Changelog for anaconda-debuginfo-13.21.263-1.el6.sme.1.x86_64.rpm :

* Sat Apr 08 2017 Jean-Philippe Pialasse - 13.21.263-1.sme.1- Rebase on upstream 13.21.263-1 [SME: 10214]- anaconda translation should not refer to a release of SME9 [SME: 10153]
* Tue Mar 21 2017 Johnny Hughes - 13.21.263-1- Rebase to CentOS-6.9
* Mon Feb 13 2017 Radek Vykydal - 13.21.263-1- network: don\'t reactivate devices from linuxrc.s390 in loader only for IPv6 (rvykydal) Resolves: rhbz#1421039
* Tue Jan 03 2017 Radek Vykydal - 13.21.262-1- Remove more firmware from ppc image (rvykydal) Related: rhbz#1405089 Resolves: rhbz#1405089
* Fri Dec 16 2016 Radek Vykydal - 13.21.261-1- Remove 3com and bnx2 firmware to meet ppc64 image limit (rvykydal) Related: rhbz#1405089 Resolves: rhbz#1405089
* Thu Dec 15 2016 Samantha N. Bueno - 13.21.260-1- Fix ppc image being too big againagainagainagainagain (sbueno+anaconda) Resolves: rhbz#1405089
* Mon Dec 12 2016 Radek Vykydal - 13.21.259-1- network: don\'t reactivate devices from linuxrc.s390 for early networking (rvykydal) Resolves: rhbz#1329171- Create lvm.conf with thin_
* path overrides (mkolman) Resolves: rhbz#1350296
* Thu Dec 08 2016 Radek Vykydal - 13.21.258-1- Fix invalid characters in an installed package summary (vponcova) Resolves: rhbz#1324706
* Mon Nov 28 2016 Radek Vykydal - 13.21.257-1- Fix wrong attribute of AnacondaYumRepo (vponcova) Resolves: rhbz#1395076
* Mon Nov 07 2016 Radek Vykydal - 13.21.256-1- Fix the basis for percentage-based growth of LVs. (dlehman) Resolves: rhbz#1383817
* Fri Oct 21 2016 Radek Vykydal - 13.21.255-1- Keep symlinks to thin_
* tools in /sbin (mkolman) Resolves: rhbz#1350296- network: fix static ipv6 config with static gateway (rvykydal) Resolves: rhbz#1177984- Run efibootmgr for only one device in multipath (jkonecny) Resolves: rhbz#1346725- Adjust the fraction of the progress bar (vponcova) Resolves: rhbz#1324706- network: take into account NICs activated in linuxrc.s390 (rvykydal) Resolves: rhbz#1329171 Related: rhbz#1329171- network: don\'t crash on network devices configured in linuxrc.s390 (rvykydal) Resolves: rhbz#1329171
* Mon Apr 11 2016 Samantha N. Bueno - 13.21.254-1- Revert \"Always write splashimage to grub.cfg on UEFI (bcl)\" Related: rhbz#1325971 Resolves: rhbz#1325971
* Fri Apr 08 2016 Samantha N. Bueno - 13.21.253-1- Complete support for mesa-libEGL in upd-instroot (sbueno+anaconda) Resolves: rhbz#1316646
* Tue Mar 29 2016 Samantha N. Bueno - 13.21.252-1- Add mesa-libEGL to upd-instroot. (sbueno+anaconda) Resolves: rhbz#1316646- Catch KeyError when checking for MD UUID in filter gui. (dlehman) Related: rhbz#1269872 Resolves: rhbz#1320545- Activate also non-ibft devices requested by boot options (ksdevice) (rvykydal) Resolves: rhbz#1314806
* Tue Mar 22 2016 Samantha N. Bueno - 13.21.251-1- Adjust commit 74014d71 after recent reverts. (dlehman) Related: rhbz#1269872- Revert \"Refactor variable name (sbueno+anaconda)\" Resolves: rhbz#1319697- Revert \"Fix multipath UI representation (sbueno+anaconda)\" Resolves: rhbz#1319697- Revert \"Bios RAID traceback on Filter GUI (sbueno+anaconda)\" Resolves: rhbz#1319697- Add the /EFI directory to the boot.iso (bcl) Resolves: rhbz#1188876- Clean up devicetree filtering of md containers. (dlehman) Related: rhbz#1120640 Related: rhbz#1269872- Remove pyblock/dmraid remnants from md container handling. (dlehman) Related: rhbz#1269872- Don\'t use pyblock/dmraid to get sizes of imsm/isw arrays. (dlehman) Resolves: rhbz#1269872- Move mdadm.conf entry creation to a function. (dlehman) Related: rhbz#1269872- network: disable NM for parent device of vlan configured in ibft (rvykydal) Resolves: rhbz#831002- network: set ifname= for parent of vlan defined in ibft (rvykydal) Resolves: rhbz#831002
* Mon Mar 14 2016 Samantha N. Bueno - 13.21.250-1- Create ibft vlan ifcfg file in stage2 if needed (rvykydal) Resolves: rhbz#831002
* Tue Mar 08 2016 Samantha N. Bueno - 13.21.249-1- Bios RAID traceback on Filter GUI (rmarshall) Resolves: rhbz#1309069- Don\'t ignore FW RAID containers if everything should be used (vpodzime) Related: rhbz#1120640- Fix pki cert path in initrd (bcl) Resolves: rhbz#1259880
* Mon Feb 22 2016 Samantha N. Bueno - 13.21.248-1- Wait for all udev events to finish (jstodola) Resolves: rhbz#1309348- Run restorecon on /etc/localtime to reset SElinux context. (sbueno+anaconda) Resolves: rhbz#1302290
* Tue Feb 16 2016 Samantha N. Bueno - 13.21.247-1- Make sure devices configured by NM from iBFT have correct ifcfg (rvykydal) Resolves: rhbz#831002 Related: rhbz#831002
* Fri Feb 05 2016 Samantha N. Bueno - 13.21.246-1- Fix the problem of ppc img being too large (sbueno+anaconda) Resolves: rhbz#1303855
* Thu Jan 21 2016 Samantha N. Bueno - 13.21.245-1- Add support for vlan id in iBFT (rvykydal) Resolves: rhbz#831002
* Wed Jan 20 2016 Samantha N. Bueno - 13.21.244-1- Keep \'wipefs\' in the installation environment (vpodzime) Resolves: rhbz#835865- Handle hostname and dns setting properly in loader (sbueno+anaconda) Resolves: rhbz#1214266- Addon repos should still be added to anaconda-ks.cfg. (clumens) Resolves: rhbz#1099178- Only write defaultList of filtered kernel entries to /etc/zipl.conf (sbueno+anaconda) Resolves: rhbz#1256211- Increase default loglevel of NetworkManager. (sbueno+anaconda) Resolves: rhbz#831777- Increase default logging of yum. (sbueno+anaconda) Resolves: rhbz#831777- Fix multipath UI representation (rmarshall) Resolves: rhbz#914637 Related: rhbz#1014425- Refactor variable name (rmarshall) Related: rhbz#914637 Resolves: rhbz#914637
* Fri Jan 15 2016 Samantha N. Bueno - 13.21.243-1- Ignore MD RAID containers if all their devices are ignored (vpodzime) Resolves: rhbz#1120640- Fix --noipv4 option in case of multiple ks network commands (rvykydal) Resolves: rhbz#1011595 Related: rhbz#1011595- Fix regression in lvm snapshot detection. (dlehman) Resolves: rhbz#1295897
* Thu Jan 07 2016 Samantha N. Bueno - 13.21.242-1- Make iutil.execWithCallback honor root option. (sbueno+anaconda) Resolves: rhbz#883054- Change parameter at ks.cfg for fcoe as --nic= (jkonecny) Resolves: rhbz#1225877- Fix IPoIB interfaces are shown as Ethernet (jkonecny) Resolves: rhbz#1116633- Add support for ipv6 to gateway boot option (rvykydal) Resolves: rhbz#1177984- Create symlink for NM ibft plugin rather then relocate iscsiadm (rvykydal) Resolves: rhbz#831002 Related: rhbz#831002- Fixed IndexError in cleardisks_gui.py (japokorn) Resolves: rhbz#1224413- Fix layout of \"Add FCoE SAN\" dialog in text and rescue mode (rvykydal) Resolves: rhbz#1211931 Related: rhbz#1211931- Fix crash on \"Add FCoE SAN\" in text and rescue (rvykydal) Resolves: rhbz#1211931- network: add support for vlan over bond boot option (rvykydal) Resolves: rhbz#1011595- fcoe: take into account vlan device names trimmed to IFNAMSIZ (rvykydal) Resolves: rhbz#1021067- Add possibility to have /usr and /var parts on iscsi (jkonecny) Resolves: rhbz#856446
* Mon Dec 14 2015 Samantha N. Bueno - 13.21.241-1- Prevent duplicate kernel params being written in zipl.conf (sbueno+anaconda) Resolves: rhbz#1029505- Skip kickstart sections in loader (bcl) Resolves: rhbz#1251300- Always write splashimage to grub.cfg on UEFI (bcl) Resolves: rhbz#853844- Install ca-bundle certs in the initrd (bcl) Resolves: rhbz#1259880- zerombr propagates to anaconda-ks (japokorn) Resolves: rhbz#1246663- network: include --nodefroute option in generated kickstart (rvykydal) Resolves: rhbz#1274686- network: don\'t misconfigure /etc/sysconfig/network GATEWAY (rvykydal) Resolves: rhbz#1181290- ibft: add support for vlan id (rvykydal) Resolves: rhbz#831002 Related: rhbz#831002
* Tue Dec 01 2015 Samantha N. Bueno - 13.21.240-1- Write --cdl clearpart option to /root/anaconda-ks.cfg (jstodola) Resolves: rhbz#1211559- Fix dasdfmt progress bar. (sbueno+anaconda) Resolves: rhbz#1210450
* Tue Jun 30 2015 Brian C. Lane - 13.21.239-1- Align end sector in the appropriate direction for resize. (bcl) Resolves: rhbz#1236506- Filter out free regions too small for alignment of partitions (bcl) Resolves: rhbz#1236506
* Fri Jun 19 2015 Samantha N. Bueno - 13.21.238-1- Include drbg module in the initrd. (sbueno+anaconda) Resolves: rhbz#1233088
* Thu Jun 11 2015 Samantha N. Bueno - 13.21.237-1- Fix scanning of non-leaf lvs. (dlehman) Resolves: rhbz#1213748- Fix KeyError in devicetree. (sbueno+anaconda) Resolves: rhbz#1225469- Fix partition alignment problems. (sbueno+anaconda) Resolves: rhbz#1209424
* Tue May 19 2015 Samantha N. Bueno - 13.21.236-1- Include lvm thinp utilities. (dlehman) Resolves: rhbz#1212735- TypeError: argument must be string (jkonecny) Resolves: rhbz#1209414
* Thu May 07 2015 Samantha N. Bueno - 13.21.235-1- Don\'t remove pps_core from ppc64.img (sbueno+anaconda) Resolves: rhbz#1213417- Check for FBA DASDs so we don\'t try to format them with dasdfmt. (sbueno+anaconda) Resolves: rhbz#1144979- Include hyperv modules in mk-images (sbueno+anaconda) Resolves: rhbz#1132770
* Tue Apr 14 2015 Samantha N. Bueno - 13.21.234-1- Fix lvm detection broken with introduction of thinp support. (dlehman) Resolves: rhbz#1200832 Related: rhbz#1083459- RHEL 6.6 Upgrade Fails from AttributeError on Multipath (rmarshall) Resolves: rhbz#1129499- Drop hy.po Armenian translation (bcl) Resolves: rhbz#1205286 Related: rhbz#1205286- Update translation documentation for Zanata (bcl) Resolves: rhbz#1205286 Related: rhbz#1205286- Switch translation support to fedora.zanata.org (bcl) Resolves: rhbz#1205286
* Fri Mar 13 2015 Samantha N. Bueno - 13.21.233-1- Keep track of whether users should be prompted to format CDL dasds. (sbueno+anaconda) Resolves: rhbz#1164240 Related: rhbz#1164240
* Tue Mar 03 2015 Samantha N. Bueno - 13.21.232-1- Remove even more drivers for ppc64 32M limit (bcl) Resolves: rhbz#1198173- Fix detection of unformatted and LDL DASDs. (sbueno+anaconda) Resolves: rhbz#1144979- On interactive kickstart installs, still get the password from the ks file. (clumens) Resolves: rhbz#995531- Enable sharing of the VNC server. (sbueno+anaconda) Resolves: rhbz#1168024- RHEL6 Basic Video Driver Install to Windows2012 VM Fails (rmarshall) Resolves: rhbz#1083586- dracut needs iscsi_firmware cmdline arg (bcl) Resolves: rhbz#1185792- Exclude prelink package in FIPS mode (bcl) Resolves: rhbz#697938- Handle NoneType Exception after deleting PPC partitions (rmarshall) Resolves: rhbz#1021445- Bring support for nicdelay back using NM\'s GATEWAY_PING_TIMEOUT (rvykydal) Resolves: rhbz#979163
* Thu Feb 12 2015 Samantha N. Bueno - 13.21.231-1- Add support for lvm thin provisioning via ks custom storage. (dlehman) Resolves: rhbz#1083459- Make sure new freebl libs are part of initrd. (sbueno+anaconda) Resolves: rhbz#1183134- Prevent anaconda from crashing due to repeated calls to rpmReadConfigFiles. (sbueno) Resolves: rhbz#1021534
* Tue Feb 03 2015 Samantha N. Bueno - 13.21.230-1- Shrink the LV if the VG is out of space (bcl) Resolves: rhbz#1153376- Only set GPT boot flag on ESP partition (bcl) Resolves: rhbz#1139606- Add anaconda support for using clearpart --cdl option. (sbueno+anaconda) Resolves: rhbz#1164240- Properly check and show warnings for LDL DASDs (sbueno+anaconda) Resolves: rhbz#1144979- Add new freebl libraries (bcl) Resolves: rhbz#1182595- Write new options to zipl.conf (sbueno+anaconda) Resolves: rhbz#1171053- Detect and show a warning for LDL DASDs. (sbueno+anaconda) Resolves: rhbz#1144979- Make EFI.bootDevice() return best device for several calling contexts (amulhern) Resolves: rhbz#1145812
* Mon Sep 08 2014 Samantha N. Bueno - 13.21.229-1- Revert \"Use edd fcoe boot option instead of enumerating all ifaces\" (rvykydal) Resolves: rhbz#1103920
* Fri Sep 05 2014 Samantha N. Bueno - 13.21.228-1- Prevent duplicate snapshot accounting. (dlehman) Related: rhbz#1043916
* Fri Aug 29 2014 Samantha N. Bueno - 13.21.227-1- Fix typo in previous patch \"Correctly determine whether...\". (dlehman) Related: rhbz#842920
* Mon Aug 25 2014 Samantha N. Bueno - 13.21.226-1- Let tmp use more than 250M when there is more RAM (bcl) Resolves: rhbz#1123791- Move totalMemory into its own file (bcl) Related: rhbz#1123791 Resolves: rhbz#1123791
* Tue Aug 12 2014 Brian C. Lane - 13.21.225-1- Allow missing swap devices to be skipped during upgrade (dshea) Resolves: rhbz#1044716- Don\'t force installation of authconfig, chkconfig, or system-config-firewall. (clumens) Resolves: rhbz#1123481- Provide ways in kickstart to skip kernel and bootloader. (clumens) Related: rhbz#1123481- Implement %packages --instLangs. (clumens) Related: rhbz#1123481- Allow skipping installation of the core group, if asked for in kickstart. (clumens) Related: rhbz#1123481- Fix ks fetching on nfs via vlan (sbueno+anaconda) Resolves: rhbz#1067857- Fix traceback when rpm scriptlets fail during pkg install. (sbueno+anaconda) Resolves: rhbz#1122532
* Wed Jun 25 2014 Samantha N. Bueno - 13.21.224-1- Add shared-mime-info to the instroot (dshea) Resolves: rhbz#1110834
* Tue Jun 24 2014 Samantha N. Bueno - 13.21.223-1- Change pixbuf loaders path. (sbueno+anaconda) Resolves: rhbz#1110834- Remove unnecessary drivers to contain the size of ppc64.img. (sbueno+anaconda) Resolves: rhbz#1112405
* Mon Jun 23 2014 Samantha N. Bueno - 13.21.222-1- Rm device from lvm reject filter if in action list. (sbueno+anaconda) Resolves: rhbz#885755- The boot menu entry should contain the RHEL major release number (mkolman) Resolves: rhbz#1001960
* Wed Jun 18 2014 Samantha N. Bueno - 13.21.221-1- Add BuildRequires: gdk-pixbuf2-devel (sbueno+anaconda) Resolves: rhbz#1109298- If kernel-kdump is installed, don\'t set it as the default kernel. (sbueno+anaconda) Resolves: rhbz#734121- Close yum objects before running post scripts (bcl) Resolves: rhbz#1110148- Catch custom partitioning problems on UEFI (bcl) Resolves: rhbz#991620- Mark dracut-network for installation on mpath. (sbueno+anaconda) Resolves: rhbz#1007463- Write --percent to kickstart output even if --grow was used (mkolman) Resolves: rhbz#1046320
* Fri Jun 13 2014 Samantha N. Bueno - 13.21.220-1- Fix wrong attribute name in swap ks line (bcl) Resolves: rhbz#1002924 Related: rhbz#1002924- Look up MD arrays by MD UUID, not FS UUID. (dlehman) Related: rhbz#868182- Remove snapshots as needed when removing LVs. (dlehman) Resolves: rhbz#1043916- Let LVM determine alignment for PV data areas. (dlehman) Resolves: rhbz#962961- Correctly determine whether any partitioning has been done. (dlehman) Resolves: rhbz#842920- Fix handling of LUKS when using onpart. (dlehman) Resolves: rhbz#840890
* Thu Jun 05 2014 Samantha N. Bueno - 13.21.219-1- Fix typo from commit ed3caa7b (bcl) Related: rhbz#1039051 Resolves: rhbz#1039051- Write fsoptions to anaconda-ks.cfg (bcl) Resolves: rhbz#1002924- Add logging to bootloaderInfo (bcl) Resolves: rhbz#974996
* Wed Jun 04 2014 Samantha N. Bueno - 13.21.218-1- Fix rsyslogd calls to remove deprecated flag. (sbueno+anaconda) Resolves: rhbz#1104234- Maintain original device order in identifyMultipaths (artur.paszkiewicz) Resolves: rhbz#868182- network: add kickstart --domain (ifcfg DOMAIN) option (rvykydal) Resolves: rhbz#1039051
* Tue May 20 2014 Samantha N. Bueno - 13.21.217-1- Correct matching of md raid names containing special characters (artur.paszkiewicz) Resolves: rhbz#1096889- network: hide (debug) confusing log message for ipv6.conf (rvykydal) Resolves: rhbz#1031481- network: write bond options in generated kickstart (rvykydal) Resolves: rhbz#1009376- network: fix --bondopts used in kickstart %pre section (rvykydal) Resolves: rhbz#1038001- Add ping to initrd for NM\'s GATEWAY_PING_TIMEOUT / nicdelay (rvykydal) Related: rhbz#979163 Resolves: rhbz#979163- Remove more drivers on ppc64 to reduce initrd size (bcl) Resolves: rhbz#1098486
* Mon May 12 2014 Samantha N. Bueno - 13.21.216-1- Add buildarch option to buildinstall (bcl) Related: rhbz#1087466 Resolves: rhbz#1087466- Remove actions that try to remove non-existing devices (vpodzime) Resolves: rhbz#906807- Rename dev_actions to prune_actions (vpodzime) Related: rhbz#906807- Add dm-raid45 to initrd (mmatsuya) Resolves: rhbz#1056830- Fix echo typo (bcl) Resolves: rhbz#969339- Copy firmware updates to rootPath (bcl) Resolves: rhbz#1043372- Skip comments in dmidecode output (bcl) Resolves: rhbz#1064701- Replace hard-coded console device in generic.prm. (sbueno+anaconda) Resolves: rhbz#1081596- Don\'t remove the .efi files from buildinstall (vpodzime) Resolves: rhbz#1076369
* Tue Oct 22 2013 Samantha N. Bueno - 13.21.215-1- Explicitly load dm-raid.ko for lvm raid segment types. (dlehman) Resolves: rhbz#873281
* Mon Oct 21 2013 Samantha N. Bueno - 13.21.214-1- Don\'t traceback due to unpartitioned devices (mkolman) Resolves: rhbz#1007683
* Wed Oct 16 2013 Samantha N. Bueno - 13.21.213-1- Remove manual call to recreate initrd if installing on iSCSI. (sbueno+anaconda) Resolves: rhbz#1007884- Some devices may not be present during kickstart parse, so when there is no match revert to previous behavior and just use the name as-is. (bcl) Resolves: rhbz#1014658
* Tue Oct 15 2013 Samantha N. Bueno - 13.21.212-1- Fix getDiskPart for nvme devices (vpavlin) Resolves: rhbz#1018703- fcoe: rise fipvlan timeout to 100 (rvykydal) Resolves: rhbz#1009691- Revert \"Check if disklabel is set (mkolman)\" Resolves: rhbz#1007683- Check if disklabel is set (mkolman) Resolves: rhbz#1007683
* Wed Oct 09 2013 Samantha N. Bueno - 13.21.211-1- Do not limit swap size to 10 % of disk space for hibernation (vpodzime) Resolves: rhbz#1003844- Fix the display of multipath devices (dshea) Related: rhbz#914637 Resolves: rhbz#1007641- Fix traceback in s390x bootloader code. (sbueno+anaconda) Resolves: rhbz#1017068- Support bonding in %pre section (rvykydal) Resolves: rhbz#971961
* Mon Oct 07 2013 Samantha N. Bueno - 13.21.210-1- Fix bootloader issues on s390x. (sbueno+anaconda) Resolves: rhbz#1008941 Resolves: rhbz#875644 Resolves: rhbz#894050
* Fri Oct 04 2013 Samantha N. Bueno - 13.21.209-1- Forced removal of some kernel modules in the ppc64 ramdisk (dcantrell) Resolves: rhbz#1014719- Add some more safety checks for the initrd.img size check on ppc64. (dcantrell) Related: rhbz#1014719
* Thu Oct 03 2013 David Cantrell - 13.21.208-1- Catch BUILDARCH set to \'ppc\' or \'ppc64\' when trimming down the image. (dcantrell) Related: rhbz#1014719- Move and fix the ppc64 image size check (dshea) Resolves: rhbz#1014719- Whitespace changes for mk-images.ppc (dshea) Related: rhbz#1014719
* Thu Sep 26 2013 Samantha N. Bueno - 13.21.207-1- Remove firmware from the boot image that does not apply to ppc64 (dcantrell) Resolves: rhbz#1006043- fcoe: adapt bnx2fc detection to changed sysfs path structure (rvykydal) Resolves: rhbz#1008731- Do not select FS packages over and over (vpodzime) Resolves: rhbz#994504- Check size of images/netboot/ppc64.img to see if it\'s larger than 32M. (dcantrell) Related: rhbz#1006043
* Fri Sep 13 2013 Samantha N. Bueno - 13.21.206-1- Fix traceback occurring in ppc bootloader code. (sbueno+anaconda) Related: rhbz#877852 Resolves: rhbz#1007724
* Wed Sep 11 2013 Samantha N. Bueno - 13.21.205-1- PPC: strengthen PReP-picking algorithm (wwoods) Resolves: rhbz#877852- Drop support for ssh protocol version 1 (bcl) Resolves: rhbz#1004752
* Tue Aug 20 2013 Samantha N. Bueno - 13.21.204-1- Don\'t require fcoe-utils if we\'re on s390. (sbueno+anaconda) Resolves: rhbz#998486
* Wed Aug 14 2013 Samantha N. Bueno - 13.21.203-1- Update spec file to require new pykickstart. (sbueno+anaconda) Related: rhbz#886010- Revert \"Don\'t filter partitions on mpath devices in lvm (sbueno+anaconda)\" Resolves: rhbz#996595 Related: rhbz#885755- Fix bootloader upgrades if using zIPL. (sbueno+anaconda) Resolves: rhbz#894050- Fix issue where extra mpath entries wrongly shown in UI. (sbueno+anaconda) Resolves: rhbz#914637- Show warning msg if re-using a partition without formatting. (sbueno+anaconda) Resolves: rhbz#886020
* Mon Aug 12 2013 Samantha N. Bueno - 13.21.202-1- Add support for preexisting lvm using raid segment types. (dlehman) Resolves: rhbz#873281- Add a bit of padding for metadata in new md size estimates. (dlehman) Resolves: rhbz#895982- Expand warning text for package install issues. (sbueno+anaconda) Resolves: rhbz#895098- Don\'t filter partitions on mpath devices in lvm (sbueno+anaconda) Resolves: rhbz#885755- Move \"nousbstorage\" and \"nousb\" handling into init.c. (clumens) Resolves: rhbz#947704
* Wed Aug 07 2013 Samantha N. Bueno - 13.21.201-1- Ensure x86 /boot is on a partition < 2TB (dshea) Resolves: rhbz#915666- Fix bootloader device detection on ks upgrades for s390x (sbueno+anaconda) Resolves: rhbz#875644
* Tue Aug 06 2013 Samantha N. Bueno - 13.21.200-1- discinfo isn\'t needed for rescue (bcl) Resolves: rhbz#859569
* Fri Aug 02 2013 Samantha N. Bueno - 13.21.199-1- Fix issue where installation hangs in linuxrc.s390. (sbueno+anaconda) Resolves: rhbz#949409- Pass mountopts to swap options (bcl) Resolves: rhbz#857517- Enable the AMD IOMMU driver if tboot is installed. (dshea) Resolves: rhbz#928144- Fix crash in handling of PReP Boot partitions (dshea) Resolves: rhbz#881005
* Wed Jul 24 2013 Samantha N. Bueno - 13.21.198-1- Use the active window as parent for new dialogs (dshea) Resolves: rhbz#888292- Add kickstart network --ipv6gateway option (rvykydal) Resolves: rhbz#905227- Limit the maximum swap size to 10 % of disk space (vpodzime) Resolves: rhbz#878907 Related: rhbz#879232- Don\'t kill FCoE vlan connections when configuring network in UI (rvykydal) Resolves: rhbz#882452- Use correct error message when running out of partition slots (mkolman) Resolves: rhbz#859420
* Wed Jul 17 2013 Samantha N. Bueno - 13.21.197-1- Check if selected repos have the core package group (mkolman) Resolves: rhbz#901515- Use install tree from repo=hd (bcl) Resolves: rhbz#818233- Allow /dev/disk/by-
* in bootloader --driveorder (bcl) Resolves: rhbz#890095
* Wed Jul 10 2013 Samantha N. Bueno - 13.21.196-1- Only pass exclusiveDisks for autopart (bcl) Resolves: rhbz#852523- Use standard losetup utility to get a free loop device (vpodzime) Resolves: rhbz#846336- Write directly to /etc/sysconfig/network so that inotify works (rvykydal) Resolves: rhbz#845572- Fix spelling errors in the About LVM dialog (vpodzime) Resolves: rhbz#851284- Set proper SELinux context of /etc/multipath. (sbueno+anaconda) Resolves: rhbz#919409- Fix max supported size for XFS partitions. (sbueno+anaconda) Resolves: rhbz#880577- Filter out /dev/sr
* from list-harddrives (bcl) Resolves: rhbz#847600- Show ks LVM DeviceErrors in the UI (bcl) Resolves: rhbz#880625- Send host-name to dhcp server in installer for dhcp + hostname (rvykydal) Resolves: rhbz#917815- Use edd fcoe boot option instead of enumerating all ifaces (rvykydal) Resolves: rhbz#909463- Don\'t write vlan kickstart configuration to parent device ifcfg file (mmatsuya) Resolves: rhbz#903689- Fix --vlanid option in generated kickstart file (rvykydal) Resolves: rhbz#921609
* Tue Jan 22 2013 Brian C. Lane - 13.21.195-1- Disconnect active slaves before activating bond (rvykydal) Related: rhbz#662007 Resolves: rhbz#662007- Some modules for Microsoft PV have different names (vpodzime) Related: rhbz#834689
* Tue Jan 15 2013 Brian C. Lane - 13.21.194-1- Fix nompath handling in advanced storage filter path. (dlehman) Resolves: rhbz#821042
* Tue Jan 08 2013 Brian C. Lane - 13.21.193-1- catch runtime errors and display message to user (sbueno+anaconda) Resolves: rhbz#730023- raise OSError with an error code and error string (sbueno+anaconda) Resolves: rhbz#730023
* Tue Dec 18 2012 Brian C. Lane - 13.21.192-1- Fix handling of nompath option. (dlehman) Related: rhbz#821042
* Fri Dec 14 2012 Brian C. Lane - 13.21.191-1- include .ssh.hmac in image (bcl) Resolves: rhbz#886479- Pass lv name sans vg name to safeLvmName. (dlehman) Resolves: rhbz#886150- Validate and correct vg names as needed. (dlehman) Related: rhbz#747278
* Tue Dec 11 2012 Brian C. Lane - 13.21.190-1- Don\'t perform unnecessary str formatting on boot dev name (sbueno+anaconda) Resolves: rhbz#875652- Generate kickstart fcoe commands for devices added in UI (rvykydal) Related: rhbz#813998 Resolves: rhbz#813998
* Mon Dec 10 2012 Brian C. Lane - 13.21.189-1- Revert \"Generate kickstart fcoe commands for devices added in UI\"
* Mon Dec 10 2012 Brian C. Lane - 13.21.188-1- Revert \"Reserve 50% of VG for interactive installs (bcl)\" Resolves: rhbz#875918 Resolves: rhbz#884761- Fix fipvlan -f argument once more and for good (rvykydal) Related: rhbz#836321- Generate kickstart fcoe commands for devices added in UI (rvykydal) Related: rhbz#813998 Resolves: rhbz#813998
* Thu Nov 29 2012 Brian C. Lane - 13.21.187-1- cleanup addon repo cache dirs before upgrade (bcl) Resolves: rhbz#746925
* Mon Nov 26 2012 Brian C. Lane - 13.21.186-1- always show reserved space in lvm dialog (bcl) Resolves: rhbz#879667
* Mon Nov 19 2012 Brian C. Lane - 13.21.185-1- update mdraid superBlock space calculation (bcl) Resolves: rhbz#876450
* Fri Nov 16 2012 Brian C. Lane - 13.21.184-1- Reserve 50% of VG for interactive installs (bcl) Resolves: rhbz#875918
* Fri Oct 26 2012 Brian C. Lane - 13.21.183-1- Add Microsoft PV drivers (vpodzime) Resolves: rhbz#834689
* Mon Oct 22 2012 Brian C. Lane - 13.21.182-1- Do not use boot= in grub with fips=1 and /boot on / (vpodzime) Resolves: rhbz#851249- Add missing pieces for kickstart encryption cipher option. (dlehman) Related: rhbz#838736
* Mon Oct 15 2012 Brian C. Lane - 13.21.181-1- mpath: fix bug in parseMultipathOutput (wwoods) Resolves: rhbz#803883- Configure new-kernel-pkg to keep tboot configuration on updates (pjones) Resolves: rhbz#742885- Honor the nompath parameter. (dlehman) Resolves: rhbz#821042- Validate lv names. (dlehman) Resolves: rhbz#747278- Add support for specifying encryption cipher mode via kickstart. (dlehman) Related: rhbz#838736- Implementing a delay algorithm for slow bios storage devices (B_B_Singh) Resolves: rhbz#848741- Add support for fcoe --autovlan kickstart option (rvykydal) Resolves: rhbz#813998- Add fcoe kickstart support (rvykydal) Resolves: rhbz#813998- add unsupported_hardware kickstart command (bcl) Resolves: rhbz#824963
* Wed Oct 03 2012 Brian C. Lane - 13.21.180-1- use udev_resolve_devspec to resolve raid onpart members (bcl) Resolves: rhbz#809641- fix duplicate raid error message on unsupported arch (kamalesh) Resolves: rhbz#811197- handle zero size package metadata (bcl) Resolves: rhbz#823690- Fix handling of non-valid nameserver ips (rvykydal) Resolves: rhbz#795535 Related: rhbz#795535- Support multiple nameservers in loader TUI (rvykydal) Resolves: rhbz#795535
* Thu Sep 20 2012 Brian C. Lane - 13.21.179-1- Take into account all configured ifaces when setting GATEWAY (rvykydal) Resolves: rhbz#846393- Use proper labeling of automatic ipv6 configuration in loader (rvykydal) Resolves: rhbz#656315- Don\'t limit linksleep option to ksdevice=\"link\" ifaces (dustymabe) Resolves: rhbz#784001- Rescan all disks when moving back through UI (bcl) Resolves: rhbz#804557- vlan support: enable vlan in NM in target system (rvykydal) Resolves: rhbz#668065- Do not do kssendmac by default. That\'s what the parameter is for (mpoole). (clumens) Resolves: rhbz#814253- bonding support: enable bonding in NM in target system (rvykydal) Resolves: rhbz#662007- bonding support: only in loader (i.e. for activated devices) (rvykydal) Resolves: rhbz#662007- bonding support: kickstart (rvykydal) Resolves: rhbz#662007- bonding support: boot option (rvykydal) Resolves: rhbz#662007- vlan support: only in loader (i.e. for activated devices) (rvykydal) Resolves: rhbz#668065- vlan support: enable vlan in NM in installer (sysconfig/network) (rvykydal) Resolves: rhbz#668065- vlan support: vlan device is found only when activated (rvykydal) Resolves: rhbz#668065- vlan support: loader (rvykydal) Resolves: rhbz#668065- Add missing \'-fcoe\' suffix to fipvlan -f option (rvykydal) Resolves: rhbz#836321- Enable modprobe blacklists (msivak) Resolves: rhbz#840723- Restore execute bits for DUD binaries (msivak) Resolves: rhbz#819564- Require new version of pykickstart (vpodzime) Related: rhbz#848818- Add support for swap --hibernation on LVM (vpodzime) Resolves: rhbz#848818- Try to use both udev_resolve_devspec(pv) and pv as device name (vpodzime) Resolves: rhbz#809640
* Thu Aug 16 2012 Brian C. Lane - 13.21.178-1- verify package checksums against metadata (bcl) Resolves: rhbz#681224- Include sha256sum in the installroot (jkeating) Resolves: rhbz#838742- change missing boot partition error (bcl) Resolves: rhbz#821336- fix typo in GPT warning (bcl) Resolves: rhbz#801337
* Tue Aug 14 2012 Brian C. Lane - 13.21.177-1- Enable all addon repos when doing upgrade (vpodzime) Resolves: rhbz#746925- Add VMware PV drivers (vpodzime) Resolves: rhbz#837835- Use udev_resolve_devspec to recognize the partition used in --onpart (vpodzime) Resolves: rhbz#809640- Clear internal dasd list when resetting storage (jkeating) Resolves: rhbz#823534- Reset selinux context on /etc/zipl.conf (jkeating) Resolves: rhbz#818875- Remove unnecessary BOOTPROTO line from ifcfg files (jkeating) Resolves: rhbz#819486- Make zipl call sensitive to non-zero exit (jkeating) Resolves: rhbz#730023- Provide option to make non-zero exits fatal (jkeating) Related: rhbz#730023- Keep format _mountType in sync with _type (jkeating) Resolves: rhbz#828650- Check passphrase unless explicit cancel (jkeating) Resolves: rhbz#821724- Accept iSCSI details on F12 press (jkeating) Resolves: rhbz#823447- Add readonly disks to the ignored list (jkeating) Resolves: rhbz#772977- Trigger udev to get device details visible (jkeating) Resolves: rhbz#729910- Add ability to match sysname when triggering udev (jkeating) Related: rhbz#729910
* Tue Jun 12 2012 David Cantrell - 13.21.176-1- Find initiator name for partial offload iscsi bnx2i devices (rvykydal) Resolves: rhbz#830756
* Fri Jun 01 2012 David Cantrell - 13.21.175-1- Adapt to fipvlan naming change (rvykydal) Resolves: rhbz#823086- Handle offload qla4xxx iscsi devices properly (rvykydal) Resolves: rhbz#823810
* Tue May 29 2012 David Cantrell - 13.21.174-1- Pick up latest translation work (dcantrell) Resolves: rhbz#816414
* Tue May 15 2012 David Cantrell - 13.21.173-1- Set network configuration for root on partial offload iscsi devices (rvykydal) Resolves: rhbz#819132- Fix traceback trying to import textw.netconfig_text (dcantrell) Resolves: rhbz#785400
* Fri May 11 2012 David Cantrell - 13.21.172-1- Change swap suggestions to the chart proposed in the discussion (vpodzime) Resolves: rhbz#744129
* Mon May 07 2012 David Cantrell - 13.21.171-1- Load mlx4 modules after DDs to make updates possible (msivak) Resolves: rhbz#801094- Make sure all kickstart partition reqs get appropriate weight setting. (dlehman) Resolves: rhbz#813158- Show lvm vg free space as a whole number in the partition gui. (dlehman) Related: rhbz#734128- Add sg_inq and sg_readcap to the install image (mgracik) Resolves: rhbz#737097
* Wed Apr 25 2012 David Cantrell - 13.21.170-1- Add ip= dracut parameter for iscsi nodes using default iface (rvykydal) Resolves: rhbz#500273 Related: rhbz#500273- Do not pass :default:default iscsi nic specification to dracut (rvykydal) Resolves: rhbz#500273 Related: rhbz#500273- Fix a question in a storage init, when no dispatcher is present (msivak) Resolves: rhbz#805910
* Mon Apr 16 2012 David Cantrell - 13.21.169-1- fall back to global proxy for repos (bcl) Resolves: rhbz#788537- set PROXY environmental variables (bcl) Resolves: rhbz#800388- Add /usr/bin/id to install image (mgracik) Resolves: rhbz#773545- Disable NM for iface used by root on iscsi (rvykydal) Resolves: rhbz#500273 Related: rhbz#500273
* Fri Apr 13 2012 David Cantrell - 13.21.168-1- Don\'t write iscsi targets set up via ibft in generated ks (rvykydal) Resolves: rhbz#811426 Related: rhbz#811426- Fix parsing of iscsi iface udev info for offload devices (rvykydal) Resolves: rhbz#811426- Honour dhcptimeout set for NM in anaconda (rvykydal) Resolves: rhbz#769145 Related: rhbz#769145
* Thu Apr 05 2012 David Cantrell - 13.21.167-1- Use the translated repo name in the Edit Repository dialog (vpodzime) Resolves: rhbz#728556
* Thu Apr 05 2012 David Cantrell - 13.21.166-1- Unpack also auto_vlan item of fcoe.nic. (rvykydal) Related: rhbz#735857- Add getopt to all architectures (mgracik) Resolves: rhbz#773545
* Wed Apr 04 2012 David Cantrell - 13.21.165-1- Set productIsFinal default value to False (mgracik) Resolves: rhbz#808935- Correct and simplify handling of \"bootable\" partition requests (dlehman) Resolves: rhbz#804915- Add semicolon to dhclient timeout option (rvykydal) Resolves: rhbz#769145 Related: rhbz#769145
* Thu Mar 29 2012 David Cantrell - 13.21.164-1- Fix onbiosdisk comparison for kickstart installs (dcantrell) Resolves: rhbz#802397- Catch exception when returning tty control to init on s390(x) (vpodzime) Resolves: rhbz#747219
* Mon Mar 26 2012 David Cantrell - 13.21.163-1- Fix sense of test to identify /boot versus PReP. (dlehman) Related: rhbz#725418- We have to return tty\'s control to init\'s process group at exit (vpodzime) Resolves: rhbz#747219- ISIG is not an iflag but lflag (vpodzime) Related: rhbz#747219
* Tue Mar 20 2012 David Cantrell - 13.21.162-1- Fix for checking the number of CPUs on s390x (jstodola) Resolves: rhbz#736457
* Mon Mar 12 2012 Martin Sivak - 13.21.161-1- Use netdevices.items() to unpack values (mgracik) Resolves: rhbz#802222
* Fri Mar 09 2012 David Cantrell - 13.21.160-1- There is no product named \'Red Hat Enterprise Linux Public Beta\' (dcantrell) Resolves: rhbz#801335
* Wed Mar 07 2012 David Cantrell - 13.21.159-1- Add auto_vlan option for fcoe devices in UI (rvykydal) Resolves: rhbz#735857- Fix value for infiniband type used in ifcfg files (rvykydal) Related: rhbz#660686 Resolves: rhbz#660686- Install and enable rdma service when using IPoIB network device (rvykydal) Related: rhbz#660686 Resolves: rhbz#660686
* Wed Mar 07 2012 David Cantrell - 13.21.158-1- Use read-only locking for lvm commands in udev rules. (dlehman) Related: rhbz#783841- On PPC use only the boot disk in yaboot.conf (mgracik) Resolves: rhbz#753108
* Mon Mar 05 2012 David Cantrell - 13.21.157-1- Allow installation of optional packages from the base group via ks. (clumens) Resolves: rhbz#727186- iscsi: add iface binding support to discovery and setup TUI (rvykydal) Resolves: rhbz#500273- iscsi: add interface binding support to kickstart (rvykydal) Resolves: rhbz#500273- iscsi: add Configure Network to advanced storage GUI (rvykydal) Resolves: rhbz#500273 Related: rhbz#500273- iscsi: Display iface in login success dialog (rvykydal) Resolves: rhbz#500273- iscsi: display iface in Discovered Nodes dialog (rvykydal) Resolves: rhbz#500273- iscsi: add iface binding support to iscsi device class (nic) (rvykydal) Resolves: rhbz#500273- iscsi: add iface binding support to discovery and setup GUI (rvykydal) Resolves: rhbz#500273
* Fri Mar 02 2012 David Cantrell - 13.21.156-1- Find the CMSDASD device on guests with one CPU active (dcantrell) Resolves: rhbz#736457- Make sure /boot is on the same disk as prepboot (mgracik) Resolves: rhbz#727136- Implement dhcptimeout boot option (rvykydal) Resolves: rhbz#769145- Fix EFI boot from multipath device (msivak) Resolves: rhbz#691794- ipoib support - write TYPE to ifcfg also for disabled devices (rvykydal) Related: rhbz#660686 Resolves: rhbz#660686- Fix sense of disklabel size check and add some logging (bcl) Resolves: rhbz#671230
* Tue Feb 28 2012 David Cantrell - 13.21.155-1- Update the fs size limit for ext3/ext4 from 8TB to 16TB. (dlehman) Resolves: rhbz#767727- Clean up obsolete extended partitions if partitioning fails. (dlehman) Resolves: rhbz#725395- Yaboot cannot find /boot if it is on a logical partition. (dlehman) Resolves: rhbz#725418- Add support for reserving space in lvm vgs via kickstart. (dlehman) Resolves: rhbz#663647- Enforce lvm limit of 50 character name length for lvs, vgs. (dlehman) Resolves: rhbz#747278
* Mon Feb 27 2012 David Cantrell - 13.21.154-1- Revert \"Support XFS on all filesystems except /boot\" Related: rhbz#766878
* Mon Feb 27 2012 David Cantrell - 13.21.153-1- Support XFS on all filesystems except /boot (dcantrell) Resolves: rhbz#766878- Add --same-as-ram kickstart option for swap size specification (vpodzime) Resolves: rhbz#744129- Limit the size of swap partitions (vpodzime) Resolves: rhbz#744129- Correctly handle reqs with max size no larger than base size. (vpodzime) Related: rhbz#744129- Add swapSameAsRam and use it for autopartitioning (vpodzime) Resolves: rhbz#744129- Change swap size suggestion to values from documentation (vpodzime) Resolves: rhbz#744129- Pass ifname to dracut for disconnected fcoe ifaces (rvykydal) Resolves: rhbz#743784- iscsi: fix listing of active nodes of a target (rvykydal) Resolves: rhbz#752066 Related: rhbz#752066- Fix debug message (an oversight from the patch with fix) (rvykydal) Resolves: rhbz#752066 Related: rhbz#752066- Generate repo= ks command only for repos added by user (rvykydal) Resolves: rhbz#738577
* Thu Feb 16 2012 David Cantrell - 13.21.152-1- Try nslookup for DNS test in linuxrc.s390 (dcantrell). Resolves: rhbz#756608- Change the ordering of unmount, unlink and rename in shutdown sequence (vpodzime) Resolves: rhbz#750417- Generate connection UUID in inital ifcfg files created by anaconda (rvykydal) Resolves: rhbz#705328- Take in change of a binary name (brcm_iscsiuio -> iscsiuio) (rvykydal) Resolves: rhbz#731761- Add xhci-hcd module to the initrd (mgracik) Resolves: rhbz#783245- Fix the autogenerated kickstart (mgracik) Resolves: rhbz#738580- Retry automatically when package download fails (mgracik) Resolves: rhbz#732108- Clear partitions\' metadata when \'clearpart --initlabel\' used. (dlehman) Resolves: rhbz#783841- Fix support for detecting existing mirrored lvs. (dlehman) Resolves: rhbz#734128- Use proper binary (/usr/bin/udisks) to start livecd anaconda (msivak) Resolves: rhbz#746495- Set ONBOOT=yes for FCoE devices (rvykydal) Resolves: rhbz#755147- Added virt-what to install environment (mgracik) Resolves: rhbz#773545- Added lsscsi (mgracik) Resolves: rhbz#737097- Added sg3_utils (mgracik) Resolves: rhbz#737097
* Wed Feb 08 2012 David Cantrell - 13.21.151-1- Disable ipv6 on target system when using noipv6 option (rvykydal) Resolves: rhbz#735791- set bootloader default when no bootloader detected (bcl) Resolves: rhbz#754375- Focus the Add/Edit boot loader dialog after error (mgracik) Resolves: rhbz#745797- iscsi: no discovery on each target login (ks + consolidate) (rvykydal) Resolves: rhbz#752066- iscsi: no discovery on each target login (UI) (rvykydal) Resolves: rhbz#752066
* Tue Jan 31 2012 David Cantrell - 13.21.150-1- Set default BOOTPROTO=dhcp for network service (minimal installs) (rvykydal) Resolves: rhbz#723404- Select the same device for ksdevice=link in loader and stage2 (jbastian) Resolves: rhbz#760250- Add mnemonics to Configure Network button (rvykydal) Resolves: rhbz#766902- Search /lib/firmware/updates and /tmp/DD/lib/firmware/updates (msivak) Resolves: rhbz#784327- Single quote values in show_parms() in linuxrc.s390 (dcantrell) Resolves: rhbz#772970- Fix scan of already-active mdbiosraidarrays before scan of container. (dlehman) Resolves: rhbz#740870- i18n: Do not include newlines in the reinit dialog\'s label. (akozumpl) Resolves: rhbz#728556- Silence xrandr. (akozumpl) Resolves: rhbz#732966- Fix problems found by Coverity scan (dcantrell) Resolves: rhbz#727881- Write isfinal to the buildstamp for sparc too (mgracik) Resolves: rhbz#740164- Remove BETANAG, use productIsFinal instead (mgracik) Resolves: rhbz#740164- Add productIsFinal variable (mgracik) Resolves: rhbz#740164- Make the rhgb and quiet kernel arguments appear last (mgracik) Resolves: rhbz#742169- Workaround a bash bug to install some packages also on ix86. (msivak) Resolves: rhbz#750126- Allow the user to change his mind about drive reinitializing (msivak) Resolves: rhbz#730959- Fix the parser for devel argument so it works when it is the last one. (msivak) Resolves: rhbz#754031- Add netcat and it\'s requirement libbsd to anaconda (msivak) Resolves: rhbz#770486- Pass the noprobe arguments to loadDriverFromMedia (msivak) Resolves: rhbz#690058- Name the boot loader add/edit dialog better (mgracik) Resolves: rhbz#745942- Show warning if the bootloader password is empty (mgracik) Resolves: rhbz#745805- Focus the bootloader dialog after error message (mgracik) Resolves: rhbz#745797- Add curl to the install image (mgracik) Resolves: rhbz#625697- check if stdout and stderr are the same in execWithRedirect and open the file only once in such cases Resolves: rhbz#750710- pass through the network step in text mode in both directions Resolves: rhbz#737452
* Fri Nov 04 2011 Chris Lumens - 13.21.149-1- use 800x600 as minimal mainWindow size (vpodzime) (mgracik) Resolves: rhbz#750764
* Wed Nov 02 2011 Chris Lumens - 13.21.148-1- Support prefix length in ipv6= cmdline option (rvykydal) Resolves: rhbz#679108 Related: rhbz#679108
* Tue Oct 25 2011 David Cantrell - 13.21.147-1- Make sure to clean up temp vg paths after lvm edit. (dlehman) Resolves: rhbz#747606- Add xenfs module to initrd.img (dcantrell). Resolves: rhbz#747388
* Mon Oct 17 2011 David Cantrell - 13.21.146-1- mpath: flush more eagerly in filter_gui. (akozumpl) Resolves: rhbz#744772
