| Name : sensors-applet
| |
| Version : 2.2.7
| Vendor : obs://build_opensuse_org/home:Gankov
|
| Release : 2.1
| Date : 2016-05-08 23:16:46
|
| Group : System/Monitoring
| Source RPM : sensors-applet-2.2.7-2.1.src.rpm
|
| Size : 0.37 MB
| |
| Packager : (none)
| |
| Summary : A GNOME panel applet to monitor sensor information
|
Description :
GNOME Sensors Applet < http://sensors-applet.sourceforge.net/>
Author: Alex Murray < murray.alexAATTgmail.com>
GNOME Sensors Applet is an applet for the GNOME Panel to display
readings from hardware sensors, including CPU temperature, fan speeds
and voltage readings under Linux.
Supported interfaces:
* ACPI thermal zones, via the Linux kernel ACPI modules
* Linux kernel i2c[1] modules (for kernel 2.6).
* lm_sensors[1] and i2c[1] packages (for kernel 2.4)
* libsensors[1] (provided by lm_sensors package)
* Linux kernel i8k[2] module (for Dell Inspiron Laptops).
* Linux kernel ibm-acpi[3] module
* Linux kernel PowerPC modules therm_adt746x and therm_windtunnel.
* Linux kernel iMac G5 Windfarm module.
* hddtemp[4] daemon for reading temperatures from S.M.A.R.T. equipped disks.
* Linux kernel Omnibook[5] module.
* NVIDIA graphics cards via libNVCtrl (supplied with nvidia-settings[6])
* Linux kernel sonypi[7] module (for Sony Vaio laptops)
Includes a simple, yet highly customizable display and intuitive
user-interface.
Alarms can be set for each sensor to notify the user once a certain
high or low value has been reached, and can be configured to execute a
given command at given repeated intervals.
GNOME HIG v2.0 compliant
libnotify[8] support for alarm conditions
The icons bundled as part of GNOME Sensors Applet were created by
epicbard[9], and are released under the Creative Commons Attribution
Share-Alike license 3.0[10].
----------------------------------------------------------------------------
Requirements
* GNOME 2.8 desktop environment, with GTK >=2.4.0 and libpanelapplet-2
* For ACPI support:
o Linux kernel 2.6 with ACPI modules loaded (CONFIG_ACPI &
CONFIG_ACPI_THERMAL)
* For i2c support:
o Linux kernel 2.6 with appropriate i2c modules loaded OR
o Linux kernel 2.4 with lm_sensors and i2c packages installed
o libsensors support is available for either of the above (will
utilise settings in /etc/sensors.conf
* For i8k support:
o Linux kernel 2.6 with i8k module enabled (\"Support for
Dell laptops\" (CONFIG_I8K))
* For ibm-acpi support:
o Linux kernel >=2.6.10 with ibm-acpi module enabled
(CONFIG_IBM_ACPI)
* For PowerPC support:
o Linux kernel 2.6 with the therm_adt746x (\"Support for
thermal management on laptops with ADT 746x chipset\"
(THERM_ADT746X)) or therm_windtunnel (\"Support for thermal
management on Windtunnel G4s\" (THERM_WINDTUNNEL)) module
enabled
* For iMac G5 and other G5s support:
o Linux kernel 2.6 with the Windfarm (\"Support for thermal
management on iMac G5\" (WINDFARM_PM81)) module enabled
* For hddtemp support:
o hddtemp running in daemon mode
* For Omnibook support:
o Linux kernel 2.6 with the Omnibook module
* For NVIDIA graphics cards support:
o NVIDIA binary driver with libNVCtrl installed (provided
with the nvidia-settings utility) (to enable support GNOME
Sensors Applet needs to be configured with the --with-nvidia
flag)
* For sonypi support:
o Linux kernel 2.6 with sonypi module enabled (\"Sony Vaio
Programmable I/O Control Device support\" (CONFIG_SONYPI))
|
RPM found in directory: /packages/linux-pbone/ftp5.gwdg.de/pub/opensuse/repositories/home:/Gankov/SLE_11_SP4/x86_64 |
Hmm ... It's impossible ;-) This RPM doesn't exist on any FTP server
Provides :
libacpi.so()(64bit)
libeee.so()(64bit)
libhddtemp.so()(64bit)
libi2c-proc.so()(64bit)
libi2c-sys.so()(64bit)
libi8k.so()(64bit)
libibm-acpi.so()(64bit)
libomnibook.so()(64bit)
libpmu-sys.so()(64bit)
libsensors-applet-plugin.so.0()(64bit)
libsmu-sys.so()(64bit)
libsonypi.so()(64bit)
sensors-applet
Requires :
