|
|
 |
|
|
Changelog for mkinitrd-devel-5.1.19.6-80.0.4.el5_9.x86_64.rpm :
* Wed Sep 25 2013 Jerry Snitselaar 5.1.19-6.80.0.4.el5_9- Add sd_mod to PREMODS to handle odd case with HP V1. [orabug 17489799]
* Wed Aug 28 2013 Tianyue Lan 5.1.19.6-80.0.3.el5_9- Also include necessary graphics modules in initrd. (Guangyu Sun) [orabug 16536056]
* Wed May 29 2013 Tianyue Lan 5.1.19.6-80.0.2.el5_9- Rebuild
* Tue May 28 2013 Natalya Naumova 5.1.19.6-80.0.1.el5_9- Add fips support for kernel-uek-2.6.39-
* (John Haxby) [orabug 16709263]- Add /lib64/libgcc_s.so.1 to initrd for device-mapper-multipath. (Guangyu Sun) [orabug 15829409]- fix initrd creation for root on btrfs file systems (Maxim Uvarov) [orabug 13823284]- Fix scsi initialization order. mkinitrd_stab_before_usb.patch (Maxim Uvarov) [orabug 14030199]- Fix modinfo warning when module not existing in th kernel. (Joe Jin)- Fix no kerver version made modinfo show warning [orabug 13784172] (Joe Jin)- Fix findmodule rds recursive when installed ofa [orabug 13699238] (Joe Jin)- fix regression in firmware pickup [orabug 13637902] (Guru Anbalagane)- include Xen drivers if PCI ID 0x58530001 exists (the unplug driver) [orabug 13624626] (Konrad Rzeszutek Wilk)- replace deprecated oom_adj interface with oom_score_adj [orabug 13528775] (Chuck Anderson)- Fix mkinitrd for 2.6.39 under old 2.6.18 [orabug 13522440] (Maxim Uvarov)- Load firmware from /lib/formware/(uname -r) directory also (Maxim Uvarov)[13459000]- Scan for device mapper devices along with md devices in nash [bug 12992623]- Be tolerant of missing modules that are actually built-in [orabug 12814599]- add --with-multipath option to force load mpath in the case of LVM-on-mpath [orabug 11781507] (John Sobecki)- revert early patch that did auto-mpath detection. Reason: If the /etc/multipath.conf was not properly configured, it could result in local sda disks getting allocated by multipath (sda1 is busy error during boot)- fix setquiet warning due to verbose logic addition [orabug 12753043]- support for firmware files under subdir in lib/firmware [orabug 12724067]- More updates to support both 32 and 64 bit installs- Copy over the /etc/multipath/bindings file to the initrd image to try and preserve the old mpath0 device names [orabug 10282894] (John Sobecki)- Update mkinitrd to handle 32 and 64 bit shared libs for multipath [orabug 12697173] (John Sobecki)- Check for mpath in the case of LVM-on-mpath [orabug 11781507] (John Sobecki)- Add shared libs needed for multipath executable [orabug 10202864] (John Sobecki)- Change module detection logic to work with 5.x and UEK kernels (John Sobecki)- When using the -v option, take out the setquiet in the initrd image (John Sobecki)- Detect /etc/enterprise-release- Don\'t try to reload same driver [orabug 10209399] (Joe Jin)- Merges for UEK
* Fix blkid scanning to prefer MD devices when we find them. If /dev/sda and /dev/sdb are in a MD raidset, /dev/mdX, /dev/sda and /dev/sdb will all have the same filesystem label and uuid. Nash has code that goes through all the blkid tags in sysfs order, and it will pick whichever one pops up first. This changes nash to always prefer md devices. It also forces a wait for scsi devices to settle, if scsi isn\'t compiled as a\\ module it won\'t autodetect that we should wait for scsi devices. (Chris Mason)
* Add udev and firmware_helper to initrd so firmware gets loaded during boot (Guru Anbalagane)
* Thu May 16 2013 Brian C. Lane 5.1.19.6-80- Rebuild with e2fsprogs-1.39-36.el5 Resolves: rhbz#963559
* Thu Sep 20 2012 Brian C. Lane 5.1.19.6-79- load Hyper-V modules first (bcl) Resolves: rhbz#852686
* Tue Jun 19 2012 Brian C. Lane 5.1.19.6-78- Use multipath -B to prevent it from writing to bindings file in the initrd (bcl) Resolves: rhbz#782615
* Tue Jun 05 2012 Brian C. Lane 5.1.19.6-77- Check vmlinuz after RAID activation in FIPS mode (bcl) Resolves: rhbz#737081
* Tue Apr 17 2012 Brian C. Lane 5.1.19.6-76- Handle multipath root with LABEL Resolves: rhbz#556785
* Wed Oct 26 2011 Brian C. Lane - 5.1.19.6-75- Replace patch for (#593096) with one that works (bcl) Resolves: rhbz#593096
* Tue Oct 18 2011 Brian C. Lane - 5.1.19.6-74- Add mpath to the paths searched for DM devices (jruemker) Resolves: rhbz#744330
* Tue Sep 13 2011 Brian C. Lane - 5.1.19.6-73- Fixed typo in previous commit message and correct patch name for bug 700592
* Tue Sep 13 2011 Brian C. Lane - 5.1.19.6-72- Add multipath to the list of FIPS limitations. (#700102) (bcl) Resolves: rhbz#700102- rootdev should be a dev node (#532207) (bcl) Resolves: rhbz#532207- exit() from nash-hotplug when the parent pid dies (#700592) (oblin) Resolves: rhbz#700592- Add test for updating an existing arg on ALL kernels (#696971) (bcl) Resolves: rhbz#696971- Allow args changes to affect all kernel entries (#696971) (bcl) Resolves: rhbz#696971- Fix segfault on other sections (#679581) (bcl) Resolves: rhbz#679581- Support dirsync option in nash\'s mount command (#602409) (cdahlin) Resolves: rhbz#602409- Clear lvm command_names and prefix (#593096) (bcl) Resolves: rhbz#593096- Add channel bonding support when root is on iscsi (#529158) (bcl) Resolves: rhbz#529158- Only add a module once (#512892) (bcl) Resolves: rhbz#512892- s390 now requires dmraid (#620699) (bcl) Resolves: rhbz#620699- libdhcp-1.20-12 or later now required (#660731) (bcl) Resolves: rhbz#660731