* Thu Oct 13 2011 David Cantrell - 13.21.145-1- Block button handlers after a button is pressed (mgracik) Resolves: rhbz#738217
* Mon Oct 10 2011 David Cantrell - 13.21.144-1- Do not require transifex-client for builds. (dcantrell) Related: rhbz#744094
* Mon Oct 10 2011 David Cantrell - 13.21.143-1- Remove references to \'ku\', \'lo\', and \'my\' languages. (dcantrell) Related: rhbz#744094- Ignore po/
*.po (dcantrell) Related: rhbz#744094- Remove po/
*.po files as we are using transifex now. (dcantrell) Related: rhbz#744094- Use transifex to pull translations for rhel6-branch (dcantrell) Related: rhbz#744094- Update ja translations (dcantrell) Resolves: rhbz#744094- fcoe: modprobe the VLAN layer module. (akozumpl) Related: rhbz#641420- Wait after udev settles in DD code as usb has hardcoded timeout in kernel module (msivak) Related: rhbz#732496- Fix intendation error (dcantrell) Resolves: rhbz#740870- Only check relevant devices for dirty filesystems. (dlehman) Resolves: rhbz#741206
* Mon Oct 03 2011 David Cantrell - 13.21.142-1- Fix logging= parameter for tboot.gz grub.conf configuration (dcantrell) Resolves: rhbz#742152
* Tue Sep 27 2011 David Cantrell - 13.21.141-1- grub: write \'ip=eth0:dhcp,auto6\' instead of \'ip=eth0:dhcp ip=eth0:auto6\' (akozumpl) Resolves: rhbz#740222
* Tue Sep 20 2011 David Cantrell - 13.21.140-1- Exclude Xen guests when configuring tboot (dcantrell) Resolves: rhbz#737094- Fix format.majorminor caching. (akozumpl) Related: rhbz#731973- Fix detection of RAW driverdisc partitions while in manual selection mode (msivak) Related: rhbz#732496- fcoe: handle Broadcom fcoe devices correctly. (akozumpl) Resolves: rhbz#641420- fcoe: the control path in sysfs is now /sys/module/libfcoe (akozumpl) Related: rhbz#641420- fcoe: load bnx2fc if relevant. (akozumpl) Related: rhbz#641420- Fix the list-harddrives test script (mgracik) Resolves: rhbz#706099- Fix loadkeys-test (mgracik) Resolves: rhbz#706099- Fix PartitionDevice.path to work with device-mapper disks. (dlehman) Related: rhbz#731973- Allow DeviceFormat.cacheMajorminor to fail without an exception. (akozumpl) Resolves: rhbz#731973- Set formats\' device attr when associating the format with a device. (dlehman) Related: rhbz#731973- Cache the value of Format.majorminor(). (akozumpl) Related: rhbz#731973- More partition dialogs focusing after error (mgracik) Resolves: rhbz#679810
* Wed Sep 07 2011 David Cantrell - 13.21.139-1- mpath: create /etc/multipath/bindings if we are using friendly names. (akozumpl) Resolves: rhbz#734374
* Thu Sep 01 2011 David Cantrell - 13.21.138-1- On ppc64, call initrd image \"initrd.img\" (dcantrell) Related: rhbz#703914- Do not exit when loadkeys hits SystemError (mgracik) Resolves: rhbz#733595- Use loop7 instead of loop0 for the losetup test (mgracik) Resolves: rhbz#706099
* Fri Aug 26 2011 David Cantrell - 13.21.137-1- Fix import error in list-harddrives-test (mgracik) Resolves: rhbz#706099- Rescan for netdevs after clearing blacklist in linuxrc.s390 (dcantrell) Resolves: rhbz#733299
* Wed Aug 24 2011 David Cantrell - 13.21.136-1- Fix parsing of network kickstart command (mmatsuya) Resolves: rhbz#731274
* Tue Aug 23 2011 David Cantrell - 13.21.135-1- Convert a None from libiscsi.discover() to an empty list. (akozumpl) Resolves: rhbz#732380
* Mon Aug 22 2011 David Cantrell - 13.21.134-1- Fix the partitioning section of interactive kickstart installs (clumens). Resolves: rhbz#641861
* Mon Aug 22 2011 David Cantrell - 13.21.133-1- Fix typo in d5cabdd21c9f3c20e1e39863c15bff153e9e608f. (akozumpl) Resolves: rhbz#732358
* Fri Aug 19 2011 David Cantrell - 13.21.132-1- Fix indentation errors in iw/lvm_dialog_gui.py (dcantrell) Related: rhbz#679810- Use GPT on non-UEFI for disks larger than 2TB (dcantrell) Resolves: rhbz#671230- Make sure we don\'t remove the lvm symlinks (mgracik) Resolves: rhbz#676404- Do not show the lang and kbd screens again in stage2 (mgracik) Resolves: rhbz#706675- Focus many partition dialogs after error (mgracik) Resolves: rhbz#679810- Create the image file in losetup stub test (mgracik) Resolves: rhbz#706099- Print a newline after error message (mgracik) Resolves: rhbz#706099- Use Popen instead of check_output (mgracik) Resolves: rhbz#706099
* Thu Aug 18 2011 David Cantrell - 13.21.131-1- rescue mode: fix traceback calling progressWindow() (akozumpl) Resolves: rhbz#730714
* Wed Aug 17 2011 David Cantrell - 13.21.130-1- Move the trusted_boot setting into AnacondaYum.run (clumens). Resolves: rhbz#731260- Do not invalidate _cachedDevices (dcantrell) Resolves: rhbz#618535
* Tue Aug 16 2011 David Cantrell - 13.21.129-1- Add multiboot support for tboot (gang.wei) Resolves: rhbz#697419- Deal with zFCP multipath devices in the filter UI (dcantrell) Resolves: rhbz#618535
* Mon Aug 15 2011 David Cantrell - 13.21.128-1- Add /sbin/cio_ignore to s390x initrd.img (dcantrell) Resolves: rhbz#730650- Copy /etc/multipath/wwids to the sysimage. (akozumpl) Resolves: rhbz#701371- raid ui: compute max number of spares based on raid members selected. (akozumpl) Resolves: rhbz#729716- Include the command-stubs test scripts in the archive (mgracik) Resolves: rhbz#706099- Do not skip Lang and Kbd steps (mgracik) Resolves: rhbz#706675- Focus the Add/Edit repo dialog after error (mgracik) Resolves: rhbz#679810- Attempt to bring the network up before saving a bug report (clumens). Resolves: rhbz#668570- Show the progress in cmdline mode (mgracik) Resolves: rhbz#663644- Reuse existing /boot/efi and ignore vfat on non-boot devices (bcl) Resolves: rhbz#723976 Resolves: rhbz#729062
* Thu Aug 11 2011 David Cantrell - 13.21.127-1- Carry rdloaddriver= parameters through to the boot loader config. (dcantrell) Related: rhbz#689029- Implement rdloaddriver= in loader (dcantrell) Resolves: rhbz#689029- Support rdblacklist= boot parameter in addition to blacklist= (dcantrell) Related: rhbz#689029- Allow DriverDisc to contain vendor provided tools (msivak) Resolves: rhbz#659790- Raise informative error for ks=bootif, missing BOOTIF case (rvykydal). Resolves: rhbz#681803 Related: rhbz#681803- edd: fix traceback on Xen. (akozumpl) Resolves: rhbz#728280- Don\'t raise Retry dialog in loader kickstart networking (rvykydal) Resolves: rhbz#722276- Don\'t write duplicate lines for encrypted block devices. (dlehman) Resolves: rhbz#605938- Add a writeKS method for encrypted partitions. (cherry picked from commit 509dd717e1fcd8dd0115ed9029878be9a0330222) (clumens) Related: rhbz#605938
* Wed Aug 03 2011 David Cantrell - 13.21.126-1- Honor linksleep boot option (rvykydal) Resolves: rhbz#713991- Make the yum debuglevel more reasonable. (akozumpl) Resolves: rhbz#726804- Prevent SIGSEGV when going back after driver source selection (yoshihide.sonoda.ua) Resolves: rhbz#718901
* Fri Jul 29 2011 David Cantrell - 13.21.125-1- Only warn when swaps with no UUID are preexisting. (dlehman) Related: rhbz#695740- Skip cleardisks screen for custom partition layouts. (dlehman) Related: rhbz#709961- Add a warning about the fstab implications of swap devices with no UUID. (dlehman) Resolves: rhbz#695740- Fail gracefully when device name collisions occur in kickstart. (dlehman) Resolves: rhbz#691817- Don\'t traceback if disks go missing before/during partitioning. (dlehman) Resolves: rhbz#709961- Remove hasFreeDiskSpace and related code. (dlehman) Resolves: rhbz#683632- ssl: \'noverifyssl\' kernel boot argument. (akozumpl) Resolves: rhbz#696696- edd: fix syntax in situation when two edd directories point to the same device. (akozumpl) Resolves: rhbz#725777
* Wed Jul 27 2011 David Cantrell - 13.21.124-1- Include the files required for libreport. (clumens) Resolves: rhbz#705274- Add libnsspem.so to the stage1 image. (akozumpl) Related: rhbz#696696- edd: do not traceback with cciss devices. (akozumpl) Resolves: rhbz#723194- edd: do not traceback when can not find the respective pci device. (akozumpl) Resolves: rhbz#723344
* Mon Jul 25 2011 David Cantrell - 13.21.123-1- Get the ownership of terminal in stage2 (msivak) Resolves: rhbz#716920- Do not traceback on mpath errors caused by faulty hardware. (akozumpl) Resolves: rhbz#689520- If crashkernel= is given in kickstart, don\'t add crashkernel=auto (clumens). Resolves: rhbz#691910- Check the format of /boot when using EFI (bcl) Resolves: rhbz#689996- Catch .treeinfo errors (bcl) Resolves: rhbz#715130- Don\'t allow creating a new bootloader config in text mode (clumens) Resolves: rhbz#676025
* Thu Jul 21 2011 David Cantrell - 13.21.122-1- Add accelerators to reinitialize dialog (bcl) Resolves: rhbz#673048- Use getDiskPart for efibootmgr (bcl) Resolves: rhbz#704378- Change xhost auth when doing a liveinst. (bcl) Resolves: rhbz#698282- Raise an exception if X
*Display functions fail. (clumens) Related: rhbz#698282- Fix the filter UI to sort capacity as numbers, not characters. (clumens) Resolves: rhbz#614504- Fix the filesystem migration dialog in text mode. (clumens) Resolves: rhbz#688314- Add lvm symlinks to rescue image (mgracik) Resolves: rhbz#676404
* Thu Jul 14 2011 David Cantrell - 13.21.121-1- Fix network --device=bootif value processing in stage2 (vpodzime) Resolves: rhbz#681803- Enable support for static ipv6= cmdline option (rvykydal) Resolves: rhbz#679108- Fix nfsiso install with options (mgracik) Resolves: rhbz#699640- Copy the command stubs test scripts to initrd (mgracik) Resolves: rhbz#706099- Remove raidstart-stub and raidstop-stub (mgracik) Related: rhbz#706099- Improvements to loadkeys-stub (mgracik) Related: rhbz#706099- Add test script for loadkeys-stub (mgracik) Related: rhbz#706099- Improvements to losetup-stub (mgracik) Related: rhbz#706099- Add test script for losetup-stub (mgracik) Related: rhbz#706099- Improvements to list-harddrives-stub (mgracik) Related: rhbz#706099- Add test script for list-harddrives-stub (mgracik) Related: rhbz#706099- Improvements to mknod-stub (mgracik) Related: rhbz#706099- Add test script for mknod-stub (mgracik) Related: rhbz#706099- Compress initrd.img with lzma, not xz (wwoods) Resolves: rhbz#694198
* Fri Jul 08 2011 David Cantrell - 13.21.120-1- Hide header image on all but 800x600 displays (dcantrell). Resolves: rhbz#712487- Use xz compression on initrd.img, add back gfx firmware (dcantrell) Resolves: rhbz#703914- i18n: Maintain the translated repo name upon modifying. (akozumpl) Resolves: rhbz#682599- Handle systems with more than 2147483647 kB of memory (dcantrell). Resolves: rhbz#704593- Remove support for the ext4migrate option (dcantrell). Resolves: rhbz#712195- Use a more general EnvironmentError to catch timezone-file errors. (akozumpl) Resolves: rhbz#718099- edd: refactor and enhance the edd module. (akozumpl) Related: rhbz#694800 Resolves: rhbz#621175- unit tests: provide \'glob.glob\' and \'os.listdir\' in the DiskIO class. (akozumpl) Related: rhbz#621175
* Fri Jul 01 2011 David Cantrell - 13.21.119-1- Pulsing progress bar instead of the static popup during device discovery. (akozumpl) Resolves: rhbz#616641- Add an exception to DUD version checking for 6.0 and 6.1 kernels (msivak) Resolves: rhbz#699745- Keep dracut settings in sets instead of many long strings. (akozumpl) Resolves: rhbz#711002- \'part\' command checks if the disk is partitionable. (akozumpl) Resolves: rhbz#679073- Honor noprobe flag during DUD loading (msivak) Resolves: rhbz#690058- Show a message when ejecting media after test (msivak) Resolves: rhbz#656378- Handle partition allocation failures due to alignment adjustments. (dlehman) Resolves: rhbz#693271- Maximize extended partition even when logical reqs\' sizes are capped. (dlehman) Resolves: rhbz#698429- Don\'t magically adjust fstype when mountpoint is set to \"/boot\". (dlehman) Resolves: rhbz#695362- Implement an option that lets anaconda name mpath devices by the wwid. (akozumpl) Resolves: rhbz#709653- Add the tests/mock framework to rhel6-branch. (akozumpl) Related: rhbz#709653- Remove unused udev_device_is_{multipath,dmraid}_partition functions. (dlehman) Related: rhbz#709653- Generalize some of the device-mapper partition handling. (dlehman) Related: rhbz#709653- Use dm subsystem functions to identify dmraid,mpath partitions. (dlehman) Related: rhbz#709653- In kickstart, specify multipaths by their wwids. (akozumpl) Related: rhbz#709653 Resolves: rhbz#677263- multipath: allow mpath specfifications in kickstart. (akozumpl) Resolves: rhbz#696876- multipath: do not set any mpath aliases explicitly. (akozumpl) Related: rhbz#640735 Resolves: rhbz#674241- Improve parsing and pass the devel flag to loader through the command line (msivak) Related: rhbz#664981- When in devel mode, do not catch tracebacks, we want the core file (msivak) Related: rhbz#664981- Add better debugging capabilities to loader (msivak) Related: rhbz#664981- Allow driver disc to be marked as usable for more than one kernel (msivak) Resolves: rhbz#699745
* Tue Jun 14 2011 David Cantrell - 13.21.118-1- Fix --mtu option to kickstart network command (icomfort) Resolves: rhbz#689081- RAID gui: fix how the \"Number of spares\" spin button is manipulated. (akozumpl) Resolves: rhbz#700804- iscsi: use the --target parameter from the iscsi kickstart command. (akozumpl) Resolves: rhbz#676118- shutdown: kill processes in the anaconda process group. (akozumpl) Related: rhbz#679397- fix mnemonics in the \'Add Repository\' dialog (akozumpl) Resolves: rhbz#679058- imount.c: first wait() for mount then close its stdin/stdout. (akozumpl) Resolves: rhbz#693732- cosmetic, iscsi: make the \'no credentials\' string more general. (akozumpl) Resolves: rhbz#697849- iscsi: disable the \'Login\' button with no nodes selected. (akozumpl) Resolves: rhbz#701220- Fix rebooting after a kickstart error is detected. (akozumpl) Resolves: rhbz#690748
* Tue May 10 2011 David Cantrell - 13.21.117-1- Trim \"/dev/\" from dev.path for all architectures (dcantrell) Resolves: rhbz#702430
* Fri May 06 2011 Chris Lumens - 13.21.116-1- Fix list-harddrives output for CCISS devices (clumens). Resolves: rhbz#702430
* Wed Apr 20 2011 David Cantrell - 13.21.115-1- Write \'edd\' instead of \'ethX\' for fcoe= dracut parameter. (dcantrell) Related: rhbz#692939
* Tue Apr 19 2011 Martin Sivak - 13.21.114-1- Fix SIGSEGV for netwowrk --device= which is not found (rvykydal) Resolves: rhbz#697432- Set mainWindow size request to current res reported by xrandr (dcantrell) Resolves: rhbz#694760
* Mon Apr 18 2011 Martin Sivak - 13.21.113-1- If there are no RAID arrays, do not write an mdadm.conf (clumens). Resolves: rhbz#696907- fipscheck has to be in /usr/bin (mgracik) Resolves: rhbz#692825- Revert \"Don\'t write HWADDR into ifcfg files (rvykydal)\" Related: rhbz#690589- Revert \"Fix traceback of network --device= (rvykydal)\" Related: rhbz#694768
* Wed Apr 13 2011 Martin Sivak - 13.21.112-1- Add more files needed by sshd in fips mode (mgracik) Resolves: rhbz#692825- Fix traceback of network --device= (rvykydal) Resolves: rhbz#694768- Remove maximum limit on EFI partition (bcl) Resolves: rhbz#684860
* Wed Apr 06 2011 David Cantrell - 13.21.111-1- Add libraries needed for fips mode to initrd on s390 (mgracik) Resolves: rhbz#692825- Prevent debug and kdump kernels from becoming the default (dcantrell) Resolves: rhbz#693702- Use znet_cio_free to clear network devices from cio_ignore. (dcantrell) Related: rhbz#633469
* Tue Apr 05 2011 Martin Sivak - 13.21.110-1- Use correct interface to obtain HwAddress property (rvykydal) Resolves: rhbz#693614- Ignore --device=ibft in stage 2 kickstart handling (rvykydal) Related: rhbz#638131 Resolves: rhbz#638131- loader.c: remove stage2param, unused. (akozumpl) Related: rhbz#688757- nfs/kickstart: do not throw away the --opts part (akozumpl) Related: rhbz#688757
* Sat Apr 02 2011 David Cantrell - 13.21.109-1- timeout= in yaboot.conf is in tenths of seconds (dcantrell) Resolves: rhbz#692409- Install dracut-fips package when fips=1 is specified (dcantrell) Resolves: rhbz#692350- Don\'t write HWADDR into ifcfg files (rvykydal) Resolves: rhbz#690589- Stop user if we have no /boot and / is an LV (dcantrell) Related: rhbz#618376- Prevent singlePV lv requests from being > the size of any pv (dcantrell) Related: rhbz#618376- Implement a general version of InstallInterfaceBase.methodstrRepoWindow(). (akozumpl) Related: rhbz#688757
* Tue Mar 29 2011 David Cantrell - 13.21.108-1- Fix missed conversion of createMetadataVer->metadataVersion. (dlehman) Resolves: rhbz#690469- Ensure new kernel is default in zipl.conf on upgrade installs (dcantrell) Resolves: rhbz#683891
* Wed Mar 23 2011 David Cantrell - 13.21.107-1- Don\'t touch resolv.conf which is handled by NM. (rvykydal) Resolves: rhbz#687953- Check size limits on pre-existing partitions (bcl) Resolves: rhbz#684860- Do on-demand scanning of md container if needed. (cherry picked from commit 9f83e8e70302d04b13645d5f65f8be8384bf6547) (dlehman) Resolves: rhbz#683113- Fix kickstart handling of md spares. (cherry picked from commit 7194ca6edd44545037b4aa1f4711996ceffb667d) (dlehman) Resolves: rhbz#683605
* Mon Mar 21 2011 Martin Sivak - 13.21.106-1- Don\'t write out a duplicate mtab to /mnt/sysimage (clumens). Resolves: rhbz#657257- Align lv sizes when adding to vg total space used. (dlehman) Resolves: rhbz#682156- Don\'t include incomplete md arrays in the devicetree. (dlehman) Resolves: rhbz#683614- Only pass --update=super-minor when activating v0 metadata md arrays. (dlehman) Resolves: rhbz#681136- Set context on files as well as directories (clumens). Resolves: rhbz#685090
* Wed Mar 16 2011 Martin Sivak - 13.21.105-1- IB: add missing modules to the image. (akozumpl) Related: rhbz#660686- Support for IPoIB. (akozumpl) Related: rhbz#660686
* Wed Mar 09 2011 David Cantrell - 13.21.104-1- Remove \'Back\' button on depsolving exception for ks installs (dcantrell) Resolves: rhbz#673170- Make our resetFileContext loop truly recursive (clumens). Resolves: rhbz#681494
* Tue Mar 08 2011 David Cantrell - 13.21.103-1- Handle boot loader upgrades on s390 (dcantrell) Resolves: rhbz#682783- Fix test for resized LV to ensure we schedule the format resize action. (dlehman) Resolves: rhbz#681597
* Mon Mar 07 2011 David Cantrell - 13.21.102-1- Fix md array spares test. (dlehman) Related: rhbz#652874- Add /var/lib/yum to the list of directories we set context on (clumens). Resolves: rhbz#681494- Check all PV ancestor devices for growable partitions. (dlehman) Resolves: rhbz#677915- Gotta catch \'em all parted exceptions. (akozumpl) Resolves: rhbz#680248
* Wed Mar 02 2011 David Cantrell - 13.21.101-1- Fixed uninitialized GError
* variable (mganisin) Resolves: rhbz#681511- Remove \'Back\' button on depsolving exception for ks installs (dcantrell) Resolves: rhbz#673170- Ensure remount requests go through isys.mount() (dcantrell) Resolves: rhbz#678520- Do not activate first ks network device in non-network installs. (rvykydal) Related: rhbz#638131
* Wed Feb 23 2011 David Cantrell - 13.21.100-1- Fix problem with /boot on LVM on a zFCP multipath device (dcantrell) Related: rhbz#670856- Don\'t show the cleardisk dialog on upgrades (clumens). Resolves: rhbz#679725- Add the fipscheck library (mgracik) Resolves: rhbz#679072- Fix downloading .treeinfo files for --noverifyssl repos. (akozumpl) Resolves: rhbz#678574- Only apply global passphrase to devices with no passphrase. (dlehman) Resolves: rhbz#679224- Write --noverifyssl to repos and urls in kickstart where fit. (akozumpl) Resolves: rhbz#678576
* Mon Feb 21 2011 Martin Sivak - 13.21.99-1- Be better at handling killed metacity. (akozumpl) Resolves: rhbz#677605- Fix calculation of md array spare count. (dlehman) Resolves: rhbz#678028- Revert \"beaker debugging\" (pushed by accident, was just a debugging patch) (akozumpl) Related: rhbz#677689- Support cciss devices in get_sysfs_path_by_name(). (akozumpl) Resolves: rhbz#677689
* Tue Feb 15 2011 David Cantrell - 13.21.98-1- Halt build if ramdisk.image.gz on ppc64 is too large. (dcantrell) Related: rhbz#675685- s390x has firstboot now (dcantrell) Related: rhbz#463564- Don\'t add --enablefingerprint unless fprintd-pam is installed (clumens). Resolves: rhbz#676854
* Thu Feb 10 2011 David Cantrell - 13.21.97-1- Fix mis-management of luks dict when renaming encrypted lvs. (dlehman) Resolves: rhbz#674773- iscsi: better IBFT logging. (akozumpl) Related: rhbz#529443
* Tue Feb 08 2011 David Cantrell - 13.21.96-1- Fix logMessage() call in loader/cdinstall.c (dcantrell) Related: rhbz#604614
* Tue Feb 08 2011 David Cantrell - 13.21.95-1- Ensure ppc64 ramdisk.image file is <= 32MB (dcantrell) Resolves: rhbz#675685- Perform terminations before unmounting filesystems on shutdown. (dlehman) Resolves: rhbz#604614- Include killall5 and pidof from sysvinit-tools in the initrd. (dlehman) Related: rhbz#604614- Don\'t unmount /proc or /sys during shutdown. (dlehman) Related: rhbz#604614- Remove unused lochangefd functionality. (dlehman) Related: rhbz#604614- Don\'t transfer the stage2 image to the target system. (dlehman) Related: rhbz#604614- URL installs no longer have special memory requirements. (dlehman) Related: rhbz#604614- Always put stage2 into RAM. (dlehman) Related: rhbz#604614- In text mode we have to treat strings and lists separately while printing them (msivak) Resolves: rhbz#674322
* Thu Feb 03 2011 Martin Sivak - 13.21.94-1- Don\'t write our own udev persistent net rules; use udev\'s generator. (notting) Resolves: rhbz#674685- There\'s no more MainframeDiskDevice, so don\'t call its __str__ (clumens) Resolves: rhbz#674242- Honour network --nodefroute option also in case of network configuration. (rvykydal) Related: rhbz#638131- Set default resolution of anaconda.glade to 800x600 (dcantrell) Related: rhbz#663411- Make singlePV a more useful boolean, clean up _getSinglePV() (dcantrell) Related: rhbz#618376- Sort singlePV=True requests so they come first. (dcantrell) Related: rhbz#618376- Remove width and height parameters from gui.readImageFromFile() (dcantrell) Related: rhbz#663411- Do not scale image on welcome screen. (dcantrell) Related: rhbz#663411
* Thu Jan 27 2011 David Cantrell - 13.21.93-1- Move reipl step to be after instbootloader step. (dcantrell) Related: rhbz#618376- Remove \'Change device\' button from bootloader screen on EFI systems (wwoods) Resolves: rhbz#582143- Remove forced 800x600 geometry switch for Xvnc (dcantrell) Related: rhbz#663411- Disable partition resize support for DASD labels (dcantrell) Resolves: rhbz#605912
* Wed Jan 26 2011 Martin Sivak - 13.21.92-1- Add noeject support anaconda (bcl) Resolves: rhbz#665094- Add noeject support to loader (bcl) Related: rhbz#665094 Resolves: rhbz#665094- biosdevname is in sbin not bin (mgracik) Related: rhbz#654063- Initialize loaderData values in kickstart network command. (rvykydal) Resolves: rhbz#638131- Always activate first kickstart network device (rvykydal) Resolves: rhbz#668395- Make kickstart network command reconfigure active device in loader (rvykydal) Resolves: rhbz#668395- Use NM for ibft configuration (rvykydal) Resolves: rhbz#634016- Reset only ifcfg file of device we failed to activate (rvykydal) Resolves: rhbz#638131- Initialize iface structure properly (rvykydal) Resolves: rhbz#638131- Add kickstart network --nodefroute option (rvykydal) Resolves: rhbz#638131- Add support for ks network --bootproto=ibft (rvykydal) Resolves: rhbz#638131- Wait for activation of specific devices instead of NM (rvykydal) Resolves: rhbz#638131- Parse all kickstart network commands in loader too (rvykydal) Resolves: rhbz#638131- Activate all devices set by kickstart network --activate command (rvykydal) Resolves: rhbz#638131- Pick RHEL6 kickstart superclass in rhel 6 (rvykydal) Related: rhbz#638131- VNC does not support runtime SecurityTypes changes (mgracik) Resolves: rhbz#670832
* Tue Jan 25 2011 Martin Sivak - 13.21.91-1- Add confirmation dialog to dlabel code and make one DD dialog less confusing (msivak) Resolves: rhbz#669647
* Mon Jan 24 2011 David Cantrell - 13.21.90-1- Make sure /sbin/biosdevname is included in initrd.img (dcantrell) Related: rhbz#654063- gui: remove \"swapped\" attribute from anaconda.glade (akozumpl) Related: rhbz#663411- Introduce flags.preexisting_x11. (akozumpl) Related: rhbz#663411- Adjust main window size based on install type. (bcl) Related: rhbz#663411- Run anaconda in fullscreen mode (clumens). Resolves: rhbz#663411- On interactive text kickstart installs, still skip certain steps (clumens). Resolves: rhbz#652222- Make sure /boot is mapped to a single LVM PV on s390x (dcantrell) Related: rhbz#618376- Unmount filesystems before shutdown or reboot on s390x (dcantrell) Resolves: rhbz#605577- Make the advanced storage dialogs stay in the foreground. (akozumpl) Resolves: rhbz#671107- Revert \"Bold the warning for GPT on non-EFI (bcl) Resolves: rhbz#614585
* Thu Jan 20 2011 Martin Sivak - 13.21.89-1- Don\'t offer minors of ignored md devices when creating new md devices. (dlehman) Resolves: rhbz#559973- Make sure devices ignored by the devicetree are in _ignoredDisks. (dlehman) Related: rhbz#559973- Do disklabel handling for whole disk formats unknown to anaconda (hdegoede) Resolves: rhbz#619721- Add support for detecting lvm vorigin snapshot volumes. (dlehman) Resolves: rhbz#633038- Don\'t display free space at end of extended unless > 1MB. (dlehman) Resolves: rhbz#626025- Don\'t try to add spares to active md arrays. (dlehman) Resolves: rhbz#652874- Fix booty error on s390 when /boot is not on LVM. (dcantrell) Related: rhbz#618376- Add biosdevname to installer environment (dcantrell) Resolves: rhbz#654063- Fix the traceback from afbf164a1ce35aef50075cf0e22b9ece057bf1a1. (akozumpl) Related: rhbz#640735- mpath: create /etc/multipath/bindings file. (akozumpl) Resolves: rhbz#640735
* Tue Jan 18 2011 Martin Sivak - 13.21.88-1- When discovering dirtiness of filesystems, mount the /mnt/sysimage read only (msivak) Resolves: rhbz#601862- If DD cannot be copied to destination, only throw error into log file (msivak) Resolves: rhbz#640260- Don\'t assume BOOTIF present for ksdevice=bootif. (rvykydal) Related: rhbz#647462- We have to mount /boot/efi when we find an old one. (pjones) Related: rhbz#593984- Only allow one EFI System Partition to exist at a time. (pjones) Resolves: rhbz#593984- Check fstab entries against fmt.mountType not fmt.type (pjones) Resolves: rhbz#594032- Fix writing of network --hostname option in generated ks. (rvykydal) Related: rhbz#643008- Bold the warning for GPT on non-EFI (bcl) Related: rhbz#614585 Resolves: rhbz#614585- Warn the user when using a GPT bootdisk on non-EFI systems (bcl) Resolves: rhbz#614585- Support /boot on logical volume on s390x (dcantrell) Resolves: rhbz#618376- Update example ssh command in linuxrc.s390 (dcantrell) Related: rhbz#621590- Start rsyslogd from linuxrc.s390 (dcantrell) Resolves: rhbz#601337- Update spinbutton value in dialogs (bcl) Related: rhbz#621490 Resolves: rhbz#621490
* Wed Jan 12 2011 Martin Sivak - 13.21.87-1- Use the same error message in text mode and GUI (rvykydal) Resolves: rhbz#625809- mpath: use both \'multipath -d\' and \'multipath -ll\' to get the topology. (akozumpl) Related: rhbz#636570- mpath: remove a harmful udev_trigger() in filter_gui (akozumpl) Related: rhbz#636570- Merge rsyslogd from master, the loader part. (akozumpl) Related: rhbz#601337- ppc: do not allow creating a second PReP partition on one drive. (akozumpl) Resolves: rhbz#625831- image: put nss libraries to /usr/lib/ where they belong. (akozumpl) Resolves: rhbz#667122- Properly identify device-mapper partitions set up by kpartx. (dlehman) Resolves: rhbz#659324- mpath: filter out the slave devices and their partitions Related: rhbz#659324
* Thu Jan 06 2011 Martin Sivak - 13.21.86-1- Use a different method to get the sysfs_path for device-mapper devices. (clumens) Related: rhbz#591713- Allow existing /var/log during liveinst (bcl) Resolves: rhbz#667606
* Tue Jan 04 2011 Martin Sivak - 13.21.85-1- Merge rsyslogd from master, the buildinstall parts. (akozumpl) Related: rhbz#601337- Use cio_ignore and
*_cio_free commands in linuxrc.s390 (dcantrell) Resolves: rhbz#633469- Add /sbin/cio_ignore to the KEEPFILE list on s390x (dcantrell) Related: rhbz#633469- Remove MainframeDiskDevice class, use description property. (dcantrell) Related: rhbz#632325- Change the device reinitialization dialog (mgracik) Resolves: rhbz#657376- Fix looking up storage device IDs when writing out anaconda-ks.cfg (clumens). Resolves: rhbz#591713- mpath: make sure /var/log exists exists early. (akozumpl) Related: rhbz#636570- mpath: flush mpath devices in iw/filter_gui.py (akozumpl) Resolves: rhbz#636570- mpath: log the /etc/multipath.conf contents (akozumpl) Related: rhbz#636570- logging: put timestamps in /tmp/syslog. (akozumpl) Related: rhbz#636570
* Mon Dec 13 2010 Martin Sivak - 13.21.84-1- memory: bump epsilon in within_available_memory() (akozumpl). Resolves: rhbz#624355- Use chreipl to set the IPL device on s390x (dcantrell) Resolves: rhbz#632325- Add /usr/sbin/chreipl to KEEPFILE. (dcantrell) Related: rhbz#632325- Create a MainframeDiskDevice class for common s390 attributes. (dcantrell) Related: rhbz#632325- Do not shut down zFCP storage in Storage.shutdown() (dcantrell) Resolves: rhbz#612626- Clarify the ssh modes for installation on s390x (dcantrell). Resolves: rhbz#621590- Set installer environment hostname for sw raid LABELs (rvykydal) Resolves: rhbz#640743- Improve network (ifcfg) logging (rvykydal). Resolves: rhbz#642998- Do not backtrace if repo is specified through kickstart only (akozumpl). Related: rhbz#632526 Resolves: rhbz#659781- Add proxy handling to .treeinfo (bcl) Resolves: rhbz#634655- Move setProxy to AnacondaYum (bcl) Related: rhbz#634655 Resolves: rhbz#634655- Restore list-harddrives output to what users expect (dcantrell) Resolves: rhbz#654436- Permit ext4 and ext2 for /boot on s390x (dcantrell) Resolves: rhbz#638734- Check for ARPHRD_ETHER and ARPHRD_SLIP types in getDevices (dcantrell) Resolves: rhbz#596826- Fix \"logvol --percent=\" (jruemker). Resolves: rhbz#651445- Update generating of anaconda-ks.cfg for ipv6 (rvykydal) Resolves: rhbz#643008- Fix default of network --device option to match rhel5 (rvykydal). Resolves: rhbz#647462- Update ks network command for ipv6 in stage 2 (rvykydal) Resolves: rhbz#643005- gui: hide text in the proxy password field (akozumpl). Resolves: rhbz#611825- support for partial offload in udev_
*_iscsi() functions. (akozumpl) Related: rhbz#442980- iscsi: partial offload drivers. (akozumpl) Related: rhbz#442980- Add command-line.txt back into the package (clumens). Resolves: rhbz#650316- Revert \"Do not use _rnetdev as fstab option for network based /\" (clumens) Resolves: rhbz#644525- Don\'t ignore %packages if --default is given (dcantrell). Resolves: rhbz#621349- Don\'t traceback when displaying %post error messages (clumens). Resolves: rhbz#654074- Display a warning message on TAINT_HARDWARE_UNSUPPORTED (clumens). Resolves: rhbz#623140- If getting .treeinfo fails, try treeinfo (clumens). Resolves: rhbz#635065- Add rdate, tty, which to install image (mgracik) Resolves: rhbz#654432- Fix a missing _ped import. (clumens) Resolves: rhbz#640829- Focus the window after changing language (mgracik) Resolves: rhbz#628426- Ignore immutable disks in clearPartitions (bcl) Resolves: rhbz#657115 Related: rhbz#614812- Rescan disks when moving back through upgrade check (bcl) Resolves: rhbz#614812- Enable network when getting .treeinfo (rvykydal) Resolves: rhbz#632526- Preset default config for immediate Close in nm-c-e enablement (rvykydal) Resolves: rhbz#636526- Write out correct nfs url for repo= in /root/anaconda-ks.cfg (rvykydal) Resolves: rhbz#635201- Fix non-dhcp network enablement in stage 2 (rvykydal) Resolves: rhbz#641324- Do not try to prompt for network for escrow in kickstart (rvykydal) Resolves: rhbz#636533- After cancelled stage 2 network enablement remove temporary repo (rvykydal) Resolves: rhbz#623641- Fix traceback when using duplicate name for added/edited repo (rvykydal) Resolves: rhbz#623149- Add support for ipv6 to text UI network enablement (rvykydal) Resolves: rhbz#612476- Remember user\'s choice when going back in Configure TCP/IP (rvykydal) Resolves: rhbz#609570- It\'s /usr/bin/gdbserver. (akozumpl) Related: rhbz#442980- Handle dm-N devices pointed to by /dev/disk/ paths (bcl) Related: rhbz#605312 Resolves: rhbz#605312- Resolve /dev/disk/ devices during rescue (bcl) Resolves: rhbz#605312- Add ntpdate to install.img (mgracik) Resolves: rhbz#614399- Do not auto-check all drives when creating a RAID partition (akozumpl). Resolves: rhbz#641910- (Un)select all button in Partition Editor. (akozumpl) Related: rhbz#641910- iscsi, cosmetic: fix grammar in the iscsi dialogs. (akozumpl) Related: rhbz#607827- iscsi: call iscsi.stabilize() at the end of the iscsi configuration. (akozumpl) Related: rhbz#607827- iscsi: consolidate logging in the UI (akozumpl) Related: rhbz#607827- iscsi: allow separate discovery/login credentials in TUI. (akozumpl) Related: rhbz#607827- iscsi: migrate the CRED_ constants and parse_ip() to partIntfHelpers. (akozumpl) Related: rhbz#607827- iscsi gui: use abstract methods in the iSCSIWizard interface. (akozumpl) Related: rhbz#607827- iscsi gui: factor out the drive adding code. (akozumpl) Related: rhbz#607827- iscsi gui: make the iSCSI wizard never return gtk constants. (akozumpl) Related: rhbz#607827- text.messageWindow(): make it more resilient to the input. (akozumpl) Related: rhbz#607827- iscsi: copyright notice in add_drive_text.py (akozumpl) Related: rhbz#607827- iscsi: discovery and node login wizard. (akozumpl) Related: rhbz#607827- ui: C_reate mnemonics in Create Storage dialog (akozumpl). Resolves: rhbz#626600- Use SHA-512 for bootloader password encryption (mitr) Related: rhbz#554874- Set focus after error message (tmlcoch) Resolves: rhbz#611430- Fix support for \"part --ondisk=/dev/disk/by-...\" (clumens). Resolves: rhbz#621515
* Mon Oct 18 2010 Chris Lumens - 13.21.83-1- Add the subscription manager yum plugin (dgregor). Resolves: rhbz#643438
* Mon Aug 30 2010 David Cantrell - 13.21.82-1- Disable BETANAG for RHEL6 (clumens). Resolves: rhbz#628459
* Wed Aug 25 2010 David Cantrell - 13.21.81-1- mpath: put quotes around the wwids, they can have spaces. (akozumpl) Related: rhbz#626842- filtering UI: don\'t be picky about udev wwid length. (akozumpl) Related: rhbz#626842- Use ID_SERIAL_RAW for multipath, if available (clumens). Resolves: rhbz#626842
* Tue Aug 24 2010 David Cantrell - 13.21.80-1- mpath: filter member partitions wiser in lvm. (akozumpl) Related: rhbz#624175- mpath: do not deactivate mpath partitions in teardown(). (akozumpl) Related: rhbz#624175
* Thu Aug 19 2010 David Cantrell - 13.21.79-1- lvm: filter \'sda[0-9]
*\' when filtering \'sda\' (akozumpl) Resolves: rhbz#624175- mpath: do not deactivate mpath device upon its teardown. (akozumpl) Related: rhbz#624175
* Tue Aug 17 2010 David Cantrell - 13.21.78-1- Fix the provides we look for when installing DUD (msivak) Resolves: rhbz#618862
* Mon Aug 16 2010 David Cantrell - 13.21.77-1- Fix the paths for DD in postinstall phase (msivak) Related: rhbz#619745
* Fri Aug 13 2010 David Cantrell - 13.21.76-1- NetworkManager uses a different config file now (clumens). Resolves: rhbz#623937- mpath: teardown format from MultipathDevice.teardown() (akozumpl). Resolves: rhbz#616273- Do not use autoconfiguration for DHCPv6 (rvykydal) Resolves: rhbz#623216- Remove spurious colon (misvak) Related: rhbz#619745
* Thu Aug 12 2010 David Cantrell - 13.21.75-1- Fix \"Cancel\" in stage 2 network enablement dialog (rvykydal) Resolves: rhbz#623151- Proper detection of successful module update (msivak) Resolves: rhbz#618862- We checked for updated driver with wrong path prefix (msivak) Resolves: rhbz#619745
* Wed Aug 11 2010 David Cantrell - 13.21.74-1- LVM and LUKS now align everything to 1MB boundaries. (dlehman) Resolves: rhbz#623458
* Wed Aug 11 2010 David Cantrell - 13.21.73-1- Rebuild to include latest translation updates Resolves: rhbz#593202
* Tue Aug 10 2010 David Cantrell - 13.21.72-1- Translate task and repo names based on the product.img (clumens). Resolves: rhbz#622064
* Tue Aug 10 2010 David Cantrell - 13.21.71-1- Rebuild to include latest translation updates Resolves: rhbz#527925
* Fri Aug 06 2010 David Cantrell - 13.21.70-1- Require newest pykickstart. (david.l.cantrell) Related: rhbz#620855- Correct processing of driverdisk --biospart=. (clumens) Related: rhbz#620855- Log exclusiveDisks, ignoredDisks, and reasons for ignoring devices. (dlehman) Related: rhbz#596468- Include mpath/fwraid member devices in exclusiveDisks. (dlehman) Resolves: rhbz#596468- Use full EFI path to map drives for grub (bcl) Resolves: rhbz#598572
* Thu Aug 05 2010 David Cantrell - 13.21.69-1- Use part instead of device in PartitionWindow.populate() (dcantrell) Resolves: rhbz#575749- Display the method selection details dialog on boot.iso (clumens). Resolves: rhbz#620746- mpath: add MultipathDevices first, before their partitions. (akozumpl) Related: rhbz#595866 Resolves: rhbz#615987
* Wed Aug 04 2010 David Cantrell - 13.21.68-1- Fix typo and set mpaths\' sysfs path before querying udevdb. (dlehman) Resolves: rhbz#620712
* Tue Aug 03 2010 David Cantrell - 13.21.67-1- Honor bootdrive selection when autopartitioning (hdegoede) Resolves: rhbz#620442- mdadm -I no longer accepts --no-degraded (hdegoede) Resolves: rhbz#620359- Set AUTO_VLAN=yes in fcoe config files (dcantrell) Resolves: rhbz#618875- ibft: always configure network devices if there\'s ibft available (akozumpl). Resolves: rhbz#617860
* Fri Jul 30 2010 Chris Lumens - 13.21.66-1- fix typo in 7c540b2cd19db3e098e768f88ac8a42272b22e06 (akozumpl) Resolves: rhbz#619659
* Thu Jul 29 2010 David Cantrell - 13.21.65-1- Fix quoting that was causing boot.iso to not be made (dgregor). Resolves: rhbz#619279
* Thu Jul 29 2010 David Cantrell - 13.21.64-1- Add missing parameter (rvykydal) Resolves: rhbz#619269
* Wed Jul 28 2010 David Cantrell - 13.21.63-1- DEBUG -> DEBUGLVL (dcantrell) Related: rhbz#611154- Make sure multipathd starts on systems using mpath storage (dcantrell) Resolves: rhbz#615040
* Wed Jul 28 2010 David Cantrell - 13.21.62-1- Check if an mpath should be ignored before adding it to the devicetree. (dlehman) Resolves: rhbz#596468- Add handling for mpath and fwraid devices in exclusiveDisks. (dlehman) Related: rhbz#596468- Add functions to identify specific types of device-mapper devices. (dlehman) Related: rhbz#596468- Ignore active fwraids and mpaths when setting up the filter ui. (dlehman) Related: rhbz#596468- Handle systems where all disks have a whole disk format (dcantrell) Resolves: rhbz#617554- Include modprobe file for Mellanox 10GB driver (dcantrell) Resolves: rhbz#611997- Revert \"Set stage2= on x86 boot.iso\" (clumens) Related: rhbz#611154- Skip the askmethod dialog on boot.iso+method= (clumens). Resolves: rhbz#611154
* Fri Jul 23 2010 David Cantrell - 13.21.61-1- does not properly recognize hpt45x_raid_member (hdegoede) Resolves: rhbz#617438- Show allowable prepboot size range in exception (dcantrell) Resolves: rhbz#603188- Skip the Filter UI in Basic Storage mode (hdegoede) Resolves: rhbz#605544- Propagate MACADDR from loaderData to iface (dcantrell) Resolves: rhbz#595388- Only write changed DASD attributes to rd_DASD params (dcantrell) Resolves: rhbz#606783
* Tue Jul 20 2010 David Cantrell - 13.21.60-1- Support for ks: --ipv6 command, and ipv6 values for --gateway (rvykydal) Resolves: rhbz#490794- Enforce limits on partition start/end sectors. (dlehman) Related: rhbz#604059- Revert \"Add \"askmethod\" as a default argument.\" (clumens) Related: rhbz#611154- Don\'t skip method selection if using media with no packages (clumens). Resolves: rhbz#611154- Handle serial = None in the right place (clumens). Resolves: rhbz#615936
* Fri Jul 16 2010 David Cantrell - 13.21.59-1- Add uname to initrd.img (dcantrell) Resolves: rhbz#614770- Permanently skip the filter UI steps in text mode (clumens). Resolves: rhbz#611000- Fix indentypo (rvykydal) Resolves: rhbz#614001- Fix config of ipv6 and ipv4 (auto + manual) in loader (rvykydal) Resolves: rhbz#609576- Reset resolver after network device activation (rvykydal) Resolves: rhbz#614001- Use blacklist_exceptions for mpath devices (mfuruta) Resolves: rhbz#612399- Revert \"Skip the bootloader placement window if we\'re on UEFI (pjones)\" Resolves: rhbz#582143
* Wed Jul 14 2010 David Cantrell - 13.21.58-1- Use long ints for comparisons, not floats (bcl) Related: rhbz#608172- Enforce the same logic on autopart shrink as on resize (bcl) Related: rhbz#608172- Don\'t crash when putting mpath devices into the filter name cache (clumens). Resolves: rhbz#597223
* Thu Jul 08 2010 David Cantrell - 13.21.57-1- Handle 16 digit hex strings for ID_SERIAL_SHORT (dcantrell) Resolves: rhbz#611554- Focus default advanced storage type in add dialog (dcantrell) Resolves: rhbz#603726- Add multipath member with addUdevDiskDevice instead of DiskDevice (dcantrell) Resolves: rhbz#582254- Pass short type names for PartSpec ctor. (dlehman) Related: rhbz#579715- During an update don\'t erase old kernels (bcl) Resolves: rhbz#594411- Fix a file descriptor leak in getDevices (mganisin). Resolves: rhbz#612153- Pass size of structure not a size of ointer to calloc (msivak) Resolves: rhbz#592227- Properly iterate over the netdevices list (clumens). Resolves: rhbz#610769
