Changelog for libvirt-0.8.7-18.0.1.el6.i686.rpm :

* Fri May 20 2011 Kevin Lyons - 0.8.7-18.0.1.el6- Replace docs/et.png in tarball with blank image- display check part in specfile for the build failure in mock environment
* Mon Apr 18 2011 Jiri Denemark - 0.8.7-18.el6- network: Fix NULL dereference during error recovery (rhbz#696660)- virsh: Fix regression in parsing optional integer (rhbz#693963)- util: Fix crash when removing entries during hash iteration (rhbz#693385)- Experimental libvirtd upstart job (rhbz#678084)
* Wed Apr 13 2011 Jiri Denemark - 0.8.7-17.el6- Don\'t return an error on failure to create blkio controller (rhbz#689030)- Fix possible infinite loop in remote driver (rhbz#691514)- qemu: Remove the managed state file only if restoring succeeded (rhbz#692998)- docs: Tweak virsh restore warning (rhbz#692998)
* Wed Apr 06 2011 Jiri Denemark - 0.8.7-16.el6- nwfilter: Enable rejection of packets (rhbz#681948)- Revert all previous error log priority hacks (rhbz#587603)- Filter out certain expected error messages from libvirtd (rhbz#587603)- qemu: Unlock qemu driver before return from domain save (rhbz#688774)- Do not send monitor command after monitor meet error (rhbz#688774)- qemu: Ignore libvirt debug messages in qemu log (rhbz#681492)- virsh: Fix memtune\'s help message for swap_hard_limit (rhbz#680190)- virsh: Fix documentation for memtune command (rhbz#680190)- docs: Fix typo (rhbz#680190)- Fix typo in systemtap tapset directory name (rhbz#693701)- qemu: Ignore unusable binaries (rhbz#676563)- qemu: Support for overriding NPROC limit (rhbz#674602)
* Tue Mar 29 2011 Jiri Denemark - 0.8.7-15.el6- Fix return value for virJSONValueFromString if it fails (rhbz#688723)- Fix positioning to end of qemu log file (rhbz#689986)- Initialization error of qemuCgroupData in Qemu host usb hotplug (rhbz#690183)- 8021Qbh: Use preassociate-rr during the migration prepare stage (rhbz#684870)- Make error reporting in libvirtd thread safe (rhbz#689374)- Add missing dependencies (rhbz#690022)- Fix restoring a compressed save image (rhbz#691034)- Fix label restore bugs in qemu driver (rhbz#690737)
* Tue Mar 22 2011 Jiri Denemark - 0.8.7-14.el6- Fix delayed events when SASL is active (rhbz#624252)- Fix ref-counting bugs (rhbz#688774)- Log an error if on failure to connect to netlink socket (rhbz#689001)- Log error and abort network startup when radvd isn\'t found (rhbz#688957)- Add PCI sysfs reset access rights to qemu (rhbz#689002)- Fix regression with qemu:///session URI (rhbz#684655)- Avoid leaking PCI config fd into qemu (rhbz#687993)
* Wed Mar 16 2011 Jiri Denemark - 0.8.7-13.el6- Properly report error in virConnectDomainXMLToNative (CVE-2011-1146)- Handle DNS over IPv6 (rhbz#687896)- Start dnsmasq even if no dhcp ranges/hosts are specified (rhbz#687291)- Use a separate dhcp leases file for each network (rhbz#687551)- Fix a possible crash in storage driver (rhbz#684712)
* Tue Mar 15 2011 Jiri Denemark - 0.8.7-12.el6- Fix vram settings for qxl graphics (rhbz#673578)- Free stream when domain shuts down while its console is open (rhbz#682741)- Use hardcoded python path in libvirt.py (rhbz#684204)- Add missing checks for read only connections (CVE-2011-1146)- Eliminate potential null pointer deref when auditing macvtap devices (rhbz#642785)- Insert error messages to avoid a quiet abortion of commands (rhbz#605660)
* Thu Mar 10 2011 Jiri Denemark - 0.8.7-11.el6- Support vram specification for qxl graphics (rhbz#673578)- Fix parsing int options in virsh (rhbz#639587)- Use -o encryption=on instead of -e for qemu-img (rhbz#676984)- Support domain snapshots with current QMP (rhbz#589076)- Update auditing support (rhbz#642785)- Only request sound cgroup ACL when required (rhbz#680398)- Allow fine-tuning of device ACL permissions (rhbz#683163)- Support vhost in attach-interface (rhbz#683276)- Don\'t request cgroup ACL access for /dev/net/tun (rhbz#683305)
* Mon Mar 07 2011 Jiri Denemark - 0.8.7-10.el6- Fix deadlock caused by a fix for rhbz#670848
* Fri Mar 04 2011 Jiri Denemark - 0.8.7-9.el6- Reorder nwfilter match extensions relative to state match (rhbz#678139)- Avoid overwriting error message in qemu driver (rhbz#678870)- Allow removing hash entries in virHashForEach (rhbz#681459)- Avoid double close on qemu domain restore (rhbz#672725)- Fix DomainObj refcounting/hashtable races in qemu driver (rhbz#670848)- Fix several memory leaks (rhbz#682249)
* Thu Feb 24 2011 Jiri Denemark - 0.8.7-8.el6- Fix --all flag of virsh freecell to really show all cells (rhbz#653530)- Add txmode attribute to interface XML for virtio backend (rhbz#629662)- Give each virtual network bridge its own fixed MAC address (rhbz#609463)- Fix virsh snapshot-list with --quiet option (rhbz#678833)- Delay IFF_UP\'ing 802.1Qbh interface until migration final stage (rhbz#678826)- Fix several memory bugs (rhbz#679164)- Fix virt-pki-validate when CERTTOOL is missing (rhbz#679153)- Fix memory corruption in virFileAbsPath (rhbz#680281)