* Fri May 06 2011 Brian C. Lane - 5.1.19.6-71- Use vecho in modprobe.d patch Resolves: rhbz#564392
* Fri Apr 29 2011 Brian C. Lane - 5.1.19.6-70- Add cryptomgr when using dm-crypt Resolves: rhbz#694534
* Tue Apr 05 2011 Brian C. Lane - 5.1.19.6-69- Add module options from /etc/modprobe.d/
*.conf Resolves: rhbz#564392
* Fri Dec 24 2010 Martin Sivak - 5.1.19.6-68- No iSCSI on s390 Related: rhbz#664389
* Tue Dec 21 2010 Martin Sivak - 5.1.19.6-67- Add /sbin/iscsiadm to dependencies Resolves: rhbz#664389
* Fri Nov 19 2010 Peter Jones - 5.1.19.6-66- Attempt to pull in virtio_pci whenever any virtio module is used. Related: rhbz#568325
* Tue Sep 28 2010 Peter Jones - 5.1.19.6-65- Fix a spec file and patch error Related: rhbz#499781
* Sat Sep 25 2010 Peter Jones - 5.1.19.6-64- Set up each network interface only once. Resolves: rhbz#499781- Don\'t fail on s390
* when dmraid.static isn\'t there but withdmraid is true Resolves: rhbz#513961
* Tue May 25 2010 Brian C. Lane - 5.1.19.6-63.1- Use location of bindings file from multipath.conf Resolves: rhbz#593050
* Fri Apr 16 2010 Peter Jones - 5.1.19.6-62.1- Update patch for 540641 to correctly use nash\'s builtin readlink Resolves: rhbz#578236
* Tue Mar 09 2010 Peter Jones - 5.1.19.6-61- Use \"sg\" not \"scsi_wait_scan\" on RHEL-5 Resolves: rhbz#460899 (#c56)
* Thu Feb 25 2010 Peter Jones - 5.1.19.6-60- Follow symlinks when resolving kernel modules. (jleddy) Resolves: rhbz#540641
* Wed Feb 24 2010 Peter Jones - 5.1.19.6-59- Fix error in find_scsi_dh_modules() found during testing. Resolves: rhbz#460899
* Fri Feb 05 2010 Ales Kozumplik - 5.1.19.6-58- Do not attempt to read from an nonexistent DmNameCache. Resolves: rhbz#516047
* Fri Jan 29 2010 Ales Kozumplik - 5.1.19.6-57- replace nashDmGetDevName() with a cache Resolves: rhbz#516047
* Wed Dec 23 2009 Peter Jones - 5.1.19.6-56- Activate all configured multipath devices during bootup Resolves: rhbz#438887
* Tue Dec 22 2009 Peter Jones - Load all scsi_dh_
* modules if we\'re setting up multipath. Resolves: rhbz#460899
* Tue Dec 22 2009 Peter Jones - Handle options with spaces in /etc/modprobe.conf Resolves: rhbz#467850- Handle root vg spanning multiple multipaths Resolves: rhbz#501535- Use lvm --dumpconfig to retrieve the lvm configuration Resolves: rhbz#517868
* Wed Nov 25 2009 Hans de Goede - 5.1.19.6-55- Stop local loop variable clobbering global rootdev Resolves: rhbz#503567- Don\'t try to activate RAID sub sets Resolves: rhbz#526246
* Thu Jun 18 2009 Hans de Goede - 5.1.19.6-54- Handle cciss controllers correctly in fips mode Resolves: rhbz#505108- IA64 has /boot/efi instead of /boot, handle this correctly in fips mode Resolves: rhbz#505111- Don\'t require prelink in fips mode Resolves: rhbz#505113
* Wed May 27 2009 Peter Jones - 5.1.19.6-53- Handle missing /proc/sys/crypto/fips_enabled correctly. Resolves: rhbz#502624
* Thu May 21 2009 Peter Jones - 5.1.19.6-52- Revert fix for 227711, it causes 501775 . Related: #227711
* Wed May 20 2009 Peter Jones - 5.1.19.6-51- Rebuild just to get the tags all right. Related: rhbz#467497
* Thu May 14 2009 Hans de Goede - 5.1.19.6-50- Make --with-fips work without -v Resolves: rhbz#467497 rhbz#499639
* Tue May 12 2009 Hans de Goede - 5.1.19.6-49- When in fips mode load tcrypt module to self test all crypto algorithms Resolves: rhbz#499639- Add --rm_partitions to dmraid invocation to stop IO-errors when booting from striped dmraid. Resolves: rhbz#475384
* Wed May 06 2009 Peter Jones - 5.1.19.6-48- Fix swsuspdev label/uuid handling Resolves: rhbz#489836- Fix symlink generation in installkernel on ia64 Resolves: rhbz#227711- Make netname command handle environmental variables correctly. Resolves: rhbz#474422
* Wed May 06 2009 Hans de Goede - 5.1.19.6-47- Force loading of all crypto modules in fips mode, so that they all get integrity checked before any of them are used. Resolves: rhbz#467497
* Mon Apr 20 2009 Hans de Goede - 5.1.19.6-46- Add integrity checking of the kernel image to the generated initrd when in fips mode. Resolves: rhbz#467497
* Sat Apr 18 2009 Peter Jones - 5.1.19.6-45- Supress failures if dm-raid45 modules are not present. Resolves: rhbz#479270
* Thu Dec 18 2008 Peter Jones - 5.1.19.6-44- Include dm-raid45 and related modules if dmraid is in use. Resolves: rhbz#476866
* Tue Dec 16 2008 Peter Jones - 5.1.19.6-43- Fix option passing in mountCommand Resolves: rhbz#476537
* Thu Dec 11 2008 Peter Jones - 5.1.19.6-42- Remove error message from failed stabilization on /proc/scsi/scsi Resolves: rhbz#464636
* Wed Nov 26 2008 Peter Jones - 5.1.19.6-41- Don\'t treat the first iteration of stabilized as a change Resolves: rhbz#464636- Revert \"fix\" in -40, as it breaks dmraid and multipath.
