Changelog for kernel-uek-debug-2.6.39-200.29.2.el5uek.i686.rpm :

* Sun Jul 15 2012 Joe Jin [2.6.39-200.29.2.el5uek]- epoll: clear the tfile_check_list on -ELOOP (Joe Jin) {CVE-2012-3375}- Don\'t limit non-nested epoll paths (Jason Baron)- epoll: kabi fixups for epoll limit wakeup paths (Joe Jin) {CVE-2011-1083}- epoll: limit paths (Jason Baron) {CVE-2011-1083}- cred: copy_process() should clear child->replacement_session_keyring (Oleg Nesterov) {CVE-2012-2745}
* Sat Jul 07 2012 Joe Jin [2.6.39-200.29.1.el5uek]- 3.0.x: hrtimer: Update hrtimer base offsets each hrtimer_interrupt (John Stultz)- 3.0.x: time: Fix leapsecond triggered hrtimer/futex load spike issue (John Stultz)- 3.0.x: hrtimer: Fix clock_was_set so it is safe to call from irq context (John Stultz)- Revert \"Fix clock_was_set so it is safe to call from atomic\"- Revert \"Fix leapsecond triggered hrtimer/futex load spike issue\"- Revert \"3.0.x: hrtimer: Update hrtimer base offsets each hrtimer_interrupt\"
* Sat Jul 07 2012 Joe Jin [2.6.39-200.28.1.el5uek]- Update hrtimer base offsets each hrtimer_interrupt(John Stultz) [Orabug: 14264454]
* Fri Jul 06 2012 Guru Anbalagane [2.6.39-200.27.1.el5uek]- SPEC: replace kernel-ovs to kernel-uek (Guru Anbalagane) [Orabug: 14238939]
* Fri Jul 06 2012 Maxim Uvarov [2.6.39-200.26.1.el5uek]- Fix leapsecond triggered hrtimer/futex load spike issue (John Stultz)- Fix clock_was_set so it is safe to call from atomic (John Stultz)
* Thu Jul 05 2012 Maxim Uvarov [2.6.39-200.25.1.el5uek]- dm-nfs: force random mode for the backend file (Joe Jin) [Orabug: 14092678]
* Sat Jun 23 2012 Guru Anbalagane [2.6.39-200.24.1.el5uek]- Revert \"Add Oracle VM guest messaging driver\" (Guru Anbalagane) [Orabug: 14233627}
* Fri Jun 22 2012 Guru Anbalagane [2.6.39-200.23.1.el5uek]- SPEC: add block/net modules to list used by installer (Guru Anbalagane) [Orabug: 14224837]
* Fri Jun 22 2012 Maxim Uvarov [2.6.39-200.22.1.el5uek]- NFSv4: include bitmap in nfsv4 get acl data (Andy Adamson) {CVE-2011-4131}- ocfs2:btrfs: aio-dio-loop changes broke setrlimit behavior [orabug 14207636] (Dave Kleikamp)- Add Oracle VM guest messaging driver (Zhigang Wang)- thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE (Andrea Arcangeli) [Orabug: 14217003]
* Wed Jun 20 2012 Maxim Uvarov [2.6.39-200.21.0.el5uek]- KVM: Fix buffer overflow in kvm_set_irq() (Avi Kivity) [Bugdb: 13966] {CVE-2012-2137}- net: sock: validate data_len before allocating skb in sock_alloc_send_pskb() (Jason Wang) [Bugdb: 13966] {CVE-2012-2136}- mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race condition (Andrea Arcangeli) [Bugdb: 13966] {CVE-2012-2373}- KVM: lock slots_lock around device assignment (Alex Williamson) [Bugdb: 13966] {CVE-2012-2121}- KVM: unmap pages from the iommu when slots are removed (Alex Williamson) [Bugdb: 13966] {CVE-2012-2121}- KVM: introduce kvm_for_each_memslot macro (Xiao Guangrong) [Bugdb: 13966]- fcaps: clear the same personality flags as suid when fcaps are used (Eric Paris) [Bugdb: 13966] {CVE-2012-2123}
* Sat Jun 16 2012 Maxim Uvarov [2.6.39-200.20.0.el5uek]- Update lpfc version for 8.3.5.68.6p driver release (Martin K. Petersen)- Fix system hang due to bad protection module parameters (CR 130769) (Martin K. Petersen)- oracleasm: Data integrity support (Martin K. Petersen)- sd: Allow protection_type to be overridden (Martin K. Petersen)- SCSI: Fix two bugs in DIX retry handling (Martin K. Petersen)- sd: Avoid remapping bad reference tags (Martin K. Petersen)- block: Fix bad range check in bio_sector_offset (Martin K. Petersen)
* Fri Jun 15 2012 Maxim Uvarov [2.6.39-200.19.0.el5uek]- xen/netback: Calculate the number of SKB slots required correctly (Simon Graham)
* Sat Jun 09 2012 Maxim Uvarov [2.6.39-200.18.0.el5uek]- e1000e: disable rxhash when try to enable jumbo frame also rxhash and rxcsum have enabled (Joe Jin)
* Thu Jun 07 2012 Maxim Uvarov [2.6.39-200.17.0.el5uek]- mm: reduce the amount of work done when updating min_free_kbytes (Mel Gorman) [Orabug: 14073214]- ocfs2: clear unaligned io flag when dio fails (Junxiao Bi) [Orabug: 14063941]- aio: make kiocb->private NUll in init_sync_kiocb() (Junxiao Bi) [Orabug: 14063941]- vmxnet3: cap copy length at size of skb to prevent dropped frames on tx (Neil Horman) [Orabug: 14159701]- mm/mempolicy.c: refix mbind_range() vma issue (KOSAKI Motohiro) [Orabug: 14149364]- mm/mempolicy.c: fix pgoff in mbind vma merge (Caspar Zhang) [Orabug:14149364]
* Wed Jun 06 2012 Maxim Uvarov [2.6.39-200.16.0.el5uek]- xen/gntdev: Fix merge error. (Konrad Rzeszutek Wilk)
* Sat Jun 02 2012 Maxim Uvarov [2.6.39-200.15.0.el5uek]- xen: expose host uuid via sysfs. (Zhigang Wang)
* Thu May 31 2012 Maxim Uvarov [2.6.39-200.14.0.el5uek]- SPEC: upgrade preserve rhck as a boot kernel (Kevin Lyons) [Orabug: 14065209]- hxge: update driver to 1.3.4 (Maxim Uvarov) [Orabug: 14134149]- SPEC: v2.6.39-200.12.0 (Maxim Uvarov)- Revert \"bnx2x: correction to firmware interface\" (Joe Jin)- cnic: fix bnx2fc_constants.h path (Maxim Uvarov)- bnx2x: PFC fix (Yaniv Rosner)- cnic: Fix parity error code conflict (Michael Chan)- bnx2x: Clear MDC/MDIO warning message (Yaniv Rosner)- bnx2x: Fix BCM578x0-SFI pre-emphasis settings (Yaniv Rosner)- bnx2x: Fix BCM57810-KR AN speed transition (Yaniv Rosner)- cnic: Re-init dev->stats_addr after chip reset (Michael Chan)- config: turn on CONFIG_HVC_XEN_FRONTEND (Maxim Uvarov) [Orabug: 14064174]- ixgbe: Don\'t set ip checksum if did not enable tso. (Joe Jin)- Revert \"x86, efi: Pass a minimal map to SetVirtualAddressMap()\" (Maxim Uvarov) [Orabug: 14076004]- r8169: add firmware files (Joe Jin)- e1000e: fix build warning. (Joe Jin)- bnx2x: file build warning (Joe Jin)- 8139too: Add 64bit statistics (Junchang Wang)- net: export netdev_stats_to_stats64 (Eric Dumazet)- r8169: enable transmit time stamping. (Joe Jin)- r8169: stop using net_device.{base_addr, irq}. (Francois Romieu)- r8169: move the driver removal method to the end of the driver file. (Francois Romieu)- r8169: fix unsigned int wraparound with TSO (Julien Ducourthial)- 8139cp: set intr mask after its handler is registered (Jason Wang)- r8169: enable napi on resume. (Artem Savkov)- r8169: runtime resume before shutdown. (françois romieu)- r8169: add 64bit statistics. (Junchang Wang)- r8169: corrupted IP fragments fix for large mtu. (françois romieu)- r8169: spinlock redux. (Francois Romieu)- r8169: avoid a useless work scheduling. (Francois Romieu)- r8169: move task enable boolean to bitfield. (Francois Romieu)- r8169: bh locking redux and task scheduling. (Francois Romieu)- r8169: fix early queue wake-up. (Francois Romieu)- r8169: remove work from irq handler. (Joe Jin)- r8169: missing barriers. (Francois Romieu)- r8169: irq mask helpers. (Francois Romieu)- r8169: factor out IntrMask writes. (Francois Romieu)- r8169: stop delaying workqueue. (Francois Romieu)- r8169: remove rtl8169_reinit_task. (Francois Romieu)- r8169: remove hardcoded PCIe registers accesses. (Francois Romieu)- 8139cp: fix missing napi_gro_flush. (françois romieu)- 8139cp/8139too: do not read into reserved registers (Jason Wang)- r8169: fix Config2 MSIEnable bit setting. (françois romieu)- r8169: fix Rx index race between FIFO overflow recovery and NAPI handler. (françois romieu)- r8169: Rx FIFO overflow fixes. (françois romieu)- corral some wayward N/A fw_version dust bunnies (Rick Jones)- ethernet: Convert MAC_ADDR_LEN uses to ETH_ALEN (Joe Jin)- sweep the floors and convert some .get_drvinfo routines to strlcpy (Joe Jin)- r8169: check firmware content sooner. (Francois Romieu)- r8169: support new firmware format. (Hayes Wang)- r8169: explicit firmware format check. (Francois Romieu)- r8169: move the firmware down into the device private data. (Francois Romieu)- r8169: increase the delay parameter of pm_schedule_suspend (hayeswang)- r8169: fix wrong eee setting for rlt8111evl (hayeswang)- r8169: fix driver shutdown WoL regression. (françois romieu)- Add ethtool -g support to 8139cp (Rick Jones)- sc92031: use standard #defines from mii.h. (françois romieu)- r8169: jumbo fixes. (Francois Romieu)- r8169: expand received packet length indication. (Francois Romieu)- r8169: support new chips of RTL8111F (Hayes Wang)- r8169: do not enable the TBI for anything but the original 8169. (Francois Romieu)- r8169: remove erroneous processing of always set bit. (Francois Romieu)- r8169: fix WOL setting for 8105 and 8111evl (Hayes Wang)- r8169: add MODULE_FIRMWARE for the firmware of 8111evl (Hayes Wang)- r8169: fix the reset setting for 8111evl (Hayes Wang)- r8169: define the early size for 8111evl (Hayes Wang)- r8169: convert to SKB paged frag API. (Ian Campbell)- 8139cp: convert to SKB paged frag API. (Ian Campbell)- net: remove use of ndo_set_multicast_list in realtek drivers (Joe Jin)- r8169 : MAC address change fix for the 8168e-vl. (françois romieu)- r8169: use pci_dev->subsystem_{vendor|device} (Sergei Shtylyov)- r8169: fix sticky accepts packet bits in RxConfig. (Francois Romieu)- r8169: adjust the RxConfig settings. (Hayes Wang)- r8169: don\'t enable rx when shutdown. (Hayes Wang)- r8169: fix wake on lan setting for non-8111E. (Hayes Wang)- r8169: support RTL8111E-VL. (Hayes Wang)- r8169: add ERI functions. (Hayes Wang)- r8169: modify the flow of the hw reset. (Hayes Wang)- r8169: adjust some registers. (Hayes Wang)- r8169: remove unnecessary read of PCI_CAP_ID_EXP (Jon Mason)- ixgbevf: print MAC via printk format specifier (Danny Kukawka)- ixgbevf: Update copyright notices (Greg Rose)- ixgbevf: Fix mailbox interrupt ack bug (Greg Rose)- ixgbevf: make operations tables const (Stephen Hemminger)- ixgbevf: fix sparse warnings (Stephen Hemminger)- ixgbevf: make ethtool ops and strings const (Stephen Hemminger)- ixgbevf: Prevent possible race condition by checking for message (Greg Rose)- ixgbevf: Fix register defines to correctly handle complex expressions (Alexander Duyck)- ixgbevf: Update release version (Greg Rose)- ixgbevf: Fix broken trunk vlan (Greg Rose)- ixgbevf: convert to ndo_fix_features (Joe Jin)- ixgbevf: Check if EOP has changed before using it (Greg Rose)- ixgbe: Correct flag values set by ixgbe_fix_features (Joe Jin)- ixgbe: fix typo in enumeration name (Don Skidmore)- ixgbe: Add support for enabling UDP RSS via the ethtool rx-flow-hash command (Joe Jin)- ixgbe: Whitespace cleanups (Joe Jin)- ixgbe: Two minor fixes for RSS and FDIR set queues functions (Alexander Duyck)- ixgbe: drop err_eeprom tag which is at same location as err_sw_init (Alexander Duyck)- ixgbe: Move poll routine in order to improve readability (Alexander Duyck)- ixgbe: cleanup logic for the service timer and VF hang detection (Alexander Duyck)- ixgbe: Fix issues with SR-IOV loopback when flow control is disabled (Alexander Duyck)- ixgbe: Place skb on first buffer_info structure to avoid using stack space (Joe Jin)- ixgbe: Use packets to track Tx completions instead of a seperate value (Alexander Duyck)- ixgbe: Modify setup of descriptor flags to avoid conditional jumps (Alexander Duyck)- ixgbe: Make certain that all frames fit minimum size requirements (Alexander Duyck)- ixgbe: cleanup logic in ixgbe_change_mtu (Alexander Duyck)- ixgbe: dcb: use DCB config values for FCoE traffic class on open (John Fastabend)- ixgbe: Fix race condition where RX buffer could become corrupted. (Atita Shirwaikar)- ixgbe: use typed min/max functions where possible (Jesse Brandeburg)- ixgbe: fix obvious return value bug. (Don Skidmore)- ixgbe: Replace eitr_low and eitr_high with static values in ixgbe_update_itr (Alexander Duyck)- ixgbe: Do not disable read relaxed ordering when DCA is enabled (Alexander Duyck)- ixgbe: Simplify logic for ethtool loopback frame creation and testing (Alexander Duyck)- ixgbe: Add iterator for cycling through rings on a q_vector (Alexander Duyck)- ixgbe: Allocate rings as part of the q_vector (Alexander Duyck)- ixgbe: Drop unnecessary napi_schedule_prep and spare blank line from ixgbe_intr (Alexander Duyck)- ixgbe: Default to queue pairs when number of queues is less than CPUs (Alexander Duyck)- ixgbe: Correct Adaptive Interrupt Moderation so that it will change values (Alexander Duyck)- ixgbe: Address issues with Tx WHTRESH value not being set correctly (Alexander Duyck)- ixgbe: Reorder adapter contents for better cache utilization (Joe Jin)- ixgbe: Do no clear Tx status bits since eop_desc provides enough info (Alexander Duyck)- ixgbe: remove tie between NAPI work limits and interrupt moderation (Jeff Kirsher)- ixgbe: dcb: check setup_tc return codes (John Fastabend)- ixgbe: Fix comments that are out of date or formatted incorrectly (Alexander Duyck)- ixgbe: fix spelling errors (Don Skidmore)- ixgbe: Minor formatting and comment corrections for ixgbe_xmit_frame_ring (Alexander Duyck)- ixgbe: Combine post-DMA processing of sk_buff fields into single function (Alexander Duyck)- ixgbe: Drop the _ADV of descriptor macros since all ixgbe descriptors are ADV (Alexander Duyck)- ixgbe: Add function for testing status bits in Rx descriptor (Alexander Duyck)- ixgbe: Let the Rx buffer allocation clear status bits instead of cleanup (Joe Jin)- ixgbe: Address fact that RSC was not setting GSO size for incoming frames (Alexander Duyck)- ixgbe: Minor refactor of RSC (Alexander Duyck)- ixgbe: ethtool: stats user buffer overrun (John Fastabend)- ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state (John Fastabend)- ixgbe: do not update real num queues when netdev is going away (Yi Zou)- ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size (Alexander Duyck)- ixgbe: Fix case of Tx Hang in PF with 32 VFs (Greg Rose)- ixgbe: fix vf lookup (Greg Rose)- ixgbe: Fix typo in ixgbe_common.h (Masanari Iida)- ixgbe: make ethtool strings table const (Stephen Hemminger)- ixgbe: Add warning when no space left for more MAC filters (Joe Jin)- ixgbe: update copyright to 2012 (Don Skidmore)- ixgbe: Add module parameter to allow untested and unsafe SFP+ modules (Peter P Waskiewicz Jr)- ixgbe: Fix register defines to correctly handle complex expressions (Alexander Duyck)- ixgbe: add support for new 82599 device. (Don Skidmore)- ixgbe: add support for new 82599 device id (Emil Tantilov)- ixgbe: add write flush in ixgbe_clock_out_i2c_byte() (Emil Tantilov)- ixgbe: fix typo\'s (Stephen Hemminger)- ixgbe: fix incorrect PHY register reads (Emil Tantilov)- ixgbe: Remove function prototype for non-existent function (Greg Rose)- ixgbe: DCB: IEEE transitions may fail to reprogram hardware. (John Fastabend)- ixgbe: DCBnl set_all, order of operations fix (Joe Jin)- ixgbe: fix LED blink logic to check for link (Emil Tantilov)- ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined (Rose, Gregory V)- ixgbe: DCB, return max for IEEE traffic classes (John Fastabend)- ixgbe: fix reading of the buffer returned by the firmware (Emil Tantilov)- ixgbe: Fix compiler warnings (Greg Rose)- ixgbe: fix smatch splat due to missing NULL check (John Fastabend)- ixgbe: fix disabling of Tx laser at probe (Emil Tantilov)- ixgbe: Fix link issues caused by a reset while interface is down (Emil Tantilov)- ixgbe: change the eeprom version reported by ethtool (Emil Tantilov)- ixgbe: allow eeprom writes via ethtool (Emil Tantilov)- ixgbe: fix endianess when writing driver version to firmware (Emil Tantilov)- ixgbe: fix skb truesize underestimation (Eric Dumazet)- ixgbe: Correct check for change in FCoE priority (Mark Rustad)- ixgbe: Add FCoE DDP allocation failure counters to ethtool stats. (Amir Hanania)- ixgbe: Add protection from VF invalid target DMA (Greg Rose)- ixgbe: bump version number (Don Skidmore)- ixgbe: X540 devices RX PFC frames pause traffic even if disabled (John Fastabend)- ixgbe: DCB X540 devices support max traffic class of 4 (John Fastabend)- ixgbe: fixup hard dependencies on supporting 8 traffic classes (Joe Jin)- ixgbe: Fix PFC mask generation (Mark Rustad)- ixgbe: remove instances of ixgbe_phy_aq for 82598 and 82599 (Emil Tantilov)- ixgbe: get pauseparam autoneg (Mika Lansirinne)- ixgbe: do not disable flow control in ixgbe_check_mac_link (Emil Tantilov)- ixgbe: send MFLCN to ethtool (Emil Tantilov)- ixgbe: add support for new 82599 device (Emil Tantilov)- ixgbe: fix driver version initialization in firmware (Jacob Keller)- ixgbe: remove return code for functions that always return 0 (Emil Tantilov)- ixgbe: clear the data field in ixgbe_read_i2c_byte_generic (Emil Tantilov)- ixgbe: prevent link checks while resetting (Emil Tantilov)- ixgbe: add ECC warning for legacy interrupts (Don Skidmore)- ixgbe: cleanup ixgbe_setup_gpie() for X540 (Don Skidmore)- ixgbe add thermal sensor support for x540 hardware (Jacob Keller)- ixgbe: update {P}FC thresholds to account for X540 and loopback (John Fastabend)- ixgbe: disable LLI for FCoE (Vasu Dev)- ixgbe: Cleanup q_vector interrupt throttle rate logic (Emil Tantilov)- ixgbe: remove global reset to the MAC (Emil Tantilov)- ixgbe: add WOL support for X540 (Emil Tantilov)- ixgbe: avoid HW lockup when adapter is reset with Tx work pending (Emil Tantilov)- ixgbe: dcb, set priority to traffic class mappings (John Fastabend)- ixgbe: cleanup X540 interrupt enablement (Don Skidmore)- ixgbe: DCB, do not call set_state() from IEEE mode (Joe Jin)- ixgbe: Reconfigure SR-IOV Init (Greg Rose)- ixgbe: remove duplicate netif_tx_start_all_queues (Emil Tantilov)- ixgbe: fix FCRTL/H register dump for X540 (Emil Tantilov)- ixgbe: cleanup some register reads (Emil Tantilov)- ixgbe: Make better use of memory allocations in one-buffer mode w/ RSC (Alexander Duyck)- ixgbe: drop adapter from ixgbe_fso call documentation (Alexander Duyck)- ixgbe: Add SFP support for missed 82598 PHY (Alexander Duyck)- ixgbe: Add missing code for enabling overheat sensor interrupt (Alexander Duyck)- ixgbe: make ixgbe_up and ixgbe_up_complete void functions (Alexander Duyck)- v2 ixgbe: Update packet buffer reservation to correct fdir headroom size (Alexander Duyck)- ixgbe: remove redundant configuration of tx_sample_rate (Alexander Duyck)- ixgbe: Correctly name and handle MSI-X other interrupt (Alexander Duyck)- ixgbe: cleanup configuration of EITRSEL and VF reset path (Alexander Duyck)- ixgbe: cleanup reset paths (Alexander Duyck)- ixgbe: Update TXDCTL configuration to correctly handle WTHRESH (Alexander Duyck)- ixgbe: combine PCI_VDEVICE and board declaration to same line (Alexander Duyck)- ixgbe: Drop unnecessary adapter->hw dereference in loopback test setup (Alexander Duyck)- ixgbe: commonize ixgbe_map_rings_to_vectors to work for all interrupt types (Alexander Duyck)- ixgbe: Use ring->dev instead of adapter->pdev->dev when updating DCA (Alexander Duyck)- ixgbe: cleanup allocation and freeing of IRQ affinity hint (Alexander Duyck)- v2 ixgbe: consolidate all MSI-X ring interrupts and poll routines into one (Alexander Duyck)- ixgbe: Change default Tx work limit size to 256 buffers (Alexander Duyck)- ixgbe: clear RNBC only for 82598 (Emil Tantilov)- ixgbe: add check for supported modes (Emil Tantilov)- ixgbe: fix ixgbe_fc_autoneg_fiber bug (Don Skidmore)- ixgbe: cleanup feature flags in ixgbe_probe (Don Skidmore)- ixgbe: PFC not cleared on X540 devices (John Fastabend)- ixgbe: consolidate, setup for multiple traffic classes (John Fastabend)- ixgbe: remove unneeded fdir pb alloc case (John Fastabend)- ixgbe: fixup remaining call sites for arbitrary TCs (John Fastabend)- ixgbe: Always tag VLAN tagged packets (Alexander Duyck)- ixgbe: Add support for setting CC bit when SR-IOV is enabled (Alexander Duyck)- ixgbe: convert rings from q_vector bit indexed array to linked list (Alexander Duyck)- ixgbe: Simplify transmit cleanup path (Alexander Duyck)- ixgbe: Cleanup FCOE and VLAN handling in xmit_frame_ring (Alexander Duyck)- ixgbe: replace reference to CONFIG_FCOE with IXGBE_FCOE (Alexander Duyck)- ixgbe - DDP last user buffer - error to warn (Amir Hanania)- ixgbe: remove unused fcoe.tc field and fcoe_setapp() (John Fastabend)- ixgbe: complete FCoE initialization from setapp() routine (John Fastabend)- ixgbe: DCB, remove unneeded ixgbe_dcb_txq_to_tc() routine (John Fastabend)- ixgb: Remove unnecessary defines, use pr_debug (Joe Perches)- ixgb: finish conversion to ndo_fix_features (Michał Mirosław)- ixgb: eliminate checkstack warnings (Jesse Brandeburg)- ixgb: convert to ndo_fix_features (Michał Mirosław)- igbvf: fix the bug when initializing the igbvf (Samuel Liao)- rename dev_hw_addr_random and remove redundant second (Joe Jin)- ixgbevf: Convert printks to pr_ (Jeff Kirsher)- igbvf: Use ETH_ALEN (Joe Perches)- igbvf: reset netdevice addr_assign_type if changed (Danny Kukawka)- igbvf: refactor Interrupt Throttle Rate code (Mitch A Williams)- igbvf: change copyright date (Mitch A Williams)- igbvf: Remove unnecessary irq disable/enable (Joe Jin)- igbvf: remove unneeded cast (Stephen Hemminger)- igbvf: Convert printks to pr_ (Jeff Kirsher)- igbvf: Bump version number (Williams, Mitch A)- igbvf: Update module identification strings (Williams, Mitch A)- igbvf: fix truesize underestimation (Eric Dumazet)- igbvf: Fix trunk vlan (Greg Rose)- igbvf: convert to ndo_fix_features (Michał Mirosław)- igb: fix rtnl race in PM resume path (Benjamin Poirier)- igb: fix warning about unused function (Emil Tantilov)- igb: fix vf lookup (Greg Rose)- igb: Update Copyright on all Intel copyrighted files. (Carolyn Wyborny)- igb: make local functions static (Stephen Hemminger)- igb: reset PHY after recovering from PHY power down (Koki Sanagi)- igb: add basic runtime PM support (Yan, Zheng)- igb: Add flow control advertising to ethtool setting. (Carolyn Wyborny)- igb: Update DMA Coalescing threshold calculation. (Matthew Vick)- igb: Convert bare printk to pr_notice (Joe Perches)- igb: Convert printks to pr_ (Jeff Kirsher)- igb: Fix for I347AT4 PHY cable length unit detection (Kantecki, Tomasz)- igb: VFTA Table Fix for i350 devices (Carolyn Wyborny)- igb: Move DMA Coalescing init code to separate function. (Carolyn Wyborny)- igb: Fix for Alt MAC Address feature on 82580 and later devices (Carolyn Wyborny)- igb: fix a compile warning (RongQing Li)- igb: Check if subordinate VFs are assigned to virtual machines (Greg Rose)- pci: Add flag indicating device has been assigned by KVM (Greg Rose)- igb: enable l4 timestamping for v2 event packets (Jacob Keller)- igb: fix skb truesize underestimation (Eric Dumazet)- igb: Version bump. (Carolyn Wyborny)- igb: Loopback functionality supports for i350 devices (Akeem G. Abodunrin)- igb: fix static function warnings reported by sparse (Emil Tantilov)- igb: Add workaround for byte swapped VLAN on i350 local traffic (Alexander Duyck)- igb: Drop unnecessary write of E1000_IMS from igb_msix_other (Alexander Duyck)- igb: Fix features that are currently 82580 only and should also be i350 (Alexander Duyck)- igb: Make certain one vector is always assigned in igb_request_irq (Alexander Duyck)- igb: avoid unnecessarily creating a local copy of the q_vector (Alexander Duyck)- igb: add support for NETIF_F_RXHASH (Alexander Duyck)- igb: move TX hang check flag into ring->flags (Alexander Duyck)- igb: fix recent VLAN changes that would leave VLANs disabled after reset (Alexander Duyck)- igb: leave staterr in place and instead us a helper function to check bits (Alexander Duyck)- igb: retire the RX_CSUM flag and use the netdev flag instead (Alexander Duyck)- igb: cleanup IVAR configuration (Alexander Duyck)- igb: Move ITR related data into work container within the q_vector (Alexander Duyck)- igb: Consolidate all of the ring feature flags into a single value (Alexander Duyck)- igb: avoid unnecessary conversions