* Thu Feb 17 2011 Jiri Denemark - 0.8.7-7.el6- Properly escape special characters in domain names (rhbz#676908)- Fix enum type declaration (rhbz#628940)- Fix cleanup on VM state after failed QEMU startup (rhbz#673588)- Fix XML generation for smartcards (rhbz#677308)- Ignore failure of \"qemu -M ?\" on older qemu (rhbz#676563)- Fix typo in setting up SPICE passwords (rhbz#677709)- Avoid NULL dereference in virDomainMemoryStats (rhbz#677484)- Avoid NULL dereference on error in qemu driver (rhbz#677493)- Fix error message when saving a shutoff domain (rhbz#677547)- Create enough volumes for mpath pool (rhbz#677231)- Allow to delete device mapper disk partition (rhbz#611443)
* Fri Feb 11 2011 Jiri Denemark - 0.8.7-6.el6- Fix typo in parsing of spice \'auth\' data (rhbz#676374)- Fix attach-interface regression (rhbz#676686)- Block I/O tunables via blkio cgroups controller (rhbz#632492)- Support SCSI RAID type & lower log level for unknown types (rhbz#675771)- Only initialize/cleanup libpciaccess once (rhbz#675698)- Imprint all logs with version + package build information (rhbz#673226)
* Fri Feb 04 2011 Jiri Denemark - 0.8.7-5.el6- Docs for customizable x509 certificate paths for client (rhbz#629510)- Fix tests for VNC over a unix domain socket (rhbz#651415)- Fix problems with peer-to-peer migration (rhbz#673434)- Fix tunneled migration broken since 0.8.7-2 (rhbz#672199)- Update docs for cpu_shares setting (rhbz#641187)- Fix possible hang if SASL is used (rhbz#672226)- Cancel migration in progress when virsh gets Ctrl-C (rhbz#635353)- Enhance virsh migrate command (rhbz#619039)- Support for specifying AIO mode for qemu disks (rhbz#591703)- Don\'t leave domain paused after restore (rhbz#670278)- Fix possible deadlock/crash in qemu driver (rhbz#673588)- Add shortcut for qemu HMP pass through (rhbz#628940)- Fix error message when attach device fails (rhbz#675030)- Support for booting from assigned PCI devices (rhbz#646895)- Improve handling of unlimited value for memory tunables (rhbz#669069)- Add smartcard support (rhbz#641834)- Remove some RHEL-specific patches which are no longer required (rhbz#653985)- Support for disabling/enabling KSM per domain (rhbz#635419)- Add --all flag to virsh freecell command (rhbz#653530)
* Thu Jan 27 2011 Jiri Denemark - 0.8.7-4.el6- Fix event-handling data race (rhbz#671567)- Add support for VNC over a unix domain socket (rhbz#651415)- Support intel \'ich6\' model (rhbz#648486)- Do not use virtio-serial port 0 for generic ports (rhbz#670394)- Set SELinux context label of pipes used for qemu migration (rhbz#667756)- Support customizable x509 certificate paths for client (rhbz#629510)- Round up capacity for LVM volume creation (rhbz#670529)- Show error prompt when trying to managed save a shutoff domain (rhbz#672449)- Report more proper error for unsupported graphics (rhbz#671319)- Expand the man page text for virsh setmaxmem (rhbz#622534)- Fix event-handling allocation crash (rhbz#671564)- Require --mac to avoid detach-interface ambiguity (rhbz#671050)
* Thu Jan 20 2011 Jiri Denemark - 0.8.7-3.el6- Report error if invalid type specified for character device (rhbz#638968)- Improve log for domain related APIs (rhbz#640202)- Reject SDL graphic if it\'s not supported by qemu (rhbz#633326)- Don\'t lose track of events when callbacks are slow (rhbz#624252)- Fail if per-device boot is used but deviceboot is not supported (rhbz#670399)- Avoid sending STOPPED event twice (rhbz#666158)- Fix issues introduced by dependency patches for rhbz#646895
* Mon Jan 17 2011 Jiri Denemark - 0.8.7-2.el6- Fix spec file which was not fully rebased to 0.8.7 (rhbz#653985, rhbz#660706)- Skip IB700 watchdog device when assigning PCI slots (rhbz#667091)- Improve error reporting when parsing dhcp info (rhbz#653300)- Don\'t chown saved image back to root if dynamic_ownership=0 (rhbz#661720)- Fix core dumps if unix_sock_group is set (rhbz#623166)- Add support for Westmere CPU model (rhbz#656248)- Add XML config switch to enable/disable vhost-net support (rhbz#643050)- Enable tuning of qemu network tap device \"sndbuf\" size (rhbz#665293)- Support for explicit boot device ordering (rhbz#646895)- Avoid qemu holding migration fd indefinitely (rhbz#620363)
* Sun Jan 09 2011 Jiri Denemark - 0.8.7-1.el6- Rebased to upstream 0.8.7 (rhbz#653985)- The following bugs got fixed by the rebase: rhbz#586124, rhbz#595350, rhbz#611793, rhbz#611822, rhbz#617439, rhbz#620363, rhbz#626873, rhbz#627143, rhbz#628772, rhbz#639595, rhbz#639603, rhbz#656795, rhbz#658657, rhbz#659855, rhbz#660706, rhbz#664406, rhbz#665446
* Thu Dec 23 2010 Jiri Denemark - 0.8.6-1.el6- Rebased to upstream 0.8.6 (rhbz#653985)
* Fri Dec 10 2010 Jiri Denemark - 0.8.1-29.el6- spec file cleanups (rhbz#649523)- Fix deadlock on concurrent multiple bidirectional migration (rhbz#659310)- Fix funny error in clock-variable (rhbz#660194)- Export host information through SMBIOS to guests (rhbz#526224)- Ensure device is deleted from guest after unplug (rhbz#644015)- Distinguish between QEMU domain shutdown and crash (rhbz#656845)
