| Name : openocd-ftd2xx
| |
| Version : 0.7.0
| Vendor : obs://build_opensuse_org/home:rexut
|
| Release : oselas.11.214
| Date : 2019-02-07 02:57:33
|
| Group : Development/Tools/Debuggers
| Source RPM : openocd-ftd2xx-0.7.0-oselas.11.214.src.rpm
|
| Size : 6.43 MB
| |
| Packager : (none)
| |
| Summary : Open on-chip JTAG debug solution for ARM and MIPS systems
|
Description :
OpenOCD is an on-chip debugging, in-system programming and boundary-scan
testing tool for ARM and MIPS systems.
The debugger uses an IEEE 1149-1 compliant JTAG TAP bus master to access
on-chip debug functionality available on ARM based microcontrollers or
system-on-chip solutions. For MIPS systems the EJTAG interface is supported.
User interaction is realized through a telnet command line interface,
a gdb (the GNU debugger) remote protocol server, and a simplified RPC
connection that can be used to interface with OpenOCD\'s Jim Tcl engine.
OpenOCD supports various different types of JTAG interfaces/programmers:
* Parallel port wigglers:
* Macraigor Wiggler JTAG cable (and many clones)
* Xilinx DLC5 JTAG parallel cable III (and many clones)
* Amontec JTAG Accelerator
* Gateworks GW16012 JTAG programmer
* Wiggler 2 cable (basically a wiggler with an LED)
* Wiggler with NTRST inverted
* AMT Wiggler
* Ka-Ro TRITON starterkit II JTAG cable
* Lattice parallel port JTAG cable
* ST FlashLINK programming cable
* USB FT2232 based dongles:
* USBJTAG
* Amontec JTAGkey
* Amontec JTAGkey-Tiny
* OOCD-Link
* eVerve Signalyzer
* Luminary Micro Stellaris/LM3S811 Evaluation Board A
* Olimex ARM-USB-OCD
* TinCanTools Flyswatter
* Turtelizer 2
* Hitex STR9-comStick
* Hitex STM32-PerformanceStick
* Axiom AXM-0432 Link
* Section5 ICEbear
* ACH-JTAG
* USB JLINK based adapters:
* Atmel SAMICE (only works with Atmel chips)
* Segger J-Link
* IAR J-Link
* USB RLINK based adapters:
* Raisonance RLink
* STM32 Primer
* USB other:
* USBprog
* ASIX PRESTO
* Versaloon-Link
* ARM-JTAG-EW
* Standalone systems:
* Zylin ZY1000
* Other:
* EP93xx based Linux machine
* AT91RM9200
OpenOCD supports debugging on a number of different ARM/MIPS cores:
* ARM7:
* ARM7TDMI(-s)
* ARM720t
* ARM9:
* ARM9TDMI
* ARM920t
* ARM922t
* ARM926ej-s
* ARM966e-s
* ARM11
* ARM1136
* ARM1156
* ARM1176
* Intel XScale:
* PXA25x
* PXA26x
* PXA27x
* IXP42x
* IXP45x
* IXP46x
* Cortex-M3
* Luminary Stellaris LM3
* ST STM32
* MIPS m4k
* Marvell Feroceon CPU core (as found in the Orion SoC family)
Flash programming/writing is supported for:
* External CFI compatible flashes:
* Intel and AMD/Spansion command set
* Internal flashes:
* LPC2000
* AT91SAM7
* STR7x
* STR9x
* LM3
* STM32x
* LPC3180 NAND flash
|
RPM found in directory: /packages/linux-pbone/ftp5.gwdg.de/pub/opensuse/repositories/home:/rexut:/OSELAS/openSUSE_Factory/i586 |
Hmm ... It's impossible ;-) This RPM doesn't exist on any FTP server
Provides :
config(openocd-ftd2xx)
openocd-ftd2xx
openocd-ftd2xx(x86-32)
Requires :