from u16 to int (Alexander Duyck)- igb: Use node specific allocations for the q_vectors and rings (Alexander Duyck)- igb: push data into first igb_tx_buffer sooner to reduce stack usage (Alexander Duyck)- igb: consolidate creation of Tx buffer info and data descriptor (Alexander Duyck)- igb: Combine all flag info fields into a single tx_flags structure (Alexander Duyck)- igb: Cleanup protocol handling in transmit path (Alexander Duyck)- igb: Create separate functions for generating cmd_type and olinfo (Alexander Duyck)- igb: Make first and tx_buffer_info->next_to_watch into pointers (Alexander Duyck)- igb: Consolidate creation of Tx context descriptors into a single function (Alexander Duyck)- intel: convert to SKB paged frag API. (Ian Campbell)- ixgbe: Refactor transmit map and cleanup routines (Alexander Duyck)- igb: split buffer_info into tx_buffer_info and rx_buffer_info (Alexander Duyck)- igb: Make Tx budget for NAPI user adjustable (Alexander Duyck)- igb: Alternate MAC Address Updates for Func2&3 (Akeem G. Abodunrin)- igb: Alternate MAC Address EEPROM Updates (Akeem G. Abodunrin)- igb: Code to prevent overwriting SFP I2C (Akeem G. Abodunrin)- igb: Remove multi_tx_table and simplify igb_xmit_frame (Alexander Duyck)- igb: drop the \"adv\" off function names relating to descriptors (Joe Jin)- igb: Replace E1000_XX_DESC_ADV with IGB_XX_DESC (Alexander Duyck)- igb: Refactor clean_rx_irq to reduce overhead and improve performance (Alexander Duyck)- igb: update ring and adapter structure to improve performance (Alexander Duyck)- igb: streamline Rx buffer allocation and cleanup (Alexander Duyck)- igb: drop support for single buffer mode (Alexander Duyck)- igb: Update max_frame_size to account for an optional VLAN tag if present (Alexander Duyck)- igb: Update RXDCTL/TXDCTL configurations (Alexander Duyck)- igb: remove duplicated #include (Huang Weiyi)- igb: Fix for DH89xxCC near end loopback test (Robert Healy)- igb: do vlan cleanup (Jiri Pirko)- igb: Add support of SerDes Forced mode for certain hardware (Carolyn Wyborny)- igb: Update copyright on all igb driver files. (Carolyn Wyborny)- net: igb: Use is_multicast_ether_addr helper (Tobias Klauser)- igb: remove unnecessary reads of PCI_CAP_ID_EXP (Jon Mason)- igb: convert to ndo_fix_features (Michał Mirosław)- igb: Change version to remove number after -k in kernel versions. (Carolyn Wyborny)- e1000e: Fix default interrupt throttle rate not set in NIC HW (Jeff Kirsher)- e1000e: MSI interrupt test failed, using legacy interrupt (Prasanna S Panchamukhi)- e1000e: issues in Sx on 82577/8/9 (Joe Jin)- e1000e: Guarantee descriptor writeback flush success. (Matthew Vick)- e1000e: prevent oops when adapter is being closed and reset simultaneously (Bruce Allan)- e1000e: use msleep instead of mdelay (Joe Jin)- e1000e: cleanup goto statements to exit points without common work (Bruce Allan)- e1000e: potentially incorrect return for e1000e_setup_fiber_serdes_link (Bruce Allan)- e1000e: potentially incorrect return for e1000_init_hw_ich8lan (Bruce Allan)- e1000e: cleanup: minor whitespace addition (insert blank line separator) (Bruce Allan)- e1000e: cleanup: remove unnecessary variable initializations (Bruce Allan)- e1000e: cleanup: remove unnecessary test and return (Bruce Allan)- e1000e: cleanup: remove unnecessary variable ret_val (Bruce Allan)- e1000e: cleanup: remove unreachable statement (Bruce Allan)- e1000e: potentially incorrect return for e1000_set_d3_lplu_state_ich8lan (Bruce Allan)- e1000e: cleanup: always return 0 (Bruce Allan)- e1000e: cleanup: remove unnecessary assignments just before returning (Bruce Allan)- e1000e: potential incorrect return for e1000_setup_copper_link_80003es2lan (Bruce Allan)- e1000e: potentially incorrect return for e1000_cfg_kmrn_10_100_80003es2lan (Bruce Allan)- e1000e: cleanup: rename goto labels to be more meaningful (Bruce Allan)- e1000e: cleanup: use goto for common work needed by multiple exit points (Bruce Allan)- e1000e: replace \'1\' with \'true\' for boolean get_link_status (Bruce Allan)- e1000e: pass pointer to hw struct for e1000_init_mac_params_XXX() (Bruce Allan)- e1000e: use true/false for bool autoneg_false (Bruce Allan)- e1000e: remove unnecessary parentheses (Bruce Allan)- e1000e: remove unnecessary returns from void functions (Bruce Allan)- e1000e: remove test that is always false (Bruce Allan)- e1000e: WoL fails on device ID 0x1501 (Joe Jin)- e1000e: WoL can fail on 82578DM (Bruce Allan)- e1000e: remove redundant reverse dependency on CRC32 (Bruce Allan)- e1000e: minor whitespace and indentation cleanup (Bruce Allan)- e1000e: fix sparse warnings with -D__CHECK_ENDIAN__ (Bruce Allan)- e1000e: fix checkpatch warning from MINMAX test (Bruce Allan)- e1000e: cleanup - use braces in both branches of a conditional statement (Bruce Allan)- e1000e: cleanup e1000_set_phys_id (Bruce Allan)- e1000e: cleanup e1000_init_mac_params_82571() (Bruce Allan)- e1000e: cleanup e1000_init_mac_params_80003es2lan() (Bruce Allan)- e1000e: rename es2lan.c to 80003es2lan.c (Joe Jin)- e1000e: cleanup - check return values consistently (Bruce Allan)- e1000e: add missing initializers reported when compiling with W=1 (Bruce Allan)- e1000e: update copyright year (Bruce Allan)- e1000e: split lib.c into three more-appropriate files (Bruce Allan)- e1000e: call er16flash() instead of __er16flash() (Bruce Allan)- e1000e: increase version number (Joe Jin)- e1000e: convert final strncpy() to strlcpy() (Bruce Allan)- e1000e: concatenate long debug strings which span multiple lines (Bruce Allan)- e1000e: conditionally restart autoneg on 82577/8/9 when setting LPLU state (Bruce Allan)- e1000e: increase Rx PBA to prevent dropping received packets on 82566/82567 (Bruce Allan)- e1000e: ICHx/PCHx LOMs should use LPLU setting in NVM when going to Sx (Joe Jin)- e1000e: update workaround for 82579 intermittently disabled during S0->Sx (Bruce Allan)- e1000e: disable Early Receive DMA on ICH LOMs (Bruce Allan)- e1000e: Need to include vmalloc.h (David S. Miller)- e1000e: 82574/82583 Tx hang workaround (Bruce Allan)- e1000e: use hardware default values for Transmit Control register (Bruce Allan)- e1000e: use default settings for Tx Inter Packet Gap timer (Bruce Allan)- e1000e: 82579: workaround for link drop issue (Bruce Allan)- e1000e: always set transmit descriptor control registers the same (Bruce Allan)- e1000e: re-factor ethtool get/set ring parameter (Bruce Allan)- e1000e: pass pointer to ring struct instead of adapter struct (Joe Jin)- e1000e: add Receive Packet Steering (RPS) support (Joe Jin)- e1000e: convert to netdev features/hw_features API (Joe Jin)- e1000e: cleanup Rx checksum offload code (Bruce Allan)- e1000e: convert head, tail and itr_register offsets to __iomem pointers (Bruce Allan)- e1000e: re-enable alternate MAC address for all devices which support it (Bruce Allan)- e1000e: default IntMode based on kernel config & available hardware support (Bruce Allan)- e1000e: convert to real ndo_set_rx_mode (Joe Jin)- net: introduce IFF_UNICAST_FLT private flag (Joe Jin)- e1000e: remove use of ndo_set_multicast_list in drivers (Joe Jin)- e1000e: Convert printks to pr_ (Jeff Kirsher)- e1000e: demote a debugging WARN to a debug log message (Bruce Allan)- e1000e: fix skb truesize underestimation (Eric Dumazet)- e1000e: locking bug introduced by commit 67fd4fcb (Bruce Allan)- e1000e: bad short packets received when jumbos enabled on 82579 (Bruce Allan)- e1000e: convert driver to use extended descriptors (Joe Jin)- drivers/net: Add module.h to drivers who were implicitly using it (Joe Jin)- e1000e: hitting BUG_ON() from napi_enable (Bruce Allan)- e1000: Silence sparse warnings by correcting type (Andrei Emeltchenko)- v2 e1000: Neaten e1000_dump function (Tushar Dave)- e1000: Neaten e1000_config_dsp_after_link_change (Joe Perches)- e1000: fix vlan processing regression (Joe Jin)- e1000: Remove unnecessary k.alloc/v.alloc OOM messages (Joe Jin)- e1000: add dropped DMA receive enable back in for WoL (Dean Nelson)- e1000: Adding e1000_dump function (Tushar Dave)- e1000: don\'t enable dma receives until after dma address has been setup (Dean Nelson)- e1000: save skb counts in TX to avoid cache misses (Dean Nelson)- e1000: cleanup CE4100 MDIO registers access (Florian Fainelli)- e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove (Florian Fainelli)- e1000: fix lockdep splat in shutdown handler (Jesse Brandeburg)- e1000e/ixgb: fix assignment of 0/1 to bool variables. (Joe Jin)- intel: Convert _LENGTH_OF_ADDRESS to ETH_ALEN (Joe Perches)- e1000: fix skb truesize underestimation (Eric Dumazet)- e1000: convert to private mutex from rtnl (Jesse Brandeburg)- e1000: convert mdelay to msleep (Jesse Brandeburg)- e1000: convert hardware management from timers to threads (Jesse Brandeburg)- e100: Remove alloc_etherdev error messages (Joe Jin)- net: Remove Intel NICs unnecessary driver assignments of ethtool_ringparam fields to zero (Joe Jin)- e100: Show short v/s long rx length errors in ethtool stats. (Ben Greear)- e100: Fix rx-over-length statistics. (Ben Greear)- e100: make sure vlan support isn\'t advertised on old adapters (Jesse Brandeburg)- 8139cp: properly config rx mode after resuming (Jason Wang)- bnx2x: add bnx2x firmware 7.2.16 (Joe Jin)- bnx2fc: Remove bh disable in softirq context (Neil Horman)- bnx2fc: HSI dependent changes for 7.2.xx FW (Bhanu Prakash Gollapudi)- bnx2fc: Bumped version to 1.0.10 (Bhanu Prakash Gollapudi)- bnx2fc: NPIV ports go offline when interface is brought down & up (Bhanu Prakash Gollapudi)- bnx2fc: Handle LOGO flooding from the target (Bhanu Prakash Gollapudi)- bnx2fc: fix panic in bnx2fc_post_io_req (Bhanu Prakash Gollapudi)- bnx2fc: Bumped version to 1.0.9 (Bhanu Prakash Gollapudi)- bnx2fc: Handle SRR LS_ACC drop scenario (Bhanu Prakash Gollapudi)- bnx2fc: Handle ABTS timeout during ulp timeout (Bhanu Prakash Gollapudi)- bnx2fc: Bumped version to 1.0.8 (Bhanu Prakash Gollapudi)- bnx2fc: Return error statistics of remote peer (Bhanu Prakash Gollapudi)- bnx2fc: call ctlr_link_up only when the interface is enabled (Bhanu Prakash Gollapudi)- bnx2fc: Bumped version to 1.0.7 (Bhanu Prakash Gollapudi)- bnx2fc: Handle bnx2fc_map_sg failure (Bhanu Prakash Gollapudi)- bnx2fc: Replace scsi_dma_map() with dma_map_sg(). (Bhanu Prakash Gollapudi)- bnx2fc: Bumped version to 1.0.6 (Bhanu Prakash Gollapudi)- bnx2fc: Fix FW assert during RSCN stress tests (Bhanu Prakash Gollapudi)- bnx2fc: Fix panic caused because of incorrect errror handling in create(). (Bhanu Prakash Gollapudi)- bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks (Bhanu Prakash Gollapudi)- bnx2fc: Validate vlan id in NETDEV_UNREGISTER handler (Nithin Nayak Sujir)- bnx2fc: No abort issued for REC when it times out (Bhanu Prakash Gollapudi)- bnx2fc: Send solicitation only after vlan discovery is complete (Bhanu Prakash Gollapudi)- bnx2fc: Reset max receive frame size during link up (Bhanu Prakash Gollapudi)- bnx2fc: Need not schedule destroy_work from __bnx2fc_destroy (Bhanu Prakash Gollapudi)- bnx2fc: Bump version to 1.0.5 (Bhanu Prakash Gollapudi)- bnx2fc: Prevent creating of NPIV port with duplicate WWN (Bhanu Prakash Gollapudi)- bnx2fc: Obtain WWNN/WWPN from the shared memory (Bhanu Prakash Gollapudi)- [SCSI] fcoe,libfcoe: Move common code for fcoe_get_lesb to fcoe_transport (Bhanu Prakash Gollapudi)- [SCSI] fcoe: Move common functions to fcoe_transport library (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Drop incoming ABTS (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: code cleanup in bnx2fc_offload_session (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Fix NULL pointer deref during arm_cq. (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: IO errors when receiving unsolicited LOGO (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Do not reuse the fcoe connection id immediately (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Clear DESTROY_CMPL flag after firmware destroy (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Handle NETDEV_UNREGISTER for vlan devices (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Reorganize cleanup code between interface_cleanup and if_destory (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Change function names of bnx2fc_netdev_setup/bnx2fc_netdev_cleanup (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Do not attempt destroying NPIV port twice (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Remove erroneous kref_get on IO request (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Enable bsg_request support for bnx2fc (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Bug fixes in percpu_thread_create/destroy (Bhanu Prakash Gollapudi)- [SCSI] bnx2fc: Reset the max receive frame size (Bhanu Prakash Gollapudi)- [SCSI] bnx2i: Fixed the override of the error_mask module param (Eddie Wai)- [SCSI] bnx2i: use kthread_create_on_node() (Eric Dumazet)- [SCSI] bnx2i: Fixed kernel panic caused by unprotected task->sc->request deref (Eddie Wai)- [SCSI] bnx2i: Fixed the endian on TTT for NOP out transmission (Eddie Wai)- [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu (Eddie Wai)- cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig. (David S. Miller)- bnx2x: Fix 578xx link LED (Yaniv Rosner)- bnx2x: Enable FEC for 57810-KR (Yaniv Rosner)- bnx2x: disable dcb on 578xx since not supported yet (Dmitry Kravkov)- bnx2x: decrease print level to debug (Dmitry Kravkov)- bnx2x: fix BRB thresholds for dropless_fc mode (Dmitry Kravkov)- bnx2x: fix cl_id allocation for non-eth clients for NPAR mode (Dmitry Kravkov)- bnx2x: Fix for a host coalescing bug which impared latency. (Ariel Elior)- bnx2x: fix select_queue when FCoE is disabled (Vladislav Zolotarov)- bnx2x: fix WOL by enablement PME in config space (Dmitry Kravkov)- bnx2x: Fix XMAC loopback test (Yaniv Rosner)- bnx2x: init FCOE FP only once (Vladislav Zolotarov)- bnx2x: Remove fiber remote fault detection (Yaniv Rosner)- cnic: update for FW 7.2.xx (Michael Chan)- bnx2x: correction to firmware interface (Yuval Mintz)- bnx2x: fix vector traveling while looking for an empty entry (Dmitry Kravkov)- bnx2x: mark functions as loaded on shared memory (Yuval Mintz)- bnx2x: fix memory leak in bnx2x_init_firmware() (Michal Schmidt)- bnx2x: fix a crash on corrupt firmware file (Michal Schmidt)- bnx2x: make bnx2x_close() static again (Michal Schmidt)- bnx2x: removed code re-checking memory base after device open (Mintz Yuval)- bnx2x: allow BCM84833 phy to advertise 100Base-T speeds (Mintz Yuval)- bnx2x: notify cnic of address of info-to-the-mcp (Mintz Yuval)- bnx2x: allocate smaller Rx rings for 1G functions (Mintz Yuval)- bnx2x: allocate memory dynamically in ethtool self-test. (Merav Sicron)- bnx2x: force 10G on 84833 phy should be autoneg with only 10G advertised (Yaniv Rosner)- bnx2x: added autoneg-restart after link advertisement changes (Yaniv Rosner)- bnx2x: ethtool publishes link partners speed and FC (Mintz Yuval)- bnx2x: half duplex support added for several boards (Yaniv Rosner)- bnx2x: remove the \'poll\' module option (Michal Schmidt)- bnx2x: fix bnx2x_storm_stats_update() on big endian (Eric Dumazet)- bnx2x: Fix mem leak in bnx2x_tpa_stop() if build_skb() fails. (Jesper Juhl)- bnx2x: Update version to 1.72.0 and copyrights (Ariel Elior)- bnx2x: Recoverable and unrecoverable error statistics (Ariel Elior)- bnx2x: Recovery flow bug fixes (Ariel Elior)- bnx2x: init fw_seq after undi_unload is done (Dmitry Kravkov)- bnx2x: Track active PFs with bitmap (Ariel Elior)- bnx2x: Lock PF-common resources (Ariel Elior)- bnx2x: don\'t reset device while reading its configuration. (Dmitry Kravkov)- bnx2x: Loaded Firmware Version Validation (Ariel Elior)- bnx2x: Function Level Reset Final Cleanup (Ariel Elior)- bnx2x: Obtain Bus Device Function from register (Ariel Elior)- bnx2x: Removing indirect register access (Ariel Elior)- bnx2x: Support Queue Per Cos in 5771xx devices (Ariel Elior)- bnx2x: Remove 100Mb force speed for BCM84833 (Yaniv Rosner)- bnx2x: Fix ethtool advertisement (Yaniv Rosner)- bnx2x: unlock before returning an error (Dan Carpenter)- bnx2x: fix compilation error with SOE in fw_dump (Yuval Mintz)- bnx2x: handle CHIP_REVISION during init_one (Ariel Elior)- bnx2x: don\'t access removed registers on 57712 and above (Dmitry Kravkov)- bnx2x: properly clean indirect addresses (Dmitry Kravkov)- bnx2x: allow user to change ring size in ISCSI SD mode (Dmitry Kravkov)- bnx2x: fix Big-Endianess in ethtool -t (Dmitry Kravkov)- bnx2x: fixed ethtool statistics for MF modes (Yuval Mintz)- bnx2x: credit-leakage fixup on vlan_mac_del_all (Yuval Mintz)- bnx2x: Disable AN KR work-around for BCM57810 (Yaniv Rosner)- bnx2x: Remove AutoGrEEEn for BCM84833 (Yaniv Rosner)- bnx2x: Fix PFC setting on BCM57840 (Yaniv Rosner)- bnx2x: Fix Super-Isolate mode for BCM84833 (Yaniv Rosner)- bnx2x: handle vpd data longer than 128 bytes (Barak Witkowski)- bnx2x: properly update skb when mtu > 1500 (Dmitry Kravkov)- bnx2x: properly initialize L5 features (Joe Jin)- bnx2x: fix typo in fcoe stats collection (Barak Witkowski)- bnx2x: Fix compile errors if CONFIG_CNIC is not set (Michael Chan)- bnx2x, cnic: support DRV_INFO upon FW request (Barak Witkowski)- bnx2x: support classification config query (Ariel Elior)- bnx2x: add fcoe statistics (Barak Witkowski)- bnx2x: add PFC statistics (Barak Witkowski)- bnx2x: Use kcalloc instead of kzalloc to allocate array (Thomas Meyer)- bnx2x: handle iSCSI SD mode (Dmitry Kravkov)- bnx2x: fix rx ring size report (Vladislav Zolotarov)- bnx2x: Change value comparison order (Yaniv Rosner)- bnx2x: Cosmetic changes (Yaniv Rosner)- bnx2x: Fix self test of BCM57800 (Yaniv Rosner)- bnx2x: Add known PHY type check (Yaniv Rosner)- bnx2x: Change Warpcore MDIO work around mode (Yaniv Rosner)- bnx2x: Fix BCM84833 link and LED behavior (Yaniv Rosner)- bnx2x: Warpcore HW reset following fan failure (Yaniv Rosner)- bnx2x: ETS changes (Yaniv Rosner)- bnx2x: Fix ETS bandwidth (Yaniv Rosner)- bnx2x: PFC changes (Yaniv Rosner)- bnx2x: Fix 5461x LED (Yaniv Rosner)- bnx2x: cache-in compressed fw image (Dmitry Kravkov)- bnx2x: add endline at end of message (Dmitry Kravkov)- bnx2x: uses build_skb() in receive path (Eric Dumazet)- net: introduce build_skb() (Eric Dumazet)- net: more accurate skb truesize (Eric Dumazet)- bnx2x: update driver version to 1.70.35-0 (Dmitry Kravkov)- bnx2x: Remove on-stack napi struct variable (Ariel Elior)- bnx2x: prevent race in statistics flow (Dmitry Kravkov)- bnx2x: add fan failure event handling (Ariel Elior)- bnx2x: remove unused #define (Dmitry Kravkov)- bnx2x: simplify definition of RX_SGE_MASK_LEN and use it. (Dmitry Kravkov)- bnx2x: propagate DCBX negotiation (Dmitry Kravkov)- bnx2x: fix MF for 4-port devices (Dmitry Kravkov)- bnx2x: DCBX: use #define instead of magic (Dmitry Kravkov)- bnx2x: separate FCoE and iSCSI license initialization. (Joe Jin)- bnx2x: remove unused variable (Dmitry Kravkov)- bnx2x: use rx_queue index for skb_record_rx_queue() (Dmitry Kravkov)- bnx2x: allow FCoE and DCB for 578xx (Joe Jin)- bnx2x: update driver version to 1.70.30-0 (Dmitry Kravkov)- bnx2x: use FW 7.0.29.0 (Dmitry Kravkov)- bnx2x: add bnx2x FW 7.0.29 (Joe Jin)- bnx2x: Enable changing speed when port type is PORT_DA (Yaniv Rosner)- bnx2x: Fix 54618se LED behavior (Yaniv Rosner)- bnx2x: Fix RX/TX problem caused by the MAC layer (Yaniv Rosner)- bnx2x: Add link retry to 578xx-KR (Yaniv Rosner)- bnx2x: Fix LED blink rate for 578xx (Yaniv Rosner)- bnx2x: fix skb truesize underestimation (Eric Dumazet)- bnx2x: remove some dead code (Dan Carpenter)- bnx2x: Fix build error (Dmitry Kravkov)- bnx2x: Add new PHY BCM54616 (Yaniv Rosner)- bnx2x: resurrect RX hashing (Joe Jin)- bnx2x: convert to SKB paged frag API. (Ian Campbell)- net: add APIs for manipulating skb page fragments. (Ian Campbell)- bnx2x: Use pr_fmt and message logging cleanups (Joe Jin)- bnx2x: Coalesce pr_cont uses and fix DP typos (Joe Perches)- bnx2x: Remove local defines for %pM and mac address (Joe Perches)- bnx2x: Clear MDIO access warning during first driver load (Yaniv Rosner)- bnx2x: Fix BCM578xx MAC test (Yaniv Rosner)- bnx2x: Fix BCM54618se invalid link indication (Yaniv Rosner)- bnx2x: Fix BCM84833 link (Yaniv Rosner)- bnx2x: Fix link issue with DAC over 578xx (Yaniv Rosner)- bnx2x: Fix LED behavior (Yaniv Rosner)- bnx2x: Fix BCM578xx-B0 MDIO access (Yaniv Rosner)- bnx2x: Fix remote fault handling (Yaniv Rosner)- bnx2x: Fix chip hanging due to TX pipe stall. (Yaniv Rosner)- bnx2x: Fix missing pause on for 578xx (Yaniv Rosner)- bnx2x: Prevent restarting Tx during bnx2x_nic_unload (Vladislav Zolotarov)- bnx2x: use pci_pcie_cap() (Vladislav Zolotarov)- bnx2x: fix bnx2x_stop_on_error flow in bnx2x_sp_rtnl_task (Vladislav Zolotarov)- bnx2x: enable internal target-read for 57712 and up only (Shmulik Ravid)- bnx2x: count statistic ramrods on EQ to prevent MC assert (Vladislav Zolotarov)- bnx2x: fix loopback for non 10G link (Yaniv Rosner)- bnx2x: dcb - send all unmapped priorities to same COS as L2 (Dmitry Kravkov)- bnx2x: Broken self-test in SF mode on 578xx (Vladislav Zolotarov)- bnx2x: Parity errors recovery for 578xx (Vladislav Zolotarov)- bnx2x: Read FIP mac from SHMEM in single function mode (Vladislav Zolotarov)- bnx2x: Fixed ethtool -d for 578xx (Vladislav Zolotarov)- bnx2x: disable FCoE for 578xx devices since not yet supported (Dmitry Kravkov)- bnx2x: fix memory barriers (Vladislav Zolotarov)- bnx2x: use BNX2X_Q_FLG_TPA_IPV6 for TPA queue configuration (Vladislav Zolotarov)- bnx2x: disable loacal BH when scheduling FCOE napi (Vladislav Zolotarov)- bnx2x: fix MB index for 4-port devices (Dmitry Kravkov)- bnx2x: DCB rework (Dmitry Kravkov)- bnx2x: remove unnecessary dma_sync (Vladislav Zolotarov)- bnx2x: stop tx before CNIC_STOP (Vladislav Zolotarov)- bnx2x: add missing command in error handling flow (Dmitry Kravkov)- bnx2x: use correct dma_sync function (Vladislav Zolotarov)- bnx2x: Fix compilation when CNIC is not selected in config (Dmitry Kravkov)- bnx2x: Multiple concurrent l2 traffic classes (Ariel Elior)- bnx2x: Renaming the \"reset_task\" to \"sp_rtnl_task\" (Ariel Elior)- bnx2x: Add dcbnl notification (Shmulik Ravid)- dcbnl: Add CEE notification (Shmulik Ravid)- dcbnl: Aggregated CEE GET operation (Shmulik Ravid)- dcb: use nlmsg_free() instead of kfree() (Dan Carpenter)- dcb: Add missing error check in dcb_ieee_set() (John Fastabend)- dcb: fix return type on dcb_setapp() (John Fastabend)- dcb: Add dcb_ieee_getapp_mask() for drivers to query APP settings (John Fastabend)- dcb: Add ieee_dcb_delapp() and dcb op to delete app entry (Joe Jin)- dcb: Add ieee_dcb_setapp() to be used for IEEE 802.1Qaz APP data (John Fastabend)- net: dcbnl, add multicast group for DCB (John Fastabend)- dcb: Add DCBX capabilities bitmask to the get_ieee response (John Fastabend)- bnx2x: Fix warning message during 57712/8727 initialization (Yaniv Rosner)- bnx2x: Add autogrEEEn support (Yaniv Rosner)- bnx2x: Fix BCM84833 initialization (Yaniv Rosner)- bnx2x: Fix false link indication at link partner when DAC is used (Yaniv Rosner)- bnx2x: Reset PHY due to fan failure for 578xx (Yaniv Rosner)- bnx2x: Add CL37 BAM for Warpcore (Yaniv Rosner)- bnx2x: Change BCM54616S to BCM54618SE (Yaniv Rosner)- bnx2x: PFC fixes (Yaniv Rosner)- bnx2x: remove unnecessary read of PCI_CAP_ID_EXP (Jon Mason)- cnic: Update VLAN ID during ISCSI_UEVENT_PATH_UPDATE (Eddie Wai)- cnic: set error flag when iSCSI connection fails (Jeffrey Huang)- cnic: Add FCoE parity error