Changelog for libmilter1_0-8.18.1-lp155.370.8.x86_64.rpm :

* Mon Feb 26 2024 Dominique Leuenberger - Use %patch -P N instead of deprecated %patchN.
* Mon Feb 05 2024 Dr. Werner Fink - Update to version sendmail 8.18.1 2024/01/31
* sendmail is now stricter in following the RFCs and rejects some invalid input with respect to line endings and pipelining: - Prevent transaction stuffing by ensuring SMTP clients wait for the HELO/EHLO and DATA response before sending further SMTP commands. This can be disabled using the new srv_features option \'F\'. Issue reported by Yepeng Pan and Christian Rossow from CISPA Helmholtz Center for Information Security. - Accept only CRLF . CRLF as end of an SMTP message as required by the RFCs, which can disabled by the new srv_features option \'O\'. - Do not accept a CR or LF except in the combination CRLF (as required by the RFCs). These checks can be disabled by the new srv_features options \'U\' and \'G\', respectively. In this case it is suggested to use \'u2\' and \'g2\' instead so the server replaces offending bare CR or bare LF with a space. It is recommended to only turn these protections off for trusted networks due to the potential for abuse.
* Full DANE support is available if OpenSSL versions 1.1.1 or 3.x are used, i.e., TLSA RR 2-x-y and 3-x-y are supported as required by RFC 7672.
* OpenSSL version 3.0.x is supported. Note: OpenSSL 3 loads by default an openssl.cnf file from a location specified in the library which may cause unwanted behaviour in sendmail. Hence sendmail sets the environment variable OPENSSL_CONF to /etc/mail/sendmail.ossl to override the default. The file name can be changed by defining confOPENSSL_CNF in the mc file; using an empty value prevents setting OPENSSL_CONF. Note: referring to a file which does not exist does not cause an an error.
* Two new values have been added for {verify}: \"DANE_TEMP\": DANE verification failed temporarily. \"DANE_NOTLS\": DANE was required but STARTTLS was not offered by the server. The default rules return a temporary error for these cases, so delivery is not attempted.
* If the TLS setup code in the client fails and DANE requirements exist then {verify} will be set to \"DANE_TEMP\" thus preventing delivery by default.
* DANE related logging has been slightly changed for clarification: \"DANE configured in DNS but no STARTTLS available\" changed to \"DANE configured in DNS but STARTTLS not offered\"
* When the compile time option USE_EAI is enabled, vacation could fail to respond when it should (the code change in 8.17.2 was incomplete). Problem reported by Alex Hautequest.
* If SMTPUTF8 BODY=7BIT are used as parameters for the MAIL command the parsing of UTF8 addresses could fail (USE_EAI).
* If a reply to a previous RCPT was received while sending another RCPT in pipelining mode then parts of the reply could have been assigned to the wrong RCPT.
* New DontBlameSendmail option CertOwner to relax requirement for certificate public and private key ownership. Based on suggestion from Marius Strobl of the FreeBSD project.
* clt_features was not checked for connections via Unix domain sockets.
* CONFIG: FEATURE(`enhdnsbl\') did not handle multiple replies from DNS lookups thus potentially causing random \"false negatives\". Note: the fix creates an incompatibility: the arguments must not have a trailing dot anymore because the -a. option has been removed (as it only applies to the entire result, not individual values).
* CONFIG: New FEATURE(`fips3\') for basic FIPS support in OpenSSL 3.
* VACATION: Add support for Return-Path header to set sender to match OpenBSD and NetBSD functionality.
* VACATION: Honor RFC3834 and avoid an auto-reply if \'Auto-Submitted: no\' is found in the headers to match OpenBSD and NetBSD functionality.
* VACATION: Avoid an auto-reply if a \'List-Id:\' is found in the headers to match OpenBSD functionality.
* VACATION: Add support for $SUBJECT in .vacation.msg which is replaced with the first line of the subject of the original message to match OpenBSD and NetBSD functionality.
* New Files: cf/feature/fips3.m4 devtools/OS/Darwin.23.x- This release fixes CVE-2023-51765 (bsc#1218351)- Port and rename patch sendmail-8.17.2.dif which is now sendmail-8.18.1.dif
* Tue Jan 30 2024 Dr. Werner Fink - Correct permisson files path to /usr/share/permissions/permissions.d/ (boo#1219339)
* Tue Jan 30 2024 Dr. Werner Fink - Fix file provides of openssl and timeout
* Thu Jan 25 2024 Dr. Werner Fink - Avoid error messages of chkstat as this tools does not accept slashes at the end of directory paths!- Move sendmails permissions files to /usr/share/permissions/
* Wed Jan 17 2024 Dr. Werner Fink - Work on certificates usage of smart and relay host- Work on certificates for running sendmail
* Mon Dec 18 2023 Dr. Werner Fink - There is no such beast called var-run.mount anymore
* Fri Jun 23 2023 Dr. Werner Fink - Update to pre version sendmail 8.17.2
* Make sure DANE checks (if enabled) are performed even if CACertPath or CACertFile are not set or unusable.