* Mon Nov 29 2010 Jiri Denemark - 0.8.1-28.el6- Fix JSON migrate_set_downtime command (rhbz#561935)- Make SASL work over UNIX domain sockets (rhbz#641687)- Let qemu group look below /var/lib/libvirt/qemu/ (rhbz#643407)- Fix save/restore on root_squashed NFS (rhbz#643884)- Fix race on multiple migration (rhbz#638285)- Export host information through SMBIOS to guests (rhbz#526224)- Support forcing a CDROM eject (rhbz#626305)
* Wed Aug 18 2010 Daniel Veillard - 0.8.1-27- build -26 hit a miscompilation error c.f. 624895 drop -j2- Resolves: rhbz#620847- Resolves: rhbz#623877
* Tue Aug 17 2010 Dave Allan - 0.8.1-26- Fix problem with capabilities XML generation- Resolves: rhbz#620847- Correctly reserve and release PCI slots- Resolves: rhbz#623877
* Sun Aug 15 2010 Daniel Veillard - 0.8.1-25- fix PXE booting on the virtual network- Resolves: rhbz#623951- fix tunelled migration- Resolves: rhbz#624062
* Thu Aug 12 2010 Daniel Veillard - 0.8.1-24- do not call balloon info command if balloon is desactivated- Resolves: rhbz#617286
* Wed Aug 11 2010 Daniel Veillard - 0.8.1-23- give a way to desactivate memory balloon support- Resolves: rhbz#617286
* Tue Aug 10 2010 Dave Allan - 0.8.1-22- Mitigate asynchronous device_del- Resolves: rhbz#609437- Fix PCI address allocation- Resolves: rhbz#618484- Make nodeinfo skip offline CPUs- Resolves: rhbz#622515
* Tue Aug 03 2010 Dave Allan - 0.8.1-21- Fix multiple PCI device assignment bugs- Resolves: rhbz#617116- Fix the ACS checking in the PCI code- Resolves: rhbz#615218- Disable boot=on when not using KVM- Resolves: rhbz#594068- Don\'t leak delay string when freeing virInterfaceBridgeDefs- Resolves: rhbz#620837
* Wed Jul 28 2010 Dave Allan - 0.8.1-20- Fix error message in guests init script when libvirtd isn\'t installed- Resolves: rhbz#617527
* Tue Jul 27 2010 Dave Allan - 0.8.1-19- Add character device backend activating QEMU internal spice agent- Resolves: rhbz#615757- Make libvirt-guests initscript Fedora compliant- Resolves: rhbz#617300
* Thu Jul 22 2010 Daniel Veillard - 0.8.1-18- Fix patch for PIIX3 slot 1 reservation, in case it\'s already reserved- Resolves: rhbz#592026
* Wed Jul 21 2010 Dave Allan - 0.8.1-17- Set a stable & high MAC addr for guest TAP devices- Resolves: rhbz#616517- Fix bogus commit of -16 patches- Related: rhbz#592026- Related: rhbz#599590
* Wed Jul 21 2010 Dave Allan - 0.8.1-16- Make PCI device ordering consistent with older releases- Resolves: rhbz#592026- Fix libvirtd hang during concurrent bi-directional migration- Resolves: rhbz#599590
* Wed Jul 14 2010 Dave Allan - 0.8.1-15- Add iptables rule to fixup DHCP response checksum- Resolves: rhbz#612588
* Tue Jul 13 2010 Dave Allan - 0.8.1-14- Support virtio disk hotplug in JSON mode- Resolves: rhbz#573946- Fix QEMU monitor JSON crash- Resolves: rhbz#604585- CVE-2010-2237 CVE-2010-2238 CVE-2010-2239- Resolves: rhbz#607817- CVE-2010-2242 Apply a source port mapping to virtual network masquerading- Resolves: rhbz#608049- Fix hang if QEMU exits (almost) immediately- Resolves: rhbz#610056- Support new CPU models provided by qemu-kvm- Resolves: rhbz#605830- Fix comparison of two host CPUs- Resolves: rhbz#611401- Don\'t mess with the CPU returned by arch driver- Resolves: rhbz#613014- Fail when CPU type cannot be detected from XML- Resolves: rhbz#613760- Use -nodefconfig when probing for CPU models- Resolves: rhbz#613764- cpuCompare: Fix crash on unexpected CPU XML- Resolves: rhbz#613765- Properly report failure to create raw storage volume files- Related: rhbz#547543- Fix IOErrorReasonCallback python bindings- Related: rhbz#586353- Parthelper: canonicalize block device paths- Related: rhbz#593785
* Wed Jun 30 2010 Dave Allan - 0.8.1-13- Don\'t invoke destroy callback from qemuMonitorOpen() failure paths (v2)- Related: rhbz#609060
* Tue Jun 29 2010 Dave Allan - 0.8.1-12- Don\'t invoke destroy callback from qemuMonitorOpen() failure paths- Resolves: rhbz#609060- virFileResolveLink: guarantee an absolute path- Resolves: rhbz#608092- SPICE patches have translatable strings without format args- Resolves: rhbz#608917- No way to pass disk format type to pool-define-as nor pool-create-as- Resolves: rhbz#597790- Fix enforcement of direction of traffic for rules describing incoming traffic- Resolves: rhbz#606889- Clarify virsh help pool-create-as text- Resolves: rhbz#609044
