing DHCP leases to intefaces by comparing networks, handle the case that two or more interfaces have the same network part, but different prefix lengths (favour the longer prefix length.) Thanks to Lung-Pin Chang for the patch. Add a mode which detects and removes DNS forwarding loops, ie a query sent to an upstream server returns as a new query to dnsmasq, and would therefore be forwarded again, resulting in a query which loops many times before being dropped. Upstream servers which loop back are disabled and this event is logged. Thanks to Smoothwall for their sponsorship of this feature. Extend --conf-dir to allow filtering of files. So - -conf-dir=/etc/dnsmasq.d,\\
*.conf will load all the files in /etc/dnsmasq.d which end in .conf Fix bug when resulted in NXDOMAIN answers instead of NODATA in some circumstances. Fix bug which caused dnsmasq to become unresponsive if it failed to send packets due to a network interface disappearing. Thanks to Niels Peen for spotting this. Fix problem with --local-service option on big-endian platforms Thanks to Richard Genoud for the patch.- Add dnsmasq-rpmlintrc, for false positive scripts and symlink- Add BuildRequires for dos2unix- Use sed instead of simple patch group_and_isc.patch
* Sun Nov 09 2014 seife+obsAATTb1-systems.com- fix logging, PrivateDevices=yes kills it (bnc#902511, bnc#904537)
* Tue Aug 26 2014 dsterbaAATTsuse.cz- enable DNSSEC - require libnettle - package trust-anchors.conf- spec fixes: - define HAVE_ flags on commandline, otherwise \'dnsmasq --version\' will not correctly reflect the feature status
* Fri Aug 22 2014 meissnerAATTsuse.com- actually build with relro and pie. (bnc#893057)
* Wed Aug 06 2014 vwallfahrerAATTsuse.com- Removed Suse and all other OS/Distribution related subdirs from contrib, so only the rest gets packaged. The subdirs are not necessary anymore (bnc#889028).
* Tue Aug 05 2014 vwallfahrerAATTsuse.com- Removed README.SUSE file, it was to confusing and not necessary (bnc#889972). Information is already present in the upstream documentation.- Split up vendor-files.tar.bz2 into single files- Comply with systemd packaging guidlines
* Thu Jun 12 2014 cdenicoloAATTsuse.com- license update: GPL-2.0 or GPL-3.0 correct license is dual GPL-2.0 or GPL-3.0; please add COPYING-v3-file to RPM.
* Wed Jun 11 2014 dmuellerAATTsuse.com- update to 2.71: Subtle change to error handling to help DNSSEC validation when servers fail to provide NODATA answers for non-existent DS records. Tweak code which removes DNSSEC records from answers when not required. Fixes broken answers when additional section has real records in it. Thanks to Marco Davids for the bug report. Fix DNSSEC validation of ANY queries. Thanks to Marco Davids for spotting that too. Fix total DNS failure and 100% CPU use if cachesize set to zero, regression introduced in 2.69. Thanks to James Hunt and the Ubuntu crowd for assistance in fixing this. Fix crash, introduced in 2.69, on TCP request when dnsmasq compiled with DNSSEC support, but running without DNSSEC enabled. Thanks to Manish Sing for spotting that one. Fix regression which broke ipset functionality. Thanks to Wang Jian for the bug report. Implement dynamic interface discovery on
*BSD. This allows the contructor: syntax to be used in dhcp-range for DHCPv6 on the BSD platform. Thanks to Matthias Andree for valuable research on how to implement this. Fix infinite loop associated with some --bogus-nxdomain configs. Thanks fogobogo for the bug report. Fix missing RA RDNS option with configuration like - -dhcp-option=option6:23,[::] Thanks to Tsachi Kimeldorfer for spotting the problem. Add [fd00::] and [fe80::] as special addresses in DHCPv6 options, analogous to [::]. [fd00::] is replaced with the actual ULA of the interface on the machine running dnsmasq, [fe80::] with the link-local address. Thanks to Tsachi Kimeldorfer for championing this. DNSSEC validation and caching. Dnsmasq needs to be compiled with this enabled, with make dnsmasq COPTS=-DHAVE_DNSSEC this add dependencies on the nettle crypto library and the gmp maths library. It\'s possible to have these linked statically with make dnsmasq COPTS=\'-DHAVE_DNSSEC -DHAVE_DNSSEC_STATIC\' which bloats the dnsmasq binary, but saves the size of the shared libraries which are much bigger. To enable, DNSSEC, you will need a set of trust-anchors. Now that the TLDs are signed, this can be the keys for the root zone, and for convenience they are included in trust-anchors.conf in the dnsmasq distribution. You should of course check that these are legitimate and up-to-date. So, adding conf-file=/path/to/trust-anchors.conf dnssec to your config is all thats needed to get things working. The upstream nameservers have to be DNSSEC-capable too, of course. Many ISP nameservers aren\'t, but the Google public nameservers (8.8.8.8 and 8.8.4.4) are. When DNSSEC is configured, dnsmasq validates any queries for domains which are signed. Query results which are bogus are replaced with SERVFAIL replies, and results which are correctly signed have the AD bit set. In addition, and just as importantly, dnsmasq supplies correct DNSSEC information to clients which are doing their own validation, and caches DNSKEY, DS and RRSIG records, which