Changelog for
lsyncd-debuginfo-2.3.1-lp160.1.2.x86_64.rpm :
* Mon Mar 11 2024 seife+obsAATTb1-systems.com- fix tarball to match the source URL
* Tue Mar 05 2024 seife+obsAATTb1-systems.com- update to version 2.3.1 (2022-11-17):
* multiple bugfixes, style fixes
* add nix flake support
* add support for tunnel commands
* add support for batchSizeLimit
* add -onepass option
* add crontab support
* support relative executable paths- remove obsoleted patches lsyncd-lua.patch, lsyncd-man.patch- add \"After=remote-fs.target\" to lsyncd.service to avoid syncing unmounted NFS shares
* Fri Mar 01 2024 pgajdosAATTsuse.com- Use %autosetup macro. Allows to eliminate the usage of deprecated %patchN
* Wed Oct 06 2021 Johannes Segitz
- Added hardening to systemd service(s) (bsc#1181400). Modified:
* lsyncd.service
* Sun Mar 07 2021 Carsten Ziepke - Use %%cmake macros
* Sun Mar 07 2021 Carsten Ziepke - Rebase lsyncd-lua.patch and add fix for implicit declaration of function lua_objlen - renamed to lua_rawlen in 5.2- Run spec-cleaner- Remove insserv configuration and lsyncd-init.d
* Sun Jul 29 2018 jengelhAATTinai.de- Replace %__-type macro indirections. Use %_smp_mflags for parallel build.
* Thu Apr 26 2018 ecsosAATTopensuse.org- update to 2.2.3 - enhaencement: supporting includes with new filter and filterFrom options - change: needing now at least Lua 5.2 (Lua 5.1 no longer supported, Lua5.3 supported) - change: if the target/targetdir ends with a \':\' do not append a trailing \'/\' to it, since that would change it from homedir to rootdir! - add: example for Amazon S3 Bucket (Daniel Miranda) - fix: setting stdout/stderr to linebuffer mode. - fix: Lua5.3 compatiblity, using load() instead of loadstring() - fix: cmake lua detection, will resort to \"lua\" and \"luac\" binaries only if more specific suffixes (e.g. luac5.3) are not available - fix: test suit, Lua5.3 compatibility (table.unpack)- changes from 2.2.2 - fix: checkgauge \'insist\' - fix: no partial path exlusion tests - fix: write pid of forked process in pidfile - fix: crash on not reachable target - workaround: changed back to filter style rsync calling until https://bugzilla.samba.org/show_bug.cgi?id=12569 is fixed and released.- changes from 2.2.1 - enhancement: now always using filter lists with rysnc instead of include/exclude lists taking advantage of the new - -delete-missing-args parameter to delete files on target. >>> Thus Lsyncd 2.2.1 needs rsync >= 3.1.0 - change: added \"tests\" make target to run all the tests. - fix: crash due to typo in changed ^path, ^pathdir, ^pathname- changes from 2.2.0 - enhancement: add rsync options: \"append\", \"append_verify\", \"backup\", \"backup_dir\", \"chmod\", \"chown\", \"copy_dirlinks\", \"existing\", \"groupmap\", \"omit_dir_times\", \"omit_link_times\", \"suffix,\" \"usermap\", - enhancement: settings{ } now checks for unknown entries and errors if so. - change: Level3 scripts ^path,^pathdir and ^pathname now don\'t start with a slash. - change: Lsyncd now writes a startup log message before daemonizing does in case logging fails, it is recognized before it cannot message anything about it, since it deamonized - change: compatible with Lua5.3 (along with 5.1 and 5.2) - change: _verbatim forced for \'exitcodes\' entry. - change: manpage is not rebuild by default. it is provided precompiled. - change: faulty/deprecated config files that use settings = { ... }, with equal sign are no longer worked around. - change: default.direct now calls copy with -p - fix: potential race conditions: default.rsyncssh will now channel deletes also through rsync and treats moves as blocking events. - fix: \']\' is not escaped for rsync rules, since rsync only applies doesn\'t applie pattern matching if no other pattern chars are found. - fix: Shell injection hole close for default.direct on mv commands. - fix: Crash of default-direct when source doesn\'t exit - fix: fixed faulty event replacement, a race condition noticed by extensive default.rsyncssh testing changed Delays were not reflected in Events- changes from 2.1.6 - enhancement: Lsyncd now locks its pidfile - enhancement: added ssh.identifyFile and ssh.options options - enhancement: added rsync inplace option - fix: ignore blank lines and rsync commenits in exclude files - fix: don\'t tread exclude lines with embedded \"+\" chars as inclusions - fix: crash when debugging inotify - fix: fixed Finished/Retrying error messages being swapped around - fix: properly encapsulate filenames on ssh mv commands to avoid shell command injections. - fix: postcmd example - change: closes also on INT signals - change: now removes its pidfile on INT and TERM signals - change: changed build system from autotools to cmake- change url and source to new location- remove lsyncd-lua-5_3.patch, because no more need- aad patch lsyncd-lua.patch to find libraries- add patch lsyncd-man.patch to put manpages to correct location- fix all rpmlint warnings- Replace %__-type macro indirections.- Use %_smp_mflags for parallel build.
