Changelog for apcupsd-debuginfo-3.14.13-8.45.x86_64.rpm :

* Mon Jul 13 2015 tchvatalAATTsuse.com- Ensure locfile is properly set bnc#929444
* Sat Apr 18 2015 matwey.kornilovAATTgmail.com- Move
*.cgi scripts to apcupsd-cgi package (fix boo#925886)
* Thu Apr 02 2015 tchvatalAATTsuse.com- Version bumpt o 3.13.13:
* apcaccess and apcupsd status format updates to ease parsing by scripts
* UPS name is included in subject line of emails in default scripts
* Default event scripts pull SYSADMIN and APCUPSD_MAIL definitions from a common config file so they can easily be configured in one place
* MODBUS USB support Previous releases supported MODBUS serial (RS232). This release adds support for MODBUS over USB. This protocol is preferable to the normal USB HID driver because it offers access to more UPS data readouts and controls. The only configuration file change needed versus MODBUS serial is to change UPSCABLE to usb and use an empty DEVICE setting. See the MODBUS section of the apcupsd manual for more details.
* Support for Apple Notification Center on Mac OS X (replaces Growl)
* Apple install packages and binaries are signed with an Apple Developer key for compatibility with Gate Keeper
* Windows USB driver has been updated with additional USB identifiers to support future APC products.
* Fix issue with certain Back-UPS USB models repeatedly cycling power on/off after killpower is issued
* Fix display of battery level during MODBUS calibration
* Fix apctest EEPROM setting on various models
* Close and reopen serial port during extended COMMLOST in apcsmart driver (helps recover connection when USB serial port dongles are reconnected)
* Avoid probing non-APC USB devices as it can cause lockups
* Fix issue with service failing to start on Windows during boot with USB UPS
* Fix bogus lock file error when config file error forces early termination
* Fix MODBUS NOMOUTV reading for voltages other than 120VAC
* Fix LOADPCT (CI_LOAD) on MODBUS driver
* Fix issue with net driver not reporting MODEL value
* Fix several potential issues identified by Coverity static analysis
* Numerous other fixes and improvements all over the code, many of them submitted by users...Thank you!- Refreshed patches:
* apcupsd-3.14.1-cloexec.patch
* apcupsd-3.14.8-cxxld.patch
* apcupsd-gpp.patch- Removed patch:
* apcupsd-3.14.10-nodbg.patch
* Thu Apr 02 2015 tchvatalAATTsuse.com- Cleanup with spec-cleaner- Remove patch that is never applied today:
* apcupsd-powersave.patch
* Tue Dec 02 2014 sbrabecAATTsuse.cz- Fix removal of HALT_POWERDOWN_INSERT (bsc#907702).
* Sun Nov 16 2014 matwey.kornilovAATTgmail.com- Add patch apcupsd-3.14.10-nodbg.patch: reduce amount of debug messages (redhat #1053324)
* Sun Nov 16 2014 matwey.kornilovAATTgmail.com- fix HIBERNATE variable initialization in apccontrol script
* Tue Aug 19 2014 wagner-thomasAATTgmx.at- added config for SuSEfirewall2
* Wed May 14 2014 meissnerAATTsuse.com- %service_add_pre in %pre section missing, added.
* Fri Feb 14 2014 sbrabecAATTsuse.cz- Replace pm-utils support by systemd (FATE#316824). add: apcupsd-pm-utils.patch (for old products only) replace: apcupsd.hibernate update: apcupsd-hibernate.patch, README.SUSE- Fix init script references to apcupsd-lite. update: apcupsd.init
* Wed Feb 12 2014 sbrabecAATTsuse.cz- Updated to version 3.14.11:
* APC MODBUS protocol support over RS232 For more see ReleaseNotes.- Verify GPG signature.- Remove obsolete apcupsd-early-powerdown script.- Remove upgrade scripts for SuSE Linux 8 and SLES 8.- Do not call powersave-notify (regression bnc#856907).