significantly improve the performance of downstream validators. Setting --log-queries will show DNSSEC in action. If a domain is returned from an upstream nameserver without DNSSEC signature, dnsmasq by default trusts this. This means that for unsigned zone (still the majority) there is effectively no cost for having DNSSEC enabled. Of course this allows an attacker to replace a signed record with a false unsigned record. This is addressed by the - -dnssec-check-unsigned flag, which instructs dnsmasq to prove that an unsigned record is legitimate, by finding a secure proof that the zone containing the record is not signed. Doing this has costs (typically one or two extra upstream queries). It also has a nasty failure mode if dnsmasq\'s upstream nameservers are not DNSSEC capable. Without --dnssec-check-unsigned using such an upstream server will simply result in not queries being validated; with --dnssec-check-unsigned enabled and a DNSSEC-ignorant upstream server, _all_ queries will fail. Note that DNSSEC requires that the local time is valid and accurate, if not then DNSSEC validation will fail. NTP should be running. This presents a problem for routers without a battery-backed clock. To set the time needs NTP to do DNS lookups, but lookups will fail until NTP has run. To address this, there\'s a flag, --dnssec-no-timecheck which disables the time checks (only) in DNSSEC. When dnsmasq is started and the clock is not synced, this flag should be used. As soon as the clock is synced, SIGHUP dnsmasq. The SIGHUP clears the cache of partially-validated data and resets the no-timecheck flag, so that all DNSSEC checks henceforward will be complete. The development of DNSSEC in dnsmasq was started by Giovanni Bajo, to whom huge thanks are owed. It has been supported by Comcast, whose techfund grant has allowed for an invaluable period of full-time work to get it to a workable state. Add --rev-server. Thanks to Dave Taht for suggesting this. Add --servers-file. Allows dynamic update of upstream servers full access to configuration. Add --local-service. Accept DNS queries only from hosts whose address is on a local subnet, ie a subnet for which an interface exists on the server. This option only has effect if there are no --interface --except-interface, - -listen-address or --auth-server options. It is intended to be set as a default on installation, to allow unconfigured installations to be useful but also safe from being used for DNS amplification attacks. Fix crashes in cache_get_cname_target() when dangling CNAMEs encountered. Thanks to Andy and the rt-n56u project for find this and helping to chase it down. Fix wrong RCODE in authoritative DNS replies to PTR queries. The correct answer was included, but the RCODE was set to NXDOMAIN. Thanks to Craig McQueen for spotting this. Make statistics available as DNS queries in the .bind TLD as well as logging them. Use random addresses for DHCPv6 temporary address allocations, instead of algorithmically determined stable addresses. Fix bug which meant that the DHCPv6 DUID was not available in DHCP script runs during the lifetime of the dnsmasq process which created the DUID de-novo. Once the DUID was created and stored in the lease file and dnsmasq restarted, this bug disappeared. Fix bug introduced in 2.67 which could result in erroneous NXDOMAIN returns to CNAME queries. Fix build failures on MacOS X and openBSD. Allow subnet specifications in --auth-zone to be interface names as well as address literals. This makes it possible to configure authoritative DNS when local address ranges are dynamic and works much better than the previous work-around which exempted contructed DHCP ranges from the IP address filtering. As a consequence, that work-around is removed. Under certain circumstances, this change wil break existing configuration: if you\'re relying on the contructed-range exception, you need to change --auth-zone to specify the same interface as is used to construct your DHCP ranges, probably with a trailing \"/6\" like this: - -auth-zone=example.com,eth0/6 to limit the addresses to IPv6 addresses of eth0. Fix problems when advertising deleted IPv6 prefixes. If the prefix is deleted (rather than replaced), it doesn\'t get advertised with zero preferred time. Thanks to Tsachi for the bug report. Fix segfault with some locally configured CNAMEs. Thanks to Andrew Childs for spotting the problem. Fix memory leak on re-reading /etc/hosts and friends, introduced in 2.67. Check the arrival interface of incoming DNS and TFTP requests via IPv6, even in --bind-interfaces mode. This isn\'t possible for IPv4 and can generate scary warnings, but as it\'s always possible for IPv6 (the API always exists) then we should do it always. Tweak the rules on prefix-lengths in --dhcp-range for IPv6. The new rule is that the specified prefix length must be larger than or equal to the prefix length of the corresponding address on the local interface. Fix crash if upstream server returns SERVFAIL when - -conntrack in use. Thanks to Giacomo Tazzari for finding this and supplying the patch. Repair regression in 2.64. That release stopped sending lease-time information in the reply to DHCPINFORM requests, on the correct grounds that it was a standards