Changelog for python3-firewall-0.3.14.2-4.fc23.noarch.rpm :

* Wed Jul 22 2015 Adam Williamson - 0.3.14.2-4- bump versions on old config package obsoletes (f21 is on 0.3.14 now)
* Mon Jul 13 2015 Thomas Woerner - 0.3.14.2-3- Require python3-gobject-base for fedora >= 23 and rhel >= 8 (RHBZ#1242076)- Fix rhel defines: No python3 for rhel-7
* Thu Jun 18 2015 Thomas Woerner - 0.3.14.2-2- Fixed \'pid_file\' referenced before assignment (RHBZ#1233232)
* Wed Jun 17 2015 Thomas Woerner - 0.3.14.2-1- reunification of the firewalld spec files for all Fedora releases- fix dependencies for -applet and -config: use_python3 is the proper switch not with_python3 (RHBZ#1232493)- firewalld.spec: - fixed requirements for -applet and -config- man pages: - adapted firewall-applet man page to new version- firewall-applet: - Only honour active connections for zone changes - Change QSettings path and file names- firewall-config: - Only honour active connections for zone changes in the “Change Zones of Connections” menu- Translations: - updated translations - marked translations for “Connections” for review
* Wed Jun 17 2015 Fedora Release Engineering - 0.3.14.1-3- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
* Tue Jun 16 2015 Stephen Gallagher 0.3.14.1-2- Fix issue with missing polkit policy when installing firewalld on Cloud Edition.
* Fri Jun 12 2015 Thomas Woerner - 0.3.14.1-1- firewall-applet - do not use isSystemTrayAvailable check to fix KDE5 startup - dropped gtk applet remain: org.fedoraproject.FirewallApplet.gschema.xml
* Fri Jun 12 2015 Thomas Woerner - 0.3.14-1- renamed python2-firewall to python-firewall- fixed requirements for GUI parts with Python3- dropped upstream merged python3 patch- firewalld: - print real zone names in error messages - iptables 1.4.21 does not accept limits of 1/day, minimum is 2/day now - rate limit fix for rich rules - fix readdition of removed permanent direct settings - adaption of the polkit domains to use PK_ACTION_DIRECT_INFO - fixed two minor Python3 issues in firewall.core.io.direct - fixed use of fallback configuration values - fixed use without firewalld.conf - firewalld main restructureization - IPv6_rpfilter now also available as a property on D-Bus in the config interface - fixed wait option use for ipXtables - added --concurrent support for ebtables - richLanguage: allow masquerading with destination - richLanguage: limit masquerading forward rule to new connections - ipXtables: No dns lookups in available_tables and _detect_wait_option - full ebtables support: start, stop, reload, panic mode, direct chains and rules - fix for reload with direct rules - fix or flaws found by landscape.io - pid file handling fixes in case of pid file removal - fix for client issue in case of a dbus NoReply error- configuration - new services: dropbox-lansync, ptp - new icmptypes: timestamp-request, timestamp-reply- man pages: - firewalld.zones(5): fixed typos - firewalld.conf(5): Fixed wrong reference to firewalld.lockdown-whitelist page- firewall-applet: - new version using Qt4 fixing several issues with the Gtk version- spec file: - enabled Python3 support: new backends python-firewall and python3-firewall - some cleanup- git: - migrated to github- translations: - migrated to zanata- build environment: - no need for autoconf-2.69, 2.68 is sufficient
* Thu May 07 2015 Stephen Gallagher 0.3.13-7- Use VARIANT_ID instead of VARIANT for making decisions
* Thu Apr 16 2015 Stephen Gallagher 0.3.13-6- Switch to using $VARIANT directly from /etc/os-release
* Fri Mar 13 2015 Stephen Gallagher 0.3.13-5- Fix bugs with posttrans- Remove nonexistent fedora-cloud.conf symlink
* Fri Mar 13 2015 Stephen Gallagher 0.3.13-4- Remove per-edition config files- Decide on default configuration based on /etc/os-release
* Mon Feb 23 2015 Jiri Popelka - 0.3.13-3- use python3 bindings on fedora >=23
* Wed Jan 28 2015 Thomas Woerner - 0.3.13-2- enable python2 and python3 bindings for fedora >= 20 and rhel >= 7- use python3 bindings on fedora >= 22 and rhel >= 8 for firewalld, firewall-config and firewall-applet
