Changelog for john-debuginfo-1.8.0-9.20.x86_64.rpm :

* Thu Jun 25 2015 astiegerAATTsuse.com- fix SLE 11 SP3 build
* Mon Dec 15 2014 larsAATTlinux-schulserver.de- include \"jumbo patch\" into the build - special thanks to Mark Draheim for the specfile patch (closes bnc #839246)
* Fri Jan 10 2014 dvaleevAATTsuse.com- Fix build on ppc64le- added patches:
* ppc64le.patch
* Mon Oct 28 2013 schwabAATTsuse.de- Use the generic target for m68k
* Wed Oct 09 2013 larsAATTlinux-schulserver.de- update to 1.8.0: + Revised the incremental mode to let the current character counts grow for each character position independently, with the aim to improve efficiency in terms of successful guesses per candidate passwords tested. + Revised the pre-defined incremental modes, as well as external mode filters that are used to generate .chr files. + Added makechr, a script to (re-)generate .chr files. + Enhanced the status reporting to include four distinct speed metrics (g/s, p/s, c/s, and C/s). + Added the \"--fork=N\" and \"--node=MIN[-MAX]/TOTAL\" options for trivial parallel and distributed processing. + In the external mode compiler, treat character literals as unsigned. + Renamed many of the formats. + Updated the documentation. + Relaxed the license for many source files to cut-down BSD. + Relaxed the license for John the Ripper as a whole from GPLv2 (exact version) to GPLv2 or newer with optional OpenSSL and unRAR exceptions. + Assorted other changes have been made.- add simple man pages for relbench and mailer scripts- disable jumbo patch for now until a version for 1.8.0 is out
* Sun Mar 17 2013 schwabAATTsuse.de- Use the generic target for aarch64
* Sat Oct 20 2012 larsAATTlinux-schulserver.de- updated jumbo patch to 1.7.9-jumbo-7
* Fri Jul 13 2012 larsAATTlinux-schulserver.de- update to 1.7.9: + Added optional parallelization of the MD5-based crypt(3) code with OpenMP. + Added optional parallelization of the bitslice DES code with OpenMP. + Replaced the bitslice DES key setup algorithm with a faster one, which significantly improves performance at LM hashes, as well as at DES-based crypt(3) hashes when there\'s just one salt (or very few salts). + Optimized the DES S-box x86-64 (16-register SSE2) assembly code. + Added support for 10-character DES-based tripcodes (not optimized yet). + Added support for the \"$2y$\" prefix of bcrypt hashes. + Added two more hash table sizes (16M and 128M entries) for faster processing of very large numbers of hashes per salt (over 1M). + Added two pre-defined external mode variables: \"abort\" and \"status\", which let an external mode request the current cracking session to be aborted or the status line to be displayed, respectively. + Made some minor optimizations to external mode function calls and virtual machine implementation. + The \"--make-charset\" option now uses floating-point rather than 64-bit integer operations, which allows for larger CHARSET_
* settings in params.h. + Added runtime detection of Intel AVX and AMD XOP instruction set extensions, with optional fallback to an alternate program binary. + Added relbench, a Perl script to compare two \"john --test\" benchmark runs, such as for different machines, \"make\" targets, C compilers, optimization options, or/and versions of John the Ripper. + Additional public lists of \"top N passwords\" have been merged into the bundled common passwords list, and some insufficiently common passwords were removed from the list. + Many minor enhancements and a few bug fixes were made.- updated jumbo patch to 1.7.9-jumbo-6- specfile cleanup (using spec-cleaner)
* Fri Sep 30 2011 joop.boonenAATTboonen.org- Added a fix for the arm architecture, TARGET generic
* Fri Jul 08 2011 larsAATTlinux-schulserver.de- update to 1.7.8: + many changes, please see /usr/share/doc/packages/john/CHANGES + The bitslice DES S-box expressions have been replaced with those generated by Roman Rusakov specifically for John the Ripper + Added Intel AVX and AMD XOP instruction sets support for bitslice DES + Apache \"$apr1$\" MD5-based password hashes are now supported. + the loader now includes logic to warn the user of ambiguous hash encodings + \"DateTime\", \"Repeats\", \"Subsets\", \"AtLeast1-Simple\", \"AtLeast1-Generic\", and \"Policy\" external mode samples have been added to the default john.conf + A few minor bug fixes and enhancements were made + Corrected a logic error introduced in JtR 1.7.4.2: in \"single crack\" mode- added and updated jumbo patch