recovery (Michael Chan)- cnic: Improve error recovery on bnx2x devices (Michael Chan)- cnic: Add timeout for ramrod replies. (Michael Chan)- cnic, bnx2fc: Increase maximum FCoE sessions. (Michael Chan)- bnx2: Update driver to use new mips firmware. (Joe Jin)- bnx2: Add missing memory barrier in bnx2_start_xmit() (Joe Jin)- bnx2: Add support for ethtool --show-channels|--set-channels (Michael Chan)- bnx2: fix skb truesize underestimation (Eric Dumazet)- bnx2: don\'t request firmware when there\'s no userspace. (françois romieu)- tg3: Avoid panic from reserved statblk field access (Matt Carlson)- tg3: Use mii_advertise_flowctrl (Matt Carlson)- tg3: Fix advertisement handling (Joe Jin)- tg3: Add 57766 ASIC rev support (Matt Carlson)- tg3: Make the TX BD DMA limit configurable (Matt Carlson)- tg3: Track LP advertising (Matt Carlson)- tg3: Integrate flowctrl check into AN adv check (Joe Jin)- net: Change mii to ethtool advertisement function names (Matt Carlson)- net: Add ethtool to mii advertisment conversion helpers (Joe Jin)- tg3: fix ipv6 header length computation (Eric Dumazet)- tg3: Break out RSS indir table init and assignment (Matt Carlson)- tg3: Update version to 3.122 (Matt Carlson)- tg3: Return flowctrl config through ethtool (Matt Carlson)- tg3: Save stats across chip resets (Matt Carlson)- tg3: Remove ethtool stats member from dev struct (Matt Carlson)- tg3: Scale back code that modifies MRRS (Matt Carlson)- tg3: Fix TSO CAP for 5704 devs w / ASF enabled (Matt Carlson)- tg3: Add MDI-X reporting (Matt Carlson)- tg3: Restrict large prod ring cap devices (Matt Carlson)- tg3: Adjust BD replenish thresholds (Matt Carlson)- tg3: Make 1000Base-X FC resolution look like 1000T (Matt Carlson)- tg3: Update version to 3.121 (Matt Carlson)- tg3: Eliminate timer race with reset_task (Matt Carlson)- tg3: Schedule at most one tg3_reset_task run (Joe Jin)- tg3: Obtain PCI function number from device (Matt Carlson)- tg3: Fix irq alloc error cleanup path (Matt Carlson)- tg3: Fix 4k skb error recovery path (Matt Carlson)- tg3: Fix 4k tx bd segmentation code (Joe Jin)- tg3: Fix APE mutex init and use (Matt Carlson)- tg3: add tx_dropped counter (Joe Jin)- tg3: fix tigon3_dma_hwbug_workaround() (Eric Dumazet)- tg3: Remove unnecessary driver assignments of ethtool_ringparam fields to zero (Joe Jin)- tg3: Code movement (Matt Carlson)- tg3: Eliminate tg3_halt_cpu() prototype (Matt Carlson)- tg3: Eliminate tg3_write_sig_post_reset() prototype (Matt Carlson)- tg3: Eliminate tg3_stop_fw() prototype (Matt Carlson)- tg3: Remove tp->rx_offset term when unneeded (Matt Carlson)- tg3: Fix missed MSI workaround (Matt Carlson)- tg3: Workaround tagged status update bug (Matt Carlson)- tg3: Add ability to turn off 1shot MSI (Matt Carlson)- tg3: Check all adv bits when checking config (Matt Carlson)- tg3: Update version to 3.120 (Matt Carlson)- tg3: Add external loopback support to selftest (Matt Carlson)- net: add external loopback test in ethtool self test (Amit Kumar Salecha)- tg3: Restructure tg3_test_loopback (Matt Carlson)- tg3: Pull phy int lpbk setup into separate func (Matt Carlson)- tg3: Consilidate MAC loopback code (Matt Carlson)- tg3: Remove dead code (Matt Carlson)- tg3: Remove 5719 jumbo frames and TSO blocks (Matt Carlson)- tg3: Break larger frags into 4k chunks for 5719 (Matt Carlson)- tg3: Add tx BD budgeting code (Matt Carlson)- tg3: Consolidate code that calls tg3_tx_set_bd() (Matt Carlson)- tg3: Add partial fragment unmapping code (Matt Carlson)- tg3: Generalize tg3_skb_error_unmap() (Matt Carlson)- tg3: Remove short DMA check for 1st fragment (Matt Carlson)- tg3: Simplify tx bd assignments (Matt Carlson)- tg3: Reintroduce tg3_tx_ring_info (Matt Carlson)- tg3: Fix NVRAM selftest failures for 5720 devs (Matt Carlson)- tg3: Add more selfboot formats to NVRAM selftest (Matt Carlson)- tg3: Return size from tg3_vpd_readblock() (Matt Carlson)- tg3: Fix RSS indirection table distribution (Matt Carlson)- tg3: Fix link down notify failure when EEE disabled (Matt Carlson)- tg3: Fix link flap at 100Mbps with EEE enabled (Matt Carlson)- tg3: Match power source to driver state (Matt Carlson)- tg3: Add function status reporting (Matt Carlson)- tg3: Create critical section around GPIO toggling (Matt Carlson)- tg3: Determine PCI function number in one place (Matt Carlson)- tg3: Check transitions to D0 power state (Matt Carlson)- tg3: Create funcs for power source switching (Matt Carlson)- tg3: Move power state transitions to init_one (Matt Carlson)- tg3: Detect APE enabled devs earlier (Matt Carlson)- tg3: remove unnecessary read of PCI_CAP_ID_EXP (Jon Mason)- tg3: Migrate phy preprocessor defs to system defs (Matt Carlson)- tg3: Show flowctrl settings through get_settings() (Matt Carlson)- tg3: Remove 4G_DMA_BNDRY_BUG flag (Matt Carlson)- tg3: Remove 40BIT_DMA_LIMIT_BUG (Matt Carlson)- [SCSI] hpsa: use find_first_zero_bit (Akinobu Mita)- [SCSI] hpsa: combine hpsa_scsi_detect and hpsa_register_scsi (Stephen M. Cameron)- [SCSI] hpsa: removed unneeded structure member max_sg_entries and fix badly named constant MAXSGENTRIES (Stephen M. Cameron)- [SCSI] hpsa: fix per device memory leak on driver unload (Stephen M. Cameron)- [SCSI] hpsa: do not sleep in atomic context in rmmod path. (Stephen M. Cameron)- [SCSI] hpsa: fix flush cache transfer length (Stephen M. Cameron)- [SCSI] hpsa: set max sectors instead of taking the default (Stephen M. Cameron)- [SCSI] hpsa: detect controller lockup (Stephen M. Cameron)- [SCSI] hpsa: remove unused busy_initializing and busy_scanning (Stephen M. Cameron)- cciss: fix flush cache transfer length (Stephen M. Cameron)- cciss: auto engage SCSI mid layer at driver load time (Stephen M. Cameron)- The Windows driver .inf disables ASPM on all cciss devices. Do the same. (Matthew Garrett)- cciss: add transport mode attribute to sys (Joe Handzik)- cciss: Adds simple mode functionality (Joseph Handzik)- [SCSI] hpsa: update device attributes when they change (Scott Teel)- [SCSI] hpsa: improve naming on external target device functions (Scott Teel)- [SCSI] hpsa: eliminate 8 external target limitation (Scott Teel)- [SCSI] hpsa: fix potential array overflow in hpsa_update_scsi_devices (Scott Teel)- [SCSI] hpsa: rename HPSA_MAX_SCSI_DEVS_PER_HBA (Scott Teel)- [SCSI] hpsa: refactor hpsa_figure_bus_target_lun (Stephen M. Cameron)- [SCSI] hpsa: make target and lun match what SCSI REPORT LUNs returns (Stephen M. Cameron)- [SCSI] hpsa: Fix problem with MSA2xxx devices (Stephen M. Cameron)- [scsi] hpsa: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler (Joe Jin)
* Tue May 29 2012 Maxim Uvarov [2.6.39-200.13.0.el5uek]- drm/i915: fix integer overflow in i915_gem_do_execbuffer() (Xi Wang) [Orabug: 14107456] {CVE-2012-2384}- drm/i915: fix integer overflow in i915_gem_execbuffer2() (Xi Wang) [Orabug: 14107445] {CVE-2012-2383}
* Thu May 24 2012 Maxim Uvarov [2.6.39-200.12.0.el5uek]- Revert \"x86, efi: Pass a minimal map to SetVirtualAddressMap()\" (Maxim Uvarov) [Orabug: 14076004]- config: turn on CONFIG_HVC_XEN_FRONTEND (Maxim Uvarov) [Orabug: 14064174]- xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness. (Konrad Rzeszutek Wilk)- xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN (Konrad Rzeszutek Wilk)- xen/hvc: Collapse error logic. (Konrad Rzeszutek Wilk)
* Fri May 18 2012 Maxim Uvarov [2.6.39-200.11.0.el5uek]- [dm] do not forward ioctls from logical volumes to the underlying device (Joe Jin) {CVE-2011-4127}- [block] fail SCSI passthrough ioctls on partition devices (Joe Jin) {CVE-2011-4127}- [block] add and use scsi_blk_cmd_ioctl (Joe Jin) [Orabug: 14056755] {CVE-2011-4127}
* Thu May 17 2012 Maxim Uvarov [2.6.39-200.10.0.el5uek]- net: ipv4: relax AF_INET check in bind() (Eric Dumazet) [Orabug: 14054411]- xen-netback: fix the number of skb slots calculation. (Adnan Misherfi)- KVM: Ensure all vcpus are consistent with in-kernel irqchip settings (Avi Kivity) {CVE-2012-1601}- kabi update whitelist for OCFS (Maxim Uvarov) [Orabug: 14055758]
* Fri May 11 2012 Maxim Uvarov [2.6.39-200.9.0.el5uek]- [SCSI] scsi_dh_rdac: Fix for unbalanced reference count (Moger, Babu) [Orabug: 14059970]- [SCSI] scsi_dh_rdac: Adding couple more vendor product ids (Moger, Babu) [Orabug: 14059970]- [SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support partitions in storage (Chandra Seetharaman) [Orabug: 14059970]- [SCSI] dh_rdac: Use WWID from C8 page instead of Subsystem id from C4 page to identify storage (Chandra Seetharaman) [Orabug: 14059970]- kernel config: turn on sxge and sxgevf drivers (Maxim Uvarov)- sxge/sxgevf: add new driver (Maxim Uvarov) [Orabug: 13444150]- be2iscsi: adding functionality to change network settings using iscsiadm (root)- be2iscsi: Adding bsg interface for be2iscsi (root)- be2iscsi: Get Initiator Name for the iSCSI_Host (root)- be2iscsi: Return async handle of unknown opcode to free list. (root)- be2iscsi: Check ASYNC PDU Handle corresponds to HDR/DATA Handle (root)- be2iscsi:Bump the driver Version (root)- be2iscsi: Update in Copyright information (root)- be2iscsi:Fix the function return values. (root)- be2iscsi:Code cleanup, removing the goto statement (root)- be2iscsi:Fix double free of MCCQ info memory. (root)- be2iscsi:Set num_cpu = 1 if pci_enable_msix fails (root)- be2iscsi:Fix typo function name mismatch (root)- be2iscsi:Freeing of WRB and SGL Handle in cleanup task (root)- be2iscsi: WRB Initialization and Failure code path change (root)- be2iscsi: Fix in the Asynchronous Code Path (root)- be2iscsi: cleanup a min_t() call (root)- qlge: driver update to v1.0.0.30 (Maxim Uvarov) [Orabug: 14045380]- netxen: driver update to v4.0.78 (Maxim Uvarov) [Orabug: 14045367]- qlcnic: driver update to v5.0.28.1 (Maxim Uvarov) [Orabug: 14055720]
* Thu May 10 2012 Maxim Uvarov [2.6.39-200.8.0.el5uek]- Revert \"xen-blkfront: set pages are FOREIGN_FRAME when sharing them\" (Konrad Rzeszutek Wilk)
* Thu May 10 2012 Maxim Uvarov [2.6.39-200.7.0.el5uek]- Revert \"x86/ioapic: Add register level checks to detect bogus io-apic entries\" (Maxim Uvarov)- qla2xxx: Updated the driver version to 8.04.00.03.39.0-k. (Giridhar Malavali)- qla2xxx: Don\'t attach driver with function. (Giridhar Malavali)- qla2xxx: Proper detection of firmware abort error code for ISP82xx. (Giridhar Malavali)- qla2xxx: Fix typo in bus-reset handler. (Andrew Vasquez)- qla2xxx: Correct link-reset regressions introduced during 83xx porting. (Andrew Vasquez)- qla2xxx: Handle device mapping changes due to device logout. (Arun Easi)- qla2xxx: Avoid invalid request queue dereference for bad response packets. (Arun Easi)- qla2xxx: Stop iteration after first failure in
*_id functions. (Arun Easi)- qla2xxx: Fix incorrect register access in qla2x00_start_iocbs(). (Arun Easi)- qla2xxx: Fix to update proper command completion upon command retries. (Andrew Vasquez)- qla2xxx: Hard code the number of loop entries at 128. (Chad Dupuis)- Revert \"qla2xxx: Return N-port id to firmware on logout.\" (Giridhar Malavali)- qla2xxx: Reference proper scsi_qla_host structure for processing non-scsi SRB commands. (Giridhar Malavali)- qla2xxx: Fix wrong decrement, null sp access. (Arun Easi)- qla2xxx: Further consolidation of SRB related code changes. (Giridhar Malavali)- qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle. (Giridhar Malavali)- qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of targets. (Chad Dupuis)- qla2xxx: Cache swl during fabric discovery. (Andrew Vasquez)- qla2xxx: Remove EDC sysfs interface. (Joe Carnuccio)- qla2xxx: Perform firmware dump procedure on mailbox command timeout. (Chad Dupuis)- qla2xxx: Change the log message when previous dump is available to retrieve for ISP82xx. (Giridhar Malavali)- qla2xxx: Log messages to use correct vha. (Arun Easi)- qla2xxx: Add new message when a new loopid is assigned. (Chad Dupuis)- qla2xxx: Fix ql_dbg arguments. (Arun Easi)- qla2xxx: Use ql_log
* #define\'s in ql_log() and ql_log_pci(). (Chad Dupuis)- qla2xxx: Convert remaining printk\'s to ql_log format. (Chad Dupuis)- qla2xxx: Print mailbox command opcode and return code when a command times out. (Chad Dupuis)- qla2xxx: Remove check for null fcport from host reset handler. (Michael Christie)- qla2xxx: Correct out of bounds read of ISP2200 mailbox registers. (Andrew Vasquez)- qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing. (Andrew Vasquez)- qla2xxx: Reduce mbx-command timeout for Login/Logout requests. (Andrew Vasquez)- qla2xxx: Clear options-flags while issuing stop-firmware mbx command. (Andrew Vasquez)- qla2xxx: Prep zero-length BSG data-transfer requests. (Andrew Vasquez)- qla2xxx: Perform implicit logout during rport tear-down. (Andrew Vasquez)- qla2xxx: Return N-port id to firmware on logout. (Joe Carnuccio)- qla2xxx: Handle failure cases during fabric_login (Chad Dupuis)- qla2xxx: Increase speed of flash access in ISP82xx adapters to improve firmware load speed. (Chad Dupuis)- qla2xxx: Handle change notifications based on switch scan results. (Arun Easi)- qla2xxx: Correct print format for edc ql_log() calls. (Joe Carnuccio)- qla2xxx: Use consistent DL mask for ELS/CT passthru requests. (Andrew Vasquez)- qla2xxx: Consolidation of SRB processing. (Giridhar Malavali)- qla2xxx: Use proper VPD/NVRAM regions with ISP8031 parts. (Andrew Vasquez)- qla2xxx: Remove ql2xfwloadbin assignment to 0. (Chad Dupuis)- qla2xxx: Call MPI reset for 81xx adapters only. (Andrew Vasquez)- qla2xxx: Driver need to do HotReset instead of FundamentalReset for ISP83XX (Andrew Vasquez)- qla2xxx: Use default semantic for firmware load. (Saurav Kashyap)- qla2xxx: Enhancements to support ISP83xx. (Giridhar Malavali)- qla2xxx: Enhanced the dump routines to capture multiple request and response queues. (Giridhar Malavali)- qla2xxx: Update the driver version to 8.03.07.13.39.0-k. (Saurav Kashyap)- qla2xxx: Fixed typos and misc issues. (Saurav Kashyap)- qla2xxx: Fix byte swapping in IPE print statement. (Chad Dupuis)- qla2xxx: Add an \"is reset active\" helper. (Andrew Vasquez)- qla2xxx: Disable generating pause frames when firmware hang detected for ISP82xx. (Giridhar Malavali)- qla2xxx: Use a valid enode-mac if none defined. (Andrew Vasquez)- qla2xxx: Remove resetting memory during device initialization for ISP82xx. (Shyam Sundar)- qla2xxx: Propagate up abort failures. (Arun Easi)- qla2xxx: Add check for null fcport references in qla2xxx_queuecommand. (Chad Dupuis)- [mpt2sas] Bump driver vesion to 13.100.00.00 (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] fix NULL pointer at ioc->pfacts (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] A hard drive is going OFFLINE when there is a hard reset issued and simultaneously another hard drive is hot unplugged (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] Set the phy identifier of the end device to to the phy number of the parent device it is linked to (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] While enabling phy, read the current port number from sas iounit page 0 instead of page 1 (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] Fix several endian issues found by runing sparse (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] Modify the source code as per the findings reported by the source code analysis tool (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] Improvement were made to better protect the sas_device, raid_device, and expander_device lists (Nagalakshmi Nandigama)- [mpt2sas] Perform Target Reset instead of HBA reset when a SATA_PASSTHROUGH cmd timeout happens (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] Added multisegment mode support for Linux BSG Driver (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] remove the global mutex (Nagalakshmi Nandigama) [Orabug: 14040678]- [mpt2sas] MPI next revision header update (Nagalakshmi Nandigama) [Orabug: 14040678]- Update lpfc version for 8.3.5.68.4p driver release (Vaios Papadimitriou)- Fix bug with mailbox handling of REG_VFI and cable pull (CR 127762) (Vaios Papadimitriou)- Use PCI configure space read to flush PCI function reset register write to avoid MMIO issues (CR 128101) (Vaios Papadimitriou)- Fixed system panic when extents enabled with large number of small blocks (CR 128010) (Vaios Papadimitriou)- Fixed the system panic during EEH recovery (CR 127062) (Vaios Papadimitriou)- Fix resource leak when acc fails for received plogi (CR 127847) (Vaios Papadimitriou)- Fixed SLI4 driver module load and unload test in a loop crashes the system (CR 126397) (Vaios Papadimitriou)- Fixed missing CVL event causing round-robin FCF failover process to stop (CR 123367) (Vaios Papadimitriou)- Fix deadlock during adapter offline request (CR 127217) (Vaios Papadimitriou)- Fix same RPI registered multiple times after HBA reset (CR 127176) (Vaios Papadimitriou)- Fix driver handling of XRI Aborted CQE response (CR 127345) (Vaios Papadimitriou)- Fixed port and system failure in handling SLI4 FC port function reset (CR 126551) (Vaios Papadimitriou)- Fix bug with driver not sending a LOGO with vport delete (CR 126625) (Vaios Papadimitriou)- Fix for SLI4 Port delivery for BLS ABORT ACC (CR 126289) (Vaios Papadimitriou)- Fix ndlp nodelist not empty wait timeout during driver unloading (CR 127052) (Vaios Papadimitriou)- Fix mailbox and vpi memory leaks (CR 126818) (Vaios Papadimitriou)- Fix management communication issues by creating character device to take a reference on the driver (CR 126082) (Vaios Papadimitriou)- Fix for FDISC failures after firmware reset or link bounce (CR 126779) (Vaios Papadimitriou)- Fix for driver using duplicate RPIs after LPe16000 port reset (CR 126723) (Vaios Papadimitriou)- Fix discovery problem when in pt2pt (CR 126887) (Vaios Papadimitriou)- Fixed failure in handling large CQ/EQ identifiers in an IOV environment (CR 126856) (Vaios Papadimitriou)- Fix Locking code raising IRQ twice (Vaios Papadimitriou)- Fix driver not returning when bad ndlp found in abts error event handling (CR 126209) (Vaios Papadimitriou)- Fix bug with driver returning the wrong ndlp (CR 125743) (Vaios Papadimitriou)- Fix driver behavior when receiving an ADISC (CR 126654) (Vaios Papadimitriou)- Fix bug with driver processing dump command type 4 using 16Gb FC Adapter (CR 126406) (Vaios Papadimitriou)- Fix driver does not reset port when reset is needed during fw_dump (CR 125807) (Vaios Papadimitriou)- Fix ELS FDISC failing with local reject / invalid RPI (CR 126350) (Vaios Papadimitriou)- Fix SLI4 FC port internal loopback (CR 126409) (Vaios Papadimitriou)- Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (CR 126230) (Vaios Papadimitriou)- Fix bug with driver processing an els command using 16Gb FC Adapter (CR 126345) (Vaios Papadimitriou)- Fix NMI seen due to CQE starvation (CR 126149) (Vaios Papadimitriou)- Fixed SLI4 FC port obtained link type and number dependent on link connection (CR 126264) (Vaios Papadimitriou)- Fixed SLI4 FC port internal loopback without SFP and external link/loopback plug (CR 125843) (Vaios Papadimitriou)- Fix driver incorrectly building fcpCdb during scsi command prep (CR 126209) (Vaios Papadimitriou)- be2net: make be_vlan_add_vid() void (Maxim Uvarov)- be2net: Record receive queue index in skb to aid RPS. (Somnath Kotur)- be2net: Fix FW download for BE (Padmanabh Ratnakar)- be2net: Fix traffic stall INTx mode (Padmanabh Ratnakar)- be2net: fix ethtool get settings (Ajit Khaparde)- be2net: fix programming of VLAN tags for VF (Ajit Khaparde)- be2net: reset queue address after freeing (Sathya Perla)- be2net: fix tx completion cleanup (Sathya Perla)- be2net: refactor/cleanup vf configuration code (Maxim Uvarov)- be2net: event queue re-design (Maxim Uvarov)- be2net: update the driver version (Sarveshwar Bandi)- be2net: Fix EEH error reset before a flash dump completes (Somnath Kotur)- be2net: Ignore status of some ioctls during driver load (Ajit Khaparde)- be2net: Fix wrong status getting returned for MCC commands (Padmanabh Ratnakar)- be2net: Fix Lancer statistics (Padmanabh Ratnakar)- be2net: Fix ethtool self test for Lancer (Padmanabh Ratnakar)- be2net: Fix FW download in Lancer (Padmanabh Ratnakar)- be2net: Fix VLAN/multicast packet reception (Padmanabh Ratnakar)- be2net: Fix number of vlan slots in flex mode (Ajit Khaparde)- be2net: enable WOL by default if h/w supports it (Ajit Khaparde)- be2net: Remove unused OFFSET_IN_PAGE() macro (Roland Dreier)- be2net: enable RSS for ipv6 pkts (Sathya Perla)- be2net: Use new implementation of get mac list command (Padmanabh Ratnakar)- be2net: Fix link status query command (Padmanabh Ratnakar)- ethtool: Null-terminate filename passed to ethtool_ops::flash_device (Ben Hutchings)- be2net: add descriptions for stat counters reported via ethtool (Sathya Perla)- be2net: allocate more headroom in incoming skbs (Eric Dumazet)- netdev: make net_device_ops const (stephen hemminger)- be2net: fix be_vlan_add/rem_vid (Ajit Khaparde)- be2net: Fix INTx processing for Lancer (Padmanabh Ratnakar)- be2net: Add support for Skyhawk cards (Ajit Khaparde)- be2net: fix ethtool ringparam reporting (Sathya Perla)- be2net: workaround to fix a bug in BE (Ajit Khaparde)- be2net: update some counters to display via ethtool (Ajit Khaparde)- net: make vlan ndo_vlan_rx_[add/kill]_vid return error value (Jiri Pirko)- be2net: netpoll support (Ivan Vecera)- xen/pci: don\'t use PCI BIOS service for configuration space accesses (David Vrabel)- xen/Kconfig: fix Kconfig layout (Andrew Morton)- xen/pte: Fix crashes when trying to see non-existent PGD/PMD/PUD/PTEs (Konrad Rzeszutek Wilk)- xen/apic: Return the APIC ID (and version) for CPU 0. (Konrad Rzeszutek Wilk)- drivers/video/xen-fbfront.c: add missing cleanup code (Julia Lawall)- xen/x86: Workaround \'x86/ioapic: Add register level checks to detect bogus io-apic entries\' (Konrad Rzeszutek Wilk)- xen/acpi: Workaround broken BIOSes exporting non-existing C-states. (Konrad Rzeszutek Wilk)- xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won\'t be loaded. (Konrad Rzeszutek Wilk)- drivers/video/xen-fbfront.c: add missing cleanup code (Julia Lawall)- xen: correctly check for pending events when restoring irq flags (David Vrabel)- xen/smp: Fix crash when booting with ACPI hotplug CPUs. (Konrad Rzeszutek Wilk)- xen: use the pirq number to check the pirq_eoi_map (Stefano Stabellini)
* Sat May 05 2012 Maxim Uvarov [2.6.39-200.6.0.el5uek]- [USB] cdc-acm: Increase number of devices to 64 (Joe Jin) [Orabug: 13693812]- git-changelog: generate date entry (Maxim Uvarov)- [scsi] hpsa: Remove some PCI IDs if for OL5. (Joe Jin)- [block] cciss: fix incorrect PCI IDs and add two new ones (Joe Jin)- [scsi] hpsa: add some older controllers to the kdump blacklist (Joe Jin)- [block] cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler (Joe Jin)- [block] cciss: add some older controllers to the kdump blacklist (Joe Jin)
* Wed May 02 2012 Maxim Uvarov [2.6.39-200.5.0.el5uek]- be2net: query link status in be_open() (Sarveshwar Bandi) [Orabug: 13231]