* Thu Dec 04 2014 Jiri Popelka - 0.3.13-1- firewalld: - ipXtables: use -w or -w2 if supported (RHBZ#1161745, RHBZ#1151067) - DROP INVALID packets (RHBZ#1169837) - don\'t use ipv6header for protocol matching. (RHBZ#1065565) - removeAllPassthroughs(): remove passthroughs in reverse order (RHBZ#1167100) - fix config.service.removeDestination() (RHBZ#1164584)- firewall-config: - portProtoDialog: other protocol excludes port number/range - better fix for updating zoneStore also in update_active_zones() - fix typo in menu- configuration: - new services: tinc, vdsm, mosh, iscsi-target, rsyncd - ship and install XML Schema files. (#8)- man pages: - firewalld.dbus, firewalld.direct, firewalld, firewall-cmd- spec file: - filesystem subpackage - make dirs&files in /usr/lib/ world-readable (RHBZ#915988)
* Tue Oct 14 2014 Jiri Popelka - 0.3.12-1- firewalld: - new runtimeToPermanent and tracked passsthrough support - make permanent D-Bus interfaces more fine grained like the runtime versions (RHBZ#1127706) - richLanguage: allow using destination with forward-port - Rich_Rule.check(): action can\'t be used with icmp-block/forward-port/masquerade - fixed Python specific D-Bus exception (RHBZ#1132441)- firewall-cmd: - new --runtime-to-permanent to create permanent from runtime configuration - use new D-Bus methods for permanent changes - show target REJECT instead of %REJECT% (RHBZ#1058794) - --direct: make fail messages consistent (RHBZ#1141835)- firewall-config: - richRuleDialog - OK button tooltip indicates problem - use new D-Bus methods for permanent changes - show target REJECT instead of %REJECT% (RHBZ#1058794) - update \"Change Zones of Connections\" menu on default zone change (RHBZ#11120212) - fixed rename of zones, services and icmptypes to not create new entry (RBHZ#1131064)- configuration: - new service for Squid HTTP proxy server - new service for Kerberos admin server - new services for syslog and syslog-tls - new services for SNMP and SNMP traps - add Keywords to .desktop to improve software searchability- docs: - updated translations - firewalld.richlanguage: improvements suggested by Rufe Glick - firewalld.dbus: various improvements - firewalld.zone: better description of Limit tag - mention new homepage everywhere
* Wed Aug 27 2014 Jiri Popelka - 0.3.11-3- Quiet systemctl if cups-browsed.service is not installed
* Mon Aug 25 2014 Jiri Popelka - 0.3.11-2- add few Requires to spec (RHBZ#1133167)
* Wed Aug 20 2014 Jiri Popelka - 0.3.11-1- firewalld: - improve error messages - check built-in chains in direct chain handling functions (RHBZ#1120619) - dbus_to_python() check whether input is of expected type (RHBZ#1122018) - handle negative timeout values (RHBZ#1124476) - warn when Command/Uid/Use/Context already in lockdown whitelist (RHBZ#1126405) - make --lockdown-{on,off} work again (RHBZ#1111573)- firewall-cmd: - --timeout now accepts time units (RHBZ#994044)- firewall-config: - show active (not default) zones in bold (RHBZ#993655)- configuration: - remove ipp-client service from all zones (RHBZ#1105639). - fallbacks for missing values in firewalld.conf - create missing dirs under /etc if needed - add -Es to python command in lockdown-whitelist.xml (RHBZ#1099065)- docs: - \'direct\' methods concern only chains/rules added via \'direct\' (RHBZ#1120619) - --remove-[interface/source] don\'t need a zone to be specified (RHBZ#1125851) - various fixes in firewalld.zone(5), firewalld.dbus(5), firewalld.direct(5)- others: - rpm macros for easier packaging of e.g. services
* Tue Jul 22 2014 Thomas Woerner - 0.3.10-5- Fixed wrong default zone names for server and workstation (RHBZ#1120296)
* Tue Jul 08 2014 Thomas Woerner - 0.3.10-4- renamed fedora specific zones to FedoraServer and FedoraWorkstation for zone name limitations (length and allowed chars)
* Mon Jul 07 2014 Thomas Woerner - 0.3.10-3- New support for Fedora per-product configuration settings for Fedora.next https://fedoraproject.org/wiki/Per-Product_Configuration_Packaging_Draft- Added Fedora server zone (RHBZ#1110711)- Added Fedora workstation zone(RHBZ#1113775)
* Sat Jun 07 2014 Fedora Release Engineering - 0.3.10-2- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
* Wed May 28 2014 Jiri Popelka - 0.3.10-1- new services: freeipa-
*, puppermaster, amanda-k5, synergy, xmpp-
*, tor, privoxy, sane- do not use at_console in D-Bus policies (RHBZ#1094745)- apply all rich rules for non-default targets- AppData file (RHBZ#1094754)- separate Polkit actions for desktop & server (RHBZ#1091068)- sanitize missing ip6t_rpfilter (RHBZ#1074427)- firewall/core/io/