* Tue Mar 15 2011 drahtAATTsuse.de- go from jumbo patch 7 to 12- needs -lm to link, via LDFLAGS from make command in spec
* Thu Sep 09 2010 larsAATTlinux-schulserver.de- update to 1.7.6: + Generic crypt(3) support (enabled with \"--format=crypt\") has been added for auditing password hash types supported by the system but not yet supported by John\'s own optimized cryptographic routines (such as \"SHA-crypt\" and SunMD5). + Optional parallelization of the above has been implemented by means of OpenMP along with glibc\'s crypt_r(3) + Optional parallelization of John\'s own optimized code for the OpenBSD-style Blowfish-based crypt(3) (bcrypt) hashes with OpenMP has been added + A more suitable version of 32-bit x86 assembly code for Blowfish is now chosen on Core i7 and similar CPUs (in 32 bit mode) + More optimal DES S-box expressions for PowerPC with AltiVec + The bitslice DES C source code has been reworked to allow for the use of arbitrary SIMD intrinsics, which was previously only implemented for AltiVec as a special case + Support for SSE2 and MMX intrinsics with bitslice DES (as an alternative to the supplied assembly code) has been added (currently only enabled for SSE2 on x86-64) + Support for mixed-type longer virtual vectors (such as SSE2+MMX, SSE2+ALU, AltiVec+ALU, and other combinations) with bitslice DES has been added + The loader will now detect password hashes specified on a line on their own, not only as part of an /etc/passwd or PWDUMP format file + When run in \"--stdin\" mode and reading candidate passwords from a terminal (to be typed by the user), John will no longer mess with the terminal settings + John will now restore terminal settings not only on normal termination or interrupt, but also when forcibly interrupted with two Ctrl-C keypresses + A new numeric variable has been added to the word mangling rules engine: \"p\" for position of the character last found with the \"/\" or \"%\" commands + Support for the use of \"--format\" along with \"--show\" or \"--make-charset\" has been added + The choice of .rec and .log filenames for custom session names has been made more intuitive + Support for \"\\r\" (character lists with repeats) and \"\\p0\" (reference to the immediately preceding character list/range) has been added to the word mangling rules preprocessor + The undefined and undocumented behavior of some subtle word mangling rules preprocessor constructs has been changed to arguably be more sensible
* Thu Feb 11 2010 lruppAATTsuse.de- update to 1.7.4.2: + Major performance improvements + John will now tend to use more memory to achieve better speed + Some previously missed common website passwords found on public lists of \"top N passwords\" have been added to the bundled common passwords list. + Support for back-references and \"parallel\" ranges has been added to the word mangling rules preprocessor. + The notion of numeric variables has been introduced into the rules engine. + New rule commands have been added + New rule reject flags have been added + The default rulesets for \"single crack\" and wordlist modes have been revised to make use of the new features, for speed, to produce fewer duplicates, and to attempt additional kinds of candidate passwords. + The default for the Idle setting has been changed from N to Y.
* Mon Feb 08 2010 jengelhAATTmedozas.de- only build MMX variant on >= i586- guard TARGET=linux-x86-any with %ix86- enable building on sparcv9
* Mon Sep 28 2009 lruppAATTsuse.de- update to 1.7.3.4: + \"make check\" has been implemented + The \"--test\" option will now take an optional argument - the duration of each benchmark in seconds + Some very minor bugs that did not affect normal operation have been fixed. + Some unimportant compiler warnings have been fixed, a source code comment has been made more verbose and more complete.