* Thu Jan 09 2014 p.drouandAATTgmail.com- Add %fillup_prereq PreReq tag and %{fillup_only} in %post to correctly fillup sysconfig file; fix bnc#837337
* Sun Mar 10 2013 dimstarAATTopensuse.org- Update apcupsd-3.14.8-systemd.patch: apcupsd lives in /usr/sbin, not in /sbin (bnc#801312).
* Fri Jan 11 2013 cfarrellAATTsuse.com- license update: GPL-2.0
* Fri Jan 11 2013 ajAATTsuse.de- Remove patch apcupsd-largebuf-overflow.patch, it\'s upstream now
* Fri Jan 11 2013 cooloAATTsuse.com- fix build on factory - systemd moved to /usr
* Fri Sep 14 2012 p.drouandAATTgmail.com- Updated to version 3.14.10:
* Fix missing status and spurrious incorrect status on newer BackUPS CS models using USB interface.
* USB compatibility fixes for Mac OS X Lion
* USB driver support for newer Microlink models on Mac OS X Lion and Windows
* Ignore transitions to battery due to calibration (possible if user initiates calibration, then exits apctest and starts apcupsd before calibration completes.
* Fix truncation of long UPS model names such as \"Smart-UPS RT 5000 XL\"
* Fix MODEL vs. APCMODEL confusion. Remove APCMODEL and rename old MODEL aka \'mode\' to DRIVER.- Improve Systemd and logrotate support- Remove apcupsd-lite support : difference between apcupsd-lite and apcupsd are minimal or cpu consumption don\'t justify his presence
* Tue May 29 2012 jengelhAATTinai.de- Adjust directory name to source config.guess/sub from to be a /little/ more future proof.
* Thu Mar 01 2012 ajAATTsuse.de- Buildrequire xorg-x11-devel
* Wed Feb 08 2012 dvaleevAATTsuse.com- fix ppc64 build
* Tue Jan 31 2012 sbrabecAATTsuse.cz- Mark all files in /etc/apcupsd as config files. Their editing sometimes makes sense (bnc#744358).
* Tue Dec 20 2011 cooloAATTsuse.com- remove call to suse_update_config (very old work around)
* Mon Oct 17 2011 mkubecekAATTsuse.cz- apcupsd-3.14.8-exit-race.patch: When terminating apcupsd, cancel other threads before cleanup to avoid race condition and possible segfault (bnc#724487).- Change build requirement from sysvinit to sysvinit-init for 12.1
* Sat Sep 17 2011 jengelhAATTmedozas.de- Remove redundant tags/sections from specfile- Use %_smp_mflags for parallel build
* Thu Aug 25 2011 sbrabecAATTsuse.cz- Implemented hibernate on power fail (bnc#703592#c39).
* Tue Aug 02 2011 sbrabecAATTsuse.cz- Fixed init check to succeed with unmounted /usr (bnc#703592#c23).
* Mon Jul 04 2011 sbrabecAATTsuse.cz- Updated to version 3.14.8:
* Implement battery calibration and self-test interval in apctest for USB models.
* Add support for turning the UPS off completely.
* Updates of SNMP code.
* Add support for reading battery voltage from the PowerSummary.
* Switch time/date output format to simplified ISO.
* Compilation warning fixes.
* Other bug fixes and improvements.
* Documentation improvements.- Removed HAL support.
* Thu Mar 24 2011 vcizekAATTnovell.com- fixed apcupsd-lite path in init script (reported later as bnc#703592)
* Tue Jul 27 2010 cristian.rodriguezAATTopensuse.org- avoid leaking file descriptors (use CLOEXEC, patch from Fedora)
* Wed Mar 31 2010 cooloAATTnovell.com- package requires sysvinit to build
* Mon Feb 15 2010 seifeAATTopensuse.org- add missing hal directories to pass rpmlint checks
* Mon Feb 15 2010 seifeAATTopensuse.org- fix build with newer net-snmp by undefining MIB
* Fri Oct 30 2009 sbrabecAATTsuse.cz- Require distribution-release, not dummy-release (bnc#550230).
