Changelog for radvd-debuginfo-2.11-4.6.x86_64.rpm :

* Mon Apr 20 2015 mpluskalAATTsuse.com- As radvd does not build on older releases removing conditions and radvd.init- Use /var/run instead of /run- Depend on shadow for useradd
* Sat Apr 18 2015 mpluskalAATTsuse.com- Update to 2.11
* added --without-check option to configure- Cleanup spec-file with spec-cleaner- Add keyring for gpg signature
* Sun Mar 15 2015 p.drouandAATTgmail.com- Update to version 2.10
* Reverted random delay work because it broke detecting new interfaces in a timely manor.- Update radvd-configure.patch- Do not provide both sysvinit/systemd init files; it\'s redundant- Add a backward compatibility link for systemd
* Sun Nov 09 2014 Led - fix bashisms in post script
* Wed Jul 30 2014 sfalkenAATTopensuse.org- Update to version 2.2 minor fixes: Netlink: set setup_iface fix for down interface coming up split send_ra into smaller function orgainize struct Interface with nested structures time: Use clock_gettime and monotonic clock add disable_ipv6_autoconfig function so an interface radvd is using won\'t autoconfig itself using its own advert improved netlink message processing to
*only
* reinit an interface that changed. build fixes: Revert bison locations in order to support byacc Amend DIST_EXTRA with the make check files Add command line option parsing to the check unit test application Add make check target based on the check unit testing framework Add check in configure.ac for clock_gettime Makefile.am: Fix out of tree builds disable struct-overflow warning Add compiler attributes to type check format strings
* Wed Jul 30 2014 sfalkenAATTopensuse.org- Update to version 2.2
* Updated specfile to change /var/run to /run, in order to fix rpmlint check failures
* Added: radvd-2.2.tar.xz radvd-2.2.tar.xz.asc
* Removed: radvd-1.9.7.tar.xz radvd-1.9.7.tar.xz.asc
* Updated: 0001-run-as-user-radvd-by-default.diff radvd-configure.patch radvd.spec
* Thu Mar 13 2014 jbohacAATTsuse.cz- fix the radvd.service file to use /etc/sysconfig/radvd (bnc#854316)
* Fri Jan 10 2014 jbohacAATTsuse.cz- Update to version 1.9.7
* ioctl bug fix for getting the hardware address and mtu of an interface- Update to version 1.9.6
* Check AdvSendAdvert before sending an advertisement- Update to version 1.9.5
* IPv6 forwarding setting should be 1 or 2
* Performance fix in netlink message processing
* fix for kernels with no NETLINK_NO_ENOBUFS defined
* distributing gz, bz2 and xz tarballs
* also distributing md5, sha1, sha256 and gpg signatures- Update to version 1.9.4
* IPv6 forwarding setting should be 1 or 2
* Performance fix in netlink message processing
* fix for kernels with no NETLINK_NO_ENOBUFS defined
* distributing gz, bz2 and xz tarballs
* also distributing md5, sha1, sha256 and gpg signatures- Update to version 1.9.3
* check for sys/sysctl.h availability
* radvdump fix to interpret MTU and Route- Update to version 1.9.2
* A few minor Makefile.am fixes- Update to version 1.9.1
* Replacing a \'==\' in configure with \'=\' for better shell portability- added .asc (gpg key not yet found)
* Tue Nov 05 2013 speilickeAATTsuse.com- Don\'t start daemon after package installation, the default config is almost useless and previous package versions installed even bad ones into /etc/radvd.conf (it would never be fixed since the file is %ghost %config(noreplace)- Fix try-restart to only restart the daemon if it\'s actually running. Allow condrestart, which is LSB
* Wed Dec 05 2012 dimstarAATTopensuse.org- Add radvd-tmpfile-grpname.patch: On openSUSE, the radvd user is added to the \'daemon\' group (not a specific \'radvd\' group). Thus adjusting the groupname in for the file to be installed in tmpfiles.d. Otherwise, the systemd-tmpfiles service fails to start (and radvd can\'t find the /var/run folder).
* Thu Jun 14 2012 crrodriguezAATTopensuse.org- Remove URL from source as this is a git snapshot
* Thu Jun 14 2012 crrodriguezAATTopensuse.org- Update to version 1.9rc1.xxx
* Support systemd tmpfiles.d
* add Native systemd units for this service
* Uses libdaemon to deamonize and store PID file.
* Use setsockopt NETLINK_NO_ENOBUFS
* fixes debian bug 634485
* Fri Dec 02 2011 cooloAATTsuse.com- add automake as buildrequire to avoid implicit dependency
* Wed Nov 16 2011 dimstarAATTopensuse.org- Update to version 1.8.3: + proper tracking of buffer usage in send_ra- Drop diff_release_1_8_2..44ee01c7.patch: fixed upstream.