* Thu Apr 26 2012 Maxim Uvarov [2.6.39-200.4.0.el5uek]- Revert \"xen/p2m: m2p_find_override: use list_for_each_entry_safe\" (Konrad Rzeszutek Wilk)- xen/blkback: Fix warning error. (Konrad Rzeszutek Wilk)- xen/blkback: Make optional features be really optional. (Konrad Rzeszutek Wilk)- xen-blkfront: module exit handling adjustments (Jan Beulich)- xen-blkfront: properly name all devices (Jan Beulich)- xen-blkfront: set pages are FOREIGN_FRAME when sharing them (Stefano Stabellini)- xen: EXPORT_SYMBOL set_phys_to_machine (Stefano Stabellini)- xen-blkfront: make blkif_io_lock spinlock per-device (Steven Noonan)- xen/blkfront: don\'t put bdev right after getting it (Andrew Jones)- xen-blkfront: use bitmap_set() and bitmap_clear() (Akinobu Mita)- xen/blkback: Enable blkback on HVM guests (Daniel De Graaf)- xen/blkback: use grant-table.c hypercall wrappers (Daniel De Graaf)- xen/p2m: m2p_find_override: use list_for_each_entry_safe (Stefano Stabellini)- xen/gntdev: do not set VM_PFNMAP (Stefano Stabellini)- xen/grant-table: add error-handling code on failure of gnttab_resume (Julia Lawall)- xen: only check xen_platform_pci_unplug if hvm (Igor Mammedov)- xen: initialize platform-pci even if xen_emul_unplug=never (Igor Mammedov)- xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps (Andrew Jones)- xen: support pirq_eoi_map (Stefano Stabellini)- xen/smp: Remove unnecessary call to smp_processor_id() (Srivatsa S. Bhat)- xen/smp: Fix bringup bug in AP code. (Konrad Rzeszutek Wilk)- xen/tmem: cleanup (Jan Beulich)- xen: constify all instances of \"struct attribute_group\" (Jan Beulich)- xen/xenbus: ignore console/0 (Stefano Stabellini)- hvc_xen: introduce HVC_XEN_FRONTEND (Stefano Stabellini)- hvc_xen: implement multiconsole support (Stefano Stabellini)- hvc_xen: support PV on HVM consoles (Stefano Stabellini)- xen: use this_cpu_xxx replace percpu_xxx funcs (Alex Shi)- xenbus: don\'t free other end details too early (Jan Beulich)- xen/resume: Fix compile warnings. (Konrad Rzeszutek Wilk)- xen/xenbus: Add quirk to deal with misconfigured backends. (Konrad Rzeszutek Wilk)- xenbus: address compiler warnings (Jan Beulich)- xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success (Jan Beulich)- xen/pciback: fix XEN_PCI_OP_enable_msix result (Jan Beulich)- xen/pciback: Support pci_reset_function, aka FLR or D3 support. (Konrad Rzeszutek Wilk)- PCI: Introduce __pci_reset_function_locked to be used when holding device_lock. (Konrad Rzeszutek Wilk)- xen/acpi: Fix Kconfig dependency on CPU_FREQ (Konrad Rzeszutek Wilk)- xen/acpi-processor: Do not depend on CPU frequency scaling drivers. (Konrad Rzeszutek Wilk)- xen/cpufreq: Disable the cpu frequency scaling drivers from loading. (Konrad Rzeszutek Wilk)- provide disable_cpufreq() function to disable the API. (Konrad Rzeszutek Wilk)- xen-netback: make ops structs const (stephen hemminger)- netback: fix typo in comment (Wei Liu)- netback: remove redundant assignment (Wei Liu)- netback: Fix alert message. (Wei Liu)- xen-netback: use correct index for invalidation in xen_netbk_tx_check_gop() (Jan Beulich)- net: xen-netback: correctly restart Tx after a VM restore/migrate (David Vrabel)- xen/netback: Add module alias for autoloading (Bastian Blank)
* Thu Apr 26 2012 Maxim Uvarov [2.6.39-200.3.0.el5uek]- loop: loop_thread needs to set the PF_LESS_THROTTLE flag (Dave Kleikamp)- iov_iter: missing assignment of ii_bvec_ops.ii_shorten (Dave Kleikamp)
* Fri Apr 20 2012 Maxim Uvarov [2.6.39-200.2.0.el5uek]- regset: Return -EFAULT, not -EIO, on host-side memory fault (H. Peter Anvin) {CVE-2012-1097}- regset: Prevent null pointer reference on readonly regsets (H. Peter Anvin) {CVE-2012-1097}- cifs: fix dentry refcount leak when opening a FIFO on lookup (Jeff Layton) {CVE-2012-1090}- git-changelog: add brackets around cve (Maxim Uvarov)- git-changelog: parse Oracle bug (Maxim Uvarov)- NFSv4: Save the owner/group name string when doing open (Trond Myklebust) [Oracle bug: 13842440 (from 13459986)]- ext4: flush any pending end_io requests before DIO reads w/dioread_nolock (Jiaying Zhang)- NFSv4: Return the delegation if the server returns NFS4ERR_OPENMODE (Trond Myklebust)- NFS: Properly handle the case where the delegation is revoked (Trond Myklebust)- nfsd: don\'t allow zero length strings in cache_parse() (Dan Carpenter)- x86, tls: Off by one limit check (Dan Carpenter)- x86, tsc: Skip refined tsc calibration on systems with reliable TSC (Alok Kataria)- lockd: fix arg parsing for grace_period and timeout. (NeilBrown)- xfrm: Access the replay notify functions via the registered callbacks (Steffen Klassert)- Remove printk from rds_sendmsg (Dave Jones)- net: fix napi_reuse_skb() skb reserve (Eric Dumazet)- net: fix a potential rcu_read_lock() imbalance in rt6_fill_node() (Eric Dumazet)- Fix pppol2tp getsockname() (Benjamin LaHaise)- slub: Do not hold slub_lock when calling sysfs_slab_add() (Christoph Lameter)- xfs: Fix oops on IO error during xlog_recover_process_iunlinks() (Jan Kara)- dm exception store: fix init error path (Andrei Warkentin)- dm crypt: add missing error handling (Mikulas Patocka)- dm crypt: fix mempool deadlock (Mikulas Patocka)- vfs: fix d_ancestor() case in d_materialize_unique (Michel Lespinasse)- udf: Fix deadlock in udf_release_file() (Jan Kara)- ext4: check for zero length extent (Theodore Ts\'o)- ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc (Lukas Czerner)- jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer (Eric Sandeen)- e1000e: Avoid wrong check on TX hang (Jeff Kirsher)- hwmon: (fam15h_power) Correct sign extension of running_avg_capture (Andreas Herrmann)- proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate(). (Pravin B Shelar)- x86-32: Fix endless loop when processing signals for kernel tasks (Dmitry Adamushko)- usbnet: don\'t clear urb->dev in tx_complete (tom.leiming)- SUNRPC: We must not use list_for_each_entry_safe() in rpc_wake_up() (Trond Myklebust)- cifs: fix issue mounting of DFS ROOT when redirecting from one domain controller to the next (Jeff Layton)- xfs: fix inode lookup race (Dave Chinner)- firewire: ohci: fix too-early completion of IR multichannel buffers (Clemens Ladisch)- pata_legacy: correctly mask recovery field for HT6560B (Sergei Shtylyov)- target: Fix 16-bit target ports for SET TARGET PORT GROUPS emulation (Roland Dreier)- target: Don\'t set WBUS16 or SYNC bits in INQUIRY response (Roland Dreier)- md/raid1,raid10: avoid deadlock during resync/recovery. (NeilBrown)- md/bitmap: ensure to load bitmap when creating via sysfs. (NeilBrown)- tcm_fc: Fix fc_exch memory leak in ft_send_resp_status (Nicholas Bellinger)- hugetlbfs: avoid taking i_mutex from hugetlbfs_read() (Aneesh Kumar K.V)- bootmem/sparsemem: remove limit constraint in alloc_bootmem_section (Nishanth Aravamudan)- mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode (Andrea Arcangeli) {CVE-2012-1179}- x86/ioapic: Add register level checks to detect bogus io-apic entries (Suresh Siddha)- rtc: Disable the alarm in the hardware (v2) (Rabin Vincent)- genirq: Fix incorrect check for forced IRQ thread handler (Alexander Gordeev)- genirq: Fix long-term regression in genirq irq_set_irq_type() handling (Russell King)- uevent: send events in correct order according to seqnum (v3) (Andrew Vagin)- ntp: Fix integer overflow when setting time (Sasha Levin)- math: Introduce div64_long (Sasha Levin)- sysfs: Fix memory leak in sysfs_sd_setsecdata(). (Masami Ichikawa)- futex: Cover all PI opcodes with cmpxchg enabled check (Thomas Gleixner)- usb: musb: Reselect index reg in interrupt context (Supriya Karanth)- USB: ftdi_sio: fix problem when the manufacture is a NULL string (Greg Kroah- Hartman)
* Fri Apr 13 2012 Maxim Uvarov [2.6.39-200.0.15.el5uek]- directio: account for extra page IOs for unaligned request (Dave Kleikamp) [Orabug: 13916031]
* Sat Apr 07 2012 Maxim Uvarov [2.6.39-200.0.14.el5uek]- update kabi (Maxim Uvarov)- adjust kernel configs (Maxim Uvarov)- usb: fix number of mapped SG DMA entries (Clemens Ladisch)- svcrpc: destroy server sockets all at once (J. Bruce Fields)- PCI: Rework ASPM disable code (Matthew Garrett)- net: fix NULL dereferences in check_peer_redir() (Eric Dumazet)- lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel (Wu Fengguang)- writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue (Wu Fengguang)- net: Make qdisc_skb_cb upper size bound explicit. (David S. Miller)- ipv4: Save nexthop address of LSRR/SSRR option to IPCB. (Maxim Uvarov)- compat: use sys_sendfile64() implementation for sendfile syscall (Chris Metcalf)- ext4: implement ext4_file_write_iter (Dave Kleikamp)
* Tue Apr 03 2012 Maxim Uvarov [2.6.39-200.0.13.el5uek]- fix git merge: vlan: allow nested vlan_do_receive() (Maxim Uvarov)- SPEC: update and turn on kabi (Maxim Uvarov)
* Tue Apr 03 2012 Maxim Uvarov [2.6.39-200.0.12.el5uek]- remove unused mutex hpidebuglock (Maxim Uvarov)- add hxge-1.3.3 driver (Maxim Uvarov)
* Sat Mar 31 2012 Maxim Uvarov [2.6.39-200.0.11.el5uek]- vlan: allow nested vlan_do_receive() (Maxim Uvarov)- net: allow vlan traffic to be received under bond (John Fastabend)- net: vlan: goto another_round instead of calling __netif_receive_skb (Jiri Pirko)
* Fri Mar 30 2012 Maxim Uvarov [2.6.39-200.0.10.el5uek]- ocfs2/cluster: Fix output in file elapsed_time_in_ms (Sunil Mushran)
* Fri Mar 30 2012 Maxim Uvarov [2.6.39-200.0.9.el5uek]- Revert \"loop: increase default number of loop devices to 512\" (Maxim Uvarov)- Revert \"loop: set default number of loop devices to 200\" (Maxim Uvarov)- ocfs2/dlm: dlmlock_remote() needs to account for remastery (Sunil Mushran)- ocfs2/dlm: Take inflight reference count for remotely mastered resources too (Maxim Uvarov)- ocfs2/dlm: Clean up refmap helpers (Maxim Uvarov)- ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery() (Sunil Mushran)- ocfs2/dlm: Cleanup up dlm_finish_local_lockres_recovery() (Sunil Mushran)- ocfs2/dlm: Trace insert/remove of resource to/from hash (Sunil Mushran)- ocfs2/dlm: Clean up messages in o2dlm (Sunil Mushran)- ocfs2/cluster: Cluster up now includes network connections too (Sunil Mushran)- ocfs2/cluster: Clean up messages in o2net (Sunil Mushran)- ocfs2/cluster: Abort heartbeat start on hard-ro devices (Sunil Mushran)
* Wed Mar 28 2012 Maxim Uvarov [2.6.39-200.0.8.el5uek]- loop: set default number of loop devices to 200 (Maxim Uvarov)- SPEC OL5: fix xen support (Maxim Uvarov)
* Thu Mar 22 2012 Maxim Uvarov [2.6.39-200.0.6.el5uek]- ocfs2: Rollback commit ea455f8ab68338ba69f5d3362b342c115bea8e13 (Sunil Mushran) [orabug: 13555276]- ocfs2: Rollback commit f7b1aa69be138ad9d7d3f31fa56f4c9407f56b6a (Sunil Mushran) [orabug: 13555276]- ocfs2: Rollback commit 5fd131893793567c361ae64cbeb28a2a753bbe35 (Sunil Mushran) [orabug: 13555276]- ocfs2/cluster: Fix o2net_fill_node_map() (Sunil Mushran)- ocfs2/cluster: Add new function o2net_fill_node_map() (Sunil Mushran)- ocfs2: Tighten free bit calculation in the global bitmap (Sunil Mushran)- ocfs2/trivial: Limit unaligned aio+dio write messages to once per day (Sunil Mushran)- btrfs: btrfs_direct_IO_bvec() needs to check for sector alignment (Dave Kleikamp)- loop: increase default number of loop devices to 512 (Dave Kleikamp)- xen/merge error: Re-introduce xen-platform-pci driver. (Konrad Rzeszutek Wilk)- x86/PCI: reduce severity of host bridge window conflict warnings (Bjorn Helgaas)- xen/acpi: Remove the WARN\'s as they just create noise. (Konrad Rzeszutek Wilk)
* Wed Mar 21 2012 Maxim Uvarov [2.6.39-200.0.5.el5uek]- btrfs: create btrfs_file_write_iter() (Dave Kleikamp)
* Wed Mar 21 2012 Maxim Uvarov [2.6.39-200.0.4.el5uek]- ocfs2/trivial: Print message indicating unaligned aio+dio write (Sunil Mushran)- ocfs2: Avoid livelock in ocfs2_readpage() (Jan Kara)- ocfs2: serialize unaligned aio (Mark Fasheh)- ocfs2: null deref on allocation error (Dan Carpenter)- ocfs2: Bugfix for hard readonly mount (Tiger Yang)
* Mon Mar 19 2012 Guru Anbalagane [2.6.39-200.0.3.el5uek]- xen/blkback: Disable DISCARD support for loopback device (but leave for phy). (Konrad Rzeszutek Wilk)- block: fix patch import error in max_discard_sectors check (Jens Axboe)- block: eliminate potential for infinite loop in blkdev_issue_discard (Mike Snitzer)- config: Use the xen-acpi-processor instead of the cpufreq-xen driver. (Konrad Rzeszutek Wilk)- xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. (Konrad Rzeszutek Wilk)- Revert \"Merge branch \'stable/cpufreq-xen.v6.rebased\' into uek2-merge\" (Konrad Rzeszutek Wilk)
* Wed Mar 14 2012 Guru Anbalagane [2.6.39-200.0.2.el5uek]- xen: make page table walk hugepages aware (Dave McCracken) [Orabug: 13719997]- x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems (Narendra_K)
* Sun Mar 11 2012 Guru Anbalagane [2.6.39-200.0.1.el5uek]- disable kabicheck for uek2 update 1 beta- nfs: only dirty user pages in direct read code (Dave Kleikamp)- config: Enable Xen\'s PV USB, SCSI, MCE and Xen CPU freq driver (Konrad Rzeszutek Wilk)- [CPUFREQ] xen: governor for Xen hypervisor frequency scaling. (Konrad Rzeszutek Wilk)- xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. (Konrad Rzeszutek Wilk)- Revert \"Merge branch \'stable/processor-passthru.v5.rebased\' into uek2-merge\" (Konrad Rzeszutek Wilk)- xen/processor-passthru: threads aren\'t suppose to leave on their own. (Konrad Rzeszutek Wilk)- config: Enable Xen\'s PV USB, SCSI, MCE and Processor-Passthru (Konrad Rzeszutek Wilk)- Xen: Export host physical CPU information to dom0 (Liu Jinsong)- xen/mce: Change the machine check point (Liu Jinsong)- Add mcelog support from xen platform (Liu Jinsong)- usb: xen pvusb driver (Nathanael Rensen)- xen/processor-passthru: Provide an driver that passes struct acpi_processor data to the hypervisor. (Konrad Rzeszutek Wilk)- xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. (Konrad Rzeszutek Wilk)- xen/setup/pm/acpi: Remove the call to boot_option_idle_override. (Konrad Rzeszutek Wilk)- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)- xen/pm_idle: Make pm_idle be default_idle under Xen. (Konrad Rzeszutek Wilk)- cpuidle: stop depending on pm_idle (Len Brown)- cpuidle: replace xen access to x86 pm_idle and default_idle (Len Brown)- cpuidle: create bootparam \"cpuidle.off=1\" (Len Brown)- Revert \"Merge branch \'stable/acpi-cpufreq.v3.rebased\' into uek2-merge\" (Konrad Rzeszutek Wilk)- x86/microcode: check proper return code. (Ben Guthro)- xen: add CPU microcode update driver (Jeremy Fitzhardinge)- xen: add dom0_op hypercall (Jeremy Fitzhardinge)- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)- nfs: add support for read_iter, write_iter (Dave Kleikamp)- xenbus_dev: add missing error check to watch handling (Jan Beulich)- xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn. (Konrad Rzeszutek Wilk)- xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback (Stefano Stabellini)- xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic. (Konrad Rzeszutek Wilk)- xen/bootup: During bootup suppress XENBUS: Unable to read cpu state (Konrad Rzeszutek Wilk)- Merge conflict resolved. Somehow the letter \'s\' slipped in the Makefile. This fixes the compile issues. (Konrad Rzeszutek Wilk)- xen/events: BUG() when we can\'t allocate our event->irq array. (Konrad Rzeszutek Wilk)- xen/granttable: Disable grant v2 for HVM domains. (Konrad Rzeszutek Wilk)- xen-blkfront: Use kcalloc instead of kzalloc to allocate array (Thomas Meyer)- xen/pciback: Expand the warning message to include domain id. (Konrad Rzeszutek Wilk)- xen/pciback: Fix \"device has been assigned to X domain!\" warning (Konrad Rzeszutek Wilk)- xen/xenbus: don\'t reimplement kvasprintf via a fixed size buffer (Ian Campbell)- xenbus: maximum buffer size is XENSTORE_PAYLOAD_MAX (Ian Campbell)- xen/xenbus: Reject replies with payload > XENSTORE_PAYLOAD_MAX. (Ian Campbell)- Xen: consolidate and simplify struct xenbus_driver instantiation (Jan Beulich)- xen-gntalloc: introduce missing kfree (Julia Lawall)- xen/xenbus: Fix compile error - missing header for xen_initial_domain() (Konrad Rzeszutek Wilk)- xen/netback: Enable netback on HVM guests (Daniel De Graaf)- xen/grant-table: Support mappings required by blkback (Daniel De Graaf)- xenbus: Use grant-table wrapper functions (Daniel De Graaf)- xenbus: Support HVM backends (Daniel De Graaf)- xen/xenbus-frontend: Fix compile error with randconfig (Konrad Rzeszutek Wilk)- xen/xenbus-frontend: Make error message more clear (Bastian Blank)- xen/privcmd: Remove unused support for arch specific privcmp mmap (Bastian Blank)- xen: Add xenbus_backend device (Bastian Blank)- xen: Add xenbus device driver (Bastian Blank)- xen: Add privcmd device driver (Bastian Blank)- xen/gntalloc: fix reference counts on multi-page mappings (Daniel De Graaf)- xen/gntalloc: release grant references on page free (Daniel De Graaf)- xen/events: prevent calling evtchn_get on invalid channels (Daniel De Graaf)- xen/granttable: Support transitive grants (Annie Li)- xen/granttable: Support sub-page grants (Annie Li)- xen/granttable: Improve comments for function pointers (Annie Li)- xen/ia64: fix build breakage because of conflicting u64 guest handles (Tony Luck)- xen/granttable: Keep code format clean (Annie Li)- xen/granttable: Grant tables V2 implementation (Annie Li)- xen/granttable: Refactor some code (Annie Li)- xen/granttable: Introducing grant table V2 stucture (Annie Li)- Xen: update MAINTAINER info (Jeremy Fitzhardinge)- xen/event: Add reference counting to event channels (Daniel De Graaf)- xen/gnt{dev,alloc}: reserve event channels for notify (Daniel De Graaf)- xen/gntalloc: Change gref_lock to a mutex (Daniel De Graaf)- xen: document backend sysfs files (David Vrabel)- xen: document balloon driver sysfs files (David Vrabel)- btrfs: add support for read_iter, write_iter, and direct_IO_bvec (Dave Kleikamp)- ext4: add support for read_iter, write_iter, and direct_IO_bvec (Dave Kleikamp)- ocfs2: add support for read_iter, write_iter, and direct_IO_bvec (Dave Kleikamp)- ext3: add support for .read_iter and .write_iter (Dave Kleikamp)- bio: add bvec_length(), like iov_length() (Dave Kleikamp)- aio: add aio support for iov_iter arguments (Zach Brown)- aio: add aio_kernel_() interface (Dave Kleikamp)- fs: pull iov_iter use higher up the stack (Dave Kleikamp)- dio: add __blockdev_direct_IO_bdev() (Dave Kleikamp)- dio: add dio_post_submission() helper function (Dave Kleikamp)- dio: add dio_lock_and_flush() helper (Dave Kleikamp)- dio: add sdio_init() helper function (Dave Kleikamp)- dio: add dio_alloc_init() helper function (Dave Kleikamp)- dio: create a dio_aligned() helper function (Zach Brown)- iov_iter: let callers extract iovecs and bio_vecs (Zach Brown)- iov_iter: add a shorten call (Zach Brown)- iov_iter: add bvec support (Zach Brown)- iov_iter: hide iovec details behind ops function pointers (Zach Brown)- fuse: convert fuse to use iov_iter_copy_[to|from]_user (Dave Kleikamp)- iov_iter: add copy_to_user support (Zach Brown)- iov_iter: move into its own file (Zach Brown)- xen/scsi[front|back]: consolidate and simplify struct xenbus_driver instantiation (Konrad Rzeszutek Wilk)- xen/scsiback: allow RESERVE/RELEASE commands (James Harper)- xen/scsiback: vscsi >2TB patch (Samuel Kvasnica)- xen-scsi[front|back]: Fix warnings and bugs. (Konrad Rzeszutek Wilk)- xen/scsi[front|back]: Forgot .owner attribute. (Konrad Rzeszutek Wilk)- xen/scsi[front|back]: Initial commit from Novell SLES11SP1 2.6.32 tree. (Konrad Rzeszutek Wilk)- xen/pci:use hypercall PHYSDEVOP_restore_msi_ext to restore MSI/MSI-X vectors (Liang Tang)- xen/acpi/sleep: Register to the acpi_suspend_lowlevel a callback. (Konrad Rzeszutek Wilk)- xen/acpi/sleep: Enable ACPI sleep via the __acpi_override_sleep (Konrad Rzeszutek Wilk)- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)- xen: Utilize the restore_msi_irqs hook. (Konrad Rzeszutek Wilk)- x86/acpi/sleep: Provide registration for acpi_suspend_lowlevel. (Liang Tang)- x86, acpi, tboot: Have a ACPI sleep override instead of calling tboot_sleep. (Konrad Rzeszutek Wilk)- x86: Expand the x86_msi_ops to have a restore MSIs. (Konrad Rzeszutek Wilk)
* Tue Mar 06 2012 Guru Anbalagane [2.6.39-100.5.1.el5uek]- proc: make sure mem_open() doesn\'t pin the target\'s memory (Oleg Nesterov) - proc: mem_release() should check mm != NULL (Oleg Nesterov) [orabug 13811116]- proc: unify mem_read() and mem_write() (Oleg Nesterov)
* Thu Mar 01 2012 Guru Anbalagane [2.6.39-100.4.1.el5uek]- sysfs: restore upstream sysfs code (Guru Anbalagane)- rpm: remove symlink on uninstall (Maxim Uvarov) [Orabug: 13791936]- Btrfs: fix casting error in scrub reada code (Chris Mason)
* Wed Feb 22 2012 Guru Anbalagane [2.6.39-100.3.1.el5uek]- Btrfs: clear the extent uptodate bits during parent transid failures (Chris Mason)- Btrfs: add extra sanity checks on the path names in btrfs_mksubvol (Chris Mason)- Btrfs: make sure we update latest_bdev (Chris Mason)- Btrfs: improve error handling for btrfs_insert_dir_item callers (Chris Mason)- fnic: return zero on fnic_reset() success (Joe Jin)- [SCSI] libfc: improve flogi retries to avoid lport stuck (Vasu Dev)- [SCSI] libfc: avoid exchanges collision during lport reset (Vasu Dev)- igbvf: update version number (Williams, Mitch A)
* Tue Feb 14 2012 Guru Anbalagane [2.6.39-100.2.1.el5uek]- config: enable dm-nfs (Guru Anbalagane)- Update lpfc version for 8.3.5.58.2p driver release (Chuck Anderson)- Fix build warning with uninitialized variable (Chuck Anderson)- Fix warning on i386 system (CR 123966) (Chuck Anderson)- Fix mailbox and vpi memory leaks causing crashes (CR 126818) (Chuck Anderson)- Fixed unbounded firmware revision string from port caused the system panic (CR 126560) (Chuck Anderson)
* Tue Feb 07 2012 Guru Anbalagane [2.6.39-100.1.1.el5uek]- mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration (Mel Gorman)- block: Disable autoprotect (Martin K. Petersen)- enic: do vlan cleanup (Jiri Pirko)- enic: Add support to configure hardware interrupt coalesce timers in a platform independent way (Vasanthy Kolluri)- enic: Partial: Bug Fix: Fix hardware transmit queue indexing in enic_poll_controller (Vasanthy Kolluri)- enic: Get/Set interrupt resource index for transmit and receive queues (Vasanthy Kolluri)- enic: Log device configuration in detail during driver load (Vasanthy Kolluri)- enic: Pass 802.1p bits for packets tagged with vlan zero (Vasanthy Kolluri)- enic: update to support 64 bit stats (stephen hemminger)- enic: Add support for MTU change via port profile on a dynamic vnic (Roopa Prabhu)- drivers/net: Remove unnecessary semicolons (Joe Perches)- [SCSI] megaraid_sas Version to 5.40-rc1 and Changelog update (Adam Radford)- [SCSI] megaraid_sas: Add .change_queue_depth support (Adam Radford)- [SCSI] megaraid_sas: Fix FastPath I/O to work on degraded raid 1 (Adam Radford)- bnx2x: add missing break in bnx2x_dcbnl_get_cap (Shmulik Ravid)- bnx2x: fix hw attention handling (Dmitry Kravkov)- bnx2x: prevent flooded warnning kernel info (Joe Jin)- Btrfs: don\'t reserve data with extents locked in btrfs_fallocate (Chris Mason)- watchdog: hpwdt: prevent multiple \"NMI occurred\" messages (Naga Chumbalkar)- watchdog: hpwdt: add next gen HP servers (Thomas Mingarelli)- bnx2fc: Update copyright and bump version to 1.0.4 (Bhanu Prakash Gollapudi)- bnx2fc: Tx BDs cache in write tasks (Bhanu Prakash Gollapudi)- bnx2fc: Do not arm CQ when there are no CQEs (Bhanu Prakash Gollapudi)- bnx2fc: hold tgt lock when calling cmd_release (Bhanu Prakash Gollapudi)- bnx2fc: Enable support for sequence level error recovery (Bhanu Prakash Gollapudi)- bnx2fc: HSI changes for tape (Bhanu Prakash Gollapudi)- bnx2fc: Handle REC_TOV error code from firmware (Bhanu Prakash Gollapudi)- bnx2fc: REC/SRR link service request and response handling (Bhanu Prakash Gollapudi)- bnx2fc: Support \'sequence cleanup\' task (Bhanu Prakash Gollapudi)- bnx2fc: Enable REC & CONF support for the session (Bhanu Prakash Gollapudi)- bnx2fc: Introduce interface structure for each vlan interface (Bhanu Prakash Gollapudi)- bnx2fc: Replace printks with KERN_ALERT to KERN_ERR/KERN_INFO (Bhanu Prakash Gollapudi)- cnic: Add VLAN ID as a parameter during netevent upcall (Michael Chan)- bnx2i: Updated copyright and bump version (Eddie Wai)- bnx2i: Modified to skip CNIC registration if iSCSI is not supported (Eddie Wai)- bnx2i: Added the use of kthreads to handle SCSI cmd completion (Eddie Wai)- iscsi: Use struct scsi_lun in iscsi structs instead of u8[8] (Andy Grover)- cnic: Wait for all Context IDs to be deleted before sending FCOE_DESTROY_FUNC (Michael Chan)- cnic: Fix Context ID space calculation (Michael Chan)- bnx2x: Implementation for netdev->ndo_fcoe_get_wwn (Vladislav Zolotarov)- bnx2: Fix endian swapping on firmware version string (Michael Chan)- bnx2: Close device if tx_timeout reset fails (Michael Chan)- bnx2: Read iSCSI config from shared memory during ->probe() (Michael Chan)- bnx2: Add MCP dump (Jeffrey Huang)- bnx2: remove unnecessary read of PCI_CAP_ID_EXP (Jon Mason)- cnic: Return proper error code if we fail to send netlink message (Michael Chan)- cnic: Fix ring setup/shutdown code (Michael Chan)- cnic: Fix port_mode setting (Michael Chan)- cnic: Replace get_random_bytes() with random32() (Michael Chan)- cnic, bnx2i: Add support for new devices - 57800, 57810, and 57840 (Michael Chan)- drivers/net: Remove casts of void