* Thu Nov 06 2008 Peter Jones - 5.1.19.6-40- Handle modprobe options with spaces in them better Resolves: rhbz#467850
* Thu Oct 30 2008 Peter Jones - 5.1.19.6-39- Revert the fix to rhbz#276911, as it causes more bugs. Resolves: rhbz#466848- Improve handling of encrypted cciss devices. (dlehman) Resolves: rhbz#467839
* Sat Oct 18 2008 David Cantrell - 5.1.19.6-38- BR libdhcp-devel >= 1.20-6 Resolves: rhbz#467499
* Tue Oct 07 2008 Peter Jones - 5.1.19.6-37- Allow for disk arrays where the disks take > 1/4 second to respond Resolves: rhbz#461850
* Sat Oct 04 2008 David Cantrell - 5.1.19.6-36- Support xDR multipath devices on s390x Resolves: rhbz#184770
* Tue Sep 23 2008 Peter Jones - 5.1.19.6-35- Remove extra dep on nash subpackage. Related: rhbz#463216
* Tue Sep 23 2008 Peter Jones - 5.1.19.6-34- Fix typo in requires in spec file. Resolves: rhbz#463216
* Sat Sep 20 2008 David Cantrell - 5.1.19.6-33- Allow findstoragedriverinsys() to handle nodes in /sys without a slaves tree Resolves: rhbz#461536
* Fri Sep 19 2008 Peter Jones - 5.1.19.6-32- Fix some minor stuff rpmdiff found. A total lie here: Related: rhbz#426992
* Fri Sep 19 2008 Peter Jones - 5.1.19.6-31- Don\'t limit zipl kernel label length to 15 any more. Resolves: rhbz#426992- Handle sysfs slave device directories slightly better. Related: rhbz#447841- Don\'t put all network interface\'s dhcp leases in the same file. Related: rhbz#447375
* Fri Aug 08 2008 Peter Jones - 5.1.19.6-30- Actually make this -30 Related: rhbz#451670 Related: rhbz#452927
* Wed Jul 23 2008 Dave Lehman - 5.1.19.6-29- Add support for encrypted block devices using LUKS/dm-crypt Resolves: rhbz#451670
* Wed Jul 16 2008 Peter Jones - Add kvm virtio pci device support. Resolves: rhbz#446227
* Wed Jul 16 2008 Peter Jones - Fix nfs mount option handling. Resolves: rhbz#444973
* Wed Jul 16 2008 Peter Jones - Fix typo in patch for bz241763 Resolves: rhbz#241763- All ppc uses vmlinux instead of vmlinuz in new-kernel-package Resolves: rhbz#276911- Add support for DKMS hooks Resolves: rhbz#440584
* Sat Mar 29 2008 Peter Jones - 5.1.19.6-28- Fix bad regexp in devicemapper dependency resolution code Resolves: rhbz#439371- Re-do workaround for gfs2/lock_nolock dep brokenness Resolves: rhbz#438743
* Thu Mar 27 2008 Peter Jones - 5.1.19.6-27- Fix initialization of \"withusb\" on s390/s390x Resolves: rhbz#432776- Fix application of patch 15 Resolves: rhbz#428723- Fix netdev naming with drivers specified on the command line Resolves: rhbz#436509
* Thu Mar 20 2008 Peter Jones - 5.1.19.6-26- Fix missing patch from -22 . Resolves: rhbz#368821
* Tue Mar 04 2008 Peter Jones - 5.1.19.6-25- Fix syntax error in previous build. Resolves: rhbz#435717
* Tue Mar 04 2008 Peter Jones - 5.1.19.6-24- Add support for _rnetdev in root filesystem options. Resolves: rhbz#435717
* Fri Feb 29 2008 Peter Jones - 5.1.19.6-23- Fix segfault in nash\'s \"netname\" command which effects iscsi root. Resolves: rhbz#435165
* Sat Feb 02 2008 Peter Jones - 5.1.19.6-22- Ignore floppy devices during filesystem label/uuid probing. Resolves: rhbz#368821
* Fri Feb 01 2008 Peter Jones - 5.1.19.6-21- Fix firmware loader completion logic Resolves: rhbz#235277- Support spaces in the kernel command line Resolves: rhbz#240779- Clarify module option documentation Resolves: rhbz#241763
* Fri Feb 01 2008 Peter Jones - 5.1.19.6-20- Add iSCSI Boot Firmware Table support Resolves: rhbz#307771- Handle empty dm rules better Resolves: rhbz#244202- Load usb modules in correct order Resolves: rhbz#234847- Fix multipath on iscsi Resolves: rhbz#428723
* Wed Sep 12 2007 David Cantrell - 5.1.19.6-19- More conflicting header fixes Related: rhbz#277481
* Thu Sep 06 2007 David Cantrell - 5.1.19.6-18- Fix conflicting headers Resolves: rhbz#277481
* Wed Aug 15 2007 David Cantrell - 5.1.19.6-17- Set withusb=0 on s390x and s390 architectures Resolves: rhbz#251136
* Thu Jul 19 2007 David Cantrell - 5.1.19.6-16- Invoke kpartx the same was as rc.sysinit to maintain naming consistency Related: rhbz#185852- Remove unused code Related: rhbz#185852
* Thu Jul 12 2007 Peter Jones - 5.1.19.6-15- Add more ways to do detection for the EMC hardware handler module. Related: #185852
* Thu Jul 12 2007 Peter Jones - 5.1.19.6-14- Add support for disabling dmraid from a config file so we don\'t regress Related: #185852- Clean up new mpath code. Related: #185852
* Tue Jul 10 2007 Peter Jones - 5.1.19.6-13- Fix \"--without-usb\" Resolves: #230852- Make /lib/firmware before trying to put things there Related: #218452
* Tue Jul 10 2007 Peter Jones - 5.1.19.6-12- Don\'t try to guess a module path if modprobe can find it Resolves: #218452- Load sd_mod explicitly during iscsi boot. Resolves: #222685
* Sat Jul 07 2007 David Cantrell - 5.1.19.6-11- Remove unnecessary text Resolves: rhbz#238019- Handle EMC storage arrays when gathering WWIDs for multipath devices Related: rhbz#185852
* Fri Jul 06 2007 David Cantrell - 5.1.19.6-10- Pass the \'-p p\' argument to kpartx Related: rhbz#185852