* Mon Jun 28 2010 Dave Allan - 0.8.1-11- Do not block during incoming migration- Resolves: rhbz#579440- Label serial devices- Resolves: rhbz#585249- parthelper: fix compilation without optimization- Related: rhbz#593785- Fix name/UUID uniqueness checking in storage/network- Resolves: rhbz#593951- Don\'t squash file permissions when migration fails- Resolves: rhbz#607922- Properly handle \'usbX\' sysfs files- Resolves: rhbz#603867- add pool support to vol-key command & improve vol commands help- Resolves: rhbz#598365- document attach-disk better- Resolves: rhbz#601143- Config iptables to allow tftp port if network element exists- Resolves: rhbz#607294- Fix failure to generate python bindings when libvirt.h.in is updated- Related: rhbz#589465- Allow all interface names- Resolves: rhbz#593907- Fix nodedevice refcounting- Resolves: rhbz#608753- Move nwfilter functions inside extern C and fix a locking bug- Resolves: rhbz#597391- Fix failure to restore qemu domains with selinux enforcing- Resolves: rhbz#590975- Check for presence of qemu -nodefconfig option before using it- Resolves: rhbz#608859
* Mon Jun 21 2010 Dave Allan - 0.8.1-10- Add multiIQN XML output- Resolves: rhbz#587700- Fix udev node device parent-child device relationships- Resolves: rhbz#593995- Fix leaks in udev device add/remove- Resolves: rhbz#595490- Fix device destroy return value- Resolves: rhbz#597998- Update nodedev scsi_host data before use- Resolves: rhbz#600048- Display wireless devices in nodedev list- Resolves: rhbz#604811- Show pool and domain persistence- Resolves: rhbz#603696- Fix cleanup after failing to hotplug a PCI device- Resolves: rhbz#605168- Add \'-nodefconfig\' command line arg to QEMU- Resolves: rhbz#602778- Switch to private redhat namespace for QMP I/O error reason- Resolves: rhbz#586353- Improve error messages for missing drivers & unsupported functions- Resolves: rhbz#595609- macvtap: get interface index if not provided- Resolves: rhbz#605187- Fix leaks in remote code- Resolves: rhbz#603442- Add an optional switch --uuid to the virsh vol-pool command- Resolves: rhbz#604929- Change per-connection hashes to be indexed by UUIDs- Resolves: rhbz#603494- Run virsh from libvirt-guests script with /dev/null on stdin- Resolves: rhbz#606314- Increase dd block size to speed up domain save- Resolves: rhbz#601775- Fix reference counting bugs on qemu monitor- Resolves: rhbz#602660- Add missing action parameter in IO error callback- Resolves: rhbz#607157
* Wed Jun 16 2010 Dave Allan - 0.8.1-9- Touch libvirt-guests lockfile- Resolves: rhbz#566647- Add qemu.conf option for clearing capabilities- Resolves: rhbz#593903- Add support for launching guest in paused state- Resolves: rhbz#589465- Add virsh vol-pool command- Resolves: rhbz#602217- Add vol commands to virsh man page- Resolves: rhbz#600640- Remove bogus migrate error messages- Resolves: rhbz#601575
* Thu Jun 10 2010 Dave Allan - 0.8.1-8- Ensure virtio serial has stable addressing- Resolves: rhbz#586665- SELinux socket labelling on QEMU monitor socket for MLS- Resolves: rhbz#593739- Fix enumeration of partitions in disks with a trailing digit in path- Resolves: rhbz#593785- Enable probing of VPC disk format type- Resolves: rhbz#597981- Delete UNIX domain sockets upon daemon shutdown- Resolves: rhbz#598163- Fix Migration failure \'canonical hostname pointed to localhost\'- Resolves: rhbz#589864- Fix up the python bindings for snapshotting- Resolves: rhbz#591839- Sanitize pool target paths- Resolves: rhbz#593565- Prevent host network conflicts- Resolves: rhbz#594494- Support 802.1Qbg and bh (vnlink/VEPA) (refresh)- Resolves: rhbz#590110
* Wed May 26 2010 Dave Allan - 0.8.1-7- Fix sign extension error in libvirt\'s parsing of qemu options- Resolves: rhbz#592070- Graceful shutdown/suspend of libvirt guests on host shutdown- Resolves: rhbz#566647- Fix pci device hotplug- Resolves: rhbz#572867- Support 802.1Qbg and bh- Resolves: rhbz#532760, rhbz#570949, rhbz#590110, rhbz#570923
* Wed May 19 2010 Dave Allan - 0.8.1-6- Support seamless migration of SPICE graphics clients (refresh)- Resolves: rhbz#591551- Fix swapping of PCI vendor & product names in udev backend- Resolves: rhbz#578419- Fix cgroup setup code to cope with root squashing NFS- Resolves: rhbz#593193- Fix startup error reporting race- Resolves: rhbz#591272
* Tue May 18 2010 Dave Allan - 0.8.1-5- Don\'t reset user/group/security label for any files on shared filesystems- Resolves: rhbz#578889- Make saved state labelling ignore the dynamic_ownership parameter- Resolves: rhbz#588562- Fix & protect against NULL pointer dereference in monitor code- Resolves: rhbz#591076- Fix virFileResolveLink return value- Resolves: rhbz#591363- Add support for SSE4.1 and SSE4.2 CPU features- Resolves: rhbz#592977
* Fri May 14 2010 Dave Allan - 0.8.1-4- query QEMU to get the actual allocated extent of a block device- Resolves: rhbz#526289
* Wed May 12 2010 Daniel Veillard - 0.8.1-3- missing python bindings due to older XML api- Resolves: rhbz#589453- Fix two possible crashes in JSON event dispatch- Resolves: rhbz#586353- Fix handling of disk backing stores with cgroups- Resolves: rhbz#581476- virsh schedinfo --set error handling on unknow parameters- Resolves: rhbz#586632- Apply extra patches for nwfilter- Resolves: rhbz#588554- Fix hang during concurrent guest migrations- Resolves: rhbz#582278