* Mon Jun 29 2009 sbrabecAATTsuse.cz- Updated to version 3.14.6:
* Major updates to the User Manual.
* New manpages for apcupsd, apcupsd.conf, apctest, apcaccess, and apccontrol.
* Add support for turning the UPS off completely.
* apcsmart: Deadlock fixes during comms failures.
* linux-usb: Fix out-of-bounds array access.
* Fix build with gcc-4.4.
* apcsmart: Fix crash during process shutdown (SIGTERM).
* Several other minor fixes and improvements.
* Tue Jun 02 2009 crrodriguezAATTsuse.de- fix build
* Wed Feb 25 2009 roAATTsuse.de- run suse_update_config in autoconf directory to fix build on ppc64
* Wed Jan 28 2009 sbrabecAATTsuse.cz- Updated to version 3.14.5:
* docs: Document the /refresh switch for apctray.
* apctest: Do not create pid file.
* gapcmon: Network connect timeout fix.
* Fix a few unsafe uses of sprintf and strcat.
* gapcmon: Iconify fixes for KDE
* Fix LOWBATT glitch handling bug.
* Support shutting down apcupsd instances running in other sessions.
* docs: PCNET username and password details.
* Fri Sep 19 2008 roAATTsuse.de- buildreq dummy-release instead of openSUSE-release
* Mon Jul 14 2008 sbrabecAATTsuse.cz- Updated to version 3.14.4:
* Build system rewrite.
* Built-in version of libgd for multimon cgi has been removed
* Removal of NLS support.
* Powerflute has been disabled.
* gapcmon: Corrected the use of NOMPOWER and the calc of current usage amount.
* Add a heuristic to fix up incorrect NOMINV or NOMOUTV.
* Fix hal policy file syntax.
* A HAL policy file is automatically installed on Linux systems to disable the hald-addon-hid-ups module which conflicts with apcupsd\'s control of USB UPSes.
* Add support for Nominal Power.
* Add units to NOMINV, NOMOUTV, and NOMBATTV stats.
* Eliminate warnings emitted from gcc-4.2.1.
* Fix killpower and eeprom settings bug on USB models introduced when INPUT reports were prioritized over FEATURE reports.
* Fix bugs that could cause NIS-net driver to get stuck waiting for comms to be restored instead of shutting down.- Fixed UPS shutdown on systems with /usr on a different file system (bnc#407269).
* Wed Feb 20 2008 jdelvareAATTsuse.de- Remove duplicate index.html file in documentation, create a symbolic link instead to save some disk space.- Fix rpmlint warnings about bad end-of-line encoding of some documentation files.
* Mon Feb 18 2008 jdelvareAATTsuse.de- Package apctest.8 properly.- Convert the user\'s guide to HTML before packaging it. Not that many users know what to do with latex source files (361885).- Do not package the uninteresting or redundant documentation. This makes the package 4 times smaller (installed size divided by 15, from 33.1 MB to 2.2 MB on i386) (361885).
* Mon Jan 21 2008 sbrabecAATTsuse.cz- Updated to version 3.14.3:
* HAL policy file is automatically installed on Linux systems to disable the hald-addon-hid-ups module which conflicts with apcupsd\'s control of USB UPSes. The file is automatically removed when apcupsd is uninstalled.
* Add support for Nominal Power (aka Configured Active Power) reading.
* Add units to NOMINV, NOMOUTV, and NOMBATTV stats.
* Eliminate some gcc warnings.
* Fix killpower and eeprom settings bug on USB modules introduced when INPUT reports were prioritized over FEATURE reports.
* Fix bugs that could cause NIS-net driver to get stuck waiting for comms to be restored instead of shutting down.- Fixed possible buffer overflow.- Removed support for SuSE Linux <= 10.0.
* Mon Jan 14 2008 sbrabecAATTsuse.cz- Updated to version 3.14.2:
* USB fix for BackUPS LCD series. This fix carries a risk of breaking other models, but test results are positive so far.
