Changelog for lzip-debuginfo-1.23-slfo.1.1.10.x86_64.rpm :

* Sun Feb 13 2022 jengelhAATTinai.de- Update to release 1.23
* Decompression time has been reduced by 5-12% depending on the file.
* In case of error in a numerical argument to a command line option, lzip now shows the name of the option and the range of valid values.
* Tue Jan 19 2021 dmuellerAATTsuse.com- update to 1.22:
* Lzip now reports an error if a file name is empty (lzip -t \"\").
* Option \'-o, --output\' now behaves like \'-c, --stdout\', but sending the output unconditionally to a file instead of to standard output.
* Lzip now does not even open the output file if the input file is a terminal.
* Lzip can now be built, tested, and installed on systems lacking a \'make\' program. (Feature suggested by Mohammad Akhlaghi).
* The words \'decompressed\' and \'compressed\' have been replaced with the shorter \'out\' and \'in\' in the verbose output when decompressing or testing.
* Option \'--list\' now reports corruption or truncation of the last header in a multimenber file specifically instead of showing the generic message \"Last member in input file is truncated or corrupt.\"
* The commands needed to extract files from a tar.lz archive have been documented in the manual, in the output of \'--help\', and in the man page.
* Plzip and tarlz are mentioned in the manual as alternatives for multiprocessors.
* Several fixes and improvements have been made to the manual.
* Sun Jan 13 2019 seanlewAATTopensuse.org- Update to new upstream release 1.21
* Errors are now also checked when closing the input file
* The descritions in the man pages are improved
* Config script now accepts appending CXXFLAGS options
* Fri Dec 14 2018 jengelhAATTinai.de- Update to new upstream release 1.21~rc1
* Detection of forbidden combinations of characters in trailing data has been improved.
* Mon Mar 05 2018 jengelhAATTinai.de- Update to new upstream release 1.20
* The option \"--loose-trailing\" has been added.
* The test used by clzip to discriminate trailing data from a corrupt header in multimember or concatenated files has been improved to a Hamming distance of 3.
* The \"-S\" option now keeps input files unchanged.
* Tue Jan 23 2018 avindraAATTopensuse.org- Update to version 1.19
* The option \'-l, --list\' has been ported from lziprecover.
* Don\'t allow mixing different operations (-d, -l or -t).
* Compression time of option \'-0\' has been slightly reduced.
* Decompression time has been reduced by 2%.
* main.cc: Continue testing if any input file is a terminal.
* main.cc: Show trailing data in both hexadecimal and ASCII.
* encoder.cc (Matchfinder_base): Verify size passed to new.
* file_index.cc: Improve detection of bad dict and trailing data.
* lzip.h: Unified messages for bad magic, trailing data, etc.- switch to https in source urls
* Sun Jun 05 2016 mpluskalAATTsuse.com- Update to version 1.18:
* main.cc: Added new option \'-a, --trailing-error\'.
* Decompression time has been reduced by 2%.
* decoder.cc (verify_trailer): Removed test of final code.
* main.cc (main): Delete \'--output\' file if infd is a terminal.
* main.cc (main): Don\'t use stdin more than once.
* Removed decompression support for version 0 files.
* lzip.texi: Added chapter \'Trailing data\'.
* configure: Avoid warning on some shells when testing for g++.
* Makefile.in: Detect the existence of install-info.
* testsuite/check.sh: A POSIX shell is required to run the tests.
* testsuite/check.sh: Don\'t check error messages.
* Thu Aug 06 2015 jengelhAATTinai.de- Update to new upstream release 1.17
* The compression code has been reorganized to ease the porting of the fast encoder to clzip and lzlib.
* The new chapter \"Quality assurance\" has been added to the manual.
* Wed Oct 01 2014 jengelhAATTinai.de- Update to new upstream release 1.16
* Compression ratio of option -9 has been slightly increased.
* Compression time has been reduced by 4%.
* `lzip -0` is now comparable in compression speed and ratio to `gzip -6` (gzip\'s default compression level).
* Copying of file dates, permissions, and ownership now behaves like `cp -p`. (If the user ID or the group ID cannot be duplicated, the file permission bits S_ISUID and S_ISGID are cleared).
* The license has been changed to GPL version 2 or later.
* Fri Oct 04 2013 jengelhAATTinai.de- Update to new upstream release 1.15
* This release shows the progress of compression at verbosity level 2 (-vv).
* The chapter \"Stream format\" and the appendix \"Reference source code\" have been added to the manual.