* Fri May 07 2010 Daniel Veillard - 0.8.1-2- Don\'t wipe generated iface target in active domains (588046)- Fix LXC domain lookup and error handling (586361)- Fix a protocol breakage introduced in libvirt-0.8.0- Add support for nic hotplug in QEMU/KVM (589978)- Seemless migration of spice graphics clients (589989)- fix build with ESX support- Resolves: rhbz#581966- fix multilib problem (587231)
* Fri Apr 30 2010 Daniel Veillard - 0.8.1-1- Rebase to upstream 0.8.1- Resolves: rhbz#558761
* Fri Apr 23 2010 Daniel Veillard - 0.8.0-4- Fix libvirtd startup when avahi failed to look up local host name- CPU selection fixes- Resolves: rhbz#581627- fix migration poll value- Resolves: rhbz#584928- crash dump job caused libvirt hang- Resolves: rhbz#580853- Fix initial VCPU pinning in qemu driver- Resolves: rhbz#578434- fix cpu hotplug command names
* Tue Apr 20 2010 Daniel Veillard - 0.8.0-3- Build ESX support in- Resolves: rhbz#581966- a batch of network filter fixes, IBM request and upstream fixes- Resolves: rhbz#579993- couple of patchs to fix device handling with QMP- Related: rhbz#563189- fix python binding for snapshotting- spec file fixes for nwfiler build and RHEL-5 virt-v2v specific rebuild
* Tue Apr 13 2010 Daniel P. Berrange - 0.8.0-2- Refresh SPICE patches to fix test failures- Related: rhbz#515265, rhbz#524623, rhbz#573382- Enable test suite during build, disabling tests that don\'t work in mock- Related: rhbz#558761
* Mon Apr 12 2010 Daniel Veillard - 0.8.0-1- official 0.8.0 upstream release- Resolves: rhbz#558761- new patch set of patches for RHEL-6 SPICE and addons- Enable QMP/ JSON mode in the QEMU monitor- Resolves: rhbz#563189- Support configuration of SPICE as a graphics protocol- Resolves: rhbz#515265- vnc (and spice) ticketing- Resolves: rhbz#524623- enable spice tls encryption in domainXML, and which channels are encrypted- Resolves: rhbz#573382- notification of VNC/SPICE client disconnect/connect events- Resolves: rhbz#515268
* Wed Apr 07 2010 Daniel Veillard - 0.8.0-0.pre20100407- preview #4 for 0.8.0 rebase- snapshot API- domain with disk on root-squashing nfs and security driver mismatch- Resolves: rhbz#578630- Fail to read xml when restore domain- Resolves: rhbz#577719- loop \"virsh cd\" in virsh interactive terminal generate unknown error- Resolves: rhbz#572380- support setting qemu\'s -drive werror=stop/enospc with configuration- Resolves: rhbz#526231
* Tue Mar 30 2010 Daniel Veillard - 0.7.8-0.pre20100330- preview #3 for 0.7.8 rebase- kvm hpet support- Resolves: rhbz#576973- hook scripts support- Resolves: rhbz#569965- Need to add time keeping abstraction- Resolves: rhbz#557285- notification of guest reboot- Resolves: rhbz#527572- Ability to preserve RTC clock adjustments across guest reboots- Resolves: rhbz#515273- Notifications of guest stopping due to disk I/O errors- Resolves: rhbz#515270- VNC ticketing support (524623) spice still needed- VNC client disconnect/connect events (515268) spice still needed
* Mon Mar 22 2010 Daniel Veillard - 0.7.8-0.pre20100322- preview #2 for 0.7.8 rebase- migration max downtime API- Resolves: rhbz#561935- allow suspend during migration- Resolves: rhbz#561934- support vhost net mode at qemu startup for net devices- Resolves: rhbz#540391- read-only device access support for qemu- Resolves: rhbz#556769- LSB compliance of libvirtd init script- Resolves: rhbz#538701- No domain vcpu information output when using JSON monitor- Resolves: rhbz#572051- \"qemudDomainSetMaxMemory\" does not work and should be removed- Resolves: rhbz#572146- after setvcpus, any virsh command will be hung- Resolves: rhbz#572193- virsh interactive terminal crash or hung- Resolves: rhbz#572376- virsh hangs after core dump- Resolves: rhbz#572544- Fix very slow file allocation on ext3
* Fri Mar 12 2010 Daniel Veillard - 0.7.8-0.pre20100312- preview for 0.7.8 rebase- Extra non upstream basic patch for spice and XQL- Resolves: rhbz#515264- Resolves: rhbz#515265- connected virsh dies with a SIGPIPE after libvirtd restart- Resolves: rhbz#526656- error when running logrotate on s/390x arch- Resolves: rhbz#547514
* Fri Mar 05 2010 Daniel Veillard - 0.7.7-1- macvtap support (rhbz#553348)- async job handling (rhbz #515278)- virtio channel (rhbz#515281)- computing baseline CPU- virDomain{Attach,Detach}DeviceFlags- Improve libvirt error reporting for failed migrations (rhbz#528793)- qemu driver support CPU hotplug (rhbz#533138)- wrong (octal) device number for attaching USB devices (rhbz#549840)- cannot save domain into root_squashing nfs export (rhbz#558763)- assorted bug fixes and lots of cleanups
* Wed Mar 03 2010 Daniel P. Berrange - 0.7.6-4- Fix balloon parameter name handling in JSON mode (rhbz #566261)
* Fri Feb 26 2010 Daniel P. Berrange - 0.7.6-3- Fix balloon units handling in JSON mode (rhbz #566261)- Invoke qmp_capabilities at monitor startup (rhbz #563189)
* Wed Feb 10 2010 Daniel Veillard - 0.7.6-2- enable JSON interface, desactivated by default in 0.7.6- Resolves: rhbz#563189- make sure cgroups are installed and that cgconfig service is on- Resolves: rhbz#531263