* Fix linux-usb device detection bug when multiple hiddev nodes are present. Fixes Fedora#245864:
* Fix SNMP port selection when using SNMP driver.
* Add workaround for broken BackUPS Pro model that returns certain reports encoded in ASCII.
* apcsmart: Wait 20 seconds before declaring COMMLOST.
* Documentation updates: Fix up udev info for modern Linux distros.
* Don\'t leak unnecessary descriptors to child when execing apccontrol.
* Fix bug with multi-threaded net_open() calls.
* Correct multimon.conf humidity monitoring. (Novell#199834)
* Fix race between attach_ups() and detach_ups().
* Remove dependency on libc++ (again).
* Thu Aug 23 2007 sbrabecAATTsuse.cz- Fixed multimon.conf comments for humidity measurement (#199834).
* Mon Jul 23 2007 roAATTsuse.de- fix build
* Wed Jul 04 2007 sbrabecAATTsuse.cz- Updated to version 3.14.1:
* PCNET driver supports remote shutdown request from UPS web interface
* Fix potential NIS client lockup when server disappears.
* Fix crash when displaying EEPROM values more than once.
* Increase self-test timeout to 40 seconds to accomodate the RS 800.
* Rewrite device opening logic to be more reliable.
* Do not attempt to cancel shutdowns.
* Wed May 23 2007 roAATTsuse.de- fix some rpmlint errors
* Wed Apr 11 2007 sbrabecAATTsuse.cz- Updated to version 3.14.0:
* New stable release.
* Bug fixes.
* Thu Nov 16 2006 mrueckertAATTsuse.de- added apcupsd-3.13.9_missing_netsnmp_include.patch: include for net-snmp-config.h was missing.
* Mon Nov 06 2006 roAATTsuse.de- fix permissions for icon files
* Fri Oct 20 2006 sbrabecAATTsuse.cz- Updated to version 3.13.9:
* Runtime configurable paths for apccontrol.
* Ambient temperature is reported for USB UPSes with a AP9612 SmartSlot card.
* pcnet driver detects COMMLOST and SelfTest events.
* pcnet driver supports killpower (turning off UPS output power).
* Bug fixes.
* Wed Sep 20 2006 sbrabecAATTsuse.cz- Build correctly in older products.
* Wed Sep 20 2006 sbrabecAATTsuse.cz- Create /sbin/apcupsd-lite, working with unmounted /usr (#186606).- Call killpower only if power is failing (#186606#6) (#187454).- Minor fixes of previous update.
* Mon Sep 18 2006 sbrabecAATTsuse.cz- Updated to version 3.13.8:
* GUI monitoring application, gapcmon.
* Bug fixes.
* Tue Sep 12 2006 ajAATTsuse.de- Adjust BuildRequires.
* Mon Apr 03 2006 sbrabecAATTsuse.cz- Do not remove /etc/nologin, if changes are disabled (#161709).
* Sat Mar 25 2006 roAATTsuse.de- remove second preun script
* Fri Mar 24 2006 sbrabecAATTsuse.cz- Removed fast incorrect shutdown script (#132478).- Added README.SUSE.- Integrated with powersave.- Do not strip binaries.- Simplified neededforbuild.- Removed obsolete halt-setup.sh and clean halt.local.- Scriptlet fixes.
* Wed Jan 25 2006 mlsAATTsuse.de- converted neededforbuild to BuildRequires
* Tue Jan 24 2006 roAATTsuse.de- disable parallel build, seems to cause trouble
* Thu Jan 12 2006 sbrabecAATTsuse.cz- Updated to version 3.12.1.
* Fri Sep 30 2005 sbrabecAATTsuse.cz- Updated to version 3.10.18 (#116685).
* Tue Jul 12 2005 sbrabecAATTsuse.cz- Updated to version 3.10.17a.- Moved binaries (linked against libraries in /usr) to /usr/sbin.
* Wed May 04 2005 sbrabecAATTsuse.cz- Removed START_APCUPSD from halt.local (#81281).