* Fri Jul 06 2007 David Cantrell - 5.1.19.6-9- Quote tr arguments to avoid errors from certain input Related: rhbz#185852- In the inst() function, make the destination directory if it doesn\'t exist Related: rhbz#185852
* Wed Jun 27 2007 David Cantrell - 5.1.19.6-8- Properly install files and symlinks in installkernel (prarit) Resolves: rhbz#227711
* Thu Jun 21 2007 David Cantrell - 5.1.19.6-7- Ignore Xen block devices when collecting WWID values Related: rhbz#185852
* Wed Jun 20 2007 David Cantrell - 5.1.19.6-6- Require device-mapper-multipath and kpartx packages Related: rhbz#185852
* Wed Jun 20 2007 David Cantrell - 5.1.19.6-5- Bring network devices up before iscsistart runs Related: rhbz#185852
* Tue Jun 19 2007 David Cantrell - 5.1.19.6-4- Make sure to copy in /var/lib/multipath/bindings to the initrd- Bring up multipath devices by WWID on initrd boot- Resolves: rhbz#185852- Resolves: rhbz#216240
* Sun Jun 03 2007 Jon Masters - 5.1.19.6-3- Backport firmware fixes from Fedora 7 into RHEL5 (use modinfo to discover firmware files required). Related: rhbz#184773
* Thu May 31 2007 Jon Masters - 5.1.19.6-2- Add support for modinfo to locate modules.- Add elilo fixes for IA64 to new-kernel-pkg. Resolves: #239392 Related: #224076
* Fri Jan 19 2007 Peter Jones - 5.1.19.6-1- Don\'t create /dev/ttyN on s390
* Resolves: #209204
* Tue Jan 16 2007 Peter Jones - 5.1.19.5-1- Use a different method of getting iscsi info Resolves: #221088
* Fri Jan 12 2007 Peter Jones - 5.1.19.4-1- Fix LABEL/UUID handling in mkinitrd Resolves: #222106
* Fri Jan 05 2007 Jeremy Katz - 5.1.19.3-1- don\'t create /dev/tty
* on s390 (#209204)- handle multi-line options (#209447)- ensure that scsi devices have stabilized to ensure the rootdev is available (#213039)- iscsi tools changed their syntax somewhat (#221088)
* Sat Dec 16 2006 Peter Jones - 5.1.19.2-1- Honor installing with \'nompath\' (#219483)
* Thu Dec 07 2006 Peter Jones - 5.1.19.1-2- Rebuild for new libparted (#218624)
* Tue Oct 31 2006 Peter Jones - 5.1.19.1-1- Merge missing FC6 fixes back into this branch to eliminate regressions.
* Fri Sep 29 2006 Peter Jones - 5.1.19-1- Fix booting on non-LVM devices where sysfs uses a \'!\' in the device path, such as cciss. (#201875, #196360)
* Thu Sep 28 2006 Peter Jones - 5.1.18-1- Split nash into its own package to work around dep sorting issue on install.
* Fri Sep 22 2006 Peter Jones - 5.1.17-1- Fix module dependency probing when there\'s no modalias
* Thu Sep 21 2006 Peter Jones - 5.1.16-1- Don\'t require non-tmpfs tmpdir unless we\'re using loopback- Fix symlink chasing for yaboot.conf in grubby (#207302)
* Thu Sep 21 2006 Jeremy Katz - Hack for moduledeps of gfs2/nfs
* Wed Sep 20 2006 Jeremy Katz - Handle zfcp.conf not specifying scsiid and scsilun (#198803)
* Wed Sep 13 2006 Peter Jones - Fix escaping error in md-handler\'s awk script
* Sat Sep 09 2006 Jesse Keating - 5.1.15-1- more typos to fix related to (#205194)
* Sat Sep 09 2006 Peter Jones - 5.1.14-1- Fix another typo in the same one-line shell wrapper (#205194)
* Sat Sep 09 2006 Peter Jones - 5.1.13-1- Fix missing coreutils dep and typo in shell wrapper (#205194)- Fix bad mpath test (#204758)
* Fri Sep 08 2006 Peter Jones - 5.1.12-1- Fix bug in dm dependency scanning (#205635)
* Thu Sep 07 2006 Peter Jones - 5.1.11-1- Pull in bdevid properly (not two sources any more)- Lots of minor bugfixes, leak fixups, etc.- Updates for new iScsi userland (katzj)- ata and usb device id probes in bdevid- preliminary work for boot-time device identification.- Fixes for network driver selection (katzj)
* Sat Sep 02 2006 Peter Jones - 5.1.10-1- Fix %setup args- Work around lvm locking problems when clvm is installed (#203904)- Work around lvm segfault by always using lvm.static- Fix label scanning on dm devices (based on a patch from Hans de Goede) (#204763)- handle the /proc/bus/usb mounting with a state machine in the module loading emission, not with a sentinal value- do forced finding of devices
*after
* auto-detection of the root fs, so we\'re not blindsided by bogus scsi_hostadapter aliases and the like.- move nashDm
* functions to libnash so stuff in block.c can call them.
* Wed Aug 30 2006 David Cantrell - 5.1.9-2- BuildRequires parted-devel >= 1.7.1-15
* Fri Aug 18 2006 Peter Jones - 5.1.9-1- Fix \"MOUNT_PROC_USB\" warning
* Thu Aug 17 2006 Peter Jones - 5.1.8-1- Use modprobe to find module deps (#202559, #202596)- Fix typo for /dev/efirtc (#202110)
* Thu Aug 17 2006 Peter Jones - 5.1.7-1- Make \"stabilized\" work better (patch from Alexandre Oliva)- Rewrite usb handling (notting and pjones)- Fix libbdevid provides/obsoletes.- Include usb hcd drivers by default
* Tue Aug 15 2006 Bill Nottingham - 5.1.6-1- don\'t make every root device /dev/loop0. Eep.
* Tue Aug 15 2006 Peter Jones - 5.1.5-1- Provide libbdevid.
* Tue Aug 15 2006 Peter Jones - 5.1.4-1- Fix requires for libbdevid- Make it safe to call nashLogger and nashLoggerV with no context.