*: few improvements (RHBZ#1065738)- no load failed error for absent direct.xml file- new DBUS_INTERFACE.getZoneSettings to get all run-time zone settings- fixed creation and deletion of zones, services and icmptypes over D-Bus signals- FirewallClientZoneSettings: Set proper default target- if Python2 then encode strings from sax parser (RHBZ#1059104, RHBZ#1058853)- firewall-cmd: - don\'t colour output of query commands (RHBZ#1097841) - use \"default\" instead of {chain}_{zone} (RHBZ#1075675) - New --get-target and --set-target - Create and remove permanent zones, services and icmptypes- firewall-config: - Adding services and icmptypes resulted in duplicates in UI - Use left button menu of -applet in Option menu- firewall-offline-cmd: same functionality as \'firewall-cmd --permanent\'- firewall-applet: ZoneConnectionEditor was missing the Default Zone entry- bash-completion: getting zones/services/icmps is different with/without --permanent- firewalld.zone(5): removed superfluous slash (RHBZ#1091575)- updated translations
* Wed Feb 05 2014 Jiri Popelka - 0.3.9.3-1- Fixed persistent port forwarding (RHBZ#1056154)- Stop default zone rules being applied to all zones (RHBZ#1057875)- Enforce trust, block and drop zones in the filter table only (RHBZ#1055190)- Allow RAs prior to applying IPv6_rpfilter (RHBZ#1058505)- Fix writing of rule.audit in zone_writer()
* Fri Jan 17 2014 Jiri Popelka - 0.3.9.2-1- fix regression introduced in 0.3.9 (RHBZ#1053932)
* Thu Jan 16 2014 Jiri Popelka - 0.3.9.1-1- fix regressions introduced in 0.3.9 (RHBZ#1054068, RHBZ#1054120)
* Mon Jan 13 2014 Jiri Popelka - 0.3.9-1- translation updates- New IPv6_rpfilter setting to enable source address validation (RHBZ#847707)- Do not mix original and customized zones in case of target changes, apply only used zones- firewall-cmd: fix --
*_lockdown_whitelist_uid to work with uid 0- Don\'t show main window maximized. (RHBZ#1046811)- Use rmmod instead of \'modprobe -r\' (RHBZ#1031102)- Deprecate \'enabled\' attribute of \'masquerade\' element- firewall-config: new zone was added twice to the list- firewalld.dbus(5)- Enable python shebang fix again- firewall/client: handle_exceptions: Use loop in decorator- firewall-offline-cmd: Do not mask firewalld service with disabled option- firewall-config: richRuleDialogActionRejectType Entry -> ComboBox- Rich_Rule: fix parsing of reject element (RHBZ#1027373)- Show combined zones in permanent configuration (RHBZ#1002016)- firewall-cmd(1): document exit code 2 and colored output (RHBZ#1028507)- firewall-config: fix RHBZ#1028853
* Tue Nov 05 2013 Jiri Popelka - 0.3.8-1- fix memory leaks- New option --debug-gc- Python3 compatibility- Better non-ascii support- several firewall-config & firewall-applet fixes- New --remove-rules commands for firewall-cmd and removeRules methods for D-Bus- Fixed FirewallDirect.get_rules to return proper list- Fixed LastUpdatedOrderedDict.keys()- Enable rich rule usage in trusted zone (RHBZ#994144)- New error codes: INVALID_CONTEXT, INVALID_COMMAND, INVALID_USER and INVALID_UID
* Thu Oct 17 2013 Jiri Popelka - 0.3.7-1- Don\'t fail on missing ip[6]tables/ebtables table. (RHBZ#967376)- bash-completion: --permanent --direct options- firewall/core/fw.py: fix checking for iptables & ip6tables (RHBZ#1017087)- firewall-cmd: use client\'s exception_handler instead of catching exceptions ourselves- FirewallClientZoneSettings: fix {add|remove|query}RichRule()- Extend amanda-client service with 10080/tcp (RHBZ#1016867)- Simplify Rich_Rule()_lexer() by using functions.splitArgs()- Fix encoding problems in exception handling (RHBZ#1015941)
* Fri Oct 04 2013 Jiri Popelka - 0.3.6.2-1- firewall-offline-cmd: --forward-port \'toaddr\' is optional (RHBZ#1014958)- firewall-cmd: fix variable name (RHBZ#1015011)
* Thu Oct 03 2013 Jiri Popelka - 0.3.6.1-1- remove superfluous po files from archive
* Wed Oct 02 2013 Jiri Popelka - 0.3.6-1- firewalld.richlanguage.xml: correct log levels (RHBZ#993740)- firewall-config: Make sure that all zone settings are updated properly on firewalld restart- Rich_Limit: Allow long representation for duration (RHBZ#994103- firewall-config: Show \"Changes applied.\" after changes (RHBZ#993643)- Use own connection dialog to change zones for NM connections- Rename service cluster-suite to high-availability (RHBZ#885257)- Permanent direct support for firewall-config and firewall-cmd- Try to avoid file descriptor leaking (RHBZ#951900)- New functions to split and join args properly (honoring quotes)- firewall-cmd(1): 2 simple examples- Better IPv6 NAT checking.- Ship firewalld.direct(5).
