| Name : XFree86-S3
| |
| Version : 3.3.6
| Vendor : Red Hat, Inc_
|
| Release : 33
| Date : 2000-08-20 08:11:41
|
| Group : User Interface/X Hardware Support
| Source RPM : XFree86-Servers-3.3.6-33.src.rpm
|
| Size : 3.72 MB
| |
| Packager : Red Hat, Inc_ < http://bugzilla_redhat_com/bugzilla>
| |
| Summary : The XFree86 server for video cards based on the S3 chip.
|
Description :
XFree86-S3 is the X server for video cards based on S3 chips,
including most Number Nine cards, many Diamond Stealth cards,
Orchid Fahrenheits, the Miro Crystal 8S, most STB cards, and some
motherboards with built-in graphics accelerators (such as the IBM
ValuePoint line). Note that if you have an S3 ViRGE based video
card, you\'ll need XFree86-S3V instead of XFree86-S3.
This is not a definitive list of all of the video cards supported by
this X server. Please see the XFree86 video card/server list available
from the XFree86 Project\'s website at http://www.xfree86.org for a
definitive list of X servers and which video cards they support.
If you are installing the X Window System and your video card uses the
XFree86-S3 X server, you should install XFree86-S3. You will also
need to install the following packages: XFree86, one or more of the
XFree86 fonts packages, X11R6-contrib, Xconfigurator, XFree86-xfs and
XFree86-libs. If you are going to develop applications that will run
as X clients, you will also need to install XFree86-devel.
|
RPM found in directory: /vol/rzm6/linux-redhat/linux/7.0/en/os/i386/RedHat/RPMS |