* Tue Aug 15 2006 Mark McLoughlin - 5.1.3-2- Fix compile error
* Sat Aug 12 2006 Bill Nottingham - 5.1.3-1- replace various sed/grep/cut/head calls with bash & awk equivalents- fix a typo- nfs loop fixes- silence xen errors when sysfs layout is different
* Thu Jul 27 2006 Peter Jones - 5.1.2-1- pull in new libbdevid for scsi probing fix- restructure package so things can include libbdevid (and its modules) without depending on python
* Thu Jul 20 2006 Bill Nottingham - support for loopback root (including loop-over-NFS)
* Wed Jul 19 2006 Jeremy Katz - 5.1.1-1- build with -fPIC- pull in new libbdevid for linking fix
* Tue Jul 18 2006 Jeremy Katz - 5.1.0-1- allow rootdev/rootfs/rootopts parsing on the mkinitrd command line (notting)- fix case where we\'d spin forever resolving a device (#199046)
* Fri Jul 14 2006 Peter Jones - 5.0.47-1- add libbdevid- fix mode handling on open syscall wrapper (patch from Mark McLoughlin)- save dhcp lease file after network initialization (patch from markmc)
* Fri Jul 07 2006 Bill Nottingham - if NFS host doesn\'t resolve, assume it\'s an IP- make sure IP check doesn\'t get extraneous info
* Thu Jul 06 2006 Peter Jones - make libnash.a and the nash-devel package- use libdhcp instead of pump (patch from Mark McLoughlin)
* Sat Jul 01 2006 Jeremy Katz - 5.0.46-1- if we don\'t get a modalias for a net driver, try via ethtool (notting, #196104)- add patches from Aron Griffis (aron AT hp DOT com) for multiboot support on ia64
* Fri Jun 23 2006 Jeremy Katz - 5.0.45-1- don\'t emit for iscsi username/password stuff- handle _netdev option for filesystems
* Fri Jun 23 2006 Jeremy Katz - 5.0.44-1- fix so we only use iscsistart if we\'re doing root on iscsi - fix spurious shell error (noticed by karsten)
* Thu Jun 22 2006 Jeremy Katz - 5.0.43-1- Add back patches from pjones which had just been in the package for
* fix bad shell code to detect DMs in use
* fix \"stabilized\" to stat where appropriate
* use stabilized for sbp2
* Thu Jun 22 2006 Jeremy Katz - 5.0.42-1- add a hack to handle xennet devices not having a modalias (#196104)- initial pass at support for root on iscsi (patch from Patrick Mansfield )
* Tue Jun 13 2006 Peter Jones - Fixes for stateless/diskless configurations (patch from Jeff Law, )
* Thu May 25 2006 Peter Jones - 5.0.41-1- (very) basic multipath support- minor fixes for usb
* Fri May 19 2006 Jeremy Katz - 5.0.40-1- fix multiple netdev handling (#192321)
* Thu May 11 2006 Peter Jones - 5.0.39-1- handle [eou]hci_hcd even _more_ correctly ;)
* Wed May 10 2006 Peter Jones - 5.0.38-1- handle bringing up multiple network devices (katzj)- make \"withusb=yes\" default- add --without-usb- make usb load [euo]hci_hcd correctly
* Tue May 02 2006 Jeremy Katz - 5.0.37-1- munge rootopts on all non-nfs cases
* Thu Apr 27 2006 Bill Nottingham - 5.0.36-1- NFS root fixes- fix typo
* Tue Apr 11 2006 Peter Jones - 5.0.34-1- fix \"!\" handling for sysfs paths in mkblkdevs- fix argument checking for mknodCommand
* Fri Mar 31 2006 Peter Jones - 5.0.33-1- fix unbalanced pushd in mkinitrd (patch from Pete Zaitcev, bz# 185822)- add \"cond\" command for simple conditionals (bz# 182938)- add \"status\" command to see/set the exit status for testing- add \"--remove-args\" and \"--update\" args for new-kernel-pkg (patch from Don Zickus, bz# 183917)
* Tue Mar 14 2006 Peter Jones - 5.0.32-1- handle sd_mod on scsi_mod in findmodule, not in the scsi setup. This fixes the \"no scsi_hostadapter\" alias problem better (#182008).
* Sat Mar 11 2006 Peter Jones - 5.0.31-1- add segv handler for nash
* Thu Mar 09 2006 Peter Jones - 5.0.30-1- move blkid.tab
* references to /etc/blkid/blkid.tab
*- don\'t do the selinux context stuff on blkid.tab
*, as it now inherits from the directory.
* Tue Feb 28 2006 Peter Jones - 5.0.29-1- Fix pump-devel buildrequires- Fix grubby\'s getpathbyspec() usage (#183010)- Fix grubby\'s makefile- Make readlink command work with super scary huge sysfs paths (#183091)- Make readlink handle directories better (#166666)- Don\'t create ramdisk blockdevs, mkblkdevs does it (#181873)- Don\'t use showlabels to resolve labels, use resolveDevice so we don\'t need messy awk (#180372)
* Sat Feb 25 2006 Peter Jones - 5.0.28-1- Make /dev/efirtc on ia64 boxes (#182598)- Handle selinux contexts on /etc/blkid.tab
* since we can\'t do it in libblkid.- Make building from the \"nash\" subdir work again- Make getpathbyspec() allocate on the caller\'s stack, eliminating several memory leaks in callers.- Don\'t strip nash
* Thu Feb 23 2006 Peter Jones - 5.0.27-1- Fix multiboot argument quoting in new-kernel-package (#182243)- Fix \"netlink\" fd error in hotplug initialization.- Fix directory creation in smartmknod()- Fix find command when it\'s not run alone (#181874, patch from Mark McLoughlin)- Don\'t use 0-length uuids- Update /dev/mapper nodes more often- Allow dm partadd not to include the /dev/mapper path- Use /etc/fstab, not /fstab, so if you\'ve got /sbin/mount it\'ll work- Bring in sd_mod if libata or scsi_mod is selected (#181983)- use -Wl,--wrap,open and __wrap_open() instead of coeOpen()
* Thu Feb 16 2006 Peter Jones - 5.0.26-1- fix detection of floppy devices, don\'t probe them for labels- fix grubby to use the same label scanning code as nash- senseless rewriting of makefiles so that grubby can use nash\'s .o\'s, uh, \"more easily\".