* Mon Sep 30 2013 Jiri Popelka - 0.3.5-1- Only use one PK action for configuration (RHBZ#994729)- firewall-cmd: indicate non-zero exit code with red color- rich-rule: enable to have log without prefix & log_level & limit- log-level warn/err -> warning/error (RHBZ#1009436)- Use policy DROP while reloading, do not reset policy in restart twice- Add _direct chains to all table and chain combinations- documentation improvements- New firewalld.direct(5) man page docbook source- tests/firewall-cmd_test.sh: make rich language tests work- Rich_Rule._import_from_string(): improve error messages (RHBZ#994150)- direct.passthrough wasn\'t always matching out_signature (RHBZ#967800)- firewall-config: twist ICMP Type IP address family logic.- firewall-config: port-forwarding/masquerading dialog (RHBZ#993658)- firewall-offline-cmd: New --remove-service= option (BZ#969106)- firewall-config: Options->Lockdown was not changing permanent.- firewall-config: edit line on doubleclick (RHBZ#993572)- firewall-config: System Default Zone -> Default Zone (RHBZ#993811)- New direct D-Bus interface, persistent direct rule handling, enabled passthough- src/firewall-cmd: Fixed help output to use more visual parameters- src/firewall-cmd: New usage output, no redirection to man page anymore- src/firewall/core/rich.py: Fixed forwad port destinations- src/firewall-offline-cmd: Early enable/disable handling now with mask/unmask- doc/xml/firewalld.zone.xml: Added more information about masquerade use- Prefix to log message is optional (RHBZ#998079)- firewall-cmd: fix --permanent --change-interface (RHBZ#997974)- Sort zones/interfaces/service/icmptypes on output.- wbem-https service (RHBZ#996668)- applet&config: add support for KDE NetworkManager connection editor- firewall/core/fw_config.py: New method update_lockdown_whitelist- Added missing file watcher for lockdown whitelist in config D-Bus interface- firewall/core/watcher: New add_watch_file for lockdown-whitelist and direct- Make use of IPv6 NAT conditional, based on kernel number (RHBZ#967376)
* Tue Jul 30 2013 Thomas Woerner 0.3.4-1- several rich rule check enhancements and fixes- firewall-cmd: direct options - check ipv4|ipv6|eb (RHBZ#970505)- firewall-cmd(1): improve description of direct options (RHBZ#970509)- several firewall-applet enhancements and fixes- New README- several doc and man page fixes- Service definitions for PCP daemons (RHBZ#972262)- bash-completion: add lockdown and rich language options- firewall-cmd: add --permanent --list-all[-zones]- firewall-cmd: new -q/--quiet option- firewall-cmd: warn when default zone not active (RHBZ#971843)- firewall-cmd: check priority in --add-rule (RHBZ#914955)- add dhcpv6 (for server) service (RHBZ#917866)- firewall-cmd: add --permanent --get-zone-of-interface/source --change-interface/source- firewall-cmd: print result (yes/no) of all --query-
* commands- move permanent-getZoneOf{Interface|Source} from firewall-cmd to server- Check Interfaces/sources when updating permanent zone settings.- FirewallDConfig: getZoneOfInterface/Source can actually return more zones- Fixed toaddr check in forward port to only allow single address, no range- firewall-cmd: various output improvements- fw_zone: use check_single_address from firewall.functions- getZoneOfInterface/Source does not need to throw exception- firewall.functions: Use socket.inet_pton in checkIP, fixed checkIP
*nMask- firewall.core.io.service: Properly check port/proto and destination address- Install applet desktop file into /etc/xdg/autostart- Fixed option problem with rich rule destinations (RHBZ#979804)- Better exception creation in dbus_handle_exceptions() decorator (RHBZ#979790)- Updated firewall-offline-cmd- Use priority in add, remove, query and list of direct rules (RHBZ#979509)- New documentation (man pages are created from docbook sources)- firewall/core/io/direct.py: use prirority for rule methods, new get_all_ methods- direct: pass priority also to client.py and firewall-cmd- applet: New blink and blink-count settings- firewall.functions: New function ppid_of_pid- applet: Check for gnome3 and fix it, use new settings, new size-changed cb- firewall-offline-cmd: Fix use of systemctl in chroot- firewall-config: use string.ascii_letters instead of string.letters- dbus_to_python(): handle non-ascii chars in dbus.String.- Modernize old syntax constructions.- dict.keys() in Python 3 returns a \"view\" instead of list- Use gettext.install() to install _() in builtins namespace.- Allow non-ascii chars in \'short\' and \'description\'- README: More information for \"Working With The Source Repository\"- Build environment fixes- firewalld.spec: Added missing checks for rhel > 6 for pygobject3-base- firewall-applet: New setting show-inactive- Don\'t stop on reload when lockdown already enabled (RHBZ#987403)- firewall-cmd: --lockdown-on/off did not touch firewalld.conf- FirewallApplet.gschema.xml: Dropped unused sender-info setting- doc/firewall-applet.xml: Added information about gsettings- several debug and log message fixes- Add chain for sources so they can be checked before interfaces (RHBZ#903222)- Add dhcp and proxy-dhcp services (RHBZ#986947)- io/Zone(): don\'t error on deprecated family attr of source elem- Limit length of zone file name (to 12 chars) due to Netfilter internals.- It was not possible to overload a zone with defined source(s).- DEFAULT_ZONE_TARGET: {chain}_ZONE_{zone} -> {chain}_{zone}- New runtime getSettings for services and icmptypes, fixed policies callbacks- functions: New functions checkUser, checkUid and checkCommand- src/firewall/client: Fixed lockdown-whitelist-updated signal handling- firewall-cmd(1): move firewalld.richlanguage(5) reference in --