* (Joe Perches)- bnx2fc: Fix kernel panic when deleting NPIV ports (Bhanu Prakash Gollapudi)- bnx2fc: scsi_dma_unmap() not invoked on IO completions (Bhanu Prakash Gollapudi)- bnx2fc: host stats show the link speed \'unknown\' on NIC partitioned interfaces (Bhanu Prakash Gollapudi)- bnx2x: Update date to 2011/06/13 and version to 1.70.00-0 (Vladislav Zolotarov)- bnx2x: PFC support for 578xx (Dmitry Kravkov)- bnx2x: Rename LASI registers to definitions in mdio.h (Yaniv Rosner)- bnx2x: Add a periodic task for link PHY events (Yaniv Rosner)- bnx2x: Adjust BCM84833 to BCM578xx (Yaniv Rosner)- bnx2x: Adjust ETS to 578xx (Yaniv Rosner)- bnx2x: Add new PHY 54616s (Yaniv Rosner)- bnx2x: Add Warpcore support for 578xx (Yaniv Rosner)- bnx2x: Add new MAC support for 578xx (Yaniv Rosner)- bnx2x: Cosmetic changes. (Dmitry Kravkov)- bnx2x: update DCB data during PMF migration (Dmitry Kravkov)- bnx2x: 57712 parity handling (Vladislav Zolotarov)- New 7.0 FW: bnx2x, cnic, bnx2i, bnx2fc (Vlad Zolotarov)- cnic: Move indexing function pointers to struct kcq_info (Michael Chan)- linux-firmware: Add a new FW 7.0.20.0 (Vladislav Zolotarov)- ixgbe: Fix FCOE memory leak for DDP packets (Alexander Duyck)- ixgbe: fix PHY link setup for 82599 (Emil Tantilov)- ixgbe: fix __ixgbe_notify_dca() bail out code (Don Skidmore)- ixgbe: convert to ndo_fix_features (Don Skidmore)- ixgbe: only enable WoL for magic packet by default (Andy Gospodarek)- ixgbe: remove ifdef check for non-existent define (Emil Tantilov)- ixgbe: Pass staterr instead of re-reading status and error bits from descriptor (Alexander Duyck)- ixgbe: Move interrupt related values out of ring and into q_vector (Alexander Duyck)- ixgbe: add structure for containing RX/TX rings to q_vector (Alexander Duyck)- ixgbe: inline the ixgbe_maybe_stop_tx function (Alexander Duyck)- ixgbe: Update ATR to use recorded TX queues instead of CPU for routing (Alexander Duyck)- ixgbe: Make certain to initialize the fdir_perfect_lock in all cases (Alexander Duyck)- e1000: always call e1000_check_for_link() on e1000_ce4100 MACs. (Nicolas Schichan)- e1000: do vlan cleanup (Jiri Pirko)- e1000: convert to ndo_fix_features (Michał Mirosław)- e1000: remove unnecessary code (Greg Dietsche)- igbvf: do vlan cleanup (Jiri Pirko)- ixgbe: A fix to VF TX rate limit (Lior Levy)- ixgbe: Update method used for determining descriptor count for an skb (Alexander Duyck)- ixgbe: Add one function that handles most of context descriptor setup (Alexander Duyck)- ixgbe: Move all values that deal with count, next_to_use, next_to_clean to u16 (Alexander Duyck)- ixgbe: Convert IXGBE_DESC_UNUSED from macro to static inline function (Alexander Duyck)- ixgbe: pass adapter struct instead of netdev for interrupt data (Alexander Duyck)- ixgbe: update driver version string (Don Skidmore)- ixgbe: fix ring assignment issues for SR-IOV and drop cases (Alexander Duyck)- ixgbe: disable RSC when Rx checksum is off (Emil Tantilov)- ixgbe: move reset code into a separate function (Emil Tantilov)- ixgbe: move setting RSC into a separate function (Emil Tantilov)- ixgbe: add support for nfc addition and removal of filters (Alexander Duyck)- ixgbe: add support for displaying ntuple filters via the nfc interface (Alexander Duyck)- ixgbe: add basic support for setting and getting nfc controls (Alexander Duyck)- ixgbe: update perfect filter framework to support retaining filters (Alexander Duyck)- ixgbe: fix flags relating to perfect filters to support coexistence (Alexander Duyck)- ixgbe: remove ntuple filtering (Alexander Duyck)- ixgbe: setup per CPU PCI pool for FCoE DDP (Vasu Dev)- ixgbe: add support for Dell CEM (Emil Tantilov)- bnx2x: Created bnx2x_sp (Vladislav Zolotarov)- bnx2x: removed unused variables (Dmitry Kravkov)- bnx2x: use bnx2x_reload_if_running (Dmitry Kravkov)- bnx2x: dump FW memory when appropriate msglvl is raised (Dmitry Kravkov)- bnx2x: do not call link update without HW notification (Yaniv Rosner)- bnx2x: disable fairness if ETS is enabled (Dmitry Kravkov)- bnx2x: avoid release of unrequested irqs (Dmitry Kravkov)- bnx2x: put start bd csum in separate function (Dmitry Kravkov)- bnx2x: remove references to intr_sem (Dmitry Kravkov)- bnx2x: do not allocate FCoE ring if disabled (Dmitry Kravkov)- bnx2x: Improve cl45 access methods (Yaniv Rosner)- bnx2x: Modify XGXS functions (Yaniv Rosner)- bnx2x: Fix link status sync (Yaniv Rosner)- bnx2x: Adjust BCM8726 module detection settings (Yaniv Rosner)- bnx2x: Fix grammar and relocate code (Yaniv Rosner)- bnx2x: Fix BCM84833 settings (Yaniv Rosner)- bnx2x: Fix over current port display (Yaniv Rosner)- bnx2x: Add TX fault check for fiber PHYs (Yaniv Rosner)- bnx2x: Change return status type (Yaniv Rosner)- bnx2x: Fix port type display (Yaniv Rosner)- bnx2x: Add new phy BCM8722 (Yaniv Rosner)- Revert \"bnx2fc: Fix kernel panic when deleting NPIV ports\" (Bob Picco)- Revert \"bnx2fc: scsi_dma_unmap() not invoked on IO completions\" (Bob Picco)- Revert \"bnx2x: prevent flooded warnning kernel info\" (Bob Picco)- Revert \"bnx2x: fix hw attention handling\" (Bob Picco)- Revert \"bnx2x: add missing break in bnx2x_dcbnl_get_cap\" (Bob Picco)- ixgbe: DCB and perfect filters can coexist (John Fastabend)- ixgbe: fix bit mask for DCB version (John Fastabend)- ixgbe: setup redirection table for multiple packet buffers (John Fastabend)- ixgbe: DCB 82598 devices, tx_idx and rx_idx swapped (John Fastabend)- ixgbe: DCB use existing TX and RX queues (John Fastabend)- ixgbe: configure minimal packet buffers to support TC (John Fastabend)- ixgbe: consolidate MRQC and MTQC handling (John Fastabend)- ixgbe: consolidate packet buffer allocation (John Fastabend)- ixgbe: dcbnl reduce duplicated code and indentation (John Fastabend)- ixgbevf: do vlan cleanup (Jiri Pirko)- ixgbevf: remove unnecessary ampersands (Stephen Hemminger)- ixgbevf: Fix bungled declaration of ixgbevf_mbx_ops (Greg Rose)- ixgbevf: Update the driver string (Greg Rose)- e1000e: workaround invalid Tx/Rx tail descriptor register write (Bruce Allan)- e1000e: Spurious interrupts & dropped packets with 82577/8/9 in half-duplex (Bruce Allan)- e1000e: increase driver version number (Bruce Allan)- e1000e: alternate MAC address update (Bruce Allan)- e1000e: do not disable receiver on 82574/82583 (Bruce Allan)- e1000e: minor re-order of #include files (Bruce Allan)- e1000e: remove unnecessary check for NULL pointer (Bruce Allan)- intel drivers: repair missing flush operations (Jesse Brandeburg)- e1000e: use GFP_KERNEL allocations at init time (Jeff Kirsher)- e1000e: Add Jumbo Frame support to 82583 devices (Carolyn Wyborny)- e1000e: remove e1000_queue_stats (Eric Dumazet)- net: e1000e: Use is_multicast_ether_addr helper (Tobias Klauser)- e1000e: remove unnecessary reads of PCI_CAP_ID_EXP (Jon Mason)- e1000e: update driver version (Bruce Allan)- e1000e: Clear host wakeup bit on 82577/8 without touching PHY page 800 (Bruce Allan)- e1000e: access multiple PHY registers on same page at the same time (Bruce Allan)- e1000e: do not schedule the Tx queue until ready (Bruce Allan)- e1000e: log when swflag is cleared unexpectedly on ICH/PCH devices (Bruce Allan)- e1000e: 82579 intermittently disabled during S0->Sx (Bruce Allan)- e1000e: disable far-end loopback mode on ESB2 (Bruce Allan)- net: introduce __netdev_alloc_skb_ip_align (Eric Dumazet)- update modsign (Maxim Uvarov) [Orabug: 13615815]
* Tue Jan 31 2012 Guru Anbalagane [2.6.39-100.0.22.el5uek]- xfs: fix acl count validation in xfs_acl_from_disk() (Dan Carpenter) CVE-2012-0038- Updated driver version to 5.02.00.00.06.02-uek2 (Tej Parkash)- ocfs2: use spinlock irqsave for downconvert lock.patch (Srinivas Eeda)- dm-nfs-for-uek2 (Adnan Misherfi)
* Thu Jan 26 2012 Guru Anbalagane [2.6.39-100.0.21.el5uek]- git-changelog: add Orabug and CVE (Maxim Uvarov) [Add parsing Orabug and CVE.]- qla2xxx: Update the driver version to 8.03.07.12.39.0-k. (Giridhar Malavali)- Add support for pv hugepages and support for huge balloon pages. (Dave McCracken)- Btrfs: remove some verbose warnings (Chris Mason)- Btrfs: fix reservations in btrfs_page_mkwrite (Chris Mason)- Btrfs: use larger system chunks (Chris Mason)- Btrfs: add a delalloc mutex to inodes for delalloc reservations (Josef Bacik)- Btrfs: protect orphan block rsv with spin_lock (Josef Bacik)- Btrfs: don\'t call btrfs_throttle in file write (Josef Bacik)- Btrfs: release space on error in page_mkwrite (Josef Bacik)- Btrfs: fix btrfsck error 400 when truncating a compressed (Miao Xie)- Btrfs: do not use btrfs_end_transaction_throttle everywhere (Josef Bacik)- Btrfs: fix possible deadlock when opening a seed device (Li Zefan)- Btrfs: update global block_rsv when creating a new block group (Li Zefan)- Btrfs: rewrite btrfs_trim_block_group() (Li Zefan)- Btrfs: simplfy calculation of stripe length for discard operation (Li Zefan)- Btrfs: don\'t pre-allocate btrfs bio (Li Zefan)- Btrfs: don\'t pass a trans handle unnecessarily in volumes.c (Li Zefan)- Btrfs: reserve metadata space in btrfs_ioctl_setflags() (Li Zefan)- Btrfs: remove BUG_ON()s in btrfs_ioctl_setflags() (Li Zefan)- Btrfs: check the return value of io_ctl_init() (Li Zefan)- Btrfs: avoid possible NULL deref in io_ctl_drop_pages() (Li Zefan)- Btrfs: add pinned extents to on-disk free space cache correctly (Li Zefan)- Btrfs: revamp clustered allocation logic (Alexandre Oliva)- Btrfs: don\'t set up allocation result twice (Alexandre Oliva)- Btrfs: test free space only for unclustered allocation (Alexandre Oliva)- Btrfs: use bigger metadata chunks on bigger filesystems (Chris Mason)- Btrfs: lower the bar for chunk allocation (Chris Mason)- Btrfs: run chunk allocations while we do delayed refs (Chris Mason)- Btrfs: call d_instantiate after all ops are setup (Al Viro)- Btrfs: fix worker lock misuse in find_worker (Chris Mason)- xen/config: turn CONFIG_XEN_DEBUG_FS off. (Konrad Rzeszutek Wilk)- proc: clean up and fix /proc//mem handling (Maxim Uvarov) [Orabug: 13618927] CVE-2012-0056- set XEN_MAX_DOMAIN_MEMORY for 512 (Maxim Uvarov)- add __init arguments to init functions (Maxim Uvarov)- hpwdt: clean up set_memory_x call for 32 bit (Maxim Uvarov)
* Thu Jan 12 2012 Maxim Uvarov [2.6.39-100.0.20.el5uek]- Enable Kabi Check (Guru Anbalagane)- net/bna driver update from 2.3.2.3 to 3.0.2.2 (Maxim Uvarov)- scsi/bfa driver update from 2.3.2.3 to 3.0.2.2 (Maxim Uvarov)- Updated version to 5.02.00.00.06.02-uek1 (Tej Parkash)- qla4xxx: Added error logging for firmware abort (Nilesh Javali)- qla4xxx: Disable generating pause frames in case of FW hung (Giridhar Malavali)- qla4xxx: Temperature monitoring for ISP82XX core. (Mike Hernandez)- qla4xxx: check for FW alive before calling chip_reset (Shyam Sunder)- qla4xxx: Remove the unused macros (Tej Parkash)- qla4xxx: cleanup, make qla4xxx_build_ddb_list short (Lalit Chandivade)- qla4xxx: clear the RISC interrupt bit during firmware init (Sarang Radke)- qla4xxx: clear the SCSI COMPLETION INTERRUPT bit during firmware init (Prasanna Mumbai)- qla4xxx: Fixed BFS with sendtargets as boot index. (Manish Rangankar)- qla4xxx: Correct the default relogin timeout value (Nilesh Javali)- qla4xxx: Limit the ACB Default Timeout value to 12s (Nilesh Javali)- bond_alb: don\'t disable softirq under bond_alb_xmit (Maxim Uvarov)- fix kernel version (Guru Anbalagane)
* Tue Jan 10 2012 Maxim Uvarov [2.6.39-100.0.19.el5uek]- scripts/git-changelog: generate rpm changelog script (Maxim Uvarov)- Revert \"hpwd watchdog mark page executable\" (Maxim Uvarov)- Partial revert of mainline removal of deprecated sysfs interface for 13568528 (Chuck Anderson)- scsi:lpfc update to 8.3.5.58 (Maxim Uvarov)- Let KERNEL_VERSION be 3.0.x, and override UTSNAME (Nelson Elhage)- qla4xxx: Fix qla4xxx_dump_buffer to dump buffer correctly (Vikas Chaudhary)- qla4xxx: Fix the IDC locking mechanism (Nilesh Javali)- qla4xxx: Wait for disable_acb before doing set_acb (Vikas Chaudhary)- qla4xxx: Don\'t recover adapter if device state is FAILED (Sarang Radke)- qla4xxx: fix call trace on rmmod with ql4xdontresethba=1 (Sarang Radke)- qla4xxx: Fix CPU lockups when ql4xdontresethba set (Mike Hernandez)- qla4xxx: Perform context resets in case of context failures. (Vikas Chaudhary)- do not obsolete firmware (Maxim Uvarov)- Revert \"xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel\" (Konrad Rzeszutek Wilk)- Revert \"xen-blkback: convert hole punching to discard request on loop devices\" (Maxim Uvarov)- ath9k: Fix kernel panic in AR2427 in AP mode (Mohammed Shafi Shajakhan)- ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race (Oleg Nesterov)- Revert \"rtc: Disable the alarm in the hardware\" (Linus Torvalds)- hung_task: fix false positive during vfork (Mandeep Singh Baines)- drm/radeon/kms/atom: fix possible segfault in pm setup (Alexander Müller)- xfs: log all dirty inodes in xfs_fs_sync_fs (Christoph Hellwig)- xfs: log the inode in ->write_inode calls for kupdate (Christoph Hellwig)- mfd: Turn on the twl4030-madc MADC clock (Kyle Manna)- mfd: Check for twl4030-madc NULL pointer (Kyle Manna)- mfd: Copy the device pointer to the twl4030-madc structure (Kyle Manna)- mfd: Fix mismatch in twl4030 mutex lock-unlock (Sanjeev Premi)- iwlwifi: update SCD BC table for all SCD queues (Emmanuel Grumbach)- ipv4: using prefetch requires including prefetch.h (Stephen Rothwell)- ipv4: reintroduce route cache garbage collector (Eric Dumazet)- ipv4: flush route cache after change accept_local (Weiping Pan)- sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd (Thomas Graf)- sctp: fix incorrect overflow check on autoclose (Xi Wang)- sch_gred: should not use GFP_KERNEL while holding a spinlock (Eric Dumazet)- net: have ipconfig not wait if no dev is available (Gerlando Falauto)- mqprio: Avoid panic if no options are provided (Thomas Graf)- llc: llc_cmsg_rcv was getting called after sk_eat_skb. (Alex Juncu)- ppp: fix pptp double release_sock in pptp_bind() (Djalal Harouni)- net: bpf_jit: fix an off-one bug in x86_64 cond jump target (Markus Kötter)- sparc: Fix handling of orig_i0 wrt. debugging when restarting syscalls. (David S. Miller)- sparc64: Fix masking and shifting in VIS fpcmp emulation. (David S. Miller)- sparc32: Correct the return value of memcpy. (David S. Miller)- sparc32: Remove uses of %g7 in memcpy implementation. (David S. Miller)- sparc32: Remove non-kernel code from memcpy implementation. (David S. Miller)- sparc: Kill custom io_remap_pfn_range(). (David S. Miller)- sparc64: Patch sun4v code sequences properly on module load. (David S. Miller)- sparc32: Be less strict in matching %lo part of relocation. (David S. Miller)- sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq(). (David S. Miller)- mm: hugetlb: fix non-atomic enqueue of huge page (Hillf Danton)- drm/radeon/kms: bail on BTC parts if MC ucode is missing (Alex Deucher)- watchdog: hpwdt: Changes to handle NX secure bit in 32bit path (Mingarelli, Thomas)- futex: Fix uninterruptible loop due to gate_area (Hugh Dickins)- oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue (Vladimir Zapolskiy)- ARM: 7220/1: mmc: mmci: Fixup error handling for dma (Ulf Hansson)- ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR (Ulf Hansson)- ARM:imx:fix pwm period value (Jason Chen)- VFS: Fix race between CPU hotplug and lglocks (Srivatsa S. Bhat)- memcg: keep root group unchanged if creation fails (Hillf Danton)- iwlwifi: allow to switch to HT40 if not associated (Wey-Yi Guy)- iwlwifi: do not set the sequence control bit is not needed (Wey-Yi Guy)- ath9k: fix max phy rate at rate control init (Rajkumar Manoharan)- media: s5p-fimc: Use correct fourcc for RGB565 colour format (Sylwester Nawrocki)- vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL (Dave Kleikamp)- mfd: Fix twl-core oops while calling twl_i2c_
* for unbound driver (Ilya Yanok)- cgroups: fix a css_set not found bug in cgroup_attach_proc (Mandeep Singh Baines)- mmc: vub300: fix type of firmware_rom_wait_states module parameter (Rusty Russell)- nilfs2: unbreak compat ioctl (Thomas Meyer)- SELinux: Fix RCU deref check warning in sel_netport_insert() (David Howells)- NFSv4.1: Ensure that we handle _all_ SEQUENCE status bits. (Trond Myklebust)- oprofile: Fix uninitialized memory access when writing to writing to oprofilefs (Robert Richter)- oom: fix integer overflow of points in oom_badness (Frantisek Hrbata)- binary_sysctl(): fix memory leak (Michel Lespinasse)- percpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses (Eugene Surovegin)- Input: synaptics - fix touchpad not working after S2R on Vostro V13 (Dmitry Torokhov)- MXC PWM: should active during DOZE/WAIT/DBG mode (Jason Chen)- ssb: fix init regression with SoCs (Hauke Mehrtens)- block: initialize request_queue\'s numa node during (Mike Snitzer)- mac80211: fix another race in aggregation start (Johannes Berg)- SCSI: fcoe: Fix preempt count leak in fcoe_filter_frames() (Thomas Gleixner)- SCSI: zfcp: return early from slave_destroy if slave_alloc returned early (Steffen Maier)- cfq-iosched: fix cfq_cic_link() race confition (Yasuaki Ishimatsu)- cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails (majianpeng)- drm/i915: prevent division by zero when asking for chipset power (Eugeni Dodonov)- rtc: m41t80: Workaround broken alarm functionality (John Stultz)- ipip, sit: copy parms.name after register_netdevice (Ted Feng)- ARM: OMAP: rx51: fix USB (Felipe Contreras)- Revert \"clockevents: Set noop handler in clockevents_exchange_device()\" (Linus Torvalds)- ASoC: core: Don\'t schedule deferred_resume_work twice (Stephen Warren)- USB: option: Removing one bogus and adding some new Huawei combinations (Bjørn Mork)- usb: option: Add Huawei E398 controlling interfaces (Alex Hermann)- USB: cdc-acm: add IDs for Motorola H24 HSPA USB module. (Krzysztof Hałasa)- ibft: Fix finding IBFT ACPI table on UEFI (Yinghai Lu)- drm/radeon/kms: add some new pci ids (Alex Deucher)- staging: r8712u: Add new USB ID (Larry Finger)- fuse: fix fuse_retrieve (Miklos Szeredi)- ext4: handle EOF correctly in ext4_bio_write_page() (Yongqiang Yang)- ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize (Yongqiang Yang)- ext4: avoid hangs in ext4_da_should_update_i_disksize() (Andrea Arcangeli)- ext4: display the correct mount option in /proc/mounts for [no]init_itable (Theodore Ts\'o)- md/raid5: fix bug that could result in reads from a failed device. (NeilBrown)- xfs: avoid synchronous transactions when deleting attr blocks (Christoph Hellwig)- xfs: fix nfs export of 64-bit inodes numbers on 32-bit kernels (Christoph Hellwig)- hwmon: (coretemp) Fix oops on CPU offlining (Jean Delvare)- hfs: fix hfs_find_init() sb->ext_tree NULL ptr oops (Phillip Lougher)- Make TASKSTATS require root access (Linus Torvalds)- jbd/jbd2: validate sb->s_first in journal_get_superblock() (Eryu Guan)- x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked (Mark Langsdorf)- mmc: mxcmmc: fix falling back to PIO (Sascha Hauer)- hwmon: (jz4740) fix signedness bug (Axel Lin)- linux/log2.h: Fix rounddown_pow_of_two(1) (Linus Torvalds)- mac80211: fix race condition caused by late addBA response (Nikolay Martynov)- iwlwifi: do not re-configure HT40 after associated (Wey-Yi Guy)- percpu: fix chunk range calculation (Tejun Heo)- intel-iommu: fix superpage support in pfn_to_dma_pte() (Allen Kay)- intel-iommu: set iommu_superpage on VM domains to lowest common denominator (Allen Kay)- intel-iommu: fix return value of iommu_unmap() API (Allen Kay)- target: Handle 0 correctly in transport_get_sectors_6() (Roland Dreier)- fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API (Al Viro)- mm: vmalloc: check for page allocation failure before vmlist insertion (Mel Gorman)- mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks (Michal Hocko)- ptp: Fix clock_getres() implementation (Thomas Gleixner)- thp: set compound tail page _count to zero (Youquan Song)- thp: add compound tail page _mapcount when mapped (Youquan Song)- fs/proc/meminfo.c: fix compilation error (Claudio Scordino)- ASoC: Provide a more complete DMA driver stub (Mark Brown)- ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode (Hans Verkuil)- ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20 (Jean-Christophe PLAGNIOL-VILLARD)- arm: mx23: recognise stmp378x as mx23 (Wolfram Sang)- ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 (Manjunathappa, Prakash)- alarmtimers: Fix time comparison (Thomas Gleixner)- ALSA: hda/realtek - Fix Oops in alc_mux_select() (Takashi Iwai)- ALSA: sis7019 - give slow codecs more time to reset (David Dillow)- netconsole support for netfront (Zhenzhong Duan)- oracleasm: Fix two merge errors (Martin K. Petersen)- x86/numa: Add constraints check for nid parameters (Petr Holasek)