* Tue Sep 09 2008 lruppAATTsuse.de- update to 1.7.3.1: + Two Blowfish-based crypt(3) hashes may now be computed in parallel for much better performance on modern multi-issue CPUs with a sufficient number of registers (e.g., x86_64). + New make targets: macosx-universal, macosx-x86-64, solaris-x86-64-cc, solaris-x86-64-gcc, solaris-x86-sse2-cc, solaris-x86-sse2-gcc, solaris-x86-mmx-cc, solaris-x86-mmx-gcc, solaris-x86-any-cc, linux-ia64; + Minor bug fixes. + \"DumbForce\" and \"KnownForce\" external mode samples have been added to the default john.conf.- removed the outdated patchset (needs to be re-integrated)
* Mon Sep 25 2006 lruppAATTsuse.de- remove double cflags definition
* Thu Jun 08 2006 lruppAATTsuse.de- new version 1.7.2- moved john.conf to /etc- moved john binary to /usr/bin- enabled some opt flags (must be tested)
* Wed May 17 2006 schwabAATTsuse.de- Use RPM_OPT_FLAGS.- Don\'t strip binaries.- Fix last change.
* Mon Mar 27 2006 lruppAATTsuse.de- use CFLAGS instead of params.h.patch
* Fri Mar 24 2006 lruppAATTsuse.de- charset.tar.bz2 is included upstream- reduce build requires- new version 1.7.0.2
* Mon Mar 13 2006 lruppAATTsuse.de- new version 1.7.0.1- adapt patches to new version- disabled some compiler fixes- removed RPM_OPT_FLAGS => performance issue atm
* Mon Mar 13 2006 lruppAATTsuse.de- split off worlists to an extra package
* Wed Jan 25 2006 mlsAATTsuse.de- converted neededforbuild to BuildRequires
* Sat Jan 14 2006 schwabAATTsuse.de- Don\'t strip binaries.- Fix ia64 configuration.
* Mon Dec 19 2005 aosthofAATTsuse.de- Fixed .spec file for all architectures besides x86- Added targets for ia64 / s390 / s390x
* Fri Nov 11 2005 kukukAATTsuse.de- Fix compiling with glibc 2.4 snapshot
* Wed Sep 14 2005 lruppAATTsuse.de- new version 1.6.39- use noreplace for config
* Wed Jun 15 2005 meissnerAATTsuse.de- use RPM_OPT_FLAGS.
* Sun Jun 05 2005 roAATTsuse.de- added directory to filelist
* Fri Jun 03 2005 lruppAATTsuse.de- changed manpage- added patches from ftp.openwall.com again: + blowfish (Eggdrop blowfish) + md5 (work with md5 hash of apache; faster) + rawMD5 + MySQL (about 75% faster than mysqlpassword.c)- enabled global mode in params.g again
* Mon May 30 2005 lruppAATTsuse.de- added \"all\" wordlist from openwall- enabled arch-support for sparc and ppc- added old doc-files from 1.6
* Wed May 25 2005 lruppAATTsuse.de- new package, version 1.6.38
* Tue Jan 25 2005 lruppAATTsuse.de- added some wordlists to get more options ;-)- added patches from ftp.openwall.com to provide support for additiional password formats: + blowfish + md5 + rawMD5
* Mon Aug 02 2004 lruppAATTsuse.de- - fixed BugTraq-ID: 43287- enabled global-mode in params.h- fix misspelling in manpage
* Fri Feb 27 2004 lruppAATTsuse.de- use devel version: no segfault on x86-64- included documentation and charsets from old version- renamed new john.conf in john.ini- created a short manpage for john- created symlink /var/lib/john/john
* Mon Nov 10 2003 roAATTsuse.de- use defattr
* Fri Nov 07 2003 lruppAATTsuse.de- added \'# norootforbuild\' in the spec-file
* Thu Jun 12 2003 poemlAATTsuse.de- add /var/lib/john to the filelist
* Fri May 23 2003 cooloAATTsuse.de- use BuildRoot
* Tue Sep 17 2002 roAATTsuse.de- removed bogus self-provides
* Fri Jul 05 2002 kukukAATTsuse.de- use %ix86
* Thu Mar 29 2001 uliAATTsuse.de- fixed for gcc >2.95- replaced config.guess stuff with %ifarch
* Wed Mar 01 2000 wernerAATTsuse.de- Fix config.guess selection
* Mon Sep 13 1999 bsAATTsuse.de- ran old prepare_spec on spec file to switch to new prepare_spec.
* Thu Mar 18 1999 uliAATTsuse.de- new package, version 1.6