* Wed Jun 30 2010 David Cantrell - 13.21.56-1- Translate MAC addresses to devices in the second stage, too. (clumens) Related: rhbz#185522- Fix prototype of getIPAddresses (rvykydal) Resolves: rhbz#605659- anaconda\'s lvm vgreduce invocation is not filtering out disks (hdegoede) Resolves: rhbz#609479
* Tue Jun 29 2010 David Cantrell - 13.21.55-1- Write out missing space on \'part\' lines in ks file (dcantrell) Resolves: rhbz#605938- Make sure swap devices are included in dracut args (dcantrell) Resolves: rhbz#607646- Catch DeviceNotFoundError in cleardisks (dcantrell) Resolves: rhbz#607661- anaconda: Disable X server regenerations (ajax) Resolves: rhbz#609245- Do not proceed after partitioning errors in text mode (bcl) Resolves: rhbz#599484- Add a slash to the path pointing to hdinstall dir (msivak) Resolves: rhbz#592154- Check for proper Proxy URL in loader (bcl) Resolves: rhbz#604126- Don\'t resize lv\'s formatting unless also resizing the lv. (dlehman) Resolves: rhbz#575046- Use progressbar instead of waitwindow for repo setup (rvykydal) Resolves: rhbz#584996- Account for ipv6 addresses too (rvykydal) Resolves: rhbz#605659- Don\'t deactivate active device before running nm-c-e (rvykydal) Resolves: rhbz#608773- Clean up proxy handling in yuminstall.py (bcl) Resolves: rhbz#604137- Add full proxy URL to writeKS (bcl) Related: rhbz#602705 Resolves: rhbz#602705- loader: print if anaconda was killed by a signal and dump core. (akozumpl) Related: rhbz#607650- fixup exclude/excludepkgs usage (bcl) Resolves: rhbz#607664- Control all devs by NM by default + filtering (iSCSI, FCoE) (rvykydal) Resolves: rhbz#606745- network.dracutSetupstring: properly handle ipv6 (hdegoede) Resolves: rhbz#605232- Support for converged traffic during install to FCoE LUN (hdegoede) Resolves: rhbz#604763- Show sane non-removable drives too in the DD dialog (msivak) Resolves: rhbz#594548
* Sat Jun 26 2010 David Cantrell - 13.21.54-1- Take into account the fact that some formats have no min/max size. (dlehman) Related: rhbz#603188- Add more stuff to the install image for report (clumens). Resolves: rhbz#605958- Put dhcp configuration files in /etc/dhcp (dcantrell) Resolves: rhbz#607741- Enforce format min/max size for fixed-size requests. (dlehman) Resolves: rhbz#603188- Fix min/max size definitions for PReP Boot format class. (dlehman) Related: rhbz#603188- Constrain lvmpv, mdmember, and swap partitions to a single disk. (dlehman) Resolves: rhbz#605756- Enforce maximum start sector for partitions. (dlehman) Resolves: rhbz#604059- Handle nm-c-e using prefix instead of netmask (hdegoede) Resolves: rhbz#607762- Fix repo --includepkgs=, and add more to anaconda-ks.cfg\'s repo line (clumens). Resolves: rhbz#602705- yum calls it \"exclude\" instead of \"excludepkgs\" (clumens). Resolves: rhbz#607664- Force the comps object to be reloaded after adding repos (clumens). Resolves: rhbz#606765- Remove reference to undefined variable (rvykydal) Resolves: rhbz#604164
* Tue Jun 22 2010 David Cantrell - 13.21.53-1- Be specific when telling lvm to ignore devices. (dlehman) Resolves: rhbz#594433 Related: rhbz#578813- Use baseurl instead of methodstr to get .treeinfo (rvykydal) Resolves: rhbz#604246- rpm doesn\'t always give the callback a tuple (clumens). Resolves: rhbz#605172- Handle questionInitializeDASD in cmdline mode (dcantrell) Resolves: rhbz#605846- Set SELinux context on dasd.conf and zfcp.conf (dcantrell) Resolves: rhbz#605597- Add --fsprofile= to the anaconda-ks.cfg (clumens). Resolves: rhbz#605944- Check before running post scripts on kickstart rescue (atodorov). Resolves: rhbz#605755- Automatic partitioning should yield no more than one PReP partition. (dlehman) Resolves: rhbz#579715- Put [] around ipv6 addr on the dracut cmdline (hdegoede) Resolves: rhbz#605300- Set repo.proxy only after fully assembled (bcl) Resolves: rhbz#602712 Related: rhbz#602712- Change proxy regex in loader to match python proxy regex (bcl) Resolves: rhbz#602712 Related: rhbz#602712- Add test cases for proxy regex (bcl) Resolves: rhbz#602712 Related: rhbz#602712- Replace POSIX regex classes with character ranges (bcl) Resolves: rhbz#602712
* Fri Jun 18 2010 David Cantrell - 13.21.50-9- Revert \"Select default and mandatory packages when enabling repos.\" (clumens). Resolves: rhbz#605289
* Thu Jun 17 2010 David Cantrell - 13.21.52-1- Set wireless devices to NM_CONTROLLED by default (rvykydal) Resolves: rhbz#594881- gui: \"_use anyway\" mnemonic. (akozumpl) Resolves: rhbz#603137- Add iSCSI radio button to button group (dcantrell) Resolves: rhbz#603726- Honor --timeout=NUM from kickstart files on s390 (dcantrell) Resolves: rhbz#603032- Use Decimal instead of float for label calculations (bcl) Resolves: rhbz#604639- Fix a typo (rvykydal) Resolves: rhbz#604628- fix: zfcp.startup() survives without an interface (akozumpl). Resolves: rhbz#604542
* Thu Jun 17 2010 David Cantrell - 13.21.50-8- Add md arrays to the devicetree with a md# name rather then md/# (hdegoede) Related: rhbz#591970- Handle FCoE over vlan properly (hdegoede) Resolves: rhbz#486244- No longer remove persistent udev rules files (clumens) Resolves: rhbz#605262
* Wed Jun 16 2010 David Cantrell - 13.21.50-7- Fall back on regular device name (dcantrell) Resolves: rhbz#604776
* Mon Jun 14 2010 David Cantrell - 13.21.51-1- Properly rescan storage with Reset in partition GUI (bcl) Related: rhbz#595659 Resolves: rhbz#595659- Save the partition type selection when moving back (bcl) Related: rhbz#595659 Resolves: rhbz#595659- Properly rescan disks when moving back (bcl) Related: rhbz#595659 Resolves: rhbz#595659- Show zFCP errors in dialog boxes rather than tracebacks (maier) Resolves: rhbz#598087- Show by-path names for DASD and zFCP, WWID for mpath (maier) Resolves: rhbz#580507- Remember autopart UI choice when going back (dcantrell) Resolves: rhbz#596146- Make parent directories for ks scriptlet log files (dcantrell) Resolves: rhbz#597279- Do not ask for interface twice in stage 1 (rvykydal) Resolves: rhbz#594802- Fix parsing of ifcfg OPTIONS parameter (rvykydal) Resolves: rhbz#597205- Don\'t overwrite 70-persistent-net.rules (rvykydal) Resolves: rhbz#597625- Wait only for activation of devices controlled by NM (rvykydal) Resolves: rhbz#598432- Add the .sshd.hmac file to initrd (mgracik) Resolves: rhbz#592186- Raise an exception when an md dev is in the tree under the wrong name (hdegoede) Related: rhbz#591970- Make sure lvm2 gets installed when we are using lvm (hdegoede) Resolves: rhbz#601644- Fix backtrace when a vg starts with freespace (hdegoede) Resolves: rhbz#597925- Add md arrays to the devicetree with a md# name rather then md/# (hdegoede) Related: rhbz#591970- Handle FCoE over vlan properly (hdegoede) Resolves: rhbz#486244- Ignore errors upon restoring /lib and /usr after unmounting filesystems (hdegoede) Related: rhbz#598222- Make sure we still have an elf interpreter after unmounting fs (hdegoede) Resolves: rhbz#598222- Rebind hybrid lcs/ctc network devices to correct driver if necessary (maier) Related: rhbz#561814 Resolves: rhbz#596826 Related: rhbz#557522- Get netdev name without CONFIG_SYSFS_DEPRECATED_V2 in linuxrc.s390 (maier) Resolves: rhbz#596826- Replace rd_CCW with final dracut option rd_ZNET for network-rootfs on s390 (maier) Related: rhbz#577193 Related: rhbz#533494- Do parse DOMAIN for DNS search suffixes in loader (maier) Resolves: rhbz#595388- Allow loader to parse DNS and write DNS1, DNS2, ... itself (again). (maier) Resolves: rhbz#595388- GATEWAY in linuxrc.s390\'s ifcfg is really IPv4 only (maier) Resolves: rhbz#595388- Handle OPTIONS in ifcfg files transparently in loader (dcantrell) Resolves: rhbz#595388- Catch and display KickstartErrors coming from execute() cleanly (clumens). Resolves: rhbz#603059- Forcibly remove packages from deselected groups (clumens). Resolves: rhbz#495621- Default to aes-xts-plain64 for new luks devices. (dlehman) Resolves: rhbz#600295- Make minimum shrink size 1 not 0 (bcl) Resolves: rhbz#602442- Initialize Decimal for partition slices (bcl) Related: rhbz#599614 Resolves: rhbz#602376- Fix driver disc repo baseurl (msivak) Resolves: rhbz#602343- or -> and (clumens) Related: rhbz#594803- fix: kickstart sshpw command dysfunctional (akozumpl). Resolves: rhbz#602308- Include /sbin/blkid in the initrd.img (dcantrell) Related: rhbz#599197 Related: rhbz#591970- Correct initrd.img load address on s390 (dcantrell) Related: rhbz#546422- \"Finding\" -> \"Examining\" storage devices (clumens). Resolves: rhbz#594804- In the filter UI, also ignore devices that do not report a size (clumens). Resolves: rhbz#594803- translations: loader header files strings missing in anaconda.pot. (akozumpl) Related: rhbz#598413- Re-get partedPartition after re-adding failed-to-remove partition. (dlehman) Related: rhbz#592339 Resolves: rhbz#602351- Select default and mandatory packages when enabling repos. (dlehman) Related: rhbz#561164- Minor fix for parsing of \"multipath -d\" (pjones) Resolves: rhbz#592297- loader: con Newt into thinking LANG is always en_US.UTF-8 (akozumpl). Resolves: rhbz#601101- translations: xgettext: _P for plural forms takes two arguments (akozumpl). Resolves: rhbz#598413- fix: the po path has to be bound for gtk.glade too. (akozumpl) Related: rhbz#598413- translations: don\'t say context=yes if you don\'t mean it. (akozumpl) Related: rhbz#598413- fix error saving screenshots during package install (akozumpl). Resolves: rhbz#594826- The keyboard object is in instdata on rhel6 (clumens). Resolves: rhbz#601159- Remember disk selections when going back to the text partition UI (clumens). Resolves: rhbz#596113- Fix green strips showing up in partition dialog (bcl) Resolves: rhbz#599614- Assign the trimmed identifier so it gets used in the UI. (clumens) Related: rhbz#560666- Remember when IPv4 IPADDR has been read from ifcfg file in loader (maier) Resolves: rhbz#595388- Don\'t let loader write HWADDR to ifcfg file on s390. (maier) Resolves: rhbz#595388- Tell which stacks to configure in /etc/sysconfig/network on s390 (maier) Resolves: rhbz#595388- Really ignore deprecated parm/conf file options in linuxrc.s390 (maier) Resolves: rhbz#595388- Correctly pass netdev name from linuxrc.s390 to loader (maier) Resolves: rhbz#595382- Re-enable usable pdb with vnc on s390x (maier) Related: rhbz#597223- Fix most of what is necessary for install over IPv6 on s390 (dcantrell) Resolves: rhbz#594090- Only kill init for reboot/halt and then exit linuxrc.s390 (maier) Related: rhbz#571370- If only AATTCore is installed, add --nobase to the anaconda-ks.cfg. (clumens) Resolves: rhbz#593548- translations: scdate can translate timezones better then us. (akozumpl) Related: rhbz#598413- Update font list (clumens) Resolves: rhbz#601501
* Fri Jun 11 2010 David Cantrell - 13.21.50-6- Select default and mandatory packages when enabling repos. (dlehman) Related: rhbz#561164
* Thu Jun 10 2010 David Cantrell - 13.21.50-5- Remove duplicate md handling code from 70-anaconda.rules (dcantrell) Resolves: rhbz#599197 Resolves: rhbz#591970- Correct initrd.img load address on s390 (dcantrell) Related: rhbz#546422- Remove python-bugzilla requirement (dcantrell) Resolves: rhbz#602793- Include /sbin/blkid in the initrd.img (dcantrell) Related: rhbz#591970 Related: rhbz#599197
* Mon Jun 07 2010 Chris Lumens - 13.21.50-4- Fix the patch fuzz so the build system doesn\'t complain (clumens). Related: rhbz#600225
* Mon Jun 07 2010 Chris Lumens - 13.21.50-3- Back out part of the previous patch that removed the call to blkid (clumens). Resolves: rhbz#600225
* Wed Jun 02 2010 David Cantrell - 13.21.50-2- Remove duplicate md handling code from 70-anaconda.rules (dcantrell) Resolves: rhbz#599197
* Tue Jun 01 2010 David Cantrell - 13.21.50-1- Replace the Serial Number column with an Identifier column (clumens). Resolves: rhbz#560666- Adjust mdraid size estimates (bcl) Resolves: rhbz#587442- Extra debugging output (bcl) Related: rhbz#587442 Resolves: rhbz#587442- Require newer pykickstart (dcantrell) Related: rhbz#596804- Give blkid the final word on device format detection. (dlehman) Resolves: rhbz#593637- Set NM_CONTROLLED=no iscsi for storage devices only on system (rvykydal) Resolves: rhbz#598070- Allow ignoredisk to be interactive without the rest of the UI (pjones) Resolves: rhbz#596804- booty: Make getPhysicalDevices only return physical devices (hdegoede) Resolves: rhbz#593718- booty: Don\'t create device.map entries for devices backing / (hdegoede) Related: rhbz#593718- Do not allow editing of extended partitions (hdegoede) Resolves: rhbz#593754
* Sun May 30 2010 David Cantrell - 13.21.49-1- Add more sanity checks to the mountpoint (bcl) Resolves: rhbz#592185- Make sure the product.img directory is mounted before copying (clumens). Resolves: rhbz#587696
* Wed May 26 2010 David Cantrell - 13.21.48-1- Fixed the setting of LD_LIBRARY_PATH in rescue (mgracik) Resolves: rhbz#594034- Set repository in kickstart harddrive command (rvykydal) Resolves: rhbz#592239- Give pre-existing mdraid arrays the proper name in the UI (hdegoede) Resolves: rhbz#596227- Add nm-c-e translations to stage 2 (rvykydal) Resolves: rhbz#594982- set the resolution with resolution= from the cmdline (akozumpl). Resolves: rhbz#594918
* Tue May 25 2010 David Cantrell - 13.21.47-1- Skip the bootloader placement window if we\'re on UEFI (pjones) Resolves: rhbz#582143- Support cio_ignore functionality for zFCP devices (dcantrell) Resolves: rhbz#533492- Add missing newline for \'nfs\' line in ks file (dcantrell) Resolves: rhbz#591479- Correct problem with initrd.addrsize generation (dcantrell) Resolves: rhbz#546422- Add fipscheck to the install.img (mgracik) Resolves: rhbz#592186- Don\'t unconditionally unskip the partition step on failure (clumens). Resolves: rhbz#595604- Fix rescue mode startup with kickstart file and without (msivak) Resolves: rhbz#515896- fix: traceback in check_memory() (akozumpl). Resolves: rhbz#595284- Make re-init all inconsistent lvm mean re-init all instead of ignore all (hdegoede) Related: rhbz#591469
* Mon May 24 2010 David Cantrell - 13.21.46-1- Read cciss devices correctly from \'multipath -d\' output (dcantrell) Resolves: rhbz#559507- Do not enable addon repos by default (dcantrell) Resolves: rhbz#561164- On NFS installs, look for product.img and updates.img under images/ (clumens). Resolves: rhbz#594811- Remove yum cache for anaconda\'s temporary repos (clumens). Resolves: rhbz#593649- Change the configuration of depmod and link modules to better place (msivak) Resolves: rhbz#593941- Fix a syntax error in the advanced storage code (clumens). Resolves: rhbz#595290- clearer error messages for missing iscsi initiator name (hdegoede) Related: rhbz#594434- fedora is part of iSCSI initiator name (hdegoede) Resolves: rhbz#594659- Add default iSCSI initiator name in rescue mode (hdegoede) Resolves: rhbz#594434- Make vesa and rescue options available in UEFI (pjones) Resolves: rhbz#576828
* Fri May 21 2010 David Cantrell - 13.21.45-1- Use correct NM dbus interfaces (rvykydal) Resolves: rhbz#594716- Don\'t autostep past the end of the install screens (bcl) Resolves: rhbz#593556
* Thu May 20 2010 David Cantrell - 13.21.44-1- Add missing rpm macros file to get rid of the rpm warnings (msivak) Related: rhbz#593941- Keep track of pvcount for non existing vgs (hdegoede) Resolves: rhbz#593871- Don\'t clear immutable devices (hdegoede) Resolves: rhbz#593642- Store immutable info into the device for easier access (hdegoede) Related: rhbz#593642- Check for sane mountpoint in raid dialog (bcl) Resolves: rhbz#592185- Check for sane mountpoint in lvm dialog (bcl) Resolves: rhbz#592185- Check for sane mountpoint in partition dialog (bcl) Resolves: rhbz#592185- Cleaned up sanityCheckMountPoint (bcl) Related: rhbz#592185- Return disk to prior state following failed partition removal. (dlehman) Resolves: rhbz#592339- Remove partitions after unpartitioned non-partition devices. (dlehman) Resolves: rhbz#592337- Pick up mountpoint for existing formats on encrypted LVs. (dlehman) Resolves: rhbz#587002- Display unpartitioned disks in main partitioning gui. (dlehman) Resolves: rhbz#588637- Don\'t drop encryption when re-editing new encrypted partitions. (dlehman) Resolves: rhbz#592340
* Wed May 19 2010 David Cantrell - 13.21.43-1- Handle vgs with duplicate names (hdegoede) Resolves: rhbz#591469- Delay setting up lvs until other devices are scanned (hdegoede) Related: rhbz#591469- anaconda udev rules should not get lvm info based in volgroup name (hdegoede) Related: rhbz#591469- Move creation of lv devices into its own function (hdegoede) Related: rhbz#591469- FcoeDiskDevice.dracutSetupString(): use the right dracut syntax (hdegoede) Resolves: rhbz#486244
* Tue May 18 2010 David Cantrell - 13.21.42-1- Fix the order of arguments in archive read callback and archive closing. (msivak) Related: rhbz#508242- Use \"kernel-modules = version\" style for locating rpms providing driver updates (msivak) Related: rhbz#508242- Move depmod configuration into new directory structure to get rid of depmod warning (msivak) Resolves: rhbz#508242- Fix descriptor leak and iteration progress in driverdisc code (msivak) Resolves: rhbz#592225- Add the rpmrc file to the initrd.img (mgracik) Resolves: rhbz#508242- Add the eject package to packages list (mgracik) Resolves: rhbz#591070- Add support to livecd for arbitrarily complex dir structures. (dlehman) Related: rhbz#590384- livecd.py: set the selected keyboard. (akozumpl) Related: rhbz#590384- On live installs, the syslog is /var/log/dmesg. (clumens) Related: rhbz#590384- Set up udev environment so anaconda\'s udev rules run in livecd. (dlehman) Related: rhbz#590384- Check for the real device-mapper nodes in /proc/swaps (dlehman). Resolves: rhbz#590384- Make checksum error message user-friendlier (rvykydal) Resolves: rhbz#592324
* Fri May 14 2010 David Cantrell - 13.21.41-1- Only install non-branded anaconda icon on liveinst arches (dcantrell) Related: rhbz#588737
* Fri May 14 2010 David Cantrell - 13.21.40-1- Add the best package for this arch to the optional package selector (clumens). Resolves: rhbz#591653- Add hmac file for sshd (mgracik) Resolves: rhbz#592186- Enable fips mode after fips mode installation (mgracik) Resolves: rhbz#592188- Remove wireless support bit causing traceback (rvykydal) Resolves: rhbz#520146- Determine if an mdmember is biosraid earlier (hdegoede) Resolves: rhbz#586298- cleanup booty x86 flag.serial handling (hdegoede) Resolves: rhbz#590653- Update po/POTFILES.in for nm-connection-editor integration. (dcantrell) Related: rhbz#520146- Fix typo in loader/nfsinstall.c (dcantrell) Related: rhbz#587696- Swap server and opts on the split() call (dcantrell) Resolves: rhbz#591479- Handle devices that don\'t have a /dev/disk/by-path/ symlink (pjones) Resolves: rhbz#563242- Make sure we write out multipath.conf before discovery (pjones) Resolves: rhbz#563242- Handle >2 way /sbin/multipath output better (pjones) Resolves: rhbz#563242- Add non-branded default liveinst icons for anaconda (dcantrell) Resolves: rhbz#588737- Look for updates.img and product.img on NFS installs. (clumens) Related: rhbz#587696- And add a menu to the right hand side so you can see the new column. (clumens) Related: rhbz#560666- Be more resilient to config files missing sections and options (clumens). Resolves: rhbz#590591- Write out ifcfg files only when necessary (rvykydal) Resolves: rhbz#520146- Use separate method for copying network configuration to system (rvykydal). Resolves: rhbz#520146- Network: remove functions that are not used anymore (rvykydal) Resolves: rhbz#520146- Wait for specific activated network devices (rvykydal). Resolves: rhbz#520146- Set network devices configured in ks to be nm-controlled (rvykydal). Resolves: rhbz#520146- Remove no longer needed devices argument from Network.write() (rvykydal) Resolves: rhbz#520146- Actually generate contents of 70-persistent-net.rules (rvykydal) Resolves: rhbz#520146- Disable [Network Configuration] button if there are no net devs (rvykydal) Resolves: rhbz#520146- Add net device description into selection dialog (rvykydal) Resolves: rhbz#520146- Check preselected install network device as nm controlled (rvykydal) Resolves: rhbz#520146- Don\'t ask when configuring net if we have only one network device (rvykydal) Resolves: rhbz#520146- Do not mess value change with line formatting (rvykydal) Resolves: rhbz#520146- Log change of ifcfg files by nm-c-e (rvykydal) Resolves: rhbz#520146- Enable networking in stage 2 using nm-c-e (rvykydal) Resolves: rhbz#520146- Write ifcfg files via NetworkDevice in Network.write() method (rvykydal) Resolves: rhbz#520146- Use ifcfg files via NetworkDevice in Network class (rvykydal) Resolves: rhbz#520146- Use proper attribute instead of NetworkDevice \'DESC\' hack (rvykydal) Resolves: rhbz#520146- Quote values when writing out to ifcfg files (rvykydal) Resolves: rhbz#520146- Network.__str__() little cleanup (rvykydal) Resolves: rhbz#520146- Use IfcfgFile class to back NetworkDevice objects (rvykydal) Resolves: rhbz#520146- Move some consts to module globals for use in other places (rvykydal) Resolves: rhbz#520146- Add class to manupulate ifcfg files (rvykydal) Resolves: rhbz#520146- Add nslookup to the install.img (mgracik) Resolves: rhbz#591064- Redirect uncpio errors to syslog (bcl) Resolves: rhbz#588671- Reset the resolver cache after bringing up the network (clumens). Resolves: rhbz#587032- Set runlevel 5 based on the presence of both a display manager and X server. (notting) Resolves: rhbz#591610- Add \"Serial Number\" column to the right side of the cleardisks UI. (clumens) Related: rhbz#560666
* Wed May 12 2010 David Cantrell - 13.21.39-1- Set permissions on initrd.addrsize to 0644 (dcantrell) Resolves: rhbz#591455- Add the chk files for libraries to the install.img (mgracik) Resolves: rhbz#590701- Add the eject command to the install.img (mgracik) Resolves: rhbz#591070- Remove raid clone option and code (hdegoede) Resolves: rhbz#589957- Correctly parse system-release (lkundrak) Resolves: rhbz#590407
* Tue May 11 2010 David Cantrell - 13.21.38-1- Add hmac file for libgcrypt to install.img (mgracik) Resolves: rhbz#590701- Make sure a given path exists before calling os.statvfs on it. (clumens) Related: rhbz#591030- Require a format to have a mountpoint before testing for RO (clumens). Resolves: rhbz#591030- Fix verification of DDs, we were looking for wrong path (msivak) Resolves: rhbz#508242- isys/auditd was missing from .gitingore. (akozumpl) Related: rhbz#549653- Offer to ignore unformatted DASDs rather than forcing exit (dcantrell) Resolves: rhbz#580456 Related: rhbz#582638- Fix usage of deviceNameToDiskByPath in devicetree.py (dcantrell) Resolves: rhbz#589967- Use iBFT if present and user didn\'t asked for anything else. (msivak) Resolves: rhbz#581428- storage: LUKSDevice takes req_grow after its slave (akozumpl). Resolves: rhbz#589450
* Fri May 07 2010 David Cantrell - 13.21.37-1- Make Format and Resize checkboxes mutually exclusive (dcantrell) Resolves: rhbz#589977- Advance line pointer & don\'t strdup(val) on error in readNetInfo (dcantrell) Related: rhbz#522064- Correct a typo in processModuleLines (dcantrell) Related: rhbz#586905- Use module reloading in driver disc operations (msivak) Resolves: rhbz#586905- Remove the check for partitions (msivak) Resolves: rhbz#508242- Close the dir descriptor after usage. (msivak) Resolves: rhbz#589574
* Thu May 06 2010 David Cantrell - 13.21.36-1- Just use /dev/dasdX if we can\'t get a by-path link (dcantrell) Related: rhbz#589713- Do not prepend /dev/disk/by-path in format DASD window (dcantrell) Related: rhbz#589717 Related: rhbz#589713- Use udev_device_get_by_path() to get /dev/disk/by-path link (dcantrell) Resolves: rhbz#589717 Resolves: rhbz#589713- Add udev_device_get_by_path() to return /dev/disk/by-path link (dcantrell) Related: rhbz#589717 Related: rhbz#589713- Expand the details pane when showing unformatted DASDs (dcantrell) Resolves: rhbz#580463- Log problem line if unquoting failed in readNetInfo() (dcantrell) Related: rhbz#522064- Update generic.ins for s390x (dcantrell) Resolves: rhbz#546422- Rename geninitrdsz.c to addrsize.c (dcantrell) Resolves: rhbz#546422- Generate initrd.addrsize file correctly for LPAR booting (dcantrell) Resolves: rhbz#546422- Only allow upgrading from one minor release of RHEL to another (clumens). Resolves: rhbz#589052- fcoe: use fipvlan instead of fcoemon to bring up fcoe (hdegoede) Resolves: rhbz#486244- memory: increase the RAM limits, check for URL installs (akozumpl). Resolves: rhbz#549653- memory: build auditd as a standalone binary and run it so. (akozumpl) Related: rhbz#549653- gui: don\'t let metacity display the title right-click menu (akozumpl). Resolves: rhbz#588642- Align extended partitions like we do other partitions. (dlehman) Resolves: rhbz#560908- Link /sbin/reboot and /sbin/halt to /sbin/init on s390x (dcantrell) Resolves: rhbz#571370- Allow displaying groups that only contain conditional packages (clumens). Resolves: rhbz#588735- Don\'t remove
*.hmac files when creating install images (mgracik) Resolves: rhbz#568295
* Tue May 04 2010 David Cantrell - 13.21.35-1- Make deviceNameToDiskByPath check udev info instead of sysfs (dcantrell) Related: rhbz#560702- Fix some minor problems in storage/dasd.py (dcantrell) Resolves: rhbz#560702- Read in network settings correctly, as configured by linuxrc.s390 (dcantrell) Related: rhbz#522064- Clean up wording for oversized LVs (dcantrell) Resolves: rhbz#587459- Tell dracut it should activate the first swap device (hdegoede) Resolves: rhbz#588351- Don\'t add recovery partitions to the grub boot menu (hdegoede) Resolves: rhbz#588664- Add nfs options to kickstart if we use nfsiso (mgracik) Resolves: rhbz#585136
* Mon May 03 2010 David Cantrell - 13.21.34-1- Use g_str_has_suffix() to check end of string (dcantrell) Related: rhbz#522064- Add repos for all addons in all enabled repositories (clumens). Resolves: rhbz#580697- Remove an unnecessary network test and bringup in doConfigSetup. (clumens) Related: rhbz#580697- Add a method that fetches and returns the .treeinfo file. (clumens) Related: rhbz#580697- Find stage2 install.img on local hd installs (dcantrell) Related: rhbz#522064- Copy install.img to install target on http installs. (pjones) Resolves: rhbz#549653- Make sure the install.img exists before attempting to copy (clumens). Resolves: rhbz#549653- Copy install.img and remount no matter how many discs (pjones) Resolves: rhbz#549653- Prevent root-on-xfs (akozumpl). Resolves: rhbz#498002- gui: gray out OK button while adding raid set (akozumpl). Resolves: rhbz#587161- Strip quoting from OPTIONS when composing rd_CCW line (dcantrell). Resolves: rhbz#577193- Add all possible install class locations to the search path (clumens). Resolves: rhbz#587696- Print out device sizes in list-harddrives-stub as well (clumens). Resolves: rhbz#587395- Wait for scsi adapters to be done with scanning their busses (hdegoede) Resolves: rhbz#583143- Add new return code check for isomd5sum\'s mediaCheckFile (rvykydal). Resolves: rhbz#586359- fix: mnemonics don\'t work in the welcome screen until user clicks (akozumpl). Resolves: rhbz#587157- Set CURL_FAILONERROR to catch url download errors (dcantrell) Resolves: rhbz#586925- Bring up network for local hd vnc kickstart installs (dcantrell) Resolves: rhbz#522064- gui: no close buttons etc. in window decoration (akozumpl) Resolves: rhbz#582645- Added clear command to the install.img (mgracik) Resolves: rhbz#586499- Added chvt to the install.img (mgracik) Resolves: rhbz#575844- Don\'t clear BIOS RAID member disks (hdegoede) Resolves: rhbz#586985- Remove devices from libparted\'s cache when destroying them (hdegoede) Resolves: rhbz#568346
* Wed Apr 28 2010 David Cantrell - 13.21.33-1- Offer to format unformatted DASD devices (dcantrell) Resolves: rhbz#560702- Make sure we use 1.0 mdraid metadata when the set is used for boot (hdegoede) Resolves: rhbz#585106- Add a preCommitFixup hook to StorageDevice classes (hdegoede) Related: rhbz#585106- Check for not having found any disks after populating the tree (hdegoede) Resolves: rhbz#585105- init: switch back to tty1 after the installer finishes. (akozumpl) Resolves: rhbz#576851- Don\'t traceback on CD-ROM driver in list-harddrives-stub (clumens). Resolves: rhbz#586410- Fetch ks files over NFS when ksdevice is not given (dcantrell) Resolves: rhbz#541873
* Mon Apr 26 2010 David Cantrell - 13.21.32-1- Revert \"Set minswap suggestion on s390x to 1 (dcantrell).\" Resolves: rhbz#466289- Properly align the first partition we create (hdegoede) Resolves: rhbz#586144- Remove the README files (clumens). Resolves: rhbz#584595- Make it more clear what the purpose of the \"Boot\" column is (clumens). Resolves: rhbz#586177
* Thu Apr 22 2010 David Cantrell - 13.21.31-1- Prune resize and format create/migrate actions if destroying a device. (dlehman) Resolves: rhbz#575070 Resolves: rhbz#585026- Schedule actions when removing existing extended partitions. (dlehman) Resolves: rhbz#585028- Don\'t try to zero out extended partitions. (dlehman) Resolves: rhbz#585025- lvm: check resizing against format\'s targetSize (akozumpl). Resolves: rhbz#580171- Restore storage.clearPartType after reset when backing out of GUI. (dlehman) Resolves: rhbz#559233- Make Cancel button the default for \'Weak Password\' dialog (bcl) Resolves: rhbz#582660- Set Create Storage focus to first active radio button (bcl) Resolves: rhbz#582676
* Mon Apr 19 2010 David Cantrell - 13.21.30-1- Don\'t make all devices on the boot device selector immutable (clumens). Resolves: rhbz#583028- Careful with that WINDOW_TYPE_HINT_DESKTOP, Eugene. (akozumpl) Resolves: rhbz#582998- Prevent low-level formatting of DASDs in rescue mode (hdegoede) Resolves: rhbz#582638- Move the question about formatting DASD\'s to the interface class (hdegoede) Related: rhbz#582638- Let the user know if adding a zfcp drive fails (hdegoede) Resolves: rhbz#582632- Check for presence of filesystem module in FS.mountable (dcantrell) Resolves: rhbz#580520- Check for fs utils when determining if an fs can be resized (dcantrell) Resolves: rhbz#572431
* Fri Apr 16 2010 David Cantrell - 13.21.29-1- Fix hiding the advanced button on the filter UI (clumens). Resolves: rhbz#565425 Resolves: rhbz#555769- Select \"Advanced Storage Devices\" by default on s390 (clumens). Resolves: rhbz#580433- Don\'t sigsegv on stage2= derived from invalid repo= parameter (rvykydal). Resolves: rhbz#574746- Removed the tooltips showing glade.gnome.org link (mgracik) Resolves: rhbz#566773
* Thu Apr 15 2010 David Cantrell - 13.21.28-1- PkgWrangler fixes (dcantrell) Related: rhbz#543948- Do not append \"rhgb quiet\" to s390 boot loader config (dcantrell) Related: rhbz#526364 Resolves: rhbz#570743- Try to get boot reqs onto the selected boot device. (dlehman) Resolves: rhbz#560387- Ensure proper disklabel type on boot disk if CLEARPART_TYPE_ALL. (dlehman) Resolves: rhbz#570483- Add proper support for destruction of disklabels. (dlehman) Related: rhbz#570483- Three small fixes to action sorting. (dlehman) Related: rhbz#570483- add_drive_text: Pass interface to iscsi.addTarget (hdegoede) Related: rhbz#571808- Add a questionInitializeDisk method to the rescue interface (hdegoede) Resolves: rhbz#582304- Fix syntax error in kickstart.py (hdegoede) Related: rhbz#578937- Add advanced storage support to rescue mode (hdegoede) Resolves: rhbz#571808- rescue.py: Put our mount / rw, ro, skip question in a loop (hdegoede) Related: rhbz#571808- Move addDriveDialog() and friends to their own class (hdegoede) Related: rhbz#571808- partition_text: Make addDriveDialog() not depend on anaconda.storage (hdegoede) Related: rhbz#571808
* Wed Apr 14 2010 David Cantrell - 13.21.27-1- Simplify HWADDR removal check on s390x (dcantrell) Resolves: rhbz#546005- Set minswap suggestion on s390x to 1 (dcantrell). Resolves: rhbz#466289- Check for and offer to format unformatted DASD devices (dcantrell). Resolves: rhbz#560702- Add /sbin/reboot and /sbin/halt to s390 initrd.img (dcantrell) Resolves: rhbz#571370- Do not append \"rhgb quiet\" to s390 boot loader config (dcantrell) Resolves: rhbz#570743- filter_gui.py: fixup isProtected changes for biosraid and mpath (clumens) Resolves: rhbz#582418- Show protected devices in the filter UI, but make them immutable (clumens). Resolves: rhbz#582380- Turn protected devices into a property on the Anaconda object (clumens) Related: rhbz#582380- Don\'t make UEFI boot media for i386 (pjones) Resolves: rhbz#576580
* Tue Apr 13 2010 David Cantrell - 13.21.26-1- Write an AUTO ... line to mdadm.conf (hdegoede) Resolves: rhbz#581984- Add udev_settle after setup of LUKSDevice. (dlehman) Resolves: rhbz#534043- Fix creation of encrypted md members and pvs in kickstart. (dlehman) Resolves: rhbz#578890- Preserve encryption setting when re-editing new encrypted LVs. (dlehman) Resolves: rhbz#579930- Enforce maximum partition sizes. (dlehman) Resolves: rhbz#580302- Remove rules handled by the device-mapper package\'s rules. (dlehman) Resolves: rhbz#580304- Fix ordering of arguments to xfs_admin for writing fs label. (dlehman) Resolves: rhbz#580305- Show the correct device path when formatting as swap or luks. (dlehman) Resolves: rhbz#580488- Inherit the ZFCP command from the correct pykickstart class (clumens). Resolves: rhbz#581829
* Mon Apr 12 2010 David Cantrell - 13.21.25-1- Fix traceback in booty when ppc /boot lives on mdraid (hdegoede) Resolves: rhbz#531722- Add some better printing to init for future debugging. (clumens) Related: rhbz#579044- Get rid of iutil.exec
*()\'s searchPath argument, it is harmful. (pjones) Resolves: rhbz#579654- Unify two wait
*() paths, so we only have two, not three... (pjones) Resolves: rhbz#579044- Default to /images/install.img if no dir is given in stage2=hd: (rvykydal) Resolves: rhbz#549398- Don\'t segfault if proxyUser or proxyPassword are empty (clumens). Resolves: rhbz#580683- Allow using pre-existing gpt labels for /boot on non EFI x86 (hdegoede) Resolves: rhbz#580404- storage/udev.py handle iscsi ID_PATH IPV6 address containing : (hdegoede) Resolves: rhbz#579761- Catch errors when downloading the escrow cert (clumens). Resolves: rhbz#579992- fix: Tackle race condition issues during X startup (akozumpl). Resolves: rhbz#579654
* Tue Apr 06 2010 David Cantrell - 13.21.24-1- Update installclasses/rhel.py for latest comps changes (dcantrell) Resolves: rhbz#579903- Sort partition create actions before other unpartitioned devices. (dlehman) Resolves: rhbz#574379- Fix up device dialogs\' handling of preexisting formatting. (dlehman) Related: rhbz#572331- Set up devices using their original formats for certain action types. (dlehman) Resolves: rhbz#572331- Keep a handle to devices\' original format instance. (dlehman) Related: rhbz#572331- Automatically select devices added via the \"Add Advanced\" button (clumens) Resolves: rhbz#579051- Schedule removal actions for any format on a --onpart= device (clumens) Resolves: rhbz#578937- Take the request\'s format into account when deciding to resize (clumens) Resolves: rhbz#578471- DiskLabel.status can\'t be determined so return False. (dlehman) Resolves: rhbz#563526- Ignore probably-spurious disklabels on unpartitionable devices. (dlehman) Resolves: rhbz#570474- Remove newly added partition from disk if subsequent commit fails. (dlehman) Resolves: rhbz#559907
* Wed Mar 31 2010 David Cantrell - 13.21.23-1- network.dracutSetupString(): handle hosts outside the subnet (#577193) (hdegoede) Resolves: rhbz#577193- Write rd_CCW when root fs is on a network device on s390x (#577193) (dcantrell) Resolves: rhbz#577193- Keep /usr/bin/seq for the initrd.img (#558881). (dcantrell) Related: rhbz#558881- Fix syntax for passing a mapping to a translatable string (#578489). (clumens) Resolves: rhbz#578489- Keep the selected device count right when going back to filtering (#578451). (clumens) Resolves: rhbz#578451- Enable network if it is needed when repo is added in UI (#577899) (rvykydal) Resolves: rhbz#577899- Do not try to commit diskLabels on non partitionable devices (#576145) (hdegoede) Resolves: rhbz#576145- Fix typo in linuxrc.s390. ctm should be ctcm (#561816) (dcantrell) Related: rhbz#561816- Remove dasdSetup() from loader (#558881) (dcantrell) Resolves: rhbz#558881- Include /sbin/
*_cio_free commands in s390x initrd.img (#558881). (dcantrell) Resolves: rhbz#558881- Wait for SIGCHILD signals (#540923) (msivak) Resolves: rhbz#540923- fcoe: sysfs_edd.sh has been renamed to fcoe_edd.sh (hdegoede) Related: rhbz#513018- Use /sbin/dasd_cio_free to free blacklisted DASDs (#558881) (dcantrell) Resolves: rhbz#558881- Increase ping timeout for gateway/dns server reachability check (#536815) (dcantrell) Resolves: rhbz#536815- Fix off-by-one error in string initialization (#563210) (msivak) Resolves: rhbz#563210- exception.py: switch to tty1 before exit (#576851) (akozumpl) Resolves: rhbz#576851
* Fri Mar 26 2010 David Cantrell - 13.21.22-1- Try to pull in generic libraries as well as optimized ones (#572178) (pjones)- Translate the Back button in glade (#576894) (akozumpl)- Make the kernel \'sshd\' parameter work as expected (#572493) (akozumpl)- Redo the \'sshd\' flag. (#572493) (ajax)- yum requires the proxy settings to include a protocol (#484788, #567982). (clumens)- Only look for extended partitions on partitioned devices (#577383) (hdegoede)- Include the report module and related support files (#562656). (clumens)- report handles exn saving now, and doesn\'t require a Filer (#562656). (clumens)- Adapt to using report\'s UI API (#562656). (clumens)- Fix referring to disks by-label, by-uuid, etc (#577385). (clumens)- Add support for recognizing BIOS EDD configured FCoE drives (#513018) (hdegoede)- Update format of cdrom devices when looking for repos on media (#576542) (rvykydal)
* Tue Mar 23 2010 David Cantrell - 13.21.21-1- Update filter for translation log entries. (dlehman)- Reset comps/groups info after editing repo in UI (#574761) (rvykydal)- Set cache base directory for repos added/edited in UI (#574757). (rvykydal)- Reset conditionals of transaction info too. (#574777) (rvykydal)- Update po/POTFILES.in and anaconda.pot file. (dcantrell)- Fix: \"Hookup new python EDD code\" mismerge (hdegoede)- Make python start with correct default unicode encoding (#576237). (akozumpl)- Add boot= argument to kernel cmdline when in fips mode (#573178) (hdegoede)- Catch NotImplementedError when scanning for disklabels (#566722) (hdegoede)- BIOS RAID sets get shown double when adding advanced storage (#574715) (hdegoede)- Filter UI do not start / stop BIOS RAID sets to get there size (#574682) (hdegoede)- Make filter UI honor nodmraid cmdline option (#574683) (hdegoede)- Revert \"Fix cio_ignore handling for zFCP devices (#533492).\" (dcantrell)- Fix cio_ignore handling for zFCP devices (#533492). (dcantrell)- Fix focus, repaint, and stack issues for nm-c-e (#520146) (rvykydal)- Connect nm-connection-editor to network config button (#520146). (rvykydal)- Add \"Configure Network\" button to network UI screen (#520146). (rvykydal)- Add nm-connection-editor to stage2 (#520146). (rvykydal)- Keep default metacity schema generated for gconf. (#520146) (rvykydal)- platform.checkBootRequest(): Fix use of map instead of filter (#574940) (hdegoede)- If no devices were found do not SIGSEGV (#576240) (msivak)- Use new API in libblkid to look for driverdiscs on removable devices (#508242) (msivak)- metacity, fix a displaying problem with WaitWindow and ProgressWindow (#520146) (akozumpl)- Nuke addFrame()\'s showtitle parameter (#520146). (akozumpl)- Remove gui code we no longer need when mini-wm is gone (#520146) (akozumpl)- Remove mini-wm.c. (#520146) (akozumpl)- Introduces metacity window manager (#520146) (akozumpl)- Update Assamese translation (#552197). (clumens)- Prompt user for install method when going back to STEP_METHOD (#574510) (dcantrell)- Add hmac checksums to the initrd image (#568295) (mgracik)- parted.PartedDisk can throw IOExceptions too (#574481) (hdegoede)- cleardisk_gui: Fix going back to the cleardisks gui (#574454) (hdegoede)- Add \"crashkernel=auto\" to grub.conf for RHEL installs (#561729) (hdegoede)- FcoeDiskDevice.dracutSetupString: handle DCB on / off option (hdegoede)- dcbd is being replaced with lldpad (#563790) (hdegoede)- RescueInterface should inherit from InstallInterfaceBase too (hdegoede)- Warn when ignoring BIOS RAID members (#560932) (hdegoede)- Don\'t traceback when a user tries to put /boot on an LV (#567515) (hdegoede)- Fix backtrace when trying to use LV for /boot (#567515) (hdegoede)- Fix backtrace when adding mdraid arrays (#560360) (hdegoede)- Remove no longer used isys EDD code (hdegoede)- Hookup new python EDD code (#478996) (hdegoede)- Add pure python EDD code parsing and compareDrives substitute (#478996) (hdegoede)- Wait for all DASDs to be online after autodetection (#558881). (dcantrell)- Use lsznet.raw from s390utils package (#563548). (dcantrell)- Use /sys/devices/{lcs,ctcm} instead of /sys/devices/cu3088 (#561816). (dcantrell)- Derive stage2= from repo=nfsiso: correctly (#565885) (rvykydal)- Include USB ATA bridge modules in initrd (#531532) (rvykydal)- Select/Deselect All should only apply to the current tab (#516143). (clumens)- Add device node names to the filter UI, hidden by default (#566375). (clumens)- Display ID_PATH for zFCP devices instead of looking for a WWID. (clumens)- Fix a couple filtering UI problems caused by switching models around (#574469). (clumens)- Fix visibility counting on filter notebook pages. (clumens)- Fix thinko in displaying the first filter notebook page that disks. (pjones)- gtk.TreeStores are iterable, so use indices instead of iterators. (clumens)- Build sorted models on top of filtered models to make column sorting work. (clumens)- Change what columns are shown by default on the basic filtering tab (#560666). (clumens)- Add ID_SERIAL in as a backup in case there\'s no ID_SERIAL_SHORT (#574467). (clumens)- Put ZFCP devices on the \"Other\" tab of the filtering UI. (clumens)- Display ID_PATH instead of WWID for DASDs as well. (clumens)- Rename the WWID column to Identifier. (clumens)- cosmetic: tell them we expect NFSv3 path in loader (#560101). (akozumpl)- Allow --ignoremissing to work for )- Add a Requires: for tigervnc-server (#561498). (clumens)- doReIPL should return when going back through steps, too (#563862). (clumens)- By default, libcurl does not appear to follow redirects (#572528). (clumens)- Before running shouldClear, make sure a real disk was specified (#572523). (clumens)