* Wed Feb 15 2006 Peter Jones - 5.0.25-1- rework hotplug control fds (#181515)
* Wed Feb 15 2006 Peter Jones - 5.0.24-1- use the right nash-dm command to get the device list- check if a subdevice has the same partition table, not if it starts at the right place (fixes partition comparison on !mirror devices)
* Tue Feb 14 2006 Peter Jones - 5.0.23-1- add basic hotplug handler and firmware loader
* Tue Feb 14 2006 Jesse Keating - 5.0.22-1.1- rebump for build order issues during double-long bump
* Sun Feb 12 2006 Peter Jones - 5.0.22-1- formatting cleanups- prefix partition number with \"p\" for partitions on dmraid- add support for disabling partitions which overlap with partitions on dm devices.- add multipath support- fix dm creation ordering and partition detection- add \"network\" command (katzj)- add nfsroot support (katzj)- put \"showlabels\" back into nash
* Sat Feb 04 2006 Peter Jones - 5.0.21-1- add \"mount -o bind\" support and \"mount --move\" support (#109366, patch from Kasper Dupont)- add resolveDevice command, which cases down device labels.- remove \"findlodev\" from the documentation (#178587)- fix nash command name parsing bug (#178587)- fix \"find\" argument parsing (#178587)- add \"find\" handling for \"-type d\"
* Fri Feb 03 2006 Peter Jones - 5.0.20-1- fix really dumb spec file mistake- fix devno detection for /dev/root- fix testdm check
* Fri Feb 03 2006 Peter Jones - 5.0.19-1- mkinitrd: get resolve_dm_name() and get_numeric_dev() from initscripts instead of a private copy- add block.[ch]: - move parse_sysfs_devnum(), sysfs_blkdev_probe(), and mkpathbyspec() from nash.c - add label/uuid/name lookups for block devices using libblkid- add lib.[ch]: - move makeFdCoe(), coeOpen(), coeFopen(), coeOpendir(), readFD(), nashLoggerV(), nashLogger(), qprintf(), eprintf(), smartmknod(), testing, quiet, reallyquiet from nash.c - move nashDefaultLogger(), from dm.c - move log enums and declarations from dm.h- dm.c: add dm_finish(), which does dm_task_destroy() and then library cleanup (solves an fd leak)- remove linux_fs.h, mount_by_label.[ch], name_to_dev_t.[ch]
* Wed Feb 01 2006 Peter Jones - 5.0.18-1- make mkinitrd discover dm uuids- add uuid support to nash\'s \"dm create\" and \"dm partadd\"- add nash command \"dm get_uuid $NAME\"- add support for renamed dm raids
* Wed Jan 04 2006 Peter Jones - 5.0.17-1- fix dm operations to create/remove device nodes during each change.
* Wed Jan 04 2006 Peter Jones - 5.0.16-1- Hopefully fix raid autorun with a patch from Paul Flinders.
* Tue Dec 20 2005 Peter Jones - 5.0.15-1- Don\'t open init\'s console with close-on-exec
* Mon Dec 19 2005 Peter Jones - 5.0.14-1- Remove vestigial loopback support.- Remove email addresses from man pages (which still need some work)
* Sat Dec 17 2005 Jesse Keating - 5.0.13-1.1- bump for gcc
* Tue Dec 06 2005 Peter Jones - 5.0.13-1- Updates for gcc 4.1
* Sun Nov 27 2005 Peter Jones - 5.0.12-1- Fix buildreq/req for dmraid on s390- Typo fix from Alexandre Oliva
* Tue Nov 22 2005 Peter Jones - 5.0.11-1- audit for open()s without appropriate closes()- make new functions coeOpen(), coeFopen(), and coeOpendir(). These behave like open(), fopen(), and opendir() except that they set any associated file descriptors to close on exec().- use them everywhere except where we open a console.
* Fri Nov 18 2005 Peter Jones - 5.0.10-1- don\'t set up dmraids that aren\'t active in the initrd
* Thu Nov 17 2005 Peter Jones - 5.0.9-1- dmraid support
* Sat Oct 22 2005 Peter Jones - 5.0.8-1- don\'t clobber cmdline in mkrootdev (fixes runlevel selection)
* Sat Oct 22 2005 Jeremy Katz - 5.0.7-1- fix new-kernel-pkg --multiboot=
* Wed Oct 19 2005 - 5.0.6-1- make lvm work again
* Tue Oct 18 2005 Peter Jones - 5.0.5-1- make PROBE, MODULES, and PREMODS load defaults from a config file- get rid of support for not using a dynamic /dev- add options to force device probes (for when PROBE is \"no\")- consolidate some duplicate code paths- make nash\'s otherCommand check PATH first and use what it finds there for any commands it needs to run, unless the command starts with \"nash-\", in which case the internal version is used unconditionally- remove the symlink hack for setuproot/preswitchroot/switchroot- wrap all the nash commands in mkinitrd with shell functions and use the \"nash-\" varient.- rework root fs creation so Jeremy can use the otherCommand feature
* Sat Oct 08 2005 Peter Jones - 5.0.4-1- split switchroot into setuproot and switchroot, with presetuproot in between- make preswitchroot and setuproot execute through symlinks, so they may be replaced by a second initramfs image- add logic to mount filesystems specified in /etc/fstab.sys during setuproot- general code cleanups
* Sat Oct 01 2005 Peter Jones - 5.0.3-1- fix root dev discovery to give us \"hda3\" and such again, rather than a full sysfs path
* Fri Sep 30 2005 Peter Jones - 5.0.2-1- add error and quiet printf functions- use them instead of testing quiet and typing stderr everywhere- actually make _all_ errors use eprintf (and thus stderr)- print strerror in errors instead of raw errno- make \"getKernelCmdLine use readFD- make \"getKernelArg\" picky about if you\'ve got the right command vs just one that starts with the same string- make \"getKernelArg\" handle \"=\" for you, so it either gives you the value when there is one, \'\\0\' when there\'s not and it\'s EOL, or whitespace.- reformat some two-space-indent spots- check for short reads in catCommand- kill pivotroot- cleaned up resume messages- make mkrootdev use readFD- combine mkdevies and makedevs into mkblkdevs, no longer using /proc/partitions- don\'t use callocs+memcpy/strcpy+strcat when we can use asprintf- make setQuietCommand use getKenrelArg- make runStartup use readFD- patch from Alexandre Oliva to fix LVM-on-RAID1 /root and swap-on-LVM (bz #169059)- reorder device creation for easier maintenance create /dev/rtc- change fixme comment about lvm vgs- use cemit at some places we used a lot of emits before- reorder device node creation for clarity- use mkblkdevs instead of makedevs and mkdevices- decouple loopback root and lvm
* Thu Sep 29 2005 Peter Jones - 5.0.1-1- create /dev/rtc- create /dev/tty, /dev/tty{0..11}, and /dev/ttyS{0..4}- tweak the messages output in loud mode during device node creation
* Wed Sep 28 2005 Peter Jones - 5.0.0-1- remove support for pivotroot- remove support for non-initramfs initrds- remove support for 2.4 kernels- don\'t force scsi_mod before scsi modules; deps should bring it in. same for \"unknown\"; it\'s not needed any more.- lots of whitespace adjustment- minor messaging changes- no manual redirection to stderr or RCFILE, nor manual verbose checking- in light of these changes and other planned changes, this is 5.0.0
* Tue Sep 27 2005 Peter Jones - 4.2.24-1- Fix module discovery for raid (eleminates \"find\" warning as well)
* Mon Sep 26 2005 Peter Jones - 4.2.23-2- Fix module discovery to not always use the modules /dev/hda1 requires when using root-on-label.- Put the lvm check after the raid check, so the raid check atually gets run.
