Hmm ... It's impossible ;-) This RPM doesn't exist on any FTP server

Provides :
LinuxCNC
LinuxCNC(x86-64)
config(LinuxCNC)
libcanterp.so.0()(64bit)
liblinuxcnchal.so.0()(64bit)
liblinuxcncini.so.0()(64bit)
libnml.so.0()(64bit)
libposemath.so.0()(64bit)
libpyplugin.so.0()(64bit)
librs274.so.0()(64bit)
sysvinit(LinuxCNC_realtime)

Requires :

python-gst
libposemath.so.0()(64bit)
python-vte
python-xlib
libboost_python.so.1.59.0()(64bit)
/usr/bin/tclsh8.6
python-gtksourceview
python = 2.7
libstdc++.so.6(GLIBCXX_3.4)(64bit)
config(LinuxCNC) = 2.7.2-19.3
/usr/bin/wish
/usr/bin/python
libgtk-x11-2.0.so.0()(64bit)
python-tk
libgobject-2.0.so.0()(64bit)
python-numpy
libc.so.6(GLIBC_2.14)(64bit)
libc.so.6(GLIBC_2.2.5)(64bit)
libc.so.6(GLIBC_2.3.4)(64bit)
libpyplugin.so.0()(64bit)
libtinfo.so.6(NCURSES6_TINFO_5.0.19991023)(64bit)
bwidget
/bin/sh
libXmu.so.6()(64bit)
libgdk-x11-2.0.so.0()(64bit)
rpmlib(CompressedFileNames) <= 3.0.4-1
libmodbus.so.5()(64bit)
libtk8.6.so()(64bit)
libc.so.6(GLIBC_2.4)(64bit)
rpmlib(PayloadIsLzma) <= 4.4.6-1
librs274.so.0()(64bit)
libglib-2.0.so.0()(64bit)
python-gnome
libpango-1.0.so.0()(64bit)
libudev.so.1()(64bit)
libc.so.6()(64bit)
libudev.so.1(LIBUDEV_183)(64bit)
librt.so.1(GLIBC_2.2.5)(64bit)
libtinfo.so.6(NCURSES6_TINFO_5.7.20081102)(64bit)
librt.so.1()(64bit)
libstdc++.so.6(GLIBCXX_3.4.15)(64bit)
libGL.so.1()(64bit)
libpthread.so.0(GLIBC_2.3.4)(64bit)
libm.so.6(GLIBC_2.2.5)(64bit)
libpython2.7.so.1.0()(64bit)
/usr/bin/tclsh
libc.so.6(GLIBC_2.3.3)(64bit)
libstdc++.so.6(CXXABI_1.3.1)(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
tkimg
libreadline.so.6()(64bit)
liblinuxcncini.so.0()(64bit)
libncurses.so.6(NCURSEST6_5.7.20081102)(64bit)
python-pmw
libusb-1.0.so.0()(64bit)
tclx
libdl.so.2()(64bit)
python-imaging
libtinfo.so.6()(64bit)
libncurses.so.6()(64bit)
python(abi) = 2.7
libX11.so.6()(64bit)
libGLU.so.1()(64bit)
libstdc++.so.6()(64bit)
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
libpthread.so.0(GLIBC_2.2.5)(64bit)
libpthread.so.0()(64bit)
libc.so.6(GLIBC_2.8)(64bit)
liblinuxcnchal.so.0()(64bit)
python-configobj
libc.so.6(GLIBC_2.7)(64bit)
libXinerama.so.1()(64bit)
libc.so.6(GLIBC_2.15)(64bit)
libstdc++.so.6(GLIBCXX_3.4.9)(64bit)
libm.so.6()(64bit)
libc.so.6(GLIBC_2.3)(64bit)
libgcc_s.so.1()(64bit)
libdl.so.2(GLIBC_2.2.5)(64bit)
/bin/bash
libnml.so.0()(64bit)
/sbin/ldconfig

Content of RPM :
/etc/X11/app-defaults
/etc/X11/app-defaults/TkLinuxCNC
/etc/X11/app-defaults/XEmc
/etc/init.d/realtime
/etc/linuxcnc
/etc/linuxcnc/rtapi.conf
/usr/bin/5axisgui
/usr/bin/axis
/usr/bin/axis-remote
/usr/bin/classicladder
/usr/bin/debuglevel
/usr/bin/elbpcom
/usr/bin/genserkins
/usr/bin/gladevcp
/usr/bin/gladevcp_demo
/usr/bin/gmoccapy
/usr/bin/gremlin_view
/usr/bin/gs2_vfd
/usr/bin/gscreen
/usr/bin/hal-histogram
/usr/bin/hal_input
/usr/bin/hal_manualtoolchange
/usr/bin/halcmd
/usr/bin/halcompile
/usr/bin/halmeter
/usr/bin/halrmt
/usr/bin/halrun
/usr/bin/halsampler
/usr/bin/halscope
/usr/bin/halshow
There is 1920 files more in these RPM.