* Thu Mar 11 2010 David Cantrell - 13.21.20-1- Tell ld.so and friends not to use hardware optimized libs (#572178) (pjones)
* Wed Mar 10 2010 David Cantrell - 13.21.19-1- Ensure ppc64 is not a font arch. (#569505). (dcantrell)- Startup iscsi / fcoe / zfcp before listing drives in the filter UI (hdegoede)- Fix traceback when trying to configure zfcp disks (#572108) (hdegoede)
* Mon Mar 08 2010 David Cantrell - 13.21.18-1- Do not call \'ppc64\' a \'ppc\' to match rpmUtils.arch.getBaseArch() (#569505) (dcantrell)
* Thu Mar 04 2010 David Cantrell - 13.21.17-1- Group definition updates (#568348). (dcantrell)- Correct problem with screenfont and keymap on ppc[64] systems (#569505). (dcantrell)- Improve reboot modes in init.c and shutdown.c. (#564297). (akozumpl)- Fix recognition of partitions on mdraid arrays (#569462) (hdegoede)- Use new package structure of firstaidkit (#510346) (msivak)
* Thu Feb 25 2010 David Cantrell - 13.21.16-1- Add [images-xen] block to .treeinfo (#559347). (dcantrell)- Revert \"There is no kernel-PAE package anymore, use kernel for xen (#559347).\" (dcantrell)
* Tue Feb 23 2010 David Cantrell - 13.21.15-1- When BUILDARCH==ppc64, set BASEARCH to ppc (#524235). (dcantrell)- There is no kernel-PAE package anymore, use kernel for xen (#559347). (dcantrell)- Don\'t show BIOS RAID and multipath members in the cleardisks UI (#567281). (clumens)- Don\'t reset the default package selection on text installs (#559593). (clumens)
* Thu Feb 18 2010 David Cantrell - 13.21.14-1- Don\'t traceback during kickstart if no ignoredisk line is given (#563581). (dcantrell)- cleardisk_gui: Base autoselection of bootdev on detected BIOS order (hdegoede)- Pass \'--force\' to vgremove to avoid interactive prompts. (#563873) (dlehman)- Fixed parsing of strings with multiple values in pyudev (mgracik)- Fixed the problem with string to list properties (#560262) (mgracik)
* Wed Feb 17 2010 Chris Lumens - 13.21.13-1- Add missing methods to RescueInterface (#566298). (pjones)
* Tue Feb 16 2010 David Cantrell - 13.21.12-1- Use the LUKS UUID, not the filesystem UUID for dracut. (#561373) (dlehman)- Only check that extended\'s start sector is within the chunk. (#560908) (dlehman)- Add currentSize method to the PartitionDevice class (#565822) (hdegoede)- Set initrd load address to 32MB for s390x (#546422). (dcantrell)- Intel BIOS RAID array not recognized (#565458) (hdegoede)- Fix traceback in filter_gui.py when dealing with RAID10 BIOSRAID (#565444) (hdegoede)- \"_Do_ override BASEARCH with BUILDARCH, it does make sense (#524235)\" (msivak)
* Thu Feb 11 2010 David Cantrell - 13.21.11-1- Revert \"Write ARP=no to ifcfg file when VSWITCH=1 is set on s390x (#561926).\" (dcantrell)- Update task list for RHEL6 beta 1 (#561164, notting). (clumens)- Keep the end sector aligned when resizing partitions (#560647) (hdegoede)- Do not override BASEARCH with BUILDARCH, it doesn\'t make sense (#524235) (msivak)- Prevent init from telling us its story if the shutdown was planned. (#562166) (akozumpl)- Remove check for MD_DEVNAME from udev_device_is_md. (#562024) (dlehman)- Don\'t try to specify bitmap for RAID0 since mdadm doesn\'t allow it. (#562023) (dlehman)
* Fri Feb 05 2010 David Cantrell - 13.21.10-1- Write ARP=no to ifcfg file when VSWITCH=1 is set on s390x (#561926). (dcantrell)
* Wed Feb 03 2010 Chris Lumens - 13.21.9-1- Fix typo in action sorting. Disklabels before partitions. (#561306)) (dlehman)- Fix: execWithRedirect() logging stderr at wrong loglevel. (akozumpl)- Fix: execWithCallback() not logging stderr. (akozumpl)- Fix keymaps-override-ppc pickup in mk-images (#524235) (msivak)- Fix: ArithmeticError: Could not align to closest sector (#561278) (hdegoede)- On text kickstart installs, doBasePackageSelect still needs to run (#559593). (clumens)- Skip the filtering UI if there\'s only one disk in the machine (#560671). (clumens)- Allow getScreen methods to indicate the screen should be skipped. (clumens)
* Mon Feb 01 2010 Chris Lumens - 13.21.8-1- Fixup partition aligning (#560586) (hdegoede)- pyudev: explicitly specify all return value and argument types (#559394) (hdegoede)
* Fri Jan 29 2010 Chris Lumens - 13.21.7-1- Correctly add found multipath devices to our dict (#560029). (clumens)- Remove /sys prefix in udev_enumerate_devices() (#560037) (hdegoede)
* Thu Jan 28 2010 David Cantrell - 13.21.6-1- Use libudev\'s enumerate_devices function (#559394) (mgracik)- Update =~ regexps in lsznet.raw for bash-4.1 (#558537). (dcantrell)- Include /etc/netconfig in the initrd for NFS (#557704). (clumens)- multipath gives us CCISS devices names with ! in them, but we expect /. (clumens)
* Wed Jan 27 2010 Chris Lumens - 13.21.5-1- Make sure we get required nss-softokn libs in the images. (dcantrell)- Make sure we always check /lib64 and /lib in find_library (#555669). (dcantrell)- Add 5 second ping delay for gateway and dns test on s390x (#536815). (dcantrell)- Update =~ regexps in linuxrc.s390 for bash-4.1 (#558537). (dcantrell)- Do not reference Fedora bugs in rhel6-branch commits. (dcantrell)
* Mon Jan 25 2010 Chris Lumens - 13.21.4-1- DMRaidArrayDevice don\'t pass major/minor to DMDevice.__init__ (#558440) (hdegoede)- Filter UI: don\'t show cciss controllers without sets (hdegoede)- Filter UI: give BIOS RAID sets a usable model string and display that (hdegoede)- Make MDRaidArray description the same as DMRaidArray (hdegoede)- Add DMRaidArrayDevice description and model properties (#558440) (hdegoede)- DMRaidArrayDevices exist when created (#558440) (hdegoede)- Use description property for MDRaidArrayDevice model (hdegoede)- MDRaidArrayDevice: Get rid of the ugly self.devices[0].type checking (hdegoede)- Make storage.unusedMDFoo also check mdcontainer members (hdegoede)- Remove MDRaidArrayDevice biosraid property (hdegoede)- Give MD BIOS RAID arrays there own type (hdegoede)- Check for devices with no media present in filter_gui.py (#558689) (hdegoede)- multipath requires libaio.so (pjones)- Fix a syntax error in storage/devicetree.py (#558534). (clumens)
* Fri Jan 22 2010 Chris Lumens - 13.21.3-1- Fix a syntax error in filter_gui.py (hdegoede)- Fix broken log message. (pjones)- Make multipath support use device-mapper-multipath to setup mpaths. (pjones)- Make PartitionDevice have its own teardown() when used with mpath. (pjones)- Create multipath.conf (pjones)- Make sure MultipathDevice is setup correctly. (pjones)- Remove the multipath name generator, it is no longer used. (pjones)- Set StorageDevice.exists before calling Device.__init__ (pjones)- Add another command to .bash_history. (pjones)- Add mpath device to selection instead of its constituents. (pjones)- Make all StorageDevice-s support .vendor and .model (pjones)- Add a parser for \'multipath -d\' output. (pjones)- Multipath members should not be added to the ignored disk list. (pjones)- Add udev accessor for ID_MODEL_FROM_DATABASE/ID_MODEL. (pjones)- Add udev_device_get_multipath_name(). (pjones)- Use mpath names instead of serials to group them. (pjones)- Add an exception to use when multipath fails. (pjones)- Add missing log_method_call()s. (pjones)- Use StorageError insead of enumerating all the different storage errors. (pjones)- Make clearDisksWindow use device.model not device.partedDevice.model (pjones)- Show call depth with spaces in log_method_call() (pjones)- nss files moved around again, NM needs more (#557702) (dcantrell)- Only /boot needs to be on one of the bootFSTypes. (#557718) (dlehman)- MDRaidMember.__str__ add biosraid attribute to the returned string (hdegoede)- Remove setting of _isDisk and _partitionable from iscsi and fcoe disk code (hdegoede)- Add isDisk property to MDRaidArrayDevice (hdegoede)- Make isDisk a property (hdegoede)- Remove DMRaidDevice.mediaPresent method (hdegoede)- Honor clearPartDisks when clearing whole disk formatting formatted disks (hdegoede)- Fixup MDRaidArrayDevice.biosraid (hdegoede)- Update exclusiveDisks when handling mdraid BIOSRAID in isIgnored (hdegoede)- MDRaidDevice does not have serial, vendor or bus arguments (hdegoede)- Don\'t traceback on devices without a serial (hdegoede)- Make addUdevPartitionDevice add lvm filters for ignored partitions (hdegoede)- Remove BIOSRAID see if ignored again code from addUdevPartitionDevice (hdegoede)- Remove special partition handling from isIgnored (hdegoede)- Fix MDRaidArrayDevice mediaPresent to not depend on paritioned state (hdegoede)- Special handling for mdraid BIOS RAID sets in exclusive disks (hdegoede)- 2 small mdraid related storage/udev.py changes (hdegoede)- Fix an infinite loop by properly iterating over the disks store (#557856). (clumens)- Add a description attribute to MDRaidArrayDevice (hdegoede)- Don\'t do exclusiveDisks checking for BIOS RAID members (hdegoede)- List biosraids w/ disks and don\'t include them w/ md arrays in partgui. (dlehman)- Add biosraid property and use it in MDRaidArrayDevice.partitionable. (dlehman)- Make partitionable a property of StorageDevice instead of a plain attr. (dlehman)- make dracut only activate the root LV (#553295) (hdegoede)
* Wed Jan 20 2010 Chris Lumens - 13.21.2-1- Fix compile problem from 65a3c05. (akozumpl)- Fix SIGSEGV in dlabel feature (#556390) (msivak)- Remove unnecessary free from the rpmextract error handler (msivak)- Support ignore all/reinit all on the disk reinitialization question (#512011). (clumens)- Handle reboot better on s390 (#533198) (dcantrell)- Reset network setting input counters for IPv4 and IPv6 (#553761). (dcantrell)- Fix reading dasd status sysfs attribute (#536803). (dcantrell)- s390 CHPID types must be treated in hex for lookup table to work (#552844) (maier)
* Fri Jan 15 2010 Chris Lumens - 13.21.1-1- Include device-mapper-multipath in stage2.img (pjones)- Load all scsi_dh_
* modules, since they can\'t be modprobe by aliases... (pjones)- Display the first filter notebook page that has any disks on it. (clumens)- The firmware and additional-web-server groups no longer exist (#555609). (clumens)- Fix a traceback adding RAID devices to the filtering UI. (clumens)- reIPL code cleanup in loader (dcantrell)- Don\'t log the big parted.Partition string every time we do a flag op. (dlehman)- Check for disklabels on unpartitionable devices. (#539482) (dlehman)- Make partitioned attr depend on whether the device is partitionable. (dlehman)- Make sure to clear partitions before destroying a disklabel. (dlehman)- Raise an exception when /etc/fstab contradicts detected fs type (#536906) (dlehman)- Don\'t include read-only filesystems in fsFreeSpace. (#540525) (dlehman)- NTFS filesystems are not really modifiable in any real sense. Admit it. (dlehman)- Look for the SSH config file in /etc/ssh on s390 as well (#555691). (clumens)- Changed the architecture check from __ppc64__ to __powerpc64__ (#555669) (mgracik)- Fix the blkid infinite loop. (#555601) (msivak)- Testing mode was removed. (rvykydal)- Support the new excludedGroupList in pykickstart (#554717). (clumens)- Write \"#version=RHEL6\" to anaconda-ks.cfg (#552230). (clumens)- Use passed in anaconda parameter instead of relying on handler (hdegoede)- kickstart.py: Fix stdoutLog not being defined (hdegoede)- pylint error fixes round 2 (hdegoede)- Fixup various errors detected by pylint (hdegoede)- mdraid: various changes to options for new mdraid array creation (hdegoede)- Emit a dracut setup string for the root device itself (hdegoede)- Fix path mistakes in dasd_settle() in loader/linuxrc.s390 (dcantrell)- Do not write HWADDR to ifcfg file on s390x for OSA Layer 2 (#546005) (dcantrell)- Poll DASD status for \'online\' or \'unformatted\' (#536803) (dcantrell)- Add back hald for Xorg input device queries (#553780) (dcantrell)- Support moving multiple rows at once in the cleardisks UI. (clumens)- Allow disks in the filter and cleardisks UIs to be selected via double-click. (clumens)
* Wed Jan 13 2010 Chris Lumens - 13.21.0-1- Don\'t log the size of what we\'re unpacking anymore. (clumens)- Update the pyparted and python-pyblock requirements to the latest. (clumens)- Fix a date ordering problem in the .spec.in changelog. (clumens)- Add \"askmethod\" as a default argument (#545730). (clumens)- Set yum debuglevel by default (dgregor).- All the nss libraries still appear to be under $LIBDIR (dgregor).- RHEL6 wants \"ppc64\" instead of \"ppc\" coming from iutil.getArch (dgregor).- Some packages are i386, some i586, and some i686 so support all (dgregor).- Add a patch for debugging buildinstall (dgregor).- Enable the .z part of the anaconda version number. (dcantrell)- Bring in 12.y.z changelog entries for rhel6-branch. (dcantrell)
* Tue Jan 12 2010 Chris Lumens - 13.21-1- Fix implicit declaration of things in sys/stat.h. (clumens)
* Tue Jan 12 2010 Chris Lumens - 13.20-1- devicetree.devices is a list, not a dict (#554455). (clumens)- Try to copy the correct traceback file, not anacdump.txt. (clumens)- Make sure /tmp/DD exists before trying to copy it. (clumens)
* Fri Jan 08 2010 David Cantrell - 13.19-1- st_size is off64_t on i386, off_t on others. (dcantrell)
* Fri Jan 08 2010 David Cantrell - 13.18-1- RPM version check correction. (dcantrell)
* Fri Jan 08 2010 David Cantrell - 13.17-1- fstat->st_size is a long unsigned int, not a long long unsigned int. (dcantrell)- Use libarchive and rpm pkg-config files during build. (dcantrell)- Take ignoredDisks into account on the filter screen as well. (clumens)- Don\'t wait on the filtertype screen on kickstart installs. (clumens)- Our overridden AutoPart class must be mentioned in commandMap. (clumens)- Reword filter UI introductory text to be less confusing. (clumens)- Install the driver discs according to what was loaded in stage1 (msivak)- Use the updated DriverDisc code in loader (msivak)- Backport the RHEL5 DriverDisc functionality (msivak)- Include depmod in stage1 and set it to prefer the DD directory (msivak)- Add a function to get paths to loaded modules (msivak)- Add rpm extraction routines (use librpm and libarchive) (msivak)- Add DriverDisc v3 documentation (msivak)- When displaying the filter UI, check devices that are in exclusiveDisks. (clumens)- get rid of global import of anaconda_log (akozumpl)- introduce loglevel flag and use it in yum\'s tty3 logging (akozumpl)- Remove LoggerClass but maintain loglevel= functionality (akozumpl)- Do not duplicate exclusiveDisks when going back to filtering UI. (rvykydal)- Fixes problems in the manual network configuration screen in loader with IPv6. (akozumpl)- Bring back missing IPv6 pieces that were lost in time. (dcantrell)- Add configuration option to enable/disable IPv6 support. (dcantrell)- Ask about LVM inconsistencies only in storageinit step. (rvykydal)- Ask about disk initialization only in storageinit step. (rvykydal)- Fix partition request sorting based on number of allowed disks. (#540869) (dlehman)
* Wed Jan 06 2010 Chris Lumens - 13.16-1- Add libblkid as a BuildRequires. (clumens)
* Wed Jan 06 2010 Chris Lumens - 13.15-1- Also remove requirement for libbdevid (hdegoede).- Update the python-pyblock version requirement, too. (clumens)- Bump the required version numbers on a couple of components. (clumens)- ID_BUS is not always defined (on virt, for instance) so handle that. (clumens)- opts should always be treated as a list inside isys.mount(). (clumens)
* Mon Jan 04 2010 Chris Lumens - 13.14-1- Include fontconfig files needed for scaling of Meera fonts (#531742, - Don\'t write dracut kernel cmdline paramters to anaconda-ks.cfg (hdegoede)- Write dracut rd_NO_foo options to grub.conf (hdegoede)- Add dracutSetupString methods to all relevant device classes (hdegoede)- Avoid duplicate kernel cmdline options and cleanup booty dracut code (hdegoede)
* Wed Dec 23 2009 Chris Lumens - 13.13-1- lsreipl from s390-utils uses incorrect path (hamzy).- fix for a bug in 05ce88b2 that split one line over several in program.log (akozumpl)- Dump the initial and final state of the system\'s storage devices. (dlehman)- Add a \"dict\" attribute to Device and DeviceFormat classes. (dlehman)- Sort Storage.devices by name (not path) for consistency. (dlehman)- Put fsprofile support back in. (dlehman)- Fix reset of lvm filtering (#527711) (rvykydal)- Fix bootloader driveorder dialog. (rvykydal)- Fix selection of default boot target in UI (#548695) (rvykydal)- \'cleardiskssel\' typos that made it impossible to run text install. (akozumpl)
* Fri Dec 18 2009 David Cantrell - 13.12-1- Use the per-disk flag to disable cylinder alignment for msdos disklabels. (dlehman)- Don\'t include advanced devices in the total count on the basic filter UI. (clumens)- For iSCSI devices, put the path into the UI instead of a WWID. (clumens)- Add udev_device_get_path. (clumens)- Make Callbacks._update_size_label callable from outside the object. (clumens)- Do not show the \"Add Advanced\" button on the basic filtering screen. (clumens)- Log into program.log through the standard python logging (part of - Fix typo from commit 13022cc2. (dlehman)- Restore accidentally removed line in backend.py (hdegoede)- yuminstall: Fix indentation error (hdegoede)- No need to special case ignoring of dmraid sets (hdegoede)
* Wed Dec 16 2009 Chris Lumens - 13.11-1- Clean up setting paths on preupgrade (jvonau). (clumens)- And call freetmp, too. (Jerry)- Add a method to remove /tmp/install.img on low memory conditions (jvonau). (clumens)- Make sure /mnt/stage2 is mounted before trying to unmount. (Jerry)- Skip the mediaDevice check before attempting to mount the install.img. (Jerry)- Remove install.img from /boot during preupgrade. (Jerry)- Add __str__ methods to the DeviceFormat classes. (dlehman)- Expand PartitionDevice.__str__ to include partition geometry and flags. (dlehman)- Hide biosraid member devices that contain MDRaidMember formats. (dlehman)- Move disklabel handling into handleUdevDeviceFormat with the others. (dlehman)- DiskDevice.__init__ expects an \"exists\" parameter, so add it. (clumens)- Fix multipath filtering. (clumens)- Log error messages before displaying dialogs. (clumens)- Include error messages when logging selinux context get/set failures. (dlehman)- Catch failures to set selinux contexts so it doesn\'t cause a crash. (dlehman)- Fix typo logging failure to get default file context. (dlehman)- Use DiskLabel.alignment instead of getDiskAlignment. (dlehman)- Add an alignment property to DiskLabel. (dlehman)- iscsi.py: Do not translate log messages (hdegoede)- Make iscsi,etc startup use the iscsi,etc Singletons (hdegoede)- kickstart: Move onlining of fcoe/iscsi/zfcp devices to parse phase (hdegoede)- Make the fcoe, iscsi and zfcp classes singletons (hdegoede)- Remove call to no longer existing isys DriveDict method (hdegoede)- Use the correct yum configuration file when searching for the -logos package (kanarip)- Fix two missing closing parens in previous commits. (clumens)- Add an interface to select the fancy filtering UI vs. the regular one. (clumens)- Add a step to prompt for the cleardisks UI. (clumens)- Add a dialog to configure advanced storage devices. (clumens)- Add an early user interface for filtering storage devices. (clumens)- Rework the upgrade vs. install screen a bit to make it look nicer. (clumens)- Add the updated and simplified parttype screen. (clumens)- Add a method to determine whether a device is a CCISS RAID device. (clumens)- Move identifyMultipaths from DeviceTree to devicelibs. (clumens)- Add a method to return a device\'s WWID. (clumens)- Add a method to get the bus/interconnect from udev and store it on devices. (clumens)- Add a vendor getting udev method, though udev doesn\'t always know it. (clumens)- Add the serial number to all DiskDevices and subclasses. (clumens)- Put less space between rows and allow text to be longer before wrapping. (clumens)- Allow InstallInterfaces to modify the installation steps. (clumens)- Default /boot to 500 MB. (clumens)- Some iscsi cleanups (hdegoede)- Bring auto discovered drives online before parsing the ks file (hdegoede)- Make a better effort at tearing down everything before action processing. (dlehman)- Tighten restrictions on the type of disklabel on x86 and EFI boot disks. (dlehman)- Use string instead of parted.diskType for disklabel types. (dlehman)- A couple of cleanups to warnings about formatting preexisting devices. (dlehman)- Rework udev_settle timeout handling (#544177) (hdegoede)- Remove smp.c from the Makefile.am, too. (clumens)- Nothing has a kernel-smp anymore so none of this code is useful. (clumens)- Get rid of the goofy nested try statements. (clumens)- update reIPL messages (hamzy)- Change btrfs command line option (josef)
* Wed Dec 09 2009 Chris Lumens - 13.10-1- Kickstart support for unpartitioned disks. (dlehman)- Skip disklabel handling for biosraid and multipath members. (dlehman)- Improve disklabel\'s name attr so we don\'t have to hide them anymore. (dlehman)- Hide devices with certain formatting in the main partitioning UI. (dlehman)- Automatic partitioning support for whole-disk formatting. (dlehman)- Add support for whole-disk formatting. (dlehman)- Add per-row control over sensitive property for CheckList and WideCheckList. (dlehman)- Use a function to add a device to the partition gui. (dlehman)- Don\'t crash if there\'s no intf passed to getLUKSPassphrase. (dlehman)- Remove unused selinux file context functions from isys. (dlehman)- Use selinux python module for file context operations. (dlehman)- Obtain device alignment information from parted. (#529051) (dlehman)- Handle roots with or without trailing \"/\" in FileDevice.path. (#541473) (dlehman)- sundries.h is no longer used. (clumens)- Kill yet another unused lodaer flag. (clumens)- stage1 (init): Make /tmp tmpfs large enough to hold install.img (#540146) (hdegoede)- With flags.setupFilesystems gone, justConfig can be removed from booty. (clumens)- Nothing sets flags.setupFilesystems anymore, so it can go too. (clumens)- Remove test mode from the loader, too. (clumens)- Complain if we\'re started in test or rootPath mode instead of aborting. (clumens)- Remove test mode. (clumens)- Remove rootPath mode. (clumens)- Enable method/repo nfs options in stage2. (rvykydal)- Accept \"nfs:\" prefix in ks repo --baseurl setting beside \"nfs://\". (rvykydal)- Display url having invalid prefix in repo editing dialog. (rvykydal)- Do not traceback on invalid ks repo --baseurl values (#543003) (rvykydal)- Remove /etc/localtime before trying to copy into it (#533240). (akozumpl)- Whenever storage code tries to log a method call, do so into the \'tmp/storage.log\' file. (a part of #524980) (akozumpl)- Make loader log time with milliseconds (part of #524980). (akozumpl)- Log storage in the same format as the main anaconda log (a part of
* Tue Dec 08 2009 Dennis Gregorovic - 12.38.5-1.1- Rebuilt for RHEL 6
* Tue Dec 01 2009 Chris Lumens - 13.9-1- Improve text mode fcoe interface (hdegoede)- Fix udev rule to test whether we\'re in anaconda. (dlehman)- Fix devicelibs.dm.device_is_multipath support for new udev rules. (pjones)- Display progress or wait window when creating devices. (dlehman)- Display progress or wait window when formatting devices. (dlehman)- Add optional progress windows to devicelibs create functions. (dlehman)- Force mkswap to do its job. (dlehman)- Don\'t try to get dm node or update sysfs path for lvm vgs. (dlehman)- Log upon leaving installer steps as well as entering (a part of #524980). (akozumpl)- An unitialized variable in iw/partition_gui.py and a typo in kickstart.py (akozumpl)- Add DCB option to text mode FCoE setup (#513011) (hdegoede)- Add DCB option to GUI FCoE setup (#513011) (hdegoede)- Add DCB option to kickstart FCoE code (#513011) (hdegoede)- Add support for DCB to fcoe.py (#513011) (hdegoede)- Include fcoemon and dcbd in install.img for FCoE DCB support (#513011) (hdegoede)- Add RAID4 support (#541433) (oliva)- Clear a partition\'s BOOT flag when formatting it (hdegoede)- Do not set boot flag when there is already a partition with the flag (#533658) (hdegoede)- Fixes a syntax error in commit b495db2cd56c881a7e661ac55bd31069510cf662. (akozumpl)- If /boot is too small to preupgrade, don\'t allow going back (#499321). (clumens)- One reference to earlyKS somehow survived. Kill it. (clumens)- Quote backticks when writing out the .bash_history file, and add another cmd. (clumens)- Set the default keyboard based on language before showing the UI (#532843). (clumens)- Don\'t attempt to get the size of a filesystem unless it\'s supported (#540598). (clumens)- Require /boot to be on a GPT or MSDOS disk label on x86 (#540588). (clumens)- Fix killall -USR2 anaconda writing out a traceback file. (clumens)- Only check for DEVICE_DASD in S390.diskLabelType, not for all platforms. (clumens)- Use installclass to make the bootloader timeout 5 seconds on RHEL. (pjones)- Make sure we get tcp_wrappers-libs installed for stage 2 (pjones)- Mount usbfs before installing packages (#532397) (mmatsuya)- Use fs with largest amount of freespace to store install.img (hdegoede)- Always update booty drivelist before filling bootstore (#533335) (hdegoede)- Enhance drive specification for clearpart, ignoredisk, and partition. (clumens)- Add a function that determines which devices match a given shell glob. (clumens)- Extend udev_resolve_devspec to allow specifying devices in more ways. (clumens)- Name log files something that doesn\'t conflict with the system (#539542). (clumens)- Adds interactive install support for NFS options (#537764) (akozumpl)- Introduces check_asprintf macro that checks asprintfs return value and terminates program in OOM scenarios. (akozumpl)- Sleep if the kickstart file read fails (#537361) (akozumpl)- Move libcurl initialization to urlinstTransfer() (#537870). (dcantrell)- Replace all popt use with glib\'s option parsing code. (dcantrell)- Clean up initProductInfo() in loader.c. (dcantrell)- Use glib string parsing functions in driverselect.c. (dcantrell)- If a package has %pre/%post scriptlet errors, abort the install (#531599). (clumens)- If a package has a dependency problem, offer to continue/abort (#511801). (clumens)- Generate more complete device.map grub file when upgrading grub. (#533621) (rvykydal)- Added the libudev python bindings (mgracik)- If the kickstart log file\'s path doesn\'t exist, make it. (clumens)- Don\'t make chown or lsetfilecon errors fatal (#529940). (clumens)- Get correct boot device in reIPL code for s390 (#537390). (hamzy)- Expand the proxy table a little bit to reduce clutter (#537878). (clumens)- Use glib data structures in loader\'s module handling code. (dcantrell)- Various improvements to kickstart scriptlet reporting (#510636). (clumens)
* Thu Nov 12 2009 David Cantrell - 13.8-1- Ignore merge commit messages when generating the rpm changelog. (dcantrell)- Remove last references to hal. (dcantrell)- Log calls to DiskLabel\'s commit and commitToDisk methods. (dlehman)- Fix DiskLabel.status so it returns True, not self.partedDisk, when active. (dlehman)- Write /etc/dasd.conf to target system on s390 (#533833). (dcantrell)- Latest dracut has new syntax for rd_DASD. (dcantrell)- Handle case of not enough space in VG more gracefully. (#533797) (dlehman)- Make sure partitioning-related drive lists are sorted properly. (#534065) (dlehman)- Remove the early kickstart processing pass (#532453). (clumens)- Move all the important stuff out of the KickstartCommand.parse methods. (clumens)- These changes require a later version of pykickstart. (clumens)- commandMap and dataMap are now updates to the existing dict. (clumens)- Set a reference to the kickstart handler on BaseData objects. (clumens)- Move exception setup to right after instdata is populated. (clumens)- Leave one free logical block before each logical partition. (dlehman)- Use Chunk\'s geometry attr to access the parted Geometry. (dlehman)- Fix sorting of requests by mountpoint. It was backwards. (dlehman)- Align logical partitions\' start sector up one logical block for metadata. (dlehman)- Use parted.Device\'s sectorSize attr instead of physicalSectorSize. (dlehman)- Select partition layout based on potential for growth. (dlehman)- Reimplement partition growing. (dlehman)- Create and use a function to obtain a parted alignment for a disk. (dlehman)- Create and use a new function to create and add new partitions to disk. (dlehman)- Make and use a new function to remove non-existent partitions. (dlehman)- Disable parted\'s cylinder alignment code. (dlehman)- Use new functions for conversion between size and sector count. (dlehman)- Consider whether a partition is growable when choosing free space. (dlehman)- Allocate fixed-size requests before growable requests. (dlehman)- For the catch-all case, put the message into the UI, not the exn (#536854). (clumens)- Add a missing binary to KEEPFILES (#533237) (msivak)- Set boot flag for /boot on mdraid 1 array too (#533533). (rvykydal)- Report no media present for cpqarray controllers with no disks attached (hdegoede)- Honor existing RUNKS conf file variable on s390 (#513951). (dcantrell)- Add \"Hipersockets\" to qeth NETTYPE description (#511962). (dcantrell)- Set custom_icon to error for advanced storage dialog errors (hdegoede)- When creating a new md array check we have enough members (#533027) (hdegoede)- Convert string.find calls into something modern (jkeating)- rescue: Don\'t copy install.ing to /tmp when not enough RAM (#531304, - isys: remove stray debug printf (#533597) (hdegoede)- Don\'t activate / de-activate dmraid sets on setup / teardown (hdegoede)- Remove previous mdadm bug 523334 workaorund (hdegoede)- Don\'t stop mdraid containers or their arrays (#532971) (hdegoede)- Include the command line to put anaconda into debugger mode in history. (pjones)- Allow remote(ish) debugging. (pjones)- Make sure /var/log/lastlog is there so we don\'t have ugly logs. (pjones)- Correct modopts initialization in loader (take 2) (#531932). (dcantrell)- Get rid of dead code, and fix gettimespecofday\'s math. (pjones)- Don\'t exec without forking first when calling udevadm. (pjones)- If init or loader exit unexpectedly, traceback. (pjones)- Fix the vim magic in this file to work. (pjones)- Add handling for sshpw command. (pjones)- Improve createLuserConf behavior and chroot behavior in users.
* (pjones)- Improve logging of ssh-keygen. (pjones)- Remove tabs in \"anaconda\" (pjones)- pidof is a symlink to killall5, so we need that as well. (pjones)- Correctly initialize modopts in loader (#531932). (dcantrell)- Increase the size of /boot a little bit (#530555). (clumens)- Modify autopart requests to include a separate /home (#150670). (clumens)- Take the spec\'s requiredSpace into account when creating LVs. (clumens)- Add the PartSpec.__str__ method for debugging. (clumens)- Trim the inital / off the mountpoint before making an LV name from it. (clumens)- Remove \"anaconda\" from attributes to skip (#532612, #532737). (clumens)- Fix status for and consolidate handling of \'-\' in vg/lv names. (#527302) (dlehman)- Rename \"setupShellEnvironment\" to \"setupSshd\". That\'s all it does. (pjones)- Put \"killall -USR2 anaconda\" in a pre-populated history. (pjones)- Only try to split proxy commands out if there\'s actually one specified. (pjones)- Consolidate the parsing of nfs: locations for ks= and stage2= (#529197) (stijn)- Copy cio_ignore kernel parameter to zipl.conf on s390 (#475675). (dcantrell)- Do not modify /etc/hosts from setup package (#530343). (dcantrell)- In execWithCallback(), support disabling stdout echo (#528386) (dcantrell)- Select drives in partition dialog, preserving settings. (#529931) (dlehman)- Clear pot and po updates after a \'make release\' or \'make archive\'. (dcantrell)- Use the new anaconda image in fedora-logos (#529267). (jkeating)- Call udev_trigger with a \"change\" action and don\'t filter out dm devices. (dlehman)- Remove unused attr_nomatch keyword argument from baseudev.udev_trigger. (dlehman)- Fix logging of isys mount/umount into program.log. (rvykydal)- Fix \"resize failed: 1\" errors for ext2/ext3/ext4 (#517491). (dcantrell)- Log why we\'re exiting the installer in storage.DASD.startup() (dcantrell)- Improve detailedMessageWindow() in text.py. (dcantrell)- Use \'zerombr\' kickstart command for DASDs needing dasdfmt (#528386). (dcantrell)- Add \'zerombr\' to list of early kickstart commands we look for. (dcantrell)
* Thu Nov 12 2009 David Cantrell - 12.38.5-1- Log calls to DiskLabel\'s commit and commitToDisk methods. (dlehman)- Fix DiskLabel.status so it returns True, not self.partedDisk, when active. (dlehman)- Write /etc/dasd.conf to target system on s390 (#533833). (dcantrell)- Latest dracut has new syntax for rd_DASD. (dcantrell)- For the catch-all case, put the message into the UI, not the exn (#536854). (clumens)- Add a missing binary to KEEPFILES (#533237) (msivak)- Honor existing RUNKS conf file variable on s390 (#513951). (dcantrell)- Add \"Hipersockets\" to qeth NETTYPE description (#511962). (dcantrell)
* Mon Nov 09 2009 David Cantrell - 12.38.4-1- Remove previous mdadm bug 523334 workaorund (hdegoede)- Don\'t stop mdraid containers or their arrays (#532971) (hdegoede)- Correct modopts initialization in loader (take 2) (#531932). (dcantrell)- Initialize DASD totalCylinders before progress bar callback (#532420). (dcantrell)- Correctly initialize modopts in loader (#531932). (dcantrell)- Remove \"anaconda\" from attributes to skip (#532612, #532737). (clumens)- Copy cio_ignore kernel parameter to zipl.conf on s390 (#475675). (dcantrell)- Do not modify /etc/hosts from setup package (#530343). (dcantrell)- In execWithCallback(), support disabling stdout echo (#528386) (dcantrell)- Clear pot and po updates after a \'make release\' or \'make archive\'. (dcantrell)
* Fri Oct 30 2009 Chris Lumens - 12.38.3-1- Regardless of where load_policy is, we still need it in the intird (#532016). (clumens)- Log why we\'re exiting the installer in storage.DASD.startup() (dcantrell)- Improve detailedMessageWindow() in text.py. (dcantrell)- Use \'zerombr\' kickstart command for DASDs needing dasdfmt (#528386). (dcantrell)- Add \'zerombr\' to list of early kickstart commands we look for. (dcantrell)- TypeError: \'_ped.DiskType\' object is not callable (#531730) (hdegoede)- Remove support for IUCV networking devices on s390. (#531494) (dcantrell)
* Thu Oct 29 2009 Chris Lumens - 13.7-1- TypeError: \'_ped.DiskType\' object is not callable (#531730) (hdegoede)- Fix upgrade of GRUB with md raid boot for versions F11 and earlier. (rvykydal)- Remove another code duplication in grub upgrade code. (rvykydal)- Remove code duplication, use fixed code from writeGrub. (rvykydal)- Remove target parameter from grub installation code - it is no more needed. (rvykydal)- Remove support for IUCV networking devices on s390. (#531494) (dcantrell)- Find and format any unformatted DASD devices (#528386). (dcantrell)- Improve detailedMessageWindow() in text.py. (dcantrell)- Create execWithCallback() function in iutil. (dcantrell)- preexist -> onPart (#531407). (clumens)- Add sshd support for non-s390 platforms. (pjones)- When doing initlabel on a dasd disk create a dasd disklabel (#531209) (hdegoede)- Rename platform.diskType to platform.diskLabelType (hdegoede)- Fix arrow key cycling in the Edit Partition dialog (#519641). (clumens)- Provide a single checkbox for a minimal install (#523839). (clumens)- Fix DASD and zFCP device discovery (#530287). (dcantrell)- Clarify the shrink target message (#530789). (clumens)- Re-enable running udevadm. (clumens)- max_logical -> max_logicals (#530786). (clumens)- Filter out device-mapper devices when doing a udev_trigger. (dlehman)- Expand udev_trigger to allow attr filtering and action specification. (dlehman)- More udev fixups for device-mapper and cryptsetup temp devices. (#526699) (dlehman)- Add the bcm5974 kernel module needed for some touchpads (#474225). (clumens)- /boot is already being checked by the superclass, so don\'t check again. (clumens)- Allow /boot to be on a variety of filesystems during kickstart (#529846). (clumens)- Platform.bootloaderPackage -> Platform.packages (clumens)- Bootloader choice strings were marked with N_, but never translated (#530017). (clumens)- Handle more than x.y version numbers in \'make bumpver\'. (dcantrell)- Mark live device as protected instead of ignoring it. (#517260) (dlehman)- Don\'t force logical with a free primary slot and an extended. (#527952) (dlehman)- Use rpm to determine how to set bootloader args and default runlevel (#527520). (clumens)- Improve message given to user for fsck failures (#527626). (dcantrell)- \'Packages completed\' string should use P_() instead of N_(). (dcantrell)- Reintegrate reipl to trigger reboot/halt on s390x correctly. (#528380) (maier)- Put the icon back on the Back button on livecd installs (#526925). (clumens)- Make LOADER_FLAGS_NOSHELL default also for s390x not just s390 (#527063) (maier)- Adapt standalone shutdown to nokill changes so s390x can use it. (#528380) (maier)- Add dracutSetupData() method to DASDDevice (#526354). (dcantrell)- Collect DASD kernel parameter information during device tree scan (#526354). (dcantrell)- Add dracutSetupString() method to ZFCPDiskDevice (#526354). (dcantrell)- Write LAYER2 and PORTNO correctly as parts of OPTIONS to ifcfg for s390x (maier)- Don\'t set unnecessary multipath defaults. (pjones)- Add a \"File Bug\" button to all possibilitys in turnOnFilesystems (#528006). (clumens)- For cmdline mode, add the long text to what messageWindow will print (#528006). (clumens)- Use /dev/mapper/live-osimg-min instead of the old device node name (#526789). (clumens)- Remove double slash from nfs:// ks repo value for use in UI. (rvykydal)- Make bootLoaderInfo new-style class, so that its properties work correctly. (rvykydal)- liveinst: deactivate mdraid arrays before running liveinst (#528235) (hdegoede)- Set parted filesystemtype for swap partitions (hdegoede)
* Wed Oct 28 2009 Chris Lumens - 12.38.2-1- Find and format any unformatted DASD devices (#528386). (dcantrell)- Improve detailedMessageWindow() in text.py. (dcantrell)- Create execWithCallback() function in iutil. (dcantrell)- When doing initlabel on a dasd disk create a dasd disklabel (#531209) (hdegoede)- Rename platform.diskType to platform.diskLabelType (hdegoede)- DASD disklabels do not allow sector exact partitioning (#527104) (hdegoede)- Fix DASD and zFCP device discovery (#530287). (dcantrell)- Pull nss libs from $LIBDIR rather than /usr/$LIBDIR. (dcantrell)- iutil.isPPC() should return \'ppc64\' for RHEL-6. (dcantrell)- /sbin/load_policy -> /usr/sbin/load_policy (dcantrell)- RHEL-6 has system-config-firewall base. (dcantrell)- Inherit RHEL-6 branch changelog entries from dist-cvs. (dcantrell)- Fix translations of timezones in the UI (#530014). (clumens)- Bootloader choice strings were marked with N_, but never translated (#530017). (clumens)
* Tue Oct 20 2009 David Cantrell - 12.38.1-1- Handle more than x.y version numbers in \'make bumpver\'. (dcantrell)- Add \'.0\' to the version since we branched from f12-branch. (dcantrell)- Reintegrate reipl to trigger reboot/halt on s390x correctly. (#528380). (maier)- Make LOADER_FLAGS_NOSHELL default also for s390x not just s390 (#527063). (maier)- Adapt standalone shutdown to nokill changes so s390x can use it. (#528380). (maier)- Add dracutSetupData() method to DASDDevice (#526354). (dcantrell)- Collect DASD kernel parameter information during device tree scan. (#526354). (dcantrell)- Add dracutSetupString() method to ZFCPDiskDevice (#526354). (dcantrell)- Add a \"File Bug\" button to all possibilitys in turnOnFilesystems. (#528006). (clumens)- For cmdline mode, add the long text to what messageWindow will print. (#528006). (clumens)- Write LAYER2 and PORTNO correctly as parts of OPTIONS to ifcfg for s390x. (maier)- liveinst: deactivate mdraid arrays before running liveinst (#528235). (hdegoede)
* Tue Oct 20 2009 Dennis Gregorovic - 12.38-1.3- clean up references to kernelxen