* Note: if the code to set up TLS in the client fails, then {verify} will be set to TEMP but DANE requirements will be ignored, i.e., by default mail will be sent without STARTTLS. This can be changed via a LOCAL_TLS_SERVER ruleset.
* Pass server name to clt_features ruleset instead of client name to account for limitations in macro availability described below in CONFIG section. This may break custom clt_features rulesets which expect to receive the client name as input.
* Fix a regression introduced in 8.17.1: aliases file which contain continuation lines caused parsing errors.
* Add an FFR (for future release) compile time option _FFR_LOG_STAGE to log the protocol stage as stage= for some errors during delivery attempts to make troubleshooting simpler. This new logging may be enabled in a future release.
* When EAI is enabled, milters also got the arguments of MAIL/RCPT commands in argv[0] for xxfi_envfrom()/xxfi_envrcpt() callbacks instead of just the mail address. Problem reported by Dilyan Palauzo.
* When EAI is enabled, mailq prints UTF-8 addresses as such if SMTPUTF8 was used.
* When EAI is enabled, the $h macro is now in the correct format. Previously this could cause wrong values for relay= in log entries and the mailer argument vector.
* When the compile time option USE_EAI is enabled, vacation could fail to respond when it should. Problem reported by Alex Hautequest.
* When EAI was enabled, header truncation might not have been logged even when it happened. Problem reported by Werner Wiethege.
* Handle a possible change in an upcoming release of Cyrus-SASL (2.1.28) by changing the definition of an internal flag. Patch from Dilyan Palauzo.
* Avoid an assertion failure when an smtps connection is made to the server and a milter is unavailable. Problem reported by Dilyan Palauzo.
* Fixed some spelling errors in documentation and comments, based on a codespell report by Jens Schleusener of fossies.org.
* The result of try_tls is now logged using status= instead of reject=.
* If tls_rcpt rejected the delivery of a recipient then a bogus dsn= entry might have been logged under some circumstances.
* If a server replied with 421 to a RCPT command then a bogus reply= might have been logged.
* When quoting the value for ${currHeader} avoid causing a syntax error (Unbalanced \'\"\') when truncating a header value which is too long. Problem reported by Werner Wiethege.
* Reduce the performance impact of a change introduced in 8.12.9: the default for MaxMimeHeaderLength was set to 2048/1024. Problem reported by Tabata Shintaro of Internet Initiative Japan Inc.
* CONFIG: The default clt_features ruleset tried to access ${server_name} and ${server_addr} which are not set when the ruleset is invoked. Only the server name is available which is passed as an argument.
* CONFIG: Properly quote host variable to prevent cf build breakage when a hostname contains \'dnl\'. Problem reported by Maxim Shalomikhin of Kaspersky.
* DEVTOOLS: Add configure.sh support for BSD\'s mandoc as an alternative man page formatting tool.
* DOC: Document that USAGE is a possible value for {verify}.
* LIBMILTER: The macros for the EOH and EOM callbacks are sent in reverse order which means accessing macros in the EOM callback got the macro for the EOH callback. Store those macros in the expected order in libmilter. Note: this does not affect sendmail because the macros for both callbacks are the same because the message is sent to libmilter after it is completely read by sendmail. Fix and problem report from David Buergin.
* Portability: Make use of IN_LOOPBACK, if defined, to determine if using a loopback address. Patch from Mike Karels of FreeBSD. On Linux use gethostbyname2(3) if glibc 2.19 or newer is used to avoid potential problems with IPv6 lookups. Patch from Werner Wiethege. Add support for Darwin 21 and Darwin 22. Solaris 12 has been renamed to Solaris 11.4, hence adapt a condition for sigwait(2) taking one argument. Patch from John Beck.- Port and rename patch sendmail-8.17.1.dif which is now sendmail-8.17.2.dif
* Thu Jun 01 2023 Werner Fink - Use the bash intrinsic virtual file /dev/tcp/localhost/ to check for MTA port
* Wed May 31 2023 Dr. Werner Fink - Avoid fuser for detecting if sendmail is listen on MTA port
* Tue Feb 14 2023 Dr. Werner Fink - Drop NIS/NISPLUS support for Tumbleweed (boo#1208221)
* Tue Jan 24 2023 Dominique Leuenberger - Fix source URLs: ftp.sendmail.com was restructured and the pub/sendmail directory is now the root directory.
* Tue Jan 24 2023 Dr. Werner Fink - Switch over to https URLs
* Fri Jan 20 2023 Thorsten Kukuk - Fix wrong \"without sysvinit\", don\'t require sysvinit in that case
* Wed Dec 28 2022 Stefan Schubert - Migration of PAM settings to /usr/lib/pam.d.