* Wed Feb 03 2010 Daniel Veillard - 0.7.6-1- upstream release of 0.7.6- Use QEmu new device adressing when possible- Implement CPU topology support for QEMU driver- Implement SCSI controller hotplug/unplug for QEMU- Implement support for multi IQN- a lot of fixes and improvements- Resolves: rhbz#558761
* Fri Jan 22 2010 Daniel Veillard - 0.7.6-0.pre20100121- push updated prerelease version of 0.7.6 for testing in Beta1- Resolves: rhbz#515213
* Thu Jan 21 2010 Daniel Veillard - 0.7.6-0.pre20100121- Push a prerelease version of 0.7.6 for testing in Beta1- Allow specifying -cpu model/flags for qemu- Resolves: rhbz#515213- Add async qemu machine protocol to libvirt based on JSON QEmu API- Resolves: rhbz#518701- Allow for static PCI address assignment to all devices- Resolves: rhbz#481924- expose qemu\'s -fda fat:floppy feature (525074)- configuration of virtual CPU topology (sockets, threads, cores) (538015)- rewrite file chown\'ing code to use security driver framework (547545 )- cannot create a headless KVM virtual machine (548127)- Improve virsh schedular parameters documentation (548485)- Fail to delete a inactive pool using command \"virsh pool-delete\" (530985)- virsh man page updation for using container (lxc:///) (528709)- Command \'virsh vcpuinfo\' returns libvirt error in RHEL6 with KVM (522829)- Expose information about host CPU flags in capabilities (518062)
* Fri Jan 15 2010 Daniel P. Berrange - 0.7.5-2- Rebuild for libparted soname change (rhbz #555741)
* Wed Dec 23 2009 Daniel Veillard - 0.7.5-1- Add new API virDomainMemoryStats- Public API and domain extension for CPU flags- vbox: Add support for version 3.1- Support QEMU\'s virtual FAT block device driver- a lot of fixes
* Fri Nov 20 2009 Daniel Veillard - 0.7.4-1- upstream release of 0.7.4- udev node device backend- API to check object properties- better QEmu monitor processing- MAC address based port filtering for qemu- support IPv6 and multiple addresses per interfaces- a lot of fixes
* Thu Nov 19 2009 Daniel P. Berrange - 0.7.2-6- Really fix restore file labelling this time
* Wed Nov 11 2009 Daniel P. Berrange - 0.7.2-5- Disable numactl on s390[x]. Again.
* Wed Nov 11 2009 Daniel P. Berrange - 0.7.2-4- Fix QEMU save/restore permissions / labelling
* Thu Oct 29 2009 Mark McLoughlin - 0.7.2-3- Avoid compressing small log files (#531030)
* Thu Oct 29 2009 Mark McLoughlin - 0.7.2-2- Make libvirt-devel require libvirt-client, not libvirt- Fix qemu machine types handling
* Wed Oct 14 2009 Daniel Veillard - 0.7.2-1- Upstream release of 0.7.2- Allow to define ESX domains- Allows suspend and resulme of LXC domains- API for data streams- many bug fixes
* Tue Oct 13 2009 Mark McLoughlin - 0.7.1-12- Fix restore of qemu guest using raw save format (#523158)
* Fri Oct 09 2009 Mark McLoughlin - 0.7.1-11- Fix libvirtd memory leak during error reply sending (#528162)- Add several PCI hot-unplug typo fixes from upstream
* Tue Oct 06 2009 Mark McLoughlin - 0.7.1-10- Create /var/log/libvirt/{lxc,uml} dirs for logrotate- Make libvirt-python dependon on libvirt-client- Sync misc minor changes from upstream spec
* Tue Oct 06 2009 Mark McLoughlin - 0.7.1-9- Change logrotate config to weekly (#526769)
* Thu Oct 01 2009 Mark McLoughlin - 0.7.1-8- Disable sound backend, even when selinux is disabled (#524499)- Re-label qcow2 backing files (#497131)
* Wed Sep 30 2009 Mark McLoughlin - 0.7.1-7- Fix USB device passthrough (#522683)
* Mon Sep 21 2009 Chris Weyl - 0.7.1-6- rebuild for libssh2 1.2
* Mon Sep 21 2009 Mark McLoughlin - 0.7.1-5- Don\'t set a bogus error in virDrvSupportsFeature()- Fix raw save format
* Thu Sep 17 2009 Mark McLoughlin - 0.7.1-4- A couple of hot-unplug memory handling fixes (#523953)
* Thu Sep 17 2009 Daniel Veillard - 0.7.1-3- disable numactl on s390[x]
* Thu Sep 17 2009 Daniel Veillard - 0.7.1-2- revamp of spec file for modularity and RHELs
* Tue Sep 15 2009 Daniel Veillard - 0.7.1-1- Upstream release of 0.7.1- ESX, VBox driver updates- mutipath support- support for encrypted (qcow) volume- compressed save image format for Qemu/KVM- QEmu host PCI device hotplug support- configuration of huge pages in guests- a lot of fixes
* Mon Sep 14 2009 Mark McLoughlin - 0.7.1-0.2.gitfac3f4c- Update to newer snapshot of 0.7.1- Stop libvirt using untrusted \'info vcpus\' PID data (#520864)- Support relabelling of USB and PCI devices- Enable multipath storage support- Restart libvirtd upon RPM upgrade
* Sun Sep 06 2009 Mark McLoughlin - 0.7.1-0.1.gitg3ef2e05- Update to pre-release git snapshot of 0.7.1- Drop upstreamed patches
* Wed Aug 19 2009 Mark McLoughlin - 0.7.0-6- Fix migration completion with newer versions of qemu (#516187)
* Wed Aug 19 2009 Mark McLoughlin - 0.7.0-5- Add PCI host device hotplug support- Allow PCI bus reset to reset other devices (#499678)- Fix stupid PCI reset error message (bug #499678)- Allow PM reset on multi-function PCI devices (bug #515689)- Re-attach PCI host devices after guest shuts down (bug #499561)- Fix list corruption after disk hot-unplug- Fix minor \'virsh nodedev-list --tree\' annoyance