* Tue Oct 20 2009 Dennis Gregorovic - 12.38-1.2- refactored anaconda-i686.patch
* Tue Oct 13 2009 David Cantrell - 13.6-1- BR system-config-keyboard (dcantrell)
* Tue Oct 13 2009 David Cantrell - 13.5-1- Remove extra echo in \'make rpmlog\'. (dcantrell)- Do not traceback if network device doesn\'t have HwAddress property (#506013). (rvykydal)- Fix liveinst to (1) not unmount /dev/pts, (2) unmount in order (509632). (clumens)- Do not read DASD data from /tmp/install.cfg in booty (#526354). (dcantrell)- Merge branch \'master\' of ssh://git.fedoraproject.org/git/anaconda (notting)- Support upgrading when the language isn\'t in lang-table (#528317). (clumens)- Fix task selection when tasks contain the same group. (#528193) (notting)- Update drivelist with bootloader --driveorder ks option instead of replacing it (#506073). (rvykydal)- Use ID_SERIAL to write multipath.conf, but ID_SERIAL_SHORT for UI. (pjones)- Don\'t run 70-anaconda.rules on an installed system (#527781). (clumens)- Handle Installation Repo (base repo) as any other in repo edit UI. (rvykydal)- Fix methodstr editing dialog. (rvykydal)- Store methodstr url of repo (#502208, #526022). (rvykydal)- Show user of which repository he edits the url (methodstr editing). (rvykydal)- Don\'t traceback with malformed repo= nfs: parameter. (rvykydal)
* Tue Oct 13 2009 Dennis Gregorovic - 12.38-1.1- Rebuild for RHEL 6
* Tue Oct 13 2009 David Cantrell - 12.38-1- Remove extra echo in \'make rpmlog\'. (dcantrell)- Do not traceback if network device doesn\'t have HwAddress property (#506013). (rvykydal)- Fix liveinst to (1) not unmount /dev/pts, (2) unmount in order (509632). (clumens)- Do not read DASD data from /tmp/install.cfg in booty (#526354). (dcantrell)- Fix task selection when tasks contain the same group. (#528193) (notting)- Update drivelist with bootloader --driveorder ks option instead of replacing it (#506073). (rvykydal)- Use ID_SERIAL to write multipath.conf, but ID_SERIAL_SHORT for UI. (pjones)- Handle Installation Repo (base repo) as any other in repo edit UI. (rvykydal)- Fix methodstr editing dialog. (rvykydal)- Store methodstr url of repo (#502208, #526022). (rvykydal)- Show user of which repository he edits the url (methodstr editing). (rvykydal)- Don\'t traceback with malformed repo= nfs: parameter. (rvykydal)
* Mon Oct 12 2009 David Cantrell - 13.4-1- Missing volume_key shouldn\'t break LUKS support completely. (#526899) (dlehman)- Write multipathd.conf in anaconda so that dracut can find it. (pjones)- We moved from dialog to newt.. (#528497) (msivak)- Fix a segfault when stage2= boot parameter and kickstart url method is used (#524417). (rvykydal)- Fix parsing of optional portnr in iscsi target IP (#525118) (hdegoede)
* Mon Oct 12 2009 David Cantrell - 12.37-1- Missing volume_key shouldn\'t break LUKS support completely. (#526899) (dlehman)- Write multipathd.conf in anaconda so that dracut can find it. (pjones)- Add MultipathDevice.getDMNode(), because .updateSysfsPath() needs it. (pjones)- Add MultipathDevice.updateSysfsPath() (pjones)- Fix a segfault when stage2= boot parameter and kickstart url method is used (#524417). (rvykydal)- Fix parsing of optional portnr in iscsi target IP (#525118) (hdegoede)
* Fri Oct 09 2009 David Cantrell - 13.3-1- Reset PartitionDevice attributes after failed edit. (#498026) (dlehman)- Add MultipathDevice.getDMNode(), because .updateSysfsPath() needs it. (pjones)- Add MultipathDevice.updateSysfsPath() (pjones)- Run implantisomd5 on boot.iso on x86. (bz#526902) (pjones)- Consider encryption when checking for duplicate mountpoint. (#526697) (dlehman)- Fix grub stage1 installation for /boot on md raid1. (rvykydal)- Do not show the VNC-over-text question, when there is not enough memory for GUI (#527979) (msivak)- Fix filtering out of \'Sending translation for\' log messages in bumpver. (rvykydal)- Use addUdevPartitionDevice() for adding dmraid / multipath partitions (#527785) (hdegoede)- Set partedPartition system to the correct FS when creating an FS (hdegoede)- Reset parted flags in createFormat not destroyFormat (hdegoede)- Default to mbr bootloader target for mdraid 1 boot device too (#526822). (rvykydal)- Clear out state before calling XkbGetState. (clumens)
* Fri Oct 09 2009 David Cantrell - 12.36-1- Reset PartitionDevice attributes after failed edit. (#498026) (dlehman)- Fix cut/paste error in commit 299519d4a0693330ff6a50f3111d61feefabb0da. (dlehman)- Consider encryption when checking for duplicate mountpoint. (#526697) (dlehman)- Fix filtering out of \'Sending translation for\' log messages in bumpver. (rvykydal)- Use addUdevPartitionDevice() for adding dmraid / multipath partitions (#527785) (hdegoede)- Set partedPartition system to the correct FS when creating an FS (hdegoede)- Reset parted flags in createFormat not destroyFormat (hdegoede)- Default to mbr bootloader target for mdraid 1 boot device too (#526822). (rvykydal)- Clear out state before calling XkbGetState. (clumens)
* Thu Oct 08 2009 Radek Vykydal - 13.2-1- Override fstabSpec in PartitionDevice for by-path DASD (#526364). (dcantrell)- Create DASDDevice objects for DASD devices when building devicetree. (dcantrell)- Add udev_device_is_dasd() to detect DASD devices. (dcantrell)- Change existing call to deviceNameToDiskByPath(). (dcantrell)- Make storage.devices.deviceNameToDiskByPath() more robust. (dcantrell)- Do not copy over 70-persistent.rules if instPath is \'\' (#527707) (dcantrell)- Filter out \'Sending translation for\' log messages in bumpver. (dcantrell)- Don\'t copy _raidSet, but merely pass around a reference (hdegoede)- Action...Format setup device before modifying the partition table (hdegoede)- map() -> filter() in storage.writeEscrowPackets() (dcantrell)- lokkit has moved to a subpackage, so require that (#523709). (clumens)- Stop trying to run xrandr (#527678). (clumens)- Only initialize escrow packet code if there\'s devices that need it (#527668). (clumens)- On lookup of a PartedDevice also check for _ped.DeviceException (#527699) (hdegoede)- Set related ayum attributes if media is found when editing methodstr (#515441). (rvykydal)- In repo editing UI do not use object we are creating (#515441). (rvykydal)
* Thu Oct 08 2009 Radek Vykydal - 12.35-1- Override fstabSpec in PartitionDevice for by-path DASD (#526364). (dcantrell)- Create DASDDevice objects for DASD devices when building devicetree.. (dcantrell)- Add udev_device_is_dasd() to detect DASD devices. (dcantrell)- Change existing call to deviceNameToDiskByPath(). (dcantrell)- Make storage.devices.deviceNameToDiskByPath() more robust. (dcantrell)- Do not copy over 70-persistent.rules if instPath is \'\' (#527707) (dcantrell)- Filter out \'Sending translation for\' log messages in bumpver. (dcantrell)- Don\'t copy _raidSet, but merely pass around a reference (hdegoede)- Action...Format setup device before modifying the partition table (hdegoede)- map() -> filter() in storage.writeEscrowPackets() (dcantrell)- Only initialize escrow packet code if there\'s devices that need it (#527668). (clumens)- Stop trying to run xrandr (#527678). (clumens)- On lookup of a PartedDevice also check for _ped.DeviceException (#527699) (hdegoede)- Set related ayum attributes if media is found when editing methodstr (#515441). (rvykydal)- In repo editing UI do not use object we are creating (#515441). (rvykydal)
* Tue Oct 06 2009 David Cantrell - 13.1-1- Tell udev to ignore temporary cryptsetup devices. (#526699) (dlehman)- Have redhat.exec reference generic.prm, not redhat.parm (dcantrell)- Bring back cio_ignore=all, !0.0.0009 for generic.prm on s390x (#463544) (dcantrell)- Take 70-persistent-net.rules generated at installation (#526322) (dcantrell)- Use $LIBDIR to find the boot-wrapper file. (jkeating)- formatByDefault: Don\'t traceback when mountpoint is None (#522609) (hdegoede)- Don\'t warn /usr should be formatted when \"Format as:\" is already selected (hdegoede)- Bring up network interface before trying to use it for FCoE (hdegoede)- DMRaidArray: Don\'t report no media present when in teared down state (hdegoede)- Wait for udev to settle before trying to find dmraid sets in udev DB (hdegoede)- Implement the double click for free space on the bar view (jgranado)- Pass only cCB and dcCB to the StripeGraph classes. (jgranado)- React to a double click on a \"free row\" in the tree view. (jgranado)- Create getCurrentDeviceParent function. (jgranado)- Make sure we don\'t exceed the 80 character threshold (jgranado)- Display an LVM graph on the bar view when we click on the VG\'s free space (jgranado)- Add a free row in the LVM tree view when necessary. (jgranado)- Reorganize the tree view related to lvm. (jgranado)- Remove unneeded variable (jgranado)
* Tue Oct 06 2009 David Cantrell - 12.34-1- Tell udev to ignore temporary cryptsetup devices. (#526699) (dlehman)- Use $LIBDIR to find the boot-wrapper file. (jkeating)- Have redhat.exec reference generic.prm, not redhat.parm (dcantrell)- Bring back cio_ignore=all, !0.0.0009 for generic.prm on s390x (#463544) (dcantrell)- Take 70-persistent-net.rules generated at installation (#526322) (dcantrell)- formatByDefault: Don\'t traceback when mountpoint is None (#522609) (hdegoede)- Don\'t warn /usr should be formatted when \"Format as:\" is already selected (hdegoede)- Bring up network interface before trying to use it for FCoE (hdegoede)- DMRaidArray: Don\'t report no media present when in teared down state (hdegoede)- Wait for udev to settle before trying to find dmraid sets in udev DB (hdegoede)
* Mon Oct 05 2009 David Cantrell - 13.0-1- Remove an errant popd. Probably cut/paste error. (jkeating)- Only add the .img file to .treeinfo if it exists. (jkeating)- Make the netboot dir before trying to use it (jkeating)- Only write network --netmask if one has been defined (#527083). (clumens)- Add --label to anaconda-ks.cfg if needed (#526223). (clumens)- Fix existing size calculation for NTFS (#520627) (dcantrell)- Write label to filesystem if we have one set (#526226, #526242) (dcantrell)- Add wget to the initrd, which is required for rhts. (clumens)- Fix the check for no /boot request on PPC yet again (#526843). (clumens)- Surround the stage2= parameter in quotes for RHEL (#526863). (clumens)- Correct makeupdates script to work with deleted files. (jgranado)- Stop dragging mkinitrd into the install (hdegoede)- Add --keyword=P_ to xgettext command arguments. (dcantrell)- Use named parameters for translatable strings with multiple params. (dcantrell)- Change \'support\' to \'supported\' in UnknownSwapError dialog (#526549) (dcantrell)- Force interface up before checking link status (#525071). (dcantrell)- Only ignore partitions <1MB that are freespace. (#526445) (dlehman)- Try to include error messages in lvm/mdadm exceptions. (dlehman)- Add the create LV option. (jgranado)- Give the proper orientation to the gtk objects. (jgranado)- Show the information message when user hits a non-bar element. (jgranado)- Control the sensitivity of the \"delete\" and \"create\" buttons (jgranado)- Respond to double click on a VG, LV and RAID device. (jgranado)- Remove the \"Hide RAID/LVM\" checkbox. (jgranado)- Display a message in the bar view when user has no selected items. (jgranado)- Cosmetic changes. (jgranado)- The StripeGraph class does not need tree nor editCB (jgranado)- Restrain from outputing any digits after the decimal point. (jgranado)- Add a slice when the extended partition contains \"free space\" (jgranado)- Reduce message size in clone screen. (jgranado)- Add Slice size to the bar view (jgranado)- Select the device in the treeview when its selected in the barview. (jgranado)- Make canvas a class method. (jgranado)- Incorporate all the Graph types in the custom screen. (jgranado)- Add the Volume Group and md RAID array Graph classes (jgranado)- Make the Bar View Code generic. (jgranado)- Pass the device instead of the name to the add funciton. (jgranado)- Display the device path with a smaller font and different color. (jgranado)- Display bar view for the selected device only. (jgranado)- Fix indentation in editCB (jgranado)- Organize the creation of the custom screen into sections. (jgranado)- Use a checkmark from a PNG image instead of a string. (jgranado)- Put the size after the device name in the storage tree. (jgranado)- Add the warning message for an invalid create. (jgranado)- Reorganize the Customization screen a little. (jgranado)- Remove unneeded functions & add the about messages for LVM and RAID. (jgranado)- Have an intermediary screen for the \"Create\" action. (jgranado)- New screen for \"Create\" action. (jgranado)- New function to tell us if there is free space for a new partition. (jgranado)- Edit LVM LV when user has a LV selected. (jgranado)- Don\'t fail to commit partitions due to active lvm/md. (dlehman)- Create and use DiskLabelCommitError for failure to commit. (dlehman)- Work around partition renumbering in processActions. (dlehman)- Re-get preexisting partitions using their original path. (dlehman)- Don\'t store a copy of ActionDestroyFormat\'s device attr. (dlehman)- Don\'t retry commiting partition table to disk (hdegoede)- Stop /lib/udev/rules.d/65-md-incremental.rules from messing with mdraid sets (hdegoede)- Don\'t try to do format handling on drives without media (#523467) (hdegoede)- Wait for mdraid arrays to become clean before reboot / halt (hdegoede)- Add repo --proxy= support to kickstart. (clumens)- Pass the proxy config information to stage2. (clumens)- Add support for proxies to the command line. (clumens)- Add proxy support to kickstart in the loader. (clumens)- Add a function to split up a proxy parameter into its parts. (clumens)- libcurl supports https in addition to http, so change our tests. (clumens)- getHostAndPath is only used by the nfs code, so move it. (clumens)- Add initial loader UI support for proxies (#125917, #484788, #499085). (clumens)- We no longer need our own FTP/HTTP protocol support code. (clumens)- Get rid of the convertURL/UI functions, make iurlinfo just store a string. (clumens)- Convert urlinstall.c to using the new urlinstTransfer function. (clumens)- Add proxy support to urlinstTransfer by setting more curl options. (clumens)- Add the urlinstTransfer function, which replaces urlinst
*Transfer. (clumens)- Add a function to construct an array of HTTP headers and cache the result. (clumens)- Add a CURL instance to the loader data. (clumens)- Add checks for libcurl into the makefile process. (clumens)- Add the packages needed to support libcurl. (clumens)
* Mon Oct 05 2009 David Cantrell - 12.33-1- Remove an errant popd. Probably cut/paste error. (jkeating)- Only add the .img file to .treeinfo if it exists. (jkeating)- Make the netboot dir before trying to use it (jkeating)- Fix existing size calculation for NTFS (#520627) (dcantrell)- Write label to filesystem if we have one set (#526226, #526242) (dcantrell)- Add wget to the initrd, which is required for rhts. (clumens)- Fix the check for no /boot request on PPC yet again (#526843). (clumens)- Surround the stage2= parameter in quotes for RHEL (#526863). (clumens)- Stop dragging mkinitrd into the install (hdegoede)- Force interface up before checking link status (#525071). (dcantrell)- Don\'t try to do format handling on drives without media (#523467) (hdegoede)- Wait for mdraid arrays to become clean before reboot / halt (hdegoede)- Stop /lib/udev/rules.d/65-md-incremental.rules from messing with mdraid sets (hdegoede)
* Tue Sep 29 2009 David Cantrell - 12.32-1- Improve loader messages in parseCmdLineFlags when passing vnc (#526350). (maier)- Update po/anaconda.pot during a \'bumpver\' run. (dcantrell)- Add \'make release\' as a synonym for \'make archive\'. (dcantrell)- Whitespace cleanup in loader/net.c. (dcantrell)- Clean up getHostandPath() debugging messages for host & file. (dcantrell)- Need an extra on the PS1 line in /.profile (dcantrell)- Korean font package name changed (#525597) (dcantrell)- We can\'t prompt for new network info in cmdline mode (#526262). (clumens)- yaboot supports /boot on ext4 (#526219). (clumens)- bootloader --append= should append, not set the args list (#524004). (clumens)- Don\'t check if /boot is under the 4MB mark on i/p Series (#526200). (clumens)- \"minimal\" has been renamed to \"core\" (#526191). (clumens)- Remove some unused isys methods. (clumens)- Make sure the disk holding /boot is setup before setting boot flag (#526063) (hdegoede)- Use temporary repo id for edited object to prevent Duplicate Repo error (#524599). (rvykydal)- Do not delete repo twice or when it had not been added actually (#524599). (rvykydal)- Disable repo before deleting it (#524599). (rvykydal)- Log more, repo editing UI. (rvykydal)- Make _enableRepo a little more readable. (rvykydal)
* Fri Sep 25 2009 David Cantrell - 12.31-1- Move S390MODS to inside makeBootImages(), remove libiscsi_tcp. (dcantrell)- Require the latest and greatest python-meh. (clumens)- Add a stub enableNetwork method for cmdline mode (#525779). (clumens)- Adapt to python-meh passing a bug description around. (clumens)- Return None for next part type if all primary slots full. (#524859) (dlehman)- Make sure the Minimal group is selected by default on RHEL installs (#524561). (clumens)
* Thu Sep 24 2009 Chris Lumens - 12.30-1- Simplify s390x module list generation. (dcantrell)- Read cmsfs
* commands from $IMGPATH/usr/sbin in mk-images (dcantrell)- Use correct kernel-bootwrapper on ppc64. (dcantrell)- Anaconda no longer requires hal. (notting)
* Tue Sep 22 2009 David Cantrell - 12.29-1- Updated po/anaconda.pot (dcantrell)- Remove ui/instkey.glade.h from po/POTFILES.in (dcantrell)
* Tue Sep 22 2009 David Cantrell - 12.28-1- Preserve whitespace in $CDLABEL in mk-images.x86 (dcantrell)- Modify rhel.py installclass for current RHEL development efforts. (dcantrell)- Add --brand switch support to buildinstall script. (dcantrell)- Remove the installation number screen. (clumens)- Remove kickstart-docs.txt, since it comes with pykickstart (#515168). (clumens)- ybin, mkofboot, and ofpath moved from /usr/sbin to /sbin (#524608). (clumens)- Honor ignoredisk --only-use. (#514353) (dlehman)- Make sure user-selected mountpoint is not already in use. (#524584) (dlehman)- Do not raise UI dialog in stage2 if network is set in ks (#487503). (rvykydal)- Use whiptail instead of dialog in rescue mode, supports serial line better and looks nicer (msivak)
* Mon Sep 21 2009 David Cantrell - 12.27-1- Require at least system-config-keyboard 1.3.1 or higher. (dcantrell)- Fixes for rhel installclass. (dcantrell)- Start with all modules from kernel/drivers/s390 on s390x (#524566) (dcantrell)- Do not require dhcpv6-client, package is now obsolete. (dcantrell)- Take into account snapshots and mirrored volumes in lvm dialogs. (dlehman)- Add handling for snapshot and mirrored logical volumes to DeviceTree. (dlehman)- Add attrs to LVMLogicalVolumeDevice class for snapshots and mirrored lvs. (dlehman)- Add function lvorigin to determine the name of a snapshot\'s origin lv. (dlehman)- Add function udev_device_get_lv_attr to retrieve lv attribute strings. (dlehman)- Include hidden volumes and lv attributes in udev db. (dlehman)- Add \'install\' user to start anaconda on s390x. (dcantrell)- Set a default shell prompt for s390x installs. (dcantrell)- Do not assume we found a module in addOption() in loader/modules.c (dcantrell)- Do not try to load floppy, edd, pcspkr, or iscsi_ibft on s390x. (dcantrell)- Handle Esc keypress in (some more) dialogs as Cancel - (#520110). (rvykydal)- All the nss libraries have moved from /lib to /usr/lib (#524410). (clumens)- Add python-nss as a requirement (#524307, #524313). (clumens)- Call $LDSO --verify for the binary file -inside- the chroot. This fixes building x86 boot images on a x86_64 host system. (thomas.jarosch)- Just grab everything in a /usr/share/fonts/lohit
* directory (#523906). (clumens)- Don\'t write an empty mdadm.conf (hdegoede)- Write mdraid arrays to mdadm.conf in sorted order (hdegoede)- containers and their sets must only have a UUID= parameter in mdamd.conf (hdegoede)- Updated anaconda.pot file. (dcantrell)
* Thu Sep 17 2009 David Cantrell - 12.26-1- NetworkManagerSystemSettings.service no longer exists. (jkeating)- udevsettle is no longer used (udevadm settle is called instead) so don\'t put it in images. (jkeating)- nm-system-settings is no longer shipped. (jkeating)- Port from PolicyKit to polkit (jkeating)- Keep po/anaconda.pot in the source tree (#522072) (dcantrell)- Do not show Unknown as filesystem type for free space. (dcantrell)- Catch failures from write(2) in utils/snarffont.c (dcantrell)- Don\'t leak fds (#520154) (jgranado)- Initialize the opts variable. (jgranado)- Add the help messages for the new options of makeupdates script. (jgranado)- Revert \"The Madan font should no longer be used (apparently). (#523906).\" (clumens)- Fix going back from hd install UI when stage2 is given as boot param (#519206). (rvykydal)- The Madan font should no longer be used (apparently). (#523906). (clumens)- Update the pykickstart requirement to reflect the escrow stuff. (clumens)- add requires for sparc arches on elftoaout and piggyback we need them to make the tftp image (dennis)- copy the sparc boot loader on all sparc arches (dennis)- make sure we include sparc boot loaders on all sparc arches (dennis)- make sure we get the sparc64 kernel on sparc (dennis)- Check whatever contains /boot on PPC as well as the bootable part (#523747). (clumens)- make a call to rpmutils to get the basearch works on all arches that dont have anaconda built on the basearch (dennis)- s-c-keyboard is now provided on all architectures (#523445). (clumens)
* Tue Sep 15 2009 David Cantrell - 12.25-1- Use pyblock for device-mapper devices\' status. (dlehman)- load_policy has moved from /usr/sbin to /sbin (#523506). (clumens)- Collect all modules from modules.{ccwmap|networking} on s390x (#522519) (dcantrell)- Copy cmsfscat from /usr/sbin, not /usr/bin. (dcantrell)- Remove duplicate search_cu() in linuxrc.s390 (dcantrell)- Try harder to stop mdraid arrays (hdegoede)- Log when we are skipping disks without media (hdegoede)- Don\'t scan stopped md devices (hdegoede)- Make udev_get_block_device() return None on failure (hdegoede)- Do not pass --update=super-minor to mdadm for containers and sets there in (hdegoede)- Write mdadm.conf lines for mdraid container formats (imsm) (hdegoede)- Really put appended kernel cmdline arguments at the end (hdegoede)- Install dracut-network when using network storage (hdegoede)- Make recreateInitrd() generate a dracut initrd (hdegoede)- Use type of device rather than name in booty target selection. (hdegoede)- write netroot=fcoe:... to kernel cmdline in grub.conf for dracut (hdegoede)- write ifname=eth#:MAC to kernel cmdline in grub.conf for dracut (hdegoede)- write iscsi initiator name to kernel cmdline in grub.conf for dracut (hdegoede)- Make iswmd the default (hdegoede)- Use new icons in anaconda so we don\'t look so dated (#515601). (clumens)- Prevent infinite loop in doClearPartitionedDevice. (dlehman)- Rename doDeleteDependentDevices to doClearPartitionedDevice for clarity. (dlehman)- Handle Esc keypress in dialogs as Cancel (#520110). (rvykydal)- Don\'t use baseurl containing space in yum repo object (#516042). (rvykydal)- Add escrow support (mitr)- Add python-{nss,volume_key} to stage2, volume_key to rescue (mitr)- Update for pykickstart with escrow support (mitr)- Fix --encrypted when creating volumes in kickstart (mitr)- Remove the \"Remove dmraid Device\" button, which isn\'t even hooked up. (clumens)- Require the right version of system-config-date (#523107). (clumens)- Fix setting of \"Add repository\" dialog title. (rvykydal)- Update state and name of repository in list after editing. (rvykydal)- Fix busy cursor in repo editing (#518529) (rvykydal)- Fix busy cursor stack popping when creating formats (#518529). (rvykydal)- Remove partitions in reverse order when clearing disks. (dlehman)- Improve the info provided to DeviceAction.__str__. (dlehman)- Include device id in log lines since partitions can get renumbered. (dlehman)- Don\'t try to preserve old format attrs when reinitializing pvs. (dlehman)- remove the no longer used initcb and initlabel DiskDevice.__init__ arguments (hdegoede)
* Thu Sep 10 2009 Chris Lumens - 12.24-1- dmidecode is in /usr/sbin, not /usr/bin. (clumens)- Add cmsfscat to the initrd on s390 as well (#522535). (clumens)- Fix the gawk/awk symlink mess in the initrd (#522535). (clumens)- No longer use /usr/bin/env (#521337). (clumens)- It\'s controlunits, not controlunits.sh. (clumens)- Get DMRaidArrayDevice\'s a DiskLabel format when they are added to the tree (hdegoede)- Fix askmethod + stage2= (#516973, #519288, #518194) (rvykydal)
* Wed Sep 09 2009 David Cantrell - 12.23-1- initrd-generic.img -> initramfs.img (hdegoede)
* Wed Sep 09 2009 David Cantrell - 12.22-1- No longer require xfsdump, since anaconda doesn\'t use it anywhere (#522180). (clumens)- The zonetab module has moved (#521986). (clumens)- No longer copy over the CD/DVD repodata or repo config file (#521358). (clumens)- language dracut kernel cmdline should be space seperated (#521113) (hdegoede)
* Mon Sep 07 2009 David Cantrell - 12.21-1- Require python-meh (#521661) (dcantrell)- Handle UnknownSwapError when turning on existing swap volumes. (dcantrell)- Check for a valid interface in swapErrorDialog, exit without one. (dcantrell)- On SuspendError, allow users to skip/format/exit like OldSwapError. (dcantrell)- Raise exception if detected swap volumes are not Linux v1 swap space. (dcantrell)- Handle OldSwapError (#510817) (dcantrell)- Support a force=True argument on SwapSpace.create() (dcantrell)- Skip all Makefiles and the liveinst subdirectory in \'make updates\' (dcantrell)- Make anaconda know its version number (#520061) (dcantrell)- Add top back to the stage2 image. (clumens)- Do not put device node path, but the fs UUID in fstab for mdraid: (#519337) (hdegoede)- Expose common fsset methods and properties in class Storage. (dcantrell)- Don\'t display the warning about not enough memory on a VNC install (#521109). (clumens)- The vtoc.h header has moved from the kernel to s390utils (karsten,
* Wed Sep 02 2009 David Cantrell - 12.20-1- Rename mostlyclean-glade to mostlyclean-liveinst. (dcantrell)- Handle rootPath referencing a chroot value or actual path (#519665) (dcantrell)- We convert cmdline args to longs in several places, so reduce to a function. (clumens)- Support rootpath overrides in fsset.rootDevice (#519665) (dcantrell)- Pass anaconda.rootPath to FSSet() (dcantrell)- Include ui, liveinst, and lang-table strings in po updates (#515411) (dcantrell)- Add some silent make support for sed, mkctype, and other commands. (dcantrell)- Recheck if a partition should be ignored after getting its disk (#518971) (hdegoede)- Fix traceback when editing a pre-existing logical volume (hdegoede)- Do not traceback on an usb cardreader with no card present (hdegoede)- Don\'t identify multi lun usb card readers as multipath (#517603) (hdegoede)- Device class does not have a format member (hdegoede)- Device class does not have a path member (hdegoede)- Simplify language.py to two basic settings, and a lot of support (#517569). (clumens)- clobber is a method of PartedDevice not PartedDisk (hdegoede)- Remove unused fsFromConfig method (hdegoede)- allocatePartitions: PartitionCount is a member of PartedDisk not DiskDevice (hdegoede)- New version. (clumens)- Fix storage/__init__.py:1857: non-keyword arg after keyword arg (hdegoede)- Remove a bunch of unnecessary semicolons (hdegoede)- pylint does not like )- Fix 55:udev_resolve_devspec: Using possibly undefined loop variable \'dev\' (hdegoede)- MDRaidArrayDevice.totalDevices is a read only property so don\'t write it (hdegoede)- storage/__init__.py:471:Storage.exceptionDisks: Undefined variable \'udev\' (hdegoede)
* Tue Sep 01 2009 Chris Lumens - 12.19-1- NetworkManager changed
*again
*, use libnm-glib.pc now. (dcantrell)- Save duplicates from /etc/fstab and don\'t traceback (#517498). (clumens)- Update fstab header to reference blkid instead of vol_id. (dlehman)- Sort fstab entries by mountpoint. (#498354) (dlehman)- Don\'t hardcode path to tune2fs. (dlehman)
* Fri Aug 28 2009 David Cantrell - 12.18-1- Append s390x packages to PACKAGES list, exclude /sbin/qetharp-2.4 (dcantrell)- On kickstart installs, you can\'t select a different parttype (#519137, #520058). (clumens)- Don\'t try to create a primary partition if all slots are taken. (#519784) (dlehman)- Fix handling of locked preexisting LUKS devices. (#502310) (dlehman)- Fix up handling of preexisting partitions. (dlehman)- Pick up mountpoint set for protected partitions. (#498591) (dlehman)- Ignore partitions belonging to disks we\'ve reinitialized. (dlehman)- Handle newly initialized disklabels whether via ks or prompt. (#519235) (dlehman)- Fix some indentation in the disklabel initialization block. (dlehman)- Use commitToDisk() instead of commit() when only changing flags (hdegoede)- Update PartitionDevice\'s partedPartition when the PartedDisks get reset (hdegoede)- Add --localscripts option to buildinstall. (dcantrell)- Add missing dependencies for linuxrc.s390 and lsznet in mk-images (dcantrell)- Re-enable login of root user in initrd.img (dcantrell)- Less log clutter with fixing ld64.so.1 symlink in instbin on s390x (dcantrell)- Fix typo in get_dso_deps() for searching /lib on s390x (dcantrell)- Add hfsplus and netconsole kernel modules (#519756, #519785). (clumens)- Adapt expandLangs to work with three character base lang names (#517770). (clumens)- Prevent resizes that would go past the end of the disk (#495520) (dcantrell)
* Wed Aug 26 2009 Chris Lumens - 12.17-1- dracut has initrd-generic- instead of initrd- (#519185) (hdegoede)- Do not try to commit disks changes to the os while partitions are in use (hdegoede)- disklabel.commit(): DeviceError -> DeviceFormatError (hdegoede)- A \"partition\" having no partedPartition shouldn\'t be a traceback (#519128). (clumens)- Add some debugging code so we know what\'s going on for #504986 (katzj)- Fix going back in \"Inst. Method\" and \"Configure TCP/IP\" screens in stage 1 (#515450) (rvykydal)- Fix going back from stage1 nfs/url setup dialog. (rvykydal)- When bringing up network in UI, update only ifcfg file of selected device (#507084). (rvykydal)- Update Optional packages button via popup menu too (#515912). (rvykydal)- Remove the firstadkit-plugin-grub from non-grub archs (msivak)- Use the path instead of the name for the questionInitialize function. (#517926) (jgranado)- Only add \"rhgb quiet\" to boot args for non-serial installs (#506508, - On rpm unpack errors, display a fatal error message (#452724). (clumens)- Use tee thread to ensure line buffered output to screen and log file at the same moment... (#506664) (msivak)- Ensure libraries are copied to initrd.img for xauth (#516369) (maier)- Import shutil for upgrades (#519011). (clumens)- Fix focus grabbing on both the password and hostname screens. (clumens)- x86 and EFI platforms can now have /boot on ext4. (clumens)- Use the Platform\'s idea of what filesystem /boot can be on. (clumens)- zz-liveinst.sh: Restore the #! line (ajax)- Import _ped so it can be used for _ped.DiskLabelException. (pjones)- Make sure LV and VG names fit within LVM limits (#517483) (dcantrell)- Fix updates target to honor KEEP variable correctly. (dcantrell)- Add support for the reiserfs filesystem (#504401) (dcantrell)- Update instructions on how to generate source archive. (dcantrell)- Use disk.description instead of trying to access parted attrs. (#518212) (dlehman)- Fix disk.partedDisk -> disk.format.partedDisk. (dlehman)- Fix a stupid typo in the logging. (clumens)- If modifying a repo fails, do not delete it (#516053). (clumens)- If repo setup fails, also make sure to delete it from yum. (clumens)- Allow configuring additional NFS repositories, not just the base. (clumens)- Consolidate \"base repo\" setup into an extra function. (clumens)- Allocate memory for login and password and do not meddle with host pointer so we can correctly free it (#483818) (msivak)- Run make in silent mode by default. (jgranado)- Allow creation of an updates image from a tag offset. (jgranado)
* Tue Aug 18 2009 David Cantrell - 12.16-1- correctly deactivate zFCP LUN on s390 (maier)- correctly activate zFCP LUN on s390 (maier)- prevent getting started up or shutdown again while already in such state (maier)- Remove unused reipl code in linuxrc.s390 (maier)- Fix copying of shutdown to initrd.img in mk-images for s390x (#517888) (maier)- 64 bit sparc linux does not define __sparc64__ we need to use \"(defined(__sparc__) && defined(__arch64__))\" fixes building 64 bit sparc (dennis)- make tftp images as small as possible. we have a 10mb hardware limitation on there size (dennis)- make sure we correctly make the sparc tftp image (dennis)- make sure we have glibc.sparcv9 installed in sparc installers not glibc.sparcv9v (dennis)- add the sparc screen font (dennis)- add the files for sparc boot config setup configure.ac to define IS_SPARC (dennis)- add mk-images.sparc script (dennis)- add support for making sparc images (dennis)- sparc no longer needs and special keyboard handling. it uses the standard api\'s interfaces (dennis)- setup termcap for sparc (dennis)- Close %packages with a %end (#518063) (katzj)- Call udev_settle from DiskLabel.commit to ensure it happens. (dlehman)- Fix traceback in text mode upgrade. (#505435) (dlehman)- Don\'t traceback if Delete button is hit when no device is selected. (dlehman)- Clean up management of extended partitions we create. (#497293) (dlehman)- Don\'t use StorageDevice for partitions w/ biosraid formatting. (#504002) (dlehman)- Don\'t try to get the size of fstypes w/ no infofsProg defined. (dlehman)- Change all disklabel manipulations to use the DiskLabel format class. (dlehman)- Create a DiskLabel format class for partition tables. (dlehman)- Add support for specifying a tag to makeupdates. (dlehman)- Include changed files from the top level in the updates. (dlehman)- If asked, put the system SN (as given by dmidecode) into an HTTP header. (clumens)- Add dmidecode to the initrd. (clumens)- Add the kssendsn parameter and corresponding flag. (clumens)- Don\'t keep testing if we\'re doing URL_METHOD_HTTP. (clumens)- Later pyparted will define DEVICE_DM, so change the test to use it. (clumens)- Use the new GTK Tooltip API (#517389). (clumens)- Fix a typo in a kickstart error string (#517760). (clumens)- Be sure we have a sorted list of mountpoints for live mangling (#504986) (katzj)- Fix askmethod to work with stage= being specified (#516973) (katzj)- Fix ordering on device list returned from identifyMultipaths() (pjones)- Fix typo in mpath support. (pjones)
* Wed Aug 12 2009 David Cantrell - 12.15-1- Make sure we have the ca cert to handle https repo connections. (517171) (jkeating)
* Wed Aug 12 2009 David Cantrell - 12.14-1- Correctly inform the user once about obsolete parm/conf file options on s390 (maier)- Handle activation of DASDs in linuxrc.s390 since loader no longer works (maier)- make IPv4 configuration in linuxrc.s390 compatible with NM in loader (maier)- suggest disabled X11-forwarding for ssh login in linuxrc.s390 (maier)- Fix an erroneous \"!\" in the test for doKill, and make reboot explicit. (pjones)
* Mon Aug 10 2009 David Cantrell - 12.13-1- Fix syntax error in identifyMultipaths() (dcantrell)
* Mon Aug 10 2009 David Cantrell - 12.12-1- Honor network config boot params for CD-booted ks installs (#433214) (dcantrell)- Include ipcalc command in all initrd.img files, not just s390 (#516084) (dcantrell)- Don\'t to unmount /mnt/source unless something\'s mounted there (#516304). (clumens)- Honor nodmraid commandline option (#499733) (hdegoede)- Don\'t try to multipath CD devices. (#516362) (pjones)- booty: Do not strip the trailing p from a devicename like mapper/isw_Vol0_tmp (hdegoede)- booty: isw_Vol0_Stripe is not a disk isw_Vol0_Stri with an e part (#505205) (hdegoede)
* Fri Aug 07 2009 Chris Lumens - 12.11-1- upd-instroot: Inspect gtkrc for cursor theme (ajax)- Support NFS repos in kickstart (#495620, #507093). (clumens)- upd-instroot: xorg-x11-auth -> xorg-x11-xauth (ajax)- Check to see if the arch string starts with ppc64. (#516144) (jgranado)- vtActivate doesn\'t work on some ppc64 machines, so don\'t traceback (#516206). (clumens)- Make all sysfs path\'s be _without_ /sys prefix (#516168) (hdegoede)- Do not go interactive if timezone in ks is not valid (#473647) (rvykydal)- Fix going back from \"NFS Setup\" screen in stage 1 (#507064) (rvykydal)
* Thu Aug 06 2009 David Cantrell - 12.10-1- Add missing \'i\' in loader/loader.c for non-s390 arches. (dcantrell)
* Thu Aug 06 2009 David Cantrell - 12.9-1- Avoid finding the word \'engine\' in comments. (jkeating)- Don\'t try to get dso deps of statically linked files. (jkeating)- Call shutDown() correctly for s390 (karsten)- Remove unused variable from loader/loader.c (karsten)- Delete unpackaged files on non-livearches. (karsten)- Do not set parted.PARTITION_BOOTABLE on s390. (root)- Complete udev setup in linuxrc.s390 for automatic module loading (root)- Recognize mpath devices when we see them. (pjones)- Make DiskDevice.partedDisk a property. (pjones)- Make questionInitializeDisk() somewhat less ugly. (pjones)- Add a description to DiskDevice, and use it in the UI. (pjones)- Get rid of Device.description, it is unused. (pjones)- Close the opened file descriptors when necessary. (#499854) (jgranado)- Add the glade files to the install image so save-to-bugzilla works (#515444). (clumens)- New system-config-keyboard has a different version then I expected (hdegoede)
* Wed Aug 05 2009 Chris Lumens - 12.8-1- Don\'t try to unmount the CD before we later unmount the CD (#515564). (clumens)- Do not offer going back when ugrade root for ks upgrade is not found (#499321) (rvykydal)- Rebuild .pot file and update translations. (clumens)- Import the logging stuff (#515564). (clumens)- Add keyboard kernel cmdline options to grub.conf for dracut (hdegoede)- Fix backtrace in network.dracutSetupString in the static ip case (hdegoede)- Write dracut i18n cmdline options to grub.conf (hdegoede)- Pass InstalltData to booty __init__ as it needs access to many of its members (hdegoede)- Fix ctrl-alt-deleter behavior /before/ end of install. (pjones)- Merge branch \'master\' of ssh://git.fedoraproject.org/git/anaconda (notting)- No longer use HAL in list-harddrives. (clumens)- The names of a couple basic udev methods has changed. (clumens)- Move basic udev methods out of the storage module (#514592). (clumens)- We do not actually require gtkhtml2 or the python bindings for it. (notting)- Fix some typos in rescue mode (#515091) (msivak)- Add a dracutSetupString method to network.py (hdegoede)- Fix backtrace due to iscsi.getNode() not finding the iscsi node (hdegoede)- Use dracutSetupString() method to add the kernel parameters needed for dracut (hdegoede)- Add a dracutSetupString method to devices.py classes (hdegoede)- Differentiate between ibft discovered and manually added iscsi disks (hdegoede)- Store iscsi node pointer in iScsiDiskDevice objects (hdegoede)- When checking logical partition dependcies, make sure the are one the same disk (hdegoede)- Only set iscsi nodes to autostart when none of the LUN\'s contain / (hdegoede)- Add functions to go from an iScsiDiskDevice to an libiscsi node (hdegoede)
* Fri Jul 31 2009 Chris Lumens - 12.7-1- Fix up udev sillies (related to #514501) (katzj)- Log when we unmount filesystems so we have a match for mount messages. (clumens)- Let\'s not exit from buildinstall.functions, say, ever (katzj)- Rework shutDown() to better accomidate \"nokill\" better. (pjones)- Make upgradeany boot option work again (#513227) (rvykydal)- Update device.map when upgrading (#513393) (rvykydal)- Catch None devs (katzj)
* Wed Jul 29 2009 Chris Lumens - 12.6-1- Fix CDLABEL substitution in syslinux.cfg for x86 boot.iso (katzj)- And finish off the removal of rhpl (katzj)- Use keyboard bits from system-config-keyboard now (katzj)- Use python-meh instead of our own exception handling now (clumens)- NM no longer exposes information through HAL (#514501). (clumens)- Put mkdir into /sbin on the initrd, too. (clumens)- Make sure controlunits.sh is installed to initrd on s390 (dcantrell)- Remove ChangeLog (#512502) (dcantrell)- Add s390utils-cmsfs in upd-instroot for s390 (dcantrell)- Make sure s390 gets /lib/ld64.so.1 (dcantrell)- Skip writeDisabledNetInfo() when loader starts on s390 (dcantrell)- Fix part --onpart= to print the device name instead of the __str__. (clumens)- Just pull in all python modules for stage2 (katzj)- Trim PACKAGES list in upd-instroot. (dcantrell)- Update linuxrc.s390 and friends to reflect review comments. (maier)- Log non-upgradable upgrade candidate roots. (rvykydal)- unmountFilesystems -> umountFilesystems (#510970). (clumens)- Disable devel repos on release (#503798) (katzj)- Work around problems with live installs and dpi other than 96 (#506512) (katzj)- Fix obvious typo in font name (katzj)
* Wed Jul 22 2009 David Cantrell - 12.5-1- New build because koji hates me.