* Tue Oct 25 2022 Dr. Werner Fink - Remove maybe perilous shell script code from sm-client.pre (boo#1202937)
* Wed Oct 05 2022 Dr. Werner Fink - Use group(mail) and user(mail) only on modern distributions
* Fri Sep 16 2022 Dr. Werner Fink - Do not start sendmail-client as user mail as this one is not allowed to check port smtp aka 25- Fix sm-client.pre script as ports are not only numbers but also alias names
* Fri Sep 16 2022 Dr. Werner Fink - Rework system service unit files
* sendmail-client now use user and group mail which requires
* /etc/mail/system/ becomes readable by all users e.g. mail
* sendmail now uses -bD to avoid a fork, this requires Type=exec- Various bug fixes- Require user and group mail for post and verify scriptlets- Add a %ghost for /run/sendmail whic his created by tmpfile systemd configuration of sendmail
* Tue Sep 06 2022 Ludwig Nussel - Own /var/spool/mail (boo#1179574)
* Thu Jul 14 2022 Dr. Werner Fink - Avoid older alias.db- Avoid that sendmail can not write its pid file- Allow sendmail and its helper like maildrop and procmail to write into the users mail folder
* Tue Feb 01 2022 Dr. Werner Fink - Allow mail delivery below /home again, that is disable \"ProtectHome=read-only\" for now
* Tue Jan 25 2022 Dr. Werner Fink - No snapshots
* Tue Jan 18 2022 Dr. Werner Fink - Update to final version sendmail 8.17.1
* Several potential memory leaks and other similar problems (mostly in error handling code) have been fixed. Problems reported by Tomas Korbar of RedHat.- Port patches to new version
* sendmail-8.14.7-select.dif
* sendmail-8.17.1.dif
* Tue Nov 16 2021 Johannes Segitz - Added hardening to systemd service(s) (bsc#1181400). Modified:
* sendmail-client.service
* sendmail.service
* Tue Jul 06 2021 Dr. Werner Fink - Require libopenssl-1_1-devel on older SLE-11
* Thu Jul 01 2021 Dr. Werner Fink - Re-add \'sysvinit(network)\' build dependency
* Tue Jun 29 2021 Dr. Werner Fink - Use %set_permissions on path /var/spool/clientmqueue/ as well (boo#1187809)
* Fri Jun 25 2021 Dr. Werner Fink - Update to pre version sendmail 8.17.1 (8.17.0.3) (boo#1187688)
* Deprecation notice: due to compatibility problems with some third party code, we plan to finally switch from K&R to ANSI C. If you are using sendmail on a system which does not have a compiler for ANSI C contact us with details as soon as possible so we can determine how to proceed.
* Experimental support for SMTPUTF8 (EAI, see RFC 6530-6533) is available when using the compile time option USE_EAI (see also devtools/Site/site.config.m4.sample for other required settings) and the cf option SMTPUTF8. If a mail submission via the command line requires the use of SMTPUTF8, e.g., because a header uses UTF-8 encoding, but the addresses on the command line are all ASCII, then the new option -U must be used, and the cf option SMTPUTF8 must be set in submit.cf. Please test and provide feedback.
* Experimental support for SMTP MTA Strict Transport Security (MTA-STS, see RFC 8461) is available when using - the compile time option _FFR_MTA_STS (which requires STARTTLS, MAP_REGEX, SOCKETMAP, and _FFR_TLS_ALTNAMES), - FEATURE(sts), which implicitly sets the cf option StrictTransportSecurity, - postfix-mta-sts-resolver, see https://github.com/Snawoot/postfix-mta-sts-resolver.git
* New ruleset check_other which is called for all unknown SMTP commands in the server and for commands which do not have specific rulesets, e.g., NOOP and VERB.
* New ruleset clt_features which can be used to select features in the SMTP client per server. Currently only two flags are available: D/M to disable DANE/MTA-STS, respectively.
* Avoid leaking session macros for an envelope between delivery attempts to different servers. This problem could have affected check_compat.
* Avoid leaking actual SMTP replies between delivery attempts to different servers which could cause bogus logging of reply= entries.
* Change default SMTP reply code for STARTTLS related problems from 403 to 454 to better match the RFCs.
* Fix a theoretical buffer overflow when encountering an unknown/unsupported socket address family on an operating system where sa_data is larger than 30 (the standard is 14). Based on patch by Toomas Soome.
* Previously the commands GET, POST, CONNECT, or USER terminate a connection immediately only if sent as first command. Now this is also done if any of these is sent directly after STARTTLS or if the \'h\' option is set via srv_features.
* CDB map locking has been changed so a sendmail process which does have a CDB map open does not block an in-place update of the map by makemap. The simple workaround for that problem in earlier versions is to create the map under a different name and then move it into place.
* CONFIG: New FEATURE(`check_other\') to provide a default check_other ruleset.