* Thu Aug 13 2009 Daniel P. Berrange - 0.7.0-4- Rewrite policykit support (rhbz #499970)- Log and ignore NUMA topology problems (rhbz #506590)
* Mon Aug 10 2009 Mark McLoughlin - 0.7.0-3- Don\'t fail to start network if ipv6 modules is not loaded (#516497)
* Thu Aug 06 2009 Mark McLoughlin - 0.7.0-2- Make sure qemu can access kernel/initrd (bug #516034)- Set perms on /var/lib/libvirt/boot to 0711 (bug #516034)
* Wed Aug 05 2009 Daniel Veillard - 0.7.0-1- ESX, VBox3, Power Hypervisor drivers- new net filesystem glusterfs- Storage cloning for LVM and Disk backends- interface implementation based on netcf- Support cgroups in QEMU driver- QEmu hotplug NIC support- a lot of fixes
* Fri Jul 03 2009 Daniel Veillard - 0.6.5-1- release of 0.6.5
* Fri May 29 2009 Daniel Veillard - 0.6.4-1- release of 0.6.4- various new APIs
* Fri Apr 24 2009 Daniel Veillard - 0.6.3-1- release of 0.6.3- VirtualBox driver
* Fri Apr 03 2009 Daniel Veillard - 0.6.2-1- release of 0.6.2
* Wed Mar 04 2009 Daniel Veillard - 0.6.1-1- release of 0.6.1
* Sat Jan 31 2009 Daniel Veillard - 0.6.0-1- release of 0.6.0
* Tue Nov 25 2008 Daniel Veillard - 0.5.0-1- release of 0.5.0
* Tue Sep 23 2008 Daniel Veillard - 0.4.6-1- release of 0.4.6
* Mon Sep 08 2008 Daniel Veillard - 0.4.5-1- release of 0.4.5
* Wed Jun 25 2008 Daniel Veillard - 0.4.4-1- release of 0.4.4- mostly a few bug fixes from 0.4.3
* Thu Jun 12 2008 Daniel Veillard - 0.4.3-1- release of 0.4.3- lots of bug fixes and small improvements
* Tue Apr 08 2008 Daniel Veillard - 0.4.2-1- release of 0.4.2- lots of bug fixes and small improvements
* Mon Mar 03 2008 Daniel Veillard - 0.4.1-1- Release of 0.4.1- Storage APIs- xenner support- lots of assorted improvements, bugfixes and cleanups- documentation and localization improvements
* Tue Dec 18 2007 Daniel Veillard - 0.4.0-1- Release of 0.4.0- SASL based authentication- PolicyKit authentication- improved NUMA and statistics support- lots of assorted improvements, bugfixes and cleanups- documentation and localization improvements
* Sun Sep 30 2007 Daniel Veillard - 0.3.3-1- Release of 0.3.3- Avahi support- NUMA support- lots of assorted improvements, bugfixes and cleanups- documentation and localization improvements
* Tue Aug 21 2007 Daniel Veillard - 0.3.2-1- Release of 0.3.2- API for domains migration- APIs for collecting statistics on disks and interfaces- lots of assorted bugfixes and cleanups- documentation and localization improvements
* Tue Jul 24 2007 Daniel Veillard - 0.3.1-1- Release of 0.3.1- localtime clock support- PS/2 and USB input devices- lots of assorted bugfixes and cleanups- documentation and localization improvements
* Mon Jul 09 2007 Daniel Veillard - 0.3.0-1- Release of 0.3.0- Secure remote access support- unification of daemons- lots of assorted bugfixes and cleanups- documentation and localization improvements
* Fri Jun 08 2007 Daniel Veillard - 0.2.3-1- Release of 0.2.3- lot of assorted bugfixes and cleanups- support for Xen-3.1- new scheduler API
* Tue Apr 17 2007 Daniel Veillard - 0.2.2-1- Release of 0.2.2- lot of assorted bugfixes and cleanups- preparing for Xen-3.0.5
* Thu Mar 22 2007 Jeremy Katz - 0.2.1-2.fc7- don\'t require xen; we don\'t need the daemon and can control non-xen now- fix scriptlet error (need to own more directories)- update description text
* Fri Mar 16 2007 Daniel Veillard - 0.2.1-1- Release of 0.2.1- lot of bug and portability fixes- Add support for network autostart and init scripts- New API to detect the virtualization capabilities of a host- Documentation updates
* Fri Feb 23 2007 Daniel P. Berrange - 0.2.0-4.fc7- Fix loading of guest & network configs
* Fri Feb 16 2007 Daniel P. Berrange - 0.2.0-3.fc7- Disable kqemu support since its not in Fedora qemu binary- Fix for -vnc arg syntax change in 0.9.0 QEMU
* Thu Feb 15 2007 Daniel P. Berrange - 0.2.0-2.fc7- Fixed path to qemu daemon for autostart- Fixed generation of block in XML- Pre-create config directory at startup
* Wed Feb 14 2007 Daniel Veillard 0.2.0-1.fc7- support for KVM and QEmu- support for network configuration- assorted fixes
* Mon Jan 22 2007 Daniel Veillard 0.1.11-1.fc7- finish inactive Xen domains support- memory leak fix- RelaxNG schemas for XML configs
* Wed Dec 20 2006 Daniel Veillard 0.1.10-1.fc7- support for inactive Xen domains- improved support for Xen display and vnc- a few bug fixes- localization updates
* Thu Dec 07 2006 Jeremy Katz - 0.1.9-2- rebuild against python 2.5
* Wed Nov 29 2006 Daniel Veillard 0.1.9-1- better error reporting- python bindings fixes and extensions- add support for shareable drives- add support for non-bridge style networking- hot plug device support- added support for inactive domains- API to dump core of domains- various bug fixes, cleanups and improvements- updated the localization
* Tue Nov 07 2006 Daniel Veillard 0.1.8-3- it\'s pkgconfig not pgkconfig !