* Wed Jul 22 2009 David Cantrell - 12.4-1- Add scripts/makeupdates to generate updates.img files. (dcantrell)- Add python-decorator to the stage2 image for pyparted (#513175). (clumens)- Set stage2= on x86 boot.iso (katzj)- Try to auto-find the CD even if stage2= is specified (katzj)- Make sure we have a device before check if it\'s protected. (#510033) (dlehman)- Remove unresolvable file devices from the devicetree. (#503830) (dlehman)- Support multiple fstab entries of a single nodev fstype. (#505969) (dlehman)- Refer to nodev devices as \"none\", not \"nodev\". (dlehman)- Change DeviceTree.devices from a dict to a list. (dlehman)- Show locked LUKS devices as \"Encrypted (LUKS)\", not \"LUKS\". (dlehman)- Allow creation of four primary partitions on a disk. (#505269) (dlehman)- Add a bunch more stuff to the initrd needed for networking. (clumens)- Add more things to /sbin on the initrd that udev requires. (clumens)- Add dmesg to the images. (clumens)
* Mon Jul 20 2009 David Cantrell - 12.3-1- Set GECOS field for new user accounts specific in ks files (dcantrell)- Show MAC address of network device in text mode too. (rvykydal)- Fix selection of alternative iface in UI after fail (#507084). (rvykydal)- Stop the cdrom device before ejecting (#505067) (msivak)- Add hipersockets to NETTYPE description (bhinson, #511962). (clumens)- Don\'t show formatting progress bar after mkfs has exited. (eric_kerin)- Run firstaidkit-qs script instead of the shell (shows rescue menu) (#508512) Add dialog package required for firstaidkit Create /etc/fstab in ramdisk to make mount commands easier (#440327) (msivak)- When ignoring partitions make sure lvm also ignores them (hdegoede)- 70-anaconda.rules: pass --ignorelockingfailure to lvm invocation (hdegoede)- Call mdadm -I with --no-degraded for all disks but the last (hdegoede)- There is no /bin on the initrd so sleep needs to go into /sbin. (clumens)- Add deviceNameToDiskByPath(). (dcantrell)- Display drive model and size in MB in partitioning UI (#460697) (dcantrell)- Lots of small grammar and wording changes. (pjones)- Edit user-visible dialogs for style. (pjones)- Get rid of sloppy elipses usage. (pjones)- Don\'t write optical devices to /etc/fstab (#505697). (clumens)- error messages of zFCP on s390: log or pass to the UI (maier)- correctly delete a SCSI device provided by a zFCP LUN on s390 (maier)- All other teardown methods take a \"recursive\" argument (#506166). (clumens)- Clean yum caches following preupgrade, too (#503096). (clumens)
* Thu Jul 09 2009 David Cantrell - 12.2-1- mdmon added to install.img (Jacek.Danecki)- Remove some unnecessary code. (clumens)- Use a method yum provides, rather than inventing our own. (clumens)- Remove _catchallCategory. yum handles this for us now. (clumens)- Write out NM_CONTROLLED=no for NICs used for FCoE (hdegoede)- Add support for biosraid using mdadm (hdegoede)- Reverse: \"Support for MD containers\" (hdegoede)- When all udev_is-foo() checks fail return instead of backtracing (hdegoede)- 70-anaconda.rules: always import blkid output (hdegoede)- Make sure to have \"self\" as an argument. (clumens)- Add kickstart fcoe command (hdegoede)- Use the yum preconf object to do $releasever substitution. (clumens)- Indicate LV status according to lv_attr active bit (#491754) (dcantrell)- Include lv_attr in lvm.lvs() return value. (dcantrell)- Fix list of 64-bit arches. (notting)- We also need -DUSESELINUX if we want to call matchPathContext. (clumens)- Clean up some arch code. (notting)- Update /etc/hosts with hostname for loopback IP address (#506384) (rvykydal)- Add missing LAYER2 and PORTNO handling for s390x. (dcantrell)- Ignore configure.ac when generating updates.img (dcantrell)- AC_ARG_WITH -> AC_ARG_ENABLE (dcantrell)- dhclient now reads config files from /etc/dhcp (dcantrell)- no \"rhgb quiet\" on s390 to enable visible boot progress and system automation (#509881) (maier)- fix backtrace in s390 reipl support due to missing anaconda.id.fsset (#509877) (maier)- Put sleep in /bin on the initrd (#505639). (clumens)- Also include the grep programs. (clumens)- Add programs from vim-minimal, coreutils, and util-linux-ng. (clumens)- Move programs that aren\'t s390-specific into the main image. (clumens)- Look for /bin/sh, not /sbin/busybox. (clumens)- No longer symlink binaries to busybox. (clumens)- No longer require busybox. (clumens)
* Mon Jul 06 2009 Chris Lumens - 12.1-1- Include the rest of the libs isys needs to link against (#509572). (clumens)- Add FCoE disks to the devicetree with a type of FcoeDiskDevice (hdegoede)- Add FcoeDiskDevice class to storage/devices.py (hdegoede)- Add FCoE support to storage/udev.py (hdegoede)- Write out configuration of FCoE to installed system (hdegoede)- Initial FCoE support (hdegoede)
* Thu Jul 02 2009 Chris Lumens - 12.0-1- network --bootproto no longer implies DHCP. (clumens)- Don\'t unconditionally skip the network config screen in kickstart. (clumens)- Allow creating new groups through kickstart. (clumens)- Set focus on hostname entry in network UI screen (#494135) (rvykydal)- Fix upgrade selected in UI after storage reset (#503302) (rvykydal)- Add support for specifying upgrade partition in ks (#471232) (rvykydal)- Add missing liveinst/
* files. (dcantrell)- Update code that checks for devices that contain install media. (dlehman)- Rework tracking of devices containing installation media. (#497087) (dlehman)- Add function storage.udev.udev_resolve_devspec. (dlehman)- Prevent false positives in devtree\'s device lookup methods. (dlehman)- Skip exceptionDisks if exn originated in devtree.populate. (#497240) (dlehman)- Stop using rhpl.arch in writeRpmPlatform() (katzj)- Move simpleconfig (back) into anaconda from rhpl (katzj)- Use iutil arch specifiers rather than rhpl (katzj)- Remove unused rhpl imports (katzj)- Switch to using iutil.isS390 instead of rhpl.getArch (katzj)- Stop using rhpl.translate (katzj)- Default to /boot on ext4 (katzj)- Allow /boot on ext4 now that we have a grub that allows it (katzj)- Make sure the library directory is always set (notting)- Write out \"MAILADDR root\" into mdadm.conf (#508321) (rvykydal)- Do not install grub more times than needed. (rvykydal)- Ensure we set the SELinux context correctly on symlinks (#505054) (katzj)- udev dropped vol_id (#506360) (katzj)- Handle installing multilib into the installer intramfs correctly. (notting)- Set LIBDIR appropriately on PPC64. (notting)- Fix grub upgrade (#505966) (rvykydal)- Include yum.log in anacdump.txt too. (rvykydal)- Access format options property instead of mountopts attr. (#506219) (dlehman)- Be more careful about identifying NFS fstab entries. (dlehman)- Don\'t add leading directory for files twice. (#503830) (dlehman)- booty changes for iswmd (Jacek.Danecki)- Support for MD containers. (Jacek.Danecki)- New iswmd parameter for kernel cmdline (Jacek.Danecki)- New udev rule for using mdadm for isw_raid_member (Jacek.Danecki)- Use isohybrid to make boot.iso a hybrid image (katzj)- Log yum messages. (rvykydal)- Tell booty to rescan for bootable drivers when an extra disks get added (hdegoede)- Do not encourage VNC when doing kickstart text installs (#506534) (dcantrell)- Rename bootstrap to autogen.sh (dcantrell)- Include the contents of /proc/cmdline in exception reports (katzj)- Include libwrap library for sshd and telnet in s390 installs (jgranado)- Enforcing matching rootfs type on LVs as well as for partitions (#504743) (katzj)- Remove problem packages before attempting a re-download (#501887). (clumens)- Be more explicit about what\'s lacking on EFI systems (#501341). (clumens)- If not enough memory is installed, enforce swap partition creation (#498742). (clumens)- Convert to using automake/autoconf. (dcantrell)- Convert po/ subdirectory to GNU gettext template system. (dcantrell)- Restructure liveinst/ for the new build system. (dcantrell)- Add m4/ subdirectory with autoconf macros. (dcantrell)- Removed py-compile script. (dcantrell)- Rename anaconda.spec to anaconda.spec.in (dcantrell)- Ignore autoconf and automake files in the tree. (dcantrell)- Removed toplevel Makefile and Makefile.inc (dcantrell)- Show MAC address of network device in combo box (#504216) (dcantrell)- Remove loader/tr/.cvsignore (dcantrell)- Increase max NIC identification duration to 5 minutes (#473747). (dcantrell)- Use /sbin/ipcalc for IP address validation (#460579) (dcantrell)- Fix an obvious traceback when doing part --ondisk= (#504687). (clumens)- Catch errors from bootloader installation (#502210). (clumens)- Remove umask temporarily so device permissions are correct (#383531, wmealing).- Remove the name check on driver disk packages (#472951). (clumens)- Make the installation key text more descriptive (#474375). (clumens)- Fix discovery of existing raid/lvm for ks install without clearpart (#503310, #503681) (rvykydal)- Use the F12 version of the bootloader command. (clumens)- It\'s /sbin/fsadm, not /sbin/e2fsadm (#504043). (clumens)- Remove the bootloader --lba32 option. (clumens)- Use gettext.ldngettext when necessary (#467603) (dcantrell)- Test NM_CONTROLLED setting correctly in network.py (#502466) (dcantrell)- Show unknown partitions as \"Unknown\" in partition editor. (dcantrell)- Add a type hint on popup windows (rstrode). (clumens)- Use the F12 version of the driverdisk command. (clumens)- Remove driverdisk --type, since mount can figure that out. (clumens)- Fix an error when editing an unreachable repo (#503454). (clumens)- If /etc/rpm/platform is found, move it out of the way. (clumens)- We no longer write out /etc/rpm/platform, so don\'t offer to upgrade it. (clumens)- Remove locals containing \"passphrase\" or \"password\" from exns (#503442). (clumens)- Make progress bars modal (#493263, #498553, rstrode). (clumens)- Make sure to import os.path if we are going to use it. (jgranado)- ipcalc is copied to /usr/lib. (jgranado)- Limit the trigger to block type devices. (jgranado)- We need ipcalc for new s390 installation script. (jgranado)- Fix off-by-one errors in read. (notting)- sysconfig file changed names for system-config-firewall (katzj)- Don\'t write out firewall settings if they already exist (#502479) (katzj)- Make sure that the devices are correctly detected (#491700) (jgranado)- Make the save-to-bugzilla dupe detection smarter. (clumens)- If network --device=MAC is given, translate to device name (#185522). (clumens)- Add a function to convert MAC addresses to device names. (clumens)- Move /boot checks from sanityCheck into Platform.checkBootRequest. (clumens)- Return translated strings from checkBootRequest. (clumens)- Check that /boot is on a Mac disk label for PPC installs (#497745). (clumens)- Call checkBootRequest from sanityCheck. (clumens)- Put some space in that big scary warning. (clumens)- fond -> found (clumens)- Use powers of two in swapSuggestion (#463885). (clumens)- Trim \"mapper/\" off device names in the bootloader UI (#501057). (clumens)- Make the weak password dialog comply with the HIG (#487435). (clumens)- Add a newline to a cmdline mode string (#497575). (clumens)
* Tue Jun 02 2009 Chris Lumens - 11.5.0.59-1- Do not show disabled repos such as rawhide during the install (#503798). (jkeating)
* Sun May 31 2009 David Lehman - 11.5.0.58-1- Pass --force to lvresize so it doesn\'t ask for confirmation. (dlehman)- Fix a typo in action sorting for resize actions (fs vs. device). (#501000) (dlehman)- Sending translation for French (mrtom)
* Thu May 28 2009 Chris Lumens - 11.5.0.57-1- Create and use unique ids for Device instances. (#500808) (dlehman)- Adjust remaining PartitionDevices\' names after removing a partition. (dlehman)
* Tue May 26 2009 Chris Lumens - 11.5.0.56-1- Ensure matching rootfs type to live type with autopart (#501876) (katzj)
* Tue May 26 2009 Chris Lumens - 11.5.0.55-1- Fix blank network device descriptions in the loader. (#501757) (notting)- Make sure the right _isMigratable gets used for Ext3FS (#501585). (clumens)
* Tue May 19 2009 Chris Lumens - 11.5.0.54-1- We are not guaranteed to have a partedDisk in the udev code (#501556, - The location of the options wiki page has changed. (clumens)- Disable BETANAG. (clumens)- Install a en_US.UTF-8 locale in the first stage image. (notting)- Reset font when changing language. (notting)- Set locale to en_US.UTF-8 when initializing the console. (notting)
* Mon May 18 2009 David Cantrell - 11.5.0.53-1- LVMVolumeGroupDevice stores pesize in MB, kickstart expects it in KB. (dlehman)- Don\'t schedule a format resize if reformat scheduled. (#500991) (dlehman)- Deactivate md arrays regardless of state if the device is present. (#496441) (dlehman)- Lame hack to make sure --size= is never 0 (#500905). (clumens)- Don\'t filter out partitions that haven\'t been allocated (#500932). (clumens)- Write out PE size as an integer, since that\'s what anaconda wants (#501049). (clumens)- Set clearPartType to None on preupgrade too (#499321). (clumens)- Fix indentation of line to remove cancelled actions from the list. (#500932) (dlehman)- Consider active-idle state of md device as accepatable status of device (#497407) (rvykydal)- Fix detection of cciss disks (#499408) (dchapman)- Get existing fs size for xfs. (dcantrell)- Get existing fs size for ntfs. (dcantrell)- Get existing fs size for jfs. (dcantrell)- Get existing fs size for ext2, ext3, and ext4. (dcantrell)- Compute existing filesystem size using fs info utility. (dcantrell)- Do not allow users to migrate ext4 to ext4. (dcantrell)- Correct handling of formats on encrypted preexisting LVs. (#499828) (dlehman)- Ignore unrecognized device-mapper devices we find. (#499967) (dlehman)- loader: Mount /tmp as tmpfs not ramfs so we can swap it out (ajax)- format.mountpoint -> lvd.mountpoint (#500913). (clumens)- Treat the loop labels as devices without a label.(#493219) (jgranado)- Add the partition table partition after initializing (#498602). (clumens)
* Wed May 13 2009 David Cantrell - 11.5.0.52-1- Add a Mac OS boot line to yaboot.conf (#499964). (clumens)- Catch IOError when enabling repos (#500439). (clumens)- Use a newer version of the kickstart Partition command. (clumens)- Fix a traceback when installing over previous installs on PPC (#499963). (clumens)- Fix a typo when probing exception disks. (clumens)- Add support for --noformat too. (clumens)- Add support for --onpart, --ondrive, and --useexisting. (clumens)- Make the storage.writeKS method useful and called from instdata (#493703). (clumens)- Add writeKS methods to the device objects. (clumens)- Add writeKS methods to all the format objects. (clumens)- upd-instroot: Add gdbserver (ajax)- Remove text-mode syslinux help (katzj)- If clearPartType is None, don\'t attempt to clear a device (#499321). (clumens)- Only set clearpart data if the command was provided in the kickstart file. (clumens)- Override previously defined mountpoints in kickstart (#499746). (clumens)- Yet another font package name has changed (#499322). (clumens)- Set new mountpoint correctly for existing encrypted LVs. (#496363) (dlehman)- Once a partition is part of another device it cannot be modified. (#496760) (dlehman)- Maintain request sort order by using req_disks instead of parents. (dlehman)- Do not set a parent on the /mnt/sysimage/dev bind mount object (#499724). (clumens)- Skip .pyc files in subdirectories when running make updates. (clumens)- Remove \'lowres\' option. (ajax)- Run tune2fs on newly formatted ext[34] filesystems. (#495476) (dlehman)
* Thu May 07 2009 David Cantrell - 11.5.0.51-1- Don\'t clear the first partition on any disk with a Mac disk label (#492154). (clumens)- Add detailedMessageWindow to the cmdline class (#499700). (clumens)- Don\'t traceback when a freespace partition is present (#499662). (clumens)- Do nomodeset when doing xdriver=vesa (ajax)- Fix calculation of smallest PV\'s size in the lvm dialog. (#493753) (dlehman)- Fix KeyError when partition numbers change during allocation. (#497911) (dlehman)- Update EFI CD booting code in mk-images (pjones)
* Wed May 06 2009 Chris Lumens - 11.5.0.50-1- Use storage objects throughout the partition editing UI code (#491806, - Verify filesystems after the live resize (katzj)- Verify with fsck after resizing filesystems (katzj)- IBM improvements to linuxrc.s390 (#475350) (dcantrell)- Write out correct hostname during LiveCD installs (#492515) (dcantrell)- Enter in hostname entry field advances to next screen (#494135) (dcantrell)- Check if we\'ll clear a partition after setting its format attr. (#499251) (dlehman)- Don\'t pass the default clearPartType value to the device tree. (dlehman)- Fix some logic errors in storage.partitioning.shouldClear. (dlehman)- Forward port various iscsi fixes from 5.4 iscsi work (hdegoede)- Avoid writing out NAME= in ifcfg files (#497485) (dcantrell)- Retry network configuration in loader (#492009) (dcantrell)- Make sure /boot ends up on the same disk as Apple Bootstrap (#497390). (clumens)- Handle that the default bootloader entry can sometimes be None (#496618). (clumens)- The PS3 bootloader allows booting from ext4 filesystems (#498539). (clumens)- Support LVM PE sizes > 128MB (#497733) (cristian.ciupitu)- Set ANACONDAVERSION on most livecd installs. (clumens)- getDependentDevices is in devicetree, not storage (#499144). (clumens)
* Mon May 04 2009 David Cantrell - 11.5.0.49-1- Collect network interfaces from NetworkManager (#493995) (dcantrell)- Handle fstab entries whose filesystem we don\'t recognize.(#498120) (dlehman)- Add an error signifying an unrecognized entry in /etc/fstab. (dlehman)- Don\'t drop discovered format with unknown devices when parsing fstab. (dlehman)- Fix display of paths for device-mapper device in bootloader widget. (dlehman)- Don\'t call udevDeviceFormat if we\'re just going to clear the device (#497323). (clumens)- Pass clearPartType to the devicetree as well. (clumens)- Break the complex should-clear logic out of clearPartitions. (clumens)- Handle clearpart in the early kickstart pass too. (clumens)- Correct setting the SELinux context on mountpoints (#494995). (clumens)- make resetFileContext return the context set (wwoods)- Allow editing of the hdiso source partition so it can be mounted (#498591). (clumens)- Add a ignoreProtected= parameter to deviceImmutable that does the obvious. (clumens)- Be more aggressive unmounting before install starts (#498260) (katzj)- Add %{?dist} to the release number in the spec file. (dcantrell)- Configure network in kickstartNetworkUp() iff NM is not connected (#490518) (dcantrell)- Don\'t segfault with \"ks someotherparam\" (#498307). (clumens)- Fix the arch upgrade check in yuminstall.py, too (#498280). (clumens)- Move _resetRpmDb into iutil so we can access it everywhere. (clumens)- Don\'t mount bind mounts last, that makes /dev break. (pjones)- Pass anaconda to storage.FSSet.turnOnSwap. (dlehman)- Ignore spurious formatting on partitioned devices. (dlehman)- Revert \"DeviceError only returns a message, not (message, device) tuple (#496343).\" (dlehman)- Fix action sorting for partitions on the same disk. (#498064) (dlehman)- Fix traceback in second editing of existing raid dev (#497234). (rvykydal)- Allow existing LVs with filesystems to be resized (#490913) (dcantrell)- Rate limit pulse() calls to ProgressWindow. (pjones)- Don\'t populate flags.cmdline with \"True\" values when no = is used. (pjones)- Add \"nomodeset\" to the list of command line arguments copied to grub.conf (pjones)- Use device.format.mountType insead of device.format.type for fstab. (pjones)- Initialize x86 class variables before efiBootloaderInfo.__init__() (pjones)- Fix a segfault on nfs+kickstart (pjones)- Fix an error when raising FormatCreateException. (clumens)- Add more windows to the rescue interface class (#498014). (clumens)- Remove requirement for EFI machines to be x86, since IA64 is too (#497934). (clumens)- Fix the kernel package selection on ppc64 machines (#497264). (clumens)- Include fsck.ext4 and mkfs.ext4 in the images (#497996). (clumens)- Properly restore SIGCHLD if X startup fails (wwoods)- Fix kickstart PV references handling for lvm on raid (#497352). (rvykydal)
* Fri Apr 24 2009 Chris Lumens - 11.5.0.48-1- Fix handling of swap files. (#496529) (dlehman)- Pass anaconda to turnOnSwap so we can use swap files. (dlehman)- Fix incorrect attribute name use for retrofit flag. (dlehman)- Use slightly better checks when testing for 0 size (#493656, #497186, - If the LV has no child, don\'t attempt to grab its format (#497239). (clumens)- Apply the global passphrase when doing kickstart autopart (#497533). (clumens)- Add support for encryption passphrase retrofits. (dlehman)- Bring luks_add_key and luks_remove_key back into devicelibs.crypto. (dlehman)- Don\'t let lvremove failures from incomplete vgs crash the install. (#497401) (dlehman)- Allow setting a mountpoint w/o formatting an encrypted partition. (#495417) (dlehman)- Remove encryption from preexisting device if \"Encrypt\" is deactivated. (dlehman)- Fix indentation of preexisting partition handling block. (dlehman)- The device passed to the luks passphrase dialogs is a string. (#492123) (dlehman)- Protect against tracebacks from the partition isFoo properties. (dlehman)- Fix handling of bind mounts. (#496406) (dlehman)- Add more filesystem checks. (clumens)- Support vfat filesystems in the partitioning UI (#496351). (clumens)- Remove devices in leaves first order (#496630) (hdegoede)- Don\'t remove an inconsistent lvm partition from the devicetree (#496638) (hdegoede)- Move isEfi to be a property on Platform instead of on X86 (#497394). (clumens)- Support --encrypted --useexisting on kickstart installs (#497147). (clumens)- When making a RAID device, require that some members be selected (#491932). (clumens)- When catching an OSError, handle it as an object instead of a tuple (#497374). (clumens)- Enforce the fstype that holds /boot on kickstart installs (#497238). (clumens)- Fix ps3 platform support (#497203) (katzj)- Clean up rpmdb locks at the end of the install (#496961) (katzj)- Don\'t allow /boot to be on an encrypted device (#496866). (clumens)- Use the correct unmount method (#496764). (clumens)
* Tue Apr 21 2009 David Cantrell - 11.5.0.47-1- Fix adding of fifth partition in UI (#496930). (rvykydal)- Define the fd variable before it can ever be referenced (#496930). (clumens)- Fix preservation of format attrs for preexisting luks partitions. (dlehman)- Set md member devices\' uuids after creating an array. (dlehman)- Don\'t try to get size for nodev and bind filesystems. (dlehman)- Include the device path in DeviceError exceptions. (dlehman)- Mdadm\'s incremental mode ignores the auto option, so don\'t use it. (dlehman)- Use incremental mode for all md member addition during probing. (dlehman)- Try to name existing md arrays based on their preferred minor. (dlehman)- Reimplement mdexamine using a more easily parseable output format. (dlehman)- Fix position of \"--run\" option to mdadm assemble. (dlehman)- Handle passphrase prompts without a traceback in cmdline mode. (#492123) (dlehman)- Fix another device vs. string problem in EFI bootloader config (#496669). (clumens)- Add the device\'s name to mdadm.conf (#496390). (clumens)- Show normal cursor during passphrase entry (#496534) (msivak)- Fix traceback in cmdline mode after exception handling cleanup (#496644) (katzj)- DeviceError only returns a message, not (message, device) tuple (#496343). (clumens)
* Fri Apr 17 2009 David Cantrell - 11.5.0.46-1- Clean up argument list after changing from rhpl to iutil for execWithRedirect (jkeating)- Fix NameError traceback setting up bootloader in EFI installs (wwoods)- No longer force ISOs to be on ext2, ext3, or vfat partitions. (clumens)- Sending translation for German (ckpinguin)- Split text mode exn saving into multiple screren (#469380). (clumens)- Copy /tmp/program.log to /mnt/sysimage/var/log/. (clumens)- Fix member preselection in raid UI. (rvykydal)- Fix editing of raid device (persistence of level choice) (#496159) (rvykydal)- Fix ks --useexisting and --noformat options of logvol and volgroup (rvykydal)- Make sure inconsistencies dont screw us up. (jgranado)- Re-implement the inconsistency functionality. (jgranado)- Allow the use of \"-\" in the lvm names. (495329) (jgranado)- Make sure we \"insist\" on mdadm commands. (491729) (jgranado)- [PATCH] Possible fix for some encryption related bugs during the Custom Layout editation (#495848) (msivak)
* Thu Apr 16 2009 Chris Lumens - 11.5.0.45-1- Touch /.autorelabel when running under rescue mode (#491747). (clumens)- Add support for fingerprint-based logins (#481273). (clumens)- Add a \"File Bug\" button to the catch-all partitioning exception handler. (clumens)- Remove the early catch-all exception handler (#495933). (clumens)- Implement the save to USB using devicetree devices. (jgranado)- Use size instead of currentSize when comparing lv sizes (hdegoede)- Make sure all pv\'s of an lv\'s vg are setup before resizing an lv (hdegoede)- Do not try to teardown a non existing format (hdegoede)- Center the bootloader configuration dialog (#495802). (clumens)- Destroy (potential) stale metadata when creating a new partition (hdegoede)- use partition req_base_size instead of size in partitionCompare() (hdegoede)- Fix changing size of newly created partitions (hdegoede)- Don\'t traceback on invalid filesystem detection (#495156) (dcantrell)- Check to see if formatcb is None. (jgranado)- Use the PV name when logging error messages. (jgranado)- Don\'t set up the device to obtain minSize anymore. (dlehman)- Improve estimate of md arrays\' size. (dlehman)- Determine minimum size for filesystems once, from constructor. (dlehman)- Fix estimate of LUKS header size for newly encrypted devices. (#493575) (dlehman)- Fix two syntax problems with generated mdadm.conf entries. (#495552) (dlehman)- Default to AES-XTS cipher mode with 512 bit key for new LUKS devices. (dlehman)- When going back from a failed shrink, reset the device action set. (clumens)- If we can\'t communicate while logging in to bugzilla, error (#492470). (clumens)- Make save to usb work. (jgranado)- We don\'t always have a formatcb either (#495665). (clumens)- The entry is named lvsizeentry now. (jgranado)
* Mon Apr 13 2009 David Cantrell - 11.5.0.44-1- Default to SHA512 password encoding algorithm. (dcantrell)- Handle format combo box not existing (#495288) (dcantrell)
* Mon Apr 13 2009 Chris Lumens - 11.5.0.43-1- Run programs with LC_ALL=C in case we\'re parsing output (#492549). (clumens)- A volume group device has a \"peSize\" attribute (not \"pesize\"). (dlehman)- Remove uncommitted new lv from dict on cancel. (dlehman)- Use the correct value when setting new extent size. (#493753) (dlehman)- Fix image generation so all ELF binaries have their deps included (#495231). (clumens)- Clean up the code in editLogicalVolume function. (jgranado)- Setup the disks before partitioning as the nodes are needed. (jgranado)- Rescan the devices when we are saving a traceback. (jgranado)- Close file descriptors when an error occurs. (jgranado)- Aesthetic changes to \"editLogicalVolume\" function. (jgranado)- When deallocating a partition also set its disk attribute to None (hdegoede)- Check self.partedPartition not being None before using it (#495077) (hdegoede)- growPartitions: Change op_func (back to) add when an iteration succeeds (hdegoede)- partedPartition can be None while growing partitions (#495076) (hdegoede)
* Thu Apr 09 2009 Chris Lumens - 11.5.0.42-1- Fix display of format type for devices. (dlehman)- Fix handling of priority option from swap fstab entries. (#494992) (dlehman)- Some fs types cannot be passed to programs (#495061, #493075). (clumens)- When a new module is loaded, update the kernel_filesystems list. (clumens)- Add more Indic fonts (#494261, pnemade).- Remove the message saying you can make your own layout (#495015). (clumens)- Put e100 (and other) firmware in its own directory if needed (#494778). (clumens)- Run /bin/umount instead of calling umount(2) in _isys.umount (#493333) (dcantrell)- Add doPwUmount() and mountCommandWrapper() to isys (#493333) (dcantrell)- Preserve symlinks and only collect deps on ELF executables. (dcantrell)- Use $(ARCHIVE_TAG) throughout the updates target. (dcantrell)- partedUtils doesn\'t exist anymore (katzj)- Revert \"Show the header in certain non-lowres cases\" (#493153) (katzj)- Pre-existing partitions names may change (#494833) (hdegoede)- Use getDeviceNodeName() instead of basename of device node. (hdegoede)- Fix ks raid --useexisting and --noformat (rvykydal)- Fix processing of --level and --device options of ks raid commands. (rvykydal)- Don\'t start pdb immediately in debug mode (katzj)- Fix EDD BIOS disk order detection in general and make it work with dmraid (hdegoede)- Update extended partition geometry when we change it (hdegoede)
* Tue Apr 07 2009 David Cantrell - 11.5.0.41-1- Make sure we have a clean lvm ignore list when we initialize. (jgranado)- We need to search by name without the \"mapper\" prefix. (jgranado)- Create a min_max constraint to avoid alignments issues. (jgranado)- Don\'t exit the installer from filesystem errors. (dlehman)- Try not to raise exceptions from minSize calculators. (dlehman)- Don\'t traceback when PVs are encrypted or are not partitions. (dlehman)- Adjust device dependencies when backing out device encryption. (#493257) (dlehman)- Include filesystem type in mount log message. (dlehman)- Load filesystem modules on demand (#490795, #494108). (clumens)- Use existing partitions when --onpart is used for PVs or raid members (#493065) (rvykydal)- Raise message, not exception when size set in LV dialog is too big. (rvykydal)- Raise an error when remofing an extended part with logical parts. (jgranado)- Esthetic changes to storage/partitioning.py. (jgranado)- dmraid.py is no longer being used by anything, so remove it. (clumens)- Remove partedUtils.py. (clumens)- This is the only place isEfiSystemPartition is used, so pull it in. (clumens)- getReleaseString now lives in the storage module. (clumens)- Stop lying about our support for dmraid and multipath in kickstart. (clumens)- Remove some old, unused code that also uses biosGeometry. (clumens)- For very small disks, don\'t try to display a stripe in the graph (#480484). (clumens)- Fix reading the console= parameter from the cmdline (#490731). (clumens)- For dmraid partititons device node name != name (hdegoede)- When a partition request gets unallocated, set the name back to req# (hdegoede)- Do not use getPartitionByPath() in allocatePartitions() (hdegoede)- Remove no longer used iscsi_get_node_record function (hdegoede)- Try to handle devices which live in a subdir of /dev properly (hdegoede)- Split DeviceTree.addUdevDevice into several smaller methods. (dlehman)- Don\'t traceback from failure finding minimum fs size. (#494070) (dlehman)- udev_settle after format teardown to avoid EBUSY on device teardown. (#492670) (dlehman)- Add a parted.Device attribute to all existing StorageDevices. (dlehman)- If no partitioning commands are given, apply the UI selections (#490880). (clumens)- Update font package names for ml_IN, si_LK, etc. (#493792, #493794). (clumens)- Fix a typo in the city name for Nepali (#493803). (clumens)- Fix writing out the partition= line on PPC (#492732). (clumens)- Do not check size when adding LV to growing VG (bug #492264) (rvykydal)
* Thu Apr 02 2009 David Cantrell - 11.5.0.40-1- Don\'t let device names affect action order in general case. (dlehman)- Round up when aligning to pesize for space used. (#493656) (dlehman)- Improve handling for various nodev filesystems in fstab. (#493685, - Present the correct max lv size in the dialog. (dlehman)- Use the head of the current branch, not master, for scratch archives. (dlehman)- Make a top level StorageError that all others are based on. (dlehman)- Remove unused PRePDevice class. (dlehman)- Make the disk model an attribute of DiskDevice. (dlehman)- Handle format actions in cancelAction() (dcantrell)- Fix format check box for pre-existing partitions (#491675) (dcantrell)- Remove temporary directory used in _getExistingSize() (dcantrell)- Activate storage before looking up the hdiso source drive (#491781). (clumens)- Remove isys.getDeviceByToken since it is no longer used. (clumens)- Don\'t allow the rootfs on live installs to not match (#493206, #492727) (katzj)- Create setup and teardown functs for dmraid devs. (jgranado)- put xfs back where it belongs (sandeen)- Fix up the other caller of unmountCD to pass in a device (#493537). (clumens)
* Wed Apr 01 2009 Chris Lumens - 11.5.0.39-1- Prevent sensitive information in kickstart files from ending up in tracebacks. (clumens)- It\'s 2009, let\'s ignore floppy drives now (#493338, #493377). (clumens)- Remove DmRaidArrayDevice level attribute (#493293) (hdegoede)- get_containing_device takes two arguments (#493266). (clumens)- Fix the check for if there\'s enough space available on / and /usr (#492614). (clumens)- Fix testing if a PPC partition is bootable (#492726). (clumens)- Look for a PReP \"partition\" by examining the format, not the flags (#492426). (clumens)- Fix a few more pylint warnings and errors in storage/
* (hdegoede)- Fix some pylint warnings in iw/
*.py (hdegoede)- Don\'t start our audit daemon with the livecd installer (katzj)- If there\'s a problem finding removable disks, disable save-to-disk. (clumens)- Move %pre processing to much earlier in the install process. (clumens)- If there are no installs to rescue via kickstart, display an error. (clumens)- Add an early kickstart processing pass. (clumens)- Fixes of errors shown by pylint that didn\'t get into the beta build. (mgracik)- Adjust the dmraid ignoring logic. (jgranado)- Reference the format by type, not name.(#492596) (jgranado)- Sending translation for Chinese (Simplified) (leahliu)- Increase udev_settle timeout in udev_get_block_devices. (#492049) (dlehman)- Fix check for fully defined md array when raidlevel is 0. (#491796) (dlehman)- Fix a typo (\'isEFI\' should be \'isEfi\'). (dlehman)- Make sure the pvs are set up before doing lvremove or vgremove. (dlehman)- Don\'t write out md member devices to a config file for assemble. (dlehman)- Fix the supported property of filesystems and prepboot format. (dlehman)- Return early from doAutoPartition if partition allocation fails. (dlehman)- Reset storage instance if autopart fails. (#492158) (dlehman)- Assign weights to partition requests when doing manual or kickstart installs. (clumens)- Refresh windows immediately to make sure they appear. (clumens)- Fix problem with format and migrate combo box activation. (dcantrell)- Fix typo in upgrade.py (dcantrell)- Move _scheduleLVs and growLVM calls to be inside try/except (dcantrell)- Correct bounds checking problems in \'Shrink current system\' (dcantrell)- Require libselinux-python (#489107) (dcantrell)- Do not prompt for NIC selection in cmdline mode (#492586) (dcantrell)- Do not write /etc/hosts since setup owns that now (#491808) (dcantrell)- Remove unused self._resize variable. (dcantrell)- Having 2 raidsets in the same group of devs is possible. (jgranado)- getDevice returns a string. Use that to look up the device object (#492465). (clumens)- Take into account i386->i586 when warning on upgrade arch mismatch. (clumens)- Remove unused getVG{Free,Used}Space methods. (clumens)- We can no longer display Russian correctly in text mode (#491394). (clumens)- Clean up the reinitialize LVM warning message (#491888). (clumens)- Update translation files (#484784). (clumens)- Include the storage directory when building the .po files. (clumens)- Merge commit \'origin/anaconda-storage-branch\' (clumens)- Keep VG size property non-negative (rvykydal)- Grow LVs for kickstart requests too (rvykydal)- Handle not finding the upgrade root gracefully. (jgranado)- Use self.name to report that we could not eject cd. (jgranado)- Fix ppoll() timeout=infinity usage in auditd (#484721). (pjones)- Use correct parse method for the upgrade command (#471232) (wwoods)- Rename /etc/modprobe.d/anaconda to /etc/modprobe.d/anaconda.conf (clumens)- Handle FTP servers that both want and don\'t want PASS after USER (#490350). (clumens)- Only select the Core group in text mode (#488754). (clumens)- Add created user to default group created for the user. (rvykydal)
* Wed Mar 25 2009 Chris Lumens - 11.5.0.38-1- Fix pylint errors in iw/
*.py (hdegoede)- Rework CryptTab.parse (dlehman).- Code fixes of errors shown by pylint (mgracik).- Don\'t underflow on the busy cursor stack. (clumens)- \"vg\" is not valide inside this if. (jgranado)- Device is sometimes None. (jgranado)- Fix typo. (#492042) (dlehman)
* Tue Mar 24 2009 David Cantrell - 11.5.0.37-1- Start with a basic /etc/hosts file (#491634) (dcantrell)- Do not flag every existing partition for resize (#491803) (dcantrell)- Remove unused noformatCB() function. (dcantrell)- Remove unnecessary istruefalse() function. (dcantrell)- Build new _isys.so for updates.img if needed. (dcantrell)- Get the UUID of each md array we create. (#491796) (dlehman)- Call udev_settle after committing changes to a disk (#491529) (hdegoede)- Be a little bit smarter about allocating space to grow parts. (#491761) (dlehman)- Check that partition is on the disk before trying to remove it. (#491997) (dlehman)- Work around a bug in mdadm incremental assembly. (dlehman)- Use the same units (MB) for extent size that we do for everything else. (dlehman)- Put line breaks in between crypttab entries. (#491938) (dlehman)- Register the NoDevFS class. (clumens)- fslabels -> labels. (clumens)- NFSDevice does not take exists= as a parameter. (clumens)- Override _setDevice and _getDevice in NFS. (clumens)- Move resolveDevice into the DeviceTree class. (clumens)- Move most of the parseFSTab logic into its own function. (clumens)- We don\'t even use partedUtils in this module. (clumens)- PReP formats can never be active. (#491865) (dlehman)- Move protectedPartition setup into storageInitialize (#491781). (clumens)- Use the mount and unmount methods on OpticalDevice.format now. (clumens)- Add a format for ISO9660 filesystems. (clumens)- getDeviceByName does not expect the CD device to start with \"/dev/\" (#491768). (clumens)- Write the same arch to .discinfo as iutil.getArch() gives us (#490977). (clumens)- Don\'t remove partitions twice. (jgranado)
* Mon Mar 23 2009 David Cantrell - 11.5.0.36-1- Add EFI, Apple Bootstrap, and PPC PReP Boot formats. (dlehman)- Remove all implicit calls to self.format.destroy from Device classes. (dlehman)- Pop the busy cursor when we\'re done with the wait window (#491736). (clumens)- If the new size and old size are the same, treat as a no-op (#491496). (clumens)- Let mountFilesystems handling bind mounting /dev (#490772). (clumens)- Not all FileDevices have parents, so don\'t assume. (clumens)- Bind mount formats are mountable. (clumens)- If a filesystem is already mounted, don\'t raise an error. (clumens)- Fix a typo calling the superclass\'s constructor. (clumens)- Add a fake device for bind mounting /dev. (clumens)- If there was an exception leading to the urlgrabber error, log it. (clumens)- Fix the import of checkbootloader (#491574). (clumens)- Add a missing import (#491605). (clumens)
* Fri Mar 20 2009 David Cantrell - 11.5.0.35-1- Fix traceback in FSSet.crypttab. (#491160) (dlehman)- Fix traceback on upgrade. (#491446) (dlehman)- Do not include .h and .sh files in updates.img (dcantrell)- Make PartitionDevice resize work. (dcantrell)- Reset mouse pointer if we find an unreadable disk. (dcantrell)- Use label attr instead of non-existent fslabel attr. (#491120) (dlehman)- Need to notify the kernel of changes before udev settle (katzj)- Revert \"mount and umount commands are in /sbin now, remove from /usr/sbin\" (dcantrell)- Make some fixes to the rescue mode system selection UI (#489973, #489977). (clumens)- Fix text mode autopartitioning (#491282). (clumens)- Do not use _rnetdev as fstab option for network based / (hdegoede)- Make root= line in grub.conf and path spec in fstab consistent (hdegoede)- Fix a reference to the partitions list (#491335). (clumens)- Do not traceback at the very beginning of rescue mode (msivak)- Fix traceback when editing encrypted mdraid device in UI. (rvykydal)
* Thu Mar 19 2009 David Cantrell - 11.5.0.34-1- Catch FSError when detecting storage, prevent user from continuing. (dcantrell)- If we have no error string, place None in the tuple. (dcantrell)- Move OUTPUT_TERMINAL definition to isys.h (dcantrell)- mount and umount commands are in /sbin now, remove from /usr/sbin (dcantrell)- Avoid SIGSEGV in doPwMount() when NULL is last parameter (#491192) (dcantrell)- Attempt disk commits 5 times before raising an exception. (dcantrell)- Add boot partition size limit properties and size validation method. (dlehman)- Make sure boot flag gets set. (#491170) (dlehman)- Make bootable a property of PartitionDevice. (dlehman)- After setting up our random UUID, inform the storage layer (katzj)- Handle system crappyness. (jgranado)- Fix up checking for live image backing (katzj)- Let\'s not remove our mountpoints (katzj)- Fix writing the default= line in grub.conf (#490756). (clumens)- Revert \"Fix pruning of destroy actions for preexisting devices.\" (dlehman)- Add more blacklisting (katzj)- Blacklist the live image backing device (katzj)- Move blockdev blacklisting to be a function (katzj)- Inhibit devkit-disks during a live install (katzj)- try to unmount everything from /media on live installs (katzj)- Fix live installs to not traceback (katzj)- Fix New partition in UI (rvykydal)
* Thu Mar 19 2009 David Lehman - 11.5.0.33-1- Rework the lvm dialog. (#490301,#490966,#490681,#489870) (dlehman)- Improve chances of uniqueness from Storage.createSuggestedLVName. (dlehman)- Fix pruning of destroy actions for preexisting devices. (dlehman)- Devices should not be resizable unless they exist. (dlehman)- Try to activate an existing md array after adding each member. (dlehman)- Indicate filesystem is mountable if we have a mount command. (dcantrell)- Mount existing filesystems read-only when getting size. (dcantrell)- Fix some errors in the updates target. (dcantrell)- Place all mount.
* commands in /sbin (dcantrell)- Fix error message reading and writing in doPwMount() (dcantrell)- Use booleans in isys.mount() and isys.umount() (dcantrell)- Add a FIXME comment for setting uuid in VG / LV create (hdegoede)- Do not traceback when writing anaconda.ks with iscsi with auth info. (hdegoede)- Do not write LV uuid to grub.conf, but the filesystem uuid (hdegoede)- If a mountpoint depends on a network disk at _netdev to its fstab options (hdegoede)- Do not hang when creating raid array with member having filesystem detected (#490891) (rvykydal)- Destroy and create luks child of raid array too when editing in UI. (rvykydal)- Editing non-existent raid device by destroying and creating actions (rvykydal)- actionDestroyFormat call takes device, not format (rvykydal)- Fix getChildren call in partition UI (rvykydal)- Fix removing of devices with the same name from tree when adding create action. (rvykydal)- Do not duplicate requested minor number in edit raid UI list. (rvykydal)- Offer available partitions when editing non-preexisting raid request. (rvykydal)- Don\'t try to fit the whole StorageDevice.__str__ output into the UI (#490406). (clumens)- Make PartitionDevice handle both normal and dmraid partitions (hdegoede)- Stop overriding __init__ in DMRaidPartitionDevice (hdegoede)- Set format UUID after creating a format (hdegoede)- Fix result of updateSysfsPath to be consistent with initial sysfsPath values (hdegoede)- Use getDevicesByInstance() for storage.partitions (hdegoede)- We no longer use iscsiadm anywhere (hdegoede)
* Tue Mar 17 2009 Jesse Keating - 11.5.0.32-1- Typo fix. (clumens)- Make platform.checkBootRequest work better and not use diskset anymore. (clumens)- Fix a traceback when looking for PS3 boot partitions (#490738). (clumens)- FormatArgs -> FormatOptions (#490737). (clumens)- Fix ppoll() timeout=infinity usage in auditd (#484721). (pjones)- Simplify kernel package selection. (clumens)- Look at CPU flags instead of /proc/iomem to determine PAE-ness (#484941). (clumens)- Tell NM not to touch interfaces when / is on a network disk (hdegoede)- Get iscsi going with the new storage code (hdegoede)- Use minihal instead of isys.hardDriveDict in list-harddrives (#488122). (clumens)- storage.disks never includes disks without media present. (clumens)- Changed the getDevicebyLabel() to getDeviceByLabel() in devicetree.py (mgracik)
* Mon Mar 16 2009 David Cantrell - 11.5.0.31-1- Don\'t use disk.maximizePartition anymore. (dlehman)- Only schedule implicit format destruction if there is formatting to destroy. (dlehman)- Reset encryptionPassphrase when we reset the rest of storage. (dlehman)- Do not create a LUKSDevice if we do not have a way to map the device. (dlehman)- Fix handling of new extended partitions during partition allocation. (dlehman)- Fix bug in dependency list for partitions. (dlehman)- Fix inconsistency in variable use in search for free space. (dlehman)- Check for disk name being in disk.name not in clearPartDisks (dcantrell)- Create a Makefile target to generate updates.img automatically. (dcantrell)- When creating free space, handle cases other than clearpart --drives= (clumens)- Ignore loop and ram devices (hdegoede)- devicetree: fix slave addition of incomplete dm / md devices (hdegoede)- Catch LVMErrors too when tearing down devices (hdegoede)- Install udev rules in /lib/udev/rules.d instead of in runtime dir (hdegoede)- Ignore disk devices with missing media (#488800). (clumens)- Use correct parse method for the upgrade command (#471232) (wwoods)- Fix creation of fs options for preexisting encrypted devices. (dlehman)- Fix lots of buggy behavior in the partition dialog. (dlehman)- Handle FTP servers that both want and don\'t want PASS after USER (#490350). (clumens)- Fixed the names of the variables for lvm.py functions. (mgracik)- editPartitionRequest -> editPartition in iw/partition_gui.py (#490384). (clumens)- clampPVSize -> clampSize in lvm.py (#490295). (clumens)- Fix the obvious and stupid typo (#490296). (clumens)- isys.umount removes mount directory by default (rvykydal)- Fix tempfile.mkdtemp call. (rvykydal)- Initialize attribute _mountpoint before using it (rvykydal)- devicetree.py has _ignoredDisks instead of ignoredDisks. (jgranado)- Create separate resize actions for formats and devices. (dcantrell)- Use os.statvfs() to get existing filesystem size. (dcantrell)- Add resizeArgs for Ext2FS and fix it for BtrFS. (dcantrell)- Report when we cannot find any free space partitions. (dcantrell)- Improve resizeDialog text. (dcantrell)- Raise FSResizeError if filesystem cannot be resized. (dcantrell)- Handle resizing when setting targetSize for PartitionDevice (dcantrell)- Let users set the size property of StorageDevices. (dcantrell)- Add support for kickstart\'s \'--initlabel\' option to clearpart. (dlehman)- Fix display of LV format type for encrypted LVs. (dlehman)- Make paths somewhat flexible so we\'ll work in normal environments. (dlehman)
* Fri Mar 13 2009 David Lehman - 11.5.0.30-1- Fix supportable attribute for cmdline-enabled fstypes. (dlehman)- Access private attribute for luks dict. (dlehman)- Schedule format create for newly encrypted preexisting partition. (dlehman)- Don\'t traceback if vg.teardown fails in recursive teardown. (dlehman)- Schedule format create action for newly encrypted preexisting LV. (dlehman)- Make sure we return something other than None for new requests. (dlehman)- Add __str__ methods to Device objects. (clumens)- Add mediaPresent and eject to the OpticalDevice class. (clumens)- Use the right import path for checkbootloader (#490049). (clumens)- Rename /etc/modprobe.d/anaconda to /etc/modprobe.d/anaconda.conf (clumens)- Don\'t clear partitions containing the install media. (dlehman)- Wait til everyone knows the format/fs is no longer active. (dlehman)- Save a copy of the device stack so we can destroy the format. (#489975) (dlehman)- Add a deep copy method to Device since we can\'t just use copy.deepcopy. (dlehman)- Fix infinite loops in partition screen populate. (#490051) (dlehman)- Default to a name based on the uuid for existing luks mappings. (dlehman)- Use the correct keyword for luks map names (\'name\', not \'mapName\'). (dlehman)- Fix getting of number of total devices of sw raid. (rvykydal)- Only select the Core group in text mode (#488754). (clumens)- Added test case for devicelib mdraid.py. (mgracik)- Add created user to default group created for the user. (rvykydal)- Fix editing of existing logical volume. (rvykydal)- Add a list that lvm should ignore. (jgranado)
* Thu Mar 12 2009 David Lehman - 11.5.0.29-1- Don\'t create a PartitionDevice for devices that do not exist (#489122). (clumens)- A getter doesn\'t usually take a parameter (#489965). (clumens)- Do not write \"Running...\" to stdout, as that could be tty1. (clumens)- Call storage.exceptionDisks, not diskset.exceptionDisks. (#489615) (dlehman)- Fix typo. (jgranado)- Fix typo. (dlehman)- Add udev rules for handling for mdraid arrays. (dlehman)- Honor the zerombr kickstart directive. (dlehman)- currentSize is expected to be a float, so convert it to one (#489882). (clumens)- It\'s clearPartDisks, not clearPartDrives. (clumens)- Get rid of the mappings and ksID as well. (clumens)- Make sure the device has a diskType before attempting to check what it is. (clumens)- Update the volgroup command to work with the new storage code. (clumens)- Update the raid command to work with the new storage code. (clumens)- Update the part command to work with the new storage code. (clumens)- Update the logvol command to work with the new storage code. (clumens)- addPartRequest is no longer needed. (clumens)- Don\'t set default partitioning in every kickstart case. (clumens)- Clear partitions before scheduling requests. (clumens)- Always go through doAutoPart. (clumens)- Format modules import fix (mgracik)- Fixed the format modules import (mgracik)- Allow overriding the anaconda udev rules from an updates.img (hdegoede)- If a pv somehow does not contain a vg_name, do not try to get other vg info (hdegoede)
* Wed Mar 11 2009 David Cantrell - 11.5.0.28-1- Fix a few bugs in the lvm dialog. (#489022) (dlehman)- Modify livecd.py to work with new storage backend. (dlehman)- Be explicit about resetting Disks\' partedDisk attribute. (#489678) (dlehman)- Deactivate devices after we\'ve finished scanning them. (dlehman)- Handle the case of removing an unallocated partition from the tree. (dlehman)- Try again to set up LVs when we\'ve just added a new PV to the VG. (dlehman)- Set partition flags in format create/destroy execute methods. (dlehman)- Make sure we use the newly committed parted.Partition after create. (dlehman)- Make device teardown methods more resilient. (dlehman)- Initialize storage in rescue mode so we can find roots (#488984). (clumens)- We also need to pack up the extra args tuple, too. (clumens)- doLoggingSetup keeps growing new arguments, so put them into a dict (#489709). (clumens)- Fix anaconda udev rules to not require pre-existing device nodes (hdegoede)- Hook up \'Shrink current system\' dialog to new storage code. (dcantrell)- Fix _getCheckArgs() in class FS. (dcantrell)
* Tue Mar 10 2009 David Cantrell - 11.5.0.27-1- Fix action pruning to handle more complex scenarios. (dlehman)- Schedule destruction of any existing formatting along with the device. (dlehman)- Add a size attribute to mdraid arrays. (dlehman)- Speed up partitioning screen redraws by trimming workload where possible. (dlehman)- Create partitions with exactly the geometry we calculate. (dlehman)- Fix name collision between formats.mdraid and devicelibs.mdraid. (dlehman)- Destruction of the member device formatting will be handled elsewhere. (dlehman)- Fix a typo (jkeating)- Fix pruning between two destroy actions on the same device (rvykydal)- Use the pyblock functions when possible. (jgranado)- We are searching a list, not a dict now (rvykydal)
* Mon Mar 09 2009 David Cantrell - 11.5.0.26-1- Move the recursive teardown of all devices out of processActions. (dlehman)- Clean up handling of /proc, /sys, /dev/pts, /dev/shm entries. (dlehman)- Fix several minor bugs preventing upgrade/rescue mount. (#488946) (dlehman)- Only populate the device tree on demand. (dlehman)- Prune actions by device based on path, not object-id. (dlehman)- Rewrite action sort so it works correctly. (dlehman)- Do a separate disk.commit for each partition add/remove. (dlehman)- Fix bug keeping track of best free region/type/disk info. (dlehman)- Return early if doAutoPart is False, but clearpart first if kickstart. (dlehman)- Recognize PS3 as a valid machine type (#489263). (clumens)- Move the mdRaidBootArches logic into the platform module. (clumens)- stdout and stderr may also need to be created. (clumens)- Fix booty for dmraid (hdegoede)- It\'s self.origrequest, not self.origreqest (#489036). (clumens)- Added crypto.py unittest; Updated devicelibs tests baseclass.py and lvm.py (mgracik)- Start storage before parsing the kickstart file. (clumens)- Make sure autopart without any clearpart command will fail. (clumens)- Update storage flag on ks autopart (rvykydal)- Use correct storage attribute for ks clearpart (rvykydal)- Catch the new _ped.DiskLabelException for unrecognized disklabels. (dlehman)- Catch all failures from making parted objects in exceptionDisks. (dlehman)- various dmraid fixes. (jgranado)- Implement the format disk question as a callback. (jgranado)- Add dmraid functionality to new storage code. (jgranado)- Do not pass None values into nonmandatory arguments, you are screwing the default values.. (msivak)
* Thu Mar 05 2009 David Cantrell - 11.5.0.25-1- Schedule device destroy actions for partitions last. (dlehman)- Pass storage.disks, not storage, to createAllowed.... (#488860) (dlehman)- Nodev filesystems always exist. And the device is arbitrary. (dlehman)- Include proc, &c filesystems in fstab and FSSet.{mount/umount}Filesystems. (dlehman)- Remove FSSet.writeFSTab. That job is handled elsewhere. (dlehman)- Add properties to FSSet to provide the nodev entries. (dlehman)- Fix incomplete format in Storage.deviceImmutable. (dlehman)- Make sure we use the same disk the free space is on. (#488807) (dlehman)- Prevent clobbering of name \'mdraid\' by qualifying it. (dlehman)- Handle unformatted disks and cdroms in Storage.exceptionDisks. (dlehman)- Add resizeArgs property for resizable filesystems. (dcantrell)- Fill out class NTFS a bit more. (dcantrell)- Add fsckProg property to class FS. (dcantrell)- Ext2FS.migratable(self) -> Ext2FS.migratable (dcantrell)- Fix StorageDevice.minSize() and PartitionDevice.maxSize() (dcantrell)- Center resize window on the screen. (dcantrell)- Do not raise DeviceError if not bootable device is found. (dcantrell)- Do an even more thorough job of ignoring disks libparted doesn\'t like. (clumens)- Fix a couple problems on the \"Change device\" bootloader dialog. (clumens)- Fix a typo when writing out the mdadm config file. (clumens)- Remove all uses of isys.cdromList, which no longer exists. (clumens)- Check to see if we\'re on S390 on the congrats screen (#488747). (clumens)- Handle non-fatal errors more gracefully in addUdevDevice. (dlehman)- partRequests no longer exists, so don\'t try to import it (#488743). (clumens)- When building the exceptionDisks list, skip devices libparted doesn\'t like. (clumens)- Iterate over devicetree.devices.values, not devicetree. (dlehman)- Add a get() method to Flags, since it pretends to be a dictionary. (clumens)- Stop with the fsset usage. (dlehman)- Format message string after translation not before (msivak)- We need newer python-cryptsetup because of the default values for cipher and keysize for luskFormat (msivak)- If a drive is not initialized, offer reinitialization or ignoring the drive to the user (msivak)- More syntax errors / traceback fixes (hdegoede)- Fix syntax errors (rvykydal)- Implement Storage.sanityCheck, mostly from old partitions code. (dlehman)
* Thu Mar 05 2009 Dave Lehman - 11.5.0.24-3- Fix booty\'s desire to import fsset.- Fix attempt to set read-only attr \"removable\" in DiskDevice.__init__
* Thu Mar 05 2009 Peter Jones - 11.5.0.24-2- Add EFI boot.iso generation.
* Wed Mar 04 2009 Dave Lehman - 11.5.0.24-1- Storage test day.
* Fri Feb 20 2009 David Cantrell - 11.5.0.23-1- Remove old content from utils/ (dcantrell)- Ensure request.drive is always a list (#485622) (dcantrell)- Pick up pyblock if it exists in block/ on an updates.img. (dcantrell)- Don\'t check for a swapfs on things that aren\'t partitions (#485977). (clumens)- Perform ext3->ext4 filesystem migration if ext4migrate is given (#484330). (clumens)- Translate i?86 into i386 as a base arch. (jkeating)- Teach upd-instroot about i586 arch, for sake of glibc.i586/openssl.i586 (jkeating)- Fix the obvious typo. (clumens)- filer.login raises an exception with it can\'t login, not returns None (#486454). (clumens)- Take into account that a parted.Partition\'s _fileSystem can be None (#485644). (clumens)
* Thu Feb 19 2009 Chris Lumens - 11.5.0.22-1- Updated Romanian translation (alexxed)- Remove the qla2xxx line from mk-images again (wwoods).- Fix broken shell syntax from 3bdcd64d2 (jkeating)- The VLGothic-fonts package has changed name and location (#486080). (clumens)
* Tue Feb 17 2009 David Cantrell - 11.5.0.21-1- Building for i586 only now in Fedora. (dcantrell)
* Tue Feb 17 2009 David Cantrell - 11.5.0.20-1- Fix indentation on upd-instroot (kanarip)- Fix the indentation in mk-images (kanarip)- Remove unused iface_netmask2prefix() function. (dcantrell)- A parted.Disk has no attribute named \"dev\". It\'s named \"device\" (#486007). (clumens)- Use brandpkgname for the efi art too (katzj)- Let\'s use the product string for a brandpackage name. (kanarip)- Fix indentation in mk-images.efi (kanarip)- Fix indentation in buildinstall script (kanarip)- It\'s part.active, not part.is_active(). (clumens)- File the basic traceback as the first comment instead of a generic message. (clumens)- Encode our upgrade policy in productMatches/versionMatches and enforce it. (clumens)- If we\'d show package selection on kickstart installs, also show tasksel. (clumens)
* Fri Feb 13 2009 Chris Lumens - 11.5.0.19-1- Fix build errors in the new net.c code. (clumens)
* Fri Feb 13 2009 Chris Lumens - 11.5.0.18-1- Require pyparted >= 2.0.0 (dcantrell)- Update to use the new pyparted. (dcantrell, clumens)- Replace non UTF-8 char for hiding password chars with UTF-8 (#485218) (hdegoede)- Use a better test for when we\'re in text mode (#484881). (clumens)- Add iBFT support to loader (msivak)- Hardlink the initrd.img since we\'re linking the vmlinuz as well. (jkeating)- Check if ld-linux.so.2 is a link already, before removing it (dcantrell)
* Wed Feb 11 2009 Hans de Goede - 11.5.0.17-1- Revert broken German translation fixes so that we will build again- Sync up module list (#484984) (katzj)
* Wed Feb 11 2009 Hans de Goede - 11.5.0.16-1- Rewrite iscsi support using libiscsi (hdegoede)
* Mon Feb 09 2009 David Cantrell - 11.5.0.15-1- Fix gptsync/lib.c for gcc strict aliasing rules. (dcantrell)- Fix gcc warning for gptsync memset() usage. (dcantrell)
* Mon Feb 09 2009 David Cantrell - 11.5.0.14-1- Rewrite mdio_read() in linkdetect.c for strict aliasing rules. (dcantrell)
* Mon Feb 09 2009 Chris Lumens - 11.5.0.13-1- Check that required kickstart commands are present early on (#483048). (clumens)- Simplify the text mode interface. (clumens)- Fix truncated translation string for livecd installs (#484430). (clumens)- Calcutta -> Kolkata (#484638). (clumens)- Fix runpychecker.sh to find zonetab module (hdegoede)- Strip invalid characters from automatically made VG/LV names (#483571). (clumens)- Fix systemtime setting during installation (#6175, #461526). (rvykydal)- Workaround MMC block devs showing up not as disks from hal (#481431) (katzj)- Add some new false positives to pychecker false positives filtering (hdegoede)- Make kickstart timezone value check consistent with system-config-date (#483094) (rvykydal)- Make ext4 default in UI filesystem selection (bug #481112) (rvykydal)- Redirect iscsiadm\'s stderr away from the console. (clumens)- Pay attention to the stderr parameter to execWithCapture. (clumens)- For python2.6, our showwarnings function must take a line= parameter. (clumens)- If ext4dev is seen in the /etc/fstab, treat it as ext4 instead (#474484). (clumens)- Make sure to call _getConfig from our YumSorter subclass. (clumens)- Set proper text mode font for Greeks (#470589) (msivak)- Lots of translation updates.