* Sun Dec 18 2011 Guru Anbalagane [2.6.39-100.0.18.el5uek]- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)- xen: add dom0_op hypercall (Jeremy Fitzhardinge)- xen: add CPU microcode update driver (Jeremy Fitzhardinge)- xen/v86d: Fix /dev/mem to access memory below 1MB (Konrad Rzeszutek Wilk)- x86/microcode: check proper return code. (Ben Guthro)- Oracle ASM Kernel Driver (Martin K. Petersen)- modsign: no sign if keys are missing (Maxim Uvarov)- Set panic_on_oops to default to true (Maxim Uvarov) (Andi Kleen)- direct-io: separate fields only used in the submission path from struct dio- direct-io: fix a wrong comment (Andi Kleen)- direct-io: rearrange fields in dio/dio_submit to avoid holes (Andi Kleen)- direct-io: use a slab cache for struct dio (Andi Kleen)- direct-io: separate map_bh from dio (Andi Kleen)- direct-io: inline the complete submission path (Andi Kleen)- direct-io: merge direct_io_walker into __blockdev_direct_IO (Andi Kleen)- Install include/drm headers (Maxim Uvarov)- VFS: Cache request_queue in struct block_device (Andi Kleen)- DIO: optimize cache misses in the submission path (Andi Kleen)- put firmware to kernel version specific location (Maxim Uvarov)- hpwd watchdog mark page executable (Maxim Uvarov)- SPEC: el5 mkinird more then 5.1.19.6-71.0.10 (Maxim Uvarov)- SPEC: req udev-095-14.27.0.1.el5_7.1 or more (Maxim Uvarov)- SPEC: ol6 req dracut-kernel-004-242.0.3 (Maxim Uvarov) S. Miller)- sparc64: Force the execute bit in OpenFirmware\'s translation entries. (David- sched/rt: Migrate equal priority tasks to available CPUs (Shawn Bohrer)- sched: Fix up wchan borkage (Simon Kirby)- ide-disk: Fix request requeuing (Borislav Petkov)- posix-cpu-timers: Cure SMP wobbles (Peter Zijlstra)- lis3: fix regression of HP DriveGuard with 8bit chip (Takashi Iwai)- ASoC: use a valid device for dev_err() in Zylonite (Arnd Bergmann)- ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC (Axel Lin) calculation. (Michel Dänzer)- drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin- drm/radeon/kms: Fix logic error in DP HPD handler (Alex Deucher)- drm/radeon/kms: fix regression in DP aux defer handling (Alex Deucher)- drm/radeon/kms: add retry limits for native DP aux defer (Alex Deucher)- drm/radeon/kms: fix channel_remap setup (v2) (Alex Deucher)- ptp: fix L2 event message recognition (Richard Cochran)- rt2x00: Serialize TX operations on a queue. (Gertjan van Wingerde)- x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE (Paul Menzel)- qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload (Roland Dreier)- libsas: fix panic when single phy is disabled on a wide port (Mark Salyzyn)- md: Avoid waking up a thread after it has been freed. (NeilBrown)- dm table: avoid crash if integrity profile changes (Mike Snitzer)- mmc: mxs-mmc: fix clock rate setting (Koen Beel)- ARM: mach-ux500: enable fix for ARM errata 754322 (srinidhi kasagar) Deucher)- drm/radeon/kms: retry aux transactions if there are status flags (Alex (Alex Deucher)- drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1- ipv6: fix NULL dereference in udp6_ufo_fragment() (Jason Wang)- ahci: Enable SB600 64bit DMA on Asus M3A (Mark Nelson) Wysocki)- MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2) (Rafael J.- ftrace: Fix regression of :mod:module function enabling (Steven Rostedt) Rostedt)- ftrace: Fix regression where ftrace breaks when modules are loaded (Steven Rostedt)- ftrace: Fix warning when CONFIG_FUNCTION_TRACER is not defined (Steven- e1000e: workaround for packet drop on 82579 at 100Mbps (Bruce Allan)- ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGES (Linus Walleij)- ARM: 7117/1: perf: fix HW_CACHE_
* events on Cortex-A9 (Will Deacon)- HID: usbhid: Add support for SiGma Micro chip (Jeremiah Matthey)- hwmon: (w83627ehf) Properly report thermal diode sensors (Jean Delvare)- Avoid using variable-length arrays in kernel/sys.c (Linus Torvalds)- drm/radeon/kms/atom: fix handling of FB scratch indices (Alex Deucher)- cputimer: Cure lock inversion (Peter Zijlstra)- fuse: fix memory leak (Miklos Szeredi) (Thomas Courbon)- Platform: fix samsung-laptop DMI identification for N150/N210/220/N230 Kosina)- HID: magicmouse: ignore \'ivalid report id\' while switching modes, v2 (Jiri- uvcvideo: Fix crash when linking entities (Laurent Pinchart) Forshee)- hfsplus: ensure bio requests are not smaller than the hardware sectors (Seth Skeggs)- drm/ttm: ensure ttm for new node is bound before calling move_notify() (Ben- drm/ttm: unbind ttm before destroying node in accel move cleanup (Ben Skeggs)- CIFS: Fix ERR_PTR dereference in cifs_get_root (Pavel Shilovsky)- xfs: start periodic workers later (Christoph Hellwig)- xfs: use a cursor for bulk AIL insertion (Dave Chinner)- xfs: do not update xa_last_pushed_lsn for locked items (Christoph Hellwig) Hellwig)- xfs: force the log if we encounter pinned buffers in .iop_pushbuf (Christoph- xfs: revert to using a kthread for AIL pushing (Christoph Hellwig)- firewire: sbp2: fix panic after rmmod with slow targets (Chris Boot)- x86: Fix S4 regression (Takashi Iwai)- hwmon: (w83627ehf) Fix negative 8-bit temperature values (Jean Delvare)- mm: fix race between mremap and removing migration entry (Hugh Dickins)- x25: Prevent skb overreads when checking call user data (Matthew Daley)- crypto: ghash - Avoid null pointer dereference if no key is set (Nick Bowler)- ALSA: HDA: conexant support for Lenovo T520/W520 (Daniel Suchy)- ALSA: hda - Add position_fix quirk for Dell Inspiron 1010 (Takashi Iwai) Forshee)- hfsplus: Fix kfree of wrong pointers in hfsplus_fill_super() error path (Seth- CIFS: Fix incorrect max RFC1002 write size value (Pavel Shilovsky)- CIFS: Fix DFS handling in cifs_get_file_info (Pavel Shilovsky)- cris: fix a build error in drivers/tty/serial/crisv10.c (WANG Cong)- TTY: drop driver reference in tty_open fail path (Jiri Slaby)- TTY: make tty_add_file non-failing (Jiri Slaby)- TTY: pty, release tty in all ptmx_open fail paths (Jiri Slaby) Wylder)- USB: for usb_autopm_get_interface_async -EINPROGRESS is not an error (Jim- staging: serqt_usb2: remove ssu100 from supported devices (Bill Pemberton) Consul)- staging: quatech_usb2: Potential lost wakeup scenario in TIOCMIWAIT (Kautuk- Staging: hv: Add support for >2 TB LUN in storage driver. (Mike Sterling) Hartmann)- USB: qcserial: Add support for Sierra Wireless MC8355/Gobi 3000 (Richard Hamisch)- USB: qcserial: add device ID for \"HP un2430 Mobile Broadband Module\" (Rigbert- serial: pxa: work around for errata #20 (Marcus Folkesson) (Ning Jiang)- serial-core: power up uart port early before we do set_termios when resuming- EHCI : introduce a common ehci_setup (Matthieu CASTET)- USB: fix ehci alignment error (Harro Haan)- EHCI: workaround for MosChip controller bug (Alan Stern)- xhci-mem.c: Check for ring->first_seg != NULL (Kautuk Consul)- xHCI: AMD isoc link TRB chain bit quirk (Andiry Xu) Packard)- drm/i915: Wrap DP EDID fetch functions to enable eDP panel power (Keith (Takashi Iwai)- drm/i915/panel: Always record the backlight level again (but cleverly) Deucher)- drm/radeon/kms: bail early in dvi_detect for digital only connectors (Alex Deucher)- drm/radeon/kms: handle !force case in connector detect more gracefully (Alex- drm/radeon/kms: Fix I2C mask definitions (Jean Delvare)- mmc: core: Fix hangs related to insert/remove of cards (Ulf Hansson)- mmc: core: ext_csd.raw_
* used in comparison but never set (Andrei Warkentin) 1180:e823 (Josh Boyer)- PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh- megaraid_sas: Fix instance access in megasas_reset_timer (Adam Radford)- ipr: Always initiate hard reset in kdump kernel (Anton Blanchard)- libsas: set sas_address and device type of rphy (Jack Wang)- isci: fix support for large smp requests (Dan Williams)- isci: fix missed unlock in apc_agent_timeout() (Jeff Skirvin)- ALSA: hda - Remove bad code for IDT 92HD83 family patch (Charles Chin)- ALSA: HDA: Add new revision for ALC662 (David Henningsson) (Nicholas Bellinger)- target: Fix REPORT TARGET PORT GROUPS handling with small allocation length Steiner)- x86: uv2: Workaround for UV2 Hub bug (system global address format) (Jack- x86: Fix compilation bug in kprobes\' twobyte_is_boostable (Josh Stone)- epoll: fix spurious lockdep warnings (Nelson Elhage) Ospite)- leds: save the delay values after a successful call to blink_set() (Antonio- leds: turn the blink_timer off before starting to blink (Antonio Ospite)- usbmon vs. tcpdump: fix dropped packet count (Johannes Stezenbach)- USB: storage: Use normalized sense when emulating autosense (Luben Tuikov)- USB: Fix runtime wakeup on OHCI (Matthew Garrett)- USB: g_printer: fix bug in unregistration (Fabian Godehardt)- usb/core/devio.c: Check for printer class specific request (Matthias Dellweg) Hallyn)- USB: pid_ns: ensure pid is not freed during kill_pid_info_as_uid (Serge- usb: cdc-acm: Owen SI-30 support (Denis Pershin)- USB: add RESET_RESUME for webcams shown to be quirky (Oliver Neukum)- USB: add quirk for Logitech C300 web cam (Jon Levell)- USB: pl2303: add id for SMART device (Eric Benoit)- USB: ftdi_sio: add PID for Sony Ericsson Urban (Hakan Kvist) Stuge)- USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board (Peter- USB: option: convert interface blacklisting to bitfields (Dan Williams) blacklist (Dan Williams)- USB: option: convert Huawei K3765, K4505, K4605 reservered interface to- USB: option: add ZTE product 0x0037 to sendsetup blacklist (Dan Williams) Williams)- USB: option: add various ZTE device network interfaces to the blacklist (Dan- MAINTANERS: update Qualcomm Atheros addresses (Luis R. Rodriguez)- ath9k_hw: Fix descriptor status of TxOpExceeded (Rajkumar Manoharan)- ath9k_hw: Fix magnitude/phase coeff correction (Rajkumar Manoharan)- ath9k_htc: add AVM FRITZ!WLAN 11N v2 support (Luis R. Rodriguez)- ath9k_hw: Fix number of GPIO pins for AR9287/9300 (Mohammed Shafi Shajakhan)- ath9k: disable unnecessary PHY error reporting (Felix Fietkau)- HID: ACRUX - fix enabling force feedback support (Sergei Kolzun)- QE/FHCI: fixed the CONTROL bug (Jerry Huang)- Update email address for stable patch submission (Josh Boyer)- kobj_uevent: Ignore if some listeners cannot handle message (Milan Broz)- caif: Fix BUG() with network namespaces (David Woodhouse) (Stefan Beller)- platform: samsung_laptop: add dmi information for Samsung R700 laptops- Platform: samsung_laptop: add support for X520 machines. (Tommaso Massimi)- Platform: samsung_laptop: samsung backlight for R528/R728 (Smelov Andrey) Stubbs)- platform: samsung_laptop: fix samsung brightness min/max calculations (Jason- Platform: Fix error path in samsung-laptop init (David Herrmann)- kmod: prevent kmod_loop_msg overflow in __request_module() (Jiri Kosina) syncing\" (Trond Myklebust)- Revert \"NFS: Ensure that writeback_single_inode() calls write_inode() when Layton)- nfs: don\'t redirty inode when ncommit == 0 in nfs_commit_unstable_pages (Jeff chipsets(v2) (Ming Lei)- ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge dev_change_net_namespaces (Eric W. Biederman)- rtnetlink: Add missing manual netlink notification in- dp83640: free packet queues on remove (Richard Cochran)- mac80211: fix offchannel TX cookie matching (Johannes Berg)- net: hold sock reference while processing tx timestamps (Richard Cochran)- wl12xx: fix forced passive scans (Luciano Coelho)- time: Change jiffies_to_clock_t() argument type to unsigned long (hank) (NeilBrown)- md/raid5: fix bug that could result in reads from a failed device.- perf probe: Fix to show correct error string (Masami Hiramatsu) Rostedt)- tracing: Fix returning of duplicate data after EOF in trace_pipe_raw (Steven- genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier (Ian Campbell)- nfs: don\'t try to migrate pages with active requests (Jeff Layton)- nfsd4: Remove check for a 32-bit cookie in nfsd4_readdir() (Bernd Schubert)- nfsd4: stop using nfserr_resource for transitory errors (J. Bruce Fields)- nfsd4: fix seqid_mutating_error (J. Bruce Fields)- nfsd4: permit read opens of executable-only files (J. Bruce Fields)- nfsd4: fix open downgrade, again (J. Bruce Fields)- nfsd4: ignore WANT bits in open downgrade (J. Bruce Fields)- hppfs: missing include (Al Viro)- vfs: add \"device\" tag to /proc/self/mountstats (Bryan Schumaker)- io-mapping: ensure io_mapping_map_atomic _is_ atomic (Daniel Vetter)- ASoC: wm8940: Properly set codec->dapm.bias_level (Axel Lin)- ASoC: wm8741: Fix setting interface format for DSP modes (Axel Lin)- ASoC: ak4642: fixup cache register table (Kuninori Morimoto)- ASoC: ak4535: fixup cache register table (Axel Lin)- ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture (Axel Lin)- ASoC: Remove direct register cache accesses from WM8962 driver (Mark Brown)- ASoC: Fix a bug in WM8962 DSP_A and DSP_B settings (Susan Gao)- KVM: s390: check cpu_id prior to using it (Carsten Otte)- user per registers vs. ptrace single stepping (Martin Schwidefsky)- memory leak with RCU_TABLE_FREE (Martin Schwidefsky)- ccwgroup: move attributes to attribute group (Sebastian Ott)- WMI: properly cleanup devices to avoid crashes (Dmitry Torokhov)- iommu/amd: Fix wrong shift direction (Joerg Roedel)- carminefb: Fix module parameters permissions (Jean Delvare) Krzesinski)- fb: avoid possible deadlock caused by fb_set_suspend (Herton Ronaldo (Bruno Prémont)- fb: sh-mobile: Fix deadlock risk between lock_fb_info() and console_lock() Schandinat)- viafb: use display information in info not in var for panning (Florian Tobias- viafb: improve pitch handling (Florian Tobias Schandinat) Lei)- uvcvideo: Set alternate setting 0 on resume if the bus has been reset (Ming- DiBcom: protect the I2C bufer access (Patrick Boettcher)- dib0700: protect the dib0700 buffer access (Olivier Grenie) (Mauro Carvalho Chehab)- tuner_xc2028: Allow selection of the frequency adjustment code for XC3028- /proc/self/numa_maps: restore \"huge\" tag for hugetlb vmas (Andrew Morton) (Paul Fertser)- plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that\'s desired- ARM: mach-ux500: unlock I&D l2x0 caches before init (Linus Walleij) Hayasaka)- mm: avoid null pointer access in vm_struct via /proc/vmallocinfo (Mitsuo- ALSA: hda - Fix ADC input-amp handling for Cx20549 codec (Takashi Iwai)- um: fix ubd cow size (Richard Weinberger) (Andy Whitcroft)- readlinkat: ensure we return ENOENT for the empty pathname for normal lookups- VFS: Fix automount for negative autofs dentries (David Howells)- vfs: automount should ignore LOOKUP_FOLLOW (Miklos Szeredi)- VFS: Fix the remaining automounter semantics regressions (Trond Myklebust)- vfs pathname lookup: Add LOOKUP_AUTOMOUNT flag (Linus Torvalds)- ptrace: don\'t clear GROUP_STOP_SIGMASK on double-stop (Oleg Nesterov)- jsm: remove buggy write queue (Thadeu Lima de Souza Cascardo) (Mitsuo Hayasaka)- bonding: use local function pointer of bond->recv_probe in bond_handle_frame- bridge: fix hang on removal of bridge via netlink (stephen hemminger)- can bcm: fix tx_setup off-by-one errors (Oliver Hartkopp)- ipv4: fix ipsec forward performance regression (Yan, Zheng)- l2tp: fix a potential skb leak in l2tp_xmit_skb() (Eric Dumazet) Ward)- macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode (David- netconsole: enable netconsole can make net_device refcnt incorrent (Gao feng)- tcp: properly handle md5sig_pool references (Yan, Zheng)- tcp: properly update lost_cnt_hint during shifting (Yan, Zheng)- tg3: negate USE_PHYLIB flag check (Jiri Pirko) Zheng)- ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket (Yan, ring (Willem de Bruijn)- make PACKET_STATISTICS getsockopt report consistently between ring and non- Vrabel)- net: xen-netback: correctly restart Tx after a VM restore/migrate (David- mm: thp: tail page refcounting fix (Andrea Arcangeli)- binfmt_elf: fix PIE execution with randomization disabled (Jiri Kosina) Torvalds)- vfs: show O_CLOEXE bit properly in /proc//fdinfo/ files (Linus- iwlagn: do not use interruptible waits (Johannes Berg) Bounine)- drivers/net/rionet.c: fix ethernet address macros for LE platforms (Alexandre- hwspinlock/core: use a mutex to protect the radix tree (Juan Gutierrez) (Clifton Barnes)- drivers/power/ds2780_battery.c: create central point for calling w1 interface (Clifton Barnes)- drivers/power/ds2780_battery.c: add a nolock function to w1 interface (Clifton Barnes)- drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal (Theodore Ts\'o)- ext2,ext3,ext4: don\'t inherit APPEND_FL or IMMUTABLE_FL for new inodes Wong)- ext4: ext4_rename should dirty dir_bh with the correct directory (Darrick J. (Darrick J. Wong)- ext4: ext4_mkdir should dirty dir_block with newly created directory inode (Theodore Ts\'o)- ext4: call ext4_handle_dirty_metadata with correct inode in ext4_dx_add_entry- ext4: fix race in xattr block allocation path (Eric Sandeen) (Vasanthy Kolluri)- enic: Bug Fix: Fix hardware transmit queue indexing in enic_poll_controller li)- rtl8150: rtl8150_disconnect(...) does not need tasklet_disable(...) (huajun- USB: EHCI: Fix test mode sequence (Boris Todorov) (Arvid Brodin)- usb/isp1760: Added missing call to usb_hcd_check_unlink_urb() during unlink- USB: Serial: Add device ID for Sierra Wireless MC8305 (Florian Echtler) (Artur Zimmer)- USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-device- usbnet/cdc_ncm: Don\'t use stack variables for DMA (Josh Boyer)- USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth. (Sarah Sharp)- ipheth: iPhone 4 Verizon CDMA USB Product ID add (Kavan Smith)- USB: xHCI: prevent infinite loop when processing MSE event (Andiry Xu)- ASIX: Simplify condition in rx_fixup() (Marek Vasut)- ASIX: Use only 11 bits of header for data size (Marek Vasut)- Bluetooth: Add MacBookAir4,1 support (Pieter-Augustijn Van Malleghem)- Bluetooth: Add Toshiba laptops AR30XX device ID (Ricardo Mendoza)- Bluetooth: Add Atheros AR3012 one PID/VID supported (Steven.Li)- Bluetooth: add support for 2011 mac mini (Jurgen Kramer)- btusb: add device entry for Broadcom SoftSailing (Oliver Neukum)- usb_storage: Don\'t freeze in usb-stor-scan (Seth Forshee)- xhci: If no endpoints changed, don\'t issue BW command. (Sarah Sharp)- xHCI: test and clear RWC bit (Andiry Xu)- xHCI: Clear PLC for USB2 root hub ports (Andiry Xu)- can bcm: fix incomplete tx_setup fix (Oliver Hartkopp) Arcangeli)- powerpc: remove superfluous PageTail checks on the pte gup_fast (Andrea- powerpc: get_hugepte() don\'t put_page() the wrong page (Andrea Arcangeli) Arcangeli)- powerpc: gup_hugepte() avoid freeing the head page too many times (Andrea- powerpc: gup_hugepte() support THP based tail recounting (Andrea Arcangeli)- powerpc: gup_huge_pmd() return 0 if pte changes (Andrea Arcangeli)- s390: gup_huge_pmd() support THP tail recounting (Andrea Arcangeli)- s390: gup_huge_pmd() return 0 if pte changes (Andrea Arcangeli)- thp: share get_huge_page_tail() (Andrea Arcangeli)- bridge: leave carrier on for empty bridge (stephen hemminger)- net: Unlock sock before calling sk_free() (Thomas Gleixner)- ALSA: ua101: fix crash when unplugging (Clemens Ladisch) (Charles Chin)- ALSA: hda - Disable power-widget control for IDT 92HD83/93 as default- ALSA: hda - Add support for 92HD65 / 92HD66 family of codecs (Charles Chin)- ALSA: hda/realtek - Skip invalid digital out pins (Takashi Iwai) (Jerome Glisse)- drm/radeon: avoid bouncing connector status btw disconnected & unknown- drm/radeon/kms: split MSI check into a separate function (Alex Deucher)- drm/radeon/kms: Add MSI quirk for HP RS690 (Alex Deucher) Glisse)- drm/radeon: set hpd polarity at init time so hotplug detect works (Jerome- drm/radeon/kms: properly set panel mode for eDP (Alex Deucher)- drm/radeon/kms: Add MSI quirk for Dell RS690 (Alex Deucher)- drm/radeon/kms: add MSI module parameter (Alex Deucher)- drm/radeon/kms: set HPD polarity in hpd_init() (Alex Deucher)- kbuild: Fix help text not displayed in choice option. (Srinivas Kandagatla)- PM / Runtime: Automatically retry failed autosuspends (Alan Stern)- USB: Update last_busy time after autosuspend fails (Alan Stern) (Mike Miller)- cciss: add small delay when using PCI Power Management to reset for kump- hwmon: (coretemp) Fix for non-SMP builds (Jean Delvare) Delvare)- hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types (Jean- hwmon: (w83627ehf) Fix broken driver init (Guenter Roeck) (Nicholas Bellinger)- tcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDB- st: fix race in st_scsi_execute_end (Petr Uzel)- scsi_dh: check queuedata pointer before proceeding further (Moger, Babu)- Make scsi_free_queue() kill pending SCSI commands (Bart Van Assche)- Fix block queue and elevator memory leak in scsi_alloc_sdev (Anton Blanchard) (nagalakshmi.nandigama)- mpt2sas: Fix for system hang when discovery in progress (Axel Lin)- ASoC: wm8711: Fix wrong mask for setting input audio data bit length select wm8711_set_dai_fmt (Axel Lin)- ASoC: Leave input audio data bit length settings untouched in- ASoC: WM8904: Set `invert\' bit for Capture Switch (Hong Xu)- ASoC: Ensure WM8962 PLL registers are reset (Mark Brown)- ASoC: Ensure the WM8962 oscillator and PLLs start up disabled (Mark Brown)- NFS/sunrpc: don\'t use a credential with extra groups. (NeilBrown)- block: make gendisk hold a reference to its queue (Tejun Heo)- VFS: fix statfs() automounter semantics regression (Dan McGee) Miller)- hpsa: add small delay when using PCI Power Management to reset for kump (Mike- VFS: we need to set LOOKUP_JUMPED on mountpoint crossing (Al Viro) Blanchard)- powerpc/numa: Remove double of_node_put in hot_add_node_scn_to_nid (Anton (Anton Blanchard)- powerpc: Fix oops when echoing bad values to /sys/devices/system/memory/probe Blanchard)- powerpc/pseries: Avoid spurious error during hotplug CPU add (Anton- powerpc/eeh: Fix /proc/ppc64/eeh creation (Thadeu Lima de Souza Cascardo)- powerpc: Fix deadlock in icswx code (Anton Blanchard) Luck)- ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() (Tony- netlink: validate NLA_MSECS length (Johannes Berg) Manoharan)- ath9k_hw: Update AR9485 initvals to fix system hang issue (Rajkumar- mac80211: fix remain_off_channel regression (Eliad Peller)- mac80211: config hw when going back on-channel (Eliad Peller)- mac80211: disable powersave for broken APs (Johannes Berg)- mtd: mtdchar: add missing initializer on raw write (Peter Wippich)- mtd: provide an alias for the redboot module name (Andres Salomon)- mtd: pxa3xx_nand: fix nand detection issue (Lei Wen)- mtd: pxa3xx_nand: Fix blank page ECC mismatch (Daniel Mack) (Jiaying Zhang)- ext4: remove i_mutex lock in ext4_evict_inode to fix lockdep complaining- net: Align AF-specific flowi structs to long (David Ward) (dpward)- net: Handle different key sizes between address families in flow cache- PM / Suspend: Off by one in pm_suspend() (Dan Carpenter)- crypto: cryptd - Use subsys_initcall to prevent races with aesni (Herbert Xu) Cochran)- dp83640: use proper function to free transmit time stamping packets (Richard Manoharan)- ath9k_hw: Fix regression of register offset for AR9003 chips (Rajkumar Adam (Adam))- mtd: nand_base: always initialise oob_poi before writing OOB data (THOMSON,- HID: add support for new revision of Apple aluminum keyboard (Dan Bastone)- HID: add support for HuiJia USB Gamepad connector (Clemens Werther)- HID: add support for MacBookAir4,2 keyboard. (Joshua V. Dillon)- HID: hid-multitouch: Add LG Display Multitouch device. (Jeff Brown)- HID: add MacBookAir4,2 to hid_have_special_driver[] (Jiri Kosina)- HID: Add support MacbookAir 4,1 keyboard (Nobuhiro Iwamatsu)- HID: Add device IDs for Macbook Pro 8 keyboards (Gökçen Eraslan)- HID: hid-apple: add device ID of another wireless aluminium (Andreas Krist)- HID: consolidate MacbookAir 4,1 mappings (Jiri Kosina) translations (Linus Torvalds)- hid/apple: modern macbook airs use the standard apple function key Iwai)- ALSA: hda - Don\'t add elements of other codecs to vmaster slave (Takashi- virtio-pci: fix use after free (Michael S. Tsirkin) Brown)- ASoC: Don\'t use wm8994->control_data in wm8994_readable_register() (Mark- sh: Fix cached/uncaced address calculation in 29bit mode (Nobuhiro Iwamatsu) Anholt)- drm/i915: Fix object refcount leak on mmappable size limit error path. (Eric- drm/nouveau: initialize chan->fence.lock before use (Marcin Slusarz)- drm/radeon/kms: make an aux failure debug only (Alex Deucher) Iwai)- ALSA: usb-audio - Check the dB-range validity in the later read, too (Takashi Iwai)- ALSA: usb-audio - Fix the missing volume quirks at delayed init (Takashi- KEYS: Fix a NULL pointer deref in the user-defined key type (David Howells)- hfs: add sanity check for file name length (Dan Carpenter) (Johan Hovold)- Revert \"leds: save the delay values after a successful call to blink_set()\"- drm/radeon: add some missing FireMV pci ids (Alex Deucher) (Jesse Barnes)- drm/i915: enable ring freq scaling, RC6 and graphics turbo on Ivy Bridge v3- sfi: table irq 0xFF means \'no interrupt\' (Kirill A. Shutemov)- x86, mrst: use a temporary variable for SFI irq (Mika Westerberg)- b43: refuse to load unsupported firmware (Rafał Miłecki)- md/raid5: abort any pending parity operations when array fails. (NeilBrown)- mfd: Fix twl4030 dependencies for audio codec (Thomas Weber)- powerpc/ps3: Fix lost SMP IPIs (Geoff Levand)- powerpc: Copy down exception vectors after feature fixups (Anton Blanchard)- backing-dev: ensure wakeup_timer is deleted (Rabin Vincent) Hutchings)- block: Always check length of all iov entries in blk_rq_map_user_iov() (Ben- genirq: Fix irqfixup, irqpoll regression (Edward Donovan)- fix WARNING: at drivers/scsi/scsi_lib.c:1704 (James Bottomley)- hpsa: Disable ASPM (Matthew Garrett) Averin)- aacraid: controller hangs if kernel uses non-default ASPM policy (Vasily- saa7164: Add support for another HVR2200 hardware revision (Tony Jago)- drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend (Adam Jackson) Marinas)- ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors (Catalin- Net, libertas: Resolve memory leak in if_spi_host_to_card() (Jesper Juhl) Wingerde)- rt2x00: Fix sleep-while-atomic bug in powersaving code. (Gertjan van- mac80211: fix NULL dereference in radiotap code (Johannes Berg)- mac80211: fix bug in ieee80211_build_probe_req (Johannes Berg)- nl80211: fix HT capability attribute validation (Johannes Berg) Rodriguez)- cfg80211: fix bug on regulatory core exit on access to last_request (Luis R.