* CONFIG: FEATURE(`tls_failures\') is deprecated and will be removed in future versions because it has a fundamental problem: it is message oriented but STARTTLS is session oriented. For example, having multiple RCPTs in one envelope for different destinations, with different temporary errors, does not work properly, as the persistent macro applies to all RCPTs and hence implicitly to all destinations (servers). The option TLSFallbacktoClear should be used if needed.
* MAIL.LOCAL: Enhance some error messages to simplify troubleshooting.
* Portability: Add support for Darwin 19 & 20. NOTE: File locking using fcntl() does not interoperate with Berkeley DB 5.x (and probably later). Use CDB, flock() (-DHASFLOCK), or an earlier Berkeley DB version. Problem noted by Harald Hannelius.
* New Files: cf/feature/check_other.m4 cf/feature/sts.m4 devtools/OS/Darwin.19.x devtools/OS/Darwin.20.x include/sm/ixlen.h libsm/ilenx.c libsm/lowercase.c libsm/strcaseeq.c libsm/t-ixlen.c libsm/t-ixlen.sh libsm/t-streq.c libsm/t-streq.sh libsm/utf8_valid.c libsm/uxtext_unquote.c libsm/xleni.c libsmutil/t-lockfile.c libsmutil/t-lockfile-0.sh libsmutil/t-maplock-0.sh
* New compile time option NO_EOH_FIELDS to disable the special meaning of the headers Message: and Text: to denote the end of the message header.
* CONTRIB: AuthRealm.p0 has been modified for 8.16.1 by Anne Bennett.
* CONTRIB: Added cidrexpand -O option for suppressing duplicates from a CIDR expansion that overlaps a later entry and -S option for skipping comments exactly like makemap does.
* Portability: Add support for Darwin 19 (Mac OS X 10.15). Use proper FreeBSD version define to allow for cross compiling. Fix from Brooks Davis of the FreeBSD project.
* New Files: devtools/OS/Darwin.19.x- Modify patches
* sendmail-8.14.7-select.dif
* sendmail-fd-passing-libmilter.patch- Modify and renama patch sendmail-8.16.1.dif which is now sendmail-8.17.1.dif- Enable experimental support for SMTPUTF8 as well SMTP MTA Strict Transport Security- Update keyring- Make it build for older products as well
* Fri Jun 04 2021 Callum Farmer - sendmail-suse.tar.bz2: don\'t set /var/spool/mail perms, it is part of filesystem
* Fri May 28 2021 Dr. Werner Fink - sendmail-suse.tar.bz2: add file tmpfile which will be installed in tmpfiles.d as sendmail.conf. With this /run/sendmail will be created at boot.- Fix locations in permissions files to fit _libexecdir change (boo#1186592)
* Thu May 27 2021 Matthias Gerstner - sendmail-suse.tar.bz2: add trailing slash to permissions entries for /var/spool/mail, because it is a directory and `chkstat` expects trailing slashes for directories.
* Sun May 16 2021 Callum Farmer - Remove /var/mail to /var/spool/mail patch
* Tue Mar 23 2021 Dr. Werner Fink - Make IPv6 work even with IPv4 in parallel
* Tue Feb 09 2021 Dominique Leuenberger - Fix up build dependencies. The construct: %%if %%{undefined systemd_requires}\
%%global with_sysvinit 1 does not work as intended. The OBS scheduler for example does not have all the macros coming from \'random\' rpmmacro files/packages (systemd-rpm-macros in this case) present, as such for OBS, systemd_requires is undefined, which in turn pulls in insserv_prereq. The build itself then does not use it though, as at this time, the correct macros are known (inside the build VM).- As we\'re at it: replace systemd_requires with systemd_ordering: people installing sendmail into a container do not require systemd as a dependency there. But for people installing sendmail in a transaction together with systemd, we prefer systemd to be installed first.
* Fri Jan 29 2021 Dr. Werner Fink - Correct path of update script for older products/distributions
* Wed Jan 27 2021 Dr. Werner Fink - Add qtool perl script from contrib as this is very handy- Make GLIBC_VERSION macro work again
* Wed Jan 27 2021 Dr. Werner Fink - Move SMTPD_LISTEN_REMOTE hack into valid code of update script- Change location of update script in fillup/sysconfig files
* Tue Jan 26 2021 Dr. Werner Fink - Add better support for IPv6- Fix bug in udage of fillup_only macro to get sysconfig file for sendmail written by fillup
* Tue Oct 27 2020 Matthias Gerstner - cleanup the sendmail permissions profile: - /var/run/sendmail was last used in SLE-11 with systemv init, is no longer required. - /var/spool/clientmqueue is now owned by the system-user-mail package. Nobody is calling %set_permissions and %verify_permissions on this directory anymore, therefore the permissions entry is useless. - /var/spool/mail is the same for all permissions profiles and also managed by systemd-tmpfiles via the filesystem package (fs-var.conf).