* Thu Jan 29 2009 David Cantrell - 11.5.0.12-1- If ks=nfs:... is given, don\'t try to find the file via boot options (#480210). (clumens)- Fix cdrom install on machines with no network devices (wwoods)- updated fuzzy strings (jsingh)- Use modinfo to find out what firmware we need in initrd (wwoods)- Use the preconf object for yum configuration now (jantill). (clumens)- Updated Dutch translation adn only 1 -fuzzy- string left (zuma)- Add a boot target for the xdriver=vesa parameter and document it. (clumens)- repo.proxy is now a property, so check before setting it (#481342). (clumens)
* Wed Jan 21 2009 David Cantrell - 11.5.0.11-1- Fix a logic problem with network file write outs. (480769) (jkeating)- Only run selectBestKernel, selectBootloader, etc. for new installs. (wwoods)
* Mon Jan 19 2009 Chris Lumens - 11.5.0.10-1- btrfs install support (sandeen)- Default / to be ext4 (katzj)- Allow live installs to use ext4 as root and make the error message clearer (katzj)- Add support for Maithili and Nepali (#473209). (clumens)
* Fri Jan 16 2009 Chris Lumens - 11.5.0.9-1- Cracklib moved locations, account for this in our keepfiles. (jkeating)- Look in the right path for kernel module lists. (jkeating)- Fix more problems in expandModuleSet, based on a patch from markmc (#480307). (clumens)- Allow ext4 without magic argument (keep a flag for migrate) (katzj)- Fix pulling in network modules (katzj)- Support mounting NTFS filesystems (#430084) (katzj)- dejavu fonts changed package names, pick up new names. (jkeating)- TightVNC is now the default VNC server in Fedora (#480308). (clumens)- Only skip (over)writing netconfig if we have an actual instPath (jkeating)- The sets module is deprecated, so no longer use it. (clumens)
* Wed Jan 14 2009 David Cantrell - 11.5.0.8-1- Fix D-Bus usage in get_connection in loader (jkeating)
* Wed Jan 14 2009 Chris Lumens - 11.5.0.7-1- How to get raw pages from the wiki has changed again. (clumens)- Make sure the \'anaconda\' file gets the right detected type (alsadi, - Include the missing import. (clumens)
* Thu Jan 08 2009 David Cantrell - 11.5.0.6-1- Collect DSO deps for NetworkManager plugins. (dcantrell)
* Thu Jan 08 2009 Chris Lumens - 11.5.0.5-1- NetworkManager system settings plugins were renamed, change mk-images. (dcantrell)- Add a message to install.log when package installation is done (#476953). (clumens)- Add support for specifying which partition to upgrade (atodorov, #471232). (clumens)- pykickstart has a new version of the upgrade command. (clumens)- Log all calls to mount to /tmp/program.log as well. (clumens)- Log everything from execWithRedirect or execWithCapture (#467690). (clumens)- Update partedUtils.py:findExistingRootPartitions to return UUID (atodorov). (clumens)- Don\'t skip the method screen when going back and forth (#477991). (clumens)- Die on errors from upd-instroot/mk-images rather than continuing on (katzj)- The FTP USER command does not need to be followed by a PASS (#477536). (clumens)
* Mon Jan 05 2009 David Cantrell - 11.5.0.4-1- Workaround compile error due to (# 478663) (hdegoede)- Various packaging fixed from review (#225246) (hdegoede)- Show the header in certain non-lowres cases (#478765, alsadi AT ojuba.org). (clumens)- Remove doMultiMount. (clumens)- Use mount -t auto instead of passing a list of valid fstypes (#477328). (clumens)- Fix case sensitivity when searching for headers (kanarip)- Fix a traceback in checking for network install (ricky AT fedoraproject.org). (clumens)
* Tue Dec 23 2008 David Cantrell - 11.5.0.3-1- Initialize domainname to None (#477831) (dcantrell)- Do not import unused modules. (dcantrell)- Call \'/sbin/udevadm settle\' instead of /sbin/udevsettle (dcantrell)
* Tue Dec 23 2008 David Cantrell - 11.5.0.2-1- Require latest pykickstart for repo command (clumens)- Remove libdhcp
* from scripts/upd-instroot (dcantrell)- methodstr -> self.methodstr (dcantrell)- Rewrite iface_ip2str() to use libnm-glib (dcantrell)- Fix a few syntax error caugh by pychecker (hdegoede)- Remove isys.e2fslabel() and isys.getraidsb() (dcantrell)
* Thu Dec 18 2008 David Cantrell - 11.5.0.1-1- Remove plural forms from po/tg.mo (katzj)
* Thu Dec 18 2008 David Cantrell - 11.5.0.0-1- Reduce direct D-Bus calls in isys/iface.c. (dcantrell)- Allow \'ks\' to function as it once did (#471812) (dcantrell)- Fix telnet install support (#471082) (dcantrell)- Call \'udevadm settle\' instead of \'udevsettle\'. (dcantrell)- When using anaconda with kickstart file with UI mode - do not show the VNC question (#476548) (msivak)- Check error from asprintf() correctly for dhcpclass handling. (dcantrell)- Use libnm_glib in net.c:get_connection() (dcantrell)- Add libnm_glib CFLAGS and LIBS to loader\'s Makefile. (dcantrell)- BR NetworkManager-glib-devel. (dcantrell)- Only write the short hostname to the localhost line (#474086) (dcantrell)- Updated Tajik Translation - Victor Ibragimov (victor.ibragimov)- Copy /etc/dhclient-DEV.conf file to target system (#476364) (dcantrell)- Use macros for D-Bus paths (dcantrell)- Let X tell us when it\'s launched rather than just sleeping. (ajax)- When there\'s no baseurl, set a default of [] instead of [\'\'] (#476208). (clumens)- cracklib now raises exceptions on bad passwords (rzhou, #476312). (clumens)- Make sure ssh doesn\'t get duplicated in the open port list (#474937). (clumens)- mdraid1: default to putting grub on partition instead of mbr (#217176) (hdegoede)- Don\'t install the games group as part of office/productivity (#472324). (clumens)- Don\'t dump encryption passphrases. (dlehman)- Write anacdump.txt upon receipt of SIGUSR2 (from clumens). (dlehman)- Use stacks instead of tracebacks in traceback handlers. (dlehman)- Unmount swap devices when migrating filesystems, then reactivate (#473260). (clumens)- Handle both /dev/sr0 and sr0, since that\'s what cdromList gives (#475083). (clumens)- In iface_ip2str(), make sure to advance to next item before continue. (dcantrell)- We already have _GNU_SOURCE defined in Makefile.inc (dcantrell)- Remove XXX comment in net.c about GATEWAY (dcantrell)- Use strverscmp() from glibc in place of rpmvercmp() (dcantrell)- Remove readLine() function from loader/loadermisc.c (dcantrell)- Do not write SEARCH line to ifcfg-DEVICE file (#474858) (dcantrell)- Preserve existing network configuration files during install (#461550) (dcantrell)- Send unique vendor class identifier unless user specifies one. (dcantrell)- Avoid tracebacks when filling in static network config fields (#474275) (dcantrell)- Prevent network install when no network devices are found (#470144) (dcantrell)- Remove markup from text before printing it in cmdline mode (#470253). (clumens)- Move strip_markup() into iutil. (clumens)- Fix up plural forms header so that python doesn\'t blow up for us (katzj)- Change text to reflect Jesse\'s comments (katzj)- Add support for the Tajik language (#455963). (clumens)- Add a button to the UI to ignore all missing packages. (clumens)- First small eu.po transtation, just to be sure that the system is set up OK. (mikel.paskual)- mini-wm: Turn on automatic window redirection. (ajax)- Better naming for LVM volume groups and logical volumes (#461682) (dcantrell)- Partition requests can be None when populating the tree. (#474284) (dlehman)- Say we are unable to configure the network interface (#467960) (dcantrell)- Match textw/network_text.py strings to iw/network_gui.py (#470145) (dcantrell)- In addSnap(), check snapshots for data key before continuing (#433824) (dcantrell)- Load FCP modules early for CD/DVD install (#184648) (dcantrell)- Update mk-s390-cdboot.c to work with large kernel images (#184648) (dcantrell)- Make sure fstype exists before we try to test it (#473498). (clumens)- Updated a small correction in kn locale (svenkate)- Use modules.
* files for finding modules of a type rather than modinfo (katzj)- Make complete text mention updates (#244431) (katzj)- Make text for autopartitioning types clearer (#441350) (katzj)- Allow installing grub on the MBR if /boot is on mdraid (#217176) (hdegoede)- Fix some spelling errors in German translation (fabian)- Make the required media dialog less wordy (#469557). (clumens)- returnNewestByName now raises an error instead of returning [] (#472462). (clumens)- Fix death on login of an OLPC on a live image (katzj)- Fix ld-
*.so globbing for glibc-2.9 . (pjones)- Do not bring up network for non-remote kickstart locations (#471658) (dcantrell)- Resolve dm-X devices returned by pvdisplay. (#448129) (dlehman)- More shell script syntax fixing (katzj)- Only bring up the network dialog on package failures if required (#471502). (clumens)
* Wed Nov 12 2008 Chris Lumens - 11.4.1.58-1- Add comps groups for new repos that are added (#470653) (katzj)- Support upgrades of systems whose rootfs is on an LV. (#471288) (dlehman)- Use hasPassphrase() instead of directly accessing passphrase member. (dlehman)- Don\'t dump private class members (those with leading \"__\") (dlehman)- Explicitly close the CD drive after the user hits \"continue\" (#375011) (pjones)- Fix shell syntax error (#471090) (ivazqueznet)- Save the /etc/fstab before overwriting it on upgrades (#452768, #470392). (clumens)
* Tue Nov 11 2008 David Cantrell - 11.4.1.57-1- Fix more UnicodeDecodeErrors, hopefully for good this time (#470733). (clumens)- iscsi do missing value check only once (hdegoede)- Don\'t try to label XFS filesystems on livecd installs (#470951). (clumens)- Include cracklib .mo files and look up strings in the right domain. (clumens)- Bugzilla has changed its return values for a couple queries. (clumens)- Set the default keyboard based on the language (#470446). (clumens)- Prevent traceback for vnc installs on KVM guests (#470559) (dcantrell)- Bring up networking early enough for syslog= param (#470513) (dcantrell)- Sleep a bit before calling udevsettle in iscsiTarget.login (#470073, - kickstart, iscsi do not call iscsi.startup after startIBFT has been called (hdegoede)- Do not stop and restart iscsid when rescanning disks/partitions (#470223) (hdegoede)- iscsi.startup should not login to targets as we are already logged in (#470230) (hdegoede)- Remove obsolete normally never reached code from _stopIscsiDaemon (#470229) (hdegoede)- The function getEncryptedDevice gets called correctly expect when we are in (jgranado)- More translations
* Thu Nov 06 2008 David Cantrell - 11.4.1.56-1- Don\'t have the key icon take up so much space on the LUKS dialog (#470338). (clumens)- Avoid getting linux-base in the kernel list (katzj)- Deselect groups when we reset things also (#469854) (katzj)- make iscsi login code wait for udev to create the devices (#466661, - Set the correct path when using the directory chooser. (clumens)- We always need a wait window, not just when the repo has a name. (clumens)- Set initial state of IP configuration fields in text mode (#469933) (dcantrell)- Prevent traceback when there are no network devices (#469339) (dcantrell)- Indentation fix. (pjones)- Let users edit net settings on network failure in stage 1 (#465887) (dcantrell)- Move startNewt later to avoid printing extra messages on the screen (#469687). (clumens)
* Mon Nov 03 2008 David Cantrell - 11.4.1.55-1- Revert \"Make sure dialog deletions take effect sooner (#455676).\" (clumens)- Don\'t set up the launcher for the installer on XO (katzj)- Whitespace cleanups for timezone.py (dcantrell)- Do not store mount options in loaderData->instRepo (#467760) (dcantrell)- Make sure we look up the IP address for the correct device (#469439) (dcantrell)- Remove unused bool() function. (dcantrell)- Check for required space for / on live installs (#468867) (katzj)- Add a basic method for checking the minimal size needed for a backend (katzj)- Fix typo that somehow snuck in (katzj)- If there\'s no language selected, don\'t traceback (#469578). (clumens)- Improve filtering of non-available groups (#469438) (katzj)- filer.py: set defaultProduct in __init__ (hdegoede)- Fix indentation error in filer.py (again) (hdegoede)- Rebuild keymaps to get rid of trq.map (#469433). (clumens)- Provide sample punch card reader script for s390x (#462953) (dcantrell)- Fix a typo that shouldn\'t have even gotten though. (clumens)- Check that the platform and product are also correct (#469367). (clumens)- Remove cio_ignore functionality for s390x (dcantrell)- Remove bootdisk/s390 (dcantrell)- If method=nfs: is given, check if it\'s really an NFSISO install (#468885). (clumens)- Get the right list elements for the iscsi text interface (#466902). (clumens)- Don\'t traceback when displaying error messages (#469372). (clumens)- Make sure we differentiate locked luks devs from deleted ones. (dlehman)- Fix a typo that breaks kickstart with encryption. (#469318) (dlehman)
* Thu Oct 30 2008 David Cantrell - 11.4.1.54-1- Call startNewt earlier than network bring up (#469171). (clumens)- Write out the path to the repo, not anaconda-ks.cfg (#467753). (clumens)- Allow specifying devices by path if they\'re files (#468504) (katzj)- Fix the last pychecker warnings in master (hdegoede)- Add --strict option to runpychecker.sh (hdegoede)
* Wed Oct 29 2008 David Cantrell - 11.4.1.53-1- Don\'t sleep(5) after xrandr (ajax)- Force DPI to 96 even harder (#458738) (ajax)- Don\'t try to switch VT to the one that X is on (ajax)- Only copy /etc/resolv.conf if instPath != \'/\' (dcantrell)- \'is not\' -> \'!=\' (dcantrell)- Write --dhcpclass instead of --class to the anaconda ks file. (jgranado)- Fix 2 issues in pyparted found by pychecker (hdegoede)- Add a bit of documentation to the top of runpychecker.sh (hdegoede)- Add runpychecker.sh script and pychecker-false-positives file (hdegoede)- Fix saving tracebacks via scp while in text mode. (clumens)- Search for the hash in the whiteboard, not as the entire whiteboard. (clumens)- Fix various syntax errors caught by PyChecker (hdegoede)- Wouldn\'t it be nice to have some real documentation in filer.py? (clumens)- Make sure the productVersion given by .treeinfo exists in bugzilla (#468657). (clumens)
* Mon Oct 27 2008 David Cantrell - 11.4.1.52-1- Let DNS lookups work from %post scripts (#468132) (dcantrell)- Do not use /.tmp for temporary files (#468720) (dcantrell)- Don\'t treat encrypted PVs as available if we don\'t have the key. (#465240) (dlehman)- Do all new device passphrase prompting from partitioningComplete. (dlehman)- Fix the obviously stupid typo. (clumens)- There\'s a new version of the firewall command for F10 (#467753). (clumens)- Another fix for printing package summaries in text mode (#468283). (clumens)- Fix traceback in network.bringUp() (#468651) (dcantrell)- lvresize requires a --force arg now (#468478) (katzj)- Include return code on resize failure error message (#468479) (katzj)
* Fri Oct 24 2008 David Cantrell - 11.4.1.51-1- Catch UnicodeDecodeError so traceback messages display anyway. (dcantrell)- Do not write NM_CONTROLLED=yes to ifcfg files (#468028) (dcantrell)- Log D-Bus messages at ERROR or INFO level. (dcantrell)- Write dhcpclass to the dhclient conf file for the device (#468436) (dcantrell)- Tell NetworkManager not to touch network interfaces when / is a netfs (hans)- Catch more X failures and fallback to text (#467158). (clumens)- Fix a typo when using network --gateway (#468364). (clumens)- Fix icon (#468273) (katzj)- Remove extra debug info. (pjones)- Fix the damn spinner in the progress bar. (pjones)- Fix whitespace. (pjones)- Fix \"looking for installation images\" when there\'s no disc at all. (pjones)- Make sure dialog deletions take effect sooner (#455676). (clumens)- Make cdrom drive door status messages be INFO not DEBUG. (pjones)- Don\'t switch to tty6 on vnc installs. (clumens)- Update font list (#462295). (clumens)- Don\'t display the entire lengthy device description (#467825). (clumens)- Fix ext4 detection on existing partitions (#467047) (rvykydal)- Make sure we handle the /tmp/method file for FTP correctly (#467753). (clumens)- Do not write NM_CONTROLLED=yes to ifcfg files (#468028) (dcantrell)- Revert \"dhclient-script not needed for NetworkManager\" (clumens)- Skip Installation Repo when writing out repo kickstart lines. (clumens)- Correct media check docs (#468061). (clumens)- Many translation updates
* Fri Oct 17 2008 Chris Lumens - 11.4.1.50-1- Update several font package names that we were missing. (clumens)- Only bring up the netconfig dialog if the repo requires networking. (clumens)- cmdline.py: Fix a small typo in a message (rh 467338) (hansg)- Enable CCW devices used for installation (#253075) (dcantrell)- I don\'t know what trq.map.trq-map is, but let\'s not include it. (clumens)- If networking is needed for yum repos, bring it up before fetching repodata. (clumens)- Force DPI to 96 when launching X. (#458738) (ajax)- Lots of translation updates.
* Tue Oct 14 2008 David Cantrell - 11.4.1.49-1- Make kickstart installs work again (#374271, #392021, #448096, #466340, - Let users go Back when loading updates. (dcantrell)- Write ifcfg files to /etc/sysconfig/network-scripts instead of /.tmp (dcantrell)- Handle unknown hosts in getDefaultHostname (#466775) (dcantrell)- Try to look up the hostname by the IP address NM reports (#466775) (dcantrell)- NM no longer provides the hostname as a property (#466775). (clumens)- ext4dev -> ext4 (esandeen). (clumens)- Move persistent network udev rule to under /etc (#464844). (clumens)- Update keymaps to include latest Romanian settings (#466117). (clumens)- Take ip= parameter values by not resetting ipinfo_set. (dcantrell)
* Fri Oct 10 2008 David Cantrell - 11.4.1.48-1- Remove unnecessary STEP_IP code. (dcantrell)- Fix how configureTCPIP() returns. (dcantrell)- Write new sysconfig data to a tmpdir first, then move in place. (dcantrell)- Write NM_CONTROLLED=yes rather than NM_CONTROLLED= (dcantrell)- Get rid of some iface flags that were not doing anything anymore. (dcantrell)- Generate new config files in /.tmp in writeEnabledNetInfo() (dcantrell)- Remove unused variables from configureTCPIP() (dcantrell)- Do not call get_connection() twice for DHCP. (dcantrell)- Ask for language and keyboard in rescue mode (#466525). (clumens)- Fix bringing up the network in rescue mode (#466523). (clumens)- If we don\'t have a translation for a lang name, just use the English (#466515) (katzj)- Disable some more IPv6 checks. (clumens)- Fix a typo (second part of #466374) (katzj)
* Thu Oct 09 2008 David Cantrell - 11.4.1.47-1- Tag problems in pkgcvs. Wish we still had force-tag
* Thu Oct 09 2008 David Cantrell - 11.4.1.46-1- Pull in static network settings from the boot: line (#465270) (dcantrell)- Do not segfault when going back to select a new interface (#465887) (dcantrell)- Do not test for DNS settings in mountNfsImage() (dcantrell)- Populate struct iface correctly in setupIfaceStruct() (dcantrell)
* Thu Oct 09 2008 Chris Lumens - 11.4.1.45-1- Fix sorting of repos so we always return an integer value (#466174). (clumens)- Change the upgrade progress bar to pulse (#466053). (clumens)- Mark iscsi disks not used for / as autostart (rh461840) (hans)- Always display the wait window when fetching repo information. (clumens)- Lazily unmount everything before killing NetworkManager (#463959). (clumens)- lang-names really does need to depend on subdirs (katzj)- Reset targetLang on language change (#465981) (katzj)- Honor static net parameters with NM (#465270) (dcantrell)
* Mon Oct 06 2008 David Cantrell - 11.4.1.44-1- Do not rely on loaderData->noDns to tell if we have DNS configured. (dcantrell)- Skip askmethod dialog if user passes repo= and stage2= (dcantrell)- Reset resolver in get_connection() (dcantrell)- Fix problems dealing with PXE boot and the ksdevice= parameter. (dcantrell)- Disable more IPv6 code in loader for now. (dcantrell)- Write BOOTPROTO=static for manual IPv4 config. (dcantrell)- Disable IPv6 widgets for F-10. (dcantrell)- Add iwlagn driver firmware (#465508). (clumens)- Move starting HAL to after we\'ve probed for hardware. (clumens)- Don\'t try to load a couple modules that no longer exist. (clumens)- The Chinese font package has changed names (#465290). (clumens)- Fix a traceback when there\'s no ksdevice given (#465638). (clumens)- Fix traceback in post install configuration (hans)
* Fri Oct 03 2008 David Cantrell - 11.4.1.43-1- Disable IPv6 interface widgets in loader for now. (dcantrell)- Start NetworkManager earlier (#462083) (hans)- Work around gtk2 bug (#465541) (hans)- Move our yum.conf out of /etc (#465160) (katzj)- Correctly display the IP address a vnc viewer should connect to (#465353). (clumens)- lohit-fonts-malayam has been replaced by smc-fonts-meera (#456449). (clumens)- Fix a typo in cleaning up repos. (clumens)- Fix the mount error reading for real this time (pjones, #465250). (clumens)- Support ksdevice=link when booting from boot.iso. (dcantrell)- Automatically select NIC based on ksdevice= boot parameter. (dcantrell)
* Wed Oct 01 2008 David Cantrell - 11.4.1.42-1- Revert \"Finally controlled the plural issue at #508 in Japanese\" (dcantrell)
* Wed Oct 01 2008 David Cantrell - 11.4.1.41-1- Fix text inconsistency (#465165). (clumens)- If there\'s an error running Xvnc, also print it to the console. (clumens)- Set the installation repo when using the askmethod UI (#463472). (clumens)- Fix a segfault when the wrong HDISO repo parameter is given. (clumens)- Remove the \'Installation Repo\' cache directory after install (#464853). (clumens)- If there aren\'t any usable NICs, don\'t write out a config (#465127). (clumens)- It helps to specify what the method string should be split on (#464855). (clumens)- Gateway and nameserver are optional for static network configuration. (dcantrell)- Store nameserver in NetworkDevice object. (dcantrell)- Fix a traceback calling enableNetwork (#464849). (clumens)- Enable groups when creating new repos since yum doesn\'t do that now. (clumens)- Update FQDN patch to fix a couple tracebacks (#464191). (clumens)- Fix static network configuration from boot.iso installs. (dcantrell)- Use all caps naming for the netdev keys. (dcantrell)- Left justify text in ui/netconfig.glade interface. (dcantrell)- Use the right attribute for repo URLs. (clumens)- Use fullscreen for small screens (#444943) (katzj)- Another try at fixing up reading errors from mount. (clumens)- Don\'t traceback if no baseurl has been set yet. (clumens)- Allow users to enter a hostname or FQDN during installation (#464191) (dcantrell)- Whitespace cleanups. (dcantrell)- Fix mk-s390-cdboot on s390x (#184648) (dcantrell)- Run all text through unicode() before putting it into the TextBuffer. (clumens)- Add reverse chap iscsi bits for kickstart (hans)- Properly center the passphrase entry dialog. (clumens)- Fix test for an empty hostname. (clumens)- Support installs to SD via MMC (#461884) (katzj)- Set ANACONDA_PRODUCTNAME, etc from /etc/system-release (#464120) (alsadi)- Reduce code duplication by moving methods into backend (katzj)- Select packages after repos are set up (#457583) (katzj)- Add a basic reset method (katzj)- Cleanups and simplifications to repo setup (clumens) (katzj)- Revert \"Revert \"lang-names should really only depend on lang-table\"\" (katzj)- Fix lang-name generation + fix traceback with LANG=C (katzj)- Allow going back to the method selection screen on error (#463473). (clumens)- Make the boot loader device dialog less ugly (#463489). (clumens)- Look in images/ for install.img on HDISO (#463474). (clumens)- Sort Installation Repo to the top of the repo list. (clumens)- Fuzzy string to fix translation build (katzj)
* Wed Sep 24 2008 David Cantrell - 11.4.1.40-1- Fix network interface bring up in text mode (#463861, #462592) (dcantrell)- Bring back isys.resetResolv() and fix NetworkManager polling in network.py. (dcantrell)- Poll \'State\' property from NetworkManager in network.bringUp() (dcantrell)- Log error in rescue mode is network.bringUp() fails. (dcantrell)- Set the first network device in the list to active. (dcantrell)- Get rid of firstnetdevice in Network (dcantrell)- Do not write /lib/udev.d rules if instPath is \'\' (dcantrell)- Fix problems with bringDeviceUp() calls (#463512) (dcantrell)
* Mon Sep 22 2008 David Cantrell - 11.4.1.39-1- Fix a traceback when getting the interface settings (#462592). (clumens)- self.anaconda -> anaconda (clumens)
* Sat Sep 20 2008 David Cantrell - 11.4.1.38-1- Restore old lang-names generation method (dcantrell)- Remount /mnt/sysimage/dev after migrating filesystems. (clumens)- Use the instroot parameter like we should be doing. (clumens)
* Fri Sep 19 2008 Chris Lumens - 11.4.1.37-1- Set the filename on the traceback when we upload it (wwoods).- Don\'t worry about errors looking up protected partitions on upgrades. (clumens)- Fix test for allowing the installation source to be on the root fs (#462769). (clumens)- lang-names should really only depend on lang-table (katzj)- Don\'t make the .desktop file unless we actually need to (katzj)- Fix lang-name generation (katzj)- Look for xrandr in the search path. (clumens)- Make the textw network screen match the iw interface by only prompting for hostname (#462592) (dcantrell)- Pick up hostname if we have it, otherwise use localhost.localdomain (#461933) (dcantrell)- dhclient-script not needed for NetworkManager (dcantrell)- Add getDefaultHostname() to network.py (dcantrel)- Write out NETMASK and BROADCAST correctly in loader. (dcantrel)- Fix problems with manual network configuration in loader. (dcantrel)- anaconda-yum-plugins is now in its own source repo. (clumens)- Remove most of the network configuration from text mode as well (#462691). (clumens)- Add an extra newline to the empty partition table message. (clumens)- Fixup DiskSet._askForLabelPermission() (markmc)
* Mon Sep 15 2008 David Cantrell - 11.4.1.36-1- Remove invalid i18n stuff to let anaconda build. (dcantrell)- Remove doConfigNetDevice() prototype. (dcantrell)
* Mon Sep 15 2008 David Cantrell - 11.4.1.35-1- Call network.bringDeviceUp() instead of old isys functions. (dcantrell)- Pass device name to network.setDNS() and network.setGateway(). (dcantrell)- NetworkManager fixes in network.py (dcantrell)- Remove code from isys not needed for NetworkManager. (dcantrell)- Avoid writing out NM_CONTROLLED more than once. (dcantrell)- Write out final ifcfg-DEVICE files correctly. (dcantrell)- Use POSIX and LSB hostname length limit. (dcantrell)- Consistent whitespace usage in network.py (dcantrell)- Do not try to start hald or dbus-daemon from anaconda. (dcantrell)- On HDISO installs, mark LABEL= and UUID= partitions as protected. (clumens)- Do encrypted device passphrase retrofits while activating partitioning. (dlehman)- Use one passphrase for all new LUKS devices and offer retrofit to old ones. (dlehman)- There\'s only one passphrase member (encryptionPassphrase) in Partitions. (dlehman)- Only add LUKSDevice instances to PV requests as needed. (dlehman)- New device passphrase is now always global w/ option to retrofit. (dlehman)- Don\'t prompt for a passphrase when creating encrypted devices. (dlehman)- Define a method to add a passphrase to an existing LUKS device. (dlehman)- Fix a traceback when starting a shell in rescue mode (#462148). (clumens)- md, lock_nolock, and dm_emc kernel modules no longer exist. (clumens)- Fix iscsi disk detection with newer kernels (rh 461839, 461841) (hans)- Fix the crash reported in bug 454135 (hans)- Make iBFT reading explicit from a higher level (hans)- Add ibft flag to ease in testing. (hans)- Support iSCSI CHAP and Reverse CHAP authentication (rhbz#402431, rhbz#432819) (hans)- Don\'t set iscsi devices to autostart (rhbz#437891) (hans)- Add full CHAP support to iSCSI. (rhbz#432819) (hans)- Do not try to initialize iSCSI, when no portal (#435173) (hans)- Fix wrong function names for iscsi login/start (rhbz#295154) (hans)- Set an attribute when iscsid is started (#431904). (hans)- Better fixes for iscsi probing (patch from jlaska) (hans)- Make sure ISCSIADM and such are defined (rhbz#431924) (hans)- Fix iscsi so that mkinitrd can actually talk to the running daemon (hans)- Make iscsi/ibft work (hans)- Add mk-images changes forgotten in previous commit (hans)- Add support for iSCSI iBFT table (#307761) (hans)
* Thu Sep 11 2008 Chris Lumens - 11.4.1.34-1- Always start NM so we can talk to it in the boot.iso case (#461071). (clumens)- Use the device path to identify LUKS devs in /etc/fstab. (#460700) (dlehman)- Use the LUKS UUID instead of device nodes in all references. (#460700) (dlehman)- LUKSDevice.getScheme() no longer cares if the dev has a passphrase. (#461203) (dlehman)- Correct translation to fix the build. (clumens)- Add the method string back into anaconda-ks.cfg. (clumens)- Let\'s try pulling libsqlite into the initrd one more time. (clumens)- Don\'t traceback at the end of live installs (katzj)- Correct the message telling you to use a VNC password. (clumens)- Remove unused TIMEZONES= crud. (clumens)- print doesn\'t yet support the file= syntax in our version of python. (clumens)- Catch errors from using the wrong bugzilla field and display them. (clumens)- Fix line wrapping on part type screen (jlaska, #461759).- rep_platform has been renamed to platform. (clumens)
* Tue Sep 09 2008 Chris Lumens - 11.4.1.33-1- Include NetworkManager and dbus libraries on 64-bit arches (#461632). (clumens)- We need libsqlite3.so in upd-instroot before it can be in the initrd. (clumens)- Fix partitions growing (backport of rhbz #442628) (rvykydal)- Kickstart timezone validity check fixed (#461526) (rvykydal)- Add more kernel crypto modules (#443545). (clumens)- Make the progress bar move when downloading the install.img (#461182). (clumens)- Add overrideDHCPhostname as an attribute. (clumens)- Fix saving to remote hosts (#461500). (clumens)- short_desc is now summary. (clumens)- Use print() as a function. (pjones)
* Sat Sep 06 2008 David Cantrell - 11.4.1.32-1- Use struct audit_reply instead of struct auditd_reply_list (dcantrell)
* Sat Sep 06 2008 David Cantrell - 11.4.1.31-1- Use --service=NAME in firewall.py when calling lokkit (dcantrell)- Make NM work for the DHCP case, at least (dcbw) (#461071). (clumens)- Sleep a little after dbus to give it time before HAL connects. (clumens)- Add libsqlite to the initrd, which is needed by NSS libs. (clumens)- Add more dlopen()ed libraries to the initrd. (clumens)- Fix various problems with the exn saving UI (#461129). (clumens)- Fail gracefully if we can\'t talk to NetworkManager over DBus. (dcantrell)- Reword text for easy of translating plurals (#460728). (clumens)- Make sure /bin/sh is linked to /bin/bash (dcantrell)- Do not include /usr/lib/gconv in install.img (dcantrell)- Add /etc/NetworkManager/dispatcher.d to the install.img. (clumens)- Remove last vestiges of rhpxl and pirut. (clumens)- Only one list of packages in upd-instroot, thanks. (clumens)- Add xrandr back into the install.img (#458738). (clumens)- Add a couple more directories to search paths. (clumens)- Do repo setup and sack setup as separate steps. (clumens)- Fix a typo that was causing repos in the kickstart file to be skipped (#451020). (clumens)
* Fri Aug 29 2008 David Cantrell - 11.4.1.30-1- Fix a traceback with unencrypted autopart. (dlehman)- doLoggingSetup has grown some new arguments (#460654). (clumens)- Updated German translation (fabian)- Remove references to isConfigured in network.py (dcantrell)- Define the NM_STATE_
* constants in isys.py (dcantrell)- Rewrite NetworkWindow to only prompt for hostname. (dcantrell)- Pad the icon more in network.glade (dcantrell)- Removed iface_dns_lookup() (dcantrell)- Don\'t pass NULL to dbus_message_unref() (dcantrell)- New network configuration screen for GTK+ UI. (dcantrell)- Pass family to iface_ip2str() call (dcantrell)- Rewrite iface_ip2str() to talk to NetworkManager over D-Bus (dcantrell)- New translation (besnik)- Pull in the gtkrc file so we can find the theme. (clumens)- Use signed git tags (katzj)- Skip networkDeviceCheck in dispatch.py (dcantrell)- Do not call has_key() on NetworkDevice, use isys.NM_
* (dcantrell)- Separate lines per BR. (dcantrell)- Remove invalid line iw/autopart_type.py (dcantrell)- Fix syntax error in yuminstall.py, fix pychecker warnings. (dcantrell)- Updated Hungarian translation (sulyokpeti)- Add missing () to function definitions. (dcantrell)- Fix err handling in doMultiMount() (dcantrell)- Revert \"Pass --follow to git-log\" (dcantrell)- Remove references to /tmp/netinfo (dcantrell)- Gather network settings from NetworkManager and ifcfg files. (dcantrell)- Update the pot file and refresh the pos (katzj)- For all HTTP/FTP repos, keep the cached repodata (#173441). (clumens)- Fix a traceback when trying to set the status whiteboard on a bug. (clumens)- When the wrong filesystem type is used, raise a more explicit error. (clumens)- Don\'t copy the install.img over in single media cases (#216167). (clumens)- Remove isys.getopt() (dcantrell)- Remove code not used in net.c (dcantrell)- Write to /etc/sysconfig/network-scripts/ifcfg-INTERFACE (dcantrell)- mystrstr() -> strstr() (dcantrell)- Expand getDeviceProperties to return all devices. (dcantrell)- Pass --follow to git-log (dcantrell)- Support accessing preexisting LUKS devs using LRW or XTS ciphers. (#455063) (dlehman)- Use yum\'s handling of optional/default/mandatory package selection (#448172). (clumens)- List iSCSI multipath devices in the installer UI. (dcantrell)- Fix text wrap width on the partition type combo, for real this time (#221791) (dlehman)- For /dev/hvc0 terminals, set TERM to vt320 (#219556). (dcantrell)- The Timer class is no longer used. (clumens)- Handle preexisting swraid w/ encrypted member disks/partitions. (dlehman)- Don\'t try to close a dm-crypt mapping that is not open. (dlehman)- Remove unused silo code that wouldn\'t even build if it were used. (clumens)- Remove some really old, really unused code. (clumens)- Add another mount function that takes a list of fstypes to try. (clumens)- Download progress indicator for FTP and HTTP in stage 1. (dcantrell)- Make sure we wait for NetworkManager. (dcantrell)- Renamed loader2 subdirectory to loader (hooray for git) (dcantrell)- Do not include wireless.h or call is_wireless_device() (dcantrell)- Add getDeviceProperties() and rewrite getMacAddress() (dcantrell)- Do not include wireless.h (dcantrell)- Rewrite isys.isWireless() to use D-Bus and NetworkManager (dcantrell)- Rewrite isys.getIPAddress() to use D-Bus and NetworkManager. (dcantrell)- Include ../isys/ethtool.h instead of ../isys/net.h. (dcantrell)- Rename isys/net.h to isys/ethtool.h, removed unnecessary typedefs. (dcantrell)- Removed waitForLink() function in loader. (dcantrell)- Remove initLoopback() function in loader (dcantrell)- Use D-Bus properties to get current NM state. (dcantrell)- Use dbus in hasActiveNetDev() and _anyUsing() (dcantrell)- Use NetworkManager instead of libdhcp. (#458183) (dcantrell)- When mount fails, pass the error message up to the UI layer. (clumens)- Bring askmethod back to prompt for the location of install.img. (clumens)
* Fri Aug 22 2008 Chris Lumens - 11.4.1.29-1- Enable yum plugins. (clumens)- In the preupgrade case, repo=hd: means an exploded tree on the hard drive. (clumens)- Remove preupgrade-specific hacks. (clumens)- Add conf files for our yum plugins so they can be enabled. (clumens)- Create a subpackage containing the yum plugins. (clumens)- Add the new blacklist and whiteout yum plugins. (clumens)- Allow retrying if the ISO images aren\'t found (for the USB case). (clumens)- Include \"--encrypted\" in anaconda-ks.cfg partitioning as needed. (#459430) (dlehman)- Support establishing a global passphrase when creating encrypted devices. (dlehman)- Display the lock icon for encrypted RAID members. (#459123) (dlehman)- More descriptive drive message when warning on format. (dcantrell)- Need to import rhpl for things like switching to pdb. (clumens)- Fix traceback in passphrase handling code for encrypted RAID requests. (#459121) (dlehman)- Copy the install.img to /tmp on HD installs. (clumens)- Fix a typo (dcantrell).- Expert mode was disabled in 2004. Remove it now. (clumens)- Remove an extra \"Local disk\" option (#459128). (clumens)- Clear up error reporting on upgrades when devices are listed by UUID. (clumens)- If the UI was used to specify a repo, construct a repo param (#458899). (clumens)- Fix a traceback calling createMapping. (clumens)- First crack at upgrade of systems with encrypted block devices. (#437604) (dlehman)- In kickstart, prompt for new LUKS dev passphrase if not specified. (#446930) (dlehman)- Remove passphrase check hack from LUKSDevice.getScheme. (dlehman)- Allow specification of a device string for display in passphrase dialog. (dlehman)- Add encrypted device passphrase dialog for text mode. (dlehman)- Fix PartitionDevice.getDevice to take asBoot into account. (dlehman)- Make passphrase dialogs appear in the center of the screen. (#458114) (dlehman)- Consider clearpart and ignoredisk when scanning for encrypted partitions. (dlehman)- Correctly handle typos in the stage2 location when inferred from repo=. (clumens)- Fix the loader UI when prompting for stage2.img on HDISO. (clumens)- Rename stage2.img to install.img (dcantrell)- Bring up the network before saving a bug via scp. (clumens)- Make it more explicit we want the stage2.img URL, not the repo URL. (clumens)- Add the match type so we don\'t find all bugs. (clumens)- Make upd-updates create the updates.img you specify if it doesn\'t already exist. (pjones)- Don\'t base mpath/dmraid/raid startup/stopping based on if lvm is activated yet, (pjones)- Add diskset.devicesOpen boolean, so we can tell if devices should be started (pjones)- Add dirCleanup back in so we don\'t leave install metadata behind. (clumens)- Move betanag to after keyboard and language are setup. (clumens)- Add module dependencies of qeth.ko (#431922). (clumens)- Copy the changes from RHEL5 for the linuxrc.s390 over. (clumens)- Disable SCSI devices so we can safely remove a LUN (bhinson, #249341). (dcantrell)
* Tue Aug 12 2008 Chris Lumens - 11.4.1.28-1- More fixes to include udev rules in the initrd (#458570). (clumens)- Catch the first non-generic-logo package that provides system-logos. (clumens)- Remove extra \')\' in install-buildrequires (dcantrell)
* Mon Aug 11 2008 Chris Lumens - 11.4.1.27-1- Handle \'rescue\' and %post in rescue mode (atodorov)- Delay the duplicate label error until the label is actually used (#458505). (clumens)- Enable wireless modules again for now as a test (#443545). (clumens)- udev rules have changed location (#458570). (clumens)- Add install-buildrequires target. (dcantrell)
* Fri Aug 08 2008 Chris Lumens - 11.4.1.26-1- Remove a bunch of cachedir setting code that is no longer needed. (clumens)- Fix segfaults on interactive NFS installs (#458416). (clumens)- Fix LVM error handling so the exceptions actually get into the namespace. (pjones)- yuminstall: don\'t look for kernel-xen anymore (markmc)- console: kill the /proc/xen hack (markmc)- yuminstall: don\'t ever stop people installing the virt group (markmc)- lang: kill xen keymap hack (markmc)- bootloader: remove old kernel-xen-{guest, hypervisor} handling (markmc)- Preserve baseurl/mirrorlist and mirrorlist checkbox settings across loads. (clumens)- It\'s BETANAG, not betanag. (clumens)- Various string fixes (clumens).- Wrap spec file changelog lines. (dcantrell)- mk-images: replace kernel-xen with pv_ops kernel (markmc)- Use a temporary location for yum cache data (#457632). (clumens)- Remove extra newtPopWindow() call that was causing a crash (#260621). (dcantrell)- Add /sbin/sfdisk (#224297). (dcantrell)- Do not call _isys.vtActivate() on s390 or s390x platforms (#217563). (dcantrell)- Change the maximum recommended swap size to \"2000 + (current ram)\".(#447372) (jgranado)- Make it >= not > for the memory size comparison (#207573) (pjones)- Allow float comparison between nic names in isys.py. (#246135) (joel)- Fix formatting on disk sizes >1TB (pjones)- Don\'t traceback when trying to remove /mnt/sysimage (#227650). (dcantrell)- If we\'re booting off the boot.iso, don\'t prompt for lang or kbd (#457595). (clumens)- Don\'t mention images/diskboot.img anymore (#441092). (clumens)- Remove iSeries image generation (#456878) (dcantrell)- Display capslock status correctly (#442258) (dcantrell)
* Mon Aug 04 2008 Chris Lumens - 11.4.1.25-1- Eject the CD/DVD if we booted off a boot.iso as well (#442088). (clumens)- Fix a GTK warning that only appears with s-c-ks running from a shell (#431844). (clumens)- Break a few functions out of yuminstall.py into their own file. (clumens)- We\'re not actually activating new filesystems quite yet. (clumens)- Fix a typo in the initial partitioning screen. (clumens)- Use system-logos instead of hardcoding fedora-logos (#457378). (clumens)- anaconda can no longer be None when we create a DiskSet instance. (clumens)- Remove LabelFactory since we now rely on UUIDs for everything. (clumens)- Filter out repos that aren\'t enabled when running in betanag mode. (clumens)- Close the transaction between CDs (#457126). (clumens)- Split media fixes. (clumens)- Handling (ask user) of invalid timezone value in kickstart added (#404323) (rvykydal)
* Thu Jul 31 2008 Jeremy Katz - 11.4.1.24-1- Don\'t try to use self.tree as the mode to open .discinfo. (clumens)- Remove all the RPM lock files before creating a new transaction (#456949). (clumens)- Support VDSK devices on s390x (#264061) (dcantrell)
* Wed Jul 30 2008 Chris Lumens - 11.4.1.23-1- Fix mke2fs argument passing (#457285). (clumens)- Disable logging in the firmware loader, since it clobbers other log messages. (pjones)
* Wed Jul 30 2008 Chris Lumens - 11.4.1.22-1- udevsettle takes forever, so display a waitWindow. (clumens)- Leave anaconda-runtime around for mk-images run. (dcantrell)
* Tue Jul 29 2008 Jeremy Katz - 11.4.1.21-1- Remove an instance of NEEDGR still existing to fix graphical isolinux (#457144) (katzj)- use newer mke2fs arguments for different filesystems (sandeen)- Use attributes to tell us whether filesystems are bootable (#457037). (clumens)- Make sure we drag in gzip, used by the image creation stuff. (jkeating)
* Fri Jul 25 2008 Chris Lumens - 11.4.1.20-1- Clean up some mistakes in the minstg2 removal. (dcantrell)- Fix passing the language to anaconda (katzj)
* Thu Jul 24 2008 Chris Lumens - 11.4.1.19-1- Fix another NFS kickstart segfault (#456461). (clumens)- Remove support for generating a minstg2.img image. (dcantrell)- If the xconfig command is given, do something with it (#455938). (clumens)- METHOD_CDROM is now supported on s390 (jgranado). (clumens)- Fix test for if we could access stage2.img on the CD (wwoods).- Look for updates.img and product.img on the boot.iso. (clumens)- Suspend the curses interface before calling scripts and resume afterwards (#435314) (msivak)
* Wed Jul 23 2008 Chris Lumens - 11.4.1.18-1- MD_NEW_SIZE_BLOCKS no longer exists in newer kernel headers. (clumens)
* Wed Jul 23 2008 Chris Lumens - 11.4.1.17-1- Add support for filing bugs straight into bugzilla. (clumens)- Running git-tag -f from a makefile rule is a bad idea (katzj)- A text message in rescue.py is not gettext-ized (atodorov)- Code cleanup - handling of --serial (atodorov)- Offer physical NIC identification in stage 1 (#261101) (dcantrell)- Specify a default cio_ignore parameter for s390x (#253075) (dcantrell)- Fix getting the stage2 image when doing kickstart installs. (clumens)- Convert package names to unicode before displaying the error message (#446826). (clumens)- When there is text mode specified in the kickstart file, disable the vnc question (#455612) (msivak)- We no longer add the fstype to the hd: method in loader. (clumens)- Check DHCP by default on the text network configurator screen. (clumens)- Support booting from FCP-attached CD/DVD drive on s390 (#184648) (dcantrell)
* Thu Jul 17 2008 Chris Lumens - 11.4.1.16-1- Support xdriver= again (katzj)- Fix loadkeys on serial console (niels.devos)- don\'t change from cmdline to textmode on lowmem systems (niels.devos)- Update the VNC over text mode patch, so it correctly passes the password to VNC server (#455612) (msivak)- Set interface MTU if user specified mtu= param (#435874) (dcantrell)- Bring up the network before attempting to mount the NFSISO source. (clumens)- Catch mount errors when adding NFS repos (#455645). (clumens)- Fix a traceback when trying to save exceptiona via scp. (clumens)- Give a progress bar when cleaning up after upgrades (#208725). (clumens)- Look for repo config files in /etc/anaconda.repos.d. (clumens)- baseurl should be a list, mirrorlist should not. (clumens)- It\'s called crypto_blkcipher.ko these days. (clumens)
* Tue Jul 15 2008 David Cantrell - 11.4.1.15-1- Add a text-mode network config dialog so default installs can work. (clumens)- Use the right format for the NFS methodstr, but harder this time. (clumens)- Ask the user if he wants to use VNC instead of text mode (#453551) (msivak)- Fix a segfault when displaying the wrong CD message. (clumens)- Use the right format for the NFS methodstr. (clumens)- Use correct path for FAK plugins in upd-instroot (jgranado)
* Fri Jul 11 2008 Chris Lumens - 11.4.1.14-1- Remove an extra tab that was causing problems with the Iloko translation. (clumens)- Use the right stage2.img path for kickstart URL installs (#452140). (clumens)- Convert package errors to unicode before displaying them (#441200). (clumens)- Display a status message while waiting for the CD to become ready. (clumens)- Fix window title to be the same as all others. (clumens)- In cmdline mode, give some feedback when transferring loader files. (clumens)- If network config info isn\'t provided for cmdline, abort. (clumens)- If we\'re not given a method in cmdline mode, we have to quit. (clumens)- In cmdline mode, set language to the default if none is provided. (clumens)- Don\'t stop on the method screen if stage2= is provided. (clumens)- Add support for NFS to the repo editor (#443733). (clumens)- Fix whitespace silliness. (pjones)- Fix closing the drive door so that if the kernel happens to start giving us the right error code, we\'ll handle it correctly... (pjones)- Fix the mysterious Error: OK message. (clumens)- The return value from mediaCheckCdrom is totally useless. (clumens)- Add better error handling when initializing yum (#453695). (clumens)- Add functions for creating repos as well. (clumens)- Don\'t handle all possible exceptions as if they were repo errors. (clumens)- Reorganize to make it easier to reset the \"base\" repository. (clumens)- Remove the pkgSack when a repo is disabled. (clumens)- Use the new method of calling the NetworkConfigurator. (clumens)- Add an updated repo editor. (clumens)- Don\'t suggest text mode to the poor, poor user. (pjones)
* Wed Jul 09 2008 Chris Lumens - 11.4.1.13-1- Filter out source and debuginfo repos from the UI. (clumens)- Add the MD5 sum to the boot.iso to avoid errors in loader (#453698). (clumens)- Don\'t strip too much off the NFS directory path. (clumens)- Log stage2 url better. (pjones)- Fix minor whitespace nits. (pjones)- Use %m rather than strerror() where appropriate. (pjones)- Make setupCdrom() actually return the path to the stage2 image it found. (pjones)- Don\'t unconditionally pass --lang for live installs (#454101) (katzj)- Set up rhgb for plymouth on live. And conditionalize rhgb + runlevel 5 (katzj)- Set up rhgb if plymouth is installed as well as rhgb (katzj)- Get the math right on how many usec per second... (pjones)- Import missing module \"network\". (pjones)- Wait up to 45 seconds for \"No medium found\" to stop happening (pjones)
* Thu Jul 03 2008 Peter Jones - 11.4.1.12-1- Add dmraid-libs to PACKAGES so new dmraid won\'t break installs.
