Changelog for wavemon-debuginfo-0.9.6-lp160.1.2.x86_64.rpm :

* Sat Jul 13 2024 Martin Hauke - Update to version 0.9.6 Enhancements and Fixes
* Info Screen: + Fix hanging receive by switching to non-blocking netlink socket. Miscellaneous
* Bump autoconf minimum version to 2.7.1.
* Wed Nov 01 2023 Martin Hauke - Update to version 0.9.5 Enhancements and Fixes:
* Info Screen: + improve format of percentages (use fixed format rather than auto-format). Configuration: + fix ncurses support for white backgrounds. + configuration file now either in $XDG_CONFIG_HOME/wavemon/wavemonrc or in $HOME/.config/wavemon/wavemonrc Miscellaneous
* avoid including include linux/if.h
* check and set support for C99 standard
* configuration file can now be located in XDG_CONFIG_HOME
* added portable implementation of asprintf(3),
* updated copied nl80211 header file,
* make -Wpedantic the default when building.
* Sun Dec 25 2022 Luigi Baldoni - Update to version 0.9.4 Enhancements and Fixes:
* Info Screen + fix mis-spelled format identifier + add fields for carrier / link mode, + handle (accidentally) positive signal levels + fix display of bonded interfaces + add more network information + add IPv6 support + use error-checking mutexes + display MCS bitrate information
* Scan Screen + do not enable scan if rfkill is enabled + unblock data mutex at end (fixing a deadlock condition) + reset filter when there are no results
* History Screen + deprecate threshold actions (were not of much use) + remove support for noise levels + add missing #include + add wide-character support + reset data when switching between interfaces
* Menu Bar + improve highlighting of selected entries Miscellaneous:
* drop dependency on wireless extensions
* build uses correct ncurses flags
* build now uses -Wextra by default
* build now honours configure CFLAGS
* update README
* document how to use wavemon within screen
* list of wireless interfaces is now also populated via nl80211 (no longer ioctl)
* Sat Dec 26 2020 Martin Hauke - Update to version 0.9.3 Fixes General
* proper rendering on UTF-8 terminals (#70),
* enabled by using libncursesw in place of libncurses,
* and using wide-characters for rendering where supported. Fixes Info Screen:
* properly clear area when updating with new data,
* do not leave rx / tx empty when no data available (use \'n/a\' instead),
* improve rendering on some terminal types (e.g. ansi),
* refresh immediately after a window-size change; Fixes History Screen:
* do not display noise / SNR levels when such data is not reported by the driver; Fixes Scan Screen:
* fix segmentation fault when no CAP_NET_ADMIN permissions
* fix locking bug (#78), redoing the original and incorrect fix;
* as a result, screen now retains data when switching windows; Fixes Conf Screen:
* fix memory leak identified in #73,
* reorganize into sections via separators. Miscellaneous
* Keyboard shortcuts: can now use 0..9 in place of F10, F1..F9;
* Scan screen: increased the usable window size by 1 line;
* Build: updated several outdated build/bootstrap files.
* Sat Oct 24 2020 Martin Hauke - Update to versino 0.9.2 General
* proper rendering on UTF-8 terminals (#70),
* enabled by using libncursesw in place of libncurses,
* and using wide-characters for rendering where supported. Info Screen:
* properly clear area when updating with new data,
* do not leave rx / tx empty when no data available (use \'n/a\' instead),
* improve rendering on some terminal types (e.g. ansi),
* refresh immediately after a window-size change; History Screen:
* do not display noise / SNR levels when such data is not reported by the driver; Scan Screen:
* fix segmentation fault when no CAP_NET_ADMIN permissions,
* fix locking bug (#78), redoing the original and incorrect fix (#42), as a result, screen now retains data when switching windows; Conf Screen:
* fix memory leak identified in #73,
* reorganize into sections via separators. Miscellaneous
* Keyboard shortcuts: can now use 0..9 in place of F10, F1..F9 (#76);
* Scan screen: increased the usable window size by 1 line;
* Build: updated several outdated build/bootstrap files.
* Mon Mar 16 2020 Martin Pluskal - Clean up spec file with spec-cleaner
* Mon Dec 30 2019 Martin Hauke - Update to version 0.9.1 Fixes
* Compatibility: - replace non-portable on_exit with portable at_exit - address gcc8 compiler warnings;
* Scan Screen: - fix memory leak in scan handler
* Info Screen: - fix logic around uninitialized variable
* Configuration Screen: - fix numerical key issue on ARM 32bit (Raspberri Pi 2)
* Sat May 18 2019 Martin Hauke - Update to version 0.9.0 General
* wavemon now has a transparent background. Fixes
* Info Screen: - disable locale to avoid funny thousand separators - prefer station signal over average station signal
* Scan Screen: - fix bug in displaying TLV elements - restore interface state on exit Miscellaneous
* more fixes for reproducible builds - time/date display is gone
* various code updates (new nl80211.h) and clean-ups.