violation. However, this broke the dnsmasq-specific dhcp_lease_time utility. Now, DHCPINFORM returns lease-time only if it\'s specifically requested (maintaining standards) and the dhcp_lease_time utility has been taught to ask for it (restoring functionality). Fix --dhcp-match, --dhcp-vendorclass and --dhcp-userclass to work with BOOTP and well as DHCP. Thanks to Peter Korsgaard for spotting the problem. Add --synth-domain. Thanks to Vishvananda Ishaya for suggesting this. Fix failure to compile ipset.c if old kernel headers are in use. Thanks to Eugene Rudoy for pointing this out. Handle IPv4 interface-address labels in Linux. These are often used to emulate the old IP-alias addresses. Before, using --interface=eth0 would service all the addresses of eth0, including ones configured as aliases, which appear in ifconfig as eth0:0. Now, only addresses with the label eth0 are active. This is not backwards compatible: if you want to continue to bind the aliases too, you need to add eg. --interface=eth0:0 to the config. Fix \"failed to set SO_BINDTODEVICE on DHCP socket: Socket operation on non-socket\" error on startup with configurations which have exactly one --interface option and do RA but _not_ DHCPv6. Thanks to Trever Adams for the bug report. Generalise --interface-name to cope with IPv6 addresses and multiple addresses per interface per address family. Fix option parsing for --dhcp-host, which was generating a spurious error when all seven possible items were included. Thanks to Zhiqiang Wang for the bug report. Remove restriction on prefix-length in --auth-zone. Thanks to Toke Hoiland-Jorgensen for suggesting this. Log when the maximum number of concurrent DNS queries is reached. Thanks to Marcelo Salhab Brogliato for the patch. If wildcards are used in --interface, don\'t assume that there will only ever be one available interface for DHCP just because there is one at start-up. More may appear, so we can\'t use SO_BINDTODEVICE. Thanks to Natrio for the bug report. Increase timeout/number of retries in TFTP to accomodate AudioCodes Voice Gateways doing streaming writes to flash. Thanks to Damian Kaczkowski for spotting the problem. Fix crash with empty DHCP string options when adding zero terminator. Thanks to Patrick McLean for the bug report. Allow hostnames to start with a number, as allowed in RFC-1123. Thanks to Kyle Mestery for the patch. Fixes to DHCP FQDN option handling: don\'t terminate FQDN if domain not known and allow a FQDN option with blank name to request that a FQDN option is returned in the reply. Thanks to Roy Marples for the patch. Make --clear-on-reload apply to setting upstream servers via DBus too. When the address which triggered the construction of an advertised IPv6 prefix disappears, continue to advertise the prefix for up to 2 hours, with the preferred lifetime set to zero. This satisfies RFC 6204 4.3 L-13 and makes things work better if a prefix disappears without being deprecated first. Thanks to Uwe Schindler for persuasively arguing for this. Fix MAC address enumeration on
*BSD. Thanks to Brad Smith for the bug report. Support RFC-4242 information-refresh-time options in the reply to DHCPv6 information-request. The lease time of the smallest valid dhcp-range is sent. Thanks to Uwe Schindler for suggesting this. Make --listen-address higher priority than --except-interface in all circumstances. Thanks to Thomas Hood for the bugreport. Provide independent control over which interfaces get TFTP service. If enable-tftp is given a list of interfaces, then TFTP is provided on those. Without the list, the previous behaviour (provide TFTP to the same interfaces we provide DHCP to) is retained. Thanks to Lonnie Abelbeck for the suggestion. Add --dhcp-relay config option. Many thanks to vtsl.net for sponsoring this development. Fix crash with empty tag: in --dhcp-range. Thanks to Kaspar Schleiser for the bug report. Add \"baseline\" and \"bloatcheck\" makefile targets, for revealing size changes during development. Thanks to Vladislav Grishenko for the patch. Cope with DHCPv6 clients which send REQUESTs without address options - treat them as SOLICIT with rapid commit. Support identification of clients by MAC address in DHCPv6. When using a relay, the relay must support RFC 6939 for this to work. It always works for directly connected clients. Thanks to Vladislav Grishenko for prompting this feature. Remove the rule for constructed DHCP ranges that the local address must be either the first or last address in the range. This was originally to avoid SLAAC addresses, but we now explicitly autoconfig and privacy addresses instead. Update Polish translation. Thanks to Jan Psota. Fix problem in DHCPv6 vendorclass/userclass matching code. Thanks to Tanguy Bouzeloc for the patch. Update Spanish transalation. Thanks to Vicente Soriano. Add --ra-param option. Thanks to Vladislav Grishenko for inspiration on this. Add --add-subnet configuration, to tell upstream DNS servers where the original client is. Thanks to DNSthingy for sponsoring this feature. Add --quiet-dhcp, --quiet-dhcp6 and --quiet-ra. Thanks to Kevin Darbyshire-Bryant for the initial patch. Allow A/AAAA records created by --interface-name to be the target of --cname. Thanks