| Name : nut-devel
| |
| Version : 2.2.1
| Vendor : SUSE LINUX Products GmbH, Nuemberg, Germany
|
| Release : 1.1
| Date : 2008-01-25 13:32:17
|
| Group : Hardware/UPS
| Source RPM : nut-2.2.1-1.1.src.rpm
|
| Size : 0.13 MB
| |
| Packager : Joe Morris < Joe_Morris_ntm_org>
| |
| Summary : UPS Monitoring Software
|
Description :
This is a developing project to monitor a large assortment of UPS
hardware. Many models have ports on the back to allow other devices to
check the status. If it gives basic information about the power and
battery status, it can probably be supported without too much
difficulty. More advanced features on the higher-end models are also
supported to allow tracking of values over time such as temperature and
voltage.
Network communications are used so that multiple systems can monitor a
single physical UPS and shut down together if necessary without any
special \"sharing hardware\" on the UPS itself. Detailed information
about supported hardware can be found in
/usr/share/doc/packages/nut/README.
_=====_
- APC Smart-UPS, Back-UPS Pro, Matrix-UPS, Belkin Regulator Pro,
Best Power Fortress, Fortress (FOR), Fortress Telecom (FTC),
Patriot Pro (PRO), Patriot Pro II (PR2), Engetron Jr, Fenton
Technologies PowerPal, PowerOn, PowerPure, Effekta MI/MT/MH
models (2502 cable), PowerGuard PG-600, IPT Anzen, MGE Pulsar,
MGE Pulsar/Comet/Galaxy, Mustek Electronics, Opti-UPS, Advice
Partner/King, PowerCom, Toshiba 1500 series, Trust (KingPro)
425/625, Microdowell BBox, IMV/Victron
- Many models that use the same basic principle to communicate with the
computer. See generic-ups.txt in /usr/share/doc/packages/nut for more
information, including a list of supported equipment.
Authors:
--------
Russell Kroll < rkrollAATTexploits.org>
Arnaud Quette < arnaud.quetteAATTmgeups.com>
Arjen de Korte < arjenAATTde-korte.org>
Fabio Di Niro < blaxwanAATTusers.sourceforge.net>
/usr/share/doc/packages/nut/README.
|
RPM found in directory: /packages/linux-pbone/ftp.gwdg.de/pub/linux/misc/suser-jmorris/suse103 |
