Changelog for pv-debugsource-1.8.5-slfo.1.1.9.x86_64.rpm :

* Wed Feb 14 2024 pgajdosAATTsuse.com- version update to 1.8.5
* Corrected percentage formatting so it does not jump from 2 to 3 characters wide at 100%.
* Replaced `--remote` mechanism to use a temporary file instead of SysV IPC, so it can work reliably even when there are multiple pv instances.
* feature: new `--discard` option to discard input as if writing to /dev/null.
* feature: new `--error-skip-block` option to make `--skip- errors` skip whole blocks.
* feature: use `posix_fadvise()` like cat(1) does, to improve efficiency.
* security: with `--pidfile`, write to a temporary file and rename it into place, to improve security.
* security: ignore _TMP_ / _TMPDIR_ environment variables when using a terminal lock file.
* Only report errors about missing files when starting to transfer from them, not while calculating size, and behave more like cat(1) by skipping them and moving on.
* Auto-calculate total line count with `--line-mode` when all inputs are regular files.
* Cope with machine suspend/resume and botched timestamps.
* If `--width` or `--height` were provided, do not change them when the window size changes.
* When a file descriptor position in `--watchfd` moves backwards, show the rate using the correct prefix.
* Rewrite terminal state save/restore so state is not intermittently garbled on exit when using `--cursor`.
* Licensing change from Artistic 2.0 to GPLv3+.
* Thu Nov 30 2023 pgajdosAATTsuse.com- disable testsuite for s390x [bsc#1215338]- remove _constraints again as it didn\'t help- deleted sources - _constraints (not needed)
* Wed Nov 15 2023 pgajdosAATTsuse.com- increase required memory in _constraints [bsc#1217165] (tests still fails in ETA related tests)
* Tue Sep 26 2023 pgajdosAATTsuse.com- add _constraints [bsc#1215338]
* Sun Jul 30 2023 jengelhAATTinai.de- Update to release 1.7.24
* correct terminal size detection (was broken by 1.7.17)
* Fri Jul 28 2023 jengelhAATTinai.de- Update to release 1.7.18
* New \"--sync\" option to flush cache to disk after every write
* New \"--direct-io\" option to bypass cache
* Mon Jul 17 2023 jengelhAATTinai.de- Update to release 1.7.0
* The \"--size\" option now accepts \"AATTfilename\" to use the size of another file.
* New \"--bits\" option to show bit count instead of byte count.
* New \"--average-rate-window\" option, to set the window over which the average rate is calculated, also used for ETA.
* The \"--watchfd\" option will now show relative filenames, if they are under the current directory.
* Add burst rate limit to transfer, so rate limits are not broken by bursty traffic.
* Corrected elapsed time display to show as D:HH:MM:SS after 1 day, like the ETA does.
* Fri Nov 05 2021 jengelhAATTinai.de- Update to release 1.6.20
* Starting pv in the background no longer immediately stops unless the transfer is to/from the terminal.
* Using -B, -A, or -T now switches on -C implicitly.
* Tue Sep 08 2020 jengelhAATTinai.de- Trim old specfile constructs.
* Mon Aug 07 2017 jengelhAATTinai.de- Update to new upstream release 1.6.6
* Fix target buffer size (-B) being ignored
* Cap read/write sizes, and check elapsed time during read/write cycle to avoid display hangs with large buffers or slow media.
* Report error in \"-d\" if process fd directory is unreadable, or if process disappears before we start the main loop.
* Fri Mar 27 2015 jengelhAATTinai.de- Update to new upstream release 1.6.0
* new option \"-D\" / \"--delay-start\" to only show bar after N seconds
* new option \"--fineta\" / \"-I\" to show ETA as time of day rather than time remaining
* change ETA (--eta / -e) so that days are given if the hours remaining are 24 or more
* repeat read and write attempts on partial buffer fill/empty to work around post-signal transfer rate drop
* output errors on a new line to avoid overwriting transfer bar
* Mon Dec 08 2014 jengelhAATTinai.de- Update to new upstream release 1.5.7
* show KiB instead of incorrect kiB
* work around awk bug in tests/016-numeric-timer in decimal \",\" locales
* Mon May 05 2014 jengelhAATTinai.de- Update to new upstream release 1.5.3
* Added new display options --buffer-percent, --last-written
* New transfer option --no-splice
* New option --watchfd to monitor file descriptor status of another process, rather than moving data from stdin to stdout.