* Sun Feb 18 2018 mardnhAATTgmx.de- Remove patch:
* reproducible.patch (fixed upstream)- Update to version 0.8.2
* Fixes - Info Screen: + do not warn about missing data if driver returns 0 signal value (#44), + present retry/drop rate also as percentage (#38), + remove outdated WEP encryption key information (#8); - Scan Screen: + revise and improve access to thread data (#42).
* Miscellaneous - build process now sorts input files for reproducible builds - miscellaneous fixes, such as typos, email information - code clean-up
* Tue May 23 2017 bwiedemannAATTsuse.com- Override BUILD_DATE for reproducible builds- Add reproducible.patch to avoid random link order
* Mon May 08 2017 mpluskalAATTsuse.com- Use pkgconfig style dependencies
* Mon May 08 2017 mardnhAATTgmx.de- Update to version 0.8.1
* fix for musl build thanks to AATTjoerg-krause
* resolved #19, #22, #23, #28
* info screen: replace interval timer with pthread
* fixed an illegal free (found on ARM), which seems to also have caused a memory leak on ARM.- Update to version 0.8.0
* majority of WEXT functions now replaced by nl80211
* scan screen has more information (channel utilisation) and sorting mode (MAC addresses)
* info screen contains more output, tested new support
* for displaying noise floor data (based on nl80211)
* random signal generator option was dropped
* Wed Apr 08 2015 p.drouandAATTgmail.com- Update to version 0.7.6
* complete redesign based on pthreads to fix terminal bug, as a result of better design the scan window now also can be suspended (details of fix are below),
* add message for \'too much data\' (E2BIG) error case,
* use same formatting (3 digits) for 2/5 GHz,
* support for changing sort order via keyboard shortcuts (see manpage, several ascending/descending sort orders are now available directly on the screen),
* currently active sort order is now displayed on status line at the bottom,
* stabilized by-channel sort to always use the same order for identical channels,
* added \'sort by Essid\' to selection of sort menus;
* add percentage for easier reading of link quality,
* deprecate use of locale settings for \'discard\' information (fixes display);
* add support for Page Up/Down, Home, and End buttons to ease navigation,
* added more information to \'-v\' version information (ncurses/WE versions);
* fix bug in ranking top/bottom 3 channels in scan window,
* complete redesign of scan process based on pthreads to fix bug that became visible on ncurses >= 5.9.20130504 (slackware 14.1 and debian jessie), caused by child/parent both updating the same screen (bug had been hidden by the internal buffering of ncurses which was then removed),- For changes from previous versions, please read the NEWS file- Update download and project Urls- Remove autoconf require; not needed anymore- Remove wavemon-optflags.diff; cflags are passed by configure script- Remove obsolete %clean and AUTHORS section- Enable parallel building with %{?_smp_mflags}
* Wed Dec 21 2011 cooloAATTsuse.com- add autoconf as buildrequire to avoid implicit dependency
* Wed Dec 21 2011 cooloAATTsuse.com- remove call to suse_update_config (very old work around)
* Mon Apr 12 2010 davejplaterAATTgmail.com- Update to version 0.6.10 Removed all patches except wavemon-optflags.diff.-
*Bug Fixes: fixed installation bug which caused manpages to be installed in /man; fixed mode of installation to support sandbox-builds on Gentoo (Lovelace); improved (automated) linking process, now possible to pass LDFLAGS (Boeck); bail out when no statistics are available, instead of flagging an error.- See /usr/share/doc/packages/wavemon/NEWS for all changes since version 0.4b.
* Fri Jun 19 2009 cooloAATTnovell.com- disable as-needed for this package as it fails to build with it
* Fri Jan 02 2009 lmuelleAATTsuse.de- Handle dBm values in /proc/net/wireless as displayed when IW_QUAL_DBM is set by the driver; (bdo#426300); (bnc#463032).
* Wed Oct 08 2008 lmuelleAATTsuse.de- Fix ordered comparison of pointer with integer zero; (bnc#433389).
* Thu Apr 05 2007 ssommerAATTsuse.de- added ncurses-devel to BuildRequires- fixed includes for newer kernel headers
* Sat Nov 11 2006 ajAATTsuse.de- Fix permissions on man pages.
* Wed Jan 25 2006 mlsAATTsuse.de- converted neededforbuild to BuildRequires
* Mon Oct 31 2005 dmuellerAATTsuse.de- don\'t build as root
* Sun Feb 06 2005 meissnerAATTsuse.de- truly use rpm_opt_flags, fixed warnings and gcc4 compile problems.
* Thu Apr 17 2003 lmuelleAATTsuse.de- inital SuSE RPM