*-rich-rule- Rich rule service: Only add modules for accept action- firewall/core/rich: Several fixes and enhanced checks- Fixed reload of direct rules- firewall/client: New functions to set and get the exception handler- firewall-config: New and enhanced UI to handle lockdown and rich rules- zone\'s immutable attribute is redundant- Do not allow to set settings in config for immutable zones.- Ignore deprecated \'immutable\' attribute in zone files.- Eviscerate \'immutable\' completely.- FirewallDirect.query_rule(): fix it- permanent direct: activate firewall.core.io.direct:Direct reader- core/io/
*: simplify getting of character data- FirewallDirect.set_config(): allow reloading
* Thu Jun 20 2013 Jiri Popelka - Remove migrating to a systemd unit file from a SysV initscript- Remove pointless \"ExclusiveOS\" tag
* Fri Jun 07 2013 Thomas Woerner 0.3.3-2- Fixed rich rule check for use in D-Bus
* Thu Jun 06 2013 Thomas Woerner 0.3.3-1- new service files- relicensed logger.py under GPLv2+- firewall-config: sometimes we don\'t want to use client\'s exception handler- When removing Service/IcmpType remove it from zones too (RHBZ#958401)- firewall-config: work-around masquerade_check_cb() being called more times- Zone(IO): add interfaces/sources to D-Bus signature- Added missing UNKNOWN_SOURCE error code- fw_zone.check_source: Raise INVALID_FAMILY if family is invalid- New changeZoneOfInterface method, marked changeZone as deprecated- Fixed firewall-cmd man page entry for --panic-on- firewall-applet: Fixed possible problems of unescaped strings used for markup- New support to bind zones to source addresses and ranges (D-BUS, cmd, applet- Cleanup of unused variables in FirewallD.start- New firewall/fw_types.py with LastUpdatedOrderedDict- direct.chains, direct.rules: Using LastUpdatedOrderedDict- Support splitted zone files- New reader and writer for stored direct chains and rules- LockdownWhitelist: fix write(), add get_commands/uids/users/contexts()- fix service_writer() and icmptype_writer() to put newline at end of file- firewall-cmd: fix --list-sources- No need to specify whether source address family is IPv4 or IPv6- add getZoneOfSource() to D-Bus interface- Add tests and bash-completion for the new \"source\" operations- Convert all input args in D-Bus methods- setDefaultZone() was calling accessCheck()
*after
* the action- New uniqify() function to remove duplicates from list whilst preserving order- Zone.combine() merge also services and ports- config/applet: silence DBusException during start when FirewallD is not running (RHBZ#966518)- firewall-applet: more fixes to make the address sources family agnostic- Better defaults for lockdown white list- Use auth_admin_keep for allow_any and allow_inactive also- New D-Bus API for lockdown policies- Use IPv4, IPv6 and BRIDGE for FirewallD properties- Use rich rule action as audit type- Prototype of string-only D-Bus interface for rich language- Fixed wrongly merged source family check in firewall/core/io/zone.py- handle_cmr: report errors, cleanup modules in error case only, mark handling- Use audit type from rule action, fixed rule output- Fixed lockdown whitelist D-Bus handling method names- New rich rule handling in runtime D-Bus interface- Added interface, source and rich rule handling (runtime and permanent)- Fixed dbus_obj in FirewallClientConfigPolicies, added queryLockdown- Write changes in setLockdownWhitelist- Fixed typo in policies log message in method calls- firewall-cmd: Added rich rule, lockdown and lockdown whitelist handling- Don\'t check access in query/getLockdownWhitelist
*()- firewall-cmd: Also output masquerade flag in --list-all- firewall-cmd: argparse is able to convert argument to desired type itself- firewall-cmd_test.sh: tests for permanent interfaces/sources and lockdown whitelist- Makefile.am: add missing files- firewall-cmd_test.sh: tests for rich rules- Added lockdown, source, interface and rich rule docs to firewall-cmd- Do not masquerade lo if masquerade is enabled in the default zone (RHBZ#904098)- Use in metavar for firewall-cmd parser
* Fri May 10 2013 Jiri Popelka - 0.3.2-2- removed unintentional en_US.po from tarball
* Tue Apr 30 2013 Jiri Popelka - 0.3.2-1- Fix signal handling for SIGTERM- Additional service files (RHBZ#914859)- Updated po files- s/persistent/permanent/ (Trac Ticket #7)- Better behaviour when running without valid DISPLAY (RHBZ#955414)- client.handle_exceptions(): do not loop forever- Set Zone.defaults in zone_reader (RHBZ#951747)- client: do not pass the dbus exception name to handler- IO_Object_XMLGenerator: make it work with Python 2.7.4 (RHBZ#951741)- firewall-cmd: do not use deprecated BaseException.message- client.py: fix handle_exceptions() (RHBZ#951314)- firewall-config: check zone/service/icmptype name (RHBZ#947820)- Allow 3121/tcp (pacemaker_remote) in cluster-suite service. (RHBZ#885257)- firewall-applet: fix default zone hangling in \'shields-up\' (RHBZ#947230)- FirewallError.get_code(): check for unknown error