* Thu Jan 06 2005 sbrabecAATTsuse.cz- Updated to version 3.10.16.
* Tue Nov 30 2004 sbrabecAATTsuse.cz- Fixed OS misdetection (missing USB support, #48607). Patch from Andrea Arcangeli.
* Mon Aug 23 2004 sbrabecAATTsuse.cz- Updated to version 3.10.15.
* Mon Apr 19 2004 roAATTsuse.de- Force-define HID_MAX_USAGES- build using apache2
* Fri Mar 19 2004 sbrabecAATTsuse.cz- Removed
*.orig files from documentation.
* Thu Feb 05 2004 sbrabecAATTsuse.cz- Updated to version 3.10.11.
* Mon Nov 10 2003 roAATTsuse.de- use net-snmp instead of ucdsnmp
* Tue Sep 16 2003 kukukAATTsuse.de- Remove setuid bit from apcupsd (else SuSEconfig will do it)
* Mon Sep 01 2003 sbrabecAATTsuse.cz- Removed tcpd.h (use systemwide instead).
* Mon Sep 01 2003 sbrabecAATTsuse.cz- Added \"Should-Start: hotplug_usb\" to init script.- Fix and update hack of orphan fi in halt.local.- Fixed pre and postinstall scripts.- Really turned on and fixed SNMP support.
* Fri Aug 29 2003 kukukAATTsuse.de- Add \"Should-Start: serial\" to init script [Bug #28353]
* Fri Aug 15 2003 sbrabecAATTsuse.cz- Updated to development version 3.10.6-05Aug03.- Turned on all optional features.
* Mon Mar 10 2003 sbrabecAATTsuse.cz- Buffer overflow fixes.- Name clash and error handling fixes.
* Wed Feb 12 2003 sbrabecAATTsuse.cz- Updated to version 3.8.6.
* Thu Aug 15 2002 mciharAATTsuse.cz- added $remote_fs to Required-Start (should fix #17294)
* Thu Aug 01 2002 roAATTsuse.de- adapted to /srv/www- added prereqs
* Sat Jul 27 2002 adrianAATTsuse.de- fix build
* Mon Jan 07 2002 cihlarAATTsuse.cz- updated to version 3.8.5:
* Battery Runtime Calibration in the apctest program
* Resolved a crash caused by a lost TCP/IP connection
* Mon Dec 17 2001 cihlarAATTsuse.cz- updated to version 3.8.4-2:
* bug fix release
* Mon Dec 10 2001 cihlarAATTsuse.cz- removed START_APCUPSD
* Thu Nov 29 2001 cihlarAATTsuse.cz- update to version 3.8.3:
* updated manual
* several bug fixes
* added support for new hardware- fixed permissions of halt-setup.sh- fixed halt-setup.sh- moved halt-setup.sh from %postun to %preun
* Tue Nov 27 2001 cihlarAATTsuse.cz- fixed variable names in init script [#12451]
* Thu Jul 26 2001 cihlarAATTsuse.cz- fixed call of suse_update_config
* Wed Jul 25 2001 cihlarAATTsuse.cz- update to 3.8.2- added part with autoconf- compile with --with-libwrap and --enable-pthreads
* Thu Apr 12 2001 cihlarAATTsuse.cz- fixed init script by new skeleton
* Mon Jan 15 2001 cihlarAATTsuse.cz- added apctest
* Wed Jan 10 2001 cihlarAATTsuse.cz- update to 3.8.1- change to new init script mechanism- fixed initialization of halt.local- added BuildRoot- clean up spec file- bzipped sources- added fillup of rc.config
* Mon Jun 19 2000 kasalAATTsuse.de- Updated to 3.7.2. The package is still BETA, see \"Todo\" below.
* Sun Oct 10 1999 bkAATTsuse.de- new package, requested e.g by Andre Hedrick Todo: - polish /sbin/init.d/apcupsd and add links to the rcX.d directories - add the proper START_APCUPSD= fillup for /etc/rc.config - add the changes for halt.sh in the suse subdir