to Hadmut Danisch for the suggestion. Avoid treating a --dhcp-host which has an IPv6 address as eligable for use with DHCPv4 on the grounds that it has no address, and vice-versa. Thanks to Yury Konovalov for spotting the problem. Do a better job caching dangling CNAMEs. Thanks to Yves Dorfsman for spotting the problem. Add the ability to act as an authoritative DNS server. Dnsmasq can now answer queries from the wider \'net with local data, as long as the correct NS records are set up. Only local data is provided, to avoid creating an open DNS relay. Zone transfer is supported, to allow secondary servers to be configured. Add \"constructed DHCP ranges\" for DHCPv6. This is intended for IPv6 routers which get prefixes dynamically via prefix delegation. With suitable configuration, stateful DHCPv6 and RA can happen automatically as prefixes are delegated and then deprecated, without having to re-write the dnsmasq configuration file or restart the daemon. Thanks to Steven Barth for extensive testing and development work on this idea. Fix crash on startup on Solaris 11. Regression probably introduced in 2.61. Thanks to Geoff Johnstone for the patch. Add code to make behaviour for TCP DNS requests that same as for UDP requests, when a request arrives for an allowed address, but via a banned interface. This change is only active on Linux, since the relevant API is missing (AFAIK) on other platforms. Many thanks to Tomas Hozza for spotting the problem, and doing invaluable discovery of the obscure and undocumented API required for the solution. Don\'t send the default DHCP option advertising dnsmasq as the local DNS server if dnsmasq is configured to not act as DNS server, or it\'s configured to a non-standard port. Add DNSMASQ_CIRCUIT_ID, DNSMASQ_SUBCRIBER_ID, DNSMASQ_REMOTE_ID variables to the environment of the lease-change script (and the corresponding Lua). These hold information inserted into the DHCP request by a DHCP relay agent. Thanks to Lakefield Communications for providing a bounty for this addition. Fixed crash, introduced in 2.64, whilst handling DHCPv6 information-requests with some common configurations. Thanks to Robert M. Albrecht for the bug report and chasing the problem. Add --ipset option. Thanks to Jason A. Donenfeld for the patch. Don\'t erroneously reject some option names in --dhcp-match options. Thanks to Benedikt Hochstrasser for the bug report. Allow a trailing \'
*\' wildcard in all interface-name configurations. Thanks to Christian Parpart for the patch. Handle the situation where libc headers define SO_REUSEPORT, but the kernel in use doesn\'t, to cope with the introduction of this option to Linux. Thanks to Rich Felker for the bug report. Update Polish translation. Thanks to Jan Psota. Fix crash if the configured DHCP lease limit is reached. Regression occurred in 2.61. Thanks to Tsachi for the bug report. Update the French translation. Thanks to Gildas le Nadan.
* Wed Mar 26 2014 crrodriguezAATTopensuse.org- dnsmasq.service: Set PrivateDevices=yes so we run in a separate namespace with the bare minimum device nodes isolated from the host.
* Mon Apr 22 2013 meissnerAATTsuse.com- reintroduced /sbin/rcdnsmasq as /sbin/service link.
* Sat Apr 20 2013 crrodriguezAATTopensuse.org- Do not order after syslog.target which it is neither required not recommended and currently no longer even exists.
* Sat Apr 13 2013 cooloAATTsuse.com- sync /srv/tftpboot directory attributes with atftp package
* Wed Apr 03 2013 crrodriguezAATTopensuse.org- remove all sysvinit support
* Tue Mar 12 2013 vuntzAATTsuse.com- Create a utils subpackage to include DHCP lease management utils (that are living in contrib/wrt): + Explicitly build them in %build and install the files in %install. + Summary and description of the new subpackage are taken from Fedora.
* Fri Feb 22 2013 rmilasanAATTsuse.com- Install dnsmasq.service accordingly (/usr/lib/systemd for 12.3 and up or /lib/systemd for older versions).
* Fri Dec 14 2012 toganmAATTopensuse.org- Update to version 2.65. For other changes relating to other versions in between please see the CHANGELOG
* Fix regression which broke forwarding orgf queries sent via TCP which are not for A and AAAA and which were directed to non-default servers. Thanks to Niax for the bug reportst. Fix failure to build with DHCP support excluded. Thanks to Gustavo Zacarias for the patch. Fix nasty regression in 27.64 which completely broke cacheing.- renamed group_and_isc.diff to group_and_isc.patch rebasinp to -p1 level as outlined in the documentation at http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
* Thu Oct 04 2012 cfarrellAATTsuse.com- license update: GPL-2.0 Most of the source code files give a choice of either GPL-2.0 or GPL-3.0 (not GPL-2.0+). The website states that the COPYING file in the distribution is the official license - in this case it is GPL-2.0. This is consistent with what Fedora state about the package. Accordingly, I^d be ok with License: GPL-2.0 or License: (GPL-2.0 or GPL-3.0) but not License: GPL-2.0+
* Sun Jun 24 2012 crrodriguezAATTopensuse.org- Update to version 2.62, misc bugfixes- Fix CFLAGS/LDFLAGS usage- fix the small cache size problem in a different way by tweaking the build config instead.
