SEARCH
NEW RPMS
DIRECTORIES
ABOUT
FAQ
VARIOUS
BLOG

 
 

perl-Net-HTTP rpm build for : openSUSE Tumbleweed. For other distributions click perl-Net-HTTP.

Name : perl-Net-HTTP
Version : 6.23 Vendor : obs://build_opensuse_org/devel:languages:perl
Release : 1.10 Date : 2024-08-05 17:48:55
Group : Unspecified Source RPM : perl-Net-HTTP-6.23-1.10.src.rpm
Size : 0.07 MB
Packager : (none)
Summary : Low-level HTTP connection (client)
Description :
The \'Net::HTTP\' class is a low-level HTTP client. An instance of the
\'Net::HTTP\' class represents a connection to an HTTP server. The HTTP
protocol is described in RFC 2616. The \'Net::HTTP\' class supports
\'HTTP/1.0\' and \'HTTP/1.1\'.

\'Net::HTTP\' is a sub-class of one of \'IO::Socket::IP\' (IPv6+IPv4),
\'IO::Socket::INET6\' (IPv6+IPv4), or \'IO::Socket::INET\' (IPv4 only). You can
mix the methods described below with reading and writing from the socket
directly. This is not necessary a good idea, unless you know what you are
doing.

The following methods are provided (in addition to those of
\'IO::Socket::INET\'):

* \'$s = Net::HTTP->new( %options )\'

The \'Net::HTTP\' constructor method takes the same options as
\'IO::Socket::INET\'\'s as well as these:

Host: Initial host attribute value
KeepAlive: Initial keep_alive attribute value
SendTE: Initial send_te attribute_value
HTTPVersion: Initial http_version attribute value
PeerHTTPVersion: Initial peer_http_version attribute value
MaxLineLength: Initial max_line_length attribute value
MaxHeaderLines: Initial max_header_lines attribute value

The \'Host\' option is also the default for \'IO::Socket::INET\'\'s \'PeerAddr\'.
The \'PeerPort\' defaults to 80 if not provided. The \'PeerPort\' specification
can also be embedded in the \'PeerAddr\' by preceding it with a \":\", and
closing the IPv6 address on brackets \"[]\" if necessary:
\"192.0.2.1:80\",\"[2001:db8::1]:80\",\"any.example.com:80\".

The \'Listen\' option provided by \'IO::Socket::INET\'\'s constructor method is
not allowed.

If unable to connect to the given HTTP server then the constructor returns
\'undef\' and $AATT contains the reason. After a successful connect, a
\'Net:HTTP\' object is returned.

* \'$s->host\'

Get/set the default value of the \'Host\' header to send. The $host must not
be set to an empty string (or \'undef\') for HTTP/1.1.

* \'$s->keep_alive\'

Get/set the _keep-alive_ value. If this value is TRUE then the request will
be sent with headers indicating that the server should try to keep the
connection open so that multiple requests can be sent.

The actual headers set will depend on the value of the \'http_version\' and
\'peer_http_version\' attributes.

* \'$s->send_te\'

Get/set the a value indicating if the request will be sent with a \"TE\"
header to indicate the transfer encodings that the server can choose to
use. The list of encodings announced as accepted by this client depends on
availability of the following modules: \'Compress::Raw::Zlib\' for _deflate_,
and \'IO::Compress::Gunzip\' for _gzip_.

* \'$s->http_version\'

Get/set the HTTP version number that this client should announce. This
value can only be set to \"1.0\" or \"1.1\". The default is \"1.1\".

* \'$s->peer_http_version\'

Get/set the protocol version number of our peer. This value will initially
be \"1.0\", but will be updated by a successful read_response_headers()
method call.

* \'$s->max_line_length\'

Get/set a limit on the length of response line and response header lines.
The default is 8192. A value of 0 means no limit.

* \'$s->max_header_length\'

Get/set a limit on the number of header lines that a response can have. The
default is 128. A value of 0 means no limit.

* \'$s->format_request($method, $uri, %headers, [$content])\'

Format a request message and return it as a string. If the headers do not
include a \'Host\' header, then a header is inserted with the value of the
\'host\' attribute. Headers like \'Connection\' and \'Keep-Alive\' might also be
added depending on the status of the \'keep_alive\' attribute.

If $content is given (and it is non-empty), then a \'Content-Length\' header
is automatically added unless it was already present.

* \'$s->write_request($method, $uri, %headers, [$content])\'

Format and send a request message. Arguments are the same as for
format_request(). Returns true if successful.

* \'$s->format_chunk( $data )\'

Returns the string to be written for the given chunk of data.

* \'$s->write_chunk($data)\'

Will write a new chunk of request entity body data. This method should only
be used if the \'Transfer-Encoding\' header with a value of \'chunked\' was
sent in the request. Note, writing zero-length data is a no-op. Use the
write_chunk_eof() method to signal end of entity body data.

Returns true if successful.

* \'$s->format_chunk_eof( %trailers )\'

Returns the string to be written for signaling EOF when a
\'Transfer-Encoding\' of \'chunked\' is used.