* Thu Sep 22 2005 Peter Jones - 4.2.22-1- Only scan appended kernel command line args for duplicates once.- handle short reads correctly in nash\'s readFD- use calloc for things instead of malloc, since we usually need zeroed memory and we never memset- use canonicalize_file_name instead of malloc+realpath- honor quiet flag on suspend/resume- autodetect storage drivers in mkinitrd
* Tue Aug 16 2005 Peter Jones - 4.2.21-1- Fix a bug in switchroot\'s command line parsing (patch from mkj)
* Sat Aug 13 2005 Jeremy Katz - 4.2.20-1- fix a buglet in root vg finding- support resume with swsusp
* Sat Aug 06 2005 Peter Jones - 4.2.19-1- Fix yaboot stanza placement with a patch from dwmw2 (#142346)
* Thu Jul 21 2005 Bill Nottingham - 4.2.18-1- since udev is not in use, don\'t require it or claim to be starting it
* Sat Jun 25 2005 Peter Jones - 4.2.17-1- Don\'t use udev or udevstart in the initrd; it\'s trivial to do all that work by looking for directories with \"dev\" nodes in sysfs and making the device from the dirname using major/minor from \"dev\"
* Tue Jun 07 2005 Peter Jones - 4.2.16-1- Add a patch from Jeff Layton to remove files from the initramfs before executing the new init. (slightly modified, #153069)
* Wed May 18 2005 Peter Jones - 4.2.15-1- Better init argument handling (don\'t mess up with serial console)
* Wed May 11 2005 Peter Jones - 4.2.14-1- Better init argument handling (no uninitialized args)
* Sat May 07 2005 Peter Jones - 4.2.13-1- allow for lvm VGs to be in the /dev/mapper/$VG-$LV format (#154767)
* Thu May 05 2005 Peter Jones - 4.2.12-1- Don\'t copy \"console=\" arguments from /proc/cmdline to init
* Thu May 05 2005 Peter Jones - 4.2.11-1- don\'t copy \"rw\" option into the initrd; use \"ro\" instead if it\'s the only option.- Don\'t print \"unmounting old ...\" messages in nash if we\'re set to quiet
* Wed May 04 2005 Peter Jones - 4.2.10-1- set umask explicitly
* Wed Apr 27 2005 Peter Jones - 4.2.9-1- invoke bash with \"--norc\" (#155986)- use binary udevstart.static, not a symlink- print exit status in nash when programs return an error
* Wed Apr 06 2005 Peter Jones - 4.2.8-1- Don\'t consolidate duplicates in \"--args\" (#147222)
* Thu Mar 31 2005 Peter Jones - 4.2.7-1- unmount what filesystems we can from the initramfs- close appropriate files before spawning init
* Thu Mar 24 2005 Peter Jones - 4.2.6-1- work correctly with \"set -o noclobber\"- wait longer after modprobe of usb-storage- fix a wrong error output file
* Wed Mar 23 2005 Peter Jones - 4.2.5-1- handle mount-by-uuid for root correctly (##148756)
* Fri Mar 18 2005 Peter Jones - 4.2.4-1- don\'t do vgmknodes at all for lvm
* Wed Mar 16 2005 Peter Jones - 4.2.3-1- use --ignorelockingfailure with lvm commands in the initrd, and only activate the volume / is on. (#151172)
* Wed Mar 16 2005 Peter Jones - 4.2.2-1- Fix accidental formatting of data in grub.conf (#151118, from proskiAATTgnu.org)
* Wed Mar 02 2005 Peter Jones - 4.2.1-1- typo fixes- one missed gcc4 fix
* Wed Mar 02 2005 Peter Jones - 4.2.0.4-1- fix gcc4 warnings/errors- use -D_FORTIFY_SOURCE=2 wherever we don\'t use RPM_OPT_FLAGS
* Sat Jan 22 2005 Peter Jones - 4.2.0.3-1- Make nash expand environment variables on command lines (#144474)- Make nash check pids returned from wait
*() (#145660)
* Sat Jan 22 2005 Peter Jones - 4.2.0.2-1- Make getArg return NULL on cmd=NULL, fixing #144472 . Based on a patch from Kasper Dupont.