* Mon Aug 12 2013 jengelhAATTinai.de- Update to new upstream release 1.4.12
* A fix for splice() not using stdin was implemented
* A new -0/--null option has been added to count NUL-terminated \"lines\"
* Wed Jun 05 2013 jengelhAATTinai.de- Add explicit BuildRequires for usleep
* Fri Jan 25 2013 jengelhAATTinai.de- Update to new upstream release 1.4.6
* updated manual page to show known problem with \"-R\" on Cygwin
* added patch from Pawel Piatek to omit O_NOFOLLOW in AIX
* Mon Dec 24 2012 jengelhAATTinai.de- Update to new upstream release 1.4.4
* fix crash when progress is displayed with too-small terminal
* new option --skip-errors
* new option --stop-at-size to stop after --size bytes
* autodetermine size if stdout is a block device
* fix a use-after-free bug
* Tue Nov 20 2012 jengelhAATTinai.de- Update to new upstream release 1.3.9
* new --pidfile option to save process ID to a file
* integrated patch for --numeric with --timer and --bytes
* removed signalling from --remote to prevent accidental process kills
* new --format option and allow --format parameters to be sent with --remote
* Sat Sep 01 2012 jengelhAATTinai.de- Update to new upstream release 1.3.4
* new --disable-splice configure script option
* fixed line mode size count with multiple files- Use RH-friendly make install
* Mon Jun 25 2012 pascal.bleserAATTopensuse.org- update to 1.3.1:
* do not use splice() if the write buffer is not empty- changes from 1.3.0:
* fix 1024-boundary display garble
* use splice(2) where available
* added known bugs section of the manual page
* use IEEE1541 units
* bug with rate limit under 10 fixed
* speed up PV line mode
* Tue May 22 2012 jengelhAATTinai.de- Feed through format_spec_file to get copyright header required for factory inclusion
* Mon Feb 20 2012 jengelhAATTmedozas.de- Update license field to SPDX format- Use short URL- Remove redundant tags/sections from specfile- Parallel build with %_smp_mflags
* Fri Jan 14 2011 pascal.bleserAATTopensuse.org- change RPM group to System/Base instead of invalid group System/Tools
* Tue Dec 14 2010 pascal.bleserAATTopensuse.org- update to 1.2.0:
* an average rate display option was added to better show progress with bursty traffic
* a consistent exit status is set to help script writers
* various minor cleanups and bug fixes were made
* Tue Nov 09 2010 pascal.bleserAATTopensuse.org- moved to utilities
* Thu Mar 06 2008 guruAATTunixtech.be- new upstream version
* Mon Oct 22 2007 guruAATTunixtech.be- moved to openSUSE Build Service
* Thu Aug 30 2007 guruAATTunixtech.be- new upstream version
* Fri Aug 03 2007 guruAATTunixtech.be- new upstream version
* Mon Feb 05 2007 guruAATTunixtech.be- new upstream version
* Tue Feb 28 2006 guruAATTunixtech.be- new upstream version
* Thu Dec 08 2005 guruAATTunixtech.be- added debuginfo support- use makeinstall macro- use configure macro- added autoreconf- use install_info SUSE macros- use find_lang macro- rewrote spec file- new upstream version
* Fri Jun 17 2005 guruAATTunixtech.be- version 0.9.1
* Sun Nov 07 2004 guruAATTunixtech.be- version 0.8.9
* Mon May 03 2004 guruAATTunixtech.be- version 0.8.5
* Sun Apr 25 2004 guruAATTunixtech.be- version 0.8.2
* Tue Apr 20 2004 guruAATTunixtech.be- version 0.8.1
* Sun Feb 08 2004 guruAATTunixtech.be- version 0.7.0
* Tue Jan 06 2004 guruAATTunixtech.be- new spec-file