- ip6_tunnel: copy parms.name after register_netdevice (Josh Boyer)- PM / driver core: disable device\'s runtime PM during shutdown (Peter Chen)- pch_phub: Support new device LAPIS Semiconductor ML7831 IOH (Tomoya MORINAGA)- pch_phub: Fix MAC address writing issue for LAPIS ML7831 (Tomoya MORINAGA)- pch_uart: Fix hw-flow control issue (Tomoya MORINAGA)- pch_uart: Fix DMA resource leak issue (Tomoya MORINAGA)- pch_uart: Support new device LAPIS Semiconductor ML7831 IOH (Tomoya MORINAGA)- tty: hvc_dcc: Fix duplicate character inputs (Stephen Boyd)- TTY: ldisc, allow waiting for ldisc arbitrarily long (Jiri Slaby)- TTY: ldisc, move wait idle to caller (Jiri Slaby)- TTY: ldisc, wait for ldisc infinitely in hangup (Jiri Slaby) (Jeff Layton)- nfs: when attempting to open a directory, fall back on normal lookup (try #5)- pcie-gadget-spear: Add \"platform:\" prefix for platform modalias (Axel Lin) (Claudio Scordino)- drivers/base/node.c: fix compilation error with older versions of gcc- xhci: Set slot and ep0 flags for address command. (Sarah Sharp)- usb, xhci: Clear warm reset change event during init (Don Zickus)- usb, xhci: fix lockdep warning on endpoint timeout (Don Zickus)- USB: XHCI: resume root hubs when the controller resumes (Alan Stern)- USB: option: release new PID for ZTE 3G modem (zheng.zhijian)- USB: option: add PID of Huawei E173s 3G modem (Ferenc Wagner)- USB: serial: pl2303: rm duplicate id (wangyanqing)- USB: cdc-acm: Fix disconnect() vs close() race (Havard Skinnemoen)- USB: workaround for bug in old version of GCC (Alan Stern)- USB: ark3116 initialisation fix (Bart Hartgers)- USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c (Andrew Worsley)- usb-storage: Accept 8020i-protocol commands longer than 12 bytes (Alan Stern)- USB: EHCI: fix HUB TT scheduling issue with iso transfer (Thomas Poussevin)- USB: add quirk for Logitech C600 web cam (Josh Boyer)- USB: quirks: adding more quirky webcams to avoid squeaky audio (sordna)- xfs: fix error handling for synchronous writes (Christoph Hellwig)- xfs: fix xfs_mark_inode_dirty during umount (Christoph Hellwig)- xfs: dont serialise direct IO reads on page cache (Dave Chinner)- xfs: avoid direct I/O write vs buffered I/O race (Christoph Hellwig)- xfs: Return -EIO when xfs_vn_getattr() failed (Mitsuo Hayasaka)- xfs: fix buffer flushing during unmount (Christoph Hellwig)- xfs: Fix possible memory corruption in xfs_readlink (Carlos Maiolino)- xfs: use doalloc flag in xfs_qm_dqattach_one() (Mitsuo Hayasaka)- xfs: fix ->write_inode return values (Christoph Hellwig)- drm/i915: fix IVB cursor support (Jesse Barnes)- drm/i915: always set FDI composite sync bit (Jesse Barnes) Kroah-Hartman)- Revert \"USB: EHCI: fix HUB TT scheduling issue with iso transfer\" (Greg supported on the card (Somnath Kotur)- be2net: Fallback to the older opcode if MCC_CREATE_EXT opcode is not- be2net: Fix Rx pause counter for lancer (Selvin Xavier)- be2net: Enable NETIF_F_TSO6 for VLAN traffic for BE (Padmanabh Ratnakar)- be2net: support multiple TX queues (Sathya Perla)- be2net: fix netdev_stats_update (Sathya Perla)- be2net: get rid of multi_rxq module param (Sathya Perla)- be2net: fix initialization of vlan_prio_bmap (Sathya Perla)- be2net: fix certain cmd failure logging (Sathya Perla)- be2net: create/destroy rx-queues on interface open/close (Sathya Perla)- be2net: clear intr bit in be_probe() (Sathya Perla)- benet: Add missing comma between constant string array (Joe Perches)- be2net: account for skb allocation failures (Eric Dumazet)- be2net: move to new vlan model (Ajit Khaparde)- be2net: request native mode each time the card is reset (Sathya Perla)- be2net: cleanup and refactor stats code (Sathya Perla)- be2net: use stats-sync to read/write 64-bit stats (Sathya Perla) Perla)- be2net: remove wrong and unnecessary calls to netif_carrier_off() (Sathya- be2net: no need to query link status (Sathya Perla)- be2net: non-member vlan pkts not received in promiscous mode (Sathya Perla)- be2net: use RX_FILTER cmd to program multicast addresses (Sathya Perla)- be2net: add support for flashing Teranetics PHY firmware (Sathya Perla)- be2net: drop pkts that do not belong to the port (Sathya Perla)- be2net: fix cmd-rx-filter not notifying MCC (Sathya Perla)- benet: fix build error on 32bit arch (Eric Dumazet) vlan_tag (Somnath Kotur)- be2net: Storing the \'vid\' got by the grp5 event instead of storing the- be2net: Fix race in posting rx buffers. (Sathya Perla)- be2net: get rid of memory mapped pci-cfg space address (Sathya Perla)- be2net: fix erx->rx_drops_no_frags wrap around (Sathya Perla)- be2net: increase FW update completion timeout (Sathya Perla)- be2net: remove unused variable (Sathya Perla)- benet: remove bogus \"unlikely\" on vlan check (Jiri Pirko)- be2net: fix multicast filter programming (Sathya Perla)- be2net: Show newly flashed FW ver in ethtool (Sathya Perla) (Somnath Kotur)- be2net: Add 60 second delay to allow FAT dump completion on recovery from EEH Kotur)- be2net: Change the data type of the \'on die temperature\' stat. (Somnath retrieving FAT data (Somnath Kotur)- be2net: Fixed Endianness issues in the response read log length field while- be2net: Modified PCI MaxReadReq size to 4096 bytes (Somnath Kotur)- be2net: Making die temperature ioctl call async (Somnath Kotur)- be2net: fix truesize errors (Eric Dumazet)- be2net: add vlan/rx-mode/flow-control config to be_setup() (Sathya Perla) Perla)- be2net: refactor VF setup/teardown code into be_vf_setup/clear() (Sathya- be2net: don\'t create multiple TXQs in BE2 (Sathya Perla) Perla)- be2net: don\'t create multiple RX/TX rings in multi channel mode (Sathya- be2net: Refactored be_cmds.c file. (Somnath Kotur)- be2net: Changing MAC Address of a VF was broken. (Somnath Kotur)- be2net: Fix endian issue in RX filter command (Padmanabh Ratnakar)- be2net: Fix disabling multicast promiscous mode (Padmanabh Ratnakar)- be2net: Prevent CQ full condition for Lancer (Padmanabh Ratnakar)- be2net: Add detect UE feature for Lancer (Padmanabh Ratnakar) Perla)- be2net: init (vf)_if_handle/vf_pmac_id to handle failure scenarios (Sathya- be2net: stop checking the UE registers after an EEH error (Sathya Perla) Perla)- be2net: don\'t log more than one error on detecting EEH/UE errors (Sathya- be2net: stop issuing FW cmds if any cmd times out (Sathya Perla)- be2net: Fix TX queue create for Lancer (Padmanabh Ratnakar)- be2net: add register dump feature for Lancer (Padmanabh Ratnakar)- be2net: Add EEPROM dump feature for Lancer (Padmanabh Ratnakar)- be2net: Fix VLAN promiscous mode for Lancer (Padmanabh Ratnakar)- be2net: Use V1 query link status command for lancer (Padmanabh Ratnakar)- be2net: Move to new SR-IOV implementation in Lancer (Padmanabh Ratnakar)- be2net: Fix error recovery paths (Padmanabh Ratnakar)- be2net: Add error handling for Lancer (Padmanabh Ratnakar)- be2net: Use new hash key (Padmanabh Ratnakar)- be2net: Fix non utilization of RX queues (Padmanabh Ratnakar)- be2net: Changed version number to 4.1.297o (Somnath Kotur)- Enable BG by default (Maxim Uvarov) Uvarov)- Fixed compiler warning for putting large amount of memory on stack (Maxim- Fixed mailbox double free panic (Maxim Uvarov) Uvarov)- Merge from upstream: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning (Maxim together (Konrad Rzeszutek Wilk)- xen/blk[front|back]: Squash blkif_request_rw and blkif_request_discard (Konrad Rzeszutek Wilk)- xen/blk[front|back]: Enhance discard support with secure erasing support. (Konrad Rzeszutek Wilk)- xen/blkback: Move processing of BLKIF_OP_DISCARD from dispatch_rw_block_io Dongyang)- xen-blkback: convert hole punching to discard request on loop devices (Li Vrabel)- block: xen-blkback: use API provided by xenbus module to map rings (David Vrabel)- xen: use generic functions instead of xen_{alloc, free}_vm_area() (David Vrabel)- block: xen-blkback: use API provided by xenbus module to map rings (David Vrabel)- net: xen-netback: use API provided by xenbus module to map rings (David Vrabel)- xen: map foreign pages for shared rings by updating the PTEs directly (David- xen/pm_idle: Make pm_idle be default_idle under Xen. (Konrad Rzeszutek Wilk) (Konrad Rzeszutek Wilk)- x86/cpa: Use pte_attrs instead of pte_flags on CPA/set_p.._wb/wc operations. Rzeszutek Wilk)- x86/paravirt: Use pte_val instead of pte_flags on CPA pageattr_test (Konrad XenbusStateClosed. (Joe Jin)- xen-blkback: Don\'t disconnect backend until state switched to- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)- ACPI: processor: export necessary interfaces (Kevin Tian) (Kevin Tian)- ACPI: processor: Don\'t setup cpu idle handler when we do not want them.- ACPI: processor: cache acpi_power_register in cx structure (Kevin Tian) Liang)- ACPI: processor: add __acpi_processor_[un]register_driver helpers. (Tang- ACPI: add processor driver for Xen virtual CPUs. (Kevin Tian) for Xen vcpu (Tang Liang)- ACPI: processor: override the interface of register acpi processor handler- ACPI: xen processor: add PM notification interfaces. (Kevin Tian) Tian)- ACPI: xen processor: set ignore_ppc to handle PPC event for Xen vcpu. (Kevin Rzeszutek Wilk)- Revert \"xen/pm_idle: Make pm_idle be default_idle under Xen.\" (Konrad- AIO: Don\'t plug the I/O queue in do_io_submit() (Dave Kleikamp)- mlx4: use pci_dev->revision (Sergei Shtylyov)- mlx4_core: Extend capability flags to 64 bits (Or Gerlitz)- mlx4_core: Read extended capabilities into the flags field (Or Gerlitz)- mlx4: do vlan cleanup (Jiri Pirko)- mlx4: Fixing Ethernet unicast packet steering (Yevgeny Petrilin)- mlx4: decreasing ref count when removing mac (Yevgeny Petrilin)- mlx4_core: Clean up error flow in mlx4_register_mac() (Roland Dreier)- mlx4_en: Assigning TX irq per ring (Joe Jin)- mlx4_en: Removing reserve vectors (Joe Jin)- mlx4_en: Adjusting moderation per each ring (Joe Jin)- mlx4_en: Added missing iounmap upon releasing a device (Joe Jin)- mlx4_en: Fix QP number calculation according to module param (Joe Jin)- mlx4_en: Fix crash upon device initialization error (Joe Jin)- mlx4_en: Adding 40gb speed report for ethtool (Joe Jin)- mlx4: Fix vlan table overflow (Joe Jin)- mlx4_en: Controlling FCS header removal (Joe Jin)- mlx4_en: Checksum counters per ring (Joe Jin)- mlx4_en: Recording rx queue for gro packets (Joe Jin)- mlx4_en: Adding rxhash support (Joe Jin)- mlx4_en: Updating driver version (Joe Jin)- mlx4_en: fix skb truesize underestimation (Joe Jin)- mlx4_en: Remove FCS bytes from packet length. (Joe Jin)- mlx4_en: using non collapsed CQ on TX (Joe Jin) Jin)- mlx4_en: fix WOL handlers were always looking at port2 capability bit (Joe- mlx4_en: adding loopback support (Joe Jin)- netxen: Upgrade netxen_nic driver to v4.0.77 (Joe Jin)- [firmware] radeon: Add License for raedon firmware files (Joe Jin) hanged. (Konrad Rzeszutek Wilk)- xen: Enable CONFIG_XEN_WDT so that we can reboot the box in case the dom0 is Campbell)- xen: only limit memory map to maximum reservation for domain 0. (Ian Rzeszutek Wilk)- xen/swiotlb: Use page alignment for early buffer allocation. (Konrad- eCryptfs: Flush file in vma close (Tyler Hicks) (Jeffrey (Sheng-Hui) Chu)- i2c-algo-bit: Generate correct i2c address sequence for 10-bit target- eCryptfs: Extend array bounds for all filename chars (Tyler Hicks)- crypto: mv_cesa - fix hashing of chunks > 1920 bytes (Phil Sutter)- drm: integer overflow in drm_mode_dirtyfb_ioctl() (Xi Wang)- drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real (Alex Deucher)- drm/i915: Ivybridge still has fences! (Daniel Vetter) Anholt)- drm/i915: Turn on a required 3D clock gating bit on Sandybridge. (Eric- drm/i915: Turn on another required clock gating bit on gen6. (Eric Anholt) Skeggs)- drm/ttm: request zeroed system memory pages for new TT buffer objects (Ben- drm/i915: fix CB tuning check for ILK+ (Jesse Barnes) Helgaas)- PCI hotplug: shpchp: don\'t blindly claim non-AMD 0x7450 device IDs (Bjorn- drm/radeon/kms: fix up gpio i2c mask bits for r4xx (Alex Deucher)- viafb: correct sync polarity for OLPC DCON (Daniel Drake)- ARM: pxa: fix inconsistent CONFIG_USB_PXA27X (Haojian Zhuang)- arm: mx28: fix bit operation in clock setting (Wolfram Sang)- ARM: OMAP: smartreflex: fix IRQ handling bug (Felipe Balbi)- ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined (Ming Lei)- ARM: 7161/1: errata: no automatic store buffer drain (Will Deacon)- ALSA: lx6464es - fix device communication via command bus (Tim Blechmann)- ASoC: fsl_ssi: properly initialize the sysfs attribute object (Timur Tabi)- ASoC: wm8753: Skip noop reconfiguration of DAI mode (Timo Juhani Lindfors) (Mark Brown)- ASoC: Ensure WM8731 register cache is synced when resuming from disabled Myklebust)- SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared (Trond- genirq: fix regression in irqfixup, irqpoll (Edward Donovan)- cgroup_freezer: fix freezing groups with stopped tasks (Michal Hocko)- timekeeping: add arch_offset hook to ktime_get functions (Hector Palacios)- hrtimer: Fix extra wakeups from __remove_hrtimer() (Jeff Ohlstein)- p54spi: Add missing spin_lock_init (Michael Büsch)- p54spi: Fix workqueue deadlock (Michael Büsch)- rt2x00: Fix efuse EEPROM reading on PPC32. (Gertjan van Wingerde)- nl80211: fix MAC address validation (Eliad Peller)- cfg80211: fix regulatory NULL dereference (Johannes Berg)- mac80211: don\'t stop a single aggregation session twice (Johannes Berg) Grumbach)- mac80211: fix race between the AGG SM and the Tx data path (Emmanuel- hwmon: (coretemp) Fix oops on driver load (Jean Delvare)- revert \"mfd: Fix twl4030 dependencies for audio codec\" (Greg Kroah-Hartman)- SCSI: Silencing \'killing requests for dead queue\' (Hannes Reinecke)- hugetlb: release pages in the error path of hugetlb_cow() (Hillf Danton)- drm/radeon/kms: add some new pci ids (Alex Deucher)- drm/radeon/kms: add some loop timeouts in pageflip code (Alex Deucher)- firmware: Sigma: Prevent out of bounds memory access (Lars-Peter Clausen)- firmware: Sigma: Skip header during CRC generation (Lars-Peter Clausen)- firmware: Sigma: Fix endianess issues (Lars-Peter Clausen)- staging: usbip: bugfix for deadlock (Bart Westgeest)- staging: comedi: fix oops for USB DAQ devices. (Bernd Porr)- Staging: comedi: fix mmap_count (Federico Vaga)- Staging: comedi: fix signal handling in read and write (Federico Vaga)- USB: whci-hcd: fix endian conversion in qset_clear() (Dan Carpenter)- HID: Correct General touch PID (Benjamin Tissoires)- usb: ftdi_sio: add PID for Propox ISPcable III (Marcin Kościelnicki)- usb: option: add Huawei E353 controlling interfaces (Dirk Nehring)- usb: option: add SIMCom SIM5218 (Veli-Pekka Peltola)- USB: usb-storage: unusual_devs entry for Kingston DT 101 G2 (Qinglin Ye)- EHCI : Fix a regression in the ISO scheduler (Matthieu CASTET)- xHCI: fix bug in xhci_clear_command_ring() (Andiry Xu)- sched, x86: Avoid unnecessary overflow in sched_clock (Salman Qazi)- x86/mpparse: Account for bus types other than ISA and PCI (Bjorn Helgaas)- x86: Fix \"Acer Aspire 1\" reboot hang (Peter Chubb)- perf/x86: Fix PEBS instruction unwind (Peter Zijlstra) Richter)- oprofile, x86: Fix crash when unloading module (nmi timer mode) (Robert- add missing .set function for NT_S390_LAST_BREAK regset (Martin Schwidefsky)- cfg80211: fix race on init and driver registration (Luis R. Rodriguez)- cfg80211: amend regulatory NULL dereference fix (Luis R. Rodriguez)- genirq: Fix race condition when stopping the irq thread (Ido Yariv) Myklebust)- NFS: Prevent 3.0 from crashing if it receives a partial layout (Trond- xfs: validate acl count (Christoph Hellwig) (Christoph Hellwig)- xfs: force buffer writeback before blocking on the ilock in inode reclaim- xfs: fix attr2 vs large data fork assert (Christoph Hellwig) ftrace_event_call->filter (Tejun Heo)- trace_events_filter: Use rcu_assign_pointer() when setting- rtc: Disable the alarm in the hardware (Rabin Vincent)- tracing: fix event_subsystem ref counting (Ilya Dryomov) Gleixner)- tick-broadcast: Stop active broadcast device when replacing it (Thomas- perf: Fix parsing of __print_flags() in TP_printk() (Steven Rostedt) Natapov)- jump_label: jump_label_inc may return before the code is patched (Gleb- oprofile: Fix crash when unloading module (hr timer mode) (Robert Richter) (Joseph))- clocksource: Fix bug with max_deferment margin calculation (Yang Honggang Gleixner)- clockevents: Set noop handler in clockevents_exchange_device() (Thomas Christie)- iscsi_boot_sysfs: have this module check for null on destruction (Mike (Mike Christie)- iscsi_ibft, be2iscsi, iscsi_boot: fix boot kobj data lifetime management- block: add bsg helper library (Mike Christie)- bsg-lib: add module.h include (Jens Axboe)- iscsi_transport: add support for net settings (Mike Christie)- qla4xxx: add support for set_net_config (Mike Christie)- qla4xxx: Added new \"struct ipaddress_config\" (Vikas Chaudhary)- iscsi class: add iface representation (Mike Christie)- qla4xxx: added support to show multiple iface in sysfs (Vikas Chaudhary)- iscsi cls: sysfs group is_visible callout for conn attrs (Mike Christie)- iscsi class: sysfs group is_visible callout for session attrs (Mike Christie)- iscsi class: remove iface param mask (Mike Christie) Christie)- iscsi class: sysfs group is_visible callout for iscsi host attrs (Mike- iscsi class: expand vlan support (Mike Christie)- qla4xxx: Add VLAN support (Vikas Chaudhary)- iscsi class: add bsg support to iscsi class (Mike Christie)- qla4xxx: add bsg support (Vikas Chaudhary) offload session login. (Manish Rangankar)- scsi_transport_iscsi: Add conn login, kernel to user, event to support- qla4xxx: support iscsiadm session mgmt (Manish Rangankar) Rangankar)- qla4xxx: Remove reduandant code after open-iscsi integration. (Manish- qla4xxx: Boot from SAN support for open-iscsi (Manish Rangankar)- scsi_transport_iscsi: Added support to update mtu (Vikas Chaudhary)- qla4xxx: Added support to update mtu (Vikas Chaudhary)- qla4xxx: Code cleanup for read/update flash using BSG (Harish Zunjarrao)- qla4xxx: Add get ACB state support using BSG (Harish Zunjarrao) Zunjarrao)- qla4xxx: Add read/update NVRAM support for 40xx adapters using BSG (Harish- qla4xxx: Added vendor specific sysfs attributes (Vikas Chaudhary) Chaudhary)- scsi_transport_iscsi: Added support to update initiator iscsi port (Vikas- qla4xxx: added support to update initiator iscsi port (Vikas Chaudhary)- qla4xxx: Added restore factory defaults support using BSG (Harish Zunjarrao)- qla4xxx: Added Get ACB support using BSG (Harish Zunjarrao)- scsi: Added support for adapter and firmware reset (Vikas Chaudhary)- qla4xxx: Added support for adapter and firmware reset (Vikas Chaudhary)- qla4xxx: export iface name (Mike Christie)- qla4xxx: Add new FLT firmware region (Nilesh Javali)- qla4xxx: Fix bidirectional CHAP. (Lalit Chandivade)- qla4xxx: Do not add duplicate CHAP entry in FLASH (Lalit Chandivade)- qla4xxx: Fix exporting boot targets to sysfs (Lalit Chandivade)- qla4xxx: Fix getting BIDI CHAP for boot targets (Lalit Chandivade)- qla4xxx: Free Device Database (DDB) reserved by FW (Lalit Chandivade)- qla4xxx: Clear DDB map index on the basis of AEN. (Manish Rangankar)- qla4xxx: Fixed session destroy issue on link up-down. (Manish Rangankar)- qla4xxx: Fixed device blocked issue on link up-down. (Manish Rangankar)- qla4xxx: Fixed active session re-open issue. (Manish Rangankar)- qla4xxx: Fixed target discovery failed issue. (Manish Rangankar)- qla4xxx: updated device id check for BFS. (Manish Rangankar)- qla4xxx: Update driver version to 5.02.00-k8 (Vikas Chaudhary)- iscsi class: fix link local mispelling (Mike Christie)- qla4xxx: fix data alignment and use nl helpers (Mike Christie)- iscsi class: fix vlan configuration (Mike Christie) Christie)- qla4xxx: export address/port of connection (fix udev disk names) (Mike- scsi: qla4xxx driver depends on NET (Randy Dunlap)- qla4xxx: select iscsi boot sysfs attrs (Mike Christie)- qla4xxx: Autologin persisted target entries. (Manish Rangankar)- iscsi class: export pid of process that created session (Mike Christie)- qla4xxx: Updated version to 5.02.00.00.06.02-uek0 (Lalit Chandivade)- [SCSI] mpt2sas MPI next revision header update (Kashyap, Desai)- [SCSI] mpt2sas: Set max_sector count from module parameter (Kashyap, Desai)- [SCSI] mpt2sas: fix broadcast AEN and task management issue (Kashyap, Desai)- [SCSI] mpt2sas: Bump version 09.100.00.00 (Kashyap, Desai) entry in MPI message (Kashyap, Desai)- [SCSI] mpt2sas: WarpDrive Infinite command retries due to wrong scsi command context (kashyap.desai)- [SCSI] mpt2sas: Added missing mpt2sas_base_detach call from scsih_remove- Remove unneeded version.h includes from drivers/scsi/ (Jesper Juhl) support of the HBA (nagalakshmi.nandigama)- [SCSI] mpt2sas: Added NUNA IO support in driver which uses multi-reply queue- [SCSI] mpt2sas: Bump driver version 09.100.00.01 (nagalakshmi.nandigama)- [SCSI] mpt2sas: take size of pointed value, not pointer (Julia Lawall)- [SCSI] mpt2sas: MPI next revision header update (nagalakshmi.nandigama)- [SCSI] mpt2sas: New feature - Fast Load Support (nagalakshmi.nandigama) (nagalakshmi.nandigama)- [SCSI] mpt2sas: Fix for system hang when discovery in progress (nagalakshmi.nandigama)- [SCSI] mpt2sas: Fix failure message displayed during diag reset removed while host reset is active (nagalakshmi.nandigama)- [SCSI] mpt2sas: Fix drives not getting properly deleted if sas cable is sas_device_lock (nagalakshmi.nandigama)- [SCSI] mpt2sas: Fix for dead lock occurring between host_lock and reset context (nagalakshmi.nandigama)- [SCSI] mpt2sas: Fix for deadlock between hot plug worker threads and host complete while issued during creating a volume (nagalakshmi.nandigama)- [SCSI] mpt2sas: Fix for issue Port Reset taking long time(around 5 mins) to (nagalakshmi.nandigama)- [SCSI] mpt2sas: Fix for Panic when inactive volume is tried deleting- [SCSI] mpt2sas: Bump driver version to 10.100.00.00 (nagalakshmi.nandigama)- [SCSI] mpt2sas: add missing allocation. (Dan Carpenter) context (Anton Blanchard)- [SCSI] mpt2sas: _scsih_smart_predicted_fault uses GFP_KERNEL in interrupt (nagalakshmi.nandigama)- [SCSI] mpt2sas: Better handling DEAD IOC (PCI-E LInk down) error condition to avoid infinite