* Thu Oct 08 2020 Matthias Gerstner - adjust permissions.d entries to new %libexedir location (bsc#1171164).
* Tue Jul 28 2020 Dr. Werner Fink - Fix same strange permissions below /usr/share/sendmail
* Tue Jul 28 2020 Dr. Werner Fink - Update to sendmail 8.16.1 2020/07/05 (boo#1174572) SECURITY: If sendmail tried to reuse an SMTP session which had already been closed by the server, then the connection cache could have invalid information about the session. One possible consequence was that STARTTLS was not used even if offered. This problem has been fixed by clearing out all relevant status information when a closed session is encountered. OpenSSL versions before 0.9.8 are no longer supported. OpenSSL version 1.1.0 and 1.1.1 are supported. Initial support for DANE (see RFC 7672 et.al.) is available if the compile time option DANE is set. Only TLSA RR 3-1-x is currently implemented. New options SSLEngine and SSLEnginePath to support OpenSSL engines. Note: this feature has so far only been tested with the \"chil\" engine; please report problems with other engines if you encounter any. New option CRLPath to specify a directory which contains hashes pointing to certificate revocations files. Based on patch from Al Smith. New rulesets tls_srv_features and tls_clt_features which can return a (semicolon separated) list of TLS related options, e.g., CipherList, CertFile, KeyFile, see doc/op/op.me for details. To automatically handle TLS interoperability problems for outgoing mail, sendmail can now immediately try a connection again without STARTTLS after a TLS handshake failure. This can be configured globally via the option TLSFallbacktoClear or per session via the \'C\' flag of tls_clt_features. This also adds the new value \"CLEAR\" for the macro {verify}: STARTTLS has been disabled internally for a clear text delivery attempt. Apply Timeout.starttls also to the server waiting for the TLS handshake to begin. Based on patch from Simon Hradecky. New compile time option TLS_EC to enable the use of elliptic curve cryptography in STARTTLS (previously available as _FFR_TLS_EC). Handle MIME boundaries specified in headers which contain CRLF. Fix detection of loopback net (it was broken when compiled with NETINET6) and only set the macros {if_addr_out} and {if_family_out} if the interface of the outgoing connection does not belong to the loopback net. Fix logic to enable a milter to delete a recipient in DeliveryMode=interactive even if it might be subject to alias expansion. Log name of a milter making changes (this was missing for some functions). Log the actual reply of a server when an SMTP delivery problem occurs in a \"reply=\" field if possible. Log user= for failed AUTH attempts if possible. Based on patch from Packet Hack, Jim Hranicky, Kevin A. McGrail, and Joe Quinn. Add CDB as map type. Note: CDB is a \"Constant DataBase\", i.e., no changes can be made after it is created, hence it does not work with vacation(1) nor editmap(8) (except for query mode). Fix some memory leaks (mostly in error cases) and properly handle copied varargs in sm_io_vfprintf(). The issues were found using Coverity Scan and reported (including patches) by Ondřej Lysoněk of Red Hat. Do not override ServerSSLOptions and ClientSSLOptions when they are specified on the command line. Based on patch from Hiroki Sato. Add RFC7505 Null MX support for domains that declare they do not accept mail. New compile time option LDAP_NETWORK_TIMEOUT which is set automatically when LDAPMAP is used and LDAP_OPT_NETWORK_TIMEOUT is available to enable the new -c option for LDAP maps to specify the network timeout. CONFIG: New FEATURE(`tls_session_features\') to enable standard rules for tls_srv_features and tls_clt_features; for details see cf/README. CONFIG: New options confSSL_ENGINE and confSSL_ENGINE_PATH for SSLEngine and SSLEnginePath, respectively. CONFIG: New options confDANE to enable DANE support. CONFIG: New option confTLS_FALLBACK_TO_CLEAR for TLSFallbacktoClear. CONFIG: New extension CITag: for TLS restrictions, see cf/README for details. CONFIG: FEATURE(`blacklist_recipients\') renamed to FEATURE(`blocklist_recipients\'). CONTRIB: cidrexpand updated to support IPv6 CIDR ranges and to canonicalize IPv6 addresses; if cidrexpand is used with IPv6 addresses then UseCompressedIPv6Addresses must be disabled. DOC: The dns map can return multiple values in a single result if the -z option is used. DOC: Note to set MustQuoteChars=. due to DKIM signatures. LIBMILTER: Fix typo in a macro. Patch from Ignacio Goyret of Alcatel-Lucent. LIBMILTER: Fix reference in xxfi_negotiate documentation. Patch from Sven Neuhaus. LIBMILTER: Fix function name in smfi_addrcpt_par documentation. Patch from G.W. Haywood. LIBMILTER: Fix a potential memory leak in smfi_setsymlist(). Patch from Martin Svec. MAKEMAP: New map type \"implicit\" refers to the first available type, i.e., it depends on the compile time options NEWDB, DBM, and CDB. This can be used in conjunction with the \"implicit\" map type in sendmail.cf. Note: makemap, libsmdb, and sendmail must be compiled with the same options (and library versions of course). Portability: Add support for Darwin 14-18 (Mac OS X 10.x). New option HAS_GETHOSTBYNAME2: set if your system supports gethostbyname2(2). Set SM_CONF_SEM=2 for FreeBSD 12 and later due to changes in sys/sem.h On Linux set MAXHOSTNAMELEN (the maximum length of a FQHN) to 256 if it is less than that value. Added Files: cf/feature/blocklist_recipients.m4 cf/feature/tls_failures.m4 devtools/OS/Darwin.14.x devtools/OS/Darwin.15.x devtools/OS/Darwin.16.x libsmdb/smcdb.c sendmail/ratectrl.h- Add upstream keyring and verify source signature- Use DANE and TLS_EC- Remove obsolete patches now solved upstream