* Wed Jan 19 2005 Jeremy Katz - 4.2.0.1-1- fix grubby tests to run on systems with /boot = /
* Wed Jan 19 2005 Jeremy Katz - 4.2.0-1- grubby: add multiboot support for xen0- new-kernel-pkg: likewise
* Tue Dec 21 2004 Jeremy Katz - 4.1.20-1- grubby: fix mac yaboot.conf updating if magicboot line is present
* Tue Nov 23 2004 Jeremy Katz - 4.1.19-1- remove use of dietlibc for nash
* Thu Nov 04 2004 Jeremy Katz - handle machines with lots of disks in /proc/partitions (#137816)
* Mon Oct 25 2004 Jeremy Katz - require cpio (#136814)
* Mon Oct 18 2004 Jeremy Katz - 4.1.18-1- fix UPDATEDEFAULT with new-kernel-pkg (#135997)
* Sat Oct 16 2004 Jeremy Katz - 4.1.17-1- run udevstart again instead of sleeping, this will ensure all devices are created in all cases after modules have been loaded (thanks to notting)
* Sat Oct 16 2004 Jeremy Katz - 4.1.16-1- mkinitrd: Sleep briefly to let udev finish creating devices
* Thu Oct 14 2004 Jeremy Katz - 4.1.15-1- new-kernel-pkg: set new kernels as default (#135161) when a) /etc/sysconfig/kernel contains UPDATEDEFAULT=yes b) --package foo is passed in and foo matches DEFAULTKERNEL in /etc/sysconfig/kernel
* Fri Oct 01 2004 Jeremy Katz - 4.1.14-1- support changing root on the kernel command line with lvm (#133236)
* Thu Sep 23 2004 Jeremy Katz - 4.1.12-1- update to work with udev 032, conflict with old udev- if udev is present, use it. trying to avoid the use of udev if it\'s installed is the road to things not working
* Sat Sep 11 2004 Jeremy Katz - 4.1.11-1- more fixing
* Thu Sep 09 2004 Jeremy Katz - 4.1.10-1- mkinitrd: mount tmpfs with the right permissions
* Wed Sep 01 2004 Jeremy Katz - 4.1.9-1- mkinitrd: use tmpfs instead of ramfs for udev stuff
* Sat Aug 28 2004 Jeremy Katz - 4.1.8-1- nash: and the hack to fix ppc broke other arches, conditionalize it (#130928)
* Thu Aug 26 2004 Jeremy Katz - 4.1.6-1- nash: fix another off by one (#130987)- nash: hack to fix ppc booting (#130928)
* Thu Aug 26 2004 Karsten Hopp - 4.1.5-1- fix zfcp handling
* Wed Aug 25 2004 Jeremy Katz - 4.1.4-1- nash: create raid device if needed (think udev) before calling the raidautorun ioctl (#130561)
* Wed Aug 25 2004 Jeremy Katz - 4.1.3-1- nash: make echo behavior consistent with other shells- more fixes from Steve Grubb (#129673)
* Tue Aug 24 2004 Karsten Hopp 4.1.2-1- mkinitrd: add support for zfcp devices (mainframe)
* Fri Aug 20 2004 Jeremy Katz - 4.1.1-1- don\'t remove lost+found (#130327)- don\'t try to mount/umount /sys on 2.4 (#130298)
* Wed Aug 18 2004 Jeremy Katz - 4.1.0-1- mkinitrd: if using udev for the initrd, set things up appropriately (based on patches from Harald Hoyer and Thomas Woerner)- nash: support for echo -n- nash: better error message on exec failures- nash: exec udev if we\'re called as a hotplug handler
* Tue Aug 17 2004 Jeremy Katz - 4.0.6-1- various fixes from a code review by Steve Grubb which should fix some of the lingering problems (#129673)- nash: warning fix from Michal Jaegermann (#129673)- grubby: removal with (hd0,0)
* Fri Aug 13 2004 Jeremy Katz - 4.0.5-1- nash: oops, let\'s try that again
* Thu Aug 12 2004 Jeremy Katz - 4.0.4-1- nash: fix mounting by label in some cases (tracked down by Erik Jacobson, #129581, #129673, #129667, #129635)
* Wed Aug 11 2004 Jeremy Katz 4.0.3-1- grubby: more (hd0,0) support (#125156)- mkinitrd.8: update manpage (#129585)- nash: fix some warnings
* Thu Aug 05 2004 Jeremy Katz 4.0.2-1- nash: support bind mounting- grubby: support the (hd0,0)/path syntax for kernels and initrds in grub.conf (#114758, #125156, #120906)
* Thu Aug 05 2004 Jeremy Katz - 4.0.1-1- improve handling of arguments to init with initramfs (#129057)
* Tue Aug 03 2004 Jeremy Katz - 4.0.0-1- create an initramfs on 2.6 kernels instead of an initrd- use new mount magic instead of pivot_root on 2.6 kernels- try to handle the case of modules going away on kernel upgrades a little bit more nicely (#123994)- avoid over-zealous creation of /dev/mapper/control (#127115)- improve nash(8) manpage (#127413)
* Sat Jun 19 2004 Jeremy Katz - 3.5.24-1- fix usb-storage detection with 2.6 (#126309)
* Wed May 19 2004 Jeremy Katz - 3.5.23-1- add support for RAID6
* Thu May 13 2004 Jeremy Katz - add support for multipath personality from Tom Callaway (#120379)
* Fri May 07 2004 Jeremy Katz - 3.5.22-1- bump initrd size (#122325)
* Thu Apr 15 2004 Jeremy Katz - 3.5.21-1- new-kernel-package: add patch from Ryan Tilder to allow setting new kernel as default (#117605)- mkinitrd: i2o_pci isn\'t in 2.6 (#120827)- new-kernel-pkg: conditionalize kernel binary name for 2.6 vs 2.4 on ppc/ppc64 (as it\'s vmlinuz in 2.6 instead of the vmlinux from 2.4) (#120868)
* Wed Apr 14 2004 Jeremy Katz - 3.5.20-1- mkinitrd: minor regex fix for some kernel names (#120624)
* Tue Feb 10 2004 Jeremy Katz - 3.5.19-1- nash/mkinitrd: quiet mode for nash and necessary mkinitrd changes to work with it- mkinitrd: add lxo\'s patch for copying lvm.conf (#112099)- new-kernel-pkg: allow specifying the banner used in the boot loader config on the command line (#114809)
* Wed Jan 14 2004 Jeremy Katz - mkinitrd: add patch from Alex Kiernan for modules with multiple deps in 2.6 (#113306)
* Fri Jan 09 2004 Jeremy Katz 3.5.18-1- new-kernel-pkg: add a --kernel-arguments option (#113125)
* Wed Jan 07 2004 Jeremy Katz - fix ybin path (#112939)
* Mon Jan 05 2004 Jeremy Katz 3.5.17-1- mkinitrd: handle multiple spaces in modules.conf (from Lubomir Bulej)- nash: rebuild against new dietlibc fixing problems with root=LABEL= (#112623)- mkinitrd: determine kernel version and adjust modulefile appropriately so that we look at /etc/modprobe.conf for 2.6 kernels- mkinitrd: first pass at getting lvm working on 2.4 -> 2.6 upgrade | |