* Wed Apr 17 2013 Jiri Popelka - 0.3.1-2- Make permanenent changes work with Python 2.7.4 (RHBZ#951741)
* Thu Mar 28 2013 Thomas Woerner 0.3.1-1- Use explicit file lists for make dist- New rich rule validation check code- New global check_port and check_address functions- Allow source white and black listing with the rich rule- Fix error handling in case of unsupported family in rich rule- Enable ip_forwarding in masquerade and forward-port- New functions to read and write simple files using filename and content- Add --enable-sysconfig to install Fedora-specific sysconfig config file.- Add chains for security table (RHBZ#927015)- firewalld.spec: no need to specify --with-systemd-unitdir- firewalld.service: remove syslog.target and dbus.target- firewalld.service: replace hard-coded paths- Move bash-completion to new location.- Revert \"Added configure for new build env\"- Revert \"Added Makefile.in files\"- Revert \"Added po/Makefile.in.in\"- Revert \"Added po/LINGUAS\"- Revert \"Added aclocal.m4\"- Amend zone XML Schema
* Wed Mar 20 2013 Thomas Woerner 0.3.0-1- Added rich language support- Added lockdown feature- Allow to bind interfaces and sources to zones permanently- Enabled IPv6 NAT support masquerading and port/packet forwarding for IPv6 only with rich language- Handle polkit errors in client class and firewall-config- Added priority description for --direct --add-rule in firewall-cmd man page- Add XML Schemas for zones/services/icmptypes XMLs- Don\'t keep file descriptors open when forking- Introduce --nopid option for firewalld- New FORWARD_IN_ZONES and FORWARD_OUT_ZONES chains (RHBZ#912782)- Update cluster-suite service (RHBZ#885257)- firewall-cmd: rename --enable/disable-panic to --panic-on/off (RHBZ#874912)- Fix interaction problem of changed event of gtk combobox with polkit-kde by processing all remaining events (RHBZ#915892)- Stop default zone rules being applied to all zones (RHBZ#912782)- Firewall.start(): don\'t call set_default_zone()- Add wiki\'s URL to firewalld(1) and firewall-cmd(1) man pages- firewalld-cmd: make --state verbose (RHBZ#886484)- improve firewalld --help (RHBZ#910492)- firewall-cmd: --add/remove-
* can be used multiple times (RHBZ#879834)- Continue loading zone in case of wrong service/port etc. (RHBZ#909466)- Check also services and icmptypes in Zone() (RHBZ#909466)- Increase the maximum length of the port forwarding fields from 5 to 11 in firewall-config- firewall-cmd: add usage to fail message- firewall-cmd: redefine usage to point to man page- firewall-cmd: fix visible problems with arg. parsing- Use argparse module for parsing command line options and arguments- firewall-cmd.1: better clarify where to find ACTIONs- firewall-cmd Bash completion- firewall-cmd.1: comment --zone= usage and move some options- Use zone\'s target only in %s_ZONES chains- default zone in firewalld.conf was set to public with every restart (#902845)- man page cleanup- code cleanup
* Thu Mar 07 2013 Jiri Popelka - 0.2.12-5- Another fix for RHBZ#912782
* Wed Feb 20 2013 Jiri Popelka - 0.2.12-4- Stop default zone rules being applied to all zones (RHBZ#912782)
* Wed Feb 13 2013 Fedora Release Engineering - 0.2.12-3- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
* Tue Jan 22 2013 Jiri Popelka - 0.2.12-2- Default zone in firewalld.conf was reseted with every restart (RHBZ#902845)- Add icon cache related scriptlets for firewall-config (RHBZ#902680)- Fix typo in firewall-config (RHBZ#895812)- Fix few mistakes in firewall-cmd(1) man page
* Mon Jan 14 2013 Thomas Woerner 0.2.12-1- firewall-cmd: use -V instead of -v for version info (RHBZ#886477)- firewall-cmd: don\'t check reload()\'s return value (RHBZ#886461)- actually install firewalld.zones.5- firewall-config: treat exceptions when adding new zone/service/icmp (RHBZ#886602)- firewalld.spec: Fixed requirements of firewall-config to use gtk2 and pygobject3- Fail gracefully when running in non X environment.(RHBZ#886551)- offline-cmd: fail gracefully when no s-c-f config- fix duplicated iptables rules (RHBZ#886515)- detect errors and duplicates in config file (RHBZ#886581)- firewall-config: don\'t make \'Edit Service\' and \'Edit ICMP Type\' insensitive- firewalld.spec: fixed requirements, require pygobject3-base- frewall-applet: Unused code cleanup- firewall-applet: several usability fixes and enhancements (RHBZ#886531) (RHBZ#886534)- firewall/server/server.py: fixed KeyboardInterrupt message (RHBZ#886558)- Moved fallback zone and minimal_mark to firewall.config.__init__- Do not raise ZONE_ALREADY_SET in change_zone if old zone is set again (RHBZ#886432)- Make default zone default for all unset connections/interfaces (RHBZ#888288) (RHBZ#882736)- firewall-config: Use Gtk.MessageType.WARNING for warning dialog- firewall-config: Handle unknown services and icmptypes in persistent mode- firewall-config: Do not load settings more than once- firewall-config: UI cleanup and fixes (RHBZ#888242)- firewall-cmd: created alias --change-zone for --change-interface- firewall-cmd man page updates (RHBZ#806511)- Merged branch \'build-cleanups\'- dropped call to autogen.sh in build stage, not needed anymore due to \'build-cleanups\' merge