* Wed Oct 19 2011 jbohacAATTsuse.cz- Update to version 1.8.3-rc1- additional patches up to commit 44ee01c7 to fully fix the path traversal CVE-2011-3602 (bnc#721968)
* Thu Sep 29 2011 crrodriguezAATTopensuse.org- Update to version 1.8.1 for details see NEWS- Fix package building in factory, creating /var/run/radvd before being marked as %ghost- Run spec cleaner
* Tue May 03 2011 lnusselAATTsuse.de- new version 1.7: - Fix an unintentional change in 1.3: RAs were accidentally often unicast to solicitors instead of being multicast. This is still compliant with the specification but is not optimal. - Allow radvd.conf prefix, clients, route, and RDNSS options to be in any order. - exit if the number of prefixes/routes/etc. would grow too much. - Fix radvd skipping multiple interfaces when UnicastOnly is on or AdvSendAdvert is off. This got broken in radvd 1.3. - Fix a segmentation fault on reload_config() timer list corruption that only occurs with multiple interfaces. - Add \'-c\' flag to test configuration. - Deprecate old, pre-RFC5006 parameters. Support RFC6106 by adding DNS Search List support.- run as user radvd by default (bnc#691456)- clean up init script- install a small default config that advertises ULAs. Default prefix is autogenerated to get a different for on each installation.- start even if forwarding is not on to be able to work with ULAs only
* Wed Jul 29 2009 jbohacAATTsuse.cz- Update to version 1.3: - mainly compilation fixes - decreased the default valid and preferred lifetimes - support for arbitrary interface names
* Wed Aug 20 2008 jbohacAATTsuse.cz- Update to version 1.1: - Implement privilege separation on Linux: a master root process (which is able to reconfigure interfaces) and the main process. There is \'-s\' toggle to keep old behaviour. - Fix Linux retrans_timer on old kernels (newer ones have retrans_timer_ms) - Fix stderr+syslog (default) logging on non-i386 platforms. - Require that interface must be RUNNING instead of just UP. Note: this could break deployments with very old kernels. - Implement automatic interface address advertising with special prefix ::/64. - Relax interface naming (e.g. with VLANs) requirements. - Fix ordering of route, prefix and RDNSS options (only matters with RDNSS)
* Tue Nov 27 2007 jbohacAATTsuse.cz- Update to version 1.0: - Fix AdvDefaultLifetime initalization, broken in 0.9.1. - Fix STDERR+syslog logging, don\'t try STDERR after forking. - Implement RDNSS draft with (non-allocated) ND type code 25. - Redefined IgnoreIfMissing: failed interfaces are now reinitialized by default. IgnoreIfMissing only omits warnings about these. - Unblock SIGALRM at startup. - Implement MAX_INITIAL_RTR_ADVERT_INTERVAL handling (upstream fix for #149014) - Perform some dynamic/static code audit, fix some minor bugs and do cleanup as a result.
* Thu Mar 29 2007 rguentherAATTsuse.de- Add bison and flex BuildRequires.
* Thu Jul 20 2006 schwabAATTsuse.de- Call autoreconf to work around broken time stamps.
* Wed Feb 08 2006 okirAATTsuse.de- Make radvd limit the initial RA intervals according to RFC 2461. Needed for IPv6 Ready Logo (#149014)
* Wed Jan 25 2006 mlsAATTsuse.de- converted neededforbuild to BuildRequires
* Mon Dec 12 2005 okirAATTsuse.de- Update to latest upstream version 0.9
* Tue Feb 22 2005 kukukAATTsuse.de- Update to 0.7.3 (merge of all fixes)
* Wed Feb 04 2004 kukukAATTsuse.de- Add some patches from RedHat package
* Sun Jan 11 2004 adrianAATTsuse.de- add %defattr
* Fri Aug 15 2003 kukukAATTsuse.de- Add ServiceRestart tag to sysconfig file [Bug #28927]
* Fri Jan 17 2003 kukukAATTsuse.de- Update to version 0.7.2 (VLAN support)
* Thu Jan 16 2003 kukukAATTsuse.de- Add metadata to sysconfig template [Bug #22678]
* Thu Aug 01 2002 kukukAATTsuse.de- Add PreRequires for insserv and fillup
* Mon Mar 04 2002 kukukAATTsuse.de- Rename OPTIONS variable to RADVD_OPTIONS
* Thu Jan 24 2002 kukukAATTsuse.de- Update to version 0.7.1 (minor fixes)
* Sat Jan 12 2002 kukukAATTsuse.de- Add options to radvd
* Sat Jan 12 2002 kukukAATTsuse.de- Add radvd sysconfig option file- Don\'t source rc.config in init script
* Fri Nov 23 2001 kukukAATTsuse.de- update to 0.7.0- Remove START variable- Cleanup init script
* Wed Jun 06 2001 bjackeAATTsuse.de- update to 0.6.2pl3
* Mon Apr 23 2001 kukukAATTsuse.de- Fix type in START variable
* Mon Apr 09 2001 bjackeAATTsuse.de- init script rework
* Mon Feb 05 2001 bjackeAATTsuse.de- updated to 0.6.2
* Wed Jan 10 2001 bjackeAATTsuse.de- removed service from runlevel 2
* Mon Nov 27 2000 bjackeAATTsuse.de- moved init script to /etc/init.d
* Thu Nov 23 2000 bjackeAATTsuse.de- use insserv for init.d script
* Mon Nov 13 2000 bjackeAATTsuse.de- some specfile fixes
* Sat Oct 28 2000 bjackeAATTsuse.de- initial build