* 8.15.2.mci.p0
* sendmail-8.15.2-glibc-2.30.patch
* sendmail-8.15.2-openssl-1.1.0-ecdhe-fix.patch
* sendmail-8.15.2-openssl-1.1.0-fix.patch- Port patches
* sendmail-8.14.7-select.dif
* sendmail-fd-passing-libmilter.patch- Port and rename patch sendmail-8.15.2.dif which is now sendmail-8.16.1.dif
* Tue Jun 23 2020 Callum Farmer - Fixes for %_libexecdir changing to /usr/libexec- Spec file cleanups
* Wed Jun 10 2020 Matthias Gerstner - sendmail-suse.tar.bz2: fix rpmlint warning W: permissions-dir-without-slash for /var/spool/clientmqueue. This wasn\'t noticed before, because the directory is not packaged by sendmail but by system-user-mail.
* Thu Jan 30 2020 Dr. Werner Fink - Add upstream patch 8.15.2.mci.p0 (boo#1164084)
* If sendmail tried to reuse an SMTP session which had already been closed by the server, then the connection cache could have invalid information about the session. One possible consequence was that STARTTLS was not used even if offered.
* Thu Dec 19 2019 Dominique Leuenberger - BuildRequire pkgconfig(libsystemd) instead of systemd-devel: Allow OBS to shortcut through the -mini flavors.
* Mon Oct 14 2019 Dr. Werner Fink - Avoid recursion trouble in spec file cause by undefined _lto_cflags
* Sat Sep 28 2019 Dr. Werner Fink - Add patch sendmail-8.15.2-glibc-2.30.patch
* The former deprecated macro RES_USE_INET6 is gone with glibc 2.30
* Mon Sep 09 2019 Dr. Werner Fink - Use FAT LTO objects in order to provide proper static library.
* Fri Jul 26 2019 matthias.gerstnerAATTsuse.com- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html
* Fri Jan 04 2019 Dr. Werner Fink - Remove alias to mail-transfer-agent.target (boo#1116675)
* Fri Jul 27 2018 jengelhAATTinai.de- Replace exec rm by delete/print.
* Mon Jul 16 2018 wernerAATTsuse.de- Remove left over from last patch- Group daemon is required
* Tue Dec 05 2017 bwiedemannAATTsuse.com- Add sendmail-8.15.2-reproducible.patch to make package build reproducible
* Wed Nov 29 2017 wernerAATTsuse.de- Add _FFR_TLS_EC m4 macro definition for site configuration as well (boo#1070065)
* Thu Nov 23 2017 rbrownAATTsuse.com- Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)
* Thu Nov 09 2017 wernerAATTsuse.de- Apply former patches only if openssl 1.1.0+ are installed
* Wed Nov 08 2017 vcizekAATTsuse.com- support build with openssl 1.1 (bsc#1067222)
* add patches from Fedora: sendmail-8.15.2-openssl-1.1.0-fix.patch sendmail-8.15.2-openssl-1.1.0-ecdhe-fix.patch (rh#1473971)
* Thu Aug 17 2017 kukukAATTsuse.de- Add libnsl-devel build requires for glibc obsoleting libnsl
* Wed Jul 19 2017 wernerAATTsuse.de- Change requirements for libmilter and sendmail-devel as the library is also used by other MTA like postfix (boo#1049188)
* Thu May 11 2017 wernerAATTsuse.de- Require user and group mail
* Wed Apr 12 2017 wernerAATTsuse.de- Add bitdomain and uudomain to possible targets for refresh
* Wed Apr 12 2017 wernerAATTsuse.de- Change spec file name scheme used for getting soname down into libmilter
* Tue Apr 11 2017 jengelhAATTinai.de- Replace a find|xargs rm by -delete
* Thu Mar 23 2017 wernerAATTsuse.de- New package libmilter1_0 for the shared library version of libmilter, the Sendmail Content Management API- Also new package libmilter-doc for the substantial documentation about Sendmail Content Management API (milter)- Make sendmail-tls a noarch package
* Mon Mar 06 2017 wernerAATTsuse.de- Require m4 at build time
* Mon Feb 20 2017 kukukAATTsuse.de- Don\'t use insserv together with systemd
* Mon Sep 26 2016 wernerAATTsuse.de- Use _unitdir macro instead asking pkg config of systemd
* Tue Jul 19 2016 dimstarAATTopensuse.org- Fix License: Even https://spdx.org/licenses/Sendmail.html lists \"Sendmail\" as the valid identifier. Same as http://license.opensuse.org/ does. \"Sendmail License\" is in the column \"Full Name\". The License: tag requires the identifier.- Fix some more rpmlint warnings: + sendmail: W: suse-missing-rclink sendmail: - Ship /usr/sbin/rcsendmail symlink to /usr/sbin/service + sendmail: W: suse-missing-rclink sendmail-client - Ship /usr/sbin/rcsendmail-client symlink to /usr/sbin/service + sendmail: W: suse-wrong-suse-capitalisation: - Rename README.SuSE to README.SUSE (fix spelling also inside the file). + sendmail: W: permissions-dir-without-slash - Fix permissions and permissions.paranoid inside sendmail-suse.tar.bz2. + sendmail: W: systemd-service-without-service_del_postun: - Add corresponding macros to postun script when not building with sysvinit support. + sendmail: W: systemd-service-without-service_add_pre: - Add corresponding macros to pre script when not building with sysvinit support.