* Thu Dec 13 2012 Thomas Woerner 0.2.11-2- require pygobject3-base instead of pygobject3 (no cairo needed) (RHBZ#874378)- fixed dependencies of firewall-config to use gtk3 with pygobject3-base and not pygtk2
* Tue Dec 11 2012 Thomas Woerner 0.2.11-1- Fixed more _xmlplus (PyXML) incompatibilities to python xml- Several man page updates- Fixed error in addForwardPort, removeForwardPort and queryForwardPort- firewall-cmd: use already existing queryForwardPort()- Update firewall.cmd man page, use man page as firewall-cmd usage (rhbz#876394)- firewall-config: Do not force to show labels in the main toolbar- firewall-config: Dropped \"Change default zone\" from toolbar- firewall-config: Added menu entry to change zones of connections- firewall-applet: Zones can be changed now using nm-connection-editor (rhbz#876661)- translation updates: cs, hu, ja
* Tue Nov 20 2012 Thomas Woerner 0.2.10-1- tests/firewalld_config.py: tests for config.service and config.icmptype- FirewallClientConfigServiceSettings(): destinations are dict not list- service/zone/icmptype: do not write deprecated name attribute- New service ntp- firewall-config: Fixed name of about dialog- configure.in: Fixed getting of error codes- Added coding to all pyhton files- Fixed copyright years- Beautified file headers- Force use of pygobject3 in python-slip (RHBZ#874378)- Log: firewall.server.config_icmptype, firewall.server.config_service and firewall.server.config_zone: Prepend full path- Allow \":\" in interface names for interface aliases- Add name argument to Updated and Renamed signal- Disable IPv4, IPv6 and EB tables if missing - for IPv4/IPv6 only environments- firewall-config.glade file cleanup- firewall-config: loadDefaults() can throw exception- Use toolbars for Add/Edit/Remove/LoadDefaults buttons for zones, services and icmp types- New vnc-server service, opens ports for displays :0 to :3 (RHBZ#877035)- firewall-cmd: Fix typo in help output, allow default zone usage for permanenent options- Translation updates: cs, fr, ja, pt_BR and zh_CN
* Wed Oct 17 2012 Thomas Woerner 0.2.9-1- firewall-config: some UI usability changes- firewall-cmd: New option --list-all-zones, output of --list-all changed, more option combination checks- firewall-applet: Replaced NMClient by direct DBUS calls to fix python core dumps in case of connection activates/deactivates- Use fallback \'C\' locale if current locale isn\'t supported (RHBZ#860278)- Add interfaces to zones again after reload- firewall-cmd: use FirewallClient().connected value- firewall-cmd: --remove-interface was not working due to a typo- Do not use restorecon for new and backup files- Fixed use of properties REJECT and DROP- firewalld_test.py: check interfaces after reload- Translation updates- Renamed firewall-convert-scfw-config to firewall-offline-cmd, used by anaconda for firewall configuration (e.g. kickstart)- Fix python shebang to use -Es at installation time for bin_SCRIPTS and sbin_SCRIPTS and at all times in gtk3_chooserbutton.py- tests/firewalld_config.py: update test_zones() test case- Config interface: improve renaming of zones/services/icmp_types- Move emiting of Added signals closer to source.- FirewallClient(): config:ServiceAdded signal was wrongly mapped- Add argument \'name\' to Removed signal- firewall-config: Add callbacks for config:[service|icmp]-[added|removed]- firewall-config: catch INVALID_X error when removing zone/service/icmp_type- firewall-config: remove unused code- Revert \"Neutralize _xmlplus instead of conforming it\"- firewall-applet: some UI usability changes- firewall-cmd: ALREADY_ENABLED, NOT_ENABLED, ZONE_ALREADY_SET are warnings
* Fri Sep 07 2012 Thomas Woerner 0.2.8-1- Do not apply old settings to zones after reload- FirewallClient: Added callback structure for firewalld signals- New firewall-config with full zone, service and icmptype support- Added Shields Up/Down configuration dialog to firewall-applet- Name attribute of main tag deprecated for zones, services and icmptypes, will be ignored if present- Fixed wrong references in firewalld man page- Unregister DBus interfaces after sending out the Removed signal- Use proper DBus signature in addIcmpType, addService and addZone- New builtin property for config interfaces- New test case for Config interface- spec: use new systemd-rpm macros (rhbz#850110)- More config file verifications- Lots of smaller fixes and enhancements
* Tue Aug 21 2012 Jiri Popelka 0.2.7-2- use new systemd-rpm macros (rhbz#850110)
* Mon Aug 13 2012 Thomas Woerner 0.2.7-1- Update of firewall-config- Some bug fixes
* Tue Aug 07 2012 Thomas Woerner 0.2.6-1- New D-BUS interface for persistent configuration- Aded support for persistent zone configuration in firewall-cmd- New Shields Up feature in firewall-applet- New requirements for python-decorator and pygobject3- New firewall-config sub-package- New firewall-convert-scfw-config config script