* \'$s->write_chunk_eof( %trailers )\'

Will write eof marker for chunked data and optional trailers. Note that
trailers should not really be used unless is was signaled with a \'Trailer\'
header.

Returns true if successful.

* \'($code, $mess, %headers) = $s->read_response_headers( %opts )\'

Read response headers from server and return it. The $code is the 3 digit
HTTP status code (see HTTP::Status) and $mess is the textual message that
came with it. Headers are then returned as key/value pairs. Since key
letter casing is not normalized and the same key can even occur multiple
times, assigning these values directly to a hash is not wise. Only the
$code is returned if this method is called in scalar context.

As a side effect this method updates the \'peer_http_version\' attribute.

Options might be passed in as key/value pairs. There are currently only two
options supported; \'laxed\' and \'junk_out\'.

The \'laxed\' option will make read_response_headers() more forgiving towards
servers that have not learned how to speak HTTP properly. The \'laxed\'
option is a boolean flag, and is enabled by passing in a TRUE value. The
\'junk_out\' option can be used to capture bad header lines when \'laxed\' is
enabled. The value should be an array reference. Bad header lines will be
pushed onto the array.

The \'laxed\' option must be specified in order to communicate with
pre-HTTP/1.0 servers that don\'t describe the response outcome or the data
they send back with a header block. For these servers peer_http_version is
set to \"0.9\" and this method returns (200, \"Assumed OK\").

The method will raise an exception (die) if the server does not speak
proper HTTP or if the \'max_line_length\' or \'max_header_length\' limits are
reached. If the \'laxed\' option is turned on and \'max_line_length\' and
\'max_header_length\' checks are turned off, then no exception will be raised
and this method will always return a response code.

* \'$n = $s->read_entity_body($buf, $size);\'

Reads chunks of the entity body content. Basically the same interface as
for read() and sysread(), but the buffer offset argument is not supported
yet. This method should only be called after a successful
read_response_headers() call.

The return value will be \'undef\' on read errors, 0 on EOF, -1 if no data
could be returned this time, otherwise the number of bytes assigned to
$buf. The $buf is set to \"\" when the return value is -1.

You normally want to retry this call if this function returns either -1 or
\'undef\' with \'$!\' as EINTR or EAGAIN (see Errno). EINTR can happen if the
application catches signals and EAGAIN can happen if you made the socket
non-blocking.

This method will raise exceptions (die) if the server does not speak proper
HTTP. This can only happen when reading chunked data.

* \'%headers = $s->get_trailers\'

After read_entity_body() has returned 0 to indicate end of the entity body,
you might call this method to pick up any trailers.

* \'$s->_rbuf\'

Get/set the read buffer content. The read_response_headers() and
read_entity_body() methods use an internal buffer which they will look for
data before they actually sysread more from the socket itself. If they read
too much, the remaining data will be left in this buffer.

* \'$s->_rbuf_length\'

Returns the number of bytes in the read buffer. This should always be the
same as:

length($s->_rbuf)

but might be more efficient.

RPM found in directory: /packages/linux-pbone/ftp5.gwdg.de/pub/opensuse/repositories/devel:/languages:/perl:/CPAN-N/openSUSE_Tumbleweed/noarch

Content of RPM  Provides Requires

Download
ftp.icm.edu.pl  perl-Net-HTTP-6.23-1.10.noarch.rpm
     

Provides :
perl(Net::HTTP)
perl(Net::HTTP::Methods)
perl(Net::HTTP::NB)
perl(Net::HTTPS)
perl-Net-HTTP

Requires :
perl(:MODULE_COMPAT_5.40.0)
perl(Compress::Raw::Zlib)
perl(IO::Uncompress::Gunzip)
perl(URI)
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rpmlib(PayloadIsZstd) <= 5.4.18-1


Content of RPM :
/usr/lib/perl5/vendor_perl/5.40.0/Net
/usr/lib/perl5/vendor_perl/5.40.0/Net/HTTP
/usr/lib/perl5/vendor_perl/5.40.0/Net/HTTP.pm
/usr/lib/perl5/vendor_perl/5.40.0/Net/HTTP/Methods.pm
/usr/lib/perl5/vendor_perl/5.40.0/Net/HTTP/NB.pm
/usr/lib/perl5/vendor_perl/5.40.0/Net/HTTPS.pm
/usr/share/doc/packages/perl-Net-HTTP
/usr/share/doc/packages/perl-Net-HTTP/CONTRIBUTORS
/usr/share/doc/packages/perl-Net-HTTP/Changes
/usr/share/doc/packages/perl-Net-HTTP/README.md
/usr/share/licenses/perl-Net-HTTP
/usr/share/licenses/perl-Net-HTTP/LICENSE
/usr/share/man/man3/Net::HTTP.3pm.gz
/usr/share/man/man3/Net::HTTP::Methods.3pm.gz
/usr/share/man/man3/Net::HTTP::NB.3pm.gz
/usr/share/man/man3/Net::HTTPS.3pm.gz

 
ICM