* Sat Jun 23 2012 crrodriguezAATTopensuse.org- The default cache size is way too small (150 entries) use a sane default of 2000 as used in
*WRT embeeded routers which is still very conservative for a desktop/server machine.- use async logging
* Sun Apr 29 2012 pascal.bleserAATTopensuse.org- update to 2.61:
* add ra-names, ra-stateless and slaac keywords for DHCPv6: dnsmasq can now synthesise AAAA records for dual-stack hosts which get IPv6 addresses via SLAAC; it is also now possible to use SLAAC and stateless DHCPv6, and to tell clients to use SLAAC addresses as well as DHCP ones
* add --dhcp-duid to allow DUID-EN uids to be used
* explicity send DHCPv6 replies to the correct port, instead of relying on clients to send requests with the correct source address, since at least one client in the wild gets this wrong
* send a preference value of 255 in DHCPv6 replies when --dhcp-authoritative is in effect: his tells clients not to wait around for other DHCP servers
* better logging of DHCPv6 options
* add --host-record
* invoke the DHCP script with action \"tftp\" when a TFTP file transfer completes: the size of the file, address to which it was sent and complete pathname are supplied; note that version 2.60 introduced some script incompatibilties associated with DHCPv6, and this is a further change; to be safe, scripts should ignore unknown actions, and if not IPv6-aware, should exit if the environment variable DNSMASQ_IAID is set; the use-case for this is to track netboot/install
* update contrib/port-forward/dnsmasq-portforward to reflect the above
* set the environment variable DNSMASQ_LOG_DHCP when running the script id - -log-dhcp is in effect, so that script can taylor their logging verbosity
* arrange that addresses specified with --listen-address work even if there is no interface carrying the address; this is chiefly useful for IPv4 loopback addresses, where any address in 127.0.0.0/8 is a valid loopback address, but normally only 127.0.0.1 appears on the lo interface
* fix crash, introduced in 2.60, when a DHCPINFORM is received from a network which has no valid dhcp-range
* add a new DHCP lease time keyword, \"deprecated\" for --dhcp-range: this is only valid for IPv6, and sets the preffered lease time for both DHCP and RA to zero; the effect is that clients can continue to use the address for existing connections, but new connections will use other addresses, if they exist; this makes hitless renumbering at least possible
* fix bug in address6_available() which caused DHCPv6 lease aquistion to fail if more than one dhcp-range in use
* provide RDNSS and DNSSL data in router advertisements, using the settings provided for DHCP options option6:domain-search and option6:dns-server
* don\'t cache data from non-recursive nameservers, since it may erroneously look like a valid CNAME to a non-exitant name
* call SO_BINDTODEVICE on the DHCP socket(s) when doing DHCP on exacly one interface and --bind-interfaces is set; this makes the OpenStack use-case of one dnsmasq per virtual interface work
* give correct from-cache answers to explict CNAME queries
* add --tftp-lowercase option
* ensure that the DBus DhcpLeaseUpdated events are generated when a lease goes through INIT_REBOOT state, even if the dhcp-script is not in use
* Tue Mar 06 2012 ugAATTsuse.de- some dhcp fixes- Add Lua integration- Set TOS on DHCP sockets- Improve start-up speed when reading large hosts files- Fix problem if dnsmasq is started without the stdin- Allow the TFP server or boot server in --pxe-service- Support DHCPv6. Support is there for the sort of things the existing v4 server does, including tags, options, static addresses and relay support- Support IPv6 router advertisements- Fix long-standing wrinkle with --localise-queries that could result in wrong answers when DNS packets arrive via an interface other than the expected one- 2.60
* Wed Feb 08 2012 ugAATTsuse.de- added correct group for tftp (bnc#738905)
* Mon Feb 06 2012 crrodriguezAATTopensuse.org- Use systemd macros correctly- build with PIE and full RELRO.
* Thu Jan 19 2012 crrodriguezAATTopensuse.org- --enable-dbus must be explicit in systemd unit- default user is provided in config file or takes defaults on group_and_isc.diff
* Wed Jan 18 2012 crrodriguezAATTopensuse.org- dnsmasq has dbus support, use it for systemd service.
* Fri Nov 25 2011 ugAATTsuse.de- removed systemd config for pre-12.1
* Thu Nov 24 2011 crrodriguezAATTopensuse.org- Must be of type forking and change uid to dnsmasq
* Thu Nov 24 2011 crrodriguezAATTopensuse.org- Add systemd startup script
* Thu Oct 20 2011 ugAATTsuse.de- dnsmasq still announced itself as 2.59-RC1 no other code changes than just the correct version string
* Tue Oct 18 2011 ugAATTsuse.de- fixed binding to IPv6 link-local addresses (regression from 2.58)- 2.59
* Sun Sep 18 2011 jengelhAATTmedozas.de- Remove redundant tags/sections from specfile (cf. packaging guidelines)- Use %_smp_mflags for parallel build
* Fri Aug 26 2011 ugAATTsuse.de- Support scope-ids in IPv6 addresses of nameservers from /etc/resolv.conf and in --server options- Fix bug which resulted in truncated files and timeouts for some TFTP transfers- Allow the TFTP-server address in --dhcp-boot to be a domain-name which is looked up in /etc/hosts- Tweak the behaviour of --domain-needed- Add support for Linux conntrack connection marking- Don\'t return NXDOMAIN to an AAAA query if we have CNAME which points to an A record only- logging fixes- many DHCP fixes and features (see Changelog)- update to 2.58
* Wed Mar 02 2011 ugAATTsuse.de- Add IPv6 support to the TFTP server- Log DNS queries at level LOG_INFO- Add --add-mac option- some logging fixes- Don\'t complain about strings longer than 255 characters in txt records- extended the --domain option- Never cache DNS replies which have the \'cd\' bit set- Add --proxy-dnssec flag- Allow a filename of \"-\" for --conf-file- some smaller bugfixes- update to 2.57
* Tue Jun 08 2010 ugAATTsuse.de
* Fix crash when /etc/ethers is in use.
