| Name : qtools
| |
| Version : 0.0.0.git1529935848.20180625
| Vendor : obs://build_opensuse_org/home:mnhauke
|
| Release : 1.101
| Date : 2018-09-16 15:22:32
|
| Group : Hardware/Modem
| Source RPM : qtools-0.0.0.git1529935848.20180625-1.101.src.rpm
|
| Size : 4.11 MB
| |
| Packager : (none)
| |
| Summary : Toolset for Qualcomm Baseband Modems
|
Description :
A set of tools for working with flash modems on the Qualcomm chipset
The set consists of a package of utilities and a set of patched loaders.
* qcommand is an interactive terminal for entering commands through the
command port. Goes to replace the very inconvenient revskills.
Allows you to enter byte byte command packets, edit memory, read and
view any flash sector.
* qrmem - program for reading the dump of the address space of the modem.
* qrflash is a program for reading flash. Can read both the range of blocks
and sections on the partition map.
* qwflash is a program for writing partition images via the user partitions
mode of the loader, similar to QPST.
* qwdirect - the program for direct recording of flash drive blocks
with / without OOB via the controller ports (without the participation of
the bootloader logic).
* qdload - program for downloading loaders. Requires the modem to be in
download mode or emergency boot mode PBL.
* dload.sh - script for transferring the modem to the load mode and sending
the specified loader to it.
The programs require modified versions of the loaders. They are collected
in the loaders directory, and the patch source is in cmd_05_write_patched.asm.
|
RPM found in directory: /packages/linux-pbone/ftp5.gwdg.de/pub/opensuse/repositories/home:/mnhauke:/modem-tools/openSUSE_Tumbleweed/x86_64 |