* Mon Nov 06 2006 Daniel Veillard 0.1.8-2- fixing spec file, added .el6, -devel requires pkgconfig and xen-devel- Resolves: rhbz#202320
* Mon Oct 16 2006 Daniel Veillard 0.1.8-1- fix missing page size detection code for ia64- fix mlock size when getting domain info list from hypervisor- vcpu number initialization- don\'t label crashed domains as shut off- fix virsh man page- blktapdd support for alternate drivers like blktap- memory leak fixes (xend interface and XML parsing)- compile fix- mlock/munlock size fixes
* Fri Sep 22 2006 Daniel Veillard 0.1.7-1- Fix bug when running against xen-3.0.3 hypercalls- Fix memory bug when getting vcpus info from xend
* Fri Sep 22 2006 Daniel Veillard 0.1.6-1- Support for localization- Support for new Xen-3.0.3 cdrom and disk configuration- Support for setting VNC port- Fix bug when running against xen-3.0.2 hypercalls- Fix reconnection problem when talking directly to http xend
* Tue Sep 05 2006 Jeremy Katz - 0.1.5-3- patch from danpb to support new-format cd devices for HVM guests
* Tue Sep 05 2006 Daniel Veillard 0.1.5-2- reactivating ia64 support
* Tue Sep 05 2006 Daniel Veillard 0.1.5-1- new release- bug fixes- support for new hypervisor calls- early code for config files and defined domains
* Mon Sep 04 2006 Daniel Berrange - 0.1.4-5- add patch to address dom0_ops API breakage in Xen 3.0.3 tree
* Mon Aug 28 2006 Jeremy Katz - 0.1.4-4- add patch to support paravirt framebuffer in Xen
* Mon Aug 21 2006 Daniel Veillard 0.1.4-3- another patch to fix network handling in non-HVM guests
* Thu Aug 17 2006 Daniel Veillard 0.1.4-2- patch to fix virParseUUID()
* Wed Aug 16 2006 Daniel Veillard 0.1.4-1- vCPUs and affinity support- more complete XML, console and boot options- specific features support- enforced read-only connections- various improvements, bug fixes
* Wed Aug 02 2006 Jeremy Katz - 0.1.3-6- add patch from pvetere to allow getting uuid from libvirt
* Wed Aug 02 2006 Jeremy Katz - 0.1.3-5- build on ia64 now
* Thu Jul 27 2006 Jeremy Katz - 0.1.3-4- don\'t BR xen, we just need xen-devel
* Thu Jul 27 2006 Daniel Veillard 0.1.3-3- need rebuild since libxenstore is now versionned
* Mon Jul 24 2006 Mark McLoughlin - 0.1.3-2- Add BuildRequires: xen-devel
* Wed Jul 12 2006 Jesse Keating - 0.1.3-1.1- rebuild
* Tue Jul 11 2006 Daniel Veillard 0.1.3-1- support for HVM Xen guests- various bugfixes
* Mon Jul 03 2006 Daniel Veillard 0.1.2-1- added a proxy mechanism for read only access using httpu- fixed header includes paths
* Wed Jun 21 2006 Daniel Veillard 0.1.1-1- extend and cleanup the driver infrastructure and code- python examples- extend uuid support- bug fixes, buffer handling cleanups- support for new Xen hypervisor API- test driver for unit testing- virsh --conect argument
* Mon Apr 10 2006 Daniel Veillard 0.1.0-1- various fixes- new APIs: for Node information and Reboot- virsh improvements and extensions- documentation updates and man page- enhancement and fixes of the XML description format
* Tue Feb 28 2006 Daniel Veillard 0.0.6-1- added error handling APIs- small bug fixes- improve python bindings- augment documentation and regression tests
* Thu Feb 23 2006 Daniel Veillard 0.0.5-1- new domain creation API- new UUID based APIs- more tests, documentation, devhelp- bug fixes
* Fri Feb 10 2006 Daniel Veillard 0.0.4-1- fixes some problems in 0.0.3 due to the change of names
* Wed Feb 08 2006 Daniel Veillard 0.0.3-1- changed library name to libvirt from libvir, complete and test the python bindings
* Sun Jan 29 2006 Daniel Veillard 0.0.2-1- upstream release of 0.0.2, use xend, save and restore added, python bindings fixed
* Wed Nov 02 2005 Daniel Veillard 0.0.1-1- created