* Thu Jun 16 2016 tchvatalAATTsuse.com- Drop unused patch:
* sendmail-8.14.7-warning.patch
* Thu Jun 16 2016 tchvatalAATTsuse.com- Split uucp to separate package, no technical reason for it to not stand on its own- Drop uucp related patches: + uucp-1.07-contrib.dif + uucp-1.07-cu.patch + uucp-1.07-grade.patch + uucp-1.07-lockdev.patch + uucp-1.07.dif + uucp-texinfo-5.0.patch + drop_ftime.patch
* Thu May 19 2016 wernerAATTsuse.de- Do not use http://license.opensuse.org/ as reference for the Sendmail license even if stated by rpmlint but https://spdx.org/licenses/Sendmail.html
* Thu Apr 14 2016 wernerAATTsuse.de- Avoid warning from chkstat due slash on directory path as last character
* Thu Apr 14 2016 wernerAATTsuse.de- Update to sendmail 8.15.2 (boo#975416)
* If FEATURE(`nopercenthack\') is used then some bogus input triggered a recursion which was caught and logged as SYSERR: rewrite: excessive recursion (max 50) ... Fix based on patch from Ondrej Holas.
* DHParameters now by default uses an included 2048 bit prime. The value \'none\' previously caused a log entry claiming there was an error \"cannot read or set DH parameters\". Also note that this option applies to the server side only.
* The U= mailer field didn\'t accept group names containing hyphens, underbars, or periods. Based on patch from David Gwynne of the University of Queensland.
* CONFIG: Allow connections from IPv6:0:0:0:0:0:0:0:1 to relay again. Patch from Lars-Johan Liman of Netnod Internet Exchange.
* CONFIG: New option UseCompressedIPv6Addresses to select between compressed and uncompressed IPv6 addresses. The default value depends on the compile-time option IPV6_FULL: For 1 the default is False, for 0 it is True, thus preserving the current behaviour. Based on patch from John Beck of Oracle.
* CONFIG: Account for IPv6 localhost addresses in FEATURE(`block_bad_helo\'). Suggested by Andrey Chernov from FreeBSD and Robert Scheck from the Fedora Project.
* CONFIG: Account for IPv6 localhost addresses in check_mail ruleset.
* LIBMILTER: Deal with more invalid protocol data to avoid potential crashes. Problem noted by Dimitri Kirchner.
* LIBMILTER: Allow a milter to specify an empty macro list (\"\", not NULL) in smfi_setsymlist() so no macro is sent for the selected stage.
* MAKEMAP: A change to check TrustedUser in fewer cases which was made in 2013 caused a potential regression when makemap was run as root (which should not be done anyway).
* SECURITY: Properly set the close-on-exec flag for file descriptors (except stdin, stdout, and stderr) before executing mailers.
* If header rewriting fails due to a temporary map lookup failure, queue the mail for later retry instead of sending it without rewriting the header. Note: this is done while the mail is being sent and hence the transaction is aborted, which only works for SMTP/LMTP mailers hence the handling of temporary map failures is suppressed for other mailers. SMTP/LMTP servers may complain about aborted transactions when this problem occurs. See also \"DNS Lookups\" in sendmail/TUNING.