* Fix crash in netlink_multicast().
* Allow the empty domain \".\" in dhcp domain-search (119) options.
* 2.55 (there was no 2.54)
* Mon Jun 07 2010 ugAATTsuse.de
* Fixed bug which caused bad things to happen if a resolv.conf file which exists is subsequently removed
* Rationalised the DHCP tag system
* Added --tag-if to allow boolean operations on tags
* Add broadcast/unicast information to DHCP logging
* Allow --dhcp-broadcast to be unconditional
* Fixed incorrect behaviour with NOT conditionals in dhcp-options
* If we send vendor-class encapsulated options based on the vendor-class supplied by the client, and no explicit vendor-class option is given, echo back the vendor-class from the client.
* Fix bug which stopped dnsmasq from matching both a circuitid and a remoteid
* Add --dhcp-proxy
* Added interface: part to dhcp-range
* and a lot more ... checke the CHANGELOG in the package
* 2.53
* Mon Jan 25 2010 ugAATTsuse.de
* adds support for RFC 3925 vendor identifying vendor options.
* has some minor enhancements to the PXE subsystem and external hooks for tracking DHCP leases.
* 2.52
* Fri Nov 20 2009 ugAATTsuse.de
* Add support for internationalised DNS.
* Add two more environment variables for lease-change scripts: First, DNSMASQ_SUPPLIED_HOSTNAME; this is set to the hostname supplied by a client, even if the actual hostname used is over-ridden by dhcp-host or dhcp-ignore-names directives. Also DNSMASQ_RELAY_ADDRESS which gives the address of a DHCP relay, if used.
* Fix regression which broke echo of relay-agent options. Thanks to Michael Rack for spotting this.
* Don\'t treat option 67 as being interchangeable with dhcp-boot parameters if it\'s specified as dhcp-option-force.
* Make the code to call scripts on lease-change compile-time optional. It can be switched off by editing src/config.h or building with \"make COPTS=-DNO_SCRIPT\".
* Make the TFTP server cope with filenames from Windows/DOS which use \'\\\' as pathname separator. Thanks to Ralf for the patch.
* Warn if an IP address is duplicated in /etc/ethers.
* Teach --conf-dir to take an option list of file suffices which will be ignored when scanning the directory. Useful for backup files etc. Thanks to Helmut Hullen for the suggestion.
* Add new DHCP option named tftpserver-address
* Don\'t do any PXE processing, even for clients with the correct vendorclass, unless at least one pxe-prompt or pxe-service option is given.
* Limit the blocksize used for TFTP transfers to a value which avoids packet fragmentation, based on the MTU of the local interface. Many netboot ROMs can\'t cope with fragmented packets.
* Honour dhcp-ignore configuration for PXE and proxy-PXE requests.
* 2.51
* Tue Nov 03 2009 cooloAATTnovell.com- updated patches to apply with fuzz=0
* Tue Sep 01 2009 ugAATTsuse.de- Fix security problem which allowed any host permitted to do TFTP to possibly compromise dnsmasq by remote buffer overflow when TFTP enabled.- version 2.50
* Tue Jun 16 2009 ugAATTsuse.de- Fix regression in 2.48 which disables the lease-change script- version 2.49
* Fri Jun 05 2009 ugAATTsuse.de-Fixed bug which broke binding of servers to physical interfaces when interface names were longer than four characters.- Fixed netlink code- Don\'t read included configuration files more than once- Mark log messages from the various subsystems in dnsmasq- Fix possible infinite DHCP protocol loop when an IP address nailed to a hostname- Allow --addn-hosts to take a directory- Support --bridge-interface on all platforms- Added support for advanced PXE functions- Improvements to DHCP logging- Added --test command-line switch- version 2.48
* Mon Mar 16 2009 ugAATTsuse.de- dbus documentation added
* Tue Mar 10 2009 ugAATTsuse.de- Enable dbus support by jnelson
* Fri Feb 06 2009 ugAATTsuse.de- Handle duplicate address detection on IPv6 more intelligently- Add DBus introspection- Update Dbus configuration file- Support arbitrarily encapsulated DHCP options- dhcp-option = encap:175, 190, \"iscsi-client0\"- dhcp-option = encap:175, 191, \"iscsi-client0-secret\"- Enhance --dhcp-match to allow testing of the contents of a client-sent option, as well as its presence- No longer complain about blank lines in /etc/ethers- Fix binding of servers to physical devices- Reply to DHCPINFORM requests even when the supplied ciaddr doesn\'t fall in any dhcp-range- Allow the source address of an alias to be a range- version 2.47
* Tue Nov 11 2008 kukukAATTsuse.de- Add /usr/sbin/useradd to PreReq
* Fri Sep 12 2008 mrueckertAATTsuse.de- fix manpage.diff to actually apply- mark files below /etc as config- do not install README.SUSE in %install as %doc will clean the directory anyway.