* Mon Apr 01 2013 pascal.bleserAATTopensuse.org- update to 1.14:
* Multi-step trials have been implemented
* Compression ratio has been slightly increased
* Compression time has been reduced by 5%
* Decompression time has been reduced by 12%
* Tue Sep 04 2012 cfarrellAATTsuse.com- license update: GPL-3.0+ Use SPDX format (http://www.spdx.org/licenses)
* Sun Mar 18 2012 pascal.bleserAATTopensuse.org- update to 1.13:
* lziprecover has been moved to its own package
* inability to change output file attributes has been downgraded from error to warning
* compression time of option \"-0\" has been reduced by 2%
* a reorganization of the compression code has been made
* a small change has been made in the \"--help\" output and man page
* quote characters in messages have been changed as advised by GNU Coding Standards
* Fri May 13 2011 pascal.bleserAATTopensuse.org- update to 1.12:
* the option \"-F, --recompress\", which forces recompression of files whose name already has the \".lz\" or \".tlz\" suffix, has been added
* for large values of \"--match-length\", the compression ratio has been slightly increased, and compression time has been reduced by up to 6%
* the compression time of the option \"-0\" has been reduced by 2%
* this release will print only one status line for each multi-member file when only one \"-v\" is specified
* it will print up to 6 bytes of trailing garbage when \"-vvvv\" is specified
* it does not show the message \"and `--stdout\' was not specified\" for file types that can\'t be read (directories, etc)
* Mon Sep 27 2010 pascal.bleserAATTopensuse.org- update to 1.11:
* match length limit set by options -1 to -8 has been reduced to extend the range of use towards gzip; lower numbers now compress less but faster
* also, a \"-0\" option as fast as \"gzip -9\" has been added
* the compression of option -9 has been slightly increased
* the \"--merge\" option, which tries to produce a correct file by merging the good parts of two or more damaged copies, has been added to lziprecover: for large files with small errors, the probability of producing a correct file approaches 100 percent
* lziprecover is now able to repair any 1-byte error in the lzma stream of damaged lzip files
* Sat Apr 10 2010 pascal.bleserAATTopensuse.org- update to 1.10:
* a file specified with the \"-o\" option is now created with write permission for all if umask allows it, and it is deleted if lzip is interrupted by the user
* the dictionary size for the options -2, -3, -4, and -8 has been changed to improve linearity of compressed sizes
* Tue Jan 19 2010 pascal.bleserAATTopensuse.org- update to 1.9:
* Lzip now returns at least 1 if closing stdout fails
* lintian warnings in Debian about man pages have been fixed
* the \"COPYING\" file is no longer used as data for testing
* Fri Sep 04 2009 pascal.bleserAATTopensuse.org- update to 1.8:
* compression time has been reduced by 4%- changes from 1.7:
* lzdiff and lzgrep have been renamed to zdiff and zgrep and moved to the new package zutils (http://freshmeat.net/projects/zutils)
* compilation warnings on systems where uint32_t... != unsigned int have been fixed.
* Tue Jun 23 2009 pascal.bleserAATTopensuse.org- update to 1.6:
* decompression time has been reduced by 17%
* decompression support for the \"Sync Flush marker\" from lzlib has been added
* man pages for lzdiff, lzgrep, and lziprecover have been added to the distribution
* memory use has been reduced to 9x if the input file is smaller than dictionary size limit
* flush calls have been added to decompressor to allow partial recovery of the uncompressed data when decompressing a corrupt file
* the dependence of \"--test\" on the existence of \"/dev/null\" has been removed
* some \"bashisms\" have been removed from lzdiff and lzgrep
* Wed Apr 15 2009 pascal.bleserAATTopensuse.org- update to 1.5
* Mon Dec 22 2008 guruAATTunixtech.be- update to 1.3
* Tue Nov 18 2008 guruAATTunixtech.be- update to 1.1:
* the short name of the option \"--dictionary-size\" has been changed to \"-s\"
* the short name of the option \"--match-length\" has been changed to \"-m\"
* some user messages have been improved
* Tue Oct 14 2008 guruAATTunixtech.be- update to 1.0:
* small changes have been made to the documentation and user messages
* Wed Oct 01 2008 guruAATTunixtech.be- update to 0.5:
* decompression speed has been improved by 1%
* Wed Sep 24 2008 guruAATTunixtech.be- update to 0.4:
* this release regains the compression ratio of version 0.2 with a speed that is a 5% faster
* a compilation problem on systems where \"size_t\" is different from \"unsigned int\" has been fixed
* Mon Sep 15 2008 guruAATTunixtech.be- new package