* Thu Jul 03 2008 Peter Jones - 11.4.1.11-1- Fix double free in setupCdrom- Fix missing psudo->pseudo spelling fix (katzj, #453843)- Include missing X libraries in stage2.img
* Tue Jul 01 2008 Chris Lumens - 11.4.1.10-1- Remove old livecd flag (katzj)- Explicitly setup livecd install by passing --liveinst to anaconda (katzj)- Check return value of asprintf() consistently (dcantrell)- Per strtol(3) man page, set errno=0 before call. (dcantrell)- Rescue mode no longer needs access to a methodstr (#453044). (clumens)- Use strtol() instead of atoi() (dcantrell)- Spell pseudo correctly. (pjones)
* Wed Jun 25 2008 Chris Lumens 11.4.1.9-1- Query for anaconda rather than anaconda-runtime in buildinstall (jkeating).
* Mon Jun 23 2008 Jeremy Katz - 11.4.1.8-1- Remove from being installed too (katzj)- Remove anaconda-runtime as a separate subpackage (katzj)- Remove the stuff we\'re not calling. (pjones)- Remove this since we don\'t use it anymore (katzj)- Don\'t continue on using the base installclass if we can\'t find one (katzj)- Get rid of wlite and unicode-lite; these were necessary to support (pjones)- Remove pkgorder and splittree; these should be in pungi (katzj)- Add the .treeinfo file into the exception report. (clumens)- Fix a typo (#452140). (clumens)
* Fri Jun 20 2008 Chris Lumens - 11.4.1.7-1- Remove ancient block of code to upgrade Netscape Communicator. (clumens)- Move enableNetwork into the interface. Bring network up for scp. (clumens)- If we can\'t mount for some reason, don\'t traceback (#452159). (clumens)- Fix the upgrade button traceback (#374891). (clumens)
* Wed Jun 18 2008 Chris Lumens - 11.4.1.6-1- Enable media check again, and let it check the boot.iso. (clumens)- Substitute the version from buildstamp for $releasever if needed. (clumens)- Remove the askmethod cmdline option. (clumens)- Lots of work to make loader only look for stage2.img, and stage2 do all the install method configuration. (clumens)- Add the --stage2= and --repo= options, deprecate --method=. (clumens)- Fix pkgorder to include deps of kernel early. (pjones)- Deal with udev losing udevcontrol/udevtrigger (katzj)- Boot in graphical mode if /usr/bin/kdm exists. (clumens)- bootProto isn\'t a global variable (#451689). (clumens)
* Fri Jun 13 2008 Chris Lumens - 11.4.1.5-1- Add a mirrorlist option. (jkeating)- Don\'t display garbage when prompting for the updates device. (clumens)- Don\'t write out yum repo config files in kickstart.py. (clumens)- It doesn\'t make sense to insert a disk into a partition, so don\'t ask. (clumens)- Unmount /mnt/sysimage/dev manually since it doesn\'t get an entry. (clumens)- Link ld-linux.so.2 to ld-
*.
*.
*.so (dcantrell)- Quote the repo name in anaconda-ks.cfg in case it includes spaces. (clumens)- Move all the exception classes into a single file. (clumens)- And import iutil a the end as well. (clumens)- Don\'t display obsoleted packages in the UI. (clumens)
* Thu Jun 05 2008 Chris Lumens - 11.4.1.4-1- Fix text mode button translations (#450176). (clumens)- Remove a rogue call to textdomain. (clumens)- Make \"upd-updates /tmp/updates.img\" update everything newer in the current (pjones)- _xmltrans is undefined. Try xmltrans instead. (clumens)- Fix reference to cost vs. priority (#450168). (clumens)- Don\'t do the \"exec shell on tty1\" thing in vnc if we\'ve got virtual terminals. (pjones)- Import N_ (#450163). (clumens)- raise \"NotImplementedError\", not \"NotImplemented\" (pjones)- Need to import iutil before we use it. (clumens)- Don\'t reference PartitioningError.value . (pjones)
* Wed Jun 04 2008 Chris Lumens - 11.4.1.3-1- Can\'t reference iutil.whatever from inside iutil.py. (clumens)- When using the boot.iso and URL installs, download the .treeinfo file. (clumens)- Fix a couple typos in the getArch commit. (clumens)- Be consistent with data type. (dcantrell)- Replace rhpl.getArch() calls with iutil calls. (dcantrell)- Expand iutil.isX86() and added iutil.getArch() (dcantrell)- Add isAlpha() test function to iutil. (dcantrell)- Create architecture test functions in iutil (dcantrell)- Removed mystrstr() function in loader2/init.c (dcantrell)- Don\'t support Arabic in text mode installs since we don\'t even do RTL. (clumens)- Removed old strace debugging in loader2/init (dcantrell)- Keep only one copy of this code for group sorting/display around (katzj)- Stop using rhpl.translate and use gettext directly (katzj)- Add a descriptive comment to the top of /etc/fstab (#448966). (clumens)- Use \"message\" instead of \"value\" on errors, and stringify on the front side. (pjones)- Translate package descriptions (#449455). (clumens)- Translate password error messages (#439981). (clumens)- Fix traceback starting vnc (#449295) (katzj)- Add Hewbrew to lang-table (oron)- Fix errors in python string formatting (#449130). (clumens)
* Thu May 29 2008 Chris Lumens - 11.4.1.2-1- Allow ext4 migration again for testing at least (katzj)- Remount filesystems after migration (#440055) (katzj)- Add blkid to the keepfiles list so jkeating will whine less (pjones)- Don\'t allow vfat /boot (katzj)- Use the base yum doConfigSetup method. (clumens)- Include the yum repo files from fedora-release in stage2. (clumens)- No longer maintain our own list of extra repos. (clumens)- Sort the repos in the UI. (clumens)- Add cost, includepkgs, and excludepkgs to the ks repo objects (#448501). (clumens)- Stop pretending to support Greek text mode (#208841) (katzj)- Make it clear you need to reboot to use the installed system (#238297) (katzj)- Activate LVM for when we do meta-resizing (#441706) (katzj)- List Norweigian as Bokmål (#437355) (katzj)- Simplify the install classes. (clumens)- Don\'t show the EFI filesystem unless we\'re on an EFI platform (katzj)- Add nfsv4 so that we don\'t nuke them on upgrades (#448145) (katzj)- When there are errors reading the live CD, offer a retry. (clumens)- Can\'t recover from buildTransaction errors on a per-repo basis (#447796). (clumens)- Set default partition size to 200 MB in the custom partitioning UI. (clumens)- Limit the size of things in exception dumps to 1k. (clumens)- Catch IOErrors one place they seem to happen most. (clumens)- Add a unique user agent for anaconda\'s grabbing in stage2 (katzj)- Remove text mode help support as well. (clumens)- Check for all the non-mkfs utilities required for each filesystem type. (clumens)- More partitioning error handling fixes (#446453). (clumens)- Require cracklib-python for the rootpassword screen. (notting)- Use pykickstart\'s deprecated versions of the xconfig and monitor classes. (clumens)- Fix tyop in upgrade migrate screen (#446363) (katzj)
* Tue May 13 2008 Jeremy Katz - 11.4.1.1-1- Just call the XStartupCB() function directly and randr to the desired resolution (katzj)- Stop writing out an xorg.conf (katzj)- Make the \"dump to removable device\" option work in anaconda. (jgranado)
* Mon May 12 2008 Jeremy Katz - 11.4.0.79-1- Stop neutering DRI (notting)- make scripts/buildinstall take multiple repos (wwoods)- Don\'t worry about telling people that interactive text mode is in wrong lang (katzj)- Allow cpio updates.img in the tree for URL installs. (dlehman)- Declare unpackCpioBall for use from within urlinstall.c. (dlehman)- Don\'t unlink an image we retrieved but could not mount as it could be .cgz. (dlehman)- Don\'t run lspci with an explicit path (katzj)- Include lspci on all images (#445974) (katzj)- Add support for attaching gdbserver to the loader early on. (clumens)- Add virtio max partition count (markmc)- Sort virtio devices first (markmc)- Merge branch \'master\' of ssh://git.fedorahosted.org/git/anaconda (andrewm)- 2008-05-08 Andrew Martynov * Mon Apr 28 2008 David Cantrell - 11.4.0.78-1- Write per-interface DNS info to ifcfg files (#443244) (dcantrell)- Clean up sanityCheckHostname() in network.py (dcantrell)- Activate autorepeat for GUI installs. (jgranado)
* Fri Apr 25 2008 David Cantrell - 11.4.0.77-1- Preserve \'set the hostname\' setting when going Next/Back (#443414) (dcantrell)- Avoid traceback on network configuration screen (#444184) (dcantrell)- Add missing backslashes for the .profile here document. (dcantrell)- Label the efi boot filesystem on ia64 as well. (pjones)- Don\'t use size to determine if a partition is an EFI system partition; instead, (pjones)- Handle the DVD having a disknumber of ALL. (443291) (jkeating)- Make the LUKS passphrase prompt fit on an 80x25 screen. (#442100) (dlehman)- Don\'t dd the image from /dev/zero _and_ use \"mkdosfs -C \" (pjones)- label the filesystem in efidisk.img so that HAL and such won\'t try to mount it. (pjones)- fix testiso Makefile target - boot.iso, not netinst.iso (wwoods)
* Thu Apr 24 2008 Chris Lumens - 11.4.0.76-1- Use the execWithCapture wrapper to be consistent. (jgranado)- Call the mdadm with full path. (jgranado)- Use the correct ls(1) alias. (dcantrell)- Set PS1 and ls(1) alias for tty2 shell. (dcantrell)- Lookinig for the capabilities file in xen is valid in more cases. (jgranado)- Avoid putting virtualization option when in Xen or VMware. (#443373) (jgranado)- If the stage2 image is on a CD, don\'t bother copying it (#441336). (clumens)- Once we\'ve found the stage2 media on CD, always use it (#443736). (clumens)- Change mount point for CD to /mnt/stage2 when looking for stage2 (#443755). (clumens)- Switch to using \'yum clean all\' to clean up after preupgrade (#374921) (katzj)- Handle .utf8 vs .UTF-8 (#443408) (katzj)- Avoid dividing by zero (#439160) (katzj)- Changes related to BZ #230949 (dcantrell)- $XORGDRIVERS no longer exists (markmc)- Bump version. (katzj)- Write IPv6 values to /etc/sysconfig/... correctly (#433290) (dcantrell)- Use the right base class for autopart handler. (clumens)
* Fri Apr 18 2008 Jeremy Katz - 11.4.0.75-1- Listing the directories before expiring yum caches helps (katzj)
* Fri Apr 18 2008 Jeremy Katz - 11.4.0.74-1- Don\'t look for .discinfo on the rescue CD (#442098). (clumens)- Use /var/cache/yum as the cachedir since /tmp might be too small (#443083). (clumens)- Revert \"Don\'t look for a .discinfo file in rescue mode (jvonau, #442098).\" (clumens)- Revert \"Fix figuring out that the CD has stage2 on it and should be mounted.\" (clumens)- We\'ve always expected devices to be strings, not unicode (#443040) (katzj)- Resizing lvs on top of RAID fails, make the error not a traceback (katzj)- Don\'t put an extra slash on the error message (jgranado)- Kernel changed howw the uevent API works for firmware loading
*AGAIN
*. (pjones)- Expose the log file descriptors so fwloader can avoid closing them (pjones)- Minor UI tweaks to passphrase dialogs (katzj)- Nuke preupgrade cache once we\'re done (#442832) (katzj)- Support bringing up the network if needed with preupgrade (#442610) (katzj)- Use a real GtkDialog instead of some crazy hacked up dialog (katzj)- Fix handling of pre-existing raids for the upgrade/rescue case (#441770) (katzj)- Add missing / (Doug Chapman, #442751) (katzj)
* Wed Apr 16 2008 David Cantrell - 11.4.0.73-1- Fix figuring out that the CD has stage2 on it and should be mounted. (clumens)- Don\'t copy the stage2 image on NFS installs (#438377). (clumens)
* Tue Apr 15 2008 Jeremy Katz - 11.4.0.72-1- Don\'t use megabytes for the livecd size for copying. (notting)- find moved (katzj)- Fix up silly syntax error that crept in to this commit (katzj)- Back to using the raw version of the docs (#442540) (katzj)- Expire yum caches on upgrade (#374921) (katzj)- Include KERNEL== in udev rules (#440568) (dwmw2)- Don\'t look for a .discinfo file in rescue mode (jvonau, #442098). (clumens)- Slower machines may take more than five seconds for hal to start (#442113) (katzj)- Pass the full device path (notting)- Only include the parts of grub that will work without crazy tricks (#429785) (katzj)
* Thu Apr 10 2008 Peter Jones - 11.4.0.71-1- Fix destdir handling in upd-kernel (markmc)- Get rid of module ball remnants in mk-images (markmc)- Make upd-kernel handle version numbers the way we do them now (markmc)- Fix ia64 kernel path problems (katzj, #441846)- Don\'t tag more than one partRequest with mountpoint=/boot/efi (pjones)- Don\'t treat tiny disks as EFI System Partitions during autopart (pjones)
* Thu Apr 10 2008 Chris Lumens - 11.4.0.70-1- ide-cd_mod, not ide-cd_rom (thanks to jwb) (katzj)
* Wed Apr 09 2008 Peter Jones - 11.4.0.69-1- Ignore some warnings copying into /etc and /var (clumens)- Try to mount the NFS source in the loader to verify it is correct (clumens)- Be as clean as possible when looking for files/directories (jgranado, #431392)- More ia64 kernel finding fixage (katzj, #441708)- Fix read permissions on efidisk.img (pjones)- Use the mount flags passed to isys.mount() (pjones)
* Wed Apr 09 2008 Peter Jones - 11.4.0.68-2- Fix device-mapper dep.
* Tue Apr 08 2008 Peter Jones - 11.4.0.68-1- Handle EFI partitions somewhat better (pjones)- Fix typo in mk-images.efi\'s parted usage (pjones)
* Tue Apr 08 2008 Jeremy Katz - 11.4.0.67-1- Set the initial state of the auto-encrypt checkbutton (#441018) (katzj)- Don\'t treat RAID devices as \"disks\" to avoid lots of odd behavior (#438358) (katzj)- Log a message if we disable selinux on upgrade (katzj)- Build efiboot.img on x86_64 and i386 . (pjones)- When splitting srpms, only link srpms, nothing else. (jkeating)- Don\'t cause the text to flicker between installed packages. (clumens)- Don\'t cause the screen to jump up and down between packages (#441160). (clumens)- Fix zooming and centering in the timezone screen (#439832). (clumens)- Handle ia64 kernel path (katzj)- And add nas to the list (#439255) (katzj)- Set parent so that the dialog centers (#441361) (katzj)- Don\'t show the label column (#441352) (katzj)- Do string substitution after we\'ve translated (#441053) (katzj)- Set domain on glade file so translations show up (#441053) (katzj)- fix compression of modules (notting)- More build fixing due to translation breakage. (katzj)- Add code to create efiboot.img on i386 and x86_64 (pjones)- Remove gnome-panel too, it\'s no longer multilib. (jkeating)- Fix raising new NoSuchGroup exception. (clumens)- remove debugging print (notting)- Support encrypted RAID member devices. (#429600) (dlehman)- No longer require Amiga partitions on Pegasos (dwmw2)- Don\'t copy the stage2 image every time or on the way back. (clumens)- Make lukscb.get_data(\"encrypt\") always return a valid value. (pjones)- Set the scrollbar color so it doesn\'t surprise me the same way in the future. (pjones)- Translation updates.
* Sun Apr 06 2008 Jeremy Katz - 11.4.0.66-1- Another day, another broken translation commit to fix. (katzj)- Work around GL crashes in anaconda X by disabling them. (jkeating)- Clean up \"finishing upgrade\" wait window (katzj)- Stop refreshing like mad in text-mode on WaitWindow.refresh() (katzj)- Avoid progress bars going off the end and making newt unhappy (katzj)- Brute force hack to avoid the number of packages overflowing (#436588) (katzj)- Revert \"Change the default level in /etc/sysconfig/init now (#440058).\" (notting)- Add gnome-applets to the upgrade blacklist, fix kmymoney2 typo. (jkeating)- Don\'t enable encryption by default (katzj)- Print our mount commands to /dev/tty5 for easier debugging. (clumens)- Change the default level in /etc/sysconfig/init now (#440058). (clumens)- Make the Back button work when asking for tcp/ip information in loader.c. (#233655) (jgranado)- Have work in the network configuration stage (#250982) (jgranado)- Use a better test to see if a package group doesn\'t exist (#439922). (clumens)- avoid behavior in (#208970) (jgranado)- Correctly label the xen images in the .treeinfo file (jgranado)- Translation updates
* Wed Apr 02 2008 Chris Lumens - 11.4.0.65-1- Only do verbose hal logging if loglevel=debug (katzj)- Avoid AttributeError in HardDriveDict (#432362) (pjones)- Don\'t use %n with gettext to avoid segfaults (#439861) (katzj)- Require live installs to be to an ext2 or ext3 filesystem (#397871) (katzj)- Don\'t allow migrations to ext4 for now (katzj)- Change ext4 parameter to ext4, not iamanext4developer (katzj)- Bootable requests can not be on logical volumes (#439270). (clumens)- Don\'t allow /boot to be migrated to ext4 (#439944) (katzj)- Fix for ia64 (#439876) (katzj)- Update pkgorder group listings to match current Fedora defaults. (jkeating)- Lame attempt to try to avoid race condition with udev creating device nodes (katzj)- Don\'t traceback if stdout is an fd either (katzj)- iutil doesn\'t need isys anymore (katzj)- Free memory only after we\'re done using it (#439642). (clumens)- Fix a segfault freeing memory on boot.iso+hdiso installs. (clumens)
* Mon Mar 31 2008 Jeremy Katz - 11.4.0.64-1- Fix my tyop (katzj)- Fuzzy broken string again (katzj)
* Sun Mar 30 2008 Jeremy Katz - 11.4.0.63-1- Fix broken translations. Again. (katzj)
* Sun Mar 30 2008 Jeremy Katz - 11.4.0.62-1- Translation updates- Allow GPT disk labels on ppc/ppc64. (dcantrell)- Tear down the right loopback device before going to stage2. (clumens)- Don\'t pass None as stdout or stderr. (clumens)- Make sure there\'s a stdout to write to. (clumens)- Handle fstype munging in isys.readFSType instead of in various other places. (dlehman)- Fix a typo in new encrypted LV code. (dlehman)- Partitioning UI for handling of preexisting encrypted devices. (dlehman)- Support discovery of preexisting rootfs on LV. (dlehman)- Improve handling of logical volume device names when encrypted. (dlehman)- Add support for discovery of preexisting LUKS encrypted devices. (dlehman)- Add support for retrieving LUKS UUIDs. (dlehman)- Refresh po files (katzj)- Mark for translation based on feedback from translators (katzj)- Just relabel all of /etc/sysconfig (#439315) (katzj)- When dhcp is selected ensure that bootproto is set to dhcp (RPL-2301) (elliot)- Fix for test mode repo bits (katzj)- Try to make the size flow a little more for weird resolution screens (#439297) (katzj)- Add kmymoney to upgrade remove list (#439255) (katzj)
* Thu Mar 27 2008 Chris Lumens - 11.4.0.61-1- Fix broken translation. (clumens)
* Thu Mar 27 2008 Chris Lumens - 11.4.0.60-1- Have a fallback empty description for devices (#432362) (katzj)- os.path.join does not work the way we think it should. (clumens)- Remove the stage2 in all cases now that we\'re copying it basically all the time (katzj)- Add support for saving the exception to a local directory for live installs (katzj)- Catch errors on resize and present a dialog to the user (katzj)- Save resize output to a file (/tmp/resize.out) so that it\'s more useful (katzj)- Make sure we give the command that\'s run on stdout so that it\'s logged (katzj)- more mouse-related removals (notting)- Fix up autopart resizing for the multiple partitions to resize case (katzj)- Fix up the case where both method= and stage2= are given (katzj)- Remove mouse screens that haven\'t been used in 4 years (katzj)
* Wed Mar 26 2008 Chris Lumens - 11.4.0.59-1- Only remove duplicate slashes from the front of the prefix. (clumens)- Ensure that we take into account new repos (katzj)- Handle kernel variants a little better at install time too (katzj)- Make a little bit more future proof for kernel version changing (katzj)- Add confirmation of closing the installer window (#437772) (katzj)- Fix SIGSEGV on all mounts without options (katzj)- Add support for encrypted logical volumes in kickstart. (clumens)- Add support for encrypted LVs. (dlehman)- Put in some handling for redundant method calls and devices containing \'/\'. (dlehman)
* Tue Mar 25 2008 Jeremy Katz - 11.4.0.58-1- Fuzzy broken string (katzj)
* Tue Mar 25 2008 Jeremy Katz - 11.4.0.57-1- Use anaconda-upgrade dir in the preupgrade case (katzj)- Have \'preupgrade\' key doing an upgrade (katzj)- Fix what we expect to be the message from ntfsprogs (katzj)- Fix up compile error for new newt (katzj)- Don\'t traceback if we have little freespace partitions (#438696) (katzj)- Translation updates (ko, ru)
* Mon Mar 24 2008 Jeremy Katz - 11.4.0.56-1- Translation updates (hi, fr, kn, de, ml, es, mr, ko, te)- Fix up more unicode shenanigans (#437993) (katzj)- Move /tmp/stage2.img to /mnt/sysimage to free up some memory (#438377). (clumens)- Be a little smarter about downloading repo metadata (#437972). (clumens)- Make sure that devices are set up before using them. (#437858) (dlehman)- Don\'t prepend /dev/ on bind mounts either. (clumens)- Use the repo name instead of id in the group file error message (#437972). (clumens)- Handle /dev being on hard drive devices in the second stage (katzj)- Fix the build (katzj)- The units for /sys/block/foo/size aren\'t bytes. Fixes finding some disks (katzj)- Remove the check for .discinfo on URL installs. (clumens)- Always unmount /mnt/source on hdiso installs before starting stage2. (clumens)- Always unmount /mnt/source on nfsiso installs before starting stage2. (clumens)- Make sure the first disc image is mounted before setting up repos. (clumens)- Fix $UPDATES for real (katzj)- Avoid piling up slashes in the UI when retrying (#437516). (clumens)- Require comps-extras now that we don\'t require pirut bringing it in (notting)- Put \"ide-cd_mod\" in the list of modules to pull in. (pjones)
* Tue Mar 18 2008 Chris Lumens - 11.4.0.55-1- Fix format of method=hd: parameter (#438075). (clumens)- Work on support for NFSISO installs when using boot.iso. (clumens)- If a file doesn\'t exist, don\'t continue trying to loopback mount it. (clumens)- Make loopback mount error messages more useful. (clumens)- Focus root password entry box (#436885). (dcantrell)- Fix a traceback writing out the method string for hdiso installs. (clumens)- Fix use of sizeof on a malloc()\'d char
*
* (pjones)- Fix up ppc boot check (#438005) (katzj)- Support reading the UUID from the disk like we do with labels. (clumens)- If the protected partition is not yet mounted, mount it now. (clumens)- Don\'t add /dev/ to LABEL= or UUID= devices either. (clumens)- Use arch instead of the name again in package nevra. (clumens)- Fix traceback with preexisting LUKS partitions in setFromDisk. (part of #437858) (dlehman)
* Mon Mar 17 2008 Jeremy Katz - 11.4.0.54-1- Translation updates (de, fi, it, gu, ta, pa)- Fix a typo. (clumens)- Fix the build. (clumens)- Make sure we return the same kind of exception in all cases. (clumens)- Filter so we don\'t show LVM and RAID components when adding boot entry (#437501) (katzj)- Only print the filename we\'re fetching, as newt doesn\'t like long names. (clumens)- Fix off by one error reading .buildstamp (pjones)- Use the right path when trying to fetch .discinfo. (clumens)- Don\'t prepend /dev/ onto nfs devices. Also log mount errors to tty5. (pjones)
* Sun Mar 16 2008 Jeremy Katz - 11.4.0.53-1- Update translations (pl, de)- Use i586 kernel (#437641) (katzj)- Give indication of success or failure for mediacheck (#437577) (katzj)- Ensure the UUID for the rootfs is random and not the same for every live image (katzj)- Make migration from ext3 -> ext4 saner on upgrade (#437567) (katzj)- Force filesystem mount options on /boot/efi . (pjones)- On HDISO installs, look for the stage2.img file in the right directory. (clumens)- Accept devices with or without a leading /dev/. (clumens)- .buildstamp no longer contains productPath, so change the default (#437509). (clumens)- Remove references to an uninitialized variable. (clumens)- Use shortname=winnt instead of shortname=win95 when mounting /boot/efi (pjones)- Do not strip leading or trailing whiltespace from passphrases. (#437499) (dlehman)- Set methodstr for nfsiso installs (#437541). (clumens)- Create and check /boot/efi correctly, and use preexisting one if available. (pjones)- Handle /boot/efi and /boot both as bootrequests (pjones)- Emit \"efi\" as /boot/efi\'s filesystem type (pjones)- Add EFI handling to the bootloader setup choices. (pjones)- Add efi to the ignoreable filesystem list. (pjones)- Add EFIFileSystem, and getMountName() to hide that it\'s really vfat. (pjones)- Add isEfiSystemPartition(), and use it where appropriate (pjones)- Call getAutoPartitionBoot with our partition list as an arg. (pjones)- Don\'t show the epoch in package selection either (#437502). (clumens)- Fix some errors on reporting which files are being downloaded. (clumens)- Revert \"Handle /boot and /boot/efi separately, plus fixes\" (pjones)- Handle /boot and /boot/efi separately, plus fixes (pjones)- Get rid of unused >1024 cylindar check, fix text of boot check exceptions. (pjones)- Make bootRequestCheck() check /each/ boot partition like it\'s supposed to, (pjones)- Fix shell quoting on numbers > 9, and fix an error message. (pjones)- Don\'t show the epoch in the progress bar (#437502). (clumens)- Include efibootmgr in the instroot (pjones)
* Thu Mar 13 2008 Chris Lumens - 11.4.0.52-1- Don\'t unmount NFS source so NFSISO will work. (clumens)- Fix the format of the method=hd: parameter. (clumens)- Fix creating new users in kickstart. (clumens)- \"gtk-edit\" isn\'t valid in text mode. (clumens)- Ignore LUKS headers on partitions containing RAID signatures. (#437051) (dlehman)- The xconfig command with no X running doesn\'t make sense. (clumens)
* Wed Mar 12 2008 Jeremy Katz - 11.4.0.51-1- yum.remove removes installed packages, not to be installed packages (#436226) (katzj)- Make the /tmp/updates vs RHupdates code at least a little readable. (pjones)- Allow vfat update images. (pjones)- Fix syntax error (pjones)- Add a progress bar for when we\'re downloading headers (#186789). (clumens)- mount will set up the loopback device if we let it. (clumens)- Fix mounting problems with NFSISO images. (clumens)- Simplify the logic for the upgrade arch check (katzj)- Add a fallback method for determining the architecture of installed system during an upgrade (#430115) (msivak)- Avoid a traceback (#436826) (katzj)- Make sure host lookups work for manual net config (#435574). (dcantrell)
* Tue Mar 11 2008 Jeremy Katz - 11.4.0.50-1- Focus root password entry box (#436885). (dcantrell)- Make sure default is SHA-512 for libuser.conf. (dcantrell)- Fix detection of ISO images on a hard drive partition. (clumens)- Devices names aren\'t prefixed with /dev/. (clumens)- Filter out /dev/ram
* devices from the list of hdiso partitions. (clumens)- But make sure that we\'ve activated the keymap now that X follows its defaults (katzj)- Don\'t set a keyboard in the X config, we should just do this at runtime (katzj)- Writing out the nfs method line is a lot simpler now. (clumens)- Use /mnt/sysimage/tmp/cache for the yum cache, instead of the ramdisk. (clumens)- Translation updates (nl, gu, ml, mr, pa)
* Mon Mar 10 2008 Chris Lumens - 11.4.0.49-1- Use the full path to the .discinfo file (#436855). (clumens)- List netinst.iso/boot.iso in .treeinfo (#436089) (katzj)- Convinced to change the name back to boot.iso (katzj)- Only pass the file path to {ftp,http}GetFileDesc. (clumens)- Pass the correct NFS method parameter to stage2 (#436360). (clumens)- Fix logging messages to not display the hostname twice. (clumens)- Fix traceback with text mode adding iscsi (#436480) (katzj)
* Thu Mar 06 2008 Jeremy Katz - 11.4.0.48-1- Don\'t use the bits from $UPDATES unless $UPDATES exists (katzj)- Fix horkage with busybox stuff. There\'s now start-stop-daemon (katzj)- Require new enough version of yum-utils (katzj)- Pass the --archlist option to yumdownloader (jkeating)- Update pt_BR translation
* Wed Mar 05 2008 Jeremy Katz - 11.4.0.47-1- Fix the build again (katzj)
* Wed Mar 05 2008 Jeremy Katz - 11.4.0.46-1- Don\'t require some things which we fall back gracefully when not there (katzj)- Check for filesystem utilities to see if a filesystem is supported (katzj)- Write out keyboard settings before installing packages. (related to #429358) (dlehman)- Update pl translation- Make sure http:// or ftp:// is specified (#436089) (katzj)- Fix segfault when port is specified (#435219) (katzj)- Use ntfsresize -m to get minimum size (#431124) (katzj)- Use the right path to the .discinfo file when validating a tree. (clumens)
* Tue Mar 04 2008 Jeremy Katz - 11.4.0.45-1- Fix the build.
* Tue Mar 04 2008 Jeremy Katz - 11.4.0.44-1- Add --archlist to repoquery call. (jkeating)- Translation updates (pl, nl, ja)- Handle efibootmgr and grub.efi in upd-instroot. (pjones)- Merge in branch to implement stage2= parameter. (clumens)- Revert the memtest86 bits for EFI, since this gets run on multiple arches. (pjones)- Use iutil.isEfi() instead of testing for ia64-ness. (pjones)- Only do gptsync if we\'re not using EFI. (pjones)- Don\'t do gptsync if we\'re using EFI. (pjones)- Use gpt on all efi platforms. (pjones)- Rework isEfi() to be slightly more conservative. (pjones)- Test for using efi rather than arch==ia64 (pjones)- Don\'t copy memtest86 in on EFI since it won\'t work. (pjones)- Add comment regarding usage of elilo (pjones)- Free some variables so we can http GET twice if needed. (clumens)- Change the method config prompts. (clumens)- Support stage2= for CD installs in loader. (clumens)- Support stage2= for HD installs. (clumens)- Support stage2= for NFS installs. (clumens)- Support stage2= for URL installs. (clumens)- Update the method string handling for NFS and URL installs. (clumens)- mountStage2 now needs to take an extra argument for updates. (clumens)- If stage2= is given, it overrides the check for a CD stage2 image. (clumens)- Support the stage2= parameter, and add a flag for it. (clumens)
* Mon Mar 03 2008 Jeremy Katz - 11.4.0.43-1- Only use UUID= for devices we would have labeled. Related to #435228 (katzj)- If we don\'t find a kernel package, then give a better error (katzj)- Translation updates (cs, de)
* Sun Mar 02 2008 Jeremy Katz - 11.4.0.42-1- Fix a traceback when we have an error. Related to #433658 (katzj)- Add virtio_pci in hopes of getting virtio working (katzj)- Pull in the bits of pirut that we use so that we don\'t depend on pirut (katzj)- Default to RAID1 instead of RAID0 (#435579) (katzj)- Refresh po (katzj)- Fix traceback leaving task selection screen (#435556) (katzj)- More ext4 vs ext4dev nonsense. (#435517) (katzj)- Fix reverse name lookup. (pjones)
* Thu Feb 28 2008 Jeremy Katz - 11.4.0.41-1- Don\'t write out /etc/rpm/platform anymore. (katzj)- anaconda-runtime now needs yum-utils (katzj)- Add \'testiso\' target (katzj)- Remove rescue cd creation scripts (katzj)- Take --updates with location of additional updates beyond the package set used (katzj)- Change the ISOs we build (katzj)- Take advantage of yum repos being available (katzj)- Allow recovery from some missing repodata conditions. (clumens)- Rework the repo editor screen to be more modular. (clumens)- Move doPostImages to be run after the second stage build (katzj)- Ensure that group info for txmbrs is accurate after we reset (katzj)- Fix backwards logic for yum verbosity (katzj)- No more arc (#435175) (katzj)- Remove an unused method. (clumens)
* Tue Feb 26 2008 Jeremy Katz - 11.4.0.40-1- Use non-deprecated HAL properties. (notting)- More crud to deal with the fact that rawhide trees are composed weird (katzj)- Gtk does not have the error type, use custom with proper icons. (#224636) (msivak)
* Mon Feb 25 2008 Jeremy Katz - 11.4.0.39-1- Fix up symlinks that could be broken with our movement here (#434882) (wwoods)- pvops xen uses hvc as its console (#434763) (katzj)- Follow symlinks when looking for the anaconda-runtime package. (jkeating)
* Sun Feb 24 2008 Jeremy Katz - 11.4.0.38-1- Write out UUID in the fstab (#364441) (katzj)- Add support for getting UUID using libblkid (katzj)- Fix calculation of sizes of LVs when resizing (#433024) (katzj)- Add back some bits for text mode (katzj)- Remove advanced bootloader bits (katzj)- Add support for actually changing where the boot loader gets installed as well (katzj)- Less text. (katzj)- Reorder things a little, clean up spacing (katzj)- Use a tooltip instead of a long bit of text that most people don\'t read (katzj)- Remove advanced checkbox (katzj)- Switch the grub installation radio to be a checkbutton. Cleanups for grub only (katzj)- Lets redirect to /dev/null to ensure that what we get in DIR is the result of pwd. (jgranado)- Catch the error emmited by lvm tools during logical volume creation process (#224636). (msivak)- Don\'t try to lock /etc/mtab, fix error detection when mount fails. (clumens)- Don\'t append (null) to the NFS mount options. (clumens)- There\'s no need to wait if the last download retry failed. (clumens)- the \'-o\' is appended to the mount command in imount.c (jgranado)- Use full path to device for mount in findExistingRootPartitions. (dlehman)- Map preexisting encrypted devs before mounting everything in mountRootPartition. (dlehman)- Fix traceback on test mount in findExistingRootPartitions. (dlehman)- Use SHA-512 by default for password encryption. (dcantrell)- Clean up root password user interfaces. (dcantrell)
* Tue Feb 19 2008 Chris Lumens - 11.4.0.37-1- Default to the right timezone when language is changed (#432158). (clumens)- Fix another text mode network config traceback (#433475). (clumens)- More scripts cleanups. (jgranado)- Remove more references to ARC (#433229). (clumens)- Mount flags should be an optional argument (#433279, #433280). (clumens)- We don\'t need productpath anymore, so stop taking it as an option (katzj)- Set yum output level based on whether or not we\'ve passed --debug or not (katzj)- Clean up invocation of mk-images from buildinstall (katzj)- Clean up invocation of upd-instroot from buildinstall (katzj)- Remove some legacy stuff that\'s no longer relevant from .discinfo/.treeinfo (katzj)- Don\'t depend on product path for finding the anaconda-runtime package (katzj)- Make buildinstall a little clearer (katzj)- Use $LIBDIR instead of lib globbing to avoid problems with chroots (katzj)- Add some error handling around populateTs. (clumens)
* Thu Feb 14 2008 David Cantrell - 11.4.0.36-1- Fix up firmware inclusion. This didn\'t actually ever work. (katzj)- Fix up the groff related stuff for man pages to be done in the correct place (katzj)- remove yumcache (katzj)- Don\'t do fixmtimes anymore (katzj)- Don\'t compress translations (katzj)- Don\'t manually duplicate things from package %post scripts (katzj)- Remove some unused options (--discs and --buildinstdir) (katzj)- Keep /etc/nsswitch.conf and /etc/shells (katzj)- Stop forcing passive mode for FTP by patching urllib (katzj)- We don\'t use timezones.gz anymore anywhere (katzj)- We shouldn\'t need to remove files that are only in -devel packages (katzj)- Remove some obsolete files from the list to clean up noise in the output (katzj)- We want nss bits on all arches these days (katzj)- Just use default /etc/nsswitch.conf and /etc/shells (katzj)- alpha should have translations probably (katzj)- Remove some things that aren\'t used anymore (katzj)- Don\'t run pkgorder as a part of buildinstall anymore (katzj)- Remove duplicate file from the file lists (katzj)- Don\'t use the static versions of these anymore as they\'re likely to go away (katzj)- Remove weird s390 hack that shouldn\'t be needed any more (katzj)- Make makebootfat less noisy (katzj)- Get rid of dangling fobpath stuff; now that we\'re not mounting to create (katzj)- Ignore .bak files created by glade (katzj)- Get rid of duplication for yaboot stuff to make scripts less noisy (katzj)- Correct internationalization of exception handler text (msw)- More fixing of mount paths (#432720) (katzj)- securitylevel -> firewall in the spec file. (clumens)- Include util-linux-ng, which contains mount (#432720). (clumens)- When mounting stage2 on loopback, add -o loop to mount opts. (clumens)
* Tue Feb 12 2008 Jeremy Katz - 11.4.0.35-1- Fix the build (katzj)
* Tue Feb 12 2008 Jeremy Katz - 11.4.0.34-1- Handle modules with more than one description (#432414) (katzj)- Finish HDISO installs, at least for DVDs (#431132). (clumens)- Move migration to before mounting filesystems (katzj)- Fix silly thinko in Eric\'s patch (katzj)- Allow ext3->ext4 upgrades (sandeen)- Do the man pages in rescue mode the right way. (jgranado)- Merge branch \'master\' of ssh://git.fedorahosted.org/git/anaconda (notting)- Use /etc/adjtime as the configuration file for UTC/not-UTC. (notting)- Remove all our own mount code. (clumens)- Use the mount program instead of our own code. (clumens)- Add the real mount programs to stage1. (clumens)- Use the correct variables to get the ipv6 info. (#432035) (jgranado)- Update error messages to match function names. (dcantrell)- Rename nl.c to iface.c and functions to iface_
* (dcantrell)- In rescue mode, show interface configuration (#429953) (dcantrell)- Add qla2xxx firmware (#377921) (katzj)- Rename base repo (#430806). (clumens)- Remove dep on anaconda from pkgorder (katzj)- Remove no longer used dumphdrlist script (katzj)
* Thu Feb 07 2008 Jeremy Katz - 11.4.0.33-1- Fix error message on continuing after changing cds with mediacheck (katzj)- Fix the progress bar during mediacheck (#431138) (katzj)- Ensure we disable SELinux if the live image isn\'t using it (#417601) (katzj)- Correct nl_ip2str() cache iteration. (dcantrell)- Check the fstype of the live image (katzj)- Check for device existence rather than starting with /dev (katzj)- The FL_TEXT flag has no reason to be here. (#207657) (jgranado)- Don\'t traceback when getLabels is called with DiskSet.anaconda set to None. (dlehman)- Pass arguments correctly to anaconda (katzj)- Cancel on escape being pressed with autopart resizing (katzj)
* Wed Feb 06 2008 Chris Lumens - 11.4.0.32-1- Make passwordEntry appear on the exn saving screen. (clumens)- Don\'t allow disabling default repositories. (clumens)- Make loopback device purposes line up with what stage2 expects. (clumens)- Fix methodstr handling for hdiso installs (#431132). (clumens)- Remove our own DNS functions, since glibc\'s are available now. (clumens)
* Tue Feb 05 2008 Chris Lumens - 11.4.0.31-1- Copy over repodata from media after the install is done (#381721) (katzj)- Add resizing support in autopartitioning (katzj)- Fix test mode with python-fedora installed (katzj)- Add support for encrypted devices in rescue mode (dlehman).- Allow creation of LUKSDevice with no passphrase. (dlehman)- Fix hdiso installs in loader and in methodstr (#431132). (clumens)- Avoid infinite loop in nl_ip2str(). (dcantrell)- Force users to set a hostname (#408921) (dcantrell)- Forward-port RHEL-5 fixes for s390x issues. (dcantrell)- fsset.py tweaks for ext4dev & xfs (sandeen)- When editing the raid partitions show raid memebers. (#352721) (jgranado)- mdadm to create the mdadm.conf (#395881) (jgranado)
* Wed Jan 30 2008 David Cantrell - 11.4.0.30-1- Initialize int in doConfigNetDevice() to fix compiler warnings. (dcantrell)
* Wed Jan 30 2008 David Cantrell - 11.4.0.29-1- Handle putting updates ahead of anaconda in the updates= case too. (clumens)- Make sure the device name starts with /dev (#430811). (clumens)- Revert \"Initial support for network --bootproto=ask (#401531).\" (clumens)- (#186439) handle lv names with \"-\" when doing kickstart. (jgranado)- Remove the last references to makeDevInode (#430784). (clumens)- Don\'t traceback trying to raise an exception when making users (#430772). (clumens)
* Mon Jan 28 2008 David Cantrell - 11.4.0.28-1- Go back to the method screen if back is hit on nfs config (#430477). (clumens)- Fix dmidecode dependency (#430394, Josh Boyer * Fri Jan 25 2008 Chris Lumens - 11.4.0.27-1- Fix generation of stage1 images. (notting)- Fix a typo in mk-images. (clumens)- Allow removing packages by glob now that yum supports it. (clumens)
* Thu Jan 24 2008 Chris Lumens - 11.4.0.26-1- Fix a traceback on the driver selection screen (#428810). (clumens)- Map \'nousb\', \'nofirewire\', etc. to be proper module blacklists. (notting)- Clean off leading and trailing whitespace from descriptions. (notting)- Write out /etc/rpm/platform on livecd installs. (clumens)
* Wed Jan 23 2008 David Cantrell - 11.4.0.25-1- Include new firstboot module. (clumens)- Conditionalize ntfsprogs as not all arches include it. (clumens)- Remove kudzu-probe-stub. (clumens)- Remove rogue references to kudzu. (clumens)- Add dogtail support (#172891, #239024). (clumens)- Fix some error reporting tracebacks. (clumens)
* Tue Jan 22 2008 Chris Lumens - 11.4.0.24-1- Avoid possible SIGSEGV from empty loaderData values. (dcantrell)- Do not require glib2-devel for building. (dcantrell)- Use libnl to get interface MAC and IP addresses (dcantrell)- Don\'t refer to the libuser.conf when creating users (#428891). (clumens)- pcspkr works (or isn\'t even present), per testing on #fedora-devel (notting)- Inline spufs loading for ppc. (notting)- Load iscsi_tcp, so that iSCSI actually works (notting)- inline ipv6 module loading (notting)- If we execWith a program, require the package containing it. (clumens)- Add a repository editor. (clumens)- Add the default repo to the UI so it can be edited later. (clumens)- Fix non-latin-1 locale display in the loader. (notting)- Make sure anaconda has precedence in the search path (#331091). (clumens)- When starting RAID arrays, the device node may not already exist. (notting)- Fix a typo that\'s breaking kickstart network installs. (clumens)- Don\'t allow backing up to partitioning (#429618). (clumens)- Update font paths. (clumens)
* Mon Jan 21 2008 David Cantrell - 11.4.0.23-1- Try to fix a problem creating users via kickstart (#428891, clumens)- Fix a loader segfault doing kickstart nfs installs (clumens)- Move more interactive steps ahead of partitioning (clumens)- If we can\'t possibly add advanced devices, don\'t offer it (#429210, clumens)- Don\'t flush after rescanning so recently attached disks are available (clumens)- If bootproto is dhcp, unset any static settings (#218489, dcantrell)- Add some groups to pkgorder to make the CDs come out right (pjones)- Fix traceback when using non-encrypted RAID (notting)- Complete the patch for dhcptimeout (#198147, #254032, msivak)
* Wed Jan 16 2008 David L. Cantrell Jr. - 11.4.0.22-1- Require the latest libdhcp (dcantrell)- Don\'t set currentMedia when we\'re on a network install (#428927, clumens)- Don\'t offer two reboot options (clumens)- Remove fsopts that are already defaults (#429039, clumens)- Remove isofs module to get rid of a FATAL message (clumens)- Add the crc32c kernel module for iscsi (#405911, clumens)- Add MAC address to the network device selection screen (#428229, clumens)- Initial support for network --bootproto=ask (#401531, clumens)- Remove an extra newline (clumens)- Add firstaidkit to the rescue image (jgranado)- Fix the progress bar to hit 100% on the last package (#428790, clumens)- Add some output so the startup delay doesn\'t seem quite so long (clumens)- Initial kickstart support for encrypted partitions (clumens)
* Mon Jan 14 2008 David Cantrell - 11.4.0.21-1- Inherit from the right versions of pykickstart classes (clumens)- Update for nss files moving to /lib (clumens)- Remove unneeded arguments from detectHardware function (notting)- Symlink all udev support binaries to udevadm (notting)- /sbin/restorecon on /etc/modprobe.d (notting)- Add the kickstart syntax version to the kickstart file (clumens)- Require latest libdhcp to fix x86_64 SIGABRT problems
* Sun Jan 13 2008 Chris Lumens - 11.4.0.20-1- Install new udev paths so HAL can talk to it (notting)- Also get DSO deps for setuid binaries (like X). (clumens)- Fix a bunch of pychecker errors. (clumens)
* Fri Jan 11 2008 Chris Lumens - 11.4.0.19-1- Make sure the arch is listedat the top of all loader screens. (clumens)- Add the version number really early in the log file too. (clumens)- Require latest libdhcp (dcantrell)- Add nicdelay parameter to loader, so we can wait before sending DHCP requests. (msivak)- Add dhcpdelay to loader so we can modify the default dhcp timeout (#198147, #254032). (msivak)- Fix the selected device when disabling entries in Add advanced drive dialog. (#248447) (msivak)- Include mkfs.gfs2 (#356661). (clumens)- Use the new default Japanese font (#428070). (clumens)- More urlinstall loader fixes. (clumens)
* Wed Jan 09 2008 Chris Lumens - 11.4.0.18-1- Fix encrypted autopart traceback. (dlehman)- Allow for better recovery if the CD/DVD is bad. (clumens)- If downloading the updates image fails, prompt for a new location. (clumens)- X now relies on libpciaccess, so add it to our list. (clumens)- Erase temporary packages after installing them on all methods. (clumens)
* Mon Jan 07 2008 Chris Lumens - 11.4.0.17-1- Make text mode root password dialog default match GUI. (clumens)- Fix a segfault in making the URL dialog box. (clumens)
* Sun Jan 06 2008 Chris Lumens - 11.4.0.16-1- Fix checking the timestamps on split media installs. (clumens)- Fix reference to isodir to avoid a post-install traceback. (clumens)- Use a better test when populating the URL panel in loader. (clumens)- Don\'t use error messages from dosfslabel as the label (#427457). (clumens)- No longer require kudzu (#427680). (clumens)
* Thu Jan 03 2008 David Cantrell - 11.4.0.15-1- Require latest libdhcp (#378641) (dcantrell)
* Thu Jan 03 2008 David Cantrell - 11.4.0.14-1- Precreate /etc/modprobe.d in installroot (jkeating)- \'import sets\' in image.py (jkeating)- Fix traceback when displaying required media (clumens)
* Tue Jan 01 2008 Jeremy Katz - 11.4.0.13-1- Make it obvious which partitions are being formatted and encrypted (katzj)- Set initial sensitivity of encrypt button correctly (katzj)- Fix traceback on invalid passphrase (#426887) (katzj)- Use mkstemp() instead of tempnam() (katzj)- Don\'t resize filesystems which are being formatted (#426466) (katzj)- Add cracklib-dicts (#426444) (katzj)- Fix build (notting)