* Incompatible Change: Use uncompressed IPv6 addresses by default, i.e., they will not contain \"::\". For example, instead of ::1 it will be 0:0:0:0:0:0:0:1. This permits a zero subnet to have a more specific match, such as different map entries for IPv6:0:0 vs IPv6:0. This change requires that configuration data (including maps, files, classes, custom ruleset, etc) must use the same format, so make certain such configuration data is updated before using 8.15. As a very simple check search for patterns like \'IPv6:[0-9a-fA-F:]
*::\' and \'IPv6::\'. If necessary, the prior format can be retained by compiling with: APPENDDEF(`conf_sendmail_ENVDEF\', `-DIPV6_FULL=0\') in your devtools/Site/site.config.m4 file.
* If a connection to the MTA is dropped by the client before its hostname can be validated, treat it as \"may be forged\", so that the unvalidated hostname is not passed to a milter in xxfi_connect().
* Add a timeout for communication with socket map servers which can be specified using the -d option.
* Add a compile time option HESIOD_ALLOW_NUMERIC_LOGIN to allow numeric logins even if HESIOD is enabled. - sendmail 8.15.1
* The new option CertFingerprintAlgorithm specifies the finger- print algorithm (digest) to use for the presented cert. If the option is not set, md5 is used and the macro {cert_md5} contains the cert fingerprint. However, if the option is set, the specified algorithm (e.g., sha1) is used and the macro {cert_fp} contains the cert fingerprint. That is, as long as the option is not set, the behaviour does not change, but otherwise, {cert_md5} is superseded by {cert_fp} even if you set CertFingerprintAlgorithm to md5.
* The options ServerSSLOptions and ClientSSLOptions can be used to set SSL options for the server and client side respectively. See SSL_CTX_set_options(3) for a list. Note: this change turns on SSL_OP_NO_SSLv2 and SSL_OP_NO_TICKET for the client. See doc/op/op.me for details.
* The option CipherList sets the list of ciphers for STARTTLS. See ciphers(1) for possible values.
* Do not log \"STARTTLS: internal error: tls_verify_cb: ssl == NULL\" if a CRLFfile is in use (and LogLevel is 14 or higher.)
* Store a more specific TLS protocol version in ${tls_version} instead of a generic one, e.g., TLSv1 instead of TLSv1/SSLv3.
* Properly set {client_port} value on little endian machines. Patch from Kelsey Cummings of Sonic.net.
* Per RFC 3848, indicate in the Received: header whether SSL or SMTP AUTH was negotiated by setting the protocol clause to ESMTPS, ESMTPA, or ESMTPSA instead of ESMTP.
* If the \'C\' flag is listed as TLSSrvOptions the requirement for the TLS server to have a cert is removed. This only works under very specific circumstances and should only be used if the consequences are understood, e.g., clients may not work with a server using this.
* The options ClientCertFile, ClientKeyFile, ServerCertFile, and ServerKeyFile can take a second file name, which must be separated from the first with a comma (note: do not use any spaces) to set up a second cert/key pair. This can be used to have certs of different types, e.g., RSA and DSA.
* A new map type \"arpa\" is available to reverse an IP (IPv4 or IPv6) address. It returns the string for the PTR lookup, but without trailing {ip6,in-addr}.arpa.
* New operation mode \'C\' just checks the configuration file, e.g., sendmail -C new.cf -bC will perform a basic syntax/consistency check of new.cf.
* The mailer flag \'I\' is deprecated and will be removed in a future version.
* Allow local (not just TCP) socket connections to the server, e.g., O DaemonPortOptions=Family=local, Addr=/var/mta/server.sock can be used.
* If the new option MaxQueueAge is set to a value greater than zero, entries in the queue will be retried during a queue run only if the individual retry time has been reached which is doubled for each attempt. The maximum retry time is limited by the specified value.
* New DontBlameSendmail option GroupReadableDefaultAuthInfoFile to relax requirement for DefaultAuthInfo file.
* Reset timeout after receiving a message to appropriate value if STARTTLS is in use. Based on patch by Kelsey Cummings of Sonic.net.
* Report correct error messages from the LDAP library for a range of small negative return values covering those used by OpenLDAP.
* Fix compilation with Berkeley DB 5.0 and 6.0. Patch from Allan E Johannesen of Worcester Polytechnic Institute.
* CONFIG: FEATURE(`nopercenthack\') takes one parameter: reject or nospecial which describes whether to disallow \"%\" in the local part of an address.
* DEVTOOLS: Fix regression in auto-detection of libraries when only shared libraries are available. Problem reported by Bryan Costales.
* LIBMILTER: Mark communication socket as close-on-exec in case a user\'s filter starts other applications. Based on patch from Paul Howarth.- Modified patches sendmail-8.14.9.dif becomes sendmail-8.15.2.dif sendmail-8.14.7-select.dif sendmail-8.14.8-m4header.patch sendmail-fd-passing-libmilter.patch Removed patches sendmail-db6.diff sendmail-8.14.7-warning.patch
* Tue Dec 01 2015 wernerAATTsuse.de- Do not enforce dependencies like for amavis and saslauthd