resets (nagalakshmi.nandigama)- [SCSI] mpt2sas: When IOs are terminated, update the result to DID_SOFT_ERROR (nagalakshmi.nandigama)- [SCSI] mpt2sas: Adding support for customer specific branding- [SCSI] mpt2sas: MPI next revision header update (nagalakshmi.nandigama) callback when all the LUNS have been deleted (nagalakshmi.nandigama)- [SCSI] mpt2sas: Do not set sas_device->starget to NULL from the slave_destroy (nagalakshmi.nandigama) initialized prior to sending the request to controller firmware- [SCSI] mpt2sas: Rearrange the the code so that the completion queues are- [SCSI] mpt2sas: Bump driver version to 11.100.00.00 (nagalakshmi.nandigama) (nagalakshmi.nandigama)- [SCSI] mpt2sas: Support for greater than 2TB capacity WarpDrive (nagalakshmi.nandigama)- [SCSI] mpt2sas: Increase max transfer support from 4MB to 16MB (nagalakshmi.nandigama)- [SCSI] mpt2sas: Added support for customer specific branding- [SCSI] mpt2sas: MPI next revision header update (nagalakshmi.nandigama) (nagalakshmi.nandigama)- [SCSI] mpt2sas: Release spinlock for the raid device list before blocking it (nagalakshmi.nandigama)- [SCSI] mpt2sas: Do not retry a timed out direct IO for warpdrive (nagalakshmi.nandigama)- [SCSI] mpt2sas : Fix for memory allocation error for large host credits- [SCSI] mpt2sas : Bump driver vesion to 12.100.00.00 (nagalakshmi.nandigama)- [SCSI] mpt2sas: Fix leak on mpt2sas_base_attach() error path (Roland Dreier)- [SCSI] mpt2sas: Fix possible integer truncation of cpu_count (Roland Dreier) Dreier)- [SCSI] mpt2sas: Remove unused duplicate diag_buffer_enable param (Roland _scsih_probe (nagalakshmi.nandigama)- [SCSI] mpt2sas: Removed redundant calling of _scsih_probe_devices() from- Btrfs: fix barrier flushes (Chris Mason)- btrfs: Fix up 32/64-bit compatibility for new ioctls (Jeff Mahoney)- btrfs: mirror_num should be int, not u64 (Jan Schmidt)- Btrfs: fix to search one more bitmap for cluster setup (Li Zefan)- Btrfs: avoid unnecessary bitmap search for cluster setup (Li Zefan)- btrfs: fix stat blocks accounting (David Sterba)- Btrfs: prefix resize related printks with btrfs: (Arnd Hannemann)- Btrfs: wait on caching if we\'re loading the free space cache (Josef Bacik)- Btrfs: clear pages dirty for io and set them extent mapped (Josef Bacik)- Btrfs: sectorsize align offsets in fiemap (Josef Bacik)- Btrfs: remove free-space-cache.c WARN during log replay (Chris Mason)- btrfs scrub: handle -ENOMEM from init_ipath() (Dan Carpenter)- Fix URL of btrfs-progs git repository in docs (Arnd Hannemann)- Btrfs: fix deadlock on metadata reservation when evicting a inode (Miao Xie)- Btrfs: Don\'t error on resizing FS to same size (Mike Fleetwood)- Btrfs: fix oops when calling statfs on readonly device (Li Zefan)- Btrfs: initialize new bitmaps\' list (Alexandre Oliva)- Btrfs: reset cluster\'s max_size when creating bitmap (Alexandre Oliva)- Btrfs: start search for new cluster at the beginning (Alexandre Oliva)- Btrfs: skip block groups without enough space for a cluster (Alexandre Oliva)- Btrfs: skip allocation attempt from empty cluster (Alexandre Oliva)- Btrfs: fix meta data raid-repair merge problem (Jan Schmidt) Oliva)- Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE (Alexandre- Btrfs: try cluster but don\'t advance in search list (Alexandre Oliva)- Btrfs: check if the to-be-added device is writable (Li Zefan)- Btrfs: drop spin lock when memory alloc fails (Liu Bo) Mason)- Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror (Chris- Btrfs: fix wrong i_size when truncating a file to a larger size (Miao Xie)- Btrfs: fix wrong disk space information of the files (Miao Xie)- Btrfs: fix inaccurate available space on raid0 profile (Miao Xie)- btrfs: keep orphans for subvolume deletion (Arne Jansen)- Btrfs: fix ctime update of on-disk inode (Li Zefan)- Btrfs: add a cond_resched() into the worker loop (Chris Mason)- BTRFS: Establish i_ops before calling d_instantiate (Casey Schaufler) Bacik)- Btrfs: fix num_workers_starting bug and other bugs in async thread (Josef- Btrfs: deal with enospc from dirtying inodes properly (Chris Mason) error (Josef Bacik)- Btrfs: fix how we do delalloc reservations and how we free reservations on- Btrfs: fix leaked space in truncate (Josef Bacik)- Btrfs: don\'t panic if orphan item already exists (Josef Bacik)- Btrfs: only set cache_generation if we setup the block group (Josef Bacik) Mason)- Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code (Chris- Btrfs: unplug every once and a while (Chris Mason)- scsi: qla_isr.c: fix comment typo \'hammmer\' (Justin P. Mattock)- qla2xxx: Basic infrastructure for dynamic logging. (Saurav Kashyap) Kashyap)- qla2xxx: Code changes to support new dynamic logging infrastructure. (Saurav- qla2xxx: Cleanup of previous infrastructure. (Saurav Kashyap)- qla2xxx: T10 DIF - Handle uninitalized sectors. (Arun Easi)- qla2xxx: T10 DIF - Fix incorrect error reporting. (Arun Easi)- qla2xxx: Fix qla24xx revision check while enabling interrupts. (Chad Dupuis)- qla2xxx: Acquire hardware lock while manipulating dsd list. (Saurav Kashyap) (Chad Dupuis)- qla2xxx: Double check for command completion if abort mailbox command fails. (Saurav Kashyap)- qla2xxx: Save and restore irq in the response queue interrupt handler.- qla2xxx: Set the task attributes after memsetting fcp cmnd. (Saurav Kashyap)- qla2xxx: Update version number to 8.03.07.07-k. (Chad Dupuis) (Giridhar Malavali)- qla2xxx: Add support for ISP82xx to capture dump (minidump) on failure.- qla2xxx: Implemeted beacon on/off for ISP82XX. (Saurav Kashyap) (Saurav Kashyap)- qla2xxx: Prevent CPU lockups when \"ql2xdontresethba\" module param is set. be changed dynamically. (Chad Dupuis)- qla2xxx: Enable write permission to some debug related module parameters to Kashyap)- qla2xxx: check for marker IOCB during response queue processing. (Saurav- qla2xxx: Fix array out of bound warning. (Saurav Kashyap)- qla2xxx: During loopdown perform Diagnostic loopback. (Saurav Kashyap)- qla2xxx: Correction to sysfs edc interface. (Joe Carnuccio)- qla2xxx: Provide method for updating I2C attached VPD. (Joe Carnuccio)- qla2xxx: Return sysfs error codes appropriate to conditions. (Joe Carnuccio) ISP82xx. (Giridhar Malavali)- qla2xxx: Issue mailbox command only when firmware hung bit is reset for- qla2xxx: Fix \"active_mask\" may be used uninitialized warning. (Chad Dupuis)- scsi: fix qla2xxx printk format warning (Randy Dunlap)- qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload (Roland Dreier)- qla2xxx: Correct inadvertent clearing of RISC_INTR status. (Andrew Vasquez)- qla2xxx: Remove qla2x00_wait_for_loop_ready function. (Saurav Kashyap)- qla2xxx: Check for SCSI status on underruns. (Arun Easi)- qla2xxx: Don\'t call alloc_fw_dump for ISP82XX. (Saurav Kashyap) Malavali)- qla2xxx: Revert back the request queue mapping to request queue 0. (Giridhar interrupt mode during firmware hang. (Giridhar Malavali)- qla2xxx: Stop unconditional completion of mailbox commands issued in Malavali)- qla2xxx: Enable Minidump by default with default capture mask 0x1f. (Giridhar recovery. (Andrew Vasquez)- qla2xxx: Return the correct value for a mailbox command if 82xx is in reset- qla2xxx: Display IPE error message for ISP82xx. (Chad Dupuis)- qla2xxx: Correct fc_host port_state display. (Saurav Kashyap) 0. (Giridhar Malavali)- qla2xxx: Submit all chained IOCBs for passthrough commands on request queue- qla2xxx: Update version number to 8.03.07.12-k. (Chad Dupuis)- qla2xxx: Use less stack to emit logging messages. (Joe Perches) current broken uses as appropriate. (Joe Perches)- qla2xxx: Make the logging functions verify their arguments and fixed the- qla2xxx: Update to dynamic logging. (Chad Dupuis) (Giridhar Malavali)- qla2xxx: Proper cleanup of pass through commands when firmware returns error.- qla2xxx: Only read requested mailbox registers. (Andrew Vasquez)- qla2xxx: Limit excessive DPC cycles. (Andrew Vasquez)- qla2xxx: Fix to include FCE data as part of dump. (Giridhar Malavali)- qla2xxx: Correct report-id acquisition check (Giridhar Malavali)- qla2xxx: Corrections to returned sysfs error codes. (Joe Carnuccio) mask. (Giridhar Malavali)- qla2xxx: Corrected the default setting of the help text of Minidump capture (Giridhar Malavali)- qla2xxx: Corrected the display of firmware dump availability for ISP82xx. (Giridhar Malavali)- qla2xxx: Added a new entry to ISP specific function pointers structure.- qla2xxx: Process marker IOCB request on request queue 0. (Giridhar Malavali)- qla2xxx: Consolidated IOCB processing routines. (Giridhar Malavali)- qla2xxx: Implement FCP priority tagging for 82xx adapters. (Saurav Kashyap) (Andrew Vasquez)- qla2xxx: Ensure there\'s enough request-queue space for passthru IOCBs. Dupuis)- qla2xxx: Move initialization of some variables before iospace_config. (Chad (Chad Dupuis)- qla2xxx: Do not check for minidump when device state is QLA82XX_DEV_READY.- SCSI, qla2xxx: remove redundant semicolon (Jesper Juhl) Anderson)- be2iscsi 4.1.239.0 [PATCH 01/10] Remove host and session casts (Chuck (Chuck Anderson)- be2iscsi 4.1.239.0 [PATCH 02/10] Fixing the /proc/interrupts problem V3- be2iscsi 4.1.239.0 [PATCH 03/10] Adding a shutdown Routine (Chuck Anderson)- be2iscsi 4.1.239.0 [PATCH 04/10] Add pci_disable device (Chuck Anderson)- be2iscsi 4.1.239.0 [PATCH 05/10] Fix for kdump failure (Chuck Anderson) Anderson)- be2iscsi 4.1.239.0 [PATCH 06/10] Fix for wrong dmsg setting in wrb (Chuck earlier (Chuck Anderson)- be2iscsi 4.1.239.0 [PATCH 07/10] Fix for case where task->sc was cleanedup Anderson)- be2iscsi 4.1.239.0 [PATCH 08/10] memset wrb for ring create (Chuck Anderson)- be2iscsi 4.1.239.0 [PATCH 09/10] Move driver Version to 4.1.239.0 (Chuck (Chuck Anderson)- be2iscsi 4.1.239.0 [PATCH 10/10] Fix in the ASYNC PDU handling code path.- qlcnic driver v5.0.25.1 for UEK2 2.6.39 (Chuck Anderson)
* Wed Nov 16 2011 Maxim Uvarov [2.6.39-100.0.17.el5uek]- Update Btrfs- turn on CONFIG_PARAVIRT_SPINLOCKS for bare metal- xen-gntalloc: signedness bug in add_grefs()- xen-gntalloc: integer overflow in gntalloc_ioctl_alloc()- xen-gntdev: integer overflow in gntdev_alloc_map()- xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs.- xen/balloon: Avoid OOM when requesting highmem- xen: Remove hanging references to CONFIG_XEN_PLATFORM_PCI
* Fri Nov 11 2011 Maxim Uvarov [2.6.39-100.0.16.el5uek]- SPEC: fixes for spec file [orabugs 13359985, 13339700, 13348381]- config: enable IP_PNP- Merge branch \'uek2-merge\' of git://oss.oracle.com/git/kwilk/xen into uek2-stable- ocfs2: Fix cleancache initialization call to correctly pass uuid- Merge branch \'stable/xen-block.rebase\' into uek2-merge- xen/blkback: Fix two races in the handling of barrier requests.- xen/blkback: Check for proper operation.- xen/blkback: Fix the inhibition to map pages when discarding sector ranges.- xen/blkback: Report VBD_WSECT (wr_sect) properly.- xen/blkback: Support \'feature-barrier\' aka old-style BARRIER requests.- xen-blkfront: plug device number leak in xlblk_init() error path- xen-blkfront: If no barrier or flush is supported, use invalid operation.- xen-blkback: use kzalloc() in favor of kmalloc()+memset()- xen-blkback: fixed indentation and comments- xen-blkfront: fix a deadlock while handling discard response- xen-blkfront: Handle discard requests.- xen-blkback: Implement discard requests (\'feature-discard\')- xen-blkfront: add BLKIF_OP_DISCARD and discard request struct- xen/blkback: Add module alias for autoloading- xen/blkback: Don\'t let in-flight requests defer pending ones.- Merge branch \'stable/xen-settime\' into uek2-merge- Merge branch \'stable/e820-3.2.rebased\' into uek2-merge- Merge branch \'stable/mmu.fixes.rebased\' into uek2-merge- Merge branch \'stable/drivers-3.2.rebased\' into uek2-merge- Merge branch \'stable/cleanups-3.2.rebased\' into uek2-merge- Merge branch \'stable/pci.fixes-3.2\' of git://oss.oracle.com/git/kwilk/xen into uek2-merge- Merge branch \'stable/bug.fixes-3.2.rebased\' of git://oss.oracle.com/git/kwilk/xen into uek2-merge- Merge branch \'stable/xen-pciback-0.6.3.bugfixes\' of git://oss.oracle.com/git/kwilk/xen into uek2-merge- xen/irq: If we fail during msi_capability_init return proper error code.- xen: remove XEN_PLATFORM_PCI config option- xen: XEN_PVHVM depends on PCI- xen/p2m/debugfs: Make type_name more obvious.- xen/p2m/debugfs: Fix potential pointer exception.- xen/enlighten: Fix compile warnings and set cx to known value.- xen/xenbus: Remove the unnecessary check.- xen/events: Don\'t check the info for NULL as it is already done.- xen/pci: Use \'acpi_gsi_to_irq\' value unconditionally.- xen/pci: Remove \'xen_allocate_pirq_gsi\'.- xen/pci: Retire unnecessary #ifdef CONFIG_ACPI- xen/pci: Move the allocation of IRQs when there are no IOAPIC\'s to the end- xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.- xen/pci: Use the xen_register_pirq for HVM and initial domain users- xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.- xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.- xen/pci: Update comments and fix empty spaces.- xen/pci: Shuffle code around.- xen/dom0: set wallclock time in Xen- xen: add dom0_op hypercall- xen/acpi: Domain0 acpi parser related platform hypercall- xen: release all pages within 1-1 p2m mappings- xen: allow extra memory to be in multiple regions- xen: allow balloon driver to use more than one memory region- xen/balloon: simplify test for the end of usable RAM- xen/balloon: account for pages released during memory setup- xen/e820: if there is no dom0_mem=, don\'t tweak extra_pages.- Revert \"xen/e820: if there is no dom0_mem=, don\'t tweak extra_pages.\"- xen/e820: if there is no dom0_mem=, don\'t tweak extra_pages.- xen: use maximum reservation to limit amount of usable RAM- xen: Fix misleading WARN message at xen_release_chunk- xen: Fix printk() format in xen/setup.c- xen/gntdev: Fix sleep-inside-spinlock- xen: modify kernel mappings corresponding to granted pages- xen: add an \"highmem\" parameter to alloc_xenballooned_pages- xen/p2m: Use SetPagePrivate and its friends for M2P overrides.- xen/p2m: Make debug/xen/mmu/p2m visible again.- Revert \"xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set.\"- xen/pciback: Check if the device is found instead of blindly assuming so.- xen/pciback: Do not dereference psdev during printk when it is NULL.- xen/pciback: double lock typo- xen/pciback: use mutex rather than spinlock in vpci backend- xen/pciback: Use mutexes when working with Xenbus state transitions.- xen/pciback: miscellaneous adjustments- xen/pciback: use mutex rather than spinlock in passthrough backend- xen/pciback: use resource_size()- xen: use static initializers in xen-balloon.c- Xen: fix braces and tabs coding style issue in xenbus_probe.c- Xen: fix braces coding style issue in xenbus_probe.h- Xen: fix whitespaces,tabs coding style issue in drivers/xen/pci.c- Xen: fix braces coding style issue in gntdev.c and grant-table.c- Xen: fix whitespaces,tabs coding style issue in drivers/xen/events.c- Xen: fix whitespaces,tabs coding style issue in drivers/xen/balloon.c
* Thu Oct 20 2011 Joe Jin [2.6.39-100.0.15.el5uek]- [scsi] cciss: Use cciss for some Smart Array controller when build for OL5- [Kconfig]: Add CONFIG_UEK5 option.
* Thu Oct 13 2011 Guru Anbalagane [2.6.39-100.0.14.el5uek]- Apply signature checking to modules on module load (David Howells)- Don\'t include .note.gnu.build-id in the digest (David Howells)- config: turn on module sign (Maxim Uvarov)- fix modpost port bug for module signatures (Maxim Uvarov)- xen: Fix selfballooning and ensure it doesn\'t go too far (Dan Magenheimer)- config: disable XEN_BALLOON_MEMORY_HOTPLUG- apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches (Jan Beulich)
* Tue Oct 11 2011 Maxim Uvarov [2.6.39-100.0.13.el5uek]- fix btrfs compilation for 32 bit- ext4 turn on CONFIG_LBDAF for 32bit kernel [orabug 12965485]- exec: do not call request_module() twice from search_binary_handler()- merge 3.0.6 patches
* Fri Sep 30 2011 Guru Anbalagane [2.6.39-100.0.12.el5uek]- audit: dynamically allocate audit_names when not enough spaceis in the names array [orabug 13038425]- update btrfs 3.0
* Thu Sep 29 2011 Guru Anbalagane [2.6.39-100.0.11.el5uek]- xen: Add bootmem.h in xen-selfballoon.c
* Thu Sep 29 2011 Guru Anbalagane [2.6.39-100.0.10.el5uek]- mpt2sas: Add a module parameter that permits overriding protection capabilities- mpt2sas: Return the correct sense key for DIF errors- mpt2sas: Do not check DIF for unwritten blocks- Revert \"xen/e820: if there is no dom0_mem=, don\'t tweak extra_pages.\"- Revert \"[AUDIT/workaround] Increase AUDIT_NAMES array len\" [orabug 13034299]- block: Rate-limit failed I/O error message [orabug 13007648]- config: disable panic on hardlockup [orabug 13007648]- ocfs2: update ocfs2 version [orabug 13017352]- x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode- bnx2x: prevent flooded warnning kernel info [orabug 12687487]- tg3: Dont dump DMA error when interface not ready [orabug 12981473]- xen: Fix selfballooning and ensure it doesn\'t go too far- ocfs2: Add datavolume mount option [orabug 13017352]
* Fri Sep 23 2011 Guru Anbalagane [2.6.39-100.0.9.el5uek]- generate -paravirt configs more accurate [orabug 13002151]- radeon: add missed firmwares [orabug 12981553]- ksplice: Clear garbage data on the kernel stack when handling signals- Add devel headers [orabug 13000607]
* Thu Sep 22 2011 Kevin Lyons [2.6.39-100.0.8.el5uek]- Add -u parameter to kernel_variant_post to make it work properly for uek [orabug 12965870]
* Wed Sep 21 2011 Guru Anbalagane [2.6.39-100.0.7.el5uek]- fix --noarch build- CONFIG: Add support for Large files - 32bit orabug 12984979
* Tue Sep 20 2011 Guru Anbalagane [2.6.39-100.0.6.el5uek]- rebase to 3.0.4- Build paravirt and paravirt-debug kernels- Remove commented out patches from spec- Specfile: build OCFS2- make XEN_MAX_DOMAIN_MEMORY selectable- config-debug: enable LOCKDEP and more debug options- Turn on CONFIG_CRYPTO_FIPS (Maxim Uvarov)- CONFIG: enable sysfs(el5) and xen memory hotplug- scsi: bump up SD_MAX_DISKS (Dave Kleikamp)- x86, acpi: Handle xapic/x2apic entries in MADT at same time (Yinghai Lu)
* Wed Sep 14 2011 Guru Anbalagane [2.6.39-100.0.5.el5uek]- xen: allow enable use of VGA console on dom0- xen: prepare tmem shim to handle frontswap- xen: Add __attribute__((format(printf... where appropriate- xen: Populate xenbus device attributes- xen: Add module alias to autoload backend drivers- xen: tmem: self-ballooning and frontswap-selfshrinking- xen/pci: Shuffle code around.- xen/pci: Update comments and fix empty spaces.- xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.- xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.- xen/pci: Use the xen_register_pirq for HVM and initial domain users- xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.- xen/pci: Move the allocation of IRQs when there are no IOAPIC\'s to the end- xen/pci: Retire unnecessary #ifdef CONFIG_ACPI- xen/pci: Remove \'xen_allocate_pirq_gsi\'.- xen/pci: Use \'acpi_gsi_to_irq\' value unconditionally.- xen/pciback: xen pci backend driver.- xen/pciback: Cleanup the driver based on checkpatch warnings and errors.- xen/pciback: Register the owner (domain) of the PCI device.- xen/pciback: guest SR-IOV support for PV guest- xen/pciback: Disable MSI/MSI-X when reseting a device- xen/pciback: Allocate IRQ handler for device that is shared with guest.- xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.- xen: rename pciback module to xen-pciback.- xen/pciback: Don\'t setup an fake IRQ handler for SR-IOV devices.- xen/pciback: Print out the MSI/MSI-X (PIRQ) values- xen/pciback: Drop two backends, squash and cleanup some code.- xen/pciback: Remove the DEBUG option.- xen/pciback: Have \'passthrough\' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI- mm: frontswap: swap data structure changes- mm: frontswap: core code- mm: frontswap: add swap hooks and extend try_to_unuse- mm: frontswap: config and doc files- xen:pvhvm: Modpost section mismatch fix- xen/pciback: remove duplicated #include- trace/xen: add skeleton for Xen trace events- xen/multicalls: remove debugfs stats- xen/trace: set up tracepoint skeleton- xen/trace: add multicall tracing- xen/trace: add mmu tracepoints- xen/trace: add ptpage alloc/release tracepoints- xen/trace: add xen_pgd_(un)pin tracepoints- xen/trace: add segment desc tracing- xen/trace: add tlb flush tracepoints- xen/mmu: use extend_args for more mmuext updates- xen/mmu: tune pgtable alloc/release- xen/multicalls: disable MC_DEBUG- xen/multicalls: add unlikely around slowpath in __xen_mc_entry()- xen/multicall: special-case singleton hypercalls- xen/multicall: move
*idx fields to start of mc_buffer- xen/trace: convert mmu events to use DECLARE_EVENT_CLASS()/DEFINE_EVENT()- xen/trace: use class for multicall trace- xen/tracing: fix compile errors when tracing is disabled.- xen/tracing: it looks like we wanted CONFIG_FTRACE- xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set- xen/tracing: Fix tracing config option properly- Input: xen-kbdfront - enable driver for HVM guests- xen/balloon: memory hotplug support for Xen balloon driver- mm: extend memory hotplug API to allow memory hotplug in virtual machines- xen/blkback: Add module alias for autoloading- xen/blkback: Don\'t let in-flight requests defer pending ones.- xen/netback: Add module alias for autoloading- xen: convert to 64 bit stats interface- xen/balloon: Fix compile errors - missing header files.- xen/self-balloon: Add dependency on tmem.- xen: xen-selfballoon.c needs more header files- xen/grant: Fix compile warning.- xen: Fix printk() format in xen/setup.c- xen: Fix misleading WARN message at xen_release_chunk- xen/x86: replace order-based range checking of M2P table by linear one- xen: Do not enable PV IPIs when vector callback not present- xen-blkfront: Fix one off warning about name clash- xen-blkfront: Drop name and minor adjustments for emulated scsi devices- xen/blkback: Make description more obvious.- xen-blkback: fixed indentation and comments- SCSI: Fix oops dereferencing queue- xen: use maximum reservation to limit amount of usable RAM- xen: x86_32: do not enable iterrupts when returning from exception in interrupt context- xen/smp: Warn user why they keel over - nosmp or noapic and what to use instead.- xen: disable PV spinlocks on HVM- xen/e820: if there is no dom0_mem=, don\'t tweak extra_pages.- config: from 6.1 and review- Revert \"IPC reduce lock contention in semctl\"- Revert \"IPC lock reduction corners\"- Revert \"use rwlocks for ipc\"- Revert \"ipc semaphores: order wakeups based on waiter CPU\"- Revert \"ipc semaphores: reduce ipc_lock contention in semtimedop
* Fri Aug 26 2011 Guru Anbalagane [2.6.39-100.0.4.el5uek]- revert makefile to 2.6.39
* Thu Aug 25 2011 Guru Anbalagane [2.6.39-100.0.3.el5uek]- Rebase to linux-3.0.3
* Fri Aug 12 2011 Guru Anbalagane [2.6.39-100.0.2.el5uek]- [AUDIT/workaround] Increase AUDIT_NAMES array len (Maxim Uvarov)- Increase kernel log buffer to 1MB (SHIFT=20)- export list of msi irqs into sysfs (Chris Mason)- memcg: mark init_section_page_cgroup() properly (Namhyung Kim)- memcg: fix init_page_cgroup nid with sparsemem (KAMEZAWA Hiroyuki)
* Sat Jul 30 2011 Guru Anbalagane [2.6.39-100.0.1.el5uek]- Linux 2.6.39.3- ipc semaphores: reduce ipc_lock contention in semtimedop- ipc semaphores: order wakeups based on waiter CPU- use rwlocks for ipc- IPC lock reduction corners- IPC reduce lock contention in semctl- Batched wakeups from ipc