* Fri Apr 20 2012 Thomas Woerner 0.2.5-1- Fixed traceback in firewall-cmd for failed or canceled authorization, return proper error codes, new error codes NOT_RUNNING and NOT_AUTHORIZED- Enhanced firewalld service file (RHBZ#806868) and (RHBZ#811240)- Fixed duplicates in zone after reload, enabled timed settings after reload- Removed conntrack --ctstate INVALID check from default ruleset, because it results in ICMP problems (RHBZ#806017).- Update interfaces in default zone after reload (rhbz#804814)- New man pages for firewalld(1), firewalld.conf(5), firewalld.icmptype(5), firewalld.service(5) and firewalld.zone(5), updated firewall-cmd man page (RHBZ#811257)- Fixed firewall-cmd help output- Fixed missing icon for firewall-applet (RHBZ#808759)- Added root user check for firewalld (RHBZ#767654)- Fixed requirements of firewall-applet sub package (RHBZ#808746)- Update interfaces in default zone after changing of default zone (RHBZ#804814)- Start firewalld before NetworkManager (RHBZ#811240)- Add Type=dbus and BusName to service file (RHBZ#811240)
* Fri Mar 16 2012 Thomas Woerner 0.2.4-1- fixed firewalld.conf save exception if no temporary file can be written to /etc/firewalld/
* Thu Mar 15 2012 Thomas Woerner 0.2.3-1- firewall-cmd: several changes and fixes- code cleanup- fixed icmp protocol used for ipv6 (rhbz#801182)- added and fixed some comments- properly restore zone settings, timeout is always set, check for 0- some FirewallError exceptions were actually not raised- do not REJECT in each zone- removeInterface() don\'t require zone- new tests in firewall-test script- dbus_to_python() was ignoring certain values- added functions for the direct interface: chains, rules, passthrough- fixed inconsistent data after reload- some fixes for the direct interface: priority positions are bound to ipv, table and chain- added support for direct interface in firewall-cmd:- added isImmutable(zone) to zone D-Bus interface- renamed policy file- enhancements for error messages, enables output for direct.passthrough- added allow_any to firewald policies, using at leas auth_admin for policies- replaced ENABLE_FAILED, DISABLE_FAILED, ADD_FAILED and REMOVE_FAILED by COMMAND_FAILED, resorted error codes- new firewalld configuration setting CleanupOnExit- enabled polkit again, found a fix for property problem with slip.dbus.service- added dhcpv6-client to \'public\' (the default) and to \'internal\' zones.- fixed missing settings form zone config files in \"firewall-cmd --list=all --zone=\" call- added list functions for services and icmptypes, added --list=services and --list=icmptypes to firewall-cmd
* Tue Mar 06 2012 Thomas Woerner 0.2.2-1- enabled dhcpv6-client service for zones home and work- new dhcpv6-client service- firewall-cmd: query mode returns reversed values- new zone.changeZone(zone, interface)- moved zones, services and icmptypes to /usr/lib/firewalld, can be overloaded by files in /etc/firewalld (no overload of immutable zones block, drop, trusted)- reset MinimalMark in firewalld.cnf to default value- fixed service destination (addresses not used)- fix xmlplus to be compatible with the python xml sax parser and python 3 by adding __contains__ to xml.sax.xmlreader.AttributesImpl- use icon and glib related post, postun and posttrans scriptes for firewall- firewall-cmd: fix typo in state- firewall-cmd: fix usage()- firewall-cmd: fix interface action description in usage()- client.py: fix definition of queryInterface()- client.py: fix typo in getInterfaces()- firewalld.service: do not fork- firewall-cmd: fix bug in --list=port and --port action help message- firewall-cmd: fix bug in --list=service
* Mon Mar 05 2012 Thomas Woerner - moved zones, services and icmptypes to /usr/lib/firewalld, can be overloaded by files in /etc/firewalld (no overload of immutable zones block, drop, trusted)
* Tue Feb 21 2012 Thomas Woerner 0.2.1-1- added missing firewall.dbus_utils
* Tue Feb 07 2012 Thomas Woerner 0.2.0-2- added glib2-devel to build requires, needed for gsettings.m4- added --with-system-unitdir arg to fix installaiton of system file- added glib-compile-schemas calls for postun and posttrans- added EXTRA_DIST file lists
* Mon Feb 06 2012 Thomas Woerner 0.2.0-1- version 0.2.0 with new FirewallD1 D-BUS interface- supports zones with a default zone- new direct interface as a replacement of the partial virt interface with additional passthrough functionality- dropped custom rules, use direct interface instead- dropped trusted interface funcionality, use trusted zone instead- using zone, service and icmptype configuration files- not using any system-config-firewall parts anymore
* Mon Feb 14 2011 Thomas Woerner 0.1.3-1- new version 0.1.3- restore all firewall features for reload: panic and virt rules and chains- string fixes for firewall-cmd man page (by Jiri Popelka)- fixed firewall-cmd port list (by Jiri Popelka)- added firewall dbus client connect check to firewall-cmd (by Jiri Popelka)- translation updates: de, es, gu, it, ja, kn, ml, nl, or, pa, pl, ru, ta, uk, zh_CN
* Mon Jan 03 2011 Thomas Woerner 0.1.2-1- fixed package according to package review (rhbz#665395): - non executable scripts: dropped shebang - using newer GPL license file - made /etc/dbus-1/system.d/FirewallD.conf config(noreplace) - added requires(post) and (pre) for chkconfig
* Mon Jan 03 2011 Thomas Woerner 0.1.1-1- new version 0.1.1- fixed source path in POTFILES
*- added missing firewall_config.py.in- added misssing space for spec_ver line- using firewall_config.VARLOGFILE- added date to logging output- also log fatal and error logs to stderr and firewall_config.VARLOGFILE- make log message for active_firewalld fatal
* Mon Dec 20 2010 Thomas Woerner 0.1-1- initial package (proof of concept implementation)