* Tue Apr 17 2018 mikhail.kasimovAATTgmail.com- Updated path to lsyncd.conf for lsyncd.service and lsyncd.sysconfig (boo#975118)
* Thu Nov 23 2017 rbrownAATTsuse.com- Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)
* Wed Mar 15 2017 dimstarAATTopensuse.org- Explicitly package files installed by make install into _docdir: rpm 4.13 no longer implicitly packages those files.
* Thu Jul 30 2015 dimstarAATTopensuse.org- Add lsyncd-lua-5_3.patch: Fix build with LUA 5.3.
* Fri Jun 05 2015 p.drouandAATTgmail.com- Remove scriptlets pre/post on systems with sysvinit support.
* Sun Mar 01 2015 p.drouandAATTgmail.com- Update to version 2.1.5
* enhancement: Added rsync options: bwlimit, timeout
* fix: Specifying ssh port no longer overwrites the last rsync option
* fix: rsync option password_file is now accepted
* fix: onAttrib is accepted again
* fix: -log Exec now prints now fully all arguments
* fix: configure script lua detection now includes math lib to workaround wrongly created \"needs COMPAT_ALL\" messages.
* fix: repaired variable replacement for layer 3 scripts
* fix: config.delay is now checked to a number >= 0
* change: a2x is no longer checked by configure script. should not be needed when building from tarball- Use download Url as source- Add sysconfig config script support for init scripts- Fix sysvinit script to be able to use sysconfig options- Add systemd support for openSUSE > 13.2- Add required macros to support correctly sysvinit script- Remove redundant %clean section
* Wed Feb 06 2013 e.istominAATTedss.ee- update to 2.1.4- remove lua 5.2 patch (https://github.com/axkibe/lsyncd/pull/148)
* Tue Oct 09 2012 crrodriguezAATTopensuse.org- Build against LUA 5.2
* Sun Feb 26 2012 dmuellerAATTsuse.de- fix build in factory (build against lua 5.1)
* Mon Nov 28 2011 eugene.istominAATTedss.ee- update to 2.0.5
* fix: Lsyncd will now terminate if it inotify watching exceeds its preset limit.
* fix: rsync error exit code 12 now results in retries.
* fix: Lsyncd 2.0.5 should now compile better on a bit elder GNU/Linux versions.
* fix: examples are now installed in the configured document directory.
* fix: partial transfers during startup are considered ok. Lsyncd will rework the specified files anyway.
* change: Layer 1 interface init() now receives an \"Init\" event instead of an inlet.
* change: builtin Lua code is now loaded via a c-array.Now more portable and correct memory flags are set.
* change: Lsyncd will now bail on unknown error codes.
* enhancement: settings.maxProcesses can now be set as a global limit of childprocesses
* enhancement: Lsyncd will refuse to start when any startup rsync does not work cleanly and returns \"again\" unless settings.insist or - -insist is specified, then Lsyncd will keep retrying until it works.
* enhancement: option \"rsyncBinary\" determines which rsync Lsyncd calls. Default is \"/usr/bin/rsync\"
* enhancement: fsevents (\"inotify for OSX\") fixed for Snowleopard. and is available to configure by default.
* enhancement: settings.inotifyMode: the actualy Modification event Lsyncd reacts to can now be configured. Default is to react on file closing in write mode.
* enhancement: readdir(path) is available to userscripts, reads the contents of a directory.
* Mon Mar 28 2011 dmacvicarAATTsuse.de- update to 2.0.4
* enhancement: new setting options logident, logfacility
* fix: moving filenames with spaces through ssh
* fix: excludes containing chars % $ ( ) . [ ] + -
* fix: various typos
* change: api, settings.statusInterval instead of settings.statusIntervall
* Tue Mar 08 2011 dmacvicarAATTsuse.de- update to 2.0.3
* enhancement: new default target --direct using /bin/ binaries to keep to local dirs in sync (and by default not preserving ownership)
* example: added a new example how to remotely execute a command after each rsync operations
* fix: possible crash with long rsyncOps table exceeding lua stack.
* fix: excludes now properly match relative and absolute paths
* fix: call to nil function when manually adding blanket delays
* fix: on ReiserFS not delivering proper dir stats and when encountering a symlink, aquire the node stat for the symlink instead from the linked node.
* change: leave lua apichecking enabled by default.
* Fri Jan 21 2011 dmacvicarAATTsuse.de- update to 2.0.2
* fix: exclude rules not terminated with \'/\' now match a file or dir named exactly the same not starting with.
* fix: pass exclude rules to the startup sync
* fix: when matching exclusion to not add inotify use same partial path than on syncs
* fix: properly close pipes that needed more than one write.- 2.0.1 changes
* most important fix: The garbage collector in 2.0.0 was able to remove event lists just at the wrong moment so an \"agent unknown\" error was raised.
* fixed: The pid in the pidfile should be now the pid after the deamon fork() and not the pid initiators pid.
* improved: You can now specify multiple command-line options in rsyncOps by using a table. eg. rsyncOps = {\"--lts\", \"--safe-links\"}
* Thu Dec 02 2010 dmacvicarAATTsuse.de- update to 2.0.0 final
* Fri Nov 26 2010 dmacvicarAATTsuse.de- update to 2.0beta3