* Fri Sep 12 2008 ugAATTsuse.de- user dnsmasq moved to group nogroup (bnc#401648)- added README.SUSE- added warning to init script when /etc/ppp is in use since it\'s not readable anymore
* Tue Aug 19 2008 ugAATTsuse.de- init script fixed
* Mon Aug 11 2008 ugAATTsuse.de- Fix crash when unknown client attempts to renew a DHCP lease, problem introduced in version 2.43. Thanks to Carlos Carvalho for help chasing this down.- Fix potential crash when a host which doesn\'t have a lease does DHCPINFORM. Again introduced in 2.43. This bug has never been reported in the wild.- Fix crash in netlink code introduced in 2.43. Thanks to Jean Wolter for finding this.- Change implementation of min_port to work even if min-port as large.- 2.4.45
* Mon Jul 14 2008 ugAATTsuse.de- This release fixes the DNS spoofing vulnerabilities announced in CERT VU#800113. It adds source port randomization for communication with upstream nameservers and replaces the C library PRNG with stronger code. It makes failure to drop root privileges a hard error (previous versions would log the error and continue, running as root.) Other changes include an update to avoid triggering Linux kernel messages about an out-of-date capabilities ABI, support for NAPTR records, and RFC 5107 server-id-override.- 2.43
* Thu Jun 19 2008 ugAATTsuse.de- running as user dnsmasq now (bnc#401643)
* Thu Jun 05 2008 ugAATTsuse.de
* Add --dhcp-alternate-port option. Thanks to Jan Psota for the suggestion.
* Updated Polish translations - thank to Jan Psota.
* Provide --dhcp-bridge on all BSD variants.
* Define _LARGEFILE_SOURCE which removes an arbitrary 2GB limit on logfiles. Thanks to Paul Chambers for spotting the problem.
* Fix RFC3046 agent-id echo code, broken for many releases. Thanks to Jeremy Laine for spotting the problem and providing a patch.
* Add --dhcp-scriptuser option.
* Support new capability interface on suitable Linux kernels, removes \"legacy support in use\" messages. Thanks to Jorge Bastos for pointing this out.
* Fix subtle bug in cache code which could cause dnsmasq to lock spinning CPU in rare circumstances. Thanks to Alex Chekholko for bug reports and help debugging.
* Support netascii transfer mode for TFTP.- 2.42
* Wed Feb 13 2008 ugAATTsuse.de- Allow the DNS function to be completely disabled, by setting the port to zero \"--port=0\"- Fix a bug where NXDOMAIN could be returned for a query even if the name\'s value was known for a different query type.- Fixed possible crash bug in DBus IPv6 code- Add --dhcp-no-override option- Add --tftp-port-range option- Add --stop-dns-rebind option- Added --all-servers option- Add --dhcp-optsfile option- Fixed broken --alias functionality- Add --dhcp-match flag- Added --dhcp-broadcast, to force broadcast replies- multiple bugs fixed- 2.41
* Fri Jan 04 2008 crrodriguezAATTsuse.de- bzip tarball- use find_lang macro.
* Thu Dec 06 2007 ugAATTsuse.de- version 2.40- Fix handling of fully-qualified names in --dhcp-host- Fixed error in manpage- Fixed misaligned memory access which caused problems on Blackfin CPUs- lots of new options (see changelog for details)
* Wed May 02 2007 ugAATTsuse.de- version 2.39- names like \"localhost.\" in /etc/hosts with trailing period are treated as fully-qualified.- Tolerate and ignore spaces around commas in the configuration file in all circumstances- /a is no longer a valid escape in quoted strings.- Added symbolic DHCP option names- Overhauled the log code- --log-facility can now take a file-name- Added --log-dhcp flag- Added 127.0.0.0/8 and 169.254.0.0/16 to the address ranges affected by --bogus-priv- Fixed failure of TFTP server with --listen-address- Added --dhcp-circuitid and --dhcp-remoteid for RFC3046- Added --dhcp-subscrid for RFC3993 subscriber-id relay- Corrected garbage-collection- Allow absolute paths for TFTP transfers even when - -tftp-root is set, as long as the path matches the root- Updated translations- Added --interface-name option
* Thu Mar 15 2007 ugAATTsuse.de- SuSEFirewall service files fixed and enhanced
* Tue Mar 06 2007 ugAATTsuse.de- SuSEFirewall service file added
* Tue Feb 13 2007 ugAATTsuse.de- version 2.38 Don\'t send length zero DHCP option 43 and cope with encapsulated options whose total length exceeds 255 octets by splitting them into multiple option 43 pieces. Avoid queries being retried forever when --strict-order is set and an upstream server returns a SERVFAIL error. Thanks to Johannes Stezenbach for spotting this. Fix BOOTP support, broken in version 2.37. Add example dhcp-options for Etherboot. Add \\e (for ASCII ESCape) to the set of valid escapes in config-file strings. Added --dhcp-option-force flag and examples in the configuration file which use this to control PXELinux. Added --tftp-no-blocksize option. Set netid tag \"bootp\" when BOOTP (rather than DHCP) is in use. This makes it easy to customise which options are sent to BOOTP clients. (BOOTP allows only 64 octets for options, so it can be necessary to trim things.) Fix rare hang in cache code, a 2.37 regression. This probably needs an infinite DHCP lease and some bad luck to trigger. Thanks to Detlef Reichelt for bug reports and testing.
* Mon Feb 05 2007 ugAATTsuse.deAdd better support for RFC-2855 DHCP-over-firewire and RFC-4390 DHCP-over-InfiniBand. A good suggestion from Karl Svec. Some efficiency tweaks to the cache code for very large /etc/hosts files. Should improve reverse (address->name) lookups and garbage collection. Thanks to Jan \'RedBully\' Seiffert for input on this. Fix regression in 2.36 which made bogus-nxdomain and DNS caching unreliable. Thanks to Dennis DeDonatis and Jan Seiffert for bug reports. Make DHCP encapsulated vendor-class options sane. Be warned that some conceivable existing configurations using these may break, but they work in a much simpler and more logical way now. Prepending \"vendor:\" to an option encapsulates it in option 43, and the option is sent only if the client-supplied vendor-class substring-matches with the given client-id. Thanks to Dennis DeDonatis for help with this. Apply patch from Jan Seiffert to tidy up tftp.c Add support for overloading the filename and servername fields in DHCP packet. This gives extra option-space when these fields are not being used or with a modern client which supports moving them into options. Added a LIMITS section to the man-page, with guidance on maximum numbers of clients, file sizes and tuning.- version 2.37
* Mon Jan 22 2007 ugAATTsuse.de- version 2.36
* Mon Oct 30 2006 ugAATTsuse.de- version 2.35- better performance on parsing huge /etc/hosts files
* Tue Oct 17 2006 ugAATTsuse.de- version 2.34- Tweak network-determination code- Improve handling of high DNS loads- Fixed intermittent infinite loop when re-reading /etc/ethers after SIGHUP- Provide extra information to the lease-change script- Run the lease change script as root- Add contrib/port-forward/
* which is a script to set up port-forwards using the DHCP lease-change script- Fix unaligned access problem- Fixed problem with DHCPRELEASE- Updated French translation- Upgraded the name hash function in the DNS cache- Added --clear-on-reload flag- Treat a nameserver address of 0.0.0.0 as \"nothing\"- Added Webmin module in contrib/webmin
* Fri Aug 11 2006 ugAATTsuse.de- init-script more LSB conform patch by Matthias Andree
* Mon Aug 07 2006 ugAATTsuse.de- version 2.33- Provide extra information to lease-change script- Fix breakage with some DHCP relay implementations- compilation warning fixes- minor DNS and DHCP fixes and enhancements
* Mon Jun 12 2006 ugAATTsuse.de- version 2.32
* Wed May 17 2006 ugAATTsuse.de- version 2.31
* Wed Jan 25 2006 mlsAATTsuse.de- converted neededforbuild to BuildRequires
* Mon Jan 23 2006 ugAATTsuse.de- Fixed crash when attempting to send a DHCP NAK to a host which believes it has a lease on an unknown network. That bug was invented in 2.25- version 2.26
* Mon Jan 16 2006 ugAATTsuse.de- moved dnsmasq.no to dnsmasq.np see bug #42748
* Mon Jan 16 2006 ugAATTsuse.de- version update to 2.25
* Mon Nov 28 2005 ugAATTsuse.de- version update to 2.24
* Mon Oct 17 2005 ugAATTsuse.de- \"-fno-strict-aliasing\" now
* Wed Oct 12 2005 ugAATTsuse.de- version update to 2.23
* Wed Aug 24 2005 ugAATTsuse.de- Fix DNS query forwarding for empty queries and forward queries even when the recursion-desired bit is clear. This allows \"dig +trace\" to work Bug #106717
* Fri Aug 05 2005 cthielAATTsuse.de- update to version 2.22
* Wed Apr 13 2005 mlsAATTsuse.de- fix slp registration
* Mon Jan 24 2005 ugAATTsuse.de- version update from 2.19 to 2.20- Allow more than one instance of dnsmasq to run on a machine, each providing DHCP service on a different interface- Protect against overlong names and overlong labels in configuration and from DHCP.- Fix interesting corner case in CNAME handling. This occurs when a CNAME has a target which \"shadowed\" by a name in /etc/hosts or from DHCP- Added support for SRV records- Fixed sign confusion in the vendor-id matching code- Added the ability to match the netid tag in a dhcp-range- Added preference values for MX records- Added the --localise-queries option.
* Fri Jan 21 2005 ugAATTsuse.de- version update to 2.19- minor fixes in IPV6 and DHCP Code
* Fri Nov 26 2004 ugAATTsuse.de- version update to 2.18- lots of DHCP fixes- some IPV6 fixes
* Fri Nov 19 2004 ugAATTsuse.de- SLP support via /etc/slp.reg.d/dnsmasq.reg file added
* Fri Aug 20 2004 ugAATTsuse.de- version update from 2.11 to 2.13- Added extra checks to ensure that DHCP created DNS entries cannot generate multiple DNS address->name entries.- Don\'t set the the filterwin2k option in the example config file and add warnings that is breaks Kerberos.- Log types of incoming queries as well as source and domain.- Log NODATA replies generated as a result of the filterwin2k option.
* Mon Aug 09 2004 ugAATTsuse.de- version update from 2.8 to 2.11
* Tue Jun 01 2004 ugAATTsuse.de- chgrp to \"dialout\" and not to \"dip\"- backward compatibility turned off
* Mon May 24 2004 